| 1. |
- Ruilope, LM, et al.
(författare)
-
Design and Baseline Characteristics of the Finerenone in Reducing Cardiovascular Mortality and Morbidity in Diabetic Kidney Disease Trial
- 2019
-
Ingår i: American journal of nephrology. - : S. Karger AG. - 1421-9670 .- 0250-8095. ; 50:5, s. 345-356
-
Tidskriftsartikel (refereegranskat)abstract
- <b><i>Background:</i></b> Among people with diabetes, those with kidney disease have exceptionally high rates of cardiovascular (CV) morbidity and mortality and progression of their underlying kidney disease. Finerenone is a novel, nonsteroidal, selective mineralocorticoid receptor antagonist that has shown to reduce albuminuria in type 2 diabetes (T2D) patients with chronic kidney disease (CKD) while revealing only a low risk of hyperkalemia. However, the effect of finerenone on CV and renal outcomes has not yet been investigated in long-term trials. <b><i>Patients and</i></b> <b><i>Methods:</i></b> The Finerenone in Reducing CV Mortality and Morbidity in Diabetic Kidney Disease (FIGARO-DKD) trial aims to assess the efficacy and safety of finerenone compared to placebo at reducing clinically important CV and renal outcomes in T2D patients with CKD. FIGARO-DKD is a randomized, double-blind, placebo-controlled, parallel-group, event-driven trial running in 47 countries with an expected duration of approximately 6 years. FIGARO-DKD randomized 7,437 patients with an estimated glomerular filtration rate ≥25 mL/min/1.73 m<sup>2</sup> and albuminuria (urinary albumin-to-creatinine ratio ≥30 to ≤5,000 mg/g). The study has at least 90% power to detect a 20% reduction in the risk of the primary outcome (overall two-sided significance level α = 0.05), the composite of time to first occurrence of CV death, nonfatal myocardial infarction, nonfatal stroke, or hospitalization for heart failure. <b><i>Conclusions:</i></b> FIGARO-DKD will determine whether an optimally treated cohort of T2D patients with CKD at high risk of CV and renal events will experience cardiorenal benefits with the addition of finerenone to their treatment regimen. Trial Registration: EudraCT number: 2015-000950-39; ClinicalTrials.gov identifier: NCT02545049.
|
|
| 2. |
- Rauer, H., et al.
(författare)
-
The PLATO 2.0 mission
- 2014
-
Ingår i: Experimental astronomy. - : Springer Science and Business Media LLC. - 0922-6435 .- 1572-9508. ; 38:1-2, s. 249-330
-
Tidskriftsartikel (refereegranskat)abstract
- PLATO 2.0 has recently been selected for ESA's M3 launch opportunity (2022/24). Providing accurate key planet parameters (radius, mass, density and age) in statistical numbers, it addresses fundamental questions such as: How do planetary systems form and evolve? Are there other systems with planets like ours, including potentially habitable planets? The PLATO 2.0 instrument consists of 34 small aperture telescopes (32 with 25 s readout cadence and 2 with 2.5 s cadence) providing a wide field-of-view (2232 deg(2)) and a large photometric magnitude range (4-16 mag). It focuses on bright (4-11 mag) stars in wide fields to detect and characterize planets down to Earth-size by photometric transits, whose masses can then be determined by ground-based radial-velocity follow-up measurements. Asteroseismology will be performed for these bright stars to obtain highly accurate stellar parameters, including masses and ages. The combination of bright targets and asteroseismology results in high accuracy for the bulk planet parameters: 2 %, 4-10 % and 10 % for planet radii, masses and ages, respectively. The planned baseline observing strategy includes two long pointings (2-3 years) to detect and bulk characterize planets reaching into the habitable zone (HZ) of solar-like stars and an additional step-and-stare phase to cover in total about 50 % of the sky. PLATO 2.0 will observe up to 1,000,000 stars and detect and characterize hundreds of small planets, and thousands of planets in the Neptune to gas giant regime out to the HZ. It will therefore provide the first large-scale catalogue of bulk characterized planets with accurate radii, masses, mean densities and ages. This catalogue will include terrestrial planets at intermediate orbital distances, where surface temperatures are moderate. Coverage of this parameter range with statistical numbers of bulk characterized planets is unique to PLATO 2.0. The PLATO 2.0 catalogue allows us to e. g.: - complete our knowledge of planet diversity for low-mass objects, - correlate the planet mean density-orbital distance distribution with predictions from planet formation theories,- constrain the influence of planet migration and scattering on the architecture of multiple systems, and - specify how planet and system parameters change with host star characteristics, such as type, metallicity and age. The catalogue will allow us to study planets and planetary systems at different evolutionary phases. It will further provide a census for small, low-mass planets. This will serve to identify objects which retained their primordial hydrogen atmosphere and in general the typical characteristics of planets in such a low-mass, low-density range. Planets detected by PLATO 2.0 will orbit bright stars and many of them will be targets for future atmosphere spectroscopy exploring their atmospheres. Furthermore, the mission has the potential to detect exomoons, planetary rings, binary and Trojan planets. The planetary science possible with PLATO 2.0 is complemented by its impact on stellar and galactic science via asteroseismology as well as light curves of all kinds of variable stars, together with observations of stellar clusters of different ages. This will allow us to improve stellar models and study stellar activity. A large number of well-known ages from red giant stars will probe the structure and evolution of our Galaxy. Asteroseismic ages of bright stars for different phases of stellar evolution allow calibrating stellar age-rotation relationships. Together with the results of ESA's Gaia mission, the results of PLATO 2.0 will provide a huge legacy to planetary, stellar and galactic science.
|
|
| 3. |
|
|
| 4. |
- Wang, Anqi, et al.
(författare)
-
Characterizing prostate cancer risk through multi-ancestry genome-wide discovery of 187 novel risk variants
- 2023
-
Ingår i: Nature Genetics. - : Springer Nature. - 1061-4036 .- 1546-1718. ; 55:12, s. 2065-2074
-
Tidskriftsartikel (refereegranskat)abstract
- The transferability and clinical value of genetic risk scores (GRSs) across populations remain limited due to an imbalance in genetic studies across ancestrally diverse populations. Here we conducted a multi-ancestry genome-wide association study of 156,319 prostate cancer cases and 788,443 controls of European, African, Asian and Hispanic men, reflecting a 57% increase in the number of non-European cases over previous prostate cancer genome-wide association studies. We identified 187 novel risk variants for prostate cancer, increasing the total number of risk variants to 451. An externally replicated multi-ancestry GRS was associated with risk that ranged from 1.8 (per standard deviation) in African ancestry men to 2.2 in European ancestry men. The GRS was associated with a greater risk of aggressive versus non-aggressive disease in men of African ancestry (P = 0.03). Our study presents novel prostate cancer susceptibility loci and a GRS with effective risk stratification across ancestry groups.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Conti, David, V, et al.
(författare)
-
Trans-ancestry genome-wide association meta-analysis of prostate cancer identifies new susceptibility loci and informs genetic risk prediction
- 2021
-
Ingår i: Nature Genetics. - : Springer Nature. - 1061-4036 .- 1546-1718. ; 53:1, s. 65-75
-
Tidskriftsartikel (refereegranskat)abstract
- Prostate cancer is a highly heritable disease with large disparities in incidence rates across ancestry populations. We conducted a multiancestry meta-analysis of prostate cancer genome-wide association studies (107,247 cases and 127,006 controls) and identified 86 new genetic risk variants independently associated with prostate cancer risk, bringing the total to 269 known risk variants. The top genetic risk score (GRS) decile was associated with odds ratios that ranged from 5.06 (95% confidence interval (CI), 4.84-5.29) for men of European ancestry to 3.74 (95% CI, 3.36-4.17) for men of African ancestry. Men of African ancestry were estimated to have a mean GRS that was 2.18-times higher (95% CI, 2.14-2.22), and men of East Asian ancestry 0.73-times lower (95% CI, 0.71-0.76), than men of European ancestry. These findings support the role of germline variation contributing to population differences in prostate cancer risk, with the GRS offering an approach for personalized risk prediction. A meta-analysis of genome-wide association studies across different populations highlights new risk loci and provides a genetic risk score that can stratify prostate cancer risk across ancestries.
|
|
| 8. |
|
|
| 9. |
- Appeltans, W., et al.
(författare)
-
The Magnitude of Global Marine Species Diversity
- 2012
-
Ingår i: Current Biology. - : Elsevier BV. - 0960-9822 .- 1879-0445. ; 22:23, s. 2189-2202
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The question of how many marine species exist is important because it provides a metric for how much we do and do not know about life in the oceans. We have compiled the first register of the marine species of the world and used this baseline to estimate how many more species, partitioned among all major eukaryotic groups, may be discovered. Results: There are similar to 226,000 eukaryotic marine species described. More species were described in the past decade (similar to 20,000) than in any previous one. The number of authors describing new species has been increasing at a faster rate than the number of new species described in the past six decades. We report that there are similar to 170,000 synonyms, that 58,000-72,000 species are collected but not yet described, and that 482,000-741,000 more species have yet to be sampled. Molecular methods may add tens of thousands of cryptic species. Thus, there may be 0.7-1.0 million marine species. Past rates of description of new species indicate there may be 0.5 +/- 0.2 million marine species. On average 37% (median 31%) of species in over 100 recent field studies around the world might be new to science. Conclusions: Currently, between one-third and two-thirds of marine species may be undescribed, and previous estimates of there being well over one million marine species appear highly unlikely. More species than ever before are being described annually by an increasing number of authors. If the current trend continues, most species will be discovered this century.
|
|
| 10. |
- Bruggmann, P., et al.
(författare)
-
Historical epidemiology of hepatitis C virus (HCV) in selected countries
- 2014
-
Ingår i: Journal of Viral Hepatitis. - Hoboken : Wiley-Blackwell. - 1352-0504 .- 1365-2893. ; 21, s. 5-33
-
Tidskriftsartikel (refereegranskat)abstract
- Chronic infection with hepatitis C virus (HCV) is a leading indicator for liver disease. New treatment options are becoming available, and there is a need to characterize the epidemiology and disease burden of HCV. Data for prevalence, viremia, genotype, diagnosis and treatment were obtained through literature searches and expert consensus for 16 countries. For some countries, data from centralized registries were used to estimate diagnosis and treatment rates. Data for the number of liver transplants and the proportion attributable to HCV were obtained from centralized databases. Viremic prevalence estimates varied widely between countries, ranging from 0.3% in Austria, England and Germany to 8.5% in Egypt. The largest viremic populations were in Egypt, with 6358000 cases in 2008 and Brazil with 2106000 cases in 2007. The age distribution of cases differed between countries. In most countries, prevalence rates were higher among males, reflecting higher rates of injection drug use. Diagnosis, treatment and transplant levels also differed considerably between countries. Reliable estimates characterizing HCV-infected populations are critical for addressing HCV-related morbidity and mortality. There is a need to quantify the burden of chronic HCV infection at the national level.
|
|
| 11. |
- Razavi, H., et al.
(författare)
-
The present and future disease burden of hepatitis C virus (HCV) infection with today's treatment paradigm
- 2014
-
Ingår i: Journal of Viral Hepatitis. - Hoboken : Wiley-Blackwell. - 1352-0504 .- 1365-2893. ; 21:Suppl. 1, s. 34-59
-
Tidskriftsartikel (refereegranskat)abstract
- The disease burden of hepatitis C virus (HCV) is expected to increase as the infected population ages. A modelling approach was used to estimate the total number of viremic infections, diagnosed, treated and new infections in 2013. In addition, the model was used to estimate the change in the total number of HCV infections, the disease progression and mortality in 2013-2030. Finally, expert panel consensus was used to capture current treatment practices in each country. Using today's treatment paradigm, the total number of HCV infections is projected to decline or remain flat in all countries studied. However, in the same time period, the number of individuals with late-stage liver disease is projected to increase. This study concluded that the current treatment rate and efficacy are not sufficient to manage the disease burden of HCV. Thus, alternative strategies are required to keep the number of HCV individuals with advanced liver disease and liver-related deaths from increasing.
|
|
| 12. |
- Wedemeyer, H., et al.
(författare)
-
Strategies to manage hepatitis C virus (HCV) disease burden
- 2014
-
Ingår i: Journal of Viral Hepatitis. - Hoboken : Wiley-Blackwell. - 1352-0504 .- 1365-2893. ; 21, s. 60-89
-
Tidskriftsartikel (refereegranskat)abstract
- The number of hepatitis C virus (HCV) infections is projected to decline while those with advanced liver disease will increase. A modeling approach was used to forecast two treatment scenarios: (i) the impact of increased treatment efficacy while keeping the number of treated patients constant and (ii) increasing efficacy and treatment rate. This analysis suggests that successful diagnosis and treatment of a small proportion of patients can contribute significantly to the reduction of disease burden in the countries studied. The largest reduction in HCV-related morbidity and mortality occurs when increased treatment is combined with higher efficacy therapies, generally in combination with increased diagnosis. With a treatment rate of approximately 10%, this analysis suggests it is possible to achieve elimination of HCV (defined as a >90% decline in total infections by 2030). However, for most countries presented, this will require a 3-5 fold increase in diagnosis and/or treatment. Thus, building the public health and clinical provider capacity for improved diagnosis and treatment will be critical.
|
|
| 13. |
- Razavi-Shearer, Devin M., et al.
(författare)
-
Adjusted estimate of the prevalence of hepatitis delta virus in 25 countries and territories
- 2024
-
Ingår i: JOURNAL OF HEPATOLOGY. - 0168-8278 .- 1600-0641. ; 80:2, s. 232-242
-
Tidskriftsartikel (refereegranskat)abstract
- Background & Aims: Hepatitis delta virus (HDV) is a satellite RNA virus that requires the hepatitis B virus (HBV) for assembly and propagation. Individuals infected with HDV progress to advanced liver disease faster than HBV-monoinfected individuals. Recent studies have estimated the global prevalence of anti-HDV antibodies among the HBV-infected population to be 5-15%. This study aimed to better understand HDV prevalence at the population level in 25 countries/territories. Methods: We conducted a literature review to determine the prevalence of anti-HDV and HDV RNA in hepatitis B surface antigen (HBsAg)-positive individuals in 25 countries/territories. Virtual meetings were held with experts from each setting to discuss the findings and collect unpublished data. Data were weighted for patient segments and regional heterogeneity to estimate the prevalence in the HBV-infected population. The findings were then combined with The Polaris Observatory HBV data to estimate the anti-HDV and HDV RNA prevalence in each country/territory at the population level. Results: After adjusting for geographical distribution, disease stage and special populations, the anti-HDV prevalence among the HBsAg+ population changed from the literature estimate in 19 countries. The highest anti-HDV prevalence was 60.1% in Mongolia. Once adjusted for the size of the HBsAg+ population and HDV RNA positivity rate, China had the highest absolute number of HDV RNA+ cases. Conclusions: We found substantially lower HDV prevalence than previously reported, as prior meta-analyses primarily focused on studies conducted in groups/regions that have a higher probability of HBV infection: tertiary care centers, specific risk groups or geographical regions. There is large uncertainty in HDV prevalence estimates. The implementation of reflex testing would improve estimates, while also allowing earlier linkage to care for HDV RNA+ individuals. The logistical and economic burden of reflex testing on the health system would be limited, as only HBsAg+ cases would be screened.
|
|
| 14. |
- Razavi, Homie A., et al.
(författare)
-
Hepatitis D double reflex testing of all hepatitis B carriers in low-HBV- and high-HBV/HDV-prevalence countries
- 2023
-
Ingår i: JOURNAL OF HEPATOLOGY. - : Elsevier. - 0168-8278 .- 1600-0641. ; 79:2, s. 576-580
-
Tidskriftsartikel (refereegranskat)abstract
- Hepatitis D virus (HDV) infection occurs as a coinfection with hepatitis B and increases the risk of hepatocellular carcinoma, decompensated cirrhosis, and mortality compared to hepatitis B virus (HBV) monoinfection. Reliable estimates of the prevalence of HDV infection and disease burden are essential to formulate strategies to find coinfected individuals more effectively and efficiently. The global prevalence of HBV infections was estimated to be 262,240,000 in 2021. Only 1,994,000 of the HBV in-fections were newly diagnosed in 2021, with more than half of the new diagnoses made in China. Our initial estimates indicated a much lower prevalence of HDV antibody (anti-HDV) and HDV RNA positivity than previously reported in published studies. Ac-curate estimates of HDV prevalence are needed. The most effective method to generate estimates of the prevalence of anti-HDV and HDV RNA positivity and to find undiagnosed individuals at the national level is to implement double reflex testing. This re-quires anti-HDV testing of all hepatitis B surface antigen-positive individuals and HDV RNA testing of all anti-HDV-positive in-dividuals. This strategy is manageable for healthcare systems since the number of newly diagnosed HBV cases is low. At the global level, a comprehensive HDV screening strategy would require only 1,994,000 HDV antibody tests and less than 89,000 HDV PCR tests. Double reflex testing is the preferred strategy in countries with a low prevalence of HBV and those with a high prevalence of both HBV and HDV. For example, in the European Union and North America only 35,000 and 22,000 cases, respectively, will require anti-HDV testing annually.
|
|
| 15. |
- Brandão, Andreia, et al.
(författare)
-
The CHEK2 Variant C.349A>G Is Associated with Prostate Cancer Risk and Carriers Share a Common Ancestor
- 2020
-
Ingår i: Cancers. - : MDPI AG. - 2072-6694. ; 12:11
-
Tidskriftsartikel (refereegranskat)abstract
- The identification of recurrent founder variants in cancer predisposing genes may have important implications for implementing cost-effective targeted genetic screening strategies. In this study, we evaluated the prevalence and relative risk of the CHEK2 recurrent variant c.349A>G in a series of 462 Portuguese patients with early-onset and/or familial/hereditary prostate cancer (PrCa), as well as in the large multicentre PRACTICAL case-control study comprising 55,162 prostate cancer cases and 36,147 controls. Additionally, we investigated the potential shared ancestry of the carriers by performing identity-by-descent, haplotype and age estimation analyses using high-density SNP data from 70 variant carriers belonging to 11 different populations included in the PRACTICAL consortium. The CHEK2 missense variant c.349A>G was found significantly associated with an increased risk for PrCa (OR 1.9; 95% CI: 1.1-3.2). A shared haplotype flanking the variant in all carriers was identified, strongly suggesting a common founder of European origin. Additionally, using two independent statistical algorithms, implemented by DMLE+2.3 and ESTIAGE, we were able to estimate the age of the variant between 2300 and 3125 years. By extending the haplotype analysis to 14 additional carrier families, a shared core haplotype was revealed among all carriers matching the conserved region previously identified in the high-density SNP analysis. These findings are consistent with CHEK2 c.349A>G being a founder variant associated with increased PrCa risk, suggesting its potential usefulness for cost-effective targeted genetic screening in PrCa families.
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
- Lange, Jonathan, et al.
(författare)
-
Novel lithographic printing techniques enabling sustainable and high quality multi material manufacturing process for future space outposts
- 2021
-
Ingår i: IAC 2021 Congress Proceedings, 72nd International Astronautical Congress (IAC), Dubai, United Arab Emirates. - : International Astronautical Federation (IAF).
-
Konferensbidrag (refereegranskat)abstract
- Several challenges remain before the full potential of on-orbit manufacturing can be realized. There may be some limitations to the types of items that can be manufactured in space. Such limitations could be caused by a variety of factors, including the materials required for a particular structure, the size of the object to be manufactured, the time required to execute the architecture, the configuration of the object being manufactured, and the raw material needed to support the manufacturing process. The complementary challenge to the relevant fabrication processes is the possibility to achieve the required precision demanded by geometrically complex structures and the ability to be versatile in processing a broad material spectrum. In this context, novel lithographic 3D printing techniques will be an asset to pave the way towards overcoming these challenges. Currently, the European Space Agency (ESA) is investigating the implementation of such technology in the context of a lunar base. In particular, two different applications are being studied: • Lithography-Based Ceramic Manufacturing (LCM), where the ceramic powder is distributed in a photocurable monomer formulation in presence of a photoinitiator. Ceramic materials are extensively used in a vast number of technological processes as well as in space applications. They are usually considered as the material of choice for applications where other materials such as plastic and metal fail to deliver the required performance. The LCM process will also allow processing lunar regolith simulant adding value to the current material portfolio of this technique, as well as to the range of processes potentially applicable on the lunar or Martian surface. • Lithography-based Metal Manufacturing (LMM) for processing metallic powders. In contrast to the currently predominantly used powder bed fusion (direct metal laser melting) techniques, this process uses a paste/suspension as feedstock and hence, does not rely on the use of highly spherical gas atomized powders. This will enable the utilization of recycled powders from scrap metals that are available at Moon bases or of metallic alloys reduced from lunar regolith, thus providing higher flexibility in accepting raw material with poor quality and purity. The paper addresses the results from both activities in terms of printed parts quality (roughness, density, resolution and accuracy) as well as the implementation requirements for the whole process chain, including suitable pre- and post-processing steps, with the aim to achieve a zero-waste flow in a lunar environment.
|
|
| 19. |
- Brandao, A, et al.
(författare)
-
The CHEK2 Variant C.349A>G Is Associated with Prostate Cancer Risk and Carriers Share a Common Ancestor
- 2020
-
Ingår i: Cancers. - : MDPI AG. - 2072-6694. ; 12:11
-
Tidskriftsartikel (refereegranskat)abstract
- The identification of recurrent founder variants in cancer predisposing genes may have important implications for implementing cost-effective targeted genetic screening strategies. In this study, we evaluated the prevalence and relative risk of the CHEK2 recurrent variant c.349A>G in a series of 462 Portuguese patients with early-onset and/or familial/hereditary prostate cancer (PrCa), as well as in the large multicentre PRACTICAL case–control study comprising 55,162 prostate cancer cases and 36,147 controls. Additionally, we investigated the potential shared ancestry of the carriers by performing identity-by-descent, haplotype and age estimation analyses using high-density SNP data from 70 variant carriers belonging to 11 different populations included in the PRACTICAL consortium. The CHEK2 missense variant c.349A>G was found significantly associated with an increased risk for PrCa (OR 1.9; 95% CI: 1.1–3.2). A shared haplotype flanking the variant in all carriers was identified, strongly suggesting a common founder of European origin. Additionally, using two independent statistical algorithms, implemented by DMLE+2.3 and ESTIAGE, we were able to estimate the age of the variant between 2300 and 3125 years. By extending the haplotype analysis to 14 additional carrier families, a shared core haplotype was revealed among all carriers matching the conserved region previously identified in the high-density SNP analysis. These findings are consistent with CHEK2 c.349A>G being a founder variant associated with increased PrCa risk, suggesting its potential usefulness for cost-effective targeted genetic screening in PrCa families.
|
|
| 20. |
- Leonardo, Diego A., et al.
(författare)
-
Orientational Ambiguity in Septin Coiled Coils and its Structural Basis
- 2021
-
Ingår i: Journal of Molecular Biology. - : Elsevier BV. - 0022-2836. ; 433:9
-
Tidskriftsartikel (refereegranskat)abstract
- Septins are an example of subtle molecular recognition whereby different paralogues must correctly assemble into functional filaments important for essential cellular events such as cytokinesis. Most possess C-terminal domains capable of forming coiled coils which are believed to be involved in filament formation and bundling. Here, we report an integrated structural approach which aims to unravel their architectural diversity and in so doing provide direct structural information for the coiled-coil regions of five human septins. Unexpectedly, we encounter dimeric structures presenting both parallel and antiparallel arrangements which are in consonance with molecular modelling suggesting that both are energetically accessible. These sequences therefore code for two metastable states of different orientations which employ different but overlapping interfaces. The antiparallel structures present a mixed coiled-coil interface, one side of which is dominated by a continuous chain of core hydrophilic residues. This unusual type of coiled coil could be used to expand the toolkit currently available to the protein engineer for the design of previously unforeseen coiled-coil based assemblies. Within a physiological context, our data provide the first atomic details related to the assumption that the parallel orientation is likely formed between septin monomers from the same filament whilst antiparallelism may participate in the widely described interfilament cross bridges necessary for higher order structures and thereby septin function.
|
|
| 21. |
- Riede, M., et al.
(författare)
-
Material characterization of AISI 316L flexure pivot bearings fabricated by additive manufacturing
- 2019
-
Ingår i: Materials. - : MDPI. - 1996-1944. ; 12:15
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, additive manufacturing (AM) by laser metal deposition (LMD) has become a key technology for fabricating highly complex parts without any support structures. Compared to the well-known powder bed fusion process, LMD enhances manufacturing possibilities to overcome AM-specific challenges such as process inherent porosity, minor build rates, and limited part size. Moreover, the advantages aforementioned combined with conventional machining enable novel manufacturing approaches in various fields of applications. Within this contribution, the additive manufacturing of filigree flexure pivots using 316L-Si by means of LMD with powder is presented. Frictionless flexure pivot bearings are used in space mechanisms that require high reliability, accuracy, and technical cleanliness. As a contribution to part qualification, the manufacturing process, powder material, and fabricated specimens were investigated in a comprehensive manner. Due to its major impact on the process, the chemical powder composition was characterized in detail by energy dispersive X-ray spectroscopy (EDX) and inductively coupled plasma optical emission spectrometry (ICP-OES). Moreover, a profound characterization of the powder morphology and flowability was carried out using scanning electron microscopy (SEM) and novel rheological investigation techniques. Furthermore, quantitative image analysis, mechanical testing, laser scanning microscopy, and 3D shape measurement of manufactured specimens were conducted. As a result, the gained knowledge was applied for the AM-specific redesign of the flexure pivot. Finally, a qualified flexure pivot has been manufactured in a hybrid manner to subsequently ensure its long-term durability in a lifetime test bench.
|
|
| 22. |
|
|
| 23. |
- Palmieri, M., et al.
(författare)
-
Frequency and Evolution of Acute Oral Complications in Patients Undergoing Radiochemotherapy Treatment for Head and Neck Squamous Cell Carcinoma
- 2021
-
Ingår i: Ear, Nose and Throat Journal. - : SAGE Publications. - 0145-5613 .- 1942-7522. ; 100:5 suppl.
-
Tidskriftsartikel (refereegranskat)abstract
- Despite its effectiveness, radiochemotherapy treatment in the head and neck region is accompanied by acute oral complications such as oral mucositis, dysphagia, xerostomia, and dysgeusia. The aim of this study was to analyze and prospectively assess the frequency and evolution of acute oral complications during radiochemotherapy in patients diagnosed with squamous cell carcinoma in the head and neck region. We have analyzed oral complications of 20 patients during 6 weeks of radiochemotherapy treatment for squamous cell carcinoma. Oral mucositis was evaluated according to the World Health Organization criteria, dysphagia, and dysgeusia according to the National Cancer Institute Common Toxicity Criteria, and xerostomia according to parameters set by the Seminars in Radiation Oncology. Mucositis was first observed in the second week and all patients presented some degree of mucositis in the fourth week of radiotherapy. Xerostomia and dysphagia were initially reported already in the first week of radiotherapy. All patients presented xerostomia in the fourth week; however, dysphagia was observed in all patients, only in the sixth week. Dysgeusia was first observed in the second week, becoming more severe in the third week. Acute oral complications can be observed throughout the treatment, but the third week of radiotherapy seems to represent a critical week, regardless of the grade of the complication. The sixth week presents the worst grades of these complications. Knowledge about the natural course of oral complications during radiotherapy is important to develop better strategies for treatment and improve the patients’ quality of life. © The Author(s) 2019.
|
|
| 24. |
|
|
| 25. |
|
|
