| 1. |
|
|
| 2. |
|
|
| 3. |
- Hedelind, Mikael, et al.
(författare)
-
Factory-in-a-Box - Solutions for Availability and Mobility of Flexible Production Capacity
- 2007
-
Ingår i: The Swedish Production Symposium,2007.
-
Konferensbidrag (refereegranskat)abstract
- The objective of this paper is to present examples of how to realize a flexible and reconfigurable production system. An ongoing research project in Sweden called Factory-in-a-Box will be presented which is one research initiative within this area. The purpose of the Factory-in-a-Box project is to develop solutions for mobile production capacity on demand. Three key features have been identified as enablers for these kinds of production capabilities: mobility, flexibility, and speed. The concept consists of standardized modules that can be installed in e.g. containers and easily transported by trucks, rail vehicles, and boats. The modules can easily be combined into complete production systems and reconfigured for new products and/or scaled to handle new volumes. The goal of the Factory-in-a-Box project is to build fully operative production modules that are developed in close cooperation between different academic and industrial partners. This paper will present the results from these demonstrators giving examples of the usability of the Factory-in-a-Box concept in industry.
|
|
| 4. |
- Laarz, Eric, et al.
(författare)
-
Colloidal processing of Al2O3-based composites reinforced with TiN and TiC particulates, whiskers and nanoparticles
- 2001
-
Ingår i: Journal of the European Ceramic Society. - 0955-2219 .- 1873-619X. ; 21:8, s. 1027-1035
-
Tidskriftsartikel (refereegranskat)abstract
- A colloidal processing route has been developed for the preparation of dense and homogeneous Al2O3–TiN/TiC composites. The dispersion and rheological properties of mixtures of TiN or TiC particulates and Al2O3 particles were investigated using electrokinetics and steady-shear rheology. We found that well-dispersed aqueous suspensions with low viscosity could be prepared by adding a poly(acrylic acid) dispersant and controlling pH in the alkaline range. This processing scheme was also suitable for preparation of whisker and nanoparticle composite suspensions. The alumina-based composite suspensions with a secondary-phase concentration of 25 vol.% were freeze-granulated and hot-pressed, and the resulting bodies were fully densified with well-dispersed secondary phases. Homogeneous Al2O3–TiN nanoparticle composites could only be prepared with additions of up to 5 vol.% nanoparticles; higher additions resulted in agglomeration and subsequent grain growth of the nanoparticles.
|
|
| 5. |
- Ainegren, Mats, 1963-, et al.
(författare)
-
A portable roller ski rolling resistance measurement system
- 2013
-
Ingår i: The Impact of Technology on Sport V. - : Elsevier. ; , s. 79-83
-
Konferensbidrag (refereegranskat)abstract
- Roller skis are used by cross-country skiers, biathletes and ski-orienteers for their snow-free training and in roller ski competitions. Additionally, much of the current sports research into the physiology and biomechanics of crosscountry skiing is conducted indoors on treadmills using roller skis. For elite athletes, the differences in performance are quite small, thus emphasising the importance of knowing the roller skis' rolling resistance coefficient, especially in connection to research and roller ski competitions. The purpose of this study was to develop a roller ski rolling resistance measurement system (P-RRMS) that is portable and therefore useful in different contexts and locations. The P-RRMS was designed as a small treadmill, equipped with roller ski stabilizing lateral supports and a screwed bar for applying different vertical loads on the roller ski. The design uses only one force sensor, with possible measurements of three directions of force and torque around three axes. The weight of the P-RRMS is 100 kg and it is equipped with wheels to facilitate transportation.
|
|
| 6. |
- Ainegren, Mats, et al.
(författare)
-
An experimental study to compare the grip of classical style roller skis with on-snow skiing
- 2013
-
Ingår i: Sports Engineering. - : Springer Science and Business Media LLC. - 1369-7072 .- 1460-2687. ; 16:2, s. 115-122
-
Tidskriftsartikel (refereegranskat)abstract
- Cross-country skiers use roller skis for their snow-free training with the aim of imitating skiing on snow. Also, exercise laboratories evaluate the biomechanics and physiology of cross-country skiing using roller skis on a treadmill. The roller skis on the market that are constructed for use in the classical style are equipped with a front and a back wheel, one of which has a ratchet to enable it to grip the surface when diagonal striding and kick double poling (static friction). The aim of this study was to investigate static friction coefficients (μS) of ratcheted wheel roller skis, and compare the results to the μS reported from skiing on snow with grip-waxed cross-country skis. Also, a new type of roller ski with a camber and adjustable grip function was evaluated. The results showed that ratcheted wheel roller skis, on a treadmill rubber mat and on dry and wet asphalt surfaces, reached μS values that were five to eight times greater than the values reported from on-snow skiing with grip-waxed cross-country skis. For the roller skis with a camber and adjustable grip function, the μs could be varied from no grip at all up to the level of the tested ratcheted wheel roller skis.
|
|
| 7. |
- Ainegren, Mats, et al.
(författare)
-
Classical style constructed roller skis and grip functionality
- 2011
-
Ingår i: Procedia Engineering. - : Elsevier. ; , s. 4-9
-
Konferensbidrag (refereegranskat)abstract
- Roller skis are used by cross-country skiers for snow-free training, with the aim of imitating skiing on snow. The roller skis on the market that are constructed for use in the classical style are equipped with a front and a back wheel, one of which has a ratchet to enable it to grip the surface when diagonal striding and kick double poling.A new type of roller ski was constructed with a function which makes it necessary to use the same kick technique as that used on snow, i.e. the ski has a camber that must be pushed down to obtain grip. Its stiffness can be adjusted based on factors that influence grip, i.e. the skier’s bodyweight and technical skiing skills.Thus, our aim was to make comparative measurements as regards grip between ratcheted roller skis and the roller ski with a camber and compare with previous published results for grip waxed skis during cross-country skiing on snow. The measurements were carried out using specially developed equipment, with a bottom plate and an overlying rubber mat of the same type as used on many treadmills and a function for applying different loads and generating traction on the back of the roller ski.
|
|
| 8. |
- Ainegren, Mats, 1963-, et al.
(författare)
-
Roller ski rolling resistance and its effects on elite athletes’ performance
- 2009
-
Ingår i: Sports Engineering. - Paris : Springer. - 1369-7072 .- 1460-2687. - 9782287990564 - 9782287990557 ; 11:3, s. 143-157
-
Tidskriftsartikel (refereegranskat)abstract
- Modern ski-treadmills allow cross-country skiers, biathletes and ski-orienteers to test their physical fitness in a laboratory environment whilst performing classical and freestyle (skating) techniques on roller skis. For elite athletes, the differences in performance between test occasions are quite small, thus emphasising the importance of knowing the roller skis’ rolling resistance in order to allow the correct comparison between the results of different test occasions. In this study, the roller skis’ rolling resistance was measured on the ski-treadmill’s surface using a roller ski rolling resistance measurement system specially produced for this purpose. The study investigated the influence of significant changes in rolling resistance on physiological variables. The results showed that during submaximal exercise, power, oxygen uptake, heart rate and blood lactate were significantly changed by different rolling resistances, while there were no significant or only small changes to cycle rate, cycle length and ratings of perceived exertion. Incremental maximal tests showed that time to exhaustion was significantly changed by different rolling resistances and this occurred without significant changes in maximal power, maximal oxygen uptake, maximal heart rate and blood lactate, and that the influence on ratings of perceived exertion were insignificant or small.
|
|
| 9. |
- Ainegren, Mats, 1963-, et al.
(författare)
-
Roller ski rolling resistance and its effects on elite athletes’ performance
- 2008
-
Ingår i: ENGINEERING OF SPORT 7, VOL 2. - 9782287094125 ; , s. 393-400
-
Konferensbidrag (refereegranskat)abstract
- Modern ski-treadmills allow cross-country skiers, biathletes and ski-orienteers to test their physical fitness in a laboratory environment whilst performing classical and freestyle (skating) techniques on roller skis. For elite athletes the differences in performance between test occasions are quite small, thus emphasising the importance of knowing the roller skis’ rolling resistance in order to allow the correct comparison between the results of different test occasions. In this study the roller skis’ rolling resistance has been measured using equipment on the ski-treadmill. The study investigates the influence of significant changes in rolling resistance on physiological variables. The results show that during submaximal exercise, heart rate, blood lactate, power and oxygen uptake are significantly changed by different rolling resistances, while there are no significant or only small changes to cycle rate, cycle length and ratings of perceived exertion. Incremental maximal tests show that time to exhaustion is significantly changed by different rolling resistances and this occurred without significant changes in maximal oxygen uptake and heart rate, and the influence on maximal power and ratings of perceived exertion were insignificant or small.
|
|
| 10. |
- Ainegren, Mats, 1963-, et al.
(författare)
-
Rolling resistance for treadmill roller skiing
- 2008
-
Ingår i: Sports Engineering. - : Springer. - 1369-7072 .- 1460-2687. ; 11:1, s. 23-29
-
Tidskriftsartikel (refereegranskat)abstract
- Modern treadmills allow cross-country skiers, biathletes and ski-orienteers to test their physical performance under laboratory conditions using classical and freestyle techniques on roller skis. The differences in performance between tests are quite small for elite athletes, and it is therefore of great importance to control the rolling resistance of the roller skis. Otherwise different physiological tests cannot be accurately compared.This study shows that during a warm-up period of 30 minutes the coefficient of rolling resistance (µR) decreases to about 60-65% and 70-75% of its initial value for freestyle and classical roller skis respectively.Simultaneous measurements of temperature and µR shows that stabilized rolling resistance corresponds to a certain running temperature for a given normal force on the roller ski.Tests were also performed on the influence on µR of normal force, velocity and inclination. Normal forces produced significant influence on µR , while different velocities and inclinations of the treadmill only resulted in small changes in µR.
|
|
| 11. |
|
|
| 12. |
- Ainegren, Mats, et al.
(författare)
-
Skiing economy and efficiency in recreational and elite cross-country skiers
- 2013
-
Ingår i: Journal of Strength and Conditioning Research. - 1064-8011 .- 1533-4287. ; 27:5, s. 1239-1252
-
Tidskriftsartikel (refereegranskat)abstract
- The purpose of this study was to investigate and compare skiing economy and gross efficiency in cross-country skiers of different performance levels, ages and genders; male recreational skiers and elite senior and junior cross-country skiers of both genders. The skiers performed tests involving roller skiing on a treadmill using the gear 3 and diagonal stride techniques. The elite crosscountry skiers were found to have better skiing economy and higher gross efficiency (5-18%) compared with the recreational skiers (p < 0.05) and the senior elite had better economy and higher efficiency (4-5%) than their junior counterparts (p < 0.05), whereas no differences could be found between the genders. Also, large ranges in economy and gross efficiency were found in all groups. It was concluded that, in addition to v̇O2peak, skiing economy and gross efficiency have a great influence on the differences in performance times between recreational and junior and senior elite cross-country skiers, as well as between individual skiers within the different categories. Thus, we recommend crosscountry skiers at all performance levels to test not only v̇O2peak, but also skiing economy and efficiency.
|
|
| 13. |
- Ainegren, Mats, et al.
(författare)
-
The influence of grip on oxygen consumption and leg forces when using classical style roller skis
- 2014
-
Ingår i: Scandinavian Journal of Medicine and Science in Sports. - : John Wiley & Sons. - 0905-7188 .- 1600-0838. ; 24:2, s. 301-310
-
Tidskriftsartikel (refereegranskat)abstract
- The purpose of this study was to investigate the influence of classical style roller skis' grip (static friction coefficients, μ S) on cross-country skiers' oxygen consumption and leg forces during treadmill roller skiing, when using the diagonal stride and kick double poling techniques. The study used ratcheted wheel roller skis from the open market and a uniquely designed roller ski with an adjustable camber and grip function. The results showed significantly (P≤0.05) higher oxygen consumption (∼14%), heart rate (∼7%), and lower propulsive forces from the legs during submaximal exercise and a shorter time to exhaustion (∼30%) in incremental maximal tests when using roller skis with a μ S similar to on-snow skiing, while there was no difference between tests when using different pairs of roller skis with a similar, higher μ S. Thus, we concluded that oxygen consumption (skiing economy), propulsive leg forces, and performance time are highly changed for the worse when using roller skis with a lower μ S, such as for on-snow skiing with grip-waxed cross-country skis, in comparison to ratcheted wheel roller skis with several times higher μ S.
|
|
| 14. |
|
|
| 15. |
- Ainegren, Mats, 1963-, et al.
(författare)
-
The multifunctional roller ski
- 2013
-
Ingår i: Science and Nordic Skiing II. - : University of Salzburg, University of Jyväskylä. - 9789513951757 ; , s. 253-261
-
Bokkapitel (refereegranskat)
|
|
| 16. |
- Ainegren, Mats, 1963-, et al.
(författare)
-
Work economy of amateur and elite cross-country skiers during treadmill roller skiing
- 2009
-
Ingår i: 4th Asia Pacific Congress on Sports Technology, APCST2009. - 9781921426384
-
Konferensbidrag (refereegranskat)abstract
- This study focused on the work economy of cross-country skiers during treadmill roller skiing in the perspectives; skill, age and gender. The study was investigating the external power output from elevating the transported mass against gravity and overcoming the roller skis rolling resistance, and the internal power from measured oxygen uptake and energy consumption. The roller skis rolling resistance was measured with a fixture on the ski-treadmill and the results showed a significant correlation between normal force and rolling resistance. The results also showed that it was only the amateur skiers who significantly differed in work economy among the five studied groups.
|
|
| 17. |
|
|
| 18. |
- Akselsson, Roland, et al.
(författare)
-
Luftföroreningar vid svetsning
- 1977
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- PIXE-analyser kan utföras med utvecklad analysuppställning med noggrannhet och precision av c:a 10 % och med hög analyskapacitet. Ett dataprogram för evaluering av räntgenspektra presenteras. Inverkan av provtjocklek vid PIXE-analys av inhomogena prov har studerats och korrektioner föreslås. Fluorinnehållet i filterprov har bestämts, samtidigt med PIXE-analys, genom utnyttjande av en kärnfysikalisk reaktion som ger resultat med god noggrannhet och precision. Svetsaerosoler har karakteriserats m.h.a. PIXE, ESCA och TEM/EDAX. En uppställning för insamling av svetsaerosoler under utveckling och hittillsvarande resultat indikerar representativ provinsamling med god reproducerbarhet.
|
|
| 19. |
|
|
| 20. |
- Benson, Mikael, 1954, et al.
(författare)
-
DNA microarray analysis of chromosomal susceptibility regions to identify candidate genes for allergic disease: A pilot study
- 2004
-
Ingår i: Acta Oto-Laryngologica. - : Informa UK Limited. - 1651-2251 .- 0001-6489. ; 124:7, s. 813-819
-
Tidskriftsartikel (refereegranskat)abstract
- Objective-To examine whether DNA microarray analysis of chromosomal susceptibility regions for allergy can help to identify candidate genes. Material and Methods-Nasal biopsies were obtained from 23 patients with allergic rhinitis and 12 healthy controls. RNA was extracted from the biopsies and pooled into three patient and three control pools. These were then analysed in duplicate with DNA microarrays containing 12626 genes. Candidate genes were further examined in nasal biopsies (real-time polymerase chain reaction) and blood samples (single nucleotide polymorphisms) from other patients with allergic rhinitis and from controls. Results-A total of 37 differentially expressed genes were identified according to criteria involving both the size and consistency of the gene expression levels. The chromosomal location of these genes was compared with the chromosomal susceptibility regions for allergic disease. Using a statistical method, five genes were identified in these regions, including serine protease inhibitor, Kazal type, 5 (SPINK5) and HLA-DRB2. The relevance of these genes was examined in other patients with allergic rhinitis and in controls; none of the genes were differentially expressed in nasal biopsies. Moreover, no association between allergic rhinitis and SPINK5 polymorphisms was found, at either the genotype or haplotype level. Conclusions-DNA microarray analysis of chromosomal susceptibility regions did not lead to identification of candidate genes that could be validated in a new material. However, because gene polymorphisms may cause differential gene expression, further studies, including validation data, are needed to examine this approach.
|
|
| 21. |
- Carlsson, Anna K, 1966, et al.
(författare)
-
Barns Skallskador vid Olyckor i Personbil
- 2016
-
Ingår i: Transportforum, January 12–13, 2016; Linköping, Sweden.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)
|
|
| 22. |
- Carlsson, Anna K, 1966, et al.
(författare)
-
Review of Child Car Occupant Fatalities in Sweden During Six Decades
- 2013
-
Ingår i: Proceedings: IRCOBI Conference; September 11-13; Gothenburg, Sweden. ; , s. 1-14
-
Konferensbidrag (refereegranskat)abstract
- The development of fatal outcome was reviewed based on crash data including all fatally injured 0–14 year old car occupants in Sweden during 1956–2011 and put in relation to general improvements in vehicle and road safety and implementation of restraint systems.The review revealed a substantial decrease in crash‐related fatalities among 0–14 year old car occupants during the past three decades, representing a significant drop of 83% compared to the highest scores in the 1960s–70s. During 1992–2011, a total of 194 crash‐related fatalities were registered; the majority occurred on high‐speed roads. Head injury was a primary cause of death, in a total of 54% of all cases. Two fifths of the crashes involved a single car, while three fifths involved other vehicles. In total, 24% of the children were unrestrained, and 59% of those were ejected during crashes. Among the restrained children, 56% were considered to be appropriately restrained according to Swedish recommendations. Crash severity, complex crash situation, fire and drowning were factors that contributed to the fatal outcome, even though the restraint usage was considered to be optimal.
|
|
| 23. |
- Carlsson, Mats, et al.
(författare)
-
Automatic frequency assignment for cellular telephones using constraint satisfaction techniques
- 1993. - 1
-
Ingår i: Proc. Tenth International Conference on Logic Programming. - : The MIT Press. ; , s. 647-665
-
Konferensbidrag (refereegranskat)abstract
- We study the problem of automatic frequency assignment for cellular telephone systems. The frequency assignment problem is viewed as the problem to minimize the unsatisfied soft constraints in a constraint satisfaction problem (CSP) over a finite domain of frequencies involving co-channel, adjacent channel, and co-site constraints. The soft constraints are automatically derived from signal strength prediction data. The CSP is solved using a generalized graph coloring algorithm. Graph-theoretical results play a crucial role in making the problem tractable. Performance results from a real-world frequency assignment problem are presented. We develop the generalized graph coloring algorithm by stepwise refinement, starting from DSATUR and augmenting it with local propagation, constraint lifting, intelligent backtracking, redundancy avoidance, and iterative deepening.
|
|
| 24. |
|
|
| 25. |
- Carlsson, Mats, 1970-
(författare)
-
Preparation and characterisation of refractory whiskers and selected alumina composites
- 2004
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- A whisker is a common name of single crystalline inorganic fibre of small dimensions, typically 0.5-1 μm in diameter and 20-50 μm in length. Whiskers are mainly used as reinforcement of ceramics. This work describes the synthesis and characterisation of new whisker types. Ti0.33Ta0.33Nb0.33CxN1-x, TiB2, B4C, and LaxCe1-xB6 have been prepared by carbothermal vapour–liquid–solid (CTR-VLS) growth mechanisms in the temperature range 900-1800°C, in argon or nitrogen. Generally, carbon and different suitable oxides were used as whisker precursors. The oxides reacted via a carbothermal reduction process. A halogenide salt was added to form gaseous metal halogenides or oxohalogenides and small amount of a transition metal was added to catalyse the whisker growth. In this mechanism, the whisker constituents are dissolved into the catalyst, in liquid phase, which becomes supersaturated. Then a whisker could nucleate and grow out under continuous feed of constituents. The syntheses of TiC, TiB2, and B4C were followed at ordinary synthesis conditions by means of mass spectrometry (MS), thermogravimetry (TG), differential thermal analysis (DTA) and quenching. The main reaction starting temperatures and reaction time for the different mixtures was revealed, and it was found that the temperature inside the crucible during the reactions was up to 100°C below the furnace set-point, due to endothermic nature of the reactions. Quench experiments showed that whiskers were formed already when reaching the temperature plateau, but the yield increased fast with the holding time and reached a maximum after about 20-30 minutes. Growth models for whisker formation have been proposed.Alumina based composites reinforced by (2-5 vol.%) TiCnano and TiNnano and 25 vol.% of carbide, and boride phases (whiskers and particulates of TiC, TiN, TaC, NbC, (Ti,Ta)C, (Ti,Ta,Nb)C, SiC, TiB2 and B4C) have been prepared by a developed aqueous colloidal processing route followed by hot pressing for 90 min at 1700°C, 28 MPa or SPS sintering for 5 minutes at 1200-1600°C and 75 MPa. Vickers indentation measurements showed that the lowest possible sintering temperature is to prefer from mechanical properties point of view. In the TiNnano composites the fracture mode was typically intergranular, while it was transgranular in the SiCnano composites. The whisker and particulate composites have been compared in terms of e.g. microstructure and mechanical properties. Generally, additions of whiskers yielded higher fracture toughness compared to particulates. Composites of commercially available SiC whiskers showed best mechanical properties with a low spread but all the other whisker phases, especially TiB2, exhibited a great potential as reinforcement materials.
|
|
