1. |
- de Graauw, Th., et al.
(författare)
-
The Herschel-Heterodyne Instrument for the Far-Infrared (HIFI)
- 2010
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 518, s. L6-
-
Tidskriftsartikel (refereegranskat)abstract
- Aims: This paper describes the Heterodyne Instrument for the Far-Infrared (HIFI) that was launched onboard ESA's Herschel Space Observatory in May 2009. Methods: The instrument is a set of 7 heterodyne receivers that are electronically tuneable, covering 480-1250 GHz with SIS mixers and the 1410-1910 GHz range with hot electron bolometer (HEB) mixers. The local oscillator (LO) subsystem comprises a Ka-band synthesizer followed by 14 chains of frequency multipliers and 2 chains for each frequency band. A pair of auto-correlators and a pair of acousto-optical spectrometers process the two IF signals from the dual-polarization, single-pixel front-ends to provide instantaneous frequency coverage of 2 × 4 GHz, with a set of resolutions (125 kHz to 1 MHz) that are better than 0.1 km s-1. Results: After a successful qualification and a pre-launch TB/TV test program, the flight instrument is now in-orbit and completed successfully the commissioning and performance verification phase. The in-orbit performance of the receivers matches the pre-launch sensitivities. We also report on the in-orbit performance of the receivers and some first results of HIFI's operations. Herschel is an ESA space observatory with science instruments provided by European-led Principal Investigator consortia and with important participation from NASA.
|
|
2. |
- Roelfsema, P. R., et al.
(författare)
-
In-orbit performance of Herschel-HIFI
- 2012
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 537
-
Tidskriftsartikel (refereegranskat)abstract
- Aims: In this paper the calibration and in-orbit performance of the Heterodyne Instrument for the Far-Infrared (HIFI) is described.Methods: The calibration of HIFI is based on a combination of ground and in-flight tests. Dedicated ground tests to determine those instrument parameters that can only be measured accurately using controlled laboratory stimuli were carried out in the instrument level test (ILT) campaign. Special in-flight tests during the commissioning phase (CoP) and performance verification (PV) allowed the determination of the remaining instrument parameters. The various instrument observing modes, as specified in astronomical observation templates (AOTs), were validated in parallel during PV by observing selected celestial sources.Results: The initial calibration and in-orbit performance of HIFI has been established. A first estimate of the calibration budget is given. The overall in-flight instrument performance agrees with the original specification. Issues remain at only a few frequencies. Herschel is an ESA space observatory with science instruments provided by European-led Principal Investigator consortia and with important participation from NASA.
|
|
3. |
- Shipman, R., et al.
(författare)
-
Data processing pipeline for Herschel HIFI
- 2017
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 608, s. A49-
-
Tidskriftsartikel (refereegranskat)abstract
- Context. The HIFI instrument on the Herschel Space Observatory performed over 9100 astronomical observations, almost 900 of which were calibration observations in the course of the nearly four-year Herschel mission. The data from each observation had to be converted from raw telemetry into calibrated products and were included in the Herschel Science Archive. Aims. The HIFI pipeline was designed to provide robust conversion from raw telemetry into calibrated data throughout all phases of the HIFI missions. Pre-launch laboratory testing was supported as were routine mission operations. Methods. A modular software design allowed components to be easily added, removed, amended and / or extended as the understanding of the HIFI data developed during and after mission operations. Results. The HIFI pipeline processed data from all HIFI observing modes within the Herschel automated processing environment as well as within an interactive environment. The same software can be used by the general astronomical community to reprocess any standard HIFI observation. The pipeline also recorded the consistency of processing results and provided automated quality reports. Many pipeline modules were in use since the HIFI pre-launch instrument level testing. Conclusions. Processing in steps facilitated data analysis to discover and address instrument artefacts and uncertainties. The availability of the same pipeline components from pre-launch throughout the mission made for well-understood, tested, and stable processing. A smooth transition from one phase to the next significantly enhanced processing reliability and robustness.
|
|
4. |
- Teyssier, D., et al.
(författare)
-
Herschel/HIFI In-flight commissioning and performance
- 2010
-
Ingår i: 21st International Symposium on Space Terahertz Technology 2010, ISSTT 2010; Oxford; United Kingdom; 23 March 2010 through 25 March 2010. - 9781617823626 ; , s. 23-28
-
Konferensbidrag (refereegranskat)abstract
- The Herschel Space Observatory was successfully launched on the 14th of May, 2009, lifting into space the Heterodyne Instrument for the Far-Infrared (HIFI). After the standard early orbit operations on the Space-craft, the instrument was switched on for the first time on the 24th of May, kicking off an instrument Commissioning period of more than a month and a half. We present here the outcome of this Commissioning campaign, including the measured in-flight performance of the instrument. Among the challenges encountered during this period was the need to optimize the stability of the signal provided by the Local Oscillator (LO) chains in some of the frequency bands, in particular that covering the singly Ionized Carbon (C+) line at the upper edge of the HIFI range, and one of the backbones of the science program of the instrument. The same concept also allowed significant improvements in the upper end of the 3b LO chain. Another noticeable achievement was the very good co-alignment measured between the mixer beams in the respective H and V polarizations offered by HIFI, allowing for more than a simple build-in redundancy, as the observing efficiency will really benefits from the combination of the two mixers.
|
|