1. |
- Kanai, M, et al.
(författare)
-
- 2023
-
swepub:Mat__t
|
|
2. |
- Krasilnikov, A., et al.
(författare)
-
Evidence of 9 Be + p nuclear reactions during 2ω CH and hydrogen minority ICRH in JET-ILW hydrogen and deuterium plasmas
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:2
-
Tidskriftsartikel (refereegranskat)abstract
- The intensity of 9Be + p nuclear fusion reactions was experimentally studied during second harmonic (2ω CH) ion-cyclotron resonance heating (ICRH) and further analyzed during fundamental hydrogen minority ICRH of JET-ILW hydrogen and deuterium plasmas. In relatively low-density plasmas with a high ICRH power, a population of fast H+ ions was created and measured by neutral particle analyzers. Primary and secondary nuclear reaction products, due to 9Be + p interaction, were observed with fast ion loss detectors, γ-ray spectrometers and neutron flux monitors and spectrometers. The possibility of using 9Be(p, d)2α and 9Be(p, α)6Li nuclear reactions to create a population of fast alpha particles and study their behaviour in non-active stage of ITER operation is discussed in the paper.
|
|
3. |
- Joffrin, E., et al.
(författare)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
4. |
- Abel, I, et al.
(författare)
-
Overview of the JET results with the ITER-like wall
- 2013
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10, s. 104002-
-
Tidskriftsartikel (refereegranskat)abstract
- Following the completion in May 2011 of the shutdown for the installation of the beryllium wall and the tungsten divertor, the first set of JET campaigns have addressed the investigation of the retention properties and the development of operational scenarios with the new plasma-facing materials. The large reduction in the carbon content (more than a factor ten) led to a much lower Z(eff) (1.2-1.4) during L- and H-mode plasmas, and radiation during the burn-through phase of the plasma initiation with the consequence that breakdown failures are almost absent. Gas balance experiments have shown that the fuel retention rate with the new wall is substantially reduced with respect to the C wall. The re-establishment of the baseline H-mode and hybrid scenarios compatible with the new wall has required an optimization of the control of metallic impurity sources and heat loads. Stable type-I ELMy H-mode regimes with H-98,H-y2 close to 1 and beta(N) similar to 1.6 have been achieved using gas injection. ELM frequency is a key factor for the control of the metallic impurity accumulation. Pedestal temperatures tend to be lower with the new wall, leading to reduced confinement, but nitrogen seeding restores high pedestal temperatures and confinement. Compared with the carbon wall, major disruptions with the new wall show a lower radiated power and a slower current quench. The higher heat loads on Be wall plasma-facing components due to lower radiation made the routine use of massive gas injection for disruption mitigation essential.
|
|
5. |
- Romanelli, F, et al.
(författare)
-
Overview of the JET results
- 2011
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 51:9
-
Tidskriftsartikel (refereegranskat)abstract
- Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. © 2011 IAEA, Vienna.
|
|
6. |
- Cossarizza, A., et al.
(författare)
-
Guidelines for the use of flow cytometry and cell sorting in immunological studies (second edition)
- 2019
-
Ingår i: European Journal of Immunology. - : Wiley. - 0014-2980 .- 1521-4141. ; 49:10, s. 1457-1973
-
Tidskriftsartikel (refereegranskat)abstract
- These guidelines are a consensus work of a considerable number of members of the immunology and flow cytometry community. They provide the theory and key practical aspects of flow cytometry enabling immunologists to avoid the common errors that often undermine immunological data. Notably, there are comprehensive sections of all major immune cell types with helpful Tables detailing phenotypes in murine and human cells. The latest flow cytometry techniques and applications are also described, featuring examples of the data that can be generated and, importantly, how the data can be analysed. Furthermore, there are sections detailing tips, tricks and pitfalls to avoid, all written and peer-reviewed by leading experts in the field, making this an essential research companion.
|
|
7. |
|
|
8. |
|
|
9. |
- Kattge, Jens, et al.
(författare)
-
TRY plant trait database - enhanced coverage and open access
- 2020
-
Ingår i: Global Change Biology. - : Wiley-Blackwell. - 1354-1013 .- 1365-2486. ; 26:1, s. 119-188
-
Tidskriftsartikel (refereegranskat)abstract
- Plant traits-the morphological, anatomical, physiological, biochemical and phenological characteristics of plants-determine how plants respond to environmental factors, affect other trophic levels, and influence ecosystem properties and their benefits and detriments to people. Plant trait data thus represent the basis for a vast area of research spanning from evolutionary biology, community and functional ecology, to biodiversity conservation, ecosystem and landscape management, restoration, biogeography and earth system modelling. Since its foundation in 2007, the TRY database of plant traits has grown continuously. It now provides unprecedented data coverage under an open access data policy and is the main plant trait database used by the research community worldwide. Increasingly, the TRY database also supports new frontiers of trait-based plant research, including the identification of data gaps and the subsequent mobilization or measurement of new data. To support this development, in this article we evaluate the extent of the trait data compiled in TRY and analyse emerging patterns of data coverage and representativeness. Best species coverage is achieved for categorical traits-almost complete coverage for 'plant growth form'. However, most traits relevant for ecology and vegetation modelling are characterized by continuous intraspecific variation and trait-environmental relationships. These traits have to be measured on individual plants in their respective environment. Despite unprecedented data coverage, we observe a humbling lack of completeness and representativeness of these continuous traits in many aspects. We, therefore, conclude that reducing data gaps and biases in the TRY database remains a key challenge and requires a coordinated approach to data mobilization and trait measurements. This can only be achieved in collaboration with other initiatives.
|
|
10. |
|
|
11. |
- Eversmann, D., et al.
(författare)
-
New Method for a Continuous Determination of the Spin Tune in Storage Rings and Implications for Precision Experiments
- 2015
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 115:9
-
Tidskriftsartikel (refereegranskat)abstract
- A new method to determine the spin tune is described and tested. In an ideal planar magnetic ring, the spin tune-defined as the number of spin precessions per turn-is given by nu(s) = gamma G (gamma is the Lorentz factor, G the gyromagnetic anomaly). At 970 MeV/c, the deuteron spins coherently process at a frequency of approximate to 120 kHz in the Cooler Synchrotron COSY. The spin tune is deduced from the up-down asymmetry of deuteron-carbon scattering. In a time interval of 2.6 s, the spin tune was determined with a precision of the order 10(-8), and to 1 x 10(-10) for a continuous 100 s accelerator cycle. This renders the presented method a new precision tool for accelerator physics; controlling the spin motion of particles to high precision is mandatory, in particular, for the measurement of electric dipole moments of charged particles in a storage ring.
|
|
12. |
- Guidoboni, G., et al.
(författare)
-
How to Reach a Thousand-Second in-Plane Polarization Lifetime with 0.97-GeV/c Deuterons in a Storage Ring
- 2016
-
Ingår i: Physical Review Letters. - : American Physical Society. - 0031-9007 .- 1079-7114. ; 117:5
-
Tidskriftsartikel (refereegranskat)abstract
- We observe a deuteron beam polarization lifetime near 1000 s in the horizontal plane of a magnetic storage ring (COSY). This long spin coherence time is maintained through a combination of beam bunching, electron cooling, sextupole field corrections, and the suppression of collective effects through beam current limits. This record lifetime is required for a storage ring search for an intrinsic electric dipole moment on the deuteron at a statistical sensitivity level approaching 10(-29) e cm.
|
|
13. |
- Villa, Luisa L., et al.
(författare)
-
Quadrivalent vaccine against human papillomavirus to prevent high-grade cervical lesions
- 2007
-
Ingår i: New England Journal of Medicine. - 0028-4793 .- 1533-4406. ; 356:19, s. 1915-1927
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Human papillomavirus types 16 (HPV-16) and 18 (HPV-18) cause approximately 70% of cervical cancers worldwide. A phase 3 trial was conducted to evaluate a quadrivalent vaccine against HPV types 6, 11, 16, and 18 (HPV-6/11/16/18) for the prevention of high-grade cervical lesions associated with HPV-16 and HPV-18. METHODS: In this randomized, double-blind trial, we assigned 12,167 women between the ages of 15 and 26 years to receive three doses of either HPV-6/11/16/18 vaccine or placebo, administered at day 1, month 2, and month 6. The primary analysis was performed for a per-protocol susceptible population that included 5305 women in the vaccine group and 5260 in the placebo group who had no virologic evidence of infection with HPV-16 or HPV-18 through 1 month after the third dose (month 7). The primary composite end point was cervical intraepithelial neoplasia grade 2 or 3, adenocarcinoma in situ, or cervical cancer related to HPV-16 or HPV-18. RESULTS: Subjects were followed for an average of 3 years after receiving the first dose of vaccine or placebo. Vaccine efficacy for the prevention of the primary composite end point was 98% (95.89% confidence interval [CI], 86 to 100) in the per-protocol susceptible population and 44% (95% CI, 26 to 58) in an intention-to-treat population of all women who had undergone randomization (those with or without previous infection). The estimated vaccine efficacy against all high-grade cervical lesions, regardless of causal HPV type, in this intention-to-treat population was 17% (95% CI, 1 to 31). CONCLUSIONS: In young women who had not been previously infected with HPV-16 or HPV-18, those in the vaccine group had a significantly lower occurrence of high-grade cervical intraepithelial neoplasia related to HPV-16 or HPV-18 than did those in the placebo group.
|
|
14. |
- Rubel, Marek, et al.
(författare)
-
Overview of erosion-deposition diagnostic tools for the ITER-Like Wall in the JET tokamak
- 2013
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 438, s. S1204-S1207
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents scientific and technical issues related to the development of erosion-deposition diagnostic tools for JET operated with the ITER-Like Wall: beryllium and tungsten marker tiles and several types of wall probes installed in the main chamber and in the divertor. Markers tiles are the standard limiter and divertor components additionally coated first with a thin sandwich of Ni-Be and Mo-W for, beryllium and tungsten markers, respectively. Both types of markers are embedded in regular arrays of limiter and divertor tiles. Coated W-Be probes are also inserted in the Be-covered Inconel cladding tiles on the central column. Other types of erosion-deposition diagnostic tools are: rotating collectors, deposition traps, louver clips, quartz microbalance and mirrors for the First Mirror Test at JET for ITER. The specific role of these tools is discussed in detail.
|
|
15. |
|
|
16. |
|
|
17. |
|
|
18. |
- Cobet, C., et al.
(författare)
-
Optical properties of SiC investigated by spectroscopic ellipsometry from 3.5 to 10 eV
- 2000
-
Ingår i: Thin Solid Films. - 0040-6090 .- 1879-2731. ; 364:1, s. 111-113
-
Tidskriftsartikel (refereegranskat)abstract
- In this work we present the dielectric function of hexagonal 4H- and 6H-SiC polytypes as well as the cubic 3C-SiC polytype in the energy range from 3.5 to 10 eV measured by spectroscopic ellipsometry. We operated with synchrotron radiation at the Berlin electron storage ring BESSY I. Additionally the samples were investigated by atomic force microscopy to correct the measured dielectric function for the influence of surface roughness. The experimental results are compared to theoretical calculations.
|
|
19. |
- Cobet, C, et al.
(författare)
-
Optical properties of wurtzite AlxGa1-xN (x < 0.1) parallel and perpendicular to the c axis
- 2001
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 64:16
-
Tidskriftsartikel (refereegranskat)abstract
- Measurements of the dielectric function components parallel and perpendicular to the optical axis of wurtzite GaN are presented. The results are obtained on a multilayer AlxGa1-xN / GaN film grown on gamma -LiAlO2 which exhibits a very small amount of Al (x<0.1) in the uppermost layer. We use the spectroscopic ellipsometry to determine (omega) around the interband critical points of GaN up to 9 eV. Since the optical axis of the films are parallel to the surface, a separation of the different epsilon components is possible. The line shape of the measured tensor components e(parallel to) and epsilon (perpendicular to) is in very good agreement with results of recently published band-structure calculations. By comparison with the calculations we assign structures in the dielectric function to critical points in the Brillouin zone. In addition, a comparison with similar spectra for CdS and CdSe is presented, together with a discussion of possible spin-orbit splitting effects.
|
|
20. |
- Edwards, NV, et al.
(författare)
-
Real-time assessment of overlayer removal on 4H-SiC surfaces : Techniques and relevance to contact formation
- 2000
-
Ingår i: Materials Science Forum. - 0255-5476 .- 1662-9752. ; 338-3, s. 1033-1036
-
Tidskriftsartikel (refereegranskat)abstract
- We applied real-time spectroscopic ellipsometric (SE) measurements to assess the removal of overlayer material from 4H-SiC Si- and C-face surfaces in order to investigate the final step of an otherwise standard RCA cleaning regimen commonly used to prepare SiC surfaces for contact formation. The selected treatments (buffered hydrofluoric acid (HF), concentrated HF, dilute HF and 5% HF in Methanol) removed 4 to 40 Angstrom of effective SiO2 overlayer thickness from these surfaces. We also found that the concentrated HF treatment yielded the best surface, i.e. the most abrupt bulk-to-ambient transition region.
|
|
21. |
- Edwards, NV, et al.
(författare)
-
Real-time assessment of selected surface preparation regimens for 4H-SiC surfaces using spectroscopic ellipsometry
- 2000
-
Ingår i: Surface Science. - : Elsevier. - 0039-6028 .- 1879-2758. ; 464:1, s. L703-L707
-
Tidskriftsartikel (refereegranskat)abstract
- Spectroscopic ellipsometry (SE) was used to assess the removal of overlayer material from 4H-SiC (0001) and (0001) [Si- and C-face] surfaces in real time and, in particular, the critical final step of an otherwise standard RCA cleaning regimen commonly used to prepare SiC surfaces for contact formation. The treatments selected [buffered hydrofluoric acid (HF), concentrated HF, and dilute HF] removed 4-40 Angstrom of effective SiO2 overlayer thickness from these surfaces. The concentrated HF treatment yielded the best surface, i.e. that with the most abrupt transition region between bulk and surface and with the most oxide material removed. A fourth treatment regimen (sequential application of methanol, water, and 5% HF in methanol) was also developed for comparison with the full RCA clean. (C) 2000 Elsevier Science B.V. All rights reserved.
|
|
22. |
- Edwards, N.V., et al.
(författare)
-
Optical characterization of wide bandgap semiconductors
- 2000
-
Ingår i: Thin Solid Films. - 0040-6090 .- 1879-2731. ; 364:1, s. 98-106
-
Tidskriftsartikel (refereegranskat)abstract
- Our work primarily concerns the characterization of wide-gap III-V nitride semiconductors, nondestructively and at variable temperature, with spectroscopic ellipsometry (SE) and reflectometry in the spectral range from 1.5 to 6 eV. In the case of GaN, there are three main concerns associated with such data: (a) the quantification of the dispersion of the index of refraction with energy, (b) the removal of surface overlayers in real-time, and (c) the determination of the variation of valence bands with biaxial stress and the quantification of residual stress in thin films. The SE and reflectance capabilities provide (1) broadband spectra from 1.5 to 6 eV, which yield information about (a) below the bandgap and (b) above it, and (2) high resolution spectra (less than 1 meV at 3.4 eV) in the vicinity of the gap (3.3-3.6 eV), which enables (c). Here we will discuss issues concerning the relation of (c) to GaN material and growth parameters, though similar data for other wide bandgap materials will be discussed where relevant. Specifically, optimal heterostructure design for potential valence band engineering applications will be discussed in the context of trends in residual stress as a function of film thickness, growth temperature and substrate orientation for GaN/AlN/6H-SiC heterostructures. Standard heterostructures are mostly compressive for samples less than about 0.7 µm thick, are tensile up to about 2 µm and then abruptly become less tensile with stress values near 1 kbar thereafter. Additionally, these trends can be circumvented for moderately thick (approximately 2 µm) GaN layers (normally>2 kbar, tensile) by the introduction of a `buried interface' approach, namely, a strain mediating layer (SML) above the standard high-temperature AlN buffer layer designed to yield a range of compressive stresses from 0 to 2 kbar. The strain characteristics but also the growth rates of subsequently deposited nitride layers can be modulated by changing the growth parameters of the SML. This is achieved by in situ techniques during crystal growth without degrading the optical and structural properties of the deposited layer, as confirmed by XRD, SEM, PL, and AFM data taken on the overlying GaN layers. These results are interpreted in terms of coefficient of thermal expansion data for the layers and data concerning the planarization of GaN layers and growth behavior in non-(0001) directions.
|
|
23. |
|
|
24. |
- Esser, C, et al.
(författare)
-
The aryl hydrocarbon receptor in immunity
- 2009
-
Ingår i: Trends in immunology. - : Elsevier BV. - 1471-4981 .- 1471-4906. ; 30:9, s. 447-454
-
Tidskriftsartikel (refereegranskat)
|
|
25. |
|
|