| 1. |
- Tran, K. B., et al.
(författare)
-
The global burden of cancer attributable to risk factors, 2010-19: a systematic analysis for the Global Burden of Disease Study 2019
- 2022
-
Ingår i: Lancet. - 0140-6736. ; 400:10352, s. 563-591
-
Tidskriftsartikel (refereegranskat)abstract
- Background Understanding the magnitude of cancer burden attributable to potentially modifiable risk factors is crucial for development of effective prevention and mitigation strategies. We analysed results from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019 to inform cancer control planning efforts globally. Methods The GBD 2019 comparative risk assessment framework was used to estimate cancer burden attributable to behavioural, environmental and occupational, and metabolic risk factors. A total of 82 risk-outcome pairs were included on the basis of the World Cancer Research Fund criteria. Estimated cancer deaths and disability-adjusted life-years (DALYs) in 2019 and change in these measures between 2010 and 2019 are presented. Findings Globally, in 2019, the risk factors included in this analysis accounted for 4.45 million (95% uncertainty interval 4.01-4.94) deaths and 105 million (95.0-116) DALYs for both sexes combined, representing 44.4% (41.3-48.4) of all cancer deaths and 42.0% (39.1-45.6) of all DALYs. There were 2.88 million (2.60-3.18) risk-attributable cancer deaths in males (50.6% [47.8-54.1] of all male cancer deaths) and 1.58 million (1.36-1.84) risk-attributable cancer deaths in females (36.3% [32.5-41.3] of all female cancer deaths). The leading risk factors at the most detailed level globally for risk-attributable cancer deaths and DALYs in 2019 for both sexes combined were smoking, followed by alcohol use and high BMI. Risk-attributable cancer burden varied by world region and Socio-demographic Index (SDI), with smoking, unsafe sex, and alcohol use being the three leading risk factors for risk-attributable cancer DALYs in low SDI locations in 2019, whereas DALYs in high SDI locations mirrored the top three global risk factor rankings. From 2010 to 2019, global risk-attributable cancer deaths increased by 20.4% (12.6-28.4) and DALYs by 16.8% (8.8-25.0), with the greatest percentage increase in metabolic risks (34.7% [27.9-42.8] and 33.3% [25.8-42.0]). Interpretation The leading risk factors contributing to global cancer burden in 2019 were behavioural, whereas metabolic risk factors saw the largest increases between 2010 and 2019. Reducing exposure to these modifiable risk factors would decrease cancer mortality and DALY rates worldwide, and policies should be tailored appropriately to local cancer risk factor burden. Copyright (C) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.
|
|
| 2. |
- Burstein, R., et al.
(författare)
-
Mapping 123 million neonatal, infant and child deaths between 2000 and 2017
- 2019
-
Ingår i: Nature. - : Nature Publishing Group. - 0028-0836 .- 1476-4687. ; 574:7778, s. 353-358
-
Tidskriftsartikel (refereegranskat)abstract
- Since 2000, many countries have achieved considerable success in improving child survival, but localized progress remains unclear. To inform efforts towards United Nations Sustainable Development Goal 3.2—to end preventable child deaths by 2030—we need consistently estimated data at the subnational level regarding child mortality rates and trends. Here we quantified, for the period 2000–2017, the subnational variation in mortality rates and number of deaths of neonates, infants and children under 5 years of age within 99 low- and middle-income countries using a geostatistical survival model. We estimated that 32% of children under 5 in these countries lived in districts that had attained rates of 25 or fewer child deaths per 1,000 live births by 2017, and that 58% of child deaths between 2000 and 2017 in these countries could have been averted in the absence of geographical inequality. This study enables the identification of high-mortality clusters, patterns of progress and geographical inequalities to inform appropriate investments and implementations that will help to improve the health of all populations. © 2019, The Author(s).
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Abdollahpour, N., et al.
(författare)
-
An improving working condition system (health, safety and ergonomics) survey and analysis with macroergonomics approach in a manufacturing company from Iran Power Plant Industry in 2010
- 2013
-
Ingår i: Iran Occupational Health. - 1735-5133 .- 2228-7493. ; 10:4, s. 55-64
-
Tidskriftsartikel (refereegranskat)abstract
- Background and aims: World experience has shown the positive effect of applying ergonomics in improving work conditions, of quality and quantity of production, reducing prevalence of work-related musculoskeletal disorders, saving costs and increase of productivity in the different contents. These are possible only with utilizing properly improving work condition system and Macroergonomics approach. The aim of the study was how determine situation and analyzing the working conditions using the macroergonomics approach in a Power Plant Industry. Methods: This study is a cross-sectional study. First, the program for improvement of work conditions were evaluated using three questionnaires including managers viewpoint (29 samples), health, safety and environment employees viewpoint (5 samples) and operating workers viewpoint (85 samples) and then three other instruments of macroergonomics were used. Results: According to the results of 1) questionnaires and corresponding tests, three of the program's goals of improving working conditions and promotion practices that have the same opinions, but in some cases had different opinions. 2) Future workshops and interviews, the lack of participatory leadership and lack of collaborative work systems for the company stated. 3) Apply ergonomics checklist of ILO, an appropriate interaction between the top and bottom surfaces revealed. Conclusion: Awakened needs of change in the middle and lower levels of organization to solve problems relate to improving working conditions of the system was created. To implement an Ergonomics Intervention Programme Technique Process requires the full support management and employees.
|
|
| 11. |
- Hoseini-Athar, M. M., et al.
(författare)
-
Effect of Zn addition on dynamic recrystallization behavior of Mg-2Gd alloy during high-temperature deformation
- 2019
-
Ingår i: Journal of Alloys and Compounds. - : ELSEVIER SCIENCE SA. - 0925-8388 .- 1873-4669. ; 806, s. 1200-1206
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of Zn/Gd ratio on dynamic recrystallization (DRX) of Mg-2Gd-xZn (x = 0, 1, 2 and 3 wt%) alloys was investigated by shear punch tests in the temperature range of 623-723 K and shear strain rate range of 1.0 x 10(-2)-1.2 x 10(-1) s(-1). It was observed that at low Zn/Gd ratio, excessive co-segregation of Gd and Zn solute atoms retards recrystallization and provides higher strength. At high Zn/Gd ratios, precipitation reduces the co-segregation, so that the alloy with Zn/Gd = 1.5, experienced the fastest DRX and the lowest strength. In addition, segregation resulted in a weaker texture, by elimination of nucleation and growth of the preferred orientations. rights reserved.
|
|
| 12. |
|
|
| 13. |
- Hoseini-Athar, M. M., et al.
(författare)
-
Microstructural evolution and superplastic behavior of a fine-grained Mg-Gd alloy processed by constrained groove pressing
- 2019
-
Ingår i: Materials Science & Engineering. - : ELSEVIER SCIENCE SA. - 0921-5093 .- 1873-4936. ; 754, s. 390-399
-
Tidskriftsartikel (refereegranskat)abstract
- In the current study, microstructural evolution and superplasticity of an extruded Mg-2wt% Gd sheet were studied after the constrained groove pressing (CGP) process. Microstructural observations by scanning electron microscopy and electron backscattered diffraction revealed that after 4 cycles of CGP, a rather homogeneous fine-grained microstructure with an average grain size of 4.3 mu m, and a large fraction of high angle grain boundaries was obtained. By performing shear punch tests (SPT) at different temperatures and various shear strain rates, a peak strain rate sensitivity index (m-value) of 0.49 was obtained after 4 cycles of CGP process at 673 K, while peak m-values of 0.31 and 0.36 were obtained for the as-extruded and 2 cycle CGP process conditions, respectively. An m-value of 0.49 and an activation energy of 113 kJ/mol, obtained for the fine-grained material after 4 cycles of CGP, suggest that the dominant deformation mechanism in the superplastic regime is grain boundary sliding (GBS) controlled by grain boundary diffusion.
|
|
| 14. |
- Hoseini-Athar, M. M., et al.
(författare)
-
Microstructure, texture, and strain-hardening behavior of extruded Mg-Gd-Zn alloys
- 2020
-
Ingår i: Materials Science & Engineering. - : ELSEVIER SCIENCE SA. - 0921-5093 .- 1873-4936. ; 772
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of Zn content on the microstructure, texture, mechanical properties and strain-hardening behavior of extruded Mg-2Gd-xZn (x = 0, 1, 2 and 3 wt%) sheets was investigated. Evaluation of texture revealed that while all of the alloys exhibited weak textures, the texture component was altered from a basal to a non-basal one by the addition of Zn. A typical transverse direction (TD) split texture with basal poles rotated about 40 degrees from the normal direction (ND) toward TD was observed for the Zn-containing alloys, the effect being more pronounced at higher Zn contents. Furthermore, the Mg-2Gd-1Zn alloy exhibited the weakest texture due to solute drag imposed by co-segregation of Zn and Gd atoms at grain boundaries. Addition of Zn also resulted in a general increase in yield stress, ultimate tensile strength and elongation along the extrusion direction from 99 to 172 MPa, 178 to 263 MPa, and 25 to 35% for Mg-2Gd and Mg-2Gd-3Zn alloys, respectively. However, increasing Zn content was accompanied by an initial decrease in anisotropy of mechanical properties and strain-hardening behavior, followed by an increase at higher Zn contents. This was due to the difference of orientation of basal planes with regard to tension direction. As a result, lower yield stress, higher elongation and strain-hardening capacity was obtained along TD (with higher Schmid factor for basal slip) compared to ED. It was concluded that excellent mechanical properties and low anisotropy can be achieved in the Mg-2Gd-1Zn alloy.
|
|
| 15. |
- Ghomi, Erfan Rezvani, et al.
(författare)
-
A collection of the novel coronavirus (COVID-19) detection assays, issues, and challenges
- 2021
-
Ingår i: Heliyon. - : Elsevier BV. - 2405-8440. ; 7:6
-
Forskningsöversikt (refereegranskat)abstract
- The global pandemic of COVID-19 has rapidly increased the number of infected cases as well as asymptomatic individuals in many, if not all the societies around the world. This issue increases the demand for accurate and rapid detection of SARS-CoV-2. While accurate and rapid detection is critical for diagnosing SARS-CoV-2, the appropriate course of treatment must be chosen to help patients and prevent its further spread. Testing platform accuracy with high sensitivity and specificity for SARS-CoV-2 is equally important for clinical, regional, and global arenas to mitigate secondary transmission rounds. The objective of this article is to compare the current detection technology and introduce the most accurate and rapid ones that are suitable for pandemic circumstances. Hence, the importance of rapid detection in societies is discussed initially. Following this, the current technology for rapid detection of SARS-CoV-2 is explained and classified into three different categories: nucleic acid-based, protein-based, and point of care (PoC) detection testing. Then, the current issues for diagnostic procedures in laboratories are discussed. Finally, the role of new technologies in countering COVID-19 is also introduced to assist researchers in the development of accurate and timely detection of coronaviruses. As coronavirus continues to affect human lives in a detrimental manner, the development of rapid and accurate virus detection methods could promote COVID-19 diagnosis accessible to both individuals and the mass population at patient care. In this regard, rRT-PCR and multiplex RT-PCR detection techniques hold promise.
|
|
