| 1. |
|
|
| 2. |
|
|
| 3. |
- Khuyagbaatar, J., et al.
(författare)
-
Fission in the landscape of heaviest elements: Some recent examples
- 2016
-
Ingår i: Nobel Symposium NS 160 – Chemistry and Physics of Heavy and Superheavy Elements. - : EDP Sciences. - 9782759890118 ; 131
-
Konferensbidrag (refereegranskat)abstract
- The fission process still remains a main factor that determines the stability of the atomic nucleus of heaviest elements. Fission half-lives vary over a wide range, 10^−19 to 10^24 s. Present experimental techniques for the synthesis of the superheavy elements that usually measure α-decay chains are sensitive only in a limited range of half-lives, often 10^5 to 10^3 s. In the past years, measurement techniques for very short-lived and very long-lived nuclei were significantly improved at the gas-filled recoil separator TASCA at GSI Darmstadt. Recently, several experimental studies of fission-related phenomena have successfully been performed. In this paper, results on 254−256Rf and 266Lr are presented and corresponding factors for retarding the fission process are discussed.
|
|
| 4. |
- Forsberg, Ulrika, et al.
(författare)
-
First Experiment at TASCA Towards X-Ray Fingerprinting of Element 115 Decay Chains
- 2012
-
Ingår i: Acta Physica Polonica. Series B: Elementary Particle Physics, Nuclear Physics, Statistical Physics, Theory of Relativity, Field Theory. - 0587-4254. ; 43:2, s. 305-311
-
Tidskriftsartikel (refereegranskat)abstract
- To identify the atomic number of superheavy nuclei produced in Ca-48-induced fusion-evaporation reactions, an experiment aiming at measuring characteristic X-rays is being prepared at GSI, Darmstadt, Germany. The gas-filled separator TASCA will be employed, sending the residues towards the multi-coincidence detector setup TASISpec. Two ion-optical modes relying on differing magnetic polarities of the quadrupole magnets can be used at TASCA. New simulations and experimental tests of transmission and background suppression for these two focusing modes into TASISpec are presented.
|
|
| 5. |
- Khuyagbaatar, J., et al.
(författare)
-
New Short-Lived Isotope 221U and the Mass Surface Near N=126
- 2015
-
Ingår i: Physical Review Letters. - 1079-7114. ; 115:24
-
Tidskriftsartikel (refereegranskat)abstract
- Two short-lived isotopes 221U and 222U were produced as evaporation residues in the fusion reaction 50Ti+176Yb at the gas-filled recoil separator TASCA. An α decay with an energy of Eα=9.31(5) MeV and half-life T1/2=4.7(7) μs was attributed to 222U. The new isotope 221U was identified in α-decay chains starting with Eα=9.71(5) MeV and T1/2=0.66(14) μs leading to known daughters. Synthesis and detection of these unstable heavy nuclei and their descendants were achieved thanks to a fast data readout system. The evolution of the N=126 shell closure and its influence on the stability of uranium isotopes are discussed within the framework of α-decay reduced width.
|
|
| 6. |
|
|
| 7. |
- Jeppsson, Lennart, et al.
(författare)
-
High-resolution Late Silurian correlations between Gotland, Sweden and the Broken River region, NE Australia: Lithologies, conodonts and isotopes
- 2007
-
Ingår i: Palaeogeography, Palaeoclimatology, Palaeoecology. - : Elsevier BV. - 0031-0182 .- 1872-616X. ; 245:1-2, s. 115-137
-
Konferensbidrag (refereegranskat)abstract
- High-resolution correlations, partly with a precision better than 10 ka, are achieved between late Ludfordian sequences on Gotland, Sweden (on Baltica), and a section (COG) through the Coral Gardens Formation along the Broken River, northeastern Australia (on Gondwana), despite these sections having been on different palaeocontinents facing different oceans. The interval is characterised by rapid, very large faunal, isotopic, and lithologic changes. Lithologies are remarkably similar in the two areas, consisting of, in order from below: marls with thin limestone beds, flaggy limestones, oncoidal crinoidal limestone, oncoidal marls, terrigenous clastics (silty clay, mudstone, sandstone), oolite, and cliff-/gorge-forming limestones. Further, independent correlation dates several of the lithological changes as coeval. The 813 C excursion in whole rock carbonates is one of the three largest ones known during the Phanerozoic. The increase in delta C-13 is very similar in the two areas, from below + 1 parts per thousand to c. + 9 parts per thousand VPDB though two Gotland samples yielded + 9.71 parts per thousand and + 10.54 parts per thousand (the corresponding COG interval included fewer carbonate layers than needed to definitely exclude that this difference is due to a lack of suitable rocks for sampling). Compared with the lithologies and the delta C-13 curves, the conodont faunas display some divergence, but key taxa permit precise correlations for much of the studied interval. The conodont assemblages change stepwise from very diverse in the Polygnathoides siluricus Zone to a low diversity fauna dominated markedly by a single taxon (Upper Icriodontid Subzone), returning abruptly to a comparatively diverse Ozarkodina snajdri Zone fauna. A method resembling graphic correlation in some respects is used to propose a similarly high-resolution correlation through a longer interval for future testing. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 8. |
- Jeppsson, Ulf, et al.
(författare)
-
Benchmark simulation models, quo vadis?
- 2013
-
Ingår i: Water Science and Technology. - : IWA Publishing. - 0273-1223 .- 1996-9732. ; 68:1, s. 1-15
-
Tidskriftsartikel (refereegranskat)abstract
- As the work of the IWA Task Group on Benchmarking of Control Strategies for wastewater treatment plants (WWTPs) is coming to an end, it is essential to disseminate the knowledge gained. For this reason, all authors of the IWA Scientific and Technical Report on benchmarking have come together to provide their insights, highlighting areas where knowledge may still be deficient and where new opportunities are emerging, and to propose potential avenues for future development and application of the general benchmarking framework and its associated tools. The paper focuses on the topics of temporal and spatial extension, process modifications within the WWTP, the realism of models, control strategy extensions and the potential for new evaluation tools within the existing benchmark system. We find that there are major opportunities for application within all of these areas, either from existing work already being done within the context of the benchmarking simulation models (BSMs) or applicable work in the wider literature. Of key importance is increasing capability, usability and transparency of the BSM package while avoiding unnecessary complexity.
|
|
| 9. |
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
- Jeppsson, Ulf, et al.
(författare)
-
Benchmark simulation model no 2: general protocol and exploratory case studies
- 2007
-
Ingår i: Water Science and Technology. - : IWA Publishing. - 0273-1223 .- 1996-9732. ; 56:8, s. 67-78
-
Tidskriftsartikel (refereegranskat)abstract
- Over a decade ago, the concept of objectively evaluating the performance of control strategies by simulating them using a standard model implementation was introduced for activated sludge wastewater treatment plants. The resulting Benchmark Simulation Model No 1 (BSM1) has been the basis for a significant new development that is reported on here: Rather than only evaluating control strategies at the level of the activated sludge unit (bioreactors and secondary clarifier) the new BSM2 now allows the evaluation of control strategies at the level of the whole plant, including primary clarifier and sludge treatment with anaerobic sludge digestion. In this contribution, the decisions that have been made over the past three years regarding the models used within the BSM2 are presented and argued, with particular emphasis on the ADM1 description of the digester, the interfaces between activated sludge and digester models, the included temperature dependencies and the reject water storage. BSM2-implementations are now available in a wide range of simulation platforms and a ring test has verified their proper implementation, consistent with the BSM2 definition. This guarantees that users can focus on the control strategy evaluation rather than on modelling issues. Finally, for illustration, twelve simple operational strategies have been implemented in BSM2 and their performance evaluated. Results show that it is an interesting control engineering challenge to further improve the performance of the BSM2 plant (which is the whole idea behind benchmarking) and that integrated control (i.e. acting at different places in the whole plant) is certainly worthwhile to achieve overall improvement.
|
|
| 18. |
- Kiviniemi, T., et al.
(författare)
-
A randomized prospective multicenter trial for stroke prevention by prophylactic surgical closure of the left atrial appendage in patients undergoing bioprosthetic aortic valve surgery––LAA-CLOSURE trial protocol
- 2021
-
Ingår i: American Heart Journal. - : Elsevier BV. - 0002-8703 .- 1097-6744. ; 237, s. 127-134
-
Tidskriftsartikel (refereegranskat)abstract
- Patients undergoing surgical aortic valve replacement (SAVR) are at high risk for atrial fibrillation (AF) and stroke after surgery. There is an unmet clinical need to improve stroke prevention in this patient population. The LAA-CLOSURE trial aims to assess the efficacy and safety of prophylactic surgical closure of the left atrial appendage for stroke and cardiovascular death prevention in patients undergoing bioprosthetic SAVR. This randomized, open-label, prospective multicenter trial will enroll 1,040 patients at 13 European sites. The primary endpoint is a composite of cardiovascular mortality, stroke and systemic embolism at 5 years. Secondary endpoints include cardiovascular mortality, stroke, systemic embolism, bleed fulfilling academic research consortium (BARC) criteria, hospitalization for decompensated heart failure and health economic evaluation. Sample size is based on 30% risk reduction in time to event analysis of primary endpoint. Prespecified reports include 30-day safety analysis focusing on AF occurrence and short-term outcomes and interim analyses at 1 and 3 years for primary and secondary outcomes. Additionally, substudies will be performed on the completeness of the closure using transesophageal echocardiography/cardiac computed tomography and long-term ECG recording at one year after the operation. © 2021 The Author(s)
|
|
| 19. |
- Michaud, Dominique S., et al.
(författare)
-
Lifestyle, dietary factors, and antibody levels to oral bacteria in cancer-free participants of a European cohort study
- 2013
-
Ingår i: Cancer Causes and Control. - : Springer Netherlands. - 0957-5243 .- 1573-7225. ; 24:11, s. 1901-1909
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Increasing evidence suggests that oral microbiota play a pivotal role in chronic diseases, in addition to the well-established role in periodontal disease. Moreover, recent studies suggest that oral bacteria may also be involved in carcinogenesis; periodontal disease has been linked to several cancers. In this study, we examined whether lifestyle factors have an impact on antibody levels to oral bacteria.METHODS: Data on demographic characteristics, lifestyle factors, and medical conditions were obtained at the time of blood sample collection. For the current analysis, we measured antibody levels to 25 oral bacteria in 395 cancer-free individuals using an immunoblot array. Combined total immunoglobin G (IgG) levels were obtained by summing concentrations for all oral bacteria measured.RESULTS: IgG antibody levels were substantially lower among current and former smokers (1,697 and 1,677 ng/mL, respectively) than never smokers (1,960 ng/mL; p trend = 0.01), but did not vary by other factors, including body mass index, diabetes, physical activity, or by dietary factors, after adjusting for age, sex, education, country, and smoking status. The highest levels of total IgG were found among individuals with low education (2,419 ng/mL).CONCLUSIONS: Our findings on smoking are consistent with previous studies and support the notion that smokers have a compromised humoral immune response. Moreover, other major factors known to be associated with inflammatory markers, including obesity, were not associated with antibody levels to a large number of oral bacteria.
|
|
| 20. |
- Nopens, I., et al.
(författare)
-
Benchmark Simulation Model No 2: finalisation of plant layout and default control strategy
- 2010
-
Ingår i: Water Science and Technology. - : IWA Publishing. - 0273-1223 .- 1996-9732. ; 62:9, s. 1967-1974
-
Tidskriftsartikel (refereegranskat)abstract
- The COST/IWA Benchmark Simulation Model No 1 (BSM1) has been available for almost a decade. Its primary purpose has been to create a platform for control strategy benchmarking of activated sludge processes. The fact that the research work related to the benchmark simulation models has resulted in more than 300 publications worldwide demonstrates the interest in and need of such tools within the research community. Recent efforts within the IWA Task Group on "Benchmarking of control strategies for WWTPs" have focused on an extension of the benchmark simulation model. This extension aims at facilitating control strategy development and performance evaluation at a plant-wide level and, consequently, includes both pretreatment of wastewater as well as the processes describing sludge treatment. The motivation for the extension is the increasing interest and need to operate and control wastewater treatment systems not only at an individual process level but also on a plant-wide basis. To facilitate the changes, the evaluation period has been extended to one year. A prolonged evaluation period allows for long-term control strategies to be assessed and enables the use of control handles that cannot be evaluated in a realistic fashion in the one week BSM1 evaluation period. In this paper, the finalised plant layout is summarised and, as was done for BSM1, a default control strategy is proposed. A demonstration of how BSM2 can be used to evaluate control strategies is also given.
|
|
| 21. |
- Nygård, K., et al.
(författare)
-
ForMAX – a beamline for multiscale and multimodal structural characterization of hierarchical materials
- 2024
-
Ingår i: Journal of Synchrotron Radiation. - : International Union of Crystallography (IUCr). - 0909-0495 .- 1600-5775. ; 31:Pt 2, s. 363-377
-
Tidskriftsartikel (refereegranskat)abstract
- The ForMAX beamline at the MAX IV Laboratory provides multiscale and multimodal structural characterization of hierarchical materials in the nanometre to millimetre range by combining small- and wide-angle X-ray scattering with full-field microtomography. The modular design of the beamline is optimized for easy switching between different experimental modalities. The beamline has a special focus on the development of novel fibrous materials from forest resources, but it is also well suited for studies within, for example, food science and biomedical research.
|
|
| 22. |
- Olsson, Gustaf, et al.
(författare)
-
Instrumentation, control and automation in wastewater – from London 1973 to Narbonne 2013
- 2014
-
Ingår i: Water Science and Technology. - : IWA Publishing. - 0273-1223 .- 1996-9732. ; 69:7, s. 1373-1385
-
Tidskriftsartikel (refereegranskat)abstract
- Key developments of instrumentation, control and automation (ICA) applications in wastewater systems during the past 40 years are highlighted in this paper. From the first ICA conference in 1973 through to today there has been a tremendous increase in the understanding of the processes, instrumentation, computer systems and control theory. However, many developments have not been addressed here, such as sewer control, drinking water treatment and water distribution control. It is hoped that this review can stimulate new attempts to more effectively apply control and automation in water systems in the coming years.
|
|
| 23. |
|
|
| 24. |
|
|
| 25. |
|
|
