| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
|
|
| 3. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 4. |
|
|
| 5. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2016 Challenge Results
- 2016
-
Ingår i: COMPUTER VISION - ECCV 2016 WORKSHOPS, PT II. - Cham : SPRINGER INT PUBLISHING AG. - 9783319488813 - 9783319488806 ; , s. 777-823
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2016 aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 70 trackers are presented, with a large number of trackers being published at major computer vision conferences and journals in the recent years. The number of tested state-of-the-art trackers makes the VOT 2016 the largest and most challenging benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the Appendix. The VOT2016 goes beyond its predecessors by (i) introducing a new semi-automatic ground truth bounding box annotation methodology and (ii) extending the evaluation system with the no-reset experiment.
|
|
| 6. |
- Zhang, Guojie, et al.
(författare)
-
Comparative genomics reveals insights into avian genome evolution and adaptation
- 2014
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 346:6215, s. 1311-1320
-
Tidskriftsartikel (refereegranskat)abstract
- Birds are the most species-rich class of tetrapod vertebrates and have wide relevance across many research fields. We explored bird macroevolution using full genomes from 48 avian species representing all major extant clades. The avian genome is principally characterized by its constrained size, which predominantly arose because of lineage-specific erosion of repetitive elements, large segmental deletions, and gene loss. Avian genomes furthermore show a remarkably high degree of evolutionary stasis at the levels of nucleotide sequence, gene synteny, and chromosomal structure. Despite this pattern of conservation, we detected many non-neutral evolutionary changes in protein-coding genes and noncoding regions. These analyses reveal that pan-avian genomic diversity covaries with adaptations to different lifestyles and convergent evolution of traits.
|
|
| 7. |
- de las Fuentes, Lisa, et al.
(författare)
-
Gene-educational attainment interactions in a multi-ancestry genome-wide meta-analysis identify novel blood pressure loci
- 2021
-
Ingår i: Molecular Psychiatry. - : Springer Nature. - 1359-4184 .- 1476-5578. ; 26:6, s. 2111-2125
-
Tidskriftsartikel (refereegranskat)abstract
- Educational attainment is widely used as a surrogate for socioeconomic status (SES). Low SES is a risk factor for hypertension and high blood pressure (BP). To identify novel BP loci, we performed multi-ancestry meta-analyses accounting for gene-educational attainment interactions using two variables, “Some College” (yes/no) and “Graduated College” (yes/no). Interactions were evaluated using both a 1 degree of freedom (DF) interaction term and a 2DF joint test of genetic and interaction effects. Analyses were performed for systolic BP, diastolic BP, mean arterial pressure, and pulse pressure. We pursued genome-wide interrogation in Stage 1 studies (N = 117 438) and follow-up on promising variants in Stage 2 studies (N = 293 787) in five ancestry groups. Through combined meta-analyses of Stages 1 and 2, we identified 84 known and 18 novel BP loci at genome-wide significance level (P < 5 × 10-8). Two novel loci were identified based on the 1DF test of interaction with educational attainment, while the remaining 16 loci were identified through the 2DF joint test of genetic and interaction effects. Ten novel loci were identified in individuals of African ancestry. Several novel loci show strong biological plausibility since they involve physiologic systems implicated in BP regulation. They include genes involved in the central nervous system-adrenal signaling axis (ZDHHC17, CADPS, PIK3C2G), vascular structure and function (GNB3, CDON), and renal function (HAS2 and HAS2-AS1, SLIT3). Collectively, these findings suggest a role of educational attainment or SES in further dissection of the genetic architecture of BP.
|
|
| 8. |
- Kanoni, Stavroula, et al.
(författare)
-
Implicating genes, pleiotropy, and sexual dimorphism at blood lipid loci through multi-ancestry meta-analysis.
- 2022
-
Ingår i: Genome biology. - : Springer Science and Business Media LLC. - 1474-760X .- 1465-6906 .- 1474-7596. ; 23:1
-
Tidskriftsartikel (refereegranskat)abstract
- Genetic variants within nearly 1000 loci are known to contribute to modulation of blood lipid levels. However, the biological pathways underlying these associations are frequently unknown, limiting understanding of these findings and hindering downstream translational efforts such as drug target discovery.To expand our understanding of the underlying biological pathways and mechanisms controlling blood lipid levels, we leverage a large multi-ancestry meta-analysis (N=1,654,960) of blood lipids to prioritize putative causal genes for 2286 lipid associations using six gene prediction approaches. Using phenome-wide association (PheWAS) scans, we identify relationships of genetically predicted lipid levels to other diseases and conditions. We confirm known pleiotropic associations with cardiovascular phenotypes and determine novel associations, notably with cholelithiasis risk. We perform sex-stratified GWAS meta-analysis of lipid levels and show that 3-5% of autosomal lipid-associated loci demonstrate sex-biased effects. Finally, we report 21 novel lipid loci identified on the X chromosome. Many of the sex-biased autosomal and X chromosome lipid loci show pleiotropic associations with sex hormones, emphasizing the role of hormone regulation in lipid metabolism.Taken together, our findings provide insights into the biological mechanisms through which associated variants lead to altered lipid levels and potentially cardiovascular disease risk.
|
|
| 9. |
- Cheng, Li, et al.
(författare)
-
Safety and Protection Measures of Underground Non-Coal Mines with Mining Depth over 800 m: A Case Study in Shandong, China
- 2022
-
Ingår i: Sustainability. - : MDPI. - 2071-1050. ; 14:20
-
Tidskriftsartikel (refereegranskat)abstract
- With the increase in mining depth, the risk of ground pressure disasters in yellow gold mines is becoming more and more serious. This paper carries out a borehole test for the pressure behavior in a non-coal mining area with a mining depth of more than 800 m in the Jiaodong area. The test results show that under a depth of 1050 m, the increase in the vertical principal stress is the same as the increase in the minimum horizontal principal stress, which is about 3 MPa per 100 m. When the depth increases to 1350 m, the vertical principal stress increases by about 3% per 100 m, and the self-weight stress and the maximum horizontal principal stress maintain a steady growth rate of about 3 MPa per 100 m. In addition, based on the test results, the operation of the ground pressure monitoring system in each mine is investigated. The investigation results show that in some of the roadway and stope mines with depths of more than 800 m, varying degrees of rock mass instability have occurred, and a few mines have had sporadic slight rockbursts, accounting for about 5%. There was a stress concentration area in the lower part of the goaf formed in the early stage of mining, and slight rockburst phenomena such as rock mass ejection have occurred; meanwhile, the area stability for normal production and construction was good, and there was no obvious ground pressure. This paper compares the researched mines horizontally as well as to international high-level mines and puts forward some suggestions, including: carrying out ground pressure investigations and improving the level of intelligence, which would provide countermeasures to balance the safety risks of deep mining, reducing all kinds of safety production accidents and providing a solid basis for risk prevention and supervision.
|
|
| 10. |
- Li, Jingjing, et al.
(författare)
-
Photothermal Aerogel Beads Based on Polysaccharides: Controlled Fabrication and Hybrid Applications in Solar-Powered Interfacial Evaporation, Water Remediation, and Soil Enrichment
- 2022
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 14:44, s. 50266-50279
-
Tidskriftsartikel (refereegranskat)abstract
- Solar-powered interfacial evaporation has emerged as an innovative and sustainable technology for clean water production. However, the rapid, mass and shape-controlled fabrication of three-dimensional (3D) steam generators (SGs) for versatile hybrid applications remains challenging. Herein, composite aerogel beads with self-contained properties (i.e., hydrophilic, porous, photothermal, and durable) are developed and demonstrated for threefold hybrid applications including efficient solar-powered interfacial evaporation, water remediation, and controlled soil enrichment. The rational incorporation of selected polysaccharides enables us to fabricate bead-like aerogels with rapid gelation, continuous processing, and enhanced ion adsorption. The composite beads can attain a high water evaporation rate of 1.62 kg m-2 h-1 under 1 sun. Meanwhile, high phosphate adsorption capacity of over 120 mg g-1 is achieved in broad pH (2.5-12.4) and concentration (200-1000 mg L-1) ranges of phosphate solutions. Gratifyingly, we demonstrate the first example of recycling biomaterials from interfacial SGs for controlled nutrient release, soil enrichment, and sustainable agriculture. The phosphate-saturated beads can be gradually broken down in the soil. Macronutrients (N, P, and K) can be slowly released in 50 days, sustaining the plant germination and growth in a whole growth stage. This work shines light on the mass and controlled fabrication of aerogel beads based on double-network biopolymers, not merely scaling up solar-powered interfacial evaporation but also considering water remediation, waste material disposal, and value-added conversion.
|
|
| 11. |
- Ren, Luyao, et al.
(författare)
-
Quartet DNA reference materials and datasets for comprehensively evaluating germline variant calling performance
- 2023
-
Ingår i: Genome Biology. - : BioMed Central (BMC). - 1465-6906 .- 1474-760X. ; 24:1
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Genomic DNA reference materials are widely recognized as essential for ensuring data quality in omics research. However, relying solely on reference datasets to evaluate the accuracy of variant calling results is incomplete, as they are limited to benchmark regions. Therefore, it is important to develop DNA reference materials that enable the assessment of variant detection performance across the entire genome.RESULTS: We established a DNA reference material suite from four immortalized cell lines derived from a family of parents and monozygotic twins. Comprehensive reference datasets of 4.2 million small variants and 15,000 structural variants were integrated and certified for evaluating the reliability of germline variant calls inside the benchmark regions. Importantly, the genetic built-in-truth of the Quartet family design enables estimation of the precision of variant calls outside the benchmark regions. Using the Quartet reference materials along with study samples, batch effects are objectively monitored and alleviated by training a machine learning model with the Quartet reference datasets to remove potential artifact calls. Moreover, the matched RNA and protein reference materials and datasets from the Quartet project enables cross-omics validation of variant calls from multiomics data.CONCLUSIONS: The Quartet DNA reference materials and reference datasets provide a unique resource for objectively assessing the quality of germline variant calls throughout the whole-genome regions and improving the reliability of large-scale genomic profiling.
|
|
| 12. |
- Wang, Di, et al.
(författare)
-
Transmission of clones of carbapenem-resistant Escherichia coli between a hospital and an urban wastewater treatment plant*
- 2023
-
Ingår i: Environmental Pollution. - : Elsevier. - 0269-7491 .- 1873-6424. ; 336
-
Tidskriftsartikel (refereegranskat)abstract
- Carbapenem-resistant Enterobacterales (CRE) constitute an urgent threat to worldwide public health. The spread of CRE is facilitated by transmission via the environment. Wastewater treatment plants (WWTPs) are considered to be important sources of antibiotic resistance and hot spots of antibiotic-resistant bacteria (ARB) which can facilitate dissemination of antibiotic resistance genes. In this study, water samples were collected over one year from a WWTP in Jinan, Shandong province, China, from different functional sites in the wastewater treatment process. Carbapenem-resistant Escherichia coli (CREC) were isolated by selective cultivation and whole-genome sequenced to investigate the occurrence and characteristics of CREC in the WWTP. A total of 77 CREC isolates were included in the study and the detection rate of CREC in the WWTP water inlet was found to be 85%. An additional 10 CREC were isolated from a nearby teaching hospital during the sampling period and included for comparison to the environmental isolates. Susceptibility testing showed that all CREC were multidrug-resistant. 6 different carbapenem resistance genes (CRGs) were detected, including blaNDM-5 (n = 75), blaNDM-1 (n = 6), blaNDM-4 (n = 3), blaNDM-6 (n = 1), blaNDM-9 (n = 1), and blaKPC-2 (n = 4). 42 CREC isolates were whole-genome sequenced with Illumina short-read sequencing. 11 of these were also sequenced with Nanopore long-read sequencing. Plasmids carrying CRGs were found to belong to IncX3 (n = 35), IncFII (n = 12), IncFIA (n = 5), IncFIB (n = 2), IncC (n = 1), and IncP6 (n = 1). Clonal dissemination of CREC belonging to ST167, ST448, and ST746 was observed between different parts of the WWTP. Furthermore, isolates from the WWTP, including an isolate belonging to the high-risk ST167 strain, were found to be clonally related to CREC isolated at the hospital. The spread of CRGs is of considerable concern and strategies to prevent environmental dissemination of this contaminant urgently needs to be implemented.
|
|
| 13. |
- Zhou, Xuming, et al.
(författare)
-
Research on Gob-Side Entry Retaining Mining of Fully Mechanized Working Face in Steeply Inclined Coal Seam: A Case in Xinqiang Coal Mine
- 2022
-
Ingår i: Sustainability. - : MDPI. - 2071-1050. ; 14:16
-
Tidskriftsartikel (refereegranskat)abstract
- As a kind of non-coal pillar roadway support technique, gob-side entry retaining is of great significance to improve the production efficiency of a fully mechanized working face. However, the construction of the roadway is often subject to the surrounding rock conditions, the application is mainly concentrated in the nearly horizontal and gently inclined coal seam conditions, and the application in the steeply inclined coal seam conditions is relatively less. This paper is based on the gob-side entry retaining roadway construction of the 58# upper right 3# working face in the fifth district of Xinqiang Coal Mine, and describes the investigation in which we measured the advanced abutment stress, mining stress, and roof stress and analyzed the moving rule of roof. On this basis, in this work, we determined the filling parameters and process and investigated the filling effect from the perspective of the deformation of the filling body and the surrounding rock. The results show that the influence range of the advanced abutment stress in the working face is about 20~25 m, the stress in the upper part is intense, and stress in the middle and lower parts are relaxed. The setting load, the cycle-end resistance, and the time-weighted mean resistance at the upper end of working face along the direction of length are the largest, followed by the middle part, and the lower end is the minimum. When exploiting the steep inclined coal seam, the upper part of the working face is more active than the lower part, and the damaging range of overlaying strata is mainly in the upper part of the goaf. With this research, we established the filling mining process in steeply inclined coal seams and determined the relevant parameters. The gangue cement mortar filling can ensure the deformation of the filling body, the surrounding rock of the roadway is small in the process of roadway retention, and the stress of the filling body is also small, which ensure the successful retention of the roadway. This study verifies the possibility of repair-less exploitation and provides a reference for the popularization and application of the gob-side entry retaining technique in steep inclined coal seam.
|
|
| 14. |
- de Vries, Paul S., et al.
(författare)
-
Multiancestry Genome-Wide Association Study of Lipid Levels Incorporating Gene-Alcohol Interactions
- 2019
-
Ingår i: American Journal of Epidemiology. - : Oxford University Press. - 0002-9262 .- 1476-6256. ; 188:6, s. 1033-1054
-
Tidskriftsartikel (refereegranskat)abstract
- A person's lipid profile is influenced by genetic variants and alcohol consumption, but the contribution of interactions between these exposures has not been studied. We therefore incorporated gene-alcohol interactions into a multiancestry genome-wide association study of levels of high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, and triglycerides. We included 45 studies in stage 1 (genome-wide discovery) and 66 studies in stage 2 (focused follow-up), for a total of 394,584 individuals from 5 ancestry groups. Analyses covered the period July 2014-November 2017. Genetic main effects and interaction effects were jointly assessed by means of a 2-degrees-of-freedom (df) test, and a 1-df test was used to assess the interaction effects alone. Variants at 495 loci were at least suggestively associated (P < 1 x 10(-6)) with lipid levels in stage 1 and were evaluated in stage 2, followed by combined analyses of stage 1 and stage 2. In the combined analysis of stages 1 and 2, a total of 147 independent loci were associated with lipid levels at P < 5 x 10(-8) using 2-df tests, of which 18 were novel. No genome-wide-significant associations were found testing the interaction effect alone. The novel loci included several genes (proprotein convertase subtilisin/kexin type 5 (PCSK5), vascular endothelial growth factor B (VEGFB), and apolipoprotein B mRNA editing enzyme, catalytic polypeptide 1 (APOBEC1) complementation factor (A1CF)) that have a putative role in lipid metabolism on the basis of existing evidence from cellular and experimental models.
|
|
| 15. |
- Du, Y., et al.
(författare)
-
Clustering heat users based on consumption data
- 2019
-
Ingår i: Energy Procedia. - : Elsevier Ltd. - 1876-6102. ; , s. 3196-3201
-
Konferensbidrag (refereegranskat)abstract
- In today's district heating (DH) energy market, it is common to use user functional categories in price models to determine the heat price. However, users in the same category do not necessarily have the same energy consumption patterns, which potentially leads to unfair prices and many other practical issues. Taking into account heat usage characteristics, this work proposes two data-driven methods to cluster DH users to identify similar usage patterns, using practical energy consumption data. Efforts are focused on extracting representative features of users from their daily usage profiles and duration curves, respectively. Employing clustering based on these features, the resulting typical usage patterns and user category distributions are discussed. Our results can serve as potential inputs for future energy price models, demand-side management, and load reshaping strategies.
|
|
| 16. |
- Jiang, Jingjing, et al.
(författare)
-
Sino-European Differences in the Genetic Landscape and Clinical Presentation of Pheochromocytoma and Paraganglioma
- 2020
-
Ingår i: Journal of Clinical Endocrinology and Metabolism. - : The Endocrine Society. - 0021-972X .- 1945-7197. ; 105:10
-
Tidskriftsartikel (refereegranskat)abstract
- Context: Pheochromocytomas and paragangliomas (PPGLs) are characterized by distinct genotype-phenotype relationships according to studies largely restricted to Caucasian populations.Objective: To assess for possible differences in genetic landscapes and genotype-phenotype relationships of PPGLs in Chinese versus European populations.Design: Cross-sectional study.Setting: 2 tertiary-care centers in China and 9 in Europe.Participants: Patients with pathologically confirmed diagnosis of PPGL, including 719 Chinese and 919 Europeans.Main Outcome Measures: Next-generation sequencing performed in tumor specimens with mutations confirmed by Sanger sequencing and tested in peripheral blood if available. Frequencies of mutations were examined according to tumor location and catecholamine biochemical phenotypes.Results: Among all patients, higher frequencies of HRAS, FGFR1, and EPAS1 mutations were observed in Chinese than Europeans, whereas the reverse was observed for NF1, VHL, RET, and SDHx. Among patients with apparently sporadic PPGLs, the most frequently mutated genes in Chinese were HRAS (16.5% [13.6-19.3] vs 9.8% [7.6-12.1]) and FGFR1 (9.8% [7.6-12.11 vs 2.2% [1.1-3.3]), whereas among Europeans the most frequently mutated genes were NF1 (15.9% [13.2-18.6) vs 6.6% [4.7-8.5)) and SDHx (10.7% [8.4-13.0] vs 4.2% [2.6-5.7]). Among Europeans, almost all paragangliomas lacked appreciable production of epinephrine and identified gene mutations were largely restricted to those leading to stabilization of hypoxia inducible factors. In contrast, among Chinese there was a larger proportion of epinephrine-producing paragangliomas, mostly due to HRAS and FGFR1 mutations.Conclusions: This study establishes Sino-European differences in the genetic landscape and presentation of PPGLs, including ethnic differences in genotype-phenotype relationships indicating a paradigm shift in our understanding of the biology of these tumors.
|
|
| 17. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2013 challenge results
- 2013
-
Ingår i: 2013 IEEE INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE. - 9781479930227 ; , s. 98-111
-
Konferensbidrag (refereegranskat)abstract
- Visual tracking has attracted a significant attention in the last few decades. The recent surge in the number of publications on tracking-related problems have made it almost impossible to follow the developments in the field. One of the reasons is that there is a lack of commonly accepted annotated data-sets and standardized evaluation protocols that would allow objective comparison of different tracking methods. To address this issue, the Visual Object Tracking (VOT) workshop was organized in conjunction with ICCV2013. Researchers from academia as well as industry were invited to participate in the first VOT2013 challenge which aimed at single-object visual trackers that do not apply pre-learned models of object appearance (model-free). Presented here is the VOT2013 benchmark dataset for evaluation of single-object visual trackers as well as the results obtained by the trackers competing in the challenge. In contrast to related attempts in tracker benchmarking, the dataset is labeled per-frame by visual attributes that indicate occlusion, illumination change, motion change, size change and camera motion, offering a more systematic comparison of the trackers. Furthermore, we have designed an automated system for performing and evaluating the experiments. We present the evaluation protocol of the VOT2013 challenge and the results of a comparison of 27 trackers on the benchmark dataset. The dataset, the evaluation tools and the tracker rankings are publicly available from the challenge website(1).
|
|
| 18. |
- Li, Nan, et al.
(författare)
-
Study of the influence of the characteristics of loose residual coal on the spontaneous combustion of coal gob
- 2020
-
Ingår i: Energy Science & Engineering. - : John Wiley & Sons. - 2050-0505. ; 8:3, s. 689-701
-
Tidskriftsartikel (refereegranskat)abstract
- Mine fires are becoming a serious issue as the intensity of mining increases, especially in deep mines. Loose coal gob has a hidden ignition location and a high possibility of spontaneous combustion, which makes fire prevention difficult. Therefore, based on the theory of gas seepage and the characteristics of loose coal, a model of air leakage and spontaneous combustion in gob is established in this paper. Using working face #10414 in the Yangliu coal mine as an example, the relationship between the three spontaneous coal combustion (CSC) zones and the three stress zones is analyzed and verified by combining a FLAC3D simulation with field monitoring. In addition, the influence of advancing speed on the CSC is discussed, and suggestions for fire prevention are presented. The results show that the variation in the calorific value of the CSC with increasing degree of looseness of the residual coal in the gob forms an arch‐shape. There is a one‐to‐one relationship between the distribution of the three stress zones and the three CSC zones. In addition, as the advancing speed increases, the contact time between the loose coal body and the air decreases and the possibility of CSC decreases. This study provides a scientific basis for fire prevention and control in mines.
|
|
| 19. |
- Li, Zhijian, et al.
(författare)
-
Systematic exploration of essential yeast gene function with temperature-sensitive mutants.
- 2011
-
Ingår i: Nature biotechnology. - : Springer Science and Business Media LLC. - 1546-1696 .- 1087-0156. ; 29:4, s. 361-7
-
Tidskriftsartikel (refereegranskat)abstract
- Conditional temperature-sensitive (ts) mutations are valuable reagents for studying essential genes in the yeast Saccharomyces cerevisiae. We constructed 787 ts strains, covering 497 (∼45%) of the 1,101 essential yeast genes, with ∼30% of the genes represented by multiple alleles. All of the alleles are integrated into their native genomic locus in the S288C common reference strain and are linked to a kanMX selectable marker, allowing further genetic manipulation by synthetic genetic array (SGA)-based, high-throughput methods. We show two such manipulations: barcoding of 440 strains, which enables chemical-genetic suppression analysis, and the construction of arrays of strains carrying different fluorescent markers of subcellular structure, which enables quantitative analysis of phenotypes using high-content screening. Quantitative analysis of a GFP-tubulin marker identified roles for cohesin and condensin genes in spindle disassembly. This mutant collection should facilitate a wide range of systematic studies aimed at understanding the functions of essential genes.
|
|
| 20. |
- Zhou, Xuming, et al.
(författare)
-
Research on Theory and Technology of Floor Heave Control in Semicoal Rock Roadway: Taking Longhu Coal Mine in Qitaihe Mining Area as an Example
- 2022
-
Ingår i: Lithosphere. - : GeoScienceWorld. - 1941-8264 .- 1947-4253. ; 2022:Special 11
-
Tidskriftsartikel (refereegranskat)abstract
- As one of the most common disasters in deep mine roadway, floor heave has caused serious obstacles to mine transportation and normal production activities. The third section winch roadway in the third mining area of Qitaihe Longhu coal mine has a serious floor heave due to the large buried depths of the roadway and the semicoal rock roadway, and the maximum floor heave is 750 mm. For the problem of floor stability, this paper establishes a mechanical model to analyze the stability of roadway floor heave by analogy with the basement heave of deep foundation pit. It provides a model reference for analyzing the problem of roadway floor heave. Aiming at the problem of roadway floor heave in Longhu coal mine, the roadway model is established by using FLAC3D, and the roadway model after support is established according to the on-site support measures. Through the analysis of the distribution of roadway plastic area, stress nephogram, and displacement field simulation results, the results show that the maximum displacement of roadway roof and floor after support is reduced by 15% and 23%, but the maximum floor heave is still 770 mm, which is close to the measured floor heave of roadway. In order to solve the problem of roadway floor heave and integrate economic factors, this paper puts forward three support optimization schemes, simulates the support effect of each scheme, and finally determines that scheme 3 is the best support optimization scheme. Compared with that under the original support, the amount of floor heave is reduced by 81%, and the final amount of floor heave is 150 mm, which can meet the requirements of roadway floor deformation. The results provide a scheme and guidance for roadway support optimization
|
|
| 21. |
- An, Sining, 1991, et al.
(författare)
-
An 8 Gbps E-band QAM Transmitter Using Symbol-based Outphasing Power Combining Technique
- 2017
-
Ingår i: Radio-Frequency Integration Technology (RFIT2017). - 9781509040360 ; , s. 150-152
-
Konferensbidrag (refereegranskat)abstract
- In millimeter-wave communication systems, generating high output power with high efficiency on the transmitter side is one major challenge. In this paper, a symbol-based outphasing power combining solution has been demonstrated with data rate up to 8 Gbps at an RF frequency of 83.5 GHz. This solution provides 2 dB higher output power compared to the power of two QAM signals at 12% EVM.
|
|
| 22. |
- Benton, Jeanne, et al.
(författare)
-
Cells from the Immune System Generate Adult-Born Neurons in Crayfish
- 2014
-
Ingår i: Developmental Cell. - : Cell Press. - 1534-5807 .- 1878-1551. ; 30:3, s. 322-333
-
Tidskriftsartikel (refereegranskat)abstract
- Neurogenesis is an ongoing process in the brains of adult decapod crustaceans. However, the first-generation precursors that produce adult-born neurons, which reside in a neurogenic niche, are not self-renewing in crayfish and must be replenished. The source of these neuronal precursors is unknown. Here, we report that adult-born neurons in crayfish can be derived from hemocytes. Following adoptive transfer of 5-ethynyl-2′-deoxyuridine (EdU)-labeled hemocytes, labeled cells populate the neurogenic niche containing the first-generation neuronal precursors. Seven weeks after adoptive transfer, EdU-labeled cells are located in brain clusters 9 and 10 (where adult-born neurons differentiate) and express appropriate neurotransmitters. Moreover, the number of cells composing the neurogenic niche in crayfish is tightly correlated with total hemocyte counts (THCs) and can be manipulated by raising or lowering THC. These studies identify hemocytes as a source of adult-born neurons in crayfish and demonstrate that the immune system is a key contributor to adult neurogenesis.
|
|
| 23. |
- Cao, Rihong, et al.
(författare)
-
Failure mechanism of non-persistent jointed rock-like specimens under uniaxial loading : Laboratory testing
- 2020
-
Ingår i: International Journal of Rock Mechanics And Mining Sciences. - : Elsevier. - 1365-1609 .- 1873-4545. ; 132
-
Tidskriftsartikel (refereegranskat)abstract
- It is generally known that discontinuities have a remarkable influence on the mechanical behaviour of rock masses. To further understand the fracture mechanisms of jointed rock masses, substantial effort has been focused on the strength anisotropy and failure characteristics of rocks/rock-like specimens containing persistent joints with different geometric parameters. However, only a few laboratory tests have considered the failure mechanism of a rock mass with 3D joints, especially for non-persistent joints with different persistence levels. In the present work, experiments on cubic rock-like specimens containing non-persistent joints (in areal extent) subjected to uniaxial compression were conducted to further investigate the influence of the joint inclination (θ) and persistence (N) on the rock mechanical properties and failure characteristics. The strength of a 3D non-persistent jointed specimen is characterized by three stages as the joint inclination angle (θ) increases from 0° to 90°. The strength of jointed specimens decreases with increasing N for all θ values, with the highest strength obtained for N = 0.42 and the lowest strength recorded for N = 0.92. Based on CT scan results, four typical fracture modes were identified: splitting, splitting + sliding, sliding, and intact failure. Overall, as the joint inclination increases, the failure mode of the specimen transforms from splitting to sliding and then to the intact failure mode. However, with decreasing joint persistence, the failure modes of some specimens will change from sliding to mixed failure (splitting + sliding).
|
|
| 24. |
- Cao, Ri-hong, et al.
(författare)
-
Failure and Mechanical Behavior of Transversely Isotropic Rock under Compression-Shear Tests : Laboratory Testing and Numerical Simulation
- 2021
-
Ingår i: Engineering Fracture Mechanics. - : Elsevier. - 0013-7944 .- 1873-7315. ; 241
-
Tidskriftsartikel (refereegranskat)abstract
- The failure and mechanical behavior of transversely isotropic rock are significantly affected by the original bedding planes. Until now, few studies have been performed to investigate the influence of the geometrical and mechanical parameters of the bedding planes on the fracture characteristics of transversely isotropic rocks under planar shear fracture loading conditions. For this purpose, experimental and numerical compression-shear tests on double-notched specimens are conducted to investigate the fracturing characteristics of transversely isotropic rock under planar shear fracture loading. The experimental study that focuses on the influence of bedding plane inclination on fracture load, fracture pattern and AE evolution, and six inclination angles is conducted in this study. Based on the flat joint contact model (for the rock matrix) and smooth joint contact model (for the original bedding plane) in PFC2D (particle flow code), the microscale fracturing process of transversely isotropic rock with different inclinations is simulated and analyzed. The results show that the inclination has an important influence on the fracture load and fracture pattern, and the maximum and minimum fracture loads are obtained for specimens with inclination angles of 30° and 60°, respectively. Moreover, the strength and spacing of the original bedding planes also play an important role in fracture loads. Higher bedding plane strength and wider bedding plane spacing result in higher fracture loads. In addition, with a moderate inclination angle, transversely isotropic rock with higher bedding plane strength tends to form cracks that cut through the rock matrix. However, with the decrease in the bedding plane strength, more fractures form along the bedding planes.
|
|
| 25. |
- Chen, Jingjing, 1982, et al.
(författare)
-
10 Gbps 16QAM transmission over a 70/80 GHz (E-band) radio test-bed
- 2012
-
Ingår i: European Microwave Week 2012: "Space for Microwaves", EuMW 2012, Conference Proceedings - 7th European Microwave Integrated Circuits Conference, EuMIC 2012. - : IEEE. - 9782874870286 - 9781467323024 - 9782874870262 ; , s. 556-559
-
Konferensbidrag (refereegranskat)abstract
- A millimeter-wave radio test-bed is implemented which demonstrates 16QAM transmission over 70/80 GHz band for data rate up to 10 Gbps. Performance of the 16QAM transmitter and receiver is evaluated in a loop-back lab set-up. With the proposed 10 Gbps on single carrier system architecture, it is possible to achieve 40 Gbps over a 5 GHz bandwidth when combined with polarization and spatial multiplexing.
|
|
