| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
- Zhang, Huai, et al.
(författare)
-
A global survey on the use of the international classification of diseases codes for metabolic dysfunction-associated fatty liver disease.
- 2024
-
Ingår i: Hepatology international. - 1936-0541.
-
Tidskriftsartikel (refereegranskat)abstract
- With the implementation of the 11th edition of the International Classification of Diseases (ICD-11) and the publication of the metabolic dysfunction-associated fatty liver disease (MAFLD) nomenclature in 2020, it is important to establish consensus for the coding of MAFLD in ICD-11. This will inform subsequent revisions of ICD-11.Using the Qualtrics XM and WJX platforms, questionnaires were sent online to MAFLD-ICD-11 coding collaborators, authors of papers, and relevant association members.A total of 890 international experts in various fields from 61 countries responded to the survey. We also achieved full coverage of provincial-level administrative regions in China. 77.1% of respondents agreed that MAFLD should be represented in ICD-11 by updating NAFLD, with no significant regional differences (77.3% in Asia and 76.6% in non-Asia, p=0.819). Over 80% of respondents agreed or somewhat agreed with the need to assign specific codes for progressive stages of MAFLD (i.e. steatohepatitis) (92.2%), MAFLD combined with comorbidities (84.1%), or MAFLD subtypes (i.e., lean, overweight/obese, and diabetic) (86.1%).This global survey by a collaborative panel of clinical, coding, health management and policy experts, indicates agreement that MAFLD should be coded in ICD-11. The data serves as a foundation for corresponding adjustments in the ICD-11 revision.
|
|
| 3. |
- Zhang, Li, et al.
(författare)
-
Characterization of anti-BCG benz[α]anthraquinones and new siderophores from a Xinjiang desert-isolated rare actinomycete Nocardia sp. XJ31
- 2020
-
Ingår i: Applied Microbiology and Biotechnology. - : Springer Science and Business Media LLC. - 0175-7598 .- 1432-0614. ; 104:19, s. 8267-8278
-
Tidskriftsartikel (refereegranskat)abstract
- The current global demand for novel anti-TB drugs has drawn urgent attention on the discovery of natural product compounds with anti-TB activity. Lots of efforts have emphasized on environmental samples from unexplored or underexplored natural habits and identified numerous rare actinomycete taxa producing structurally diverse bioactive natural products. Herein, we report a survey of the rare actinobacteria diversity in Xinjiang region together with the discovery of anti-TB active natural products from these strains. We have collected 17 soil samples at different sites with different environmental conditions, from which 39 rare actinobacteria were identified by using a selective isolation strategy with 5 media variations. Among those isolated strains, XJ31 was identified as a new Nocardia sp. based on 16S rRNA gene analysis. Through one strain-many compounds (OSMAC) strategy combined with anti-Bacillus Calmette-Guérin bioassay-guided isolation, two groups of compounds were identified. They were twelve siderophores (nocardimicins, 1-12) and two anthraquinones (brasiliquinones, 13 and 14) and ten of them were identified as new compounds. The structures of the purified compounds were elucidated using HR-ESI-MS, 1D NMR, and 2D NMR techniques. The anti-TB bioassays revealed that the two benz[α]anthraquinones have potent activity against BCG (MICs = 25 μM), which can be used as a promising start point for further anti-TB drug development.
|
|
| 4. |
- Long, Chang, et al.
(författare)
-
Regulating reconstruction of oxide-derived Cu for electrochemical CO2 reduction toward n-propanol
- 2023
-
Ingår i: Science Advances. - 2375-2548. ; 9:43
-
Tidskriftsartikel (refereegranskat)abstract
- Oxide-derived copper (OD-Cu) is the most efficient and likely practical electrocatalyst for CO2 reduction toward multicarbon products. However, the inevitable but poorly understood reconstruction from the pristine state to the working state of OD-Cu under strong reduction conditions largely hinders the rational construction of catalysts toward multicarbon products, especially C-3 products like n-propanol. Here, we simulate the reconstruction of CuO and Cu2O into their derived Cu by molecular dynamics, revealing that CuO-derived Cu (CuOD-Cu) intrinsically has a richer population of undercoordinated Cu sites and higher surficial Cu atom density than the counterpart Cu2O-derived Cu (Cu2OD-Cu) because of the vigorous oxygen removal. In situ spectroscopes disclose that the coordination number of CuOD-Cu is considerably lower than that of Cu2OD-Cu, enabling the fast kinetics of CO2 reaction and strengthened binding of *C-2 intermediate(s). Benefiting from the rich undercoordinated Cu sites, CuOD-Cu achieves remarkable n-propanol faradaic efficiency up to similar to 17.9%, whereas the Cu2OD-Cu dominantly generates formate.
|
|
| 5. |
- Su, Changqing, et al.
(författare)
-
Gene-Viral Cancer Therapy Using Dual-Regulated Oncolytic Adenovirus with Antiangiogenesis Gene for Increased Efficacy.
- 2008
-
Ingår i: Molecular Cancer Research. - 1557-3125. ; 6, s. 568-575
-
Tidskriftsartikel (refereegranskat)abstract
- Conditionally replicative adenovirus (CRAD) represents a promising approach for cancer therapy. Several CRADs controlled by the human telomerase reverse transcriptase promoter have been developed. However, because of their replicative capacity, the importance of cancer specificity for CRADs needs to be further emphasized. In this study, we have developed a novel dual-regulated CRAD, CNHK500-mE, which has its E1a and E1b gene controlled by the human telomerase reverse transcriptase promoter and the hypoxia response element, respectively. It also carries a mouse endostatin expression cassette controlled by the cytomegalovirus promoter. These properties allow for increased cancer cell targeting specificity and decreased adverse side effects. We showed that CNHK500-mE preferentially replicated in cancer cells. Compared with a replication-defective vector carrying the same endostatin expression cassette, CNHK500-mE-mediated transgene expression level was markedly increased via viral replication within cancer cells. In the nasopharyngeal tumor xenograft model, CNHK500-mE injection resulted in antitumor efficacy at day 7 after therapy. Three weeks later, it led to significant inhibition of xenograft tumor growth due to the combined effects of viral oncolytic therapy and antiangiogenesis gene therapy. Pathologic examination showed that most cancer cells were positive for adenoviral capsid protein and for apoptotic terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling in the CNHK500-mE-treated tumor tissues, and the microvessels in these tumor tissues were diminished in quantity and abnormal in morphology. These results suggest that, as a potential cancer therapeutic agent, the CNHK500-mE is endowed with higher specificity to cancer cells and low cytotoxicity to normal cells. (Mol Cancer Res 2008;6(4):OF1-8).
|
|
| 6. |
- Cai, Jing, et al.
(författare)
-
Influence of organic aerosol molecular composition on particle absorptive properties in autumn Beijing
- 2022
-
Ingår i: Atmospheric Chemistry And Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 22:2, s. 1251-1269
-
Tidskriftsartikel (refereegranskat)abstract
- Organic aerosol (OA) is a major component of fine particulate matter (PM), affecting air quality, human health, and the climate. The absorptive and reflective behavior of OA components contributes to determining particle optical properties and thus their effects on the radiative budget of the troposphere. There is limited knowledge on the influence of the molecular composition of OA on particle optical properties in the polluted urban environment. In this study, we characterized the molecular composition of oxygenated OA collected on filter samples in the autumn of 2018 in Beijing, China, with a filter inlet for gases and aerosols coupled to a high-resolution time-of-flight chemical ionization mass spectrometer (FIGAERO–CIMS). Three haze episodes occurred during our sampling period with daily maximum concentrations of OA of 50, 30, and 55 µg m−3. We found that the signal intensities of dicarboxylic acids and sulfur-containing compounds increased during the two more intense haze episodes, while the relative contributions of wood-burning markers and other aromatic compounds were enhanced during the cleaner periods. We further assessed the optical properties of oxygenated OA components by combining detailed chemical composition measurements with collocated particle light absorption measurements. We show that light absorption enhancement (Eabs) of black carbon (BC) was mostly related to more oxygenated OA (e.g., dicarboxylic acids), likely formed in aqueous-phase reactions during the intense haze periods with higher relative humidity, and speculate that they might contribute to lensing effects. Aromatics and nitro-aromatics (e.g., nitrocatechol and its derivatives) were mostly related to a high light absorption coefficient (babs) consistent with light-absorbing (brown) carbon (BrC). Our results provide information on oxygenated OA components at the molecular level associated with BrC and BC particle light absorption and can serve as a basis for further studies on the effects of anthropogenic OA on radiative forcing in the urban environment.
|
|
| 7. |
- Cai, Jing, et al.
(författare)
-
Influence of organic aerosol molecular composition on particle absorptive properties in autumn Beijing
- 2022
-
Ingår i: Atmospheric Chemistry and Physics. - 1680-7316 .- 1680-7324. ; 22, s. 1251-1269
-
Tidskriftsartikel (refereegranskat)abstract
- Organic aerosol (OA) is a major component of fine particulate matter (PM), affecting air quality, human health, and the climate. The absorptive and reflective behavior of OA components contributes to determining particle optical properties and thus their effects on the radiative budget of the troposphere. There is limited knowledge on the influence of the molecular composition of OA on particle optical properties in the polluted urban environment. In this study, we characterized the molecular composition of oxygenated OA collected on filter samples in the autumn of 2018 in Beijing, China, with a filter inlet for gases and aerosols coupled to a high-resolution time-of-flight chemical ionization mass spectrometer (FIGAERO-CIMS). Three haze episodes occurred during our sampling period with daily maximum concentrations of OA of 50, 30, and 55 μg m-3. We found that the signal intensities of dicarboxylic acids and sulfur-containing compounds increased during the two more intense haze episodes, while the relative contributions of wood-burning markers and other aromatic compounds were enhanced during the cleaner periods. We further assessed the optical properties of oxygenated OA components by combining detailed chemical composition measurements with collocated particle light absorption measurements. We show that light absorption enhancement (Eabs) of black carbon (BC) was mostly related to more oxygenated OA (e.g., dicarboxylic acids), likely formed in aqueous-phase reactions during the intense haze periods with higher relative humidity, and speculate that they might contribute to lensing effects. Aromatics and nitro-aromatics (e.g., nitrocatechol and its derivatives) were mostly related to a high light absorption coefficient (babs) consistent with light-absorbing (brown) carbon (BrC). Our results provide information on oxygenated OA components at the molecular level associated with BrC and BC particle light absorption and can serve as a basis for further studies on the effects of anthropogenic OA on radiative forcing in the urban environment. Copyright:
|
|
| 8. |
- Cai, Jing, et al.
(författare)
-
Size-segregated particle number and mass concentrations from different emission sources in urban Beijing
- 2020
-
Ingår i: Atmospheric Chemistry And Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 20:21, s. 12721-12740
-
Tidskriftsartikel (refereegranskat)abstract
- Although secondary particulate matter is reported to be the main contributor of PM2.5 during haze in Chinese megacities, primary particle emissions also affect particle concentrations. In order to improve estimates of the contribution of primary sources to the particle number and mass concentrations, we performed source apportionment analyses using both chemical fingerprints and particle size distributions measured at the same site in urban Beijing from April to July 2018. Both methods resolved factors related to primary emissions, including vehicular emissions and cooking emissions, which together make up 76% and 24% of total particle number and organic aerosol (OA) mass, respectively. Similar source types, including particles related to vehicular emissions (1.6 +/- 1.1 mu gm(-3); 2.4 +/- 1.8 x 10(3) cm(-3) and 5.5 +/- 2.8 x 10(3) cm(-3) for two traffic-related components), cooking emissions (2.6 +/- 1.9 mu gm(-3) and 5.5 +/- 3.3 x 10(3) cm(-3)) and secondary aerosols (51 +/- 41 mu gm(-3) and 4.2 +/- 3.0 x 10(3) cm(-3)), were resolved by both methods. Converted mass concentrations from particle size distributions components were comparable with those from chemical fingerprints. Size distribution source apportionment separated vehicular emissions into a component with a mode diameter of 20 nm (traffic-ultrafine) and a component with a mode diameter of 100 nm (traffic-fine). Consistent with similar day- and nighttime diesel vehicle PM2.5 emissions estimated for the Beijing area, traffic-fine particles, hydrocarbon-like OA (HOA, traffic-related factor resulting from source apportionment using chemical fingerprints) and black carbon (BC) showed similar diurnal patterns, with higher concentrations during the night and morning than during the afternoon when the boundary layer is higher. Traffic-ultrafine particles showed the highest concentrations during the rush-hour period, suggesting a prominent role of local gasoline vehicle emissions. In the absence of new particle formation, our re-sults show that vehicular-related emissions (14% and 30% for ultrafine and fine particles, respectively) and cooking-activity-related emissions (32 %) dominate the particle number concentration, while secondary particulate matter (over 80 %) governs PM2.5 mass during the non-heating season in Beijing.
|
|
| 9. |
|
|
| 10. |
- Chen, Dongfeng, et al.
(författare)
-
Glioma Cell Proliferation Controlled by ERK Activity-Dependent Surface Expression of PDGFRA.
- 2014
-
Ingår i: PLoS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 9:1
-
Tidskriftsartikel (refereegranskat)abstract
- Increased PDGFRA signaling is an essential pathogenic factor in many subtypes of gliomas. In this context the cell surface expression of PDGFRA is an important determinant of ligand sensing in the glioma microenvironment. However, the regulation of spatial distribution of PDGFRA in glioma cells remains poorly characterized. Here, we report that cell surface PDGFRA expression in gliomas is negatively regulated by an ERK-dependent mechanism, resulting in reduced proliferation of glioma cells. Glioma tumor tissues and their corresponding cell lines were isolated from 14 patients and analyzed by single-cell imaging and flow cytometry. In both cell lines and their corresponding tumor samples, glioma cell proliferation correlated with the extent of surface expression of PDGFRA. High levels of surface PDGFRA also correlated to high tubulin expression in glioma tumor tissue in vivo. In glioma cell lines, surface PDGFRA declined following treatment with inhibitors of tubulin, actin and dynamin. Screening of a panel of small molecule compounds identified the MEK inhibitor U0126 as a potent inhibitor of surface PDGFRA expression. Importantly, U0126 inhibited surface expression in a reversible, dose- and time-dependent manner, without affecting general PDGFRA expression. Treatment with U0126 resulted in reduced co-localization between PDGFRA and intracellular trafficking molecules e.g. clathrin, RAB11 and early endosomal antigen-1, in parallel with enhanced co-localization between PDGFRA and the Golgi cisternae maker, Giantin, suggesting a deviation of PDGFRA from the endosomal trafficking and recycling compartment, to the Golgi network. Furthermore, U0126 treatment in glioma cells induced an initial inhibition of ERK1/2 phosphorylation, followed by up-regulated ERK1/2 phosphorylation concomitant with diminished surface expression of PDGFRA. Finally, down-regulation of surface PDGFRA expression by U0126 is concordant with reduced glioma cell proliferation. These findings suggest that manipulation of spatial expression of PDGFRA can potentially be used to combat gliomas.
|
|
| 11. |
- Fan, Yi, et al.
(författare)
-
Computational Fluid Dynamics for Effects of Coolants on On-chip Cooling Capability with Carbon Nanotube Micro-fin Architectures
- 2009
-
Ingår i: Microsystem Technologies. - : Springer Science and Business Media LLC. - 0946-7076 .- 1432-1858. ; 15:3, s. 375-381
-
Tidskriftsartikel (refereegranskat)abstract
- Carbon nanotubes (CNTs) have shown a broad promising application in high mechanical strength and electronic structure. In this work, the effects of coolants on heat transfer capability of on-chip cooling with CNTs Micro-fin Architectures was studied, and the two-dimensional computational fluid dynamics (CFD) simulations have been done for a series of material parameters of coolants in this paper. The influences of thermal conductivity, density, specific heat and viscosity on cooling have been obtained in the case studies. The results demonstrate that pressure drop between the inlet and outlet of the cooling device is dependent on coolant's density and viscosity. Consequently, it will be necessary to find out a good balance between heat transfer capability and pressure drop. The simulation results also indicate that the heat sink capability will be better if there are more fin rows in the microchannel.
|
|
| 12. |
|
|
| 13. |
- Han, Ning, et al.
(författare)
-
Achieving Efficient Electrocatalytic Oxygen Evolution in Acidic Media on Yttrium Ruthenate Pyrochlore through Cobalt Incorporation
- 2023
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-301X .- 1616-3028. ; 33:20
-
Tidskriftsartikel (refereegranskat)abstract
- The development of electrocatalysts for the oxygen evolution reaction (OER) especially in acidic media remains the major challenge that still requires significant advances, both in material design and mechanistic exploration. In this study, the incorporation of cobalt in Y2-xCoxRu2O7−δ results in an ultrahigh OER activity because of the charge redistribution at eg orbitals between Ru and Co atoms. The Y1.75Co0.25Ru2O7−δ electrocatalyst exhibits an extremely small overpotential of 275 mV in 0.5 m H2SO4 at the current density of 10 mA cm−2, which is smaller than that of parent Y2Ru2O7−δ (360 mV) and commercial RuO2 (286 mV) catalysts. The systematic investigation of the composition related to OER activity shows that the Co substitution will also bring other effective changes, such as reducing the bandgap, and creating oxygen vacancies, which result in fast OER charge transfer. Meanwhile, the strengthening of the bond hybridization between the d orbitals of metal (Y and Ru) and the 2p orbitals of O will intrinsically enhance the chemical stability. Finally, theoretical calculations indicate that cobalt substitution reduces the theoretical overpotential both through an adsorbate evolution mechanism and a lattice oxygen-mediated mechanism.
|
|
| 14. |
- Hao, Zifan, et al.
(författare)
-
High-performance eight-channel system with fractal superconducting nanowire single-photon detectors
- 2024
-
Ingår i: Chip. - : Elsevier B.V.. - 2709-4723 .- 2772-2724. ; 3:2
-
Tidskriftsartikel (refereegranskat)abstract
- Superconducting nanowire single-photon detectors (SNSPDs) have become a mainstream photon-counting technology that has been widely applied in various scenarios. So far, most multi-channel SNSPD systems, either reported in literature or commercially available, are polarization sensitive, that is, the system detection efficiency (SDE) of each channel is dependent on the state of polarization of the to-be-detected photons. Here, we reported an eight-channel system with fractal SNSPDs working in the wavelength range of 930 to 940 nm, which are all featured with low polarization sensitivity. In a close-cycled Gifford-McMahon cryocooler system with the base temperature of 2.2 K, we installed and compared the performance of two types of devices: (1) SNSPD, composed of a single, continuous nanowire and (2) superconducting nanowire avalanche photodetector (SNAP), composed of 16 cascaded units of two nanowires electrically connected in parallel. The highest SDE among the eight channels reaches 96−5+4%, with the polarization sensitivity of 1.02 and a dark-count rate of 13 counts per second. The average SDE for eight channels for all states of polarization is estimated to be 90 ± 5%. It is concluded that both the SNSPDs and the SNAPs can reach saturated, high SDE at the wavelength of interest, and the SNSPDs show lower dark-count (false-count) rates, whereas the SNAPs show better properties in the time domain. With the adoption of this system, we showcased the measurements of the second-order photon-correlation functions of light emission from a single-photon source based on a semiconductor quantum dot and from a pulsed laser. It is believed that this work will provide new choices of systems with single-photon detectors combining the merits of high SDE, low polarization sensitivity, and low noise that can be tailored for different applications.
|
|
| 15. |
- Hu, Xiaolong, et al.
(författare)
-
Timing properties of superconducting nanowire single-photon detectors
- 2019
-
Ingår i: Quantum Optics and Photon Counting 2019. - : SPIE - International Society for Optical Engineering. - 9781510627215
-
Konferensbidrag (refereegranskat)abstract
- In this paper, we review theoretical and experimental research progress on timing properties of superconducting nanowire single-photon detectors, including six possible mechanisms that induce timing jitter and experiments towards ultra-low timing jitter.
|
|
| 16. |
- Li, Xiaolong, 1991, et al.
(författare)
-
Solid solution softening at room temperature and hardening at elevated temperatures: a case by minor Mn addition in a (HfNbTi) 85 Mo 15 refractory high entropy alloy
- 2023
-
Ingår i: Materials Research Express. - 2053-1591. ; 10:11
-
Tidskriftsartikel (refereegranskat)abstract
- To address the conflict between room-temperature (RT) ductility and high-temperature (HT) strength in single phase bcc-structured refractory high entropy alloys, here we propose to use minor alloying to achieve solid solution softening at RT and simultaneously, solid solution hardening at HT. Our strategy was manifested by minor Mn additions in a RT brittle (HfNbTi)85Mo15 refractory high entropy alloy, where nominal Mn additions ranging from 2 at. % down to 0.03 at. % were seen to soften the base (HfNbTi)85Mo15 alloy at RT, while to harden the base alloy at the temperature range from 400 to 800 °C. The yield stress in all studied alloys showed a three-stage pattern, characterized by a temperature dependent stage at temperatures below 400 °C, followed by a temperature independent stage at intermediate temperatures ranging from 400 to 800 °C, and finally another temperature dependent stage at temperatures higher than 800 °C. The mechanisms for solid solution softening and solid solution hardening in single phase bcc-structured refractory high entropy alloys were discussed, together with their temperature dependence.
|
|
| 17. |
- Li, ZongYi, et al.
(författare)
-
Toward a stem cell gene therapy for breast cancer
- 2009
-
Ingår i: Blood. - : American Society of Hematology. - 1528-0020 .- 0006-4971. ; 113:22, s. 5423-5433
-
Tidskriftsartikel (refereegranskat)abstract
- Current approaches for treatment of late-stage breast cancer rarely result in a long-term cure. In part this is due to tumor stroma that prevents access of systemically or intratumorally applied therapeutics. We propose a stem cell gene therapy approach for controlled tumor stroma degradation that uses the pathophysiologic process of recruitment of inflammatory cells into the tumor. This approach involves genetic modification of hematopoietic stem cells (HSCs) and their subsequent transplantation into tumor-bearing mice. We show that inducible, intratumoral expression of relaxin (Rlx) either by transplanting tumor cells that contained the Rlx gene or by transplantation of mouse HSCs transduced with an Rlx-expressing lentivirus vector delays tumor growth in a mouse model of breast cancer. The antitumor effect of Rlx was mediated through degradation of tumor stroma, which provided increased access of infiltrating antitumor immune cells to their target tumor cells. Furthermore, we have shown in a human/mouse chimeric model that genetically modified HSCs expressing a transgene can access the tumor site. Our findings are relevant for cancer gene therapy and immunotherapy. (Blood. 2009; 113: 5423-5433)
|
|
| 18. |
- Lin, Qing-Fang, et al.
(författare)
-
A stable aluminosilicate zeolite with intersecting three-dimensional extra-large pores
- 2021
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 374:6575, s. 1605-1608
-
Tidskriftsartikel (refereegranskat)abstract
- Zeolites are crystalline porous materials with important industrial applications, including uses in catalytic and adsorption-separation processes. Access into and out of their inner confined space, where adsorption and reactions occur, is limited by their pore apertures. Stable multidimensional zeolites with larger pores able to process larger molecules are in demand in the fine chemical industry and for the oil processing on which the world still relies for fuels. Currently known extra-large-pore zeolites display poor stability and/or lack pore multidimensionality, limiting their usefulness. We report ZEO-1, a robust, fully connected aluminosilicate zeolite with mutually intersecting three-dimensional extra-large plus three-dimensional large pores. ZEO-1 is stable up to 1000 degrees C, has an extraordinary specific surface area (1000 square meters per gram), and shows potential as a catalytic cracking catalyst.
|
|
| 19. |
- Liu, Alei, et al.
(författare)
-
Manipulate Micrometer Surface and Nanometer Bulk Phase Separation Structures in the Active Layer of Organic Solar Cells via Synergy of Ultrasonic and High-Pressure Gas Spraying
- 2019
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 11:11, s. 10777-10784
-
Tidskriftsartikel (refereegranskat)abstract
- For organic solar cells, the vertical and lateral micro-/nanometer-scale structure in the active layer largely determines the device performance. In this work, the surface and bulk domain size of the photoactive layer are successfully manipulated with a facile two-step spraying method, that is, an ultrathin active layer by high-pressure spraying is deliberately stacked on top of the thick active layer by ultrasonic spraying. Thus, the morphology is effectively optimized with the comprehensive study of optical and electrical characteristics, such as photon absorption, exciton dissociation efficiency, and bimolecular recombination. Moreover, the novel method can be used not only in the fullerene system but also in the nonfullerene system, demonstrating the remarkable universality through this synergy method. This work provides an easy and reliable strategy to improve photovoltaic device performance in the industrial large-area spray-coating process.
|
|
| 20. |
- Liu, Bokai, et al.
(författare)
-
Al-DeMat: A web-based expert system platform for computationally expensive models in materials design
- 2023
-
Ingår i: Advances in Engineering Software. - : Elsevier. - 0965-9978 .- 1873-5339. ; 176
-
Tidskriftsartikel (refereegranskat)abstract
- We present a web-based framework based on the R shiny package with functional back-end server in machine learning methods. A 4-tiers architecture is programmed to achieve users’ interactive design and visualization via a web browser. Many data-driven methods are integrated into this framework, namely Random Forest, Gradient Boosting Machine, Artificial and Deep neural networks. Moreover, a robust gradient-free optimization technique, the Particle Swarm Optimization, is used to search optimal values in hyper-parameters tuning. K-fold Cross Validation is applied to avoid over-fitting. R2 and RMSE are considered as two key factors to evaluate the trained models. The contributions to the expert system in materials design are: (1) A systematic framework that can be applied in materials prediction with machine learning approaches, (2) A user-friendly web-based platform that is easy and flexible to use and (3) integrated optimization and visualization into the framework with pre set algorithms. This computational framework is designed for researchers and materials engineers who would like to do the preliminary designs before experimental studies. Finally, we demonstrate the performance of the web-based framework through 2 case studies.
|
|
| 21. |
- Liu, Daosheng, et al.
(författare)
-
Investigation on heating aging mechanism of cellulose paper for oil-immersed transformer main insulation
- 2019
-
Ingår i: Proceedings - IEEE International Conference on Dielectric Liquids. - 2153-3733 .- 2153-3725. ; 2019-June:June
-
Konferensbidrag (refereegranskat)abstract
- Power transformer plays a vital role in maintaining reliable and efficient electricity supply. However, in service is increasing and growing older, much and much attention has been paid on their aging condition and life assessment than ever. The aging and degradation of transformer insulation will determine the life-time of its operation. The intensities of these depend on mechanical, thermal and environmental stresses that act on the insulations. Due to the temperature rise, the lifetime of insulation material will be shortened. The accelerated thermal aging method is often adopted to do some evaluation on the oil-paper insulation materials under different temperature for the thermal lifetime model. According to existing aging test, both insulation paper and mineral oil were aged at the same temperature. In this paper, the thermal aging experiments were implemented on the transformer main insulation model made with modified and unmodified insulation paper. The accelerated thermal aging tests were finished, and the superior electric characteristics of the nano-TiO2 and cellulose composition insulation were validated.
|
|
| 22. |
- Liu, Daosheng, et al.
(författare)
-
Suppression Mechanism of TiO 2 for the Partial Discharge of Oil-paper Insulation in Intensive Electric Field
- 2019
-
Ingår i: Proceedings - IEEE International Conference on Dielectric Liquids. - 2153-3733 .- 2153-3725. ; 2019-June
-
Konferensbidrag (refereegranskat)abstract
- With the rapid development of modern HVDC transmission technology, higher insulation properties are put forward on the oil-paper insulation system of the transformer, which determine the transformer service life to a certain extent. Traditional transformer oil-paper insulation is becoming increasingly difficult to meet the demands of insulation system with large capacity and miniaturization at ultra-high voltage level. In order to improve the insulation strength of oil-paper system, the insulation cellulose paper modified by TiO2 nanoparticles of different diameters (5 nm, 10 nm, 20 nm, 30 nm) were prepared, in addition, each of modified cellulose paper has different mass fraction of TiO2 nanoparticles (1%, 3%, 5%, 7% wt.). The partial discharge (PD) detection platform was established, and the partial discharge inception voltage (PDIV) values of the oil-paper insulation system with and without nanoparticles were measured. To investigate the PD characteristics, the PD waveforms and PD frequency spectrums of modified cellulose paper and the unmodified were obtained. The suppression mechanism of TiO2 nanoparticles on PD was explored through scanning electron microscope (SEM) observation. All the experiment results indicate that adding nano-TiO2 is beneficial to enhance the insulation properties of oil-paper insulation, and the optimum diameter and mass fraction of TiO2 nanoparticles to suppress oil-paper PD were obtained.
|
|
| 23. |
- Liu, Lei, et al.
(författare)
-
Irreversible phase transitions of the multiferroic oxide Mn3TeO6 at high pressures
- 2022
-
Ingår i: Applied Physics Letters. - : American Institute of Physics (AIP). - 0003-6951 .- 1077-3118. ; 121:4
-
Tidskriftsartikel (refereegranskat)abstract
- Due to their large bandgaps, multiferroic oxides, the promising candidates for overcoming the disadvantages of metal-halide perovskites as light absorbers, have so far very limited use in solar cell applications. Previous investigations demonstrate that high pressure represents an efficient tool for tuning the bandgap of multiferroic Mn3TeO6 (MTO). However, the underlying mechanism of the giant bandgap reduction discovered in MTO remains unclear, which critically prevents the design of next-generation light absorbers. In this study, we performed in situ x-ray diffraction analyses on the structure evolution of MTO upon compression and decompression, discovering a sequence of irreversible phase transitions R(3)over bar -> C2/c -> P2(1)/n. The experimental results, supported by electronic structure calculations, show the shortening of Mn-O-Mn bonding, and, to a lower extent, the decrease in connectivity of octahedra across the phase transition, explain the giant bandgap reduction of MTO. These findings will facilitate the design and synthesis of next-generation light absorbers in solar cells.
|
|
| 24. |
- Liu, Yanling, et al.
(författare)
-
A capacitive DNA sensor-based test for simple and sensitive analysis of antibiotic resistance in field setting.
- 2015
-
Ingår i: Biosensors & Bioelectronics. - : Elsevier BV. - 1873-4235 .- 0956-5663. ; 64, s. 255-259
-
Tidskriftsartikel (refereegranskat)abstract
- To meet urgent needs for solving serious worldwide drug-resistance problems, a sensitive label-free capacitive sensor developed in our group was investigated as a tool to be applied in the field of antibiotic resistance genotyping, for instance the detection of ampicillin resistance gene (ampR). Proof-of-concept data demonstrated its detection sensitivity of pico-molar without any signal amplification step and a dynamic range of at least three orders of magnitude. The detection limits of less than 1pM for the single-stranded ampR oligonucleotide and 4pM for the double-stranded target can reliably be achieved after only 2.5min sample reaction. Reusability of the probe-functionalized disposable electrode was investigated by comparing different regeneration solutions; mix of 25mM NaOH/30% formamide was employed to regenerate the electrode for at least six cycles without significant loss of sensing ability. Assay is performed automatically and result is retrieved in 20min. The developed sensitive genotyping tool is expected to provide simple, fast and affordable screening for monitoring spread of antibiotic resistances, which is suitable for testing in field setting.
|
|
| 25. |
- Niu, Bin, et al.
(författare)
-
Topology optimization of compliant mechanisms considering strain variance
- 2020
-
Ingår i: Structural and multidisciplinary optimization (Print). - : Springer Science and Business Media LLC. - 1615-147X .- 1615-1488. ; 62, s. 1457-1471
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, compliant mechanisms are designed by using multi-objective topology optimization, where maximization of the output displacement and minimization of the strain are considered simultaneously. To quantify the strain, we consider typical measures of strain, which are based on the p-norm, and a new class of strain quantifying functions, which are based on the variance of the strain. The topology optimization problem is formulated using the Solid Isotropic Material with Penalization (SIMP) method, and the sensitivities with respect to design changes are derived using the adjoint method. Since nearly void regions may be highly strained, these regions are excluded in the objective function by a projection method. In the numerical examples, compliant grippers and inverters are designed, and the tradeoff between the output displacement and the strain function is investigated. The numerical results show that distributed compliant mechanisms without lumped hinges can be obtained when including the variance of the strain in the objective function.
|
|
