| 1. |
|
|
| 2. |
|
|
| 3. |
- Glasbey, JC, et al.
(författare)
-
- 2021
-
swepub:Mat__t
|
|
| 4. |
|
|
| 5. |
- Sircova, Anna, et al.
(författare)
-
A global look at time : a 24-country study of the equivalence of the Zimbardo Time Perspective Inventory
- 2014
-
Ingår i: SAGE Open. - : SAGE Publications. - 2158-2440. ; :4, s. 1-12
-
Tidskriftsartikel (refereegranskat)abstract
- In this article, we assess the structural equivalence of the Zimbardo Time Perspective Inventory (ZTPI) across 26 samples from 24 countries (N = 12,200). The ZTPI is proven to be a valid and reliable index of individual differences in time perspective across five temporal categories: Past Negative, Past Positive, Present Fatalistic, Present Hedonistic, and Future. We obtained evidence for invariance of 36 items (out of 56) and also the five-factor structure of ZTPI across 23 countries. The short ZTPI scales are reliable for country-level analysis, whereas we recommend the use of the full scales for individual-level analysis. The short version of ZTPI will further promote integration of research in the time perspective domain in relation to many different psycho-social processes.
|
|
| 6. |
|
|
| 7. |
- Rykaczewska, U., et al.
(författare)
-
Plaque Evaluation by Ultrasound and Transcriptomics Reveals BCLAF1 as a Regulator of Smooth Muscle Cell Lipid Transdifferentiation in Atherosclerosis
- 2022
-
Ingår i: Arteriosclerosis Thrombosis and Vascular Biology. - : Ovid Technologies (Wolters Kluwer Health). - 1079-5642 .- 1524-4636. ; 42:5, s. 659-676
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Understanding the processes behind carotid plaque instability is necessary to develop methods for identification of patients and lesions with stroke risk. Here, we investigated molecular signatures in human plaques stratified by echogenicity as assessed by duplex ultrasound. Methods: Lesion echogenicity was correlated to microarray gene expression profiles from carotid endarterectomies (n=96). The findings were extended into studies of human and mouse atherosclerotic lesions in situ, followed by functional investigations in vitro in human carotid smooth muscle cells (SMCs). Results: Pathway analyses highlighted muscle differentiation, iron homeostasis, calcification, matrix organization, cell survival balance, and BCLAF1 (BCL2 [B-cell lymphoma 2]-associated transcription factor 1) as the most significant signatures. BCLAF1 was downregulated in echolucent plaques, positively correlated to proliferation and negatively to apoptosis. By immunohistochemistry, BCLAF1 was found in normal medial SMCs. It was repressed early during atherogenesis but reappeared in CD68+ cells in advanced plaques and interacted with BCL2 by proximity ligation assay. In cultured SMCs, BCLAF1 was induced by differentiation factors and mitogens and suppressed by macrophage-conditioned medium. BCLAF1 silencing led to downregulation of BCL2 and SMC markers, reduced proliferation, and increased apoptosis. Transdifferentiation of SMCs by oxLDL (oxidized low-denisty lipoprotein) was accompanied by upregulation of BCLAF1, CD36, and CD68, while oxLDL exposure with BCLAF1 silencing preserved MYH (myosin heavy chain) 11 expression and prevented transdifferentiation. BCLAF1 was associated with expression of cell differentiation, contractility, viability, and inflammatory genes, as well as the scavenger receptors CD36 and CD68. BCLAF1 expression in CD68+/BCL2+ cells of SMC origin was verified in plaques from MYH11 lineage-tracing atherosclerotic mice. Moreover, BCLAF1 downregulation associated with vulnerability parameters and cardiovascular risk in patients with carotid atherosclerosis. Conclusions: Plaque echogenicity correlated with enrichment of distinct molecular pathways and identified BCLAF1, previously not described in atherosclerosis, as the most significant gene. Functionally, BCLAF1 seems necessary for survival and transdifferentiation of SMCs into a macrophage-like phenotype. The role of BCLAF1 in plaque vulnerability should be further evaluated.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
| 11. |
- Haridas, Anupriya K., et al.
(författare)
-
A flexible and free-standing FeS/sulfurized polyacrylonitrile hybrid anode material for high-rate sodium-ion storage
- 2020
-
Ingår i: Chemical Engineering Journal. - : Elsevier BV. - 1385-8947. ; 385:1 April
-
Tidskriftsartikel (refereegranskat)abstract
- Sodium-ion based energy storage systems have attracted extensive attention due to the similarities in the mechanism of operation with lithium-ion batteries along with the additional benefit of low cost and high abundance of sodium resources. Iron sulfide-based electrodes that operate via conversion mechanism have shown ample potential for high energy sodium-ion storage. However, the problems related with tremendous volume changes and the dissolution of sodium polysulfides in the electrolyte deteriorate the cycle life and limit their application in sodium-ion batteries (SIBs). Herein, a hybrid anode material, FeS/SPAN-HNF, with iron sulfide (FeS) nanoparticles decorated in a sulfurized polyacrylonitrile (SPAN) fiber matrix is demonstrated as flexible and free-standing anode material for high-rate SIBs. Unlike previous strategies in which FeS is encapsulated in an electrochemically inactive carbon matrix, this study utilizes SPAN, an electrochemically active material, as a dual functional matrix that can efficiently buffer volume expansion and sulfur dissolution of FeS nanoparticles as well as provide significant capacity improvement. The as-designed electrode is self-standing and flexible, without current collectors, binders or additional conductive agents, thus rendering enhanced practical capacity and energy density. This electrode showed a high reversible capacity of 782.8 mAh g−1 at 200 mA g−1 with excellent high rate capability, maintaining 327.5 mAh g−1 after 500 cycles at 5 A g−1, emphasizing promising prospects for the development of flexible and high energy density SIBs.
|
|
| 12. |
- Haridas, Anupriya K., et al.
(författare)
-
Boosting High Energy Density Lithium-Ion Storage via the Rational Design of an FeS-Incorporated Sulfurized Polyacrylonitrile Fiber Hybrid Cathode
- 2019
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 11:33, s. 29924-29933
-
Tidskriftsartikel (refereegranskat)abstract
- In order to satisfy the escalating energy demands, it is inevitable to improve the energy density of current Li-ion batteries. As the development of high-capacity cathode materials is of paramount significance compared to anode materials, here we have designed for the first time a unique synergistic hybrid cathode material with enhanced specific capacity, incorporating cost-effective iron sulfide (FeS) nanoparticles in a sulfurized polyacrylonitrile (SPAN) nanofiber matrix through a rational in situ synthesis strategy. Previous reports on FeS cathodes are scarce and consist of an amorphous carbon matrix to accommodate the volume changes encountered during the cycling process. However, this inactive buffering matrix eventually increases the weight of the cell, reducing the overall energy density. By the rational design of this hybrid composite cathode, we ensure that the presence of covalently bonded sulfur in SPAN guarantees high sulfur utilization, while effectively buffering the volume changes in FeS. Meanwhile, FeS can compensate for the conductivity issues in the SPAN, thereby realizing a synergistically driven dual-active cathode material improving the overall energy density of the composite. Simultaneous in situ generation of FeS nanoparticles within the SPAN fiber matrix was carried out via electrospinning followed by a one-step heating procedure. The developed hybrid cathode material displays enhanced lithium-ion storage, retaining 688.6 mA h g(FeS@SPAN composite)-1 at the end of 500 cycles at 1 A g-1 even within a narrow voltage range of 1-3.0 V. A high discharge energy density > 900 W h kg(FeS@SPAN composite)-1, much higher than the theoretical energy density of the commercial LiCoO2 cathode, was also achieved, revealing the promising prospects of this hybrid cathode material for high energy density applications.
|
|
| 13. |
|
|
| 14. |
- Lim, D. H., et al.
(författare)
-
Polymer electrolytes based on poly(vinylidene fluoride-co-hexafluoropropylene) nanofibrous membranes containing polymer plasticizers for lithium batteries
- 2012
-
Ingår i: Solid State Ionics. - : Elsevier BV. - 0167-2738. ; 225, s. 631-635
-
Tidskriftsartikel (refereegranskat)abstract
- Gel polymer electrolytes (GPEs) were prepared with electrospun poly(vinylidene fluoride-co-hexafluoropropylene) [P(VdF-HFP)] nanofibrous membrane containing low molecular-weight polymer plasticizers, poly(ethylene glycol) dimethyl ether (PEGDME, Mw = 250 and 500). The fibers of electrospun membrane were stacked in layers to give fully interconnected pore structure with high porosity. The porous structure acted as a good host matrix to accommodate the polymer plasticizers. Thermogravimetric analysis (TGA) and field emission scanning electron microscope (FE-SEM) were used for thermal and physical characterizations, respectively. The GPEs exhibit high electrolyte uptake, high ionic conductivity, high anodic stability, and low interfacial resistance. Ionic conductivity and electrolyte uptake increased with the decrease in molecular weight of the polymer plasticizer. Prototype cells using electrospun P(VdF-HFP) nanofibrous GPEs with polymer plasticizers showed stable cyclic performances at different C-rates.
|
|
| 15. |
- Manuel, J., et al.
(författare)
-
Electrochemical properties of lithium polymer batteries with doped polyaniline as cathode material
- 2012
-
Ingår i: Materials Research Bulletin. - : Elsevier BV. - 0025-5408. ; 47:10, s. 2815-2818
-
Tidskriftsartikel (refereegranskat)abstract
- Polyaniline (PAN!) was doped with different lithium salts such as LiPFG and LiClO4 and evaluated as cathode-active material for application in room-temperature lithium batteries. The doped PANT was characterized by FTIR and XPS measurements. In the FTIR spectra, the characteristic peaks of PANT are shifted to lower bands as a consequence of doping, and it is more shifted in the case of PANI doped with LiPFG. The cathodes prepared using PANT doped with LiPF6 and LiClO4 delivered initial discharge capacities of 125 mAh g(-1) and 112 mAh g(-1) and stable reversible capacities of 114 mAh g(-1) and 81 mAh g(-1), respectively, after 10 charge-discharge cycles. The cells were also tested using polymer electrolyte, which delivered highest discharge capacities of 142.6 mAh g(-1) and 140 mAh g(-1) and stable reversible capacities of 117 mAh g(-1) and 122 mAh g(-1) for PANT-LiPF6 and PANI-LiClO4, respectively, after 10 cycles. The cathode prepared with LiPFG doped PANT shows better cycling performance and stability as compared to the cathode prepared with LiClO4 doped PANT using both liquid and polymer electrolytes.
|
|
| 16. |
|
|
| 17. |
- Agostini, Marco, 1987, et al.
(författare)
-
Rational Design of Low Cost and High Energy Lithium Batteries through Tailored Fluorine-free Electrolyte and Nanostructured S/C Composite
- 2018
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 11:17, s. 2981-2986
-
Tidskriftsartikel (refereegranskat)abstract
- We report a new Li–S cell concept based on an optimized F-free catholyte solution and a high loading nanostructured C/S composite cathode. The Li2S8present in the electrolyte ensures both buffering against active material dissolution and Li+conduction. The high S loading is obtained by confining elemental S (≈80 %) in the pores of a highly ordered mesopores carbon (CMK3). With this concept we demonstrate stabilization of a high energy density and excellent cycling performance over 500 cycles. This Li–S cell has a specific capacity that reaches over 1000 mA h g−1, with an overall S loading of 3.6 mg cm−2and low electrolyte volume (i.e., 10 μL cm−2), resulting in a practical energy density of 365 Wh kg−1. The Li–S system proposed thus meets the requirements for large scale energy storage systems and is expected to be environmentally friendly and have lower cost compared with the commercial Li-ion battery thanks to the removal of both Co and F from the overall formulation.
|
|
| 18. |
- Basu, Swaraj, et al.
(författare)
-
Accurate mapping of mitochondrial DNA deletions and duplications using deep sequencing
- 2020
-
Ingår i: PLoS Genetics. - : Public Library of Science (PLoS). - 1553-7404. ; 16:12
-
Tidskriftsartikel (refereegranskat)abstract
- Deletions and duplications in mitochondrial DNA (mtDNA) cause mitochondrial disease and accumulate in conditions such as cancer and age-related disorders, but validated high-throughput methodology that can readily detect and discriminate between these two types of events is lacking. Here we establish a computational method, MitoSAlt, for accurate identification, quantification and visualization of mtDNA deletions and duplications from genomic sequencing data. Our method was tested on simulated sequencing reads and human patient samples with single deletions and duplications to verify its accuracy. Application to mouse models of mtDNA maintenance disease demonstrated the ability to detect deletions and duplications even at low levels of heteroplasmy. Author summary Deletions in the mitochondrial genome cause a wide variety of rare disorders, but are also linked to more common conditions such as neurodegeneration, diabetes type 2, and the normal ageing process. There is also a growing awareness that mtDNA duplications, which are also relevant for human disease, may be more common than previously thought. Despite their clinical importance, our current knowledge about the abundance, characteristics and diversity of mtDNA deletions and duplications is fragmented, and based to large extent on a limited view provided by traditional low-throughput analyses. Here, we describe a bioinformatics method, MitoSAlt, that can accurately map and classify mtDNA deletions and duplications using high-throughput sequencing. Application of this methodology to mouse models of mitochondrial deficiencies revealed a large number of duplications, suggesting that these may previously have been underestimated.
|
|
| 19. |
|
|
| 20. |
|
|
| 21. |
- Forteza, Maria J., et al.
(författare)
-
Pyruvate dehydrogenase kinase regulates vascular inflammation in atherosclerosis and increases cardiovascular risk
- 2023
-
Ingår i: Cardiovascular Research. - : Oxford University Press (OUP). - 0008-6363 .- 1755-3245. ; 119:7, s. 1524-1536
-
Tidskriftsartikel (refereegranskat)abstract
- Recent studies have revealed a close connection between cellular metabolism and the chronic inflammatory process of atherosclerosis. While the link between systemic metabolism and atherosclerosis is well established, the implications of altered metabolism in the artery wall are less understood. Pyruvate dehydrogenase kinase (PDK)-dependent inhibition of pyruvate dehydrogenase (PDH) has been identified as a major metabolic step regulating inflammation. Whether the PDK/PDH axis plays a role in vascular inflammation and atherosclerotic cardiovascular disease remains unclear. Methods and results Gene profiling of human atherosclerotic plaques revealed a strong correlation between PDK1 and PDK4 transcript levels and the expression of pro-inflammatory and destabilizing genes. Remarkably, the PDK1 and PDK4 expression correlated with a more vulnerable plaque phenotype, and PDK1 expression was found to predict future major adverse cardiovascular events. Using the small-molecule PDK inhibitor dichloroacetate (DCA) that restores arterial PDH activity, we demonstrated that the PDK/PDH axis is a major immunometabolic pathway, regulating immune cell polarization, plaque development, and fibrous cap formation in Apoe−/− mice. Surprisingly, we discovered that DCA regulates succinate release and mitigates its GPR91-dependent signals promoting NLRP3 inflammasome activation and IL-1β secretion by macrophages in the plaque. Conclusions We have demonstrated for the first time that the PDK/PDH axis is associated with vascular inflammation in humans and particularly that the PDK1 isozyme is associated with more severe disease and could predict secondary cardiovascular events. Moreover, we demonstrate that targeting the PDK/PDH axis with DCA skews the immune system, inhibits vascular inflammation and atherogenesis, and promotes plaque stability features in Apoe−/− mice. These results point toward a promising treatment to combat atherosclerosis.
|
|
| 22. |
|
|
| 23. |
- Heuschkel, MA, et al.
(författare)
-
Integrative Multi-Omics Analysis in Calcific Aortic Valve Disease Reveals a Link to the Formation of Amyloid-Like Deposits
- 2020
-
Ingår i: Cells. - : MDPI AG. - 2073-4409. ; 9:10
-
Tidskriftsartikel (refereegranskat)abstract
- Calcific aortic valve disease (CAVD) is the most prevalent valvular heart disease in the developed world, yet no pharmacological therapy exists. Here, we hypothesize that the integration of multiple omic data represents an approach towards unveiling novel molecular networks in CAVD. Databases were searched for CAVD omic studies. Differentially expressed molecules from calcified and control samples were retrieved, identifying 32 micro RNAs (miRNA), 596 mRNAs and 80 proteins. Over-representation pathway analysis revealed platelet degranulation and complement/coagulation cascade as dysregulated pathways. Multi-omics integration of overlapping proteome/transcriptome molecules, with the miRNAs, identified a CAVD protein–protein interaction network containing seven seed genes (apolipoprotein A1 (APOA1), hemoglobin subunit β (HBB), transferrin (TF), α-2-macroglobulin (A2M), transforming growth factor β-induced protein (TGFBI), serpin family A member 1 (SERPINA1), lipopolysaccharide binding protein (LBP), inter-α-trypsin inhibitor heavy chain 3 (ITIH3) and immunoglobulin κ constant (IGKC)), four input miRNAs (miR-335-5p, miR-3663-3p, miR-21-5p, miR-93-5p) and two connector genes (amyloid beta precursor protein (APP) and transthyretin (TTR)). In a metabolite–gene–disease network, Alzheimer’s disease exhibited the highest degree of betweenness. To further strengthen the associations based on the multi-omics approach, we validated the presence of APP and TTR in calcified valves from CAVD patients by immunohistochemistry. Our study suggests a novel molecular CAVD network potentially linked to the formation of amyloid-like structures. Further investigations on the associated mechanisms and therapeutic potential of targeting amyloid-like deposits in CAVD may offer significant health benefits.
|
|
| 24. |
- Kim, Jae-Kwang, 1978, et al.
(författare)
-
Electrochemical properties of a full cell of lithium iron phosphate cathode using thin amorphous silicon anode
- 2014
-
Ingår i: Solid State Ionics. - : Elsevier BV. - 0167-2738. ; 268:Part B, s. 256-260
-
Tidskriftsartikel (refereegranskat)abstract
- Carbon-coated lithium iron phosphate (LiFePO4/C) with uniform carbon coating was synthesized by a mechanical activation method. Silicon negative electrode material was obtained in the form of thin films of amorphous silicon on a Cu foil substrate by vertical deposition technique. The electrochemical performance of the full cell, LiFePO4/C-Si, was tested with 1 M LiPF6 in EC/DMC at 0.5 and 1 C-rates. The cell exhibited an initial discharge capacity of 143.9 mAh g(-1) at 0.5 C-rate at room temperature. A reasonably good cycling performance under a high current density of 1 C-rate could be obtained with the full cell.
|
|
| 25. |
- Kim, Jae-Kwang, 1978, et al.
(författare)
-
Towards flexible secondary lithium batteries: polypyrrole-LiFePO4 thin electrodes with polymer electrolytes
- 2012
-
Ingår i: Journal of Materials Chemistry. - : Royal Society of Chemistry (RSC). - 1364-5501 .- 0959-9428. ; 22:30, s. 15045-15049
-
Tidskriftsartikel (refereegranskat)abstract
- A thin flexible polypyrrole-lithium iron phosphate (PPy-LiFePO4) based cathode has been fabricated. A slurry containing carbon black, a binder and the active material prepared by direct polymerization of pyrrole on the surface of LiFePO4 (LFP) was spread on an Al/carbon film substrate by the doctor blade method. Transmission electron micrographs reveal that PPy nanoparticles form a web like structure over the surface of LFP particles. After doping with lithium ions the PPy network becomes conducting. When evaluated as a cathode of 180 mu m thickness together with a gel polymer electrolyte and a lithium anode, the charge-discharge performance reveals that the electrochemical properties of LFP are influenced to a considerable extent by the PPy. The cells show high initial discharge capacities of 135 and 110 mA h g(-1) for 0.041 (C/10) and 0.21 (C/2) mA cm(-2), respectively, and high active material utilization. Furthermore the cells exhibit stable cycle properties even at 0.21 mA cm(-2) with a low capacity fade per cycle (similar to 0.3%).
|
|
