| 1. |
- Fomalont, E. B., et al.
(författare)
-
THE 2014 ALMA LONG BASELINE CAMPAIGN: AN OVERVIEW
- 2015
-
Ingår i: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 808:1
-
Tidskriftsartikel (refereegranskat)abstract
- A major goal of the Atacama Large Millimeter/submillimeter Array (ALMA) is to make accurate images with resolutions of tens of milliarcseconds, which at submillimeter (submm) wavelengths requires baselines up to similar to 15 km. To develop and test this capability, a Long Baseline Campaign (LBC) was carried out from 2014 September to late November, culminating in end-to-end observations, calibrations, and imaging of selected Science Verification (SV) targets. This paper presents an overview of the campaign and its main results, including an investigation of the short-term coherence properties and systematic phase errors over the long baselines at the ALMA site, a summary of the SV targets and observations, and recommendations for science observing strategies at long baselines. Deep ALMA images of the quasar 3C 138 at 97 and 241 GHz are also compared to VLA 43 GHz results, demonstrating an agreement at a level of a few percent. As a result of the extensive program of LBC testing, the highly successful SV imaging at long baselines achieved angular resolutions as fine as 19 mas at similar to 350 GHz. Observing with ALMA on baselines of up to 15 km is now possible, and opens up new parameter space for submm astronomy.
|
|
| 2. |
- André, Ph., et al.
(författare)
-
Probing the cold magnetised Universe with SPICA-POL (B-BOP)
- 2019
-
Ingår i: Publications Astronomical Society of Australia. - : Cambridge University Press (CUP). - 1323-3580 .- 1448-6083. ; 36
-
Forskningsöversikt (refereegranskat)abstract
- Space Infrared Telescope for Cosmology and Astrophysics (SPICA), the cryogenic infrared space telescope recently pre-selected for a 'Phase A' concept study as one of the three remaining candidates for European Space Agency (ESA's) fifth medium class (M5) mission, is foreseen to include a far-infrared polarimetric imager [SPICA-POL, now called B-fields with BOlometers and Polarizers (B-BOP)], which would offer a unique opportunity to resolve major issues in our understanding of the nearby, cold magnetised Universe. This paper presents an overview of the main science drivers for B-BOP, including high dynamic range polarimetric imaging of the cold interstellar medium (ISM) in both our Milky Way and nearby galaxies. Thanks to a cooled telescope, B-BOP will deliver wide-field 100-350 mu m images of linearly polarised dust emission in Stokes Q and U with a resolution, signal-to-noise ratio, and both intensity and spatial dynamic ranges comparable to those achieved by Herschel images of the cold ISM in total intensity (Stokes I). The B-BOP 200 mu m images will also have a factor similar to 30 higher resolution than Planck polarisation data. This will make B-BOP a unique tool for characterising the statistical properties of the magnetised ISM and probing the role of magnetic fields in the formation and evolution of the interstellar web of dusty molecular filaments giving birth to most stars in our Galaxy. B-BOP will also be a powerful instrument for studying the magnetism of nearby galaxies and testing Galactic dynamo models, constraining the physics of dust grain alignment, informing the problem of the interaction of cosmic rays with molecular clouds, tracing magnetic fields in the inner layers of protoplanetary disks, and monitoring accretion bursts in embedded protostars.
|
|
| 3. |
- Adam, R. M., et al.
(författare)
-
The XXL Survey: LI. Pressure profile and Y SZ -M scaling relation in three low-mass galaxy clusters at z∼1 observed with NIKA2
- 2024
-
Ingår i: Astronomy and Astrophysics. - 0004-6361 .- 1432-0746. ; 684
-
Tidskriftsartikel (refereegranskat)abstract
- Context. The thermodynamical properties of the intracluster medium (ICM) are driven by scale-free gravitational collapse, but they also reflect the rich astrophysical processes at play in galaxy clusters. At low masses (∼1014M) and high redshift (z≳1), these properties remain poorly constrained, observationally speaking, due to the difficulty in obtaining resolved and sensitive data. Aims. We aim to investigate the inner structure of the ICM as seen through the Sunyaev-Zel’dovich (SZ) effect in this regime of mass and redshift. We focused on the thermal pressure profile and the scaling relation between SZ flux and mass, namely the YSZ-M scaling relation. Methods. The three galaxy clusters XLSSC 072 (z=1.002), XLSSC 100 (z=0.915), and XLSSC 102 (z=0.969), with M500∼2×1014M, were selected from the XXL X-ray survey and observed with the NIKA2 millimeter camera to image their SZ signal. XMM-Newton X-ray data were used as a complement to the NIKA2 data to derive masses based on the YX-M relation and the hydrostatic equilibrium. Results. The SZ images of the three clusters, along with the X-ray and optical data, indicate dynamical activity related to merging events. The pressure profile is consistent with that expected for morphologically disturbed systems, with a relatively flat core and a shallow outer slope. Despite significant disturbances in the ICM, the three high-redshift low-mass clusters follow the YSZ-M relation expected from standard evolution remarkably well. Conclusions. These results indicate that the dominant physics that drives cluster evolution is already in place by z∼1, at least for systems with masses above M500∼1014M.
|
|
| 4. |
- Ritacco, A., et al.
(författare)
-
NIKA 150 GHz polarization observations of the Crab nebula and its spectral energy distribution
- 2018
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 616
-
Tidskriftsartikel (refereegranskat)abstract
- The Crab nebula is a supernova remnant exhibiting a highly polarized synchrotron radiation at radio and millimetre wavelengths. It is the brightest source in the microwave sky with an extension of 7 by 5 arcmin, and is commonly used as a standard candle for any experiment which aims to measure the polarization of the sky. Though its spectral energy distribution has been well characterized in total intensity, polarization data are still lacking at millimetre wavelengths. We report in this paper high resolution observations (18 00 FWHM) of the Crab nebula in total intensity and linear polarization at 150 GHz with the NIKA camera. NIKA, operated at the IRAM 30 m telescope from 2012 to 2015, is a camera made of Lumped Element Kinetic Inductance Detectors (LEKIDs) observing the sky at 150 and 260 GHz. From these observations we are able to reconstruct the spatial distribution of the polarization degree and angle of the Crab nebula, which is found to be compatible with previous observations at lower and higher frequencies. Averaging across the source and using other existing data sets we find that the Crab nebula polarization angle is consistent with being constant over a wide range of frequencies with a value of -87.7 degrees +/- 0.3 in Galactic coordinates. We also present the first estimation of the Crab nebula spectral energy distribution polarized flux in a wide frequency range: 30-353 GHz. Assuming a single power law emission model we find that the polarization spectral index beta(pol) = -0.347 +/- 0.026 is compatible with the intensity spectral index beta = -0.323 +/- 0.001.
|
|
| 5. |
- Lotze, Heike K., et al.
(författare)
-
Global ensemble projections reveal trophic amplification of ocean biomass declines with climate change
- 2019
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 116:26, s. 12907-12912
-
Tidskriftsartikel (refereegranskat)abstract
- While the physical dimensions of climate change are now routinely assessed through multimodel intercomparisons, projected impacts on the global ocean ecosystem generally rely on individual models with a specific set of assumptions. To address these single-model limitations, we present standardized ensemble projections from six global marine ecosystem models forced with two Earth system models and four emission scenarios with and without fishing. We derive average biomass trends and associated uncertainties across the marine food web. Without fishing, mean global animal biomass decreased by 5% (+/- 4% SD) under low emissions and 17% (+/- 11% SD) under high emissions by 2100, with an average 5% decline for every 1 degrees C of warming. Projected biomass declines were primarily driven by increasing temperature and decreasing primary production, and were more pronounced at higher trophic levels, a process known as trophic amplification. Fishing did not substantially alter the effects of climate change. Considerable regional variation featured strong biomass increases at high latitudes and decreases at middle to low latitudes, with good model agreement on the direction of change but variable magnitude. Uncertainties due to variations in marine ecosystem and Earth system models were similar. Ensemble projections performed well compared with empirical data, emphasizing the benefits of multimodel inference to project future outcomes. Our results indicate that global ocean animal biomass consistently declines with climate change, and that these impacts are amplified at higher trophic levels. Next steps for model development include dynamic scenarios of fishing, cumulative human impacts, and the effects of management measures on future ocean biomass trends.
|
|
| 6. |
- Tittensor, Derek P., et al.
(författare)
-
A protocol for the intercomparison of marine fishery and ecosystem models : Fish-MIP v1.0
- 2018
-
Ingår i: Geoscientific Model Development. - : Copernicus GmbH. - 1991-959X .- 1991-9603. ; 11:4, s. 1421-1442
-
Tidskriftsartikel (refereegranskat)abstract
- Model intercomparison studies in the climate and Earth sciences communities have been crucial to building credibility and coherence for future projections. They have quantified variability among models, spurred model development, contrasted within- and among-model uncertainty, assessed model fits to historical data, and provided ensemble projections of future change under specified scenarios. Given the speed and magnitude of anthropogenic change in the marine environment and the consequent effects on food security, biodiversity, marine industries, and society, the time is ripe for similar comparisons among models of fisheries and marine ecosystems. Here, we describe the Fisheries and Marine Ecosystem Model Intercomparison Project protocol version 1.0 (Fish-MIP v1.0), part of the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP), which is a cross-sectoral network of climate impact modellers. Given the complexity of the marine ecosystem, this class of models has substantial heterogeneity of purpose, scope, theoretical underpinning, processes considered, parameterizations, resolution (grain size), and spatial extent. This heterogeneity reflects the lack of a unified understanding of the marine ecosystem and implies that the assemblage of all models is more likely to include a greater number of relevant processes than any single model. The current Fish-MIP protocol is designed to allow these heterogeneous models to be forced with common Earth System Model (ESM) Coupled Model Intercomparison Project Phase 5 (CMIP5) outputs under prescribed scenarios for historic (from the 1950s) and future (to 2100) time periods; it will be adapted to CMIP phase 6 (CMIP6) in future iterations. It also describes a standardized set of outputs for each participating Fish-MIP model to produce. This enables the broad characterization of differences between and uncertainties within models and projections when assessing climate and fisheries impacts on marine ecosystems and the services they provide. The systematic generation, collation, and comparison of results from Fish-MIP will inform an understanding of the range of plausible changes in marine ecosystems and improve our capacity to define and convey the strengths and weaknesses of model-based advice on future states of marine ecosystems and fisheries. Ultimately, Fish-MIP represents a step towards bringing together the marine ecosystem modelling community to produce consistent ensemble medium- and long-term projections of marine ecosystems.
|
|
| 7. |
|
|
| 8. |
- Asadollahi, M. A., et al.
(författare)
-
Enhancement of Farnesyl Diphosphate Pool as Direct Precursor of Sesquiterpenes Through Metabolic Engineering of the Mevalonate Pathway in Saccharomyces cerevisiae
- 2010
-
Ingår i: Biotechnology and Bioengineering. - : Wiley. - 0006-3592 .- 1097-0290. ; 106:1, s. 86-96
-
Tidskriftsartikel (refereegranskat)abstract
- The mevalonate pathway in the yeast Saccharomyces cerevisiae was deregulated in order to enhance the intracellular pool of farnesyl diphosphate (FPP), the direct precursor for the biosynthesis of sesquiterpenes. Overexpression of the catalytic domain of HMG1, both from the genome and plasmid, resulted in higher production of cubebol, a plant originating sesquiterpene, and increased squalene accumulation. Down-regulation of ERG9 by replacing its native promoter with the regulatable MET3 promoter, enhanced cubebol titers but simultaneous overexpression of tHMG1 and repression of ERG9 did not further improve cubebol production. Furtheremore, the concentrations of squalene and ergosterol were measured in the engineered strains. Unexpectedly, significant accumulation of squalene and restoring the ergosterol biosynthesis were observed in the ERG9 repressed strains transformed with the plasmids harboring cubebol synthase gene. This could be explained by a toxicity effect of cubebol, possibly resulting in higher transcription levels for the genes under control of MET3 promoter, which could lead to accumulation of squalene and ergosterol. Biotechnol. Bioeng. 2010;106: 86-96. (C) 2010 Wiley Periodicals, Inc.
|
|
| 9. |
- Asadollahi, M. A., et al.
(författare)
-
Enhancing sesquiterpene production in Saccharomyces cerevisiae through in silico driven metabolic engineering
- 2009
-
Ingår i: Metabolic Engineering. - : Elsevier BV. - 1096-7176 .- 1096-7184. ; 11:6, s. 328-334
-
Tidskriftsartikel (refereegranskat)abstract
- A genome-scale metabolic model was used to identify new target genes for enhanced biosynthesis of sesquiterpenes in the yeast Saccharomyces cerevisiae. The effect of gene deletions on the flux distributions in the metabolic model of S. cerevisiae was assessed using Opt Gene as the modeling framework and minimization of metabolic adjustments (MOMA) as objective function. Deletion of NADPH-dependent glutamate dehydrogenase encoded by GDH1 was identified as the best target gene for the improvement of sesquiterpene biosynthesis in yeast. Deletion of this gene enhances the available NADPH in the cytosol for other NADPH requiring enzymes, including HMG-CoA reductase. However, since disruption of GDH1 impairs the ammonia utilization, simultaneous over-expression of the NADH-dependent glutamate dehydrogenase en coded by GDH2 was also considered in this study. Deletion of GDH1 led to an approximately 85% increase in the final cubebol titer. However, deletion of this gene also caused a significant decrease in the maximum specific growth rate. Over-expression of GDH2 did not show a further effect on the final cubebol titer but this alteration significantly improved the growth rate compared to the GDH1 deleted strain. (C) 2009 Elsevier Inc. All rights reserved.
|
|
| 10. |
|
|
| 11. |
- De Simone, M., et al.
(författare)
-
Glycolaldehyde in Perseus young solar analogs
- 2017
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 599
-
Tidskriftsartikel (refereegranskat)abstract
- © ESO 2017. Context. The earliest evolutionary stages of low-mass protostars are characterised by the so-called hot-corino stage, when the newly born star heats the surrounding material and enrich the gas chemically. Studying this evolutionary phase of solar protostars may help understand the evolution of prebiotic complex molecules in the development of planetary systems. Aims. In this paper we focus on the occurrence of glycolaldehyde (HCOCH 2 OH) in young solar analogs by performing the first homogeneous and unbiased study of this molecule in the Class 0 protostars of the nearby Perseus star forming region. Methods. We obtained sub-arcsec angular resolution maps at 1.3 mm and 1.4 mm of glycolaldehyde emission lines using the IRAM Plateau de Bure (PdB) interferometer in the framework of the CALYPSO IRAM large program. Results. Glycolaldehyde has been detected towards 3 Class 0 and 1 Class I protostars out of the 13 continuum sources targeted in Perseus: NGC1333-IRAS2A1, NGC1333-IRAS4A2, NGC1333-IRAS4B1, and SVS13-A. The NGC1333 star forming region looks particularly glycolaldehyde rich, with a rate of occurrence up to 60%. The glycolaldehyde spatial distribution overlaps with the continuum one, tracing the inner 100 au around the protostar. A large number of lines (up to 18), with upper-level energies E u from 37 K up to 375 K has been detected. We derived column densities ≥10 15 cm -2 and rotational temperatures T rot between 115 K and 236 K, imaging for the first time hot-corinos around NGC1333-IRAS4B1 and SVS13-A. Conclusions. In multiple systems glycolaldehyde emission is detected only in one component. The case of the SVS13-A+B and IRAS4-A1+A2 systems support that the detection of glycolaldehyde (at least in the present Perseus sample) indicates older protostars (i.e. SVS13-A and IRAS4-A2), evolved enough to develop the hot-corino region (i.e. 100 K in the inner 100 au). However, only two systems do not allow us to firmly conclude whether the primary factor leading to the detection of glycolaldehyde emission is the environments hosting the protostars, evolution (e.g. low value of L submm /L int ), or accretion luminosity (high L int ).
|
|
| 12. |
|
|
| 13. |
- Maury, J., et al.
(författare)
-
EasyCloneMulti: A Set of Vectors for Simultaneous and Multiple Genomic Integrations in Saccharomyces cerevisiae
- 2016
-
Ingår i: PLoS ONE. - : Public Library of Science (PLoS). - 1932-6203 .- 1932-6203. ; 11:3
-
Tidskriftsartikel (refereegranskat)abstract
- Saccharomyces cerevisiae is widely used in the biotechnology industry for production of ethanol, recombinant proteins, food ingredients and other chemicals. In order to generate highly producing and stable strains, genome integration of genes encoding metabolic pathway enzymes is the preferred option. However, integration of pathway genes in single or few copies, especially those encoding rate-controlling steps, is often not sufficient to sustain high metabolic fluxes. By exploiting the sequence diversity in the long terminal repeats (LTR) of Ty retrotransposons, we developed a new set of integrative vectors, EasyCloneMulti, that enables multiple and simultaneous integration of genes in S. cerevisiae. By creating vector backbones that combine consensus sequences that aim at targeting subsets of Ty sequences and a quickly degrading selective marker, integrations at multiple genomic loci and a range of expression levels were obtained, as assessed with the green fluorescent protein (GFP) reporter system. The EasyCloneMulti vector set was applied to balance the expression of the rate-controlling step in the beta-alanine pathway for biosynthesis of 3-hydroxypropionic acid (3HP). The best 3HP producing clone, with 5.45 g.L-1 of 3HP, produced 11 times more 3HP than the lowest producing clone, which demonstrates the capability of EasyCloneMulti vectors to impact metabolic pathway enzyme activity.
|
|
| 14. |
- Maury, J., et al.
(författare)
-
Reconstruction of a bacterial isoprenoid biosynthetic pathway in Saccharomyces cerevisiae
- 2008
-
Ingår i: FEBS Letters. - : Wiley. - 1873-3468 .- 0014-5793. ; 582:29, s. 4032-4038
-
Tidskriftsartikel (refereegranskat)abstract
- A eukaryotic mevalonate pathway transferred and expressed in Escherichia coli, and a mammalian hydrocortisone biosynthetic pathway rebuilt in Saccharomyces cerevisiae are examples showing that transferring metabolic pathways from one organism to another can have a powerful impact on cell properties. In this study, we reconstructed the E. coli isoprenoid biosynthetic pathway in S. cerevisiae. Genes encoding the seven enzymatic steps of the pathway were cloned and expressed in S. cerevisiae. mRNA from the seven genes was detected, and the pathway was shown able to sustain growth of yeast in conditions of inhibition of its constitutive isoprenoid biosynthetic pathway. © 2008 Federation of European Biochemical Societies.
|
|
| 15. |
- Otero, José Manuel, 1979, et al.
(författare)
-
Whole genome sequencing of Saccharomyces cerevisiae: from genotype to phenotype for improved metabolic engineering applications
- 2010
-
Ingår i: BMC Genomics. - : Springer Science and Business Media LLC. - 1471-2164. ; 11:1, s. 723-
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The need for rapid and efficient microbial cell factory design and construction are possible through the enabling technology, metabolic engineering, which is now being facilitated by systems biology approaches. Metabolic engineering is often complimented by directed evolution, where selective pressure is applied to a partially genetically engineered strain to confer a desirable phenotype. The exact genetic modification or resulting genotype that leads to the improved phenotype is often not identified or understood to enable further metabolic engineering.Results: In this work we performed whole genome high-throughput sequencing and annotation can be used to identify single nucleotide polymorphisms (SNPs) between Saccharomyces cerevisiae strains S288c and CEN.PK113-7D. The yeast strain S288c was the first eukaryote sequenced, serving as the reference genome for the Saccharomyces Genome Database, while CEN.PK113-7D is a preferred laboratory strain for industrial biotechnology research. A total of 13,787 high-quality SNPs were detected between both strains (reference strain: S288c). Considering only metabolic genes (782 of 5,596 annotated genes), a total of 219 metabolism specific SNPs are distributed across 158 metabolic genes, with 85 of the SNPs being nonsynonymous (e. g., encoding amino acid modifications). Amongst metabolic SNPs detected, there was pathway enrichment in the galactose uptake pathway (GAL1, GAL10) and ergosterol biosynthetic pathway (ERG8, ERG9). Physiological characterization confirmed a strong deficiency in galactose uptake and metabolism in S288c compared to CEN.PK113-7D, and similarly, ergosterol content in CEN.PK113-7D was significantly higher in both glucose and galactose supplemented cultivations compared to S288c. Furthermore, DNA microarray profiling of S288c and CEN.PK113-7D in both glucose and galactose batch cultures did not provide a clear hypothesis for major phenotypes observed, suggesting that genotype to phenotype correlations are manifested post-transcriptionally or post-translationally either through protein concentration and/or function.Conclusions: With an intensifying need for microbial cell factories that produce a wide array of target compounds, whole genome high-throughput sequencing and annotation for SNP detection can aid in better reducing and defining the metabolic landscape. This work demonstrates direct correlations between genotype and phenotype that provides clear and high-probability of success metabolic engineering targets. The genome sequence, annotation, and a SNP viewer of CEN.PK113-7D are deposited at http://www.sysbio.se/cenpk.
|
|
| 16. |
- Bellier, Q., et al.
(författare)
-
Design of near-infrared dyes for nonlinear optics : Towards optical limiting applications at telecommunication wavelengths
- 2009
-
Ingår i: Optical Materials in Defence Systems Technology VI. - : SPIE - International Society for Optical Engineering. - 9780819477934 ; , s. 74870G-
-
Konferensbidrag (refereegranskat)abstract
- The rapid development of frequency-tunable pulsed lasers up to telecommunication wavelengths (1400-1600 nm) led to the design of new materials for nonlinear absorption in this spectral range. In this context, two families of near infra-red (NIR) chromophores, namely heptamethine cyanine and aza-borondipyrromethene (aza-bodipy) dyes were studied. In both cases, they show significant two-photon absorption (TPA) cross-sections in the 1400-1600 nm spectral range and display good optical power limiting (OPL) properties. OPL curves were interpreted on the basis of TPA followed by excited state absorption (ESA) phenomena. Finally these systems have several relevant properties like nonlinear absorption properties, gram scale synthesis and high solubility. In addition, they could be functionalized on several sites which open the way to numerous practical applications in biology, solid-state optical limiting and signal processing.
|
|
| 17. |
- Czerw, Tomasz, et al.
(författare)
-
Impact of donor-derived CD34+infused cell dose on outcomes of patients undergoing allo-HCT following reduced intensity regimen for myelofibrosis: a study from the Chronic Malignancies Working Party of the EBMT
- 2022
-
Ingår i: Bone Marrow Transplantation. - : SPRINGER NATURE. - 0268-3369 .- 1476-5365. ; 57, s. 261-270
-
Tidskriftsartikel (refereegranskat)abstract
- The optimal CD34 + cell dose in the setting of RIC allo-HCT for myelofibrosis (MF) remains unknown. We retrospectively analyzed 657 patients with primary or secondary MF transplanted with use of peripheral blood (PB) stem cells after fludarabine/melphalan or fludarabine/busulfan RIC regimen. Median patient age was 58 (range, 22-76) years. Donors were HLA-identical sibling (MSD) or unrelated (UD). Median follow-up was 46 (2-194) months. Patients transplanted with higher doses of CD34 + cells (>7.0 x 10(6)/kg), had an increased chance of achievement of both neutrophil (hazard ratio (HR), 1.46; P < 0.001) and platelet engraftment (HR, 1.43; P < 0.001). In a model with interaction, for patients transplanted from a MSD, higher CD34 + dose was associated with improved overall survival (HR, 0.63; P = 0.04) and relapse-free survival (HR, 0.61; P = 0.02), lower risk of non-relapse mortality (HR, 0.57; P = 0.04) and higher rate of platelet engraftment. The combined effect of higher cell dose and UD was apparent only for higher neutrophil and platelet recovery rate. We did not document any detrimental effect of high CD34 + dose on transplant outcomes. More bulky splenomegaly was an adverse factor for survival, engraftment and NRM. Our analysis suggests a potential benefit for MF patients undergoing RIC PB-allo-HCT receiving more than 7.0 x 10(6)/kg CD34 + cells.
|
|
| 18. |
- De Huu, Marc A., et al.
(författare)
-
The European Research Project on Metrology for Hydrogen Vehicles - MetroHyVe
- 2018
-
Ingår i: Journal of Physics. - : Institute of Physics Publishing.
-
Konferensbidrag (refereegranskat)abstract
- A large hydrogen infrastructure is currently in development across Europe. However, the industry faces the dilemma that they are required to meet certain measurement requirements set by European legislation that cannot currently be followed due to the lack of available methods and standards. The EMPIR Metrology for Hydrogen Vehicles project will be the first large scale project of its kind that will tackle the four measurement challenges that currently prevent the industry from meeting requirements set by International Standards such as flow metering, quality control, quality assurance and sampling. This paper presents a brief overview of the specific objectives of the project and focuses on the flow metering work package and the presentation of its planned tasks, which comprise laboratory and measurements in the field. Laboratory work will assess the use of substitute fluids to hydrogen to provide a safer and more cost effective method for the type approval of Hydrogen Refuelling Stations (HRS). To be able to link laboratory work to field testing, mobile primary standards will be developed and the design of a field testing primary standard will be addressed. The aim is to inform what the European national metrology institutes are currently developing in the field of hydrogen flow metering and quality control of HRS.
|
|
| 19. |
- Frieler, Katja, et al.
(författare)
-
Scenario setup and forcing data for impact model evaluation and impact attribution within the third round of the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP3a)
- 2024
-
Ingår i: Geoscientific Model Development. - : Copernicus Publications. - 1991-959X .- 1991-9603. ; 17:1, s. 1-51
-
Tidskriftsartikel (refereegranskat)abstract
- This paper describes the rationale and the protocol of the first component of the third simulation round of the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP3a, http://www.isimip.org, last access: 2 November 2023) and the associated set of climate-related and direct human forcing data (CRF and DHF, respectively). The observation-based climate-related forcings for the first time include high-resolution observational climate forcings derived by orographic downscaling, monthly to hourly coastal water levels, and wind fields associated with historical tropical cyclones. The DHFs include land use patterns, population densities, information about water and agricultural management, and fishing intensities. The ISIMIP3a impact model simulations driven by these observation-based climate-related and direct human forcings are designed to test to what degree the impact models can explain observed changes in natural and human systems. In a second set of ISIMIP3a experiments the participating impact models are forced by the same DHFs but a counterfactual set of atmospheric forcings and coastal water levels where observed trends have been removed. These experiments are designed to allow for the attribution of observed changes in natural, human, and managed systems to climate change, rising CH4 and CO2 concentrations, and sea level rise according to the definition of the Working Group II contribution to the IPCC AR6.
|
|
| 20. |
|
|
| 21. |
- Maury, J., et al.
(författare)
-
Metabolic engineering of isoprenoid production: Reconstruction of multistep heterologous pathways in tractable hosts
- 2013
-
Ingår i: Isoprenoid Synthesis in Plants and Microorganisms: New Concepts and Experimental Approaches. - New York, NY : Springer New York. - 9781461440635 ; , s. 73-89
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Isoprenoids represent a wide group of chemically active compounds that can find a wide range of applications as flavors, perfumes, vitamins, nutraceuticals, and pharmaceuticals. Many isoprenoids are naturally produced in very low quantities by plants, which make their use in broader perspectives difficult. Microbial production of plant-originating isoprenoids quickly appeared as an alternative of choice. Metabolic engineering methods were applied and proved successful to improve the supply of precursors to derive toward isoprenoid compounds of interest. Combinations between metabolic engineering and the flourishing field of synthetic biology have also been observed with researchers attempting to reconstruct and optimize complex biosynthetic pathways in well-characterized and tractable microbial hosts. In this chapter, we review recent metabolic engineering studies for isoprenoid production in yeast and try to show, through key examples, that the fields of synthetic biology and metabolic engineering can go hand in hand to establish microbial cell factories for isoprenoid production.
|
|
| 22. |
- Maury, O., et al.
(författare)
-
A global science-policy partnership for progress toward sustainability of oceanic ecosystems and fisheries
- 2013
-
Ingår i: Current Opinion in Environmental Sustainability. - : Elsevier BV. - 1877-3435 .- 1877-3443. ; 5:3-4, s. 314-319
-
Forskningsöversikt (refereegranskat)abstract
- Oceanic ecosystems support livelihoods and supply food for hundreds of millions of people. But these ecosystems are deteriorating rapidly and many of the world's oceanic fisheries are in a precarious condition. In addition to well-known and pressing fishery management issues, economic globalization is connecting fisheries beyond the frontiers of the organizations responsible for their management and climate-associated changes are deeply modifying ecosystems, pushing them toward new states and no return situations. The status quo is not a sustainable option, and improved international governance is urgently needed to address this situation. Our proposition consists of an inclusive global science-policy process combining major improvements to the present governance systems, including new incentives for international cooperation and coordination, with an ambitious scientific program to help anticipate threats and opportunities and integrate complex information regarding long-term issues. It would constitute a major step toward sustainability.
|
|
| 23. |
- Maury, R., et al.
(författare)
-
Hydrogen refuelling station calibration with a traceable gravimetric standard
- 2020
-
Ingår i: Flow Measurement and Instrumentation. - : Elsevier Ltd. - 0955-5986 .- 1873-6998. ; 74
-
Tidskriftsartikel (refereegranskat)abstract
- Of all the alternatives to hydrocarbon fuels, hydrogen offers the greatest long-term potential to radically reduce the many problems inherent in fuel used for transportation. Hydrogen vehicles have zero tailpipe emissions and are very efficient. If the hydrogen is made from renewable sources, such as nuclear power or fossil sources with carbon emissions captured and sequestered, hydrogen use on a global scale would produce almost zero greenhouse gas emissions and greatly reduce air pollutant emissions.The aim of this work is to realise a traceability chain for hydrogen flow metering in the range typical for fuelling applications in a wide pressure range, with pressures up to 875 bar (for Hydrogen Refuelling Station - HRS with Nominal Working Pressure of 700 bar) and temperature changes from −40 °C (pre-cooling) to 85 °C (maximum allowed vehicle tank temperature) in accordance with the worldwide accepted standard SAE J2601. Several HRS have been tested in Europe (France, Netherlands and Germany) and the results show a good repeatability for all tests. This demonstrates that the testing equipment works well in real conditions. Depending on the installation configuration, some systematic errors have been detected and explained. Errors observed for Configuration 1 stations can be explained by pressure differences at the beginning and end of fueling, in the piping between the Coriolis Flow Meter (CFM) and the dispenser: the longer the distance, the bigger the errors. For Configuration 2, where this distance is very short, the error is negligible.
|
|
| 24. |
|
|
| 25. |
|
|
