| 1. |
- Aad, G, et al.
(författare)
-
- 2015
-
swepub:Mat__t
|
|
| 2. |
- Schael, S., et al.
(författare)
-
Electroweak measurements in electron positron collisions at W-boson-pair energies at LEP
- 2013
-
Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 532:4, s. 119-244
-
Forskningsöversikt (refereegranskat)abstract
- Electroweak measurements performed with data taken at the electron positron collider LEP at CERN from 1995 to 2000 are reported. The combined data set considered in this report corresponds to a total luminosity of about 3 fb(-1) collected by the four LEP experiments ALEPH, DELPHI, 13 and OPAL, at centre-of-mass energies ranging from 130 GeV to 209 GeV. Combining the published results of the four LEP experiments, the measurements include total and differential cross-sections in photon-pair, fermion-pair and four-fermion production, the latter resulting from both double-resonant WW and ZZ production as well as singly resonant production. Total and differential cross-sections are measured precisely, providing a stringent test of the Standard Model at centre-of-mass energies never explored before in electron positron collisions. Final-state interaction effects in four-fermion production, such as those arising from colour reconnection and Bose Einstein correlations between the two W decay systems arising in WW production, are searched for and upper limits on the strength of possible effects are obtained. The data are used to determine fundamental properties of the W boson and the electroweak theory. Among others, the mass and width of the W boson, m(w) and Gamma(w), the branching fraction of W decays to hadrons, B(W -> had), and the trilinear gauge-boson self-couplings g(1)(Z), K-gamma and lambda(gamma), are determined to be: m(w) = 80.376 +/- 0.033 GeV Gamma(w) = 2.195 +/- 0.083 GeV B(W -> had) = 67.41 +/- 0.27% g(1)(Z) = 0.984(-0.020)(+0.018) K-gamma - 0.982 +/- 0.042 lambda(gamma) = 0.022 +/- 0.019. (C) 2013 Elsevier B.V. All rights reserved.
|
|
| 3. |
- Schael, S, et al.
(författare)
-
Precision electroweak measurements on the Z resonance
- 2006
-
Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
-
Forskningsöversikt (refereegranskat)abstract
- We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 4. |
- Le Roch, Sarah, et al.
(författare)
-
European survey on criteria of aesthetics for periodontal evaluation: The ESCAPE study
- 2019
-
Ingår i: Journal of Clinical Periodontology. - : Wiley. - 0303-6979 .- 1600-051X. ; 46:11, s. 1116-1123
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd Objective: The ESCAPE multicentre survey was designed to (a) compare the agreement of three relevant aesthetic scoring systems among different centres, and (b) evaluate the reproducibility of each question of the questionnaires. Materials and Methods: EFP centres (n=14) were involved in an e-survey. Forty-two participants (28 teachers, 14 postgraduate students) were asked to score the one-year aesthetic outcomes of photographs using the Before–After Scoring System (BASS), the Pink Esthetic Score (PES) and the Root coverage Esthetic Score (RES). Mean values of kappa statistics performed on each question were provided to resume global agreement of each method. Results: Between teachers, a difference of kappa≥0.41 (p=.01) was found for BASS (75%) and PES (57%). Similarly, RES (84%) and PES (57%) were different (p<.001). No difference was found between BASS (75%) and RES (84%). No difference was found between students, whatever the scoring system. Questions of each scoring system showed differences in their reproducibility. Conclusions: The outcomes of this study indicate that BASS and RES scoring systems are reproducible tools to evaluate aesthetic after root coverage therapies between different centres. Among the various variables, lack of scar, degree of root coverage, colour match and gingival margin that follows the CEJ show the best reliability.
|
|
| 5. |
- Lehman, S E, et al.
(författare)
-
Biocompliant Composite Au/pHEMA Plasmonic Scaffolds for 3D Cell Culture and Noninvasive Sensing of Cellular Metabolites
- 2020
-
Ingår i: Advanced Healthcare Materials. - : Wiley-VCH Verlag. - 2192-2640 .- 2192-2659.
-
Tidskriftsartikel (refereegranskat)abstract
- The field of 3D printing is an area of active research, with a substantial focus given to the design and construction of customized tools for applications in technology. There exists a particular need in these developing areas of opportunity for new multi-functional soft materials that are biologically compatible for the growth and directed culturing of cells. Herein, a composite material consisting of gold nanoparticles with useful plasmonic properties embedded within a highly hydrophilic poly-2-hydroxyethylmethacrylate matrix is described and characterized. This composite material serves dual functions as both host framework scaffold for cell lines such as pre-osteoblasts as well as a plasmonic biosensor for in situ measurements of living cells. The plasmonic properties of this system are characterized as a function of the material properties and related to compositional features of the material through a proposed light-directed mechanism. This chemistry provides a tunable, 3D printable plasmonic composite material of encapsulated gold nanoparticles in a biologically-compliant, acrylate-based hydrogel matrix. Surface-enhanced Raman scattering studies of 3D-microcultures supported by the scaffolds are carried out and the strong influence of perm-selective molecular diffusion in its analytical responses is established. Most notably, specific, largely hydrophilic, cellular metabolites are detected within the supported live cultures.
|
|
| 6. |
- Wang, C., et al.
(författare)
-
3D Particle-Free Printing of Biocompatible Conductive Hydrogel Platforms for Neuron Growth and Electrophysiological Recording
- 2021
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-301X .- 1616-3028. ; 31:14
-
Tidskriftsartikel (refereegranskat)abstract
- Electrically conductive 3D periodic microscaffolds are fabricated using a particle-free direct ink writing approach for use as neuronal growth and electrophysiological recording platforms. A poly (2-hydroxyethyl methacrylate)/pyrrole ink, followed by chemical in situ polymerization of pyrrole, enables hydrogel printing through nozzles as small as 1 µm. These conductive hydrogels can pattern complex 2D and 3D structures and have good biocompatibility with test cell cultures (≈94.5% viability after 7 days). Hydrogel arrays promote extensive neurite outgrowth of cultured Aplysia californica pedal ganglion neurons. This platform allows extracellular electrophysiological recording of steady-state and stimulated electrical neuronal activities. In summation, this 3D conductive ink printing process enables the preparation of biocompatible and micron-sized structures to create customized in vitro electrophysiological recording platforms.
|
|
| 7. |
|
|
| 8. |
- Li, Y., et al.
(författare)
-
Complex structural dynamics of nanocatalysts revealed in Operando conditions by correlated imaging and spectroscopy probes
- 2015
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- Understanding how heterogeneous catalysts change size, shape and structure during chemical reactions is limited by the paucity of methods for studying catalytic ensembles in working state, that is, in operando conditions. Here by a correlated use of synchrotron X-ray absorption spectroscopy and scanning transmission electron microscopy in operando conditions, we quantitatively describe the complex structural dynamics of supported Pt catalysts exhibited during an exemplary catalytic reaction-ethylene hydrogenation. This work exploits a microfabricated catalytic reactor compatible with both probes. The results demonstrate dynamic transformations of the ensemble of Pt clusters that spans a broad size range throughout changing reaction conditions. This method is generalizable to quantitative operando studies of complex systems using a wide variety of X-ray and electron-based experimental probes.
|
|
| 9. |
|
|
| 10. |
- Nelson, A. Z., et al.
(författare)
-
Designing and transforming yield-stress fluids
- 2019
-
Ingår i: Current opinion in solid state & materials science. - : Elsevier. - 1359-0286 .- 1879-0348. ; 23:5
-
Forskningsöversikt (refereegranskat)abstract
- We review progress in designing and transforming multi-functional yield-stress fluids and give a perspective on the current state of knowledge that supports each step in the design process. We focus mainly on the rheological properties that make yield-stress fluids so useful and the trade-offs which need to be considered when working with these materials. Thinking in terms of “design with” and “design of” yield-stress fluids motivates how we can organize our scientific understanding of this field. “Design with” involves identification of rheological property requirements independent of the chemical formulation, e.g. for 3D direct-write printing which needs to accommodate a wide range of chemistry and material structures. “Design of” includes microstructural considerations: conceptual models relating formulation to properties, quantitative models of formulation-structure-property relations, and chemical transformation strategies for converting effective yield-stress fluids to be more useful solid engineering materials. Future research directions are suggested at the intersection of chemistry, soft-matter physics, and material science in the context of our desire to design useful rheologically-complex functional materials.
|
|
| 11. |
- Petronico, Aaron, et al.
(författare)
-
Solid-Liquid Lithium Electrolyte Nanocomposites Derived from Porous Molecular Cages
- 2018
-
Ingår i: Journal of the American Chemical Society. - : AMER CHEMICAL SOC. - 0002-7863 .- 1520-5126. ; 140:24, s. 7504-7509
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate that solid-liquid nanocomposites derived from porous organic cages are effective lithium ion electrolytes at room temperature. A solid-liquid electrolyte nanocomposite (SLEN) fabricated from a LiTFSI/DME electrolyte system and a porous organic cage exhibits ionic conductivity on the order of 1 x 10(-3) S cm(-1). With an experimentally measured activation barrier of 0.16 eV, this composite is characterized as a superionic conductor. Furthermore, the SLEN displays excellent oxidative stability up to 4.7 V vs Li/Li+. This simple three-component system enables the rational design of electrolytes from tunable discrete molecular architectures.
|
|
| 12. |
- Phillips, Helen R. P., et al.
(författare)
-
Global distribution of earthworm diversity
- 2019
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 366:6464, s. 480-
-
Tidskriftsartikel (refereegranskat)abstract
- Soil organisms, including earthworms, are a key component of terrestrial ecosystems. However, little is known about their diversity, their distribution, and the threats affecting them. We compiled a global dataset of sampled earthworm communities from 6928 sites in 57 countries as a basis for predicting patterns in earthworm diversity, abundance, and biomass. We found that local species richness and abundance typically peaked at higher latitudes, displaying patterns opposite to those observed in aboveground organisms. However, high species dissimilarity across tropical locations may cause diversity across the entirety of the tropics to be higher than elsewhere. Climate variables were found to be more important in shaping earthworm communities than soil properties or habitat cover. These findings suggest that climate change may have serious implications for earthworm communities and for the functions they provide.
|
|
| 13. |
- Reintam Blaser, A., et al.
(författare)
-
Incidence, diagnosis, management and outcome of acute mesenteric ischaemia: a prospective, multicentre observational study (AMESI Study)
- 2024
-
Ingår i: Critical Care. - : BioMed Central (BMC). - 1364-8535 .- 1466-609X. ; 28:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The aim of this multicentre prospective observational study was to identify the incidence, patient characteristics, diagnostic pathway, management and outcome of acute mesenteric ischaemia (AMI). Methods: All adult patients with clinical suspicion of AMI admitted or transferred to 32 participating hospitals from 06.06.2022 to 05.04.2023 were included. Participants who were subsequently shown not to have AMI or had localized intestinal gangrene due to strangulating bowel obstruction had only baseline and outcome data collected. Results: AMI occurred in 0.038% of adult admissions in participating acute care hospitals worldwide. From a total of 705 included patients, 418 patients had confirmed AMI. In 69% AMI was the primary reason for admission, while in 31% AMI occurred after having been admitted with another diagnosis. Median time from onset of symptoms to hospital admission in patients admitted due to AMI was 24 h (interquartile range 9-48h) and time from admission to diagnosis was 6h (1–12 h). Occlusive arterial AMI was diagnosed in 231 (55.3%), venous in 73 (17.5%), non-occlusive (NOMI) in 55 (13.2%), other type in 11 (2.6%) and the subtype could not be classified in 48 (11.5%) patients. Surgery was the initial management in 242 (58%) patients, of which 59 (24.4%) underwent revascularization. Endovascular revascularization alone was carried out in 54 (13%), conservative treatment in 76 (18%) and palliative care in 46 (11%) patients. From patients with occlusive arterial AMI, revascularization was undertaken in 104 (45%), with 40 (38%) of them in one site admitting selected patients. Overall in-hospital and 90-day mortality of AMI was 49% and 53.3%, respectively, and among subtypes was lowest for venous AMI (13.7% and 16.4%) and highest for NOMI (72.7% and 74.5%). There was a high variability between participating sites for most variables studied. Conclusions: The overall incidence of AMI and AMI subtypes varies worldwide, and case ascertainment is challenging. Pre-hospital delay in presentation was greater than delays after arriving at hospital. Surgery without revascularization was the most common management approach. Nearly half of the patients with AMI died during their index hospitalization. Together, these findings suggest a need for greater awareness of AMI, and better guidance in diagnosis and management. Trial registration: NCT05218863 (registered 19.01.2022).
|
|
| 14. |
- Wang, L.-L., et al.
(författare)
-
Origin of bulklike structure and bond length disorder of Pt37 and Pt6Ru31 clusters on carbon : Comparison of theory and experiment
- 2006
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 128:1, s. 131-142
-
Tidskriftsartikel (refereegranskat)abstract
- We describe a theoretical analysis of the structures of self-organizing nanoparticles formed by Pt and Ru-Pt on carbon support. The calculations provide insights into the nature of these metal particle systems-ones of current interest for use as the electrocatalytic materials of direct oxidation fuel cells- and clarify complex behaviors noted in earlier experimental studies. With clusters deposited via metalloorganic Pt or PtRu5 complexes, previous experiments [Nashner et al. J. Am. Chem. Soc. 1997, 119, 7760, Nashner et al. J. Am. Chem. Soc. 1998, 120, 8093, Frenkel et al. J. Phys. Chem. B 2001, 105, 12689] showed that the Pt and Pt-Ru based clusters are formed with fcc(111)-stacked cuboctahedral geometry and essentially bulklike metal-metal bond lengths, even for the smallest (few atom) nanoparticles for which the average coordination number is much smaller than that in the bulk, and that Pt in bimetallic [PtRu5] clusters segregates to the ambient surface of the supported nanoparticles. We explain these observations and characterize the cluster structures and bond length distributions using density functional theory calculations with graphite as a model for the support. The present study reveals the origin of the observed metal-metal bond length disorder, distinctively different for each system, and demonstrates the profound consequences that result from the cluster/carbon-support interactions and their key role in the structure and electronic properties of supported metallic nanoparticles. © 2006 American Chemical Society.
|
|
