| 1. |
- Akkoyun, S., et al.
(författare)
-
AGATA - Advanced GAmma Tracking Array
- 2012
-
Ingår i: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. - : Elsevier BV. - 0168-9002 .- 0167-5087 .- 1872-9576. ; 668, s. 26-58
-
Tidskriftsartikel (refereegranskat)abstract
- The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation γ-ray spectrometer. AGATA is based on the technique of γ-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a γ ray deposits its energy within the detector volume. Reconstruction of the full interaction path results in a detector with very high efficiency and excellent spectral response. The realisation of γ-ray tracking and AGATA is a result of many technical advances. These include the development of encapsulated highly segmented germanium detectors assembled in a triple cluster detector cryostat, an electronics system with fast digital sampling and a data acquisition system to process the data at a high rate. The full characterisation of the crystals was measured and compared with detector- response simulations. This enabled pulse-shape analysis algorithms, to extract energy, time and position, to be employed. In addition, tracking algorithms for event reconstruction were developed. The first phase of AGATA is now complete and operational in its first physics campaign. In the future AGATA will be moved between laboratories in Europe and operated in a series of campaigns to take advantage of the different beams and facilities available to maximise its science output. The paper reviews all the achievements made in the AGATA project including all the necessary infrastructure to operate and support the spectrometer. © 2011 Elsevier B.V. All rights reserved.
|
|
| 2. |
- Warr, N., et al.
(författare)
-
The Miniball spectrometer
- 2013
-
Ingår i: European Physical Journal A. Hadrons and Nuclei. - : Springer Science and Business Media LLC. - 1434-6001. ; 49:3
-
Tidskriftsartikel (refereegranskat)abstract
- The Miniball germanium detector array has been operational at the REX (Radioactive ion beam EXperiment) post accelerator at the Isotope Separator On-Line facility ISOLDE at CERN since 2001. During the last decade, a series of successful Coulomb excitation and transfer reaction studies have been performed with this array, utilizing the unique and high-quality radioactive ion beams which are available at ISOLDE. In this article, an overview is given of the technical details of the full Miniball setup, including a description of the.-ray and particle detectors, beam monitoring devices and methods to deal with beam contamination. The specific timing properties of the REX-ISOLDE facility are highlighted to indicate the sensitivity that can be achieved with the full Miniball setup. The article is finalized with a summary of some physics highlights at REX-ISOLDE and the utilization of the Miniball germanium detectors at other facilities.
|
|
| 3. |
- Lieder, R M, et al.
(författare)
-
Gamma-ray tracking arrays
- 2001
-
Ingår i: PROGRESS IN PARTICLE AND NUCLEAR PHYSICS, VOL 46. ; , s. 399-407
-
Konferensbidrag (refereegranskat)abstract
- The next generation of 4 pi arrays for high-precision gamma -ray spectroscopy will involve "gamma -ray tracking front-end on digital signal processing techniques, which allows to extract energy, timing and spatial information on the interactions of a gamma -ray in the Ge detector by pulse shape analysis of its signals. Utilizing the information on the positions of the interaction points and the energies released at each point the tracks of the gamma -rays in a Ge shell can be reconstructed in three dimensions.
|
|
| 4. |
- Stefanescu, I., et al.
(författare)
-
Coulomb Excitation of 68,70Cu: First Use of Postaccelerated Isomeric Beams
- 2007
-
Ingår i: Physical Review Letters. ; 98
-
Tidskriftsartikel (refereegranskat)abstract
- We report on the first low-energy Coulomb excitation measurements with radioactive Ipi=6- beams of odd-odd nuclei 68,70Cu. The beams were produced at ISOLDE, CERN and were post-accelerated by REX-ISOLDE to 2.83 MeV/nucleon. gamma rays were detected with the MINIBALL spectrometer. The 6- beam was used to study the multiplet of states (3-, 4-, 5-, 6-) arising from the pi2p3/2nu1g9/2 configuration. The 4- state of the multiplet was populated via Coulomb excitation and the B(E2;6--->4-) value was determined in both nuclei. The results obtained illustrate the fragile stability of the Z=28 shell and N=40 subshell closures. A comparison with large-scale shell-model calculations using the 56Ni core shows the importance of the proton excitations across the Z=28 shell gap to the understanding of the nuclear structure in the neutron-rich nuclei with N[approximate]40.
|
|
| 5. |
- Petts, A., et al.
(författare)
-
Lifetime measurements and coulomb excitation of light Hg nuclei
- 2009
-
Ingår i: Capture Gamma-Ray Spectroscopy and Related Topics. - : American Institute of Physics (AIP). - 9780735406230 ; , s. 414-418
-
Konferensbidrag (refereegranskat)abstract
- Two complementary experimental programs have taken place to investigate the origin and evolution of shape coexistence in the light mercury region. Recoil Distance Doppler-shift measurements were performed at the University of Jyväskylä utilizing the Köln plunger device in conjunction with the JUROGAM + RITU + GREAT setup. In addition, Coulomb excitation measurements of 184,186,188Hg were performed at REX-ISOLDE using the MINIBALL Ge-detector array. The results of the lifetime measurements of the yrast states up to Iπ = 10+ in 182Hg are reported. Preliminary analysis of the Coulomb excitation data is also discussed.
|
|
| 6. |
- Lieder, RM, et al.
(författare)
-
Development of gamma-ray tracking detectors
- 2001
-
Ingår i: ACTA PHYSICA POLONICA B. - : ACTA PHYSICA POLONICA B, JAGELLONIAN UNIV, INST PHYSICS. - 0587-4254. ; 32:9, s. 2395-2401
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The next generation of 4 pi arrays for high-precision gamma -ray spectroscopy AGATA will consist of gamma -ray tracking detectors. They represent high-fold segmented Ge detectors and a front-end electronics, based on digital signal processing techniques,
|
|
| 7. |
- Lieder, RM, et al.
(författare)
-
Gamma-ray tracking arrays
- 2001
-
Ingår i: PROGRESS IN PARTICLE AND NUCLEAR PHYSICS. - : ELSEVIER SCIENCE BV. - 0146-6410. ; 46, s. 399-407
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The next generation of 4 pi arrays for high-precision gamma -ray spectroscopy will involve "gamma -ray tracking front-end on digital signal processing techniques, which allows to extract energy, timing and spatial information on the interactions of a gamm
|
|
| 8. |
- Lieder, RM, et al.
(författare)
-
The TMR network project "Development of gamma-ray tracking detectors"
- 2001
-
Ingår i: NUCLEAR PHYSICS A. - : ELSEVIER SCIENCE BV. - 0375-9474. ; 682, s. 279C-285C
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The next generation of 4 pi arrays for high-precision gamma -ray spectroscopy will involve gamma -ray tracking detectors. They consist of high-fold segmented Ge detectors and a front-end electronics, based on new digital signal processing techniques, whic
|
|
| 9. |
- Recchia, F, et al.
(författare)
-
Position resolution of the prototype AGATA triple-cluster detector from an in-beam experiment
- 2009
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 604:3, s. 555-562
-
Tidskriftsartikel (refereegranskat)abstract
- AGATA belongs to a new generation of gamma-ray detector arrays for nuclear spectroscopy at present in its final stage of development. The detectors of these new arrays will be based on 36-fold electronically segmented coaxial germanium diodes operated in position sensitive mode. An in-beam test of the AGATA prototype triple cluster detector was carried out with the purpose of demonstrating the feasibility of such detectors and in order to measure the most sensitive parameters for their overall performance. An inverse kinematics reaction was performed, using a Ti-48 beam at an energy of 100MeV, impinging on a deuterated titanium tat-get. The results from the analysis of the experimental data, compared with the predictions of Monte Carlo Simulations, give an estimation of the position sensitivity of these detectors of about 5 mm FWHM, consistent with the specifications required. (C) 2009 Elsevier B.V. All rights reserved.
|
|
| 10. |
- Golubev, Pavel, et al.
(författare)
-
The Lund-York-Cologne Calorimeter (LYCCA): Concept, Design and Prototype Developments for a FAIR-NUSTAR Detector System to Discriminate Relativistic Heavy-ion Reaction Products
- 2013
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002. ; 723, s. 55-66
-
Tidskriftsartikel (refereegranskat)abstract
- The concept, design and prototype developments for the Lund-York-Cologne CAlorimeter (LYCCA) is presented. LYCCA is a modular device for the NUclear STructure, Astrophysics and Reactions (NUSTAR) science pillar of the Facility for Antiproton and Ion Research (FAIR) at Darmstadt, Germany. LYCCA is designed to discriminate heavy ions produced in nuclear reactions induced by relativistic radioactive ion beams. Measurements of energy loss, total energy, and time-of-flight allow the derivation of proton number, Z, and mass number, A, of the reaction products. LYCCA-inherent tracking of the flight paths of the reaction products enables coincident High-resolution in-beam gamma-ray SPECtroscopy (HISPEC) of atomic nuclei far from the line of beta-stability. (C) 2013 Elsevier B.V. All rights reserved.
|
|
| 11. |
- Kyprianidis, Konstantinos G., et al.
(författare)
-
EVA : A Tool for EnVironmental Assessment of Novel Propulsion Cycles
- 2008
-
Ingår i: <em><em></em></em>ASME Turbo Expo 2008: Power for Land, Sea, and AirVolume 2: Controls, Diagnostics and Instrumentation; Cycle Innovations; Electric PowerBerlin, Germany, June 9–13, 2008. - 9780791843123 - 0791838242 ; , s. 547-556
-
Konferensbidrag (refereegranskat)abstract
- This paper presents the development of a tool for EnVironmental Assessment (EVA) of novel propulsion cycles implementing the Technoeconomical Environmental and Risk Analysis (TERA) approach. For nearly 3 decades emissions certification and legislation has been mainly focused on the landing and take-off cycle. Exhaust emissions measurements of NOx, CO and unburned hydrocarbons are taken at Sea Level Static (SLS) conditions for 4 different power settings (idle, descent, approach and take-off) and are consecutively used for calculating the total emissions during the ICAO landing and take-off cycle. With the global warming issue becoming ever more important, stringent emissions legislation is soon to follow, focusing on all flight phases of an aircraft. Unfortunately, emissions measurements at altitude are either extremely expensive, as in the case of altitude test facility measurements, or unrealistic, as in the case of direct in flight measurements. Compensating for these difficulties, various existing methods can be used to estimate emissions at altitude from ground measurements. Such methods, however, are of limited help when it comes to assessing novel propulsion cycles or existing engine configurations with no SLS measurements available. The authors are proposing a simple and fast method for the calculation of SLS emissions, mainly implementing ICAO exhaust emissions data, corrections for combustor inlet conditions and technology factors. With the SLS emissions estimated, existing methods may be implemented to calculate emissions at altitude. The tool developed couples emissions predictions and environmental models together with engine and aircraft performance models in order to estimate the total emissions and Global Warming Potential of novel engine designs during all flight phases (i.e. the whole flight cycle). The engine performance module stands in the center of all information exchange. In this study, EVA and the described emissions prediction methodology have been used for the preliminary design analysis of three spool high bypass ratio turbofan engines. The capability of EVA to radically explore the design space available in novel engine configurations, while accounting for fuel burn and global warming potential during the whole flight cycle of an aircraft, is illustrated.
|
|
| 12. |
- Pascovici, Daniele S., et al.
(författare)
-
Weibull Distributions Applied to Cost and Risk Analysis for Aero Engines
- 2008
-
Ingår i: <em><em>Proc. ASME</em>.</em> 43123; Volume 2: Controls, Diagnostics and Instrumentation; Cycle Innovations; Electric Power. GT2008-51060. - 9780791843123 - 0791838242 ; , s. 681-690
-
Konferensbidrag (refereegranskat)abstract
- This paper presents the use of Weibull formulation to the life analysis of different parts of the engine in order to estimate the cost of maintenance, the direct operating costs (DOC) and net present cost (NPC) of future type turbofan engines. The Weibull distribution is often used in the field of life data analysis due to its flexibility—it can mimic the behavior of other statistical distributions such as the normal and the exponential. The developed economic model is composed of three modules: a lifing module, an economic module and a risk module. The lifing module estimates the life of the high pressure turbine blades through the analysis of creep and fatigue over a full working cycle of the engine. The value of life calculated by the lifing is then taken as the baseline distribution to calculate the life of other important modules of the engine using the Weibull approach. Then the lower of the values of life of all the distributions is taken as time between overhaul (TBO), and used into the economic module calculations. The economic module uses the TBO together with the cost of labour and the cost of the engine (needed to determine the cost of spare parts) to estimate the cost of maintenance and DOC of the engine. In the present work five Weibull distributions are used for five important sources of interruption of the working life of the engine: Combustor, Life Limited Parts (LLP), High Pressure Compressor (HPC), General breakdowns and High Pressure Turbine (HPT). The risk analysis done in this work shows the impact of the breakdown of different parts of the engine on the NPC and DOC, the importance that each module of the engine has in its life, and how the application of the Weibull theory can help us in the risk assessment of future aero engines. A detailed explanation of the economic model is done in two other works (Pascovici et. al. [6] and Pascovici et. al. [7]), so in this paper only a general overview is done.
|
|
| 13. |
- Stahl, K., et al.
(författare)
-
Search for proton emission of the isomeric 10+ state in 54Ni
- 2020
-
Ingår i: European Physical Journal A. - : Springer Science and Business Media LLC. - 1434-6001 .- 1434-601X. ; 56:1
-
Tidskriftsartikel (refereegranskat)abstract
- Several experiments were conducted at the 10 MV Van-de-Graaff tandem accelerator at the Institute of Nuclear Physics, Cologne, to detect proton emission from the isomeric 6457-keV 10+ state in 54Ni. Excitation functions for two fusion–evaporation reactions were measured to maximise the population of the rare two-neutron evaporation channel from a 56Ni compound nucleus. The search for delayed proton emission was based on the 28Si(28Si,2n)54Ni reaction at a beam energy of 70 MeV. For this reaction, a cross-section limit for the population of the 10+ state in 54Ni and its proton-decay branch was determined to be σ< 22 nb.
|
|
| 14. |
- Söderström, Pär-Anders, et al.
(författare)
-
Interaction position resolution simulations and in-beam measurements of the AGATA HPGe detectors
- 2011
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 638:1, s. 96-109
-
Tidskriftsartikel (refereegranskat)abstract
- The interaction position resolution of the segmented HPGe detectors of an AGATA triple cluster detector has been studied through Monte Carlo simulations and in an in-beam experiment. A new method based on measuring the energy resolution of Doppler-corrected γ-ray spectra at two different target to detector distances is described. This gives the two-dimensional position resolution in the plane perpendicular to the direction of the emitted γ-ray. The γ-ray tracking was used to determine the full energy of the γ-rays and the first interaction point, which is needed for the Doppler correction. Five different heavy-ion induced fusion-evaporation reactions and a reference reaction were selected for the simulations. The results of the simulations show that the method works very well and gives a systematic deviation of in the FWHM of the interaction position resolution for the γ-ray energy range from 60 keV to 5 MeV. The method was tested with real data from an in-beam measurement using a 30Si beam at 64 MeV on a thin 12C target. Pulse-shape analysis of the digitized detector waveforms and γ-ray tracking was performed to determine the position of the first interaction point, which was used for the Doppler corrections. Results of the dependency of the interaction position resolution on the γ-ray energy and on the energy, axial location and type of the first interaction point, are presented. The FWHM of the interaction position resolution varies roughly linearly as a function of γ-ray energy from 8.5 mm at 250 keV to 4 mm at 1.5 MeV, and has an approximately constant value of about 4 mm in the γ-ray energy range from 1.5 to 4 MeV.
|
|
