| 1. |
- Dannetun, Per, et al.
(författare)
-
Proceedings of the International Conference on Science and Technology of Synthetic Metals The chemical and electronic structure of the interface between aluminum and conjugated polymers or molecules
- 1993
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 55:1, s. 212-217
-
Tidskriftsartikel (refereegranskat)abstract
- The interaction between aluminum and α-ω-diphenyltetradecaheptaenee (DP7), α-sexithienyl (6T), and poly(p-phenylenevinylene) (PPV), respectively have been studied using both X-ray Photoelectron Spectroscopy (XPS) and Ultraviolet Photoelectron Spectroscopy (UPS). The UPS valence band spectra, are interpreted with the help of quantum chemical calculations based upon Modified Neglect of Diatomic Overlap (MNDO), Valence Effective Hamitonian (VEH) and ab initio Hartree-Fock methods. DP7 is a model molecule for polyacetylene, while 6T is a model molecule (an oligomer) of polythiophene. The results indicate that aluminum reacts strongly with the surfaces of all of the materials studied. The π-electronic structure of each material was strongly modified. Furthermore, aluminum reacts preferentially with the polyene partof DP7, with the vinylene part of PPV, and with the α-carbons of the thiophene nits of 6T.
|
|
| 2. |
- Dannetun, Per, et al.
(författare)
-
The chemical and electronic structure of the interface between aluminum and polythiophene semiconductors
- 1993
-
Ingår i: Journal of Chemical Physics. - : American Institute of Physics (AIP). - 0021-9606 .- 1089-7690. ; 99:1, s. 664-672
-
Tidskriftsartikel (refereegranskat)abstract
- We have investigated the chemical nature and the electronic structure of the interface between a low work function metal,aluminum, and a conjugated polymersemiconductor, polythiophene. We have studied the initial stages of the interface formation by depositing the metal onto the surface of a polymer film. Charge transfer processes between the metal and the polymer are analyzed using core‐level x‐ray photoelectron spectroscopy (XPS); the evolution upon metallization of the valence electronic levels directly related to the polymerelectronic structure is followed with ultraviolet photoelectron spectroscopy (UPS). With these techniques, we investigate the deposition of aluminum on two polythiophene systems (i) the alkyl‐substituted poly‐3‐octylthiophene and (ii) the α‐sexithiophene oligomer. The experimental data are compared to the results of a recent quantum chemical study on model systems consisting of thiophene oligomers (up to sexithiophene) interacting with a few Al atoms. The interaction of polythiophene with Al atoms is found to modify dramatically the structure of the conjugated backbone, as strong carbon–aluminum bonds are formed in the α positions of the thiophene rings. A large charge transfer takes place from the Al atoms to the polymer chain, and the upper π levels of the polymer are strongly affected. The metallization is contrasted to the doping of conjugated polymers with alkali metals
|
|
| 3. |
- Sanchez-Carrera, R.S., et al.
(författare)
-
Vibronic coupling in the ground and excited states of oligoacene cations
- 2006
-
Ingår i: Journal of Physical Chemistry B. - : American Chemical Society (ACS). - 1520-6106 .- 1520-5207. ; 110:38, s. 18904-18911
-
Tidskriftsartikel (refereegranskat)abstract
- The vibrational coupling in the ground and excited states of positively charged naphthalene, anthracene, tetracene, and pentacene molecules is studied on the basis of a joint experimental and theoretical study of ionization spectra using high-resolution gas-phase photoelectron spectroscopy and first-principles correlated quantum-mechanical calculations. Our theoretical and experimental results reveal that, while the main contribution to relaxation energy in the ground state of oligoacene systems comes from high-energy vibrations, the excited-state relaxation energies show a significant redistribution toward lower-frequency vibrations. A direct correlation is found between the nature of the vibronic interaction and the pattern of the electronic state structure. © 2006 American Chemical Society.
|
|
| 4. |
- Bröms, P., et al.
(författare)
-
Optical absorption studies of sodium doped poly(cyanoterephthalylidene)
- 1994
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 67:1-3, s. 93-96
-
Tidskriftsartikel (refereegranskat)abstract
- The effects of doping poly(cyanoterephthalylidene) with sodium in ultrahighvacuum been studied by optical absorption spectroscopy. Upon doping, new optical transitions are observed within the bandgap; the characteristics of these transitions are consistent with the formation of bipolarons. The optical absorption results are confirmed by direct measurements of the doping-induced gap states using ultraviolet photoelectron spectroscopy.
|
|
| 5. |
- Cacialli, F., et al.
(författare)
-
Synthesis and characterisation of poly(distyrylbenzene-block-hexa(ethylene oxide)) and its fluorinated analogue - Two new block copolymers and their application in electroluminescent devices
- 2002
-
Ingår i: Polymer. - 0032-3861 .- 1873-2291. ; 43:12, s. 3555-3561
-
Tidskriftsartikel (refereegranskat)abstract
- Two new soluble block copolymers are reported in which chromophores and hexa(ethylene oxide) units alternate along the polymer backbone. In polymer 1 the chromophore was the distyrylbenzene unit. The polymer was synthesised via the Wittig reaction and the ionization potential of 5.4 ± 0.2 eV was measured by cyclic voltammetry and photoelectron spectroscopy. Polymer 1 showed a high solid-state photoluminescence efficiency (34%) and was used to make efficient (0.5 cd/A) light emitting diodes (LEDs). Polymer 1 was also used in light emitting cells, these showed luminescence in reverse bias and a reduced turn-on voltage compared to the LEDs. Polymer 2, in which the chromophore was dodecafluoro-distryrylbenzene, was prepared via the Horner-Wittig reaction and showed an ionization potential of 6.25 ± 0.15 eV and a solid-state photoluminescence efficiency of 17%. It was used as electron-conducting layer in a LED but failed to give significant electroluminescence. The optical energy gap for both polymers was 3.0 eV. © 2002 Published by Elsevier Science Ltd.
|
|
| 6. |
- Crispin, Xavier, et al.
(författare)
-
Characterization of the interface dipole at organic/metal interfaces
- 2002
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 124:27, s. 8131-8141
-
Tidskriftsartikel (refereegranskat)abstract
- In organics-based (opto)electronic devices, the interface dipoles formed at the organic/metal interfaces play a key role in determining the barrier for charge (hole or electron) injection between the metal electrodes and the active organic layers. The origin of this dipole is rationalized here from the results of a joint experimental and theoretical study based on the interaction between acrylonitrile, a p-conjugated molecule, and transition metal surfaces (Cu, Ni, and Fe). The adsorption of acrylonitrile on these surfaces is investigated experimentally by photoelectron spectroscopies, while quantum mechanical methods based on density functional theory are used to study the systems theoretically. It appears that the interface dipole formed at an organic/metal interface can be divided into two contributions: (i) the first corresponds to the "chemical" dipole induced by a partial charge transfer between the organic layers and the metal upon chemisorption of the organic molecules on the metal surface, and (ii) the second relates to the change in metal surface dipole because of the modification of the metal electron density tail that is induced by the presence of the adsorbed organic molecules. Our analysis shows that the charge injection barrier in devices can be tuned by modulating various parameters: the chemical potential of the bare metal (given by its work function), the metal surface dipole, and the ionization potential and electron affinity of the organic layer.
|
|
| 7. |
- Crispin, Xavier, et al.
(författare)
-
Chemisorption of acrylonitrile on the Cu(100) surface: A local density functional study
- 1999
-
Ingår i: Journal of Chemical Physics. - : American Institute of Physics (AIP). - 0021-9606 .- 1089-7690. ; 111:7, s. 3237-3251
-
Tidskriftsartikel (refereegranskat)abstract
- The possibility of chemically grafting polyacrylonitrile onto transition metal electrodes via electropolymerization leads to promising applications in the fields of corrosion protection or metal surface functionalization. The initial step of the electrografting mechanism is the adsorption of the acrylonitrile monomer on the metal surface from solution. Here, we investigate theoretically this adsorption process on the copper (100) surface; Density Functional Theory is used in the Local Spin Density approximation to describe the electronic and structural properties of acrylonitrile adsorbed on copper clusters. The chemisorption of acrylonitrile on the copper surface is confirmed experimentally via X-Ray Photoelectron Spectroscopy. The thermodynamic characteristics of the adsorption process are also studied via statistical mechanics. Finally, determining the influence of the copper cluster size on the adsorption of acrylonitrile allows to extrapolate the properties of the acrylonitrile/Cu(100) surface from those of acrylonitrile/copper clusters. (C) 1999 American Institute of Physics. [S0021-9606(99)70231-X].
|
|
| 8. |
- Crispin, Xavier, 1972-, et al.
(författare)
-
Electronic delocalization in discotic liquid crystals : A joint experimental and theoretical study
- 2004
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 126:38, s. 11889-11899
-
Tidskriftsartikel (refereegranskat)abstract
- Discotic liquid crystals emerge as very attractive materials for organic-based (opto)electronics as they allow efficient charge and energy transport along self-organized molecular columns. Here, angle-resolved photoelectron spectroscopy (ARUPS) is used to investigate the electronic structure and supramolecular organization of the discotic molecule, hexakis(hexylthio)diquinoxalino[2,3-a:2′,3′-c]phenazine, deposited on graphite. The ARUPS data reveal significant changes in the electronic properties when going from disordered to columnar phases, the main feature being a decrease in ionization potential by 1.8 eV following the appearance of new electronic states at low binding energy. This evolution is rationalized by quantum-chemical calculations performed on model stacks containing from two to six molecules, which illustrate the formation of a quasi-band structure with Bloch-like orbitals delocalized over several molecules in the column. The ARUPS data also point to an energy dispersion of the upper π-bands in the columns by some 1.1 eV, therefore highlighting the strongly delocalized nature of the π-electrons along the discotic stacks.
|
|
| 9. |
- Crispin, Xavier, et al.
(författare)
-
Understanding the initial stages of polymer grafting on metals : A photoelectron spectroscopy study of acrylonitrile adsorption on transition metal surfaces
- 2001
-
Ingår i: Journal of Electron Spectroscopy and Related Phenomena. - 0368-2048 .- 1873-2526. ; 121:1-3, s. 57-74
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray and UV photoelectron spectroscopies show that acrylonitrile is chemisorbed on iron, nickel and copper polycrystalline surfaces via the carbon and nitrogen atoms. Depending on the conditions used, different adsorption geometries are found. The molecules can either be adsorbed flat on the surface and chemically bound by a (2pp)-(3d/4s) overlap via both the C=C double bond and the C=N nitrile group or they can be adsorbed perpendicular to the surface via a covalent interaction between the nitrogen lone pair and the 3d-4s levels of the metals. Analysis of the XPS data obtained on molecular mono-layers chemisorbed on metal surfaces emphasizes the importance of initial-state effects (charge transfer upon chemisorption, contribution of the metal surface dipole) and final-state effects (metal screening and polarization effect within the mono-layer). The correlation between the XPS and UPS data illustrates the importance of the metal surface dipole in understanding the workfunction changes upon molecular adsorption on metal surfaces. © 2001 Elsevier Science B.V. All rights reserved.
|
|
| 10. |
- Dannetun, Per, et al.
(författare)
-
Interface formation between poly(2,5-diheptyl-p-phenylenevinylene) and calcium : implications for light-emitting diodes
- 1994
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 67:1-3, s. 133-136
-
Tidskriftsartikel (refereegranskat)abstract
- The early stages of metal/polymer interface formation between calcium and poly(2,5-diheptyl-p-phenylenevinylene) (PDHPV) have been studied using both X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy. Charge transfer is observed from the metal atoms to the polymer; as a result the calcium atoms at the interface are ionic, and negative bipolarons appear as the charge-carrying species on the polymer chains. This n-type doping of PDHPV by calcium leads to the appearance of new electronic states in the polymer bandgap. The calcium atoms appear to diffuse into the near surface region of the polymer, rather than forming a well-defined overlayer on the organic films.
|
|
| 11. |
- Dannetun, Per, et al.
(författare)
-
New Results on Metal-Polymer Interfaces
- 1993
-
Ingår i: Molecular Crystals and Liquid Crystals. - : Taylor & Francis. - 1542-1406 .- 1563-5287. ; 228:1, s. 43-48
-
Tidskriftsartikel (refereegranskat)abstract
- New results on studies of the early stages of formation of the aluminum-poly(p-phenylenevinylene) interface are presented.
|
|
| 12. |
- Dannetun, Per, et al.
(författare)
-
Reactions of low work function metals Na, Al, and Ca on α,ω-€diphenyltetradecaheptaene. Implications for metal/polymer interfaces
- 1994
-
Ingår i: Journal of Chemical Physics. - : American Institute of Physics (AIP). - 0021-9606 .- 1089-7690. ; 100:9, s. 6765-6771
-
Tidskriftsartikel (refereegranskat)abstract
- The interactions between different low work function metals aluminium,calcium and sodium, and α,ω‐diphenyltetradecaheptaene, a model molecule for certain conjugated polymers, have been investigated using both x‐ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy. The spectra are interpreted with the help of the results of quantum chemical calculations performed within the local spin density (LSD) approximation methodology. The metals are found to interact with the conjugated system in very different ways. Aluminium forms a covalent bond, which strongly modifies the π‐electronic structure of the conjugated molecule, while both the sodium and the calcium atoms act as doping agents, inducing new states in the otherwise forbidden bandgap. These new gap states can be viewed as a soliton–antisoliton pair for the Na/DP7 and a bipolaronic‐like defect for Ca/DP7.
|
|
| 13. |
- Dannetun, P., et al.
(författare)
-
The eletronic structure of emeraldine doped in situ from HCl in the gas phase as studied by photoelectron spectroscopy
- 1991
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 41:1-2, s. 645-648
-
Tidskriftsartikel (refereegranskat)abstract
- The chemical and electronic structure of spin-coated films of polyaniline in the emeraldine state, treated in-situ with HCl in the gas phase, have been studied for the first time by means of X-ray Photoelectron Spectroscopy (XPS) and Ultra-violet Photoelectron Spectroscopy (UPS). Ultra thin films, of about several hundreds of Ångströms thickness, were spin-coated from a solution of chemically prepared emeraldine in NMP, onto substrates of aluminum or silicon. The salt forms were prepared both by (a) “wet†doping in 1M HCl and (b) the in-situ treatment of the films with HCl in the gas phase. With XPS three different types of chlorine have been observed, two ionic and one covalent. With UPS the valence band spectra of the doped and undoped state, are studied.
|
|
| 14. |
- De Cupere, V., et al.
(författare)
-
Effect of interfaces on the alignment of a discotic liquid-crystalline phthalocyanine
- 2006
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 22:18, s. 7798-7806
-
Tidskriftsartikel (refereegranskat)abstract
- This paper deals with the influence of the nature and number of solid interfaces on the alignment of the columns in a semiconducting discotic liquid crystal. The solid substrates have been characterized in terms of their roughness and surface energy. The alignment of the discotic liquid crystal columns on these substrates has been determined by optical microscopy under crossed polarizers and by tapping-mode atomic force microscopy. The nature of the substrates has negligible influence on the alignment. The key parameter is the confinement imposed to the film. These surprising observations are explained by the antagonist alignment role of gas and solid interfaces. © 2006 American Chemical Society.
|
|
| 15. |
- Fredriksson, C., et al.
(författare)
-
Theoretical studies of the aluminum/poly(p-phenylene vinylene) interface
- 1993
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 57:2, s. 4632-4637
-
Tidskriftsartikel (refereegranskat)abstract
- A molecular quantum chemical approach is used to study the aluminum on PPV (Poly(p-Phenylene Vinylene)) interface. We focus on modifications to the chemical and electronic structure of the polymer upon interaction with a submonolayer of aluminum. A model system, trans-stilbene, is taken to investigate the nature of the Al-PPV bonding. Energetically favorable conformations are then used as prototypes to study the evolution of the electronic structure as modified by the reaction with aluminum. Results at the ab initio Hartree-Fock level indicates that Al atoms react with the vinylene linkage rather than the phenyl groups at early stages of interface formation.
|
|
| 16. |
- Fredriksson, C., et al.
(författare)
-
Theoretical studies of the aluminum/trans-polyacetylene interface : Calculations of model systems and comparison to experiment
- 1993
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 57:2-3, s. 4590-4595
-
Tidskriftsartikel (refereegranskat)abstract
- The interaction between Al atoms and trans-polyacetylene has been studied quantum chemically at the ab initio Hartree-Fock level using oligomeric model systems. Investigations of the Al-polyacetylene bonding and modifications to the chemical and electronic structure of model systems for polyacetylene upon interaction with Al atoms are reported. The density-of-states is calculated for a polyene chain interacting with a pair of Al atoms. The results are discussed in relation to photoelectron spectra taken during Al deposition on an oligomeric model for polyacetylene (a diphenylpolyene with 7 C=C bonds in the polyene segment).
|
|
| 17. |
- Friedlein, R, et al.
(författare)
-
Ultra-fast charge transfer in organic electronic materials and at hybrid interfaces studied using the core-hole clock technique
- 2011
-
Ingår i: JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA. - : Elsevier Science B.V., Amsterdam.. - 0368-2048. ; 183:1-3, s. 101-106
-
Tidskriftsartikel (refereegranskat)abstract
- The focus of this brief review is the use of resonant photoemission in its "core-hole clock" expression for the study of two important problems relevant for the field of organic electronics: the dynamical charge transfer across hybrid organic-inorganic interfaces, and the intermolecular charge transfer in the bulk of organic thin films. Following an outline of the technique, a discussion of its applicability and a short overview of experimental results obtained thus far, two examples are used to illustrate particular results relevant for the understanding of the charge transport in organic electronic devices. First, for Fe(II)-tetraphenylporphyrin molecules on semi-metallic molybdenum disulfide substrates, the electronic coupling to the substrate and the efficiency of charge transport across the interface different for the individual molecular electronic subsystems is discussed. And second, a discotic liquid crystalline material forming columnar assemblies is used to illustrate ultra-fast intermolecular charge transfer on the order of a few femtoseconds indicating an electronic coupling between the phthalocyanine units stronger than expected from the macroscopic charge transport characteristics of the material. (C) 2011 Published by Elsevier B.V.
|
|
| 18. |
- Gadisa, Abay, et al.
(författare)
-
Transparent polymer cathode for organic photovoltaic devices
- 2006
-
Ingår i: Synthetic metals. - : Elsevier BV. - 0379-6779 .- 1879-3290. ; 156:16-17, s. 1102-1107
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate a prototype solar cell with a transparent polymer cathode, and indium-tin-oxide (ITO)/poly (3, 4-ethylene dioxythiophene)-poly (styrene sulphonate) (PEDOT:PSS) anode. As an active layer, thin film of a bulk heterojunction of polyfluorene copolymer poly[2,7-(9,9-dioctyl-fluorene)-alt-5,5-(4′,7′-di-2thienyl-2′,1′3′-benzothiadiazole)] (APFO-3) and an electron acceptor molecule [6] and [6]-phenyl-C61-butyric acid methyl ester (PCBM) (1:4 wt.) was sandwiched between the two transparent polymer electrodes. The cathode is another form of PEDOT formed by vapor phase polymerised PEDOT (VPP PEDOT) of conductivity 102–103 S/cm. The cathode is supported on an elastomeric substrate, and forms a conformal contact to the APFO-3/PCBM blend. Transparent solar cells are useful for building multilayer and tandem solar cells.
|
|
| 19. |
|
|
| 20. |
- Guo, J.-H., et al.
(författare)
-
How the phenyle rings (benzene) act as building blocks in pi conjugated polymers
- 1998
-
Ingår i: Advanced Light Source. - Berkeley : Ernest Orlando Lawrence Berkeley National Laboratory, University of California Berkeley, California, USA. ; , s. 129-132
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Organic conjugated polymers have the electronic structure of semiconductors and can be doped to become good conductors (1). Conjugated polymers are now used as active materials in a wide variety of prototype applications such as light emitting diodes [2] and organic transistors [3,4]. Most of the interesting chemistry and physics of conjugated polymers is associated with the details of the electronic structure at the valence and conduction band edges and, in this connection, various electron spectroscopies can be used as tools for diagnosis of the relevant electronic and geometric properties....
|
|
| 21. |
- Guo, J.-H., et al.
(författare)
-
Resonant and nonresonant x-ray scattering spectra of some poly(phenylenevinylene)s
- 1998
-
Ingår i: Journal of Chemical Physics. - : AIP Publishing. - 0021-9606 .- 1089-7690. ; 108:14, s. 5990-5996
-
Tidskriftsartikel (refereegranskat)abstract
- The electronic structure of some poly(phenylenevinylene)s have been investigated by resonant and nonresonant x-ray inelastic scattering spectroscopies. The nonresonant as well as all resonant spectra for each polymer demonstrate benzene-like features, indicating a local character of the x-ray emission in which the phenyl ring acts as a building block. Theoretical simulations of x-ray energies and intensities taking the repeat unit as a model molecule of the polymer agree with the experimental spectra fairly well. The edges of the occupied bands have been identified in the nonresonant spectra of each polymer. By subtracting the emission energy of the highest occupied molecular orbital in the nonresonant spectrum from the core excitation energy in the resonant spectrum an alternative way to determine the optical band gap is obtained. As for free benzene the outer π band in the polymer spectra show a depletion of the emission going from the nonresonant to the resonant x-ray emission spectra. It is demonstrated that this transition, which is strictly symmetry forbidden for free benzene, becomes effectively forbidden in the polymer case as a result of strong interference effects, and it is argued that this is the general case for resonant x-ray emission of conjugated polymers as far as the frozen orbital approximation holds.
|
|
| 22. |
- Kim, J.S., et al.
(författare)
-
Kelvin probe and ultraviolet photoemission measurements of indium tin oxide work function: : a comparison
- 2000
-
Ingår i: Synthetic metals. - 0379-6779 .- 1879-3290. ; 111-112, s. 311-314
-
Tidskriftsartikel (refereegranskat)abstract
- We report a comparison of the work functions of thin films of indium tin oxide (ITO), carried out by means of ultraviolet photoelectron spectroscopy (UPS) and by measurements of the contact potential difference with respect to a gold reference electrode (Kelvin probe (KP) method). We investigated commercially available ITOs both "as-received", and after certain surface treatments, such as oxygen plasma. First, we find measurable discrepancies between KP values measured with three different instruments, and between the KP and the UPS values. Secondly, and unexpectedly, we find that the KP, although more sensitive than UPS, does not detect certain differences between ITOs with different surface treatments. We discuss the results in view of the different environments in which the measurements are carried out (UHV for the UPS and air/Ar for the Kelvin method), of the effects which may be induced by the high-energy photon irradiation in the UPS measurement, and of the stability of the gold probe work function in gas ambient. We conclude that UPS is better-suited for absolute work function determination, although KP remains a convenient and inexpensive tool for fast screening of contact potential differences. (C) 2000 Elsevier Science S.A. All rights reserved.
|
|
| 23. |
- Lazzaroni, R., et al.
(författare)
-
Chemical and electronic aspects of metal/conjugated polymer interfaces : Implications for electronic devices
- 1995
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 71:1-3, s. 2159-2162
-
Tidskriftsartikel (refereegranskat)abstract
- The chemical nature and the electronic structure of metal/conjugated polymer interfaces are investigated in the context of polymer-based light-emitting diodes. We consider the interaction of low-workfunction metals (Al, Ca) with the surface of conjugated polymers or model oligomer molecules with a combined experimental and theoretical approach. The early stages of the interface formation are followed with X-ray and ultraviolet photoelectron spectroscopies and the experimental data are compared to the results of quantum chemical calculations. The reactions of Al and Ca with the organic surface are found to be fundamentally different: while the former forms new covalent bonds onto the polymer backbone, the latter tends to dope the conjugated system. Both types of reaction are expected to modify drastically the electronic properties of the polymer semiconductor.
|
|
| 24. |
- Lazzaroni, R., et al.
(författare)
-
Electronic Structure of Metal/Polymer Interfaces : aluminum on Conjugated Polymers
- 1991
-
Ingår i: Metallized Plastics 2. - Boston, MA : Springer. - 9781489907370 - 9781489907356 ; , s. 199-212
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Aluminum has been deposited on two types of conjugated polymers, polyalkylthiophene and polyaniline. The polymers were in the undoped, neutral form which possesses semiconducting properties. The chemical structure of the metal/polymer interface has been investigated by X-ray and UV photoelectron spectroscopy. Core level spectra indicate that aluminum reacts with the sulfur atom of the polythiophene chain, strongly perturbing the π-electron system. In the case of polyaniline, the interaction with the metal depends on the oxidation state of the polymer. UPS data, combined with the results of band structure calculations, are interpreted in terms of the Al-induced modifications of the π-electron system.
|
|
| 25. |
|
|
