| 1. |
- Oberg, K., et al.
(författare)
-
Comparison of monolayer films of stearic acid and methyl stearate on an Al2O3 surface
- 2001
-
Ingår i: Thin Solid Films. - : Elsevier. - 0040-6090. ; 397:1-2, s. 102-8
-
Tidskriftsartikel (refereegranskat)abstract
- Both stearic acid and methyl stearate chemisorbs onto an oxide surface of aluminum with an asymmetric coordination of the carboxylate group as concluded from infrared (IR) spectroscopy data. Similarities in the IR spectra of the films from the two compounds suggest that the ester is bonded in the same way as the acid, and that the ester therefore undergoes hydrolysis during the surface reaction. X-Ray photoelectron spectroscopy (XPS) and IR data are interpreted in terms of self-assembled monolayer formation and a more dense film from the carboxylic acid in comparison with that from the ester. (C) 2001 Elsevier Science B.V. All rights reserved.
|
|
| 2. |
- Ajaikumar, Samikannu, et al.
(författare)
-
Oxidation of α-pinene over gold containing bimetallic nanoparticles supported on reducible TiO2 by DPU method
- 2011
-
Ingår i: Applied Catalysis A. - Amsterdam : Elsevier. - 0926-860X .- 1873-3875. ; 392:1-2, s. 11-18
-
Tidskriftsartikel (refereegranskat)abstract
- A series of bimetallic catalysts Au–M (where M = Cu, Co and Ru) were supported on a reducible TiO2 oxide via deposition-precipitation (DP) method with a slow decomposition of urea as the precipitating agent. The characteristic structural features of the prepared materials were characterized by various physico-chemical techniques such as X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). XPS results indicated the formation of alloyed bimetallic particles on the TiO2 support. TEM results confirmed the fine dispersion of metal nanoparticles on the support with an average particle size in the range of 3–5 nm. An industrially important process, oxy-functionalization of α-pinene was carried out over the prepared bimetallic heterogeneous catalysts under liquid phase conditions. Reaction parameters such as the reaction time, temperature, and the effect of solvent were studied for optimal conversion of α-pinene into verbenone. The major products obtained were verbenone, verbenol, α-pinene oxide and alkyl-pinene peroxide. The activity of the catalysts followed the order; AuCu/TiO2 > AuCo/TiO2 > Cu/TiO2 > Au/TiO2 > AuRu/TiO2. Upon comparison of the various catalysts, AuCu/TiO2 was found to be an active and selective catalyst towards the formation of verbenone. The temperature, nature of the catalysts and the choice of solvents greatly influenced the reaction rate.
|
|
| 3. |
- Annamalai, Alagappan, et al.
(författare)
-
Influence of Sb5+ as a Double Donor on Hematite (Fe3+) Photoanodes for Surface-Enhanced Photoelectrochemical Water Oxidation
- 2018
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 10:19, s. 16467-16473
-
Tidskriftsartikel (refereegranskat)abstract
- To exploit the full potential of hematite (α-Fe2O3) as an efficient photoanode for water oxidation, the redox processes occurring at the Fe2O3/electrolyte interface need to be studied in greater detail. Ex situ doping is an excellent technique to introduce dopants onto the photoanode surface and to modify the photoanode/electrolyte interface. In this context, we selected antimony (Sb5+) as the ex situ dopant because it is an effective electron donor and reduces recombination effects and concurrently utilize the possibility to tuning the surface charge and wettability. In the presence of Sb5+ states in Sb-doped Fe2O3 photoanodes, as confirmed by X-ray photoelectron spectroscopy, we observed a 10-fold increase in carrier concentration (1.1 × 1020 vs 1.3 × 1019 cm–3) and decreased photoanode/electrolyte charge transfer resistance (∼990 vs ∼3700 Ω). Furthermore, a broad range of surface characterization techniques such as Fourier-transform infrared spectroscopy, ζ-potential, and contact angle measurements reveal that changes in the surface hydroxyl groups following the ex situ doping also have an effect on the water splitting capability. Theoretical calculations suggest that Sb5+ can activate multiple Fe3+ ions simultaneously, in addition to increasing the surface charge and enhancing the electron/hole transport properties. To a greater extent, the Sb5+- surface-doped determines the interfacial properties of electrochemical charge transfer, leading to an efficient water oxidation mechanism.
|
|
| 4. |
- Artemenko, A., et al.
(författare)
-
Reference XPS spectra of amino acids
- 2021
-
Konferensbidrag (refereegranskat)abstract
- In this report we present XPS data for five amino acids (AAs) (tryptophan, methionine, glutamine, glutamic acid, and arginine) with different side chain groups measured in solid state (powder form). The theoretically and experimentally obtained chemical structure of AAs are compared. Here, we analyse and discuss C 1 s, N 1 s, O 1s and S 2p core level binding energies, FWHMs, atomic concentrations of the functional groups in AAs. The experimentally obtained and theoretically calculated ratio of atomic concentrations are compared. The zwitterionic nature of methionine and glutamine in solid state was determined from protonated amino groups in N 1s peak and deprotonated carboxylic groups in the C 1s spectrum. The obtained XPS results for AAs well correspond with previously reported data.
|
|
| 5. |
- Asres, Georgies Alene, et al.
(författare)
-
Ultrasensitive H2S gas sensors based on p-type WS2 hybrid materials
- 2018
-
Ingår i: Nano Reseach. - : Springer. - 1998-0124 .- 1998-0000. ; 11:8, s. 4215-4224
-
Tidskriftsartikel (refereegranskat)abstract
- Owing to their higher intrinsic electrical conductivity and chemical stability with respect to their oxide counterparts, nanostructured metal sulfides are expected to revive materials for resistive chemical sensor applications. Herein, we explore the gas sensing behavior of WS2 nanowire-nanoflake hybrid materials and demonstrate their excellent sensitivity (0.043 ppm-1) as well as high selectivity towards H2S relative to CO, NH3, H2, and NO (with corresponding sensitivities of 0.002, 0.0074, 0.0002, and 0.0046 ppm-1, respectively). Gas response measurements, complemented with the results of X-ray photoelectron spectroscopy analysis and first-principles calculations based on density functional theory, suggest that the intrinsic electronic properties of pristine WS2 alone are not sufficient to explain the observed high sensitivity towards H2S. A major role in this behavior is also played by O doping in the S sites of the WS2 lattice. The results of the present study open up new avenues for the use of transition metal disulfide nanomaterials as effective alternatives to metal oxides in future applications for industrial process control, security, and health and environmental safety.
|
|
| 6. |
- Aulin, Christian, 1980-, et al.
(författare)
-
Wetting kinetics of oil mixtures on fluorinated model cellulose surfaces
- 2008
-
Ingår i: Journal of Colloid and Interface Science. - : Elsevier BV. - 0021-9797 .- 1095-7103. ; 317:2, s. 556-567
-
Tidskriftsartikel (refereegranskat)abstract
- The wetting of two different model cellulose surfaces has been studied; a regenerated cellulose (RG) surface prepared by spin-coating, and a novel multilayer film of poly(ethyleneimine) and a carboxymethylated microfibrillated cellulose (MFC). The cellulose films were characterized in detail using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM indicates smooth and continuous films on a nanometer scale and the RMS roughness of the RG cellulose and MFC surfaces was determined to be 3 and 6 nm, respectively. The cellulose films were modified by coating with various amounts of an anionic fluorosurfactant, perfluorooctadecanoic acid, or covalently modified with pentadecafluorooctanyl chloride. The fluorinated cellulose films were used to follow the spreading mechanisms of three different oil mixtures. The viscosity and surface tension of the oils were found to be essential parameters governing the spreading kinetics on these surfaces. XPS and dispersive surface energy measurements were made on the cellulose films coated with perfluorooctadecanoic acid. A strong correlation was found between the surface concentration of fluorine, the dispersive surface energy and the contact angle of castor oil on the surface. A dispersive surface energy less than 18 mN/m was required in order for the cellulose surface to be non-wetting (Ξe > 90 °) by castor oil.
|
|
| 7. |
- Barišić, Antun, et al.
(författare)
-
Experimental Data Contributing to the Elusive Surface Charge of Inert Materials in Contact with Aqueous Media
- 2021
-
Ingår i: Colloids and interfaces. - : MDPI. - 2504-5377. ; 5:1
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- We studied the charging of inert surfaces (polytetrafluoroethylene, i.e., PTFE; graphite; graphene; and hydrophobic silica) using classical colloid chemistry approaches. Potentiometric titrations showed that these surfaces acquired less charge from proton-related reactions than oxide minerals. The data from batch-type titrations for PTFE powder did not show an effect of ionic strength, which was also in contrast with results for classical colloids. In agreement with classical colloids, the electrokinetic results for inert surfaces showed the typical salt level dependence. In some cases, the point of zero net proton charge as determined from mass and tentatively from acid–base titration differed from isoelectric points, which has also been previously observed, for example by Chibowski and co-workers for ice electrolyte interfaces. Finally, we found no evidence for surface contaminations of our PTFE particles before and after immersion in aqueous solutions. Only in the presence of NaCl-containing solutions did cryo-XPS detect oxygen from water. We believe that our low isoelectric points for PTFE were not due to impurities. Moreover, the measured buffering at pH 3 could not be explained by sub-micromolar concentrations of contaminants. The most comprehensive explanation for the various sets of data is that hydroxide ion accumulation occurred at the interfaces between inert surfaces and aqueous solutions.
|
|
| 8. |
- Behravesh, Erfan, et al.
(författare)
-
Synthesis and characterization of Au nano particles supported catalysts for partial oxidation of ethanol : Influence of solution pH, Au nanoparticle size, support structure and acidity
- 2017
-
Ingår i: Journal of Catalysis. - : Elsevier. - 0021-9517 .- 1090-2694. ; 353, s. 223-238
-
Tidskriftsartikel (refereegranskat)abstract
- Partial oxidation of ethanol to acetaldehyde was carried out over gold catalysts supported on various oxides and zeolites by deposition precipitation. The special focus of this work was on the influence of H-Y zeolite surface charge on Au cluster size and loading linking it to activity and selectivity in ethanol oxidation and comparing with other studied catalysts. The catalysts were characterized by nitrogen physisorption, transmission electron microscopy (TEM), scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDXA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and zeta potential measurements. pH of the solution governed the Au NPs size within the range of 5.8–13.2 nm with less negatively charged surfaces leading to formation of smaller clusters. Au loading on H-Y zeolite with silica to alumina ratio of 80 was increased by raising the pH. In fact, H-Y-12 and H-Beta-25 were selective towards diethyl ether while acetaldehyde was the prevalent product on less acidic H-Y-80. The results demonstrated strong dependency of the catalytic activity on the Au cluster size. Namely turn over frequency (TOF) decreased with an increase in metal size from 6.3 to 9.3 nm on H-Y-80. Selectivity towards acetaldehyde and ethyl acetate did not change significantly on H-Y-80 within 6.3–9.3 nm Au particle size range. On Al2O3 support, however, selectivity towards acetaldehyde increased considerably upon diminishing Au average particle size from 3.7 to 2.1 nm.
|
|
| 9. |
|
|
| 10. |
- Bengtsson, Åsa, et al.
(författare)
-
A solubility and surface complexation study of a non-stoichiometric hydroxyapatite
- 2009
-
Ingår i: Geochimica et Cosmochimica Acta. - : Elsevier. - 0016-7037 .- 1872-9533. ; 73:2, s. 257-267
-
Tidskriftsartikel (refereegranskat)abstract
- The dissolution and surface complexation of a non-stoichiometric hydroxyapatite (Ca8.4(HPO4)1.6(PO4)4.4(OH)0.4), (HAP) was studied in the pH range 3.5 – 10.5, at 25 ºC in 0.1 M Na(Cl). The results from well-equilibrated batch experiments, potentiometric titrations, and zeta-potential measurements were combined with information provided by Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy and X-ray Photoelectron Spectroscopy (XPS). The information from the analyses was used to design an equilibration model that takes in to account dissolution, surface potential, solution and surface complexation, as well as possible phase transformations. The results from the XPS measurements clearly show that the surface of the mineral has a different composition than the bulk and that the Ca/P ratio of the surface layer is 1.4 ± 0.1. This ratio was also found in solution in the batches equilibrated at low pH where the dominating reaction is dissolution. In the batches equilibrated at near neutral pH values, however, the Ca/P ratio in solution attains values as high as 25, which is due to re-adsorption of phosphate ions to the HAP surface. The total concentration of protons as well as the total concentration of dissolved calcium and phosphate in solution were used to calculate a model for the dissolution and surface complexation of HAP. The constant capacitance model was applied in designing the following surface complexation model.
|
|
| 11. |
- Bengtsson, Åsa, et al.
(författare)
-
Phase Transformations, Ion-Exchange, Adsorption, and Dissolution Processes in Aquatic Fluorapatite Systems
- 2009
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 25:4, s. 2355-2362
-
Tidskriftsartikel (refereegranskat)abstract
- A synthetic fluorapatite was prepared that undergoes a phase transformation generated during a dialysis step. A surface layer with the composition Ca9(HPO4)2(PO4)4F2 is formed, which is suggested to form as one calcium atom is replaced by two protons. A surface complexation model, based upon XPS measurements, potentiometric titration data, batch experiments, and zeta-potential measurements was presented. The CaOH and OPO3H2 sites were assumed to have similar protolytic properties as in a corresponding nonstoichiometric HAP (Ca8.4(HPO4)1.6(PO4)4.4(OH)0.4) system. Besides a determination of the solubility product of Ca9(HPO4)2(PO4)4F2, two additional surface complexation reactions were introduced; one that accounts for a F/OH ion exchange reaction, resulting in the release of quite high fluoride concentrations (∼1 mM) that turned out to be dependent on the surface area of the particles. Furthermore, to explain the lowering of pHiep from around 8 in nonstoichiometric HAP suspensions to about 5.7 in FAP suspensions, a reaction that lowers the surface charge due to the readsorption of fluoride ions to the positively charged Ca sites was introduced: ≡CaOH2+ + F− ⇋ ≡CaF + H2O. The resulting model also agrees with predictions based upon XPS and ATR-FTIR observations claiming the formation of CaF2(s) in the most acidic pH range.
|
|
| 12. |
- Biasi, P., et al.
(författare)
-
Revealing the role of bromide in the H2O2 direct synthesis with the catalyst wet pretreatment method (CWPM)
- 2017
-
Ingår i: AIChE Journal. - : American Institute of Chemical Engineers. - 0001-1541 .- 1547-5905. ; 63:1, s. 32-42
-
Tidskriftsartikel (refereegranskat)abstract
- A tailor-made Pd0/K2621 catalyst was subjected to post synthesis modification via a wet treatment procedure. The aimwas the understanding of the role of promoters and how—if any—improvements could be qualitatively related to the cat-alyst performance for the H2O2direct synthesis. The Catalyst Wet Pretreatment Method was applied in different metha-nolic solutions containing H2O2, NaBr, and H3PO4, either as single modifiers or as a mixture. The catalyst wascharacterized by Transmission Electron Microscopy and X-ray Photoelectron Spectroscopy. It was concluded that themodified catalysts give rise to higher selectivities compared to the pristi ne reference catalyst thus opening a possibilityto exclude the addit ion of the undesirable selectivity enhancers in the reaction medium. This work provides original evi-dence on the role of promoter s, especially bromide, allowing the formulation of a new reaction mechanism for one ofthe most challenging reactions recognized by the world.
|
|
| 13. |
- Boily, Jean-Francois, et al.
(författare)
-
X-ray photoelectron spectroscopy of fast-frozen hematite colloids in aqueous solutions. 2. tracing the relationship between surface charge and electrolyte adsorption
- 2010
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 114:6, s. 2613-2616
-
Tidskriftsartikel (refereegranskat)abstract
- Colloidal-sized hematite spheroids exposed to aqueous NaCl solutions were investigated by X-ray photoelectron spectroscopy using the fast-frozen technique. The O 1s region provided evidence for (de)protonation reactions of surface (hydr)oxo groups of OH-enriched/O-depleted hematite Surfaces. These results were also correlated to changes in sodium (Na 1s) and chloride (Cl 2p) contents with pH. Electrolyte ion surface loadings were successfully predicted using a classic thermodynamic adsorption model normalized for surface site density. These efforts pointed to ion-specific inner-Helmholtz plane capacitances.
|
|
| 14. |
- Borah, Raju Kumar, et al.
(författare)
-
Copper Oxide Nanoparticles as a Mild and Efficient Catalyst for N-Arylation of Imidazole and Aniline with Boronic Acids at Room Temperature
- 2017
-
Ingår i: Synlett. - : Georg Thieme Verlag KG. - 0936-5214 .- 1437-2096. ; 28:10, s. 1177-1182
-
Tidskriftsartikel (refereegranskat)abstract
- The present work describes the excellent catalytic activity of copper(II) oxide nanoparticles (NPs) towards N-arylation of aniline and imidazole at room temperature. The copper(II) oxide NPs were synthesized by a thermal refluxing technique and characterized by FT-IR spectroscopy; powder XRD, SEM, EDX, TEM, TGA, XPS, BET surface area analysis, and particle size analysis. The size of the NPs was found to be around 12 nm having a surface area of 164.180 m(2) g(-1). The catalytic system was also found to be recyclable and could be reused in subsequent catalytic runs without a significant loss of activity.
|
|
| 15. |
- Bottone, Anna, et al.
(författare)
-
Sodium hypochlorite as an oxidizing agent for removal of soil organic matter before microplastics analyses
- 2022
-
Ingår i: Journal of Environmental Quality. - : John Wiley & Sons. - 0047-2425 .- 1537-2537. ; 51:1, s. 112-122
-
Tidskriftsartikel (refereegranskat)abstract
- The omnipresence of microplastics (MPs) across Earth's surface has raised concerns about their environmental impact and created an urgent need for methods to identify them in complex soil and sedimentary matrices. However, detecting MPs in the O horizons of soils is difficult because plastic polymers share many physical and chemical properties with natural soil organic matter (SOM). In this study, we assessed whether sodium hypochlorite (NaOCl), a reagent that can oxidize SOM and simultaneously preserve mineral constituents, can be used for MP analysis and characterization in soil environments. In addition, we scrutinized how factors such as MP size, polymer type, extraction methods, and soil matrix affect the recovery of microplastic particles. We used both hydrophobic and density-dependent separation methods to assess the effects of our oxidation treatment on the recovery of MP. We observed that NaOCl effectively removed SOM without greatly altering the surface properties of resistant MP polymers (polypropylene, polylactic acid, low-density polyethylene, and polyethylene terephthalate), which were characterized using scanning electron microscopy and Fourier-transform infrared spectroscopy after SOM removal. The NaOCl treatment caused some chlorination and formation of additional C–OH bonds on polymer surfaces, which likely contributed to the reduced efficiency of the hydrophobic-based (oil) extraction. We conclude that NaOCl treatment can improve detection of MPs in SOM-rich soil and that recovery of MPs from soils is influenced by MP size, polymer type, extraction method, and soil type, which makes it challenging to develop a universal analytical method.
|
|
| 16. |
- Bukhanko, Natalia, et al.
(författare)
-
Continuous gas phase synthesis of 1-ethyl chloride from ethyl alcohol and hydrochloric acid over Al2O3-based catalysts: the ‘green’ route
- 2013
-
Ingår i: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 1:8, s. 883-893
-
Tidskriftsartikel (refereegranskat)abstract
- The synthesis of 1-ethyl chloride in the gas-phase mixture of ethanol and hydrochloric acid over ZnCl2/Al2O3 catalysts was studied in a continuous reactor using both commercial and tailor-made supports. The catalytic materials were characterized by the means of structural (XPS, TEM, XRD, and BET) and catalytic activity (selectivity and conversion) measurements. The reaction parameters such as temperature, pressure, and feedstock flow rates were optimized for the conversion of ethanol to ethyl chloride. The new tailor-made highly porous Al2O3-based catalyst outperformed its commercial counterpart by exhibiting high conversion and selectivity (98%) at the temperature of 325 °C. Long-term stability tests (240 h) confirmed the excellent durability of the tailor-made alumina catalysts. The process demonstrated here poses an efficient and economic “green” large-scale on-site synthesis of this industrially important reactant in industry, where bioethanol is produced and 1-ethyl chloride is necessary, e.g., for ethylation of cellulose and synthetic polymer products. On-site in situ production of ethyl chloride avoids the problems associated with the transportation and storage of toxic and flammable 1-ethyl chloride.
|
|
| 17. |
- Bukhanko, Natalia, et al.
(författare)
-
Gas phase synthesis of isopropyl chloride from isopropanol and HCl over alumina and flexible 3-D carbon foam supported catalysts
- 2017
-
Ingår i: Applied Catalysis A. - : Elsevier. - 0926-860X .- 1873-3875. ; 542:25, s. 212-225
-
Tidskriftsartikel (refereegranskat)abstract
- Isopropyl chloride synthesis from isopropanol and HCl in gas phase over ZnCl2 catalysts supported on Al2O3 as well as flexible carbon foam was studied in a continuous reactor. A series of catalytic materials were synthesised and characterised by BET, XPS, SEM, TEM, XRD and NH3-TPD methods. Catalytic activity tests (product selectivity and conversion of reactants) were performed for all materials and optimal reaction conditions (temperature and feedstock flow rates) were found. The results indicate that the highest yield of isopropyl chloride was obtained over 5 wt.% ZnCl2 on commercial Al2O3 (No. II) (95.3%). Determination of product mixture compositions and by-product identification were done using a GC-MS method. Carbon foam variant catalyst, 5 wt.% ZnCl2/C, was found to perform best out of the carbon-supported materials, achieving ∼75% yield of isopropyl chloride. The kinetic model describing the process in a continuous packed bed reactor was proposed and kinetic parameters were calculated. The activation energy for the formation of isopropyl chloride reaction directly from isopropanol and HCl was found to be ∼58 kJ/mol.
|
|
| 18. |
- Cano, A., et al.
(författare)
-
Contribution to the coordination chemistry of transition metal nitroprussides : a cryo-XPS study
- 2019
-
Ingår i: New Journal of Chemistry. - : Royal Society of Chemistry. - 1144-0546 .- 1369-9261. ; 43:12, s. 4835-4848
-
Tidskriftsartikel (refereegranskat)abstract
- The series of coordination polymers under investigation was formed by the assembly of a pentacyanonitrosylferrate(ii) anionic block, [Fe(CN)(5)NO](2-), through monovalent and divalent transition metal ions, e.g. Mn2+, Fe2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+, Hg2+ and Ag+. For divalent ions, the resulting materials have a 3D porous framework with attractive features for applications in gas storage and separation, as electroactive solids, light-driven molecular magnets, and so on; in this study, we report the results obtained for a series of coordination polymers using the cryogenic X-ray photoelectron spectroscopy (cryo-XPS) data; comprehensive details regarding their coordination chemistries were obtained from the acquired spectra in addition to their comparison with the structural and spectroscopic information obtained from other techniques. The results discussed herein are original and contribute towards the understanding of the electronic structures and related properties for this family of coordination polymers. This series of solids was found to be highly susceptible to strong damage induced by X-ray beams throughout the conventional XPS experiment; therefore, the analysis was conducted under cryogenic conditions.
|
|
| 19. |
- Cano, A., et al.
(författare)
-
Intercalation of pyrazine in layered copper nitroprusside : synthesis, crystal structure and XPS study
- 2019
-
Ingår i: Journal of Solid State Chemistry. - : Elsevier. - 0022-4596 .- 1095-726X. ; 273, s. 1-10
-
Tidskriftsartikel (refereegranskat)abstract
- Hybrid inorganic–organic solids form an interesting family of functional materials, where their functionalities are determined by both, the inorganic and organic building blocks. This study reports the intercalation of pyrazine in 2D copper nitroprusside, the crystal structure of the resulting hybrid solid and explores the scope of cryogenic X-ray photoelectron spectroscopy (XPS) to shed light on its electronic structure. In this material, the pyrazine molecule appears coordinated to Cu atoms from neighboring layers, to form the columns in the resulting 3D porous framework. Its crystal structure was solved and refined from the corresponding XRD powder pattern. XPS data, recorded under cryogenic conditions, provided fine details on the electronic structure of this hybrid solid. The binding energy values for the ligand atoms and the involved metals show a definite correlation with the structural data and FT-IR spectra. When XPS spectra were recorded at room temperature, a significant sample decomposition was observed. Three possible mechanisms for the sample damage during the XPS experiment are considered. The hybrid material under study is representative of a wide series of nanoporous solids obtained by intercalation of organic pillars between 2D inorganic solids.
|
|
| 20. |
- Cant, David J. H., et al.
(författare)
-
Cryo-XPS for surface characterization of nanomedicines
- 2023
-
Ingår i: Journal of Physical Chemistry A. - : American Chemical Society (ACS). - 1089-5639 .- 1520-5215. ; 127:39, s. 8220-8227
-
Tidskriftsartikel (refereegranskat)abstract
- Nanoparticles used for medical applications commonly possess coatings or surface functionalities intended to provide specific behavior in vivo, for example, the use of PEG to provide stealth properties. Direct, quantitative measurement of the surface chemistry and composition of such systems in a hydrated environment has thus far not been demonstrated, yet such measurements are of great importance for the development of nanomedicine systems. Here we demonstrate the first use of cryo-XPS for the measurement of two PEG-functionalized nanomedicines: a polymeric drug delivery system and a lipid nanoparticle mRNA carrier. The observed differences between cryo-XPS and standard XPS measurements indicate the potential of cryo-XPS for providing quantitative measurements of such nanoparticle systems in hydrated conditions.
|
|
| 21. |
- Cheng, Wei, et al.
(författare)
-
Nanoscale hydration in layered manganese oxides
- 2021
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 37:2, s. 666-674
-
Tidskriftsartikel (refereegranskat)abstract
- Birnessite is a layered MnO2 mineral capable of intercalating nanometric water films in its bulk. With its variable distributions of Mn oxidation states (MnIV, MnIII, and MnII), cationic vacancies, and interlayer cationic populations, birnessite plays key roles in catalysis, energy storage solutions, and environmental (geo)chemistry. We here report the molecular controls driving the nanoscale intercalation of water in potassium-exchanged birnessite nanoparticles. From microgravimetry, vibrational spectroscopy, and X-ray diffraction, we find that birnessite intercalates no more than one monolayer of water per interlayer when exposed to water vapor at 25 °C, even near the dew point. Molecular dynamics showed that a single monolayer is an energetically favorable hydration state that consists of 1.33 water molecules per unit cell. This monolayer is stabilized by concerted potassium–water and direct water–birnessite interactions, and involves negligible water–water interactions. Using our composite adsorption–condensation–intercalation model, we predicted humidity-dependent water loadings in terms of water intercalated in the internal and adsorbed at external basal faces, the proportions of which vary with particle size. The model also accounts for additional populations condensed on and between particles. By describing the nanoscale hydration of birnessite, our work secures a path for understanding the water-driven catalytic chemistry that this important layered manganese oxide mineral can host in natural and technological settings.
|
|
| 22. |
- Chernyschova, Irina V., et al.
(författare)
-
Mechanism of adsorption of long-chain alkylamines on silicates : a spectroscopic study. 2. Albite
- 2001
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 17:3, s. 775-785
-
Tidskriftsartikel (refereegranskat)abstract
- Using FTIR (DRIFTS and IRRAS) and XPS spectroscopy, ζ potential measurements, and Hallimond flotation tests, we confirmed that long-chain primary amines are adsorbed on silicates at pH 6-7 through the 2D-3D precipitation mechanism. The orientation and packing of dodecyl- and hexadecylammonium acetate and chloride adsorbed on albite in the different regions of the adsorption isotherm were determined. It was shown that these characteristics depend strongly on the substrate. Coadsorption of the counterion was not revealed, but the counterion was found to affect indirectly the adsorption at concentrations above the concentration of the bulk amine precipitation
|
|
| 23. |
- Chernysova, Irina V., et al.
(författare)
-
Mechanism of adsorption of long-chain alkylamines on silicates. A spectroscopic study. 1. Quartz
- 2000
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 16:21, s. 8071-8084
-
Tidskriftsartikel (refereegranskat)abstract
- The mechanism of adsorption of long-chain alkylamines at pH 6-7 onto quartz was studied using FTIR and XPS spectroscopy. The spectroscopic data were correlated with ζ potential and Hallimond flotation results. For the first time it was shown that (1) amine cation in the first monolayer is H-bonded with surface silanol group and this H-bond becomes stronger after the break in the adsorption characteristics (isotherm, ζ potential, floatability); (2) at the break the origin of the adsorbed amine species changes qualitatively, and along with alkylammonium ion attached to deprotonated silanol group, molecular amine appears at the surface and, as a result, monolayer thick patches of well-oriented and densely packed adsorbed amine species form rendering the surface highly hydrophobic; and (3) at higher amine concentration, bulk precipitation of molecular amine takes place. The counterion was found to influence both these steps. A model of successive two-dimensional and three-dimensional precipitation was suggested to explain amine adsorption on a silicate surface.
|
|
| 24. |
- Courtois, Julien, et al.
(författare)
-
A study of surface modification and anchoring techniques used in the preparation of monolithic microcolumns in fused silica capillaries.
- 2006
-
Ingår i: Journal of Separation Science. - : Wiley. - 1615-9306 .- 1615-9314. ; 29:1, s. 14-24
-
Tidskriftsartikel (refereegranskat)abstract
- Based on a survey of the literature on pretreatment of fused silica capillaries, 3 etching procedures and 11 silanization protocols based on the vinylic silane 3-((trimethoxysilyl)propyl) methacrylate (gamma-MAPS) were found to be most representative as a means of ensuring attachment of in situ prepared vinylic polymers. These techniques were applied to fused silica capillaries and the success in establishing the intended surface modification was assessed. X-ray photoelectron spectroscopy (XPS) was used to characterize the chemical state of the surface, providing information regarding presence of the reagent bound to the capillary. Wetting angles were measured and correlated with the XPS results. An adherence test was done by photopolymerization of a 2 mm long plug of 1,6-butanediol dimethacrylate in the prepared capillaries and evaluation of its ability to withstand applied hydraulic pressure. SEM was also performed in cases where the plug was released or other irregularities were observed. Finally, the roughness of the etched surface, considered to be of importance, was assessed by atomic force microscopy. Alkaline etching at elevated temperature provided a surface roughness promoting adhesion. The commonly used silanization protocols involving water in the silanization or washing steps gave inadequate surface treatment. The best silanization procedure was based on toluene as a solvent.
|
|
| 25. |
- Danishevskiĭ, A M, et al.
(författare)
-
Clusters of sulfur and selenium in nanoporous carbon
- 2007
-
Ingår i: Physics of the Solid State. - : MAIK Nauka/Interperiodica distributed exclusively by Springer Science+Business Media LLC.. ; 49:3, s. 571-9
-
Tidskriftsartikel (refereegranskat)abstract
- The results of x-ray diffraction, x-ray photoelectron spectroscopy, electrical, and galvanomagnetic studies of nanoporous carbon with sulfur and selenium nanoclusters introduced into pores are analyzed. Conclusions are drawn concerning the short-range order in the introduced clusters and their interaction with carbon.
|
|
