| 1. |
- Bergqvist, Jonas, et al.
(författare)
-
Sub-glass transition annealing enhances polymer solar cell performance
- 2014
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488. ; 2:17, s. 6146-6152
-
Tidskriftsartikel (refereegranskat)abstract
- Thermal annealing of non-crystalline polymer: fullerene blends typically results in a drastic decrease in solar cell performance. In particular aggressive annealing above the glass transition temperature results in a detrimental coarsening of the blend nanostructure. We demonstrate that mild annealing below the glass transition temperature is a viable avenue to control the nanostructure of a non-crystalline thiophene-quinoxaline copolymer: fullerene blend. Direct imaging methods indicate that coarsening of the blend nanostructure can be avoided. However, a combination of absorption and luminescence spectroscopy reveals that local changes in the polymer conformation as well as limited fullerene aggregation are permitted to occur. As a result, we are able to optimise the solar cell performance evenly across different positions of the coated area, which is a necessary criterion for large-scale, high throughput production.
|
|
| 2. |
- Kim, Minjin, et al.
(författare)
-
Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells
- 2022
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 375:6578, s. 302-306
-
Tidskriftsartikel (refereegranskat)abstract
- Improvements to perovskite solar cells (PSCs) have focused on increasing their power conversion efficiency (PCE) and operational stability and maintaining high performance upon scale-up to module sizes. We report that replacing the commonly used mesoporous-titanium dioxide electron transport layer (ETL) with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots (paa-QD-SnO2) on the compact-titanium dioxide enhanced light capture and largely suppressed nonradiative recombination at the ETL-perovskite interface. The use of paa-QD-SnO2 as electron-selective contact enabled PSCs (0.08 square centimeters) with a PCE of 25.7% (certified 25.4%) and high operational stability and facilitated the scale-up of the PSCs to larger areas. PCEs of 23.3, 21.7, and 20.6% were achieved for PSCs with active areas of 1, 20, and 64 square centimeters, respectively.
|
|
| 3. |
- Qian, Deping, et al.
(författare)
-
Design rules for minimizing voltage losses in high-efficiency organic solar cells
- 2018
-
Ingår i: Nature Materials. - : NATURE PUBLISHING GROUP. - 1476-1122 .- 1476-4660. ; 17:8, s. 703-
-
Tidskriftsartikel (refereegranskat)abstract
- The open-circuit voltage of organic solar cells is usually lower than the values achieved in inorganic or perovskite photovoltaic devices with comparable bandgaps. Energy losses during charge separation at the donor-acceptor interface and non-radiative recombination are among the main causes of such voltage losses. Here we combine spectroscopic and quantum-chemistry approaches to identify key rules for minimizing voltage losses: (1) a low energy offset between donor and acceptor molecular states and (2) high photoluminescence yield of the low-gap material in the blend. Following these rules, we present a range of existing and new donor-acceptor systems that combine efficient photocurrent generation with electroluminescence yield up to 0.03%, leading to non-radiative voltage losses as small as 0.21 V. This study provides a rationale to explain and further improve the performance of recently demonstrated high-open-circuit-voltage organic solar cells.
|
|
| 4. |
- Tang, Zheng, et al.
(författare)
-
Universal modification of poor cathodes into good ones by a polymer interlayer for high performance reversed organic solar cells
- 2014
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- In organic bulk-heterojunction solar cells, energy losses at the active layer/electrode interface are often observed. Modification of these interfaces with organic interlayers optimizes charge carrier injection and extraction and thus improves device performance. In this work, the effects of cathode modification by a conjugated polymer interlayer PFPA1 on the performance of reversed organic solar cells (substrate/cathode/active layer/transparent anode) based on different active material systems and different substrate electrodes are systematically investigated. A reduction of the work function irrespective of the substrate cathode used is observed upon the deposition of the PFPA1 interlayer; further related to an improved built-in electric field and open-circuit voltage. The amphiphilic character of the PFPA1 interlayer alters the surface energy of the substrate cathode, leading to the formation of a better active layer morphology aiding efficient exciton dissociation and photocurrent extraction in the modified solar cells. Hence, internal quantum efficiency is found significantly higher than that of their unmodified counterparts, while optically, the modified and unmodified solar cells are identical. Moreover, the deep HOMO of the PFPA1 interlayer improves the selectivity for all investigated substrate cathodes, thus enhancing the fill factor. We demonstrate a possibility of improving photovoltaic performance of reversed solar cells via a simple and universal interface modification and provide the basic guidelines for development and characterization of interface materials for organic solar cells in general.
|
|
