| 1. |
- Aad, G., et al.
(författare)
-
Determination of the strong coupling constant from transverse energy-energy correlations in multijet events at √ s=13 TeV with the ATLAS detector
- 2023
-
Ingår i: Journal of High Energy Physics (JHEP). - : Springer Nature. - 1126-6708 .- 1029-8479. ; 2023:7
-
Tidskriftsartikel (refereegranskat)abstract
- Measurements of transverse energy-energy correlations and their associated azimuthal asymmetries in multijet events are presented. The analysis is performed using a data sample corresponding to 139 fb-1 of proton-proton collisions at a centre-of-mass energy of root s = 13TeV, collected with the ATLAS detector at the Large Hadron Collider. The measurements are presented in bins of the scalar sum of the transverse momenta of the two leading jets and unfolded to particle level. They are then compared to next-to-next-to-leading-order perturbative QCD calculations for the first time, which feature a significant reduction in the theoretical uncertainties estimated using variations of the renormalisation and factorisation scales. The agreement between data and theory is good, thus providing a precision test of QCD at large momentum transfers Q. The strong coupling constant alpha(s) is extracted as a function of Q, showing a good agreement with the renormalisation group equation and with previous analyses. A simultaneous fit to all transverse energy-energy correlation distributions across different kinematic regions yields a value of alpha(s)( mZ) = 0.1175 +/- 0.0006 (exp.)(+0.0034) (-0.0017) (theo.), while the global fit to the asymmetry distributions yields alpha(s)(m(Z)) = 0.1185 +/- 0.0009 (exp.)(+0.0025)(-0.0012)(theo.).
|
|
| 2. |
- Aad, G., et al.
(författare)
-
Emulating the impact of additional proton–proton interactions in the ATLAS simulation by presampling sets of inelastic Monte Carlo events
- 2022
-
Ingår i: Computing and Software for Big Science. - : Springer Science and Business Media LLC. - 2510-2044 .- 2510-2036. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- The accurate simulation of additional interactions at the ATLAS experiment for the analysis of proton–proton collisions delivered by the Large Hadron Collider presents a significant challenge to the computing resources. During the LHC Run 2 (2015–2018), there were up to 70 inelastic interactions per bunch crossing, which need to be accounted for in Monte Carlo (MC) production. In this document, a new method to account for these additional interactions in the simulation chain is described. Instead of sampling the inelastic interactions and adding their energy deposits to a hard-scatter interaction one-by-one, the inelastic interactions are presampled, independent of the hard scatter, and stored as combined events. Consequently, for each hard-scatter interaction, only one such presampled event needs to be added as part of the simulation chain. For the Run 2 simulation chain, with an average of 35 interactions per bunch crossing, this new method provides a substantial reduction in MC production CPU needs of around 20%, while reproducing the properties of the reconstructed quantities relevant for physics analyses with good accuracy.
|
|
| 3. |
- Aad, G., et al.
(författare)
-
Inclusive-photon production and its dependence on photon isolation in pp collisions at √s=13 TeV using 139 fb-1 of ATLAS data
- 2023
-
Ingår i: Journal of High Energy Physics (JHEP). - : Springer Nature. - 1126-6708 .- 1029-8479. ; 2023:7
-
Tidskriftsartikel (refereegranskat)abstract
- Measurements of differential cross sections are presented for inclusive isolated photon production in pp collisions at a centre-of-mass energy of 13TeV provided by the LHC and using 139 fb-1 of data recorded by the ATLAS experiment. The cross sections are measured as functions of the photon transverse energy in different regions of photon pseudorapidity. The photons are required to be isolated by means of a fixed-cone method with two different cone radii. The dependence of the inclusive-photon production on the photon isolation is investigated by measuring the fiducial cross sections as functions of the isolation-cone radius and the ratios of the differential cross sections with different radii in different regions of photon pseudorapidity. The results presented in this paper constitute an improvement with respect to those published by ATLAS earlier: the measurements are provided for different isolation radii and with a more granular segmentation in photon pseudorapidity that can be exploited in improving the determination of the proton parton distribution functions. These improvements provide a more in-depth test of the theoretical predictions. Next-to-leading-order QCD predictions from JETPHOX and SHERPA and next-to-next-to-leading-order QCD predictions from NNLOJET are compared to the measurements, using several parameterisations of the proton parton distribution functions. The measured cross sections are well described by the fixed-order QCD predictions within the experimental and theoretical uncertainties in most of the investigated phase-space region.
|
|
| 4. |
- Aad, G., et al.
(författare)
-
Model-independent search for the presence of new physics in events including H → γγ with √s=13 TeV pp data recorded by the ATLAS detector at the LHC
- 2023
-
Ingår i: Journal of High Energy Physics (JHEP). - : Springer Nature. - 1126-6708 .- 1029-8479. ; 2023:7
-
Tidskriftsartikel (refereegranskat)abstract
- A model-independent search for new physics leading to final states containing a Higgs boson, with a mass of 125.09 GeV, decaying to a pair of photons is performed with 139 fb-1 of p root s = 13TeV pp collision data recorded by the ATLAS detector at the Large Hadron Collider at CERN. This search examines 22 final states categorized by the objects that are produced in association with the Higgs boson. These objects include isolated electrons or muons, hadronically decaying iota -leptons, additional photons, missing transverse momentum, and hadronic jets, as well as jets that are tagged as containing a b-hadron. No significant excesses above Standard Model expectations are observed and limits on the production cross section at 95% confidence level are set. Detector efficiencies are reported for all 22 signal regions, which can be used to convert detector-level cross-section limits reported in this paper to particle-level cross-section constraints.
|
|
| 5. |
- Aad, G., et al.
(författare)
-
Observation of electroweak production of two jets and a Z-boson pair
- 2023
-
Ingår i: Nature Physics. - : Springer Science and Business Media LLC. - 1745-2473 .- 1745-2481. ; 19:2, s. 237-253
-
Tidskriftsartikel (refereegranskat)abstract
- Electroweak symmetry breaking explains the origin of the masses of elementary particles through their interactions with the Higgs field. Besides the measurements of the Higgs boson properties, the study of the scattering of massive vector bosons with spin 1 allows the nature of electroweak symmetry breaking to be probed. Among all processes related to vector-boson scattering, the electroweak production of two jets and a Z-boson pair is a rare and important one. Here we report the observation of this process from proton–proton collision data corresponding to an integrated luminosity of 139 fb−1 recorded at a centre-of-mass energy of 13 TeV with the ATLAS detector at the Large Hadron Collider. We consider two different final states originating from the decays of the Z-boson pair: one containing four charged leptons and another containing two charged leptons and two neutrinos. The hypothesis of no electroweak production is rejected with a statistical significance of 5.7σ, and the measured cross-section for electroweak production is consistent with the Standard Model prediction. In addition, we report cross-sections for inclusive production of a Z-boson pair and two jets for the two final states.
|
|
| 6. |
- Aad, G., et al.
(författare)
-
Two-particle Bose–Einstein correlations in pp collisions at s√=13s=13 TeV measured with the ATLAS detector at the LHC
- 2022
-
Ingår i: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 82:7
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents studies of Bose–Einstein correlations (BEC) in proton–proton collisions at a centre-of-mass energy of 13 TeV, using data from the ATLAS detector at the CERN Large Hadron Collider. Data were collected in a special low-luminosity configuration with a minimum-bias trigger and a high-multiplicity track trigger, accumulating integrated luminosities of 151 μμb−1 and 8.4 nb−1, respectively. The BEC are measured for pairs of like-sign charged particles, each with |η|<2.5|η|<2.5, for two kinematic ranges: the first with particle pT>100 MeV and the second with particle pT>500 MeV. The BEC parameters, characterizing the source radius and particle correlation strength, are investigated as functions of charged-particle multiplicity (up to 300) and average transverse momentum of the pair (up to 1.5 GeV). The double-differential dependence on charged-particle multiplicity and average transverse momentum of the pair is also studied. The BEC radius is found to be independent of the charged-particle multiplicity for high charged-particle multiplicity (above 100), confirming a previous observation at lower energy. This saturation occurs independent of the transverse momentum of the pair.
|
|
| 7. |
- Andrean, Stefio Y., 1991-, et al.
(författare)
-
The ATLAS Fast TracKer system
- 2021
-
Ingår i: Journal of Instrumentation. - : Institute of Physics Publishing (IOPP). - 1748-0221. ; 16:7
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS Fast TracKer (FTK) was designed to provide full tracking for the ATLAS high-level trigger by using pattern recognition based on Associative Memory (AM) chips and fitting in high-speed field programmable gate arrays. The tracks found by the FTK are based on inputs from all modules of the pixel and silicon microstrip trackers. The as-built FTK system and components are described, as is the online software used to control them while running in the ATLAS data acquisition system. Also described is the simulation of the FTK hardware and the optimization of the AM pattern banks. An optimization for long-lived particles with large impact parameter values is included. A test of the FTK system with the data playback facility that allowed the FTK to be commissioned during the shutdown between Run 2 and Run 3 of the LHC is reported. The resulting tracks from part of the FTK system covering a limited eta-phi region of the detector are compared with the output from the FTK simulation. It is shown that FTK performance is in good agreement with the simulation.
|
|
| 8. |
- Andrean, Stefio Y., 1991-, et al.
(författare)
-
The ATLAS inner detector trigger performance in pp collisions at 13 TeV during LHC Run 2
- 2022
-
Ingår i: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 82:3
-
Tidskriftsartikel (refereegranskat)abstract
- The design and performance of the inner detector trigger for the high level trigger of the ATLAS experiment at the Large Hadron Collider during the 2016-2018 data taking period is discussed. In 2016, 2017, and 2018 the ATLAS detector recorded 35.6 fb(-1), 46.9 fb(-1), and 60.6 fb(-1) respectively of proton-proton collision data at a centre-of-mass energy of 13TeV. In order to deal with the very high interaction multiplicities per bunch crossing expected with the 13TeV collisions the inner detector trigger was redesigned during the long shutdown of the Large Hadron Collider from 2013 until 2015. An overview of these developments is provided and the performance of the tracking in the trigger for the muon, electron, tau and b-jet signatures is discussed. The high performance of the inner detector trigger with these extreme interaction multiplicities demonstrates how the inner detector tracking continues to lie at the heart of the trigger performance and is essential in enabling the ATLAS physics programme.
|
|
| 9. |
- Backman, Filip, 1991-, et al.
(författare)
-
Measurement of the inclusive t¯t production cross section in the lepton+jets channel in pp collisions at √s=7 TeV with the ATLAS detector using support vector machines
- 2023
-
Ingår i: Physical Review D. - : American Physical Society. - 2470-0010 .- 2470-0029. ; 108:3
-
Tidskriftsartikel (refereegranskat)abstract
- A measurement of the top quark pair-production cross section in the lepton+jets decay channel is presented. It is based on 4.6 fb−1 of √s=7 TeV pp collision data collected during 2011 by the ATLAS experiment at the CERN Large Hadron Collider. A three-class, multidimensional event classifier based on support vector machines is used to differentiate t¯t events from backgrounds. The t¯t production cross section is found to be σt¯t=168.5±0.7(stat) +6.2−5.9(syst) +3.4−3.2(lumi) pb. The result is consistent with the Standard Model prediction based on QCD calculations at next-to-next-to-leading order.
|
|
| 10. |
- Mullier, G.A., et al.
(författare)
-
Constraints on Higgs boson properties using W W∗(→ eνμν) j j production in 36.1 fb−1 of √s = 13 TeV pp collisions with the ATLAS detector
- 2022
-
Ingår i: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 82:7
-
Tidskriftsartikel (refereegranskat)abstract
- This article presents the results of two studies of Higgs boson properties using the W W∗(→ eνμν)j j final state, based on a dataset corresponding to 36.1fb−1of √s = 13 TeV proton–proton collisions recorded by the ATLAS experiment at the Large Hadron Collider. The first study targets Higgs boson production via gluon–gluon fusion and constrains the CP properties of the effective Higgs–gluon interaction. Using angular distributions and the overall rate, a value of tan(α) = 0.0 ± 0.4(stat.) ± 0.3(syst.) is obtained for the tangent of the mixing angle for CP-even and CP-odd contributions. The second study exploits the vector-boson fusion production mechanism to probe the Higgs boson couplings to longitudinally and transversely polarised Wand Z bosons in both the production and the decay of the Higgs boson; these couplings have not been directly constrained previously. The polarisation-dependent coupling strength scale factors are defined as the ratios of the measured polarisation-dependent coupling strengths to those predictedby the Standard Model, and are determined using rate and kinematic information to be aL = 0.91+0.10 −0.18(stat.)+0.09 −0.17(syst.)and aT = 1.2 ± 0.4(stat.)+0.2 −0.3(syst.). These coupling strengths are translated into pseudo-observables, resulting in κV V = 0.91+0.10 −0.18(stat.)+0.09 −0.17(syst.) and ϵV V = 0.13+0.28 −0.20(stat.)+0.08 −0.10(syst.). All results are consistent with the Standard Model predictions.
|
|
| 11. |
- Mullier, G.A., et al.
(författare)
-
Measurement of cross sections for production of a Z boson in association with a flavor-inclusive or doubly b-tagged large-radius jet in proton-proton collisions at Formula Presented with the ATLAS experiment
- 2023
-
Ingår i: Physical Review D. - : American Physical Society. - 2470-0010 .- 2470-0029. ; 108:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present measurements of cross sections for production of a leptonically decaying Z boson in association with a large-radius jet in 13 TeV proton-proton collisions at the LHC, using 36 fb - 1 of data from the ATLAS detector. Integrated and differential cross sections are measured at particle level in both a flavor inclusive and a doubly b -tagged fiducial phase space. The large-radius jet mass and transverse momentum, its kinematic relationship to the Z boson, and the angular separation of b -tagged small-radius track jets within the large-radius jet are measured. This measurement constitutes an important test of perturbative quantum chromodynamics in kinematic and flavor configurations relevant to several Higgs boson and beyond-Standard-Model physics analyses. The results highlight issues with modeling of additional hadronic activity in the flavor-inclusive selection, and a distinction between flavor-number schemes in the b -tagged phase space. © 2023 CERN, for the ATLAS Collaboration.
|
|
| 12. |
- Mullier, G.A., et al.
(författare)
-
Measurement of the top-quark mass using a leptonic invariant mass in pp collisions at √s = 13 TeV with the ATLAS detector
- 2023
-
Ingår i: Journal of High Energy Physics. - : Springer Science and Business Media Deutschland GmbH. - 1029-8479 .- 1126-6708. ; 2023:6
-
Tidskriftsartikel (refereegranskat)abstract
- A measurement of the top-quark mass (mt) in the tt¯ → lepton + jets channel is presented, with an experimental technique which exploits semileptonic decays of b-hadrons produced in the top-quark decay chain. The distribution of the invariant mass mℓμ of the lepton, ℓ (with ℓ = e, μ), from the W-boson decay and the muon, μ, originating from the b-hadron decay is reconstructed, and a binned-template profile likelihood fit is performed to extract mt. The measurement is based on data corresponding to an integrated luminosity of 36.1 fb−1 of s = 13 TeV pp collisions provided by the Large Hadron Collider and recorded by the ATLAS detector. The measured value of the top-quark mass is mt = 174.41 ± 0.39 (stat.) ± 0.66 (syst.) ± 0.25 (recoil) GeV, where the third uncertainty arises from changing the Pythia8 parton shower gluon-recoil scheme, used in top-quark decays, to a recently developed setup. [Figure not available: see fulltext.]. © 2023, The Author(s).
|
|
| 13. |
- Mullier, G.A., et al.
(författare)
-
Measurements of jet observables sensitive to b -quark fragmentation in t t ¯ events at the LHC with the ATLAS detector
- 2022
-
Ingår i: Physical Review D. - : American Physical Society (APS). - 2470-0010 .- 2470-0029. ; 106:3
-
Tidskriftsartikel (refereegranskat)abstract
- Several observables sensitive to the fragmentation of b quarks into b hadrons are measured using 36 fb-1 of s=13 TeV proton-proton collision data collected with the ATLAS detector at the LHC. Jets containing b hadrons are obtained from a sample of dileptonic tt¯ events, and the associated set of charged-particle tracks is separated into those from the primary pp interaction vertex and those from the displaced b-decay secondary vertex. This division is used to construct observables that characterize the longitudinal and transverse momentum distributions of the b hadron within the jet. The measurements have been corrected for detector effects and provide a test of heavy-quark-fragmentation modeling at the LHC in a system where the top-quark decay products are color connected to the proton beam remnants. The unfolded distributions are compared with the predictions of several modern Monte Carlo parton-shower generators and generator tunes, and a wide range of agreement with the data is observed, with p values varying from 5×10-4 to 0.98. These measurements complement similar measurements from e+e- collider experiments in which the b quarks originate from a color singlet Z/γ∗. © 2022 CERN.
|
|
| 14. |
- Mullier, G.A., et al.
(författare)
-
Search for quantum black hole production in lepton + jet final states using proton-proton collisions at vs = 13 TeV with the ATLAS detector
- 2024
-
Ingår i: Physical Review D. - : American Physical Society. - 2470-0010 .- 2470-0029. ; 109:3
-
Tidskriftsartikel (refereegranskat)abstract
- A search for quantum black holes in electron + jet and muon + jet invariant mass spectra is performed with 140 fb-1 of data collected by the ATLAS detector in proton-proton collisions at √s = 13 TeV at the Large Hadron Collider. The observed invariant mass spectrum of lepton + jet pairs is consistent with Standard Model expectations. Upper limits are set at 95% confidence level on the production cross section times branching fractions for quantum black holes decaying into a lepton and a quark in a search region with invariant mass above 2.0 TeV. The resulting quantum black hole lower mass threshold limit is 9.2 TeV in the Arkani-Hamed-Dimopoulos-Dvali model, and 6.8 TeV in the Randall-Sundrum model. © 2024 CERN, for the ATLAS Collaboration.
|
|
| 15. |
- Wallängen, Veronica, 1986-
(författare)
-
Performance Improvements for Particle Tracking Detectors in Extreme Rate and Radiation Environments
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In order to increase its discovery potential, the Large Hadron Collider (LHC) at CERN is being transformed into a higher luminosity machine expected to be operational around 2026. The number of particle collisions will increase by a factor of 10 beyond the current design value, which means that the detectors installed around the LHC are facing various new challenges. The most demanding challenges include handling the enormous data quantities that will be transferred from the front-end readout modules at significantly higher rates than previously, as well as the radiation effects that arise as a consequence of the intense particle flow and that cause damage to sensor elements and electronics.At the ATLAS experiment, a multipurpose detector operating at the LHC, the impact of the luminosity increase is especially severe for the silicon pixel tracking detector, being the central subsystem located closest to the particle interaction point and therefore exposed to the highest radiation dose and hit density. The extreme radiation doses that the pixel modules will be subject to will cause deformation of the sensor material structure and thus loss of the signals, which after subsequent digitization by the pixel readout chip must be transferred over relatively long distances through a low-mass data link, causing further signal distortion.The work presented here addresses both major challenges described and outlines solutions for the upcoming upgrade of the ATLAS pixel detector system with regards to these. Firstly, it is demonstrated how improved accuracy of detector simulations and reconstruction of particle trajectories through the detector can be achieved as higher particle fluences are approached, by modeling radiation damage effects that occur in the pixel sensors. Secondly, it is shown how a receiver integrated circuit utilizing an industry standard technique novel within high-energy physics applications has been designed as an integral part of a high-speed transmission link to efficiently restore the signal quality in order to achieve adequate data readout rates.
|
|
