| 1. |
- Wu, Xue, 1986, et al.
(författare)
-
Ammonium recovery from reject water combined with hydrogen production in a bioelectrochemical reactor
- 2013
-
Ingår i: Bioresource Technology. - : Elsevier BV. - 0960-8524 .- 1873-2976. ; 146, s. 530-536
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, a bioelectrochemical reactor was investigated for simultaneous hydrogen production and ammonium recovery from reject water, which is an ammonium-rich side-stream produced from sludge treatment processes at wastewater treatment plants. In the anode chamber of the reactor, microorganisms converted organic material into electrical current. The electrical current was used to generate hydrogen gas at the cathode with 96±6% efficiency. Real or synthetic reject water was fed to the cathode chamber where proton reduction into hydrogen gas resulted in a pH increase which led to ammonium being converted into volatile ammonia. The ammonia could be stripped from the solution and recovered in acid. Overall, ammonium recovery efficiencies reached 94% with synthetic reject water and 79% with real reject water. This process could potentially be used to make wastewater treatment plants more resource-efficient and further research is warranted.
|
|
| 2. |
- Hai, Faisal Ibney, et al.
(författare)
-
Application of membrane technology for the development of sustainable biotechnology processes
- 2013
-
Ingår i: Membrane Processes for Sustainable Growth. ; , s. 193-224
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- The scope of application of membranes in biotechnology has widened significantly in the recent years. Although many of the membrane options are yet to achieve wide industrial applications, they show tremendous potential for the transformation and synthesis of value-added products, energy production, therapeutic applications and environmental remediation. This chapter provides an overview of membrane applications in selected established and emerging biotechnology processes. Approaches to overcoming the technology bottlenecks that impede the scale-up of such systems have been discussed in this chapter.
|
|
| 3. |
- Hai, Faisal Ibney, et al.
(författare)
-
Biocatalytic membrane reactors for the removal of recalcitrant and emerging pollutants from wastewater
- 2013
-
Ingår i: Handbook of Membrane Reactors Volume 2: Reactor types and industrial applications. - : Elsevier. ; 2, s. 763-807
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- The potential fields of application of the biocatalytic membrane reactors have widened considerably in the recent years. Although biocatalytic membrane reactors, in general, are yet to achieve broad industrial applications, in the not too far future, they are expected to play a major role not only for the production, transformation and valorization of raw materials but also for environmental remediations. This chapter comprehensively reviews the laboratory scale studies which demonstrate the potential of biocatalytic membrane reactors in wastewater treatment applications. Studies reported in the literature, however, serves as proof of concept only. Issues that need to be addressed in order to achieve scale-up of such systems have been discussed in this chapter.
|
|
| 4. |
- Kharazmi, Parastou, 1977-
(författare)
-
Evaluation of Innovative Rehabilitation Technologies Utilising Polymer Composites for Aging Sewer Systems
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Water and wastewater sewer system maintenance is among the costliest aspects of infrastructure investment. The replacement of deteriorated lines is a difficult and expensive process that causes community disturbance and is generally not conducted fast enough to meet demand. To keep up with the rate of deterioration, the use of alternative rehabilitation technologies using polymer linings has increased significantly in recent years, both within Sweden and worldwide. Compared to the traditional pipe replacement method, these technologies are cost-effective, create less community disturbance, and offer a quick return to the service for the line. The main function of polymeric lining is to stabilise the condition of the pipeline, eliminate deterioration, and thereby extend the pipeline’s service life. Although rehabilitation technologies employing polymeric systems have been in use for over 30 years, there have been few technical assessments of either these technologies or the materials involved. Data gathered through the evaluation of these innovative technologies can make their benefits and limitations more widely understood, and can also be used to increase the effectiveness of the rehabilitation process in future.The main objective of this work was to contribute to an improved understanding of the most commonly used materials and methods employed in rehabilitation of wastewater and other applicable sewer lines in residential buildings in Sweden. The primary objective was not to prove that the emerging rehabilitation technologies work, but rather to increase knowledge of their weaknesses and strengths, identify any issues, and provide a technical assessment to support realistic expectations of pipeline rehabilitation. Gathering technical information in this way will help with the planning of future investigations; moreover, collecting extensive data will help to increase the effectiveness of the renewal works, aid progress in the field, and improve predictions regarding longevity and service life. As pipeline rehabilitation is still considered novel, and owing to the general lack of available data on the subject, a multi-approach study was carried out: this included evaluation of the polymeric materials’ performance in the presence of deteriorative factors, assessing the in-service state of the materials and lined sewers previously installed, monitoring the level of quality control implemented during previous rehabilitation works, and evaluating the environmental impacts of using pipe-lining technologies compared to pipe replacement. The techniques discussed included rehabilitation with epoxy and polyester resin-based lining materials, applied with brush-on and spray-on techniques, and cured-in-place pipe lining (installed by sending a resin-impregnated flexible tube inside the host pipe). Degradation of the resin-based lining materials was investigated via artificial aging involving immersion in water at elevated temperatures. The changes in materials that occurred during accelerated laboratory aging were tracked by means of various tests, including thermal and mechanical analyses, water absorption measurements and microscopy. The analysis focused on reinforced polyester-based and toughened epoxy-based lining materials in order to gain a better understanding of their performance as pipe lining. Moreover, the previously installed lined pipes and lining materials were also studied during laboratory examinations to evaluate the in-service performance of the materials and techniques under operating conditions over time, as well as to identify common defects. The state of the materials and the lined pipe were studied by means of different investigative methods, including visual inspection, microscopy, Fourier transform infrared spectroscopy, thickness measurement, thermal and mechanical analyses. This PhD work also includes an investigation to determine the level of quality control carried during some previous rehabilitation works. Data on the quality evaluation of previous rehabilitation works were gathered during visits to the work sites, as well as by analysing lined pipes that had already been installed. Finally, a comparative life-cycle assessment was undertaken to compare the environmental impacts of pipe replacement with those of alternative innovative rehabilitations, such as CIPP and coatings with polyester and epoxy polymeric systems. Data obtained from an LCA tool were used to facilitate comparison from an environmental perspective.Results from artificial aging in the lab indicated that the properties of polymeric lining materials changed significantly when high temperatures were combined with water exposure. However, the aging testing conducted for this study also found that the materials performed relatively well at temperatures close to the average temperatures inside sewerage systems. The results revealed that the polyester-based lining material was less sensitive when compared with epoxy-based lining materials during stimulated aging. Moreover, results from the in-service field demonstration (involving examination of 12 samples with up to 10 years of service, including reinforced polyester and modified epoxy linings or cured-in-place pipe (CIPP) lining) showed minimal evidence that the materials underwent significant deterioration after installation; instead, a majority of the common defects were found to be related to poor-quality installation practices. Because very few field samples were available to study, conclusions regarding overall performance could not be drawn. However, there is no evidence that these materials will not perform as expected during their service life when properly installed.Evaluating quality control of previous rehabilitation work revealed a gap between theory and practice where the level of quality control and documentation was concerned; furthermore, it also emerged that quality control and documentation is crucial to both the prevention of common issues and the overall effectiveness of the rehabilitation. Accordingly, a series of recommendations regarding the development of comprehensive quality control and quality assurance procedures (QC/QA) are provided in this work. These recommendations highlight the aspects that are most important to consider at each of several key stages (before installation, during installation, and after rehabilitation work is completed).Results from comparative life-cycle assessment (LCA) showed that alternative technologies, including cured-in-place (flexible sleeve) and coating techniques, have some advantages over pipe replacement from an environmental perspective. However, the choice to use one rehabilitation technology over another is a multi-stage decision-making process that should not be based solely on a single factor.This PhD work promotes an improved understanding of the limitations and benefits of polymeric lining through the testing performed and analyses conducted. This work highlights the need for improved quality control, and further suggests that developing a detailed and comprehensive quality control plan for each technology would provide higher and more consistent quality overall. The study also demonstrates that the long-term strength of any rehabilitation work depends on various factors, and that selecting one method over another must be a process based on extensive knowledge and understanding of each rehabilitation technology. No evidence was found to indicate that the materials could not perform well under working conditions if selected and installed appropriately. However, a larger number of field samples with longer in-service time and a more detailed technical history, along with a more extended experimental plan for laboratory investigations based on the results of this PhD work, will allow for the gathering of the data required to answer questions regarding life expectancy with a higher degree of certainty.
|
|
| 5. |
- Modin, Oskar, 1980
(författare)
-
A mathematical model of aerobic methane oxidation coupled to denitrification
- 2018
-
Ingår i: Environmental Technology (United Kingdom). - : Informa UK Limited. - 1479-487X .- 0959-3330. ; 39:9, s. 1217-1225
-
Tidskriftsartikel (refereegranskat)abstract
- Aerobic methanotrophic bacteria use methane as their only source of energy and carbon. They release organic compounds that can serve as electron donors for co-existing denitrifiers. This interaction between methanotrophs and denitrifiers is known to contribute to nitrogen losses in natural environments and has also been exploited by researchers for denitrification of nitrate-contaminated wastewater. The purpose of this study was to develop a mathematical model describing aerobic methane oxidation coupled to denitrification in suspended-growth reactors. The model considered the activities of three microbial groups: aerobic methanotrophs, facultative methylotrophs, and facultative heterotrophs. The model was tested against data from the scientific literature and used to explore the effects of the oxygen mass transfer coefficient, the solids retention time, and the fraction methane in the feed gas on nitrate removal. The fraction of methane in the feed gas was found to be critical for the nitrate removal rate. A value of about 15% in air was optimal. A lower methane fraction led to excess oxygen, which was detrimental for denitrification. A higher fraction led to oxygen-limitation, which restricted the growth rate of methanotrophs in the reactor.
|
|
| 6. |
- Modin, Oskar, 1980, et al.
(författare)
-
Hill-based dissimilarity indices and null models for analysis of microbial community assembly
- 2020
-
Ingår i: Microbiome. - : Springer Science and Business Media LLC. - 2049-2618. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundHigh-throughput amplicon sequencing of marker genes, such as the 16S rRNA gene in Bacteria and Archaea, provides a wealth of information about the composition of microbial communities. To quantify differences between samples and draw conclusions about factors affecting community assembly, dissimilarity indices are typically used. However, results are subject to several biases, and data interpretation can be challenging. The Jaccard and Bray-Curtis indices, which are often used to quantify taxonomic dissimilarity, are not necessarily the most logical choices. Instead, we argue that Hill-based indices, which make it possible to systematically investigate the impact of relative abundance on dissimilarity, should be used for robust analysis of data. In combination with a null model, mechanisms of microbial community assembly can be analyzed. Here, we also introduce a new software, qdiv, which enables rapid calculations of Hill-based dissimilarity indices in combination with null models.ResultsUsing amplicon sequencing data from two experimental systems, aerobic granular sludge (AGS) reactors and microbial fuel cells (MFC), we show that the choice of dissimilarity index can have considerable impact on results and conclusions. High dissimilarity between replicates because of random sampling effects make incidence-based indices less suited for identifying differences between groups of samples. Determining a consensus table based on count tables generated with different bioinformatic pipelines reduced the number of low-abundant, potentially spurious amplicon sequence variants (ASVs) in the data sets, which led to lower dissimilarity between replicates. Analysis with a combination of Hill-based indices and a null model allowed us to show that different ecological mechanisms acted on different fractions of the microbial communities in the experimental systems.ConclusionsHill-based indices provide a rational framework for analysis of dissimilarity between microbial community samples. In combination with a null model, the effects of deterministic and stochastic community assembly factors on taxa of different relative abundances can be systematically investigated. Calculations of Hill-based dissimilarity indices in combination with a null model can be done in qdiv, which is freely available as a Python package (https://github.com/omvatten/qdiv). In qdiv, a consensus table can also be determined from several count tables generated with different bioinformatic pipelines.
|
|
| 7. |
- Modin, Oskar, 1980, et al.
(författare)
-
Three promising applications of microbial electrochemistry for the water sector
- 2017
-
Ingår i: Environmental Science: Water Research and Technology. - : Royal Society of Chemistry (RSC). - 2053-1419 .- 2053-1400. ; 3:3, s. 391-402
-
Tidskriftsartikel (refereegranskat)abstract
- Microbial electrochemical technologies are based on the interactions between living microorganisms and electrodes. There is a wide range of possible applications and many are highly relevant for the water sector. The most well-known is probably the microbial fuel cell, which has been proposed as an environmentally-friendly process for simultaneous wastewater treatment and electrical energy production. However, fullscale implementation at wastewater treatment plants is very challenging and there are several other applications of microbial electrochemistry that are less well-known to people outside the research field, but potentially could be widely applied and make an impact on the water sector in a shorter time perspective. In this paper, we highlight three such applications: (i) sensors for biochemical oxygen demand, volatile fatty acids and toxicity; (ii) in situ bioremediation of contaminated sites; and (iii) removal and recovery of metals from wastewaters, leachates and brines.
|
|
| 8. |
- Pawar, Sudhanshu S., et al.
(författare)
-
MultiBio: Environmental services from a multipurpose biorefinery
- 2020
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- MultiBio project aimed to establish and demonstrate a novel multipurpose biorefinery cascade concept, producing three renewable biobased products: 1) biohydrogen, 2) biopolymers and 3) protein rich meal ingredients for fish farming. The cascade concept exploits the ability of a bacterium (Caldicellulosiruptor saccharolyticus) to transform nutrients present in low-value waste process waters of the pulp and paper industry, to high-value products hydrogen gas, organic acids and microbial biomass. The organic acid rich effluent will then be managed in an open culture microbial process used to achieve discharge water quality objectives and to produce polyhydroxyalkanoate (PHA) biopolymers. Moreover, since C. saccharolyticus protein content is more than 63% of cell dry weight, their potential in formulation of fish feed was evaluated. A fiber sludge containing, CTMP residual stream was found to be a possible feedstock for the MultiBio process concept. Due to safety risks the demo-scale experiments of biohydrogen gas technology were moved from Biorefinery demo plant (Örnsköldsvik) of 40 m3 capacity to ATEX classified pilot-scale facility with 0.4 m3 capacity. Hence, bacterial biomass enough for the large-scale fish feed ingredient could not be produced. Lab-scale experiments with Caldicellulosiruptor cells as fish feed ingredient showed promising results as a protein-rich, sustainable fish feed ingredient. In addition, PHA biopolymer also showed favourable results as fish food ingredient for experiments at Gårdsfisk AB. Lab-scale experimental tests showed that the surplus activated sludge from the mills wastewater treatment could currently accumulate PHA to about 20 % of its dry weight. Mass balance evaluations based on realistically achievable expectations indicated a PHA biopolymer production potential of 3 600 tons of PHA per year from available organic residuals and for the two evaluated mills combined. The MultiBio concept has a positive climate impact in comparison with current treatment and moves developments in a positive direction to achieve 7 of the 10 Swedish environmental goals. Through a detailed feasibility analysis, a natural progression in next steps in scenarios were suggested for PHA production. The MultiBio cascade process can be implemented with further necessary development with good business potential and a positive effect on climate change. However, biohydrogen technology needs further developments before this cascade process concept can be implemented. Alternatively, a scenario with only biopolymer technology shows already a significant business potential and even larger positive effect on climate change. A successful next step in demonstration of the PHA biopolymer production scenario may lead to it being implemented within the next few years. Furthermore, MultiBio has attracted a lot of attention regionally and nationally but also internationally with a total of 65 media listings. A licentiate thesis and three university degree projects linked to the project have been completed. Overall, the MultiBio project has successfully achieved its goals and objectives.
|
|
| 9. |
|
|
| 10. |
- Timmusk, Salme, et al.
(författare)
-
Sfp-type PPTase inactivation promotes bacterial biofilm formation and ability to enhance wheat drought tolerance
- 2015
-
Ingår i: Frontiers in Microbiology. - : Frontiers Media SA. - 1664-302X. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- Paenibacillus polymyxa is a common soil bacterium with broad range of practical applications. An important group of secondary metabolites in P polymyxa are non-ribosomal peptide and polyketide derived metabolites (NRPs/PKs). Modular non-ribosomal peptide synthetases catalyze main steps in the biosynthesis of the complex secondary metabolites. Here we report on the inactivation of an A26 Sfp-type 4'-phosphopantetheinyl transferase (Sfp-type PPTase). The inactivation of the gene resulted in loss of NRPs/PKs production. In contrast to the former Bacillus spp. model the mutant strain compared to wild type showed greatly enhanced biofilm formation ability. A26 Delta sfp biofilm promotion is directly mediated by NRPs/PKs, as exogenous addition of the wild type metabolite extracts restores its biofilm formation level. Wheat inoculation with bacteria that had lost their Sfp-type PPTase gene resulted in two times higher plant survival and about three times increased biomass under severe drought stress compared to wild type. Challenges with P. polymyxa genetic manipulation are discussed.
|
|
| 11. |
- Wadström, Christoffer, et al.
(författare)
-
Exploring total economic values in an emerging urban circular wastewater system
- 2023
-
Ingår i: Water Research. - : Elsevier BV. - 1879-2448 .- 0043-1354. ; 233
-
Forskningsöversikt (refereegranskat)abstract
- Circular water management has the potential to close resource and material loops within and across value chains. In the water industry, circular municipal wastewater management through industrial urban symbiosis (IUS) is recognized as a solution to overcome water scarcity in urban environments. IUS involves collaboration between actors with different organizational backgrounds, which can lead to inherent risks of conflicting goals. This study explores how different values drive various organizations to participate in an emerging circular wastewater collaboration. The study comprises a literature review of 34 scientific articles and a case study of a potential circular wastewater system through IUS in Simrishamn, Sweden. It presents an interdisciplinary framework based on the total economic value concept and organizational archetypes for examining actor values in circular wastewater management. This framework provides a novel approach for assessing different values and how they may compete or align. It can also identify the absence of certain values, enabling the achievement of a minimum level of value coherence amongst different actors, and thereby increasing the sustainability and effectiveness of circular wastewater collaborations. Therefore, careful planning and stakeholder interaction, in accordance with economic value perspectives, can enhance the legitimacy and policy development of circular solutions.
|
|
| 12. |
|
|
| 13. |
- Abadikhah, Marie, 1992
(författare)
-
Influence of electrode material and stochastic factors on the performance and microbial community assembly in microbial electrochemical systems
- 2022
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Microbial electrolysis cells (MECs) are systems with microbial communities in the form of biofilms on electrode surfaces. The electrogenic bacteria in the anode biofilm act as catalysts for the oxidization of organic compounds, leading to release of electrons, generation of electrical current, and production of hydrogen and methane at the cathode. In addition to production of energy carriers, MECs can be used for other applications as well; for example, as biosensors to monitor biochemical oxygen demand or toxicity. The performance of MECs is determined by both deterministic and stochastic factors influencing the microbial communities on the electrode surfaces, most of which as still poorly understood. In this thesis, the effects of electrode materials on microbial community assembly and MEC performance was investigated. Two experiments were carried out. In the first, three cathode materials (carbon nanoparticles, titanium, and steel) were compared. In the second, three anode materials (carbon cloth, graphene, and nickel) were compared. The cathode materials had no significant effect on the performance of the MECs, as opposed to the anode materials where carbon cloth MECs had the highest current density and the shortest lag time during startup. The differences seen in lag time of replicate systems at the start of the experiment indicated a stochastic initial attachment of the electrogenic bacteria on the anode. Different microbial communities develop in the biofilms on the anodes and cathodes. Electrogens from the Desulfobacterota phylum dominated the anode, while various hydrogenotrophic methanogens, e.g., Methanobacterium, were found to dominate on the cathodes. Diversity and null model analysis of the electrode communities highlighted stochasticity and not electrode material as the important factor in the community assembly. Network analysis showed that the cathode communities had fewer negative interactions between taxa in comparison to the anode. Since hydrogen gas generated at the cathode surface can diffuse through the biofilm, all microorganisms on the cathode have access to the substrate, reducing the need for competition between species. In contrast, electrogens require a short distance to the anode to be able to use it as electron acceptor. Limited space on the anode and competition between electrogens shaped the anode communities and explain the higher number of negative interactions observed. Based on the findings in this thesis, it is suggested that stochastic factors have more influence than electrode material on the anode community even though there is a selective pressure for electrogenic bacteria.
|
|
| 14. |
- Albers, Eva, 1966, et al.
(författare)
-
Influence of preservation methods on biochemical composition and downstream processing of cultivated Saccharina latissima biomass
- 2021
-
Ingår i: Algal Research. - : Elsevier BV. - 2211-9264. ; 55
-
Tidskriftsartikel (refereegranskat)abstract
- Saccharina latissima biomass cultivated along the Swedish west coast was subjected to four different scalable preservation methods after harvest; freezing, sun-drying, oven-drying and ensiling. Freeze-drying and freezing at -80 ?C were also included to provide dry and wet references. The effects of the different preservation methods on the composition of Saccharina biomass (on dry weight, DW, basis), and the recovery as well as properties of high-quality protein, alginate and biogas were evaluated. Sun-drying significantly reduced protein, alginate and fatty acid content of the seaweeds and thereby concentrated ash in the biomass compared to the other methods. Protein/amino acids and fatty acids were significantly concentrated in ensiled biomass, while mannitol and laminarin were reduced compared to the other biomasses. Oven-drying and -20 ?C freezing affected the composition the least, with lower ash content and alterations in some specific amino and fatty acids. Sun-drying and ensiling resulted in significantly lower protein solubility at high pH compared to the other biomasses which translated into the lowest total seaweed protein recovery using the pH-shift process. Highest protein yield was obtained with the freeze-dried reference. Ensiling lead to a significant decrease in the molecular weight of alginate, while sun-drying caused a negative effect on alginate by inducing a shift in the guluronic and mannuronic acids composition of alginate. Sun-drying gave the lowest methane yield in the anaerobic digestion experiments while freezing at -80 ?C gave the highest yield, closely followed by freezing at -20 ?C and ensiling. To conclude, preservation methods must be carefully chosen to protect the valuable component in Saccharina latissima, and to achieve an efficient downstream processing ultimately yielding high quality products as part of a seaweed biorefinery.
|
|
| 15. |
- Beijer, Kristina, et al.
(författare)
-
Removal of pharmaceuticals and unspecified contaminants in sewage treatment effluents by activated carbon filtration and ozonation : Evaluation using biomarker responses and chemical analysis
- 2017
-
Ingår i: Chemosphere. - : Elsevier BV. - 0045-6535 .- 1879-1298. ; 176, s. 342-351
-
Tidskriftsartikel (refereegranskat)abstract
- Traces of active pharmaceutical ingredients (APIs) and other chemicals are demonstrated in effluents from sewage treatment plants (STPs) and they may affect quality of surface water and eventually drinking water. Treatment of effluents with granular activated carbon (GAC) or ozone to improve removal of APIs and other contaminants was evaluated at two Swedish STPs, Kappala and Uppsala (88 and 103 APIs analyzed). Biomarker responses in rainbow trout exposed to regular and additionally treated effluents were determined. GAC and ozone treatment removed 87-95% of the total concentrations of APIs detected. In Kappala, GAC removed 20 and ozonation (7 g O-3/m(3)) 21 of 24 APIs detected in regular effluent. In Uppsala, GAC removed 25 and ozonation (5.4 g O-3/m(3)) 15 of 25 APIs detected in effluent. GAC and ozonation also reduced biomarker responses caused by unidentified pollutants in STP effluent water. Elevated ethoxyresorufin-O-deethylase (EROD) activity in gills was observed in fish exposed to effluent in both STPs. Gene expression analysis carried out in Kappala showed increased concentrations of cytochrome P450 (CYP1A5 and CYP1C3) transcripts in gills and of CYP1As in liver of fish exposed to effluent. In fish exposed to GAC- or ozone-treated effluent water, gill EROD activity and expression of CYP1As and CYP1C3 in gills and liver were generally equal to or below levels in fish held in tap water. The joint application of chemical analysis and sensitive biomarkers proved useful for evaluating contaminant removal in STPs with new technologies.
|
|
| 16. |
- Betsholtz, Alexander, et al.
(författare)
-
Tracking 14C-labeled organic micropollutants to differentiate between adsorption and degradation in GAC and biofilm processes
- 2021
-
Ingår i: Environmental Science and Technology. - : The American Chemical Society (ACS). - 0013-936X .- 1520-5851. ; 55:16, s. 11318-11327
-
Tidskriftsartikel (refereegranskat)abstract
- Granular activated carbon (GAC) filters can be used to reduce emissions of organic micropollutants via municipal wastewater, but it is still uncertain to which extent biological degradation contributes to their removal in GAC filters. 14C-labeled organic micropollutants were therefore used to distinguish degradation from adsorption in a GAC-filter media with associated biofilm. The rates and extents of biological degradation and adsorption were investigated and compared with other biofilm systems, including a moving bed biofilm reactor (MBBR) and a sand filter, by monitoring 14C activities in the liquid and gas phases. The microbial cleavage of ibuprofen, naproxen, diclofenac, and mecoprop was confirmed for all biofilms, based on the formation of 14CO2, whereas the degradation of 14C-labeled moieties of sulfamethoxazole and carbamazepine was undetected. Higher degradation rates for diclofenac were observed for the GAC-filter media than for the other biofilms. Degradation of previously adsorbed diclofenac onto GAC could be confirmed by the anaerobic adsorption and subsequent aerobic degradation by the GAC-bound biofilm. This study demonstrates the potential use of 14C-labeled micropollutants to study interactions and determine the relative contributions of adsorption and degradation in GAC-based treatment systems.
|
|
| 17. |
- Bodlund, Ida, 1983-
(författare)
-
Coagulant Protein from plant materials: Potential Water Treatment Agent
- 2013
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Access to fresh water is a human right, yet more than 780 million people, especially in rural areas, rely on unimproved sources and the need for finding ways of treating water is crucial. Although the use of natural coagulant protein in drinking water treatment has been discussed for a long time, the method is still not in practice, probably due to availability of material and limited knowledge. In this study, about hundred different crude extracts made from plant materials found in Southern India were screened for coagulation activity. Extracts of three Brassica species (Mustard, Cabbage and Cauliflower) were showing activity comparable to that of Moringa oleifera and were further investigated. Their protein content and profile were compared against each other and with coagulant protein from Moringa. Mustard (large) and Moringa seed proteins were also studied for their effect against clinically isolated bacterial strains. The protein profiles of Brassica extract showed predominant bands around 9kDa and 6.5kDa by SDS-PAGE. The peptide sequence analysis of Mustard large identified the 6.5kDa protein as Moringa coagulant protein (MO2.1) and the 9kDa protein band as seed storage protein napin3. Of thirteen clinical strains analysed, Moringa and Mustard large were proven effective in either aggregation activity or growth kinetic method or both in all thirteen and nine strains respectively. To my knowledge this is the first report on the presence of coagulant protein in Brassica seeds. Owing to the promising results Brassica species could possibly be used as a substitute to Moringa coagulating agent and chemicals in drinking water treatment.
|
|
| 18. |
- Burzio, Cecilia, 1991
(författare)
-
Removal of Organic Micropollutants from Wastewater in Biofilm Systems
- 2020
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The presence of organic hazardous substances in the aquatic environment, such as pharmaceutically active compounds and personal care products, has become a worldwide issue of increasing environmental concern. Present at concentration of nano- to milligram per liter, they are defined as organic micropollutants (OMPs). Wastewater treatment plants (WWTPs) have been recognized as the main route of emission of OMPs into the environment and as hotspot for antibiotic resistance. Not being designed for the elimination of micropollutants, the removal is often incomplete, resulting in continuous discharge. Therefore, research currently focuses on the enhancement of conventional WWTPs via physical-chemical and biological treatment processes. Among biological processes, biofilm-based treatment technologies have been found more efficient in the biotransformation of OMPs than conventional activated sludge treatment processes. Aerobic granular sludge (AGS) is a form of free-floating biofilm technique for simultaneous removal of organic carbon, nitrogen, and phosphorus in a single process step. The longer solid retention time, the higher concentration and microbial diversity and the presence of micro-niches of different redox conditions are features of AGS that make this system very attractive for the removal of OMPs. An in-depth understanding of the fate of OMPs in such systems under different operational conditions is still required. The present work investigates the degradation mechanisms of OMPs in biomass from both full-scale treatment plants and laboratory reactors. Specifically, it focuses on the impact of different conformations of AGS on the sorption of selected pharmaceuticals and the potential of different biofilm systems at the full scale WWTP to eliminate OMPs.
|
|
| 19. |
- Devlin, Yuka, et al.
(författare)
-
On site landfill leachate treatment : investigations into economical and environmental sustainable systmes for Northern Ireland
- 2017
-
Ingår i: Ebook: Proceedings of 11th European Waste Water Management Conference.
-
Konferensbidrag (populärvet., debatt m.m.)abstract
- This paper presents the potential for the Swedish Laqua system to be used as a sustainable method for on-site landfill leachate management in Northern Ireland, specifically the potential to use locally sourced filter materials from Northern Ireland as part of the filter system. Four carbon containing ashes and four types of peat were tested over a 24 hours period by a shaking test with untreated landfill leachate. Considering the results of this screening test, and the economical and sustainable supply of filter materials, one combination of ash and peat was selected to be column tested. Column testing with artificial leachate containing 7 organic pollutants (3 PAHs and 4 PCBs) and 9 inorganic pollutants showed that locally sourced filter materials effectively removed both organic and inorganic pollutants. A subsequent column test with landfill leachate for 13 weeks demonstrated it was feasible to apply the Laqua system with economical locally sourced filter materials.
|
|
| 20. |
- Ekholm, Jennifer, 1992
(författare)
-
Application of aerobic granular sludge for municipal wastewater treatment - Process performance and microbial community dynamics under fluctuating conditions
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Pressures of growing cities, competition for use of urban areas and higher influent loads, are pushing for innovative technologies for wastewater treatment with low demands for land footprint and costs. Furthermore, wastewater treatment is needed to move towards a circular economy by harvest of valuable resources such as nutrients and energy. Aerobic granular sludge (AGS) is a biofilm process without a carrier material for wastewater treatment, exhibiting efficient treatment performance, excellent settleability, high biomass retention, tolerance to toxicity and high loads of organic matter. In this thesis, the first implementation of the AGS process in the Nordic countries was studied to assess the treatment performance, microbial community structure, energy usage, land footprint, and volume needs. The results in this project suggested that selective sludge withdrawal, retaining long solids retention time, sufficient substrate availability, and operational flexibility are important factors for granulation. Both the AGS and parallel conventional activated sludge (CAS) process achieved stable organic matter, nitrogen, and phosphorus removal with low average effluent concentrations. Seasonal variations and environmental factors were identified as important for microbial community succession. The granular biofilm demonstrated higher biomass concentration, diversity, and lower seasonal fluctuations in community composition than the flocculent sludge. A one-year energy comparison resulted in lower specific energy usages (kWh m-3 and kWh reduced P.E.-1) and land footprint for the AGS compared to the CAS process. However, a potential for decreased energy usage was recognised for both systems, leading to the conclusion that operational optimisation and process design might be as important as the type of technology. Additionally, the influence of decreasing temperature on AGS was studied in lab-scale reactors, revealing different responses of the functional groups in the microbial community, and even various response of ASVs at the genus level. In conclusion, the AGS technology for municipal wastewater treatment under fluctuating conditions achieved low average effluent concentrations, was more compact and energy efficient compared to the CAS.
|
|
| 21. |
- Forss, Jörgen, 1973-, et al.
(författare)
-
Microbial biotreatment of actual textile wastewater in a continuous sequential rice husk biofilter and the microbial community involved
- 2017
-
Ingår i: PLOS ONE. - : PLOS. - 1932-6203. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Textile dying processes often pollute wastewater with recalcitrant azo and anthraquinone dyes. Yet, there is little development of effective and affordable degradation systems for textile wastewater applicable in countries where water technologies remain poor. We determined biodegradation of actual textile wastewater in biofilters containing rice husks by spectrophotometry and liquid chromatography mass spectrometry. The indigenous microflora from the rice husks consistently performed >90% decolorization at a hydraulic retention time of 67 h. Analysis of microbial community composition of bacterial 16S rRNA genes and fungal internal transcribed spacer (ITS) gene fragments in the biofilters revealed a bacterial consortium known to carry azoreductase genes, such as Dysgonomonas, and Pseudomonas and the presence of fungal phylotypes such as Gibberella and Fusarium. Our findings emphasize that rice husk biofilters support a microbial community of both bacteria and fungi with key features for biodegradation of actual textile wastewater. These results suggest that microbial processes can substantially contribute to efficient and reliable degradation of actual textile wastewater. Thus, development of biodegradation systems holds promise for application of affordable wastewater treatment in polluted environments.
|
|
| 22. |
- Granström, Karin, 1974-, et al.
(författare)
-
Biogas from algae farmed in pulp and paper mill wastewater
- 2015
-
Ingår i: GGROS 2015, Örnsköldsvik, Sweden, 23-25 March 2015..
-
Konferensbidrag (refereegranskat)abstract
- Pulp and paper mills have waste streams that can be used for the farming of algae. The mills wastewater treatment provides heat to the algae ponds and the flue gas provides carbon dioxide. A current project is aiming at producing oil, for biodiesel or lubricating oil, from mill-farmed algae. Ten pools have been constructed and seeded with different strains of algae. After harvest and separation of oil, there is a leftover algae pulp. The fate of this algae remnant is an important part in achieving economic and energy viability for the whole process.The purpose of this work was to study the potential to produce biogas from algae grown in pulp and paper mill wastewaters, for different algae strains and pond conditions, with differing degrees of oil separation before the anaerobic digestion stage. The methane potential of the various algae pulps was tested by anaerobic digestion batch assays under thermophilic conditions for 23 days. Pre-treatment of substrate is sometimes done in order to reduce the necessary retention time of biogas production. One batch of algae was subjected to either thermal pre-treatment or NaOH or comminution, to assess the effect on these methods on methane production.Ammonia concentration and pH in the digestate was analyzed to monitor the anaerobic digestion process, and the algae pulp’s content of fat, protein and carbohydrates were analyzed to characterize the substrate. In addition, the dewaterability of algae and of algae digestate was examined, as the dewaterability affects transport costs and possible use of the digestate.During the first year of operation, the algae in the range pond produced 186 ml CH4/g VS. The pre-treatments did not significantly affect the methane potential. The second year of operation saw more adapted strains of algae which are expected to produce somewhat different results [data from these experiments can be presented at the conference]. The research is of importance for the development of the biogas market as new substrates are needed to reach the volumes that are necessary to achieve economic viability for biogas plants. By characterizing the algae, it should be easier to see which role they are suitable to play in a co-digestion mix. Furthermore, the production of bio-oil and biogas together benefit the bioenergy system as a whole.
|
|
| 23. |
|
|
| 24. |
- Modin, Oskar, 1980, et al.
(författare)
-
Bioelectrochemical recovery of Cu, Pb, Cd, and Zn from dilute solutions
- 2012
-
Ingår i: Journal of Hazardous Materials. - : Elsevier BV. - 1873-3336 .- 0304-3894. ; 235-236, s. 291-297
-
Tidskriftsartikel (refereegranskat)abstract
- In a microbial bioelectrochemical system (BES) living microorganisms catalyze the anodic oxidation of organic matter at a low anode potential. We used a BES with a biological anode to power the cathodic recovery of Cu, Pb, Cd, and Zn from a simulated municipal solid waste incineration ash leachate. By varying the control of the BES, the four metals could sequentially be recovered from a mixed solution by reduction on a titanium cathode. First, the cell voltage was controlled at zero, which allowed recovery of Cu from the solution without an electrical energy input. Second, the cathode potential was controlled at -0.51 V to recover Pb, which required an applied voltage of about 0.34 V. Third, the cathode potential was controlled at -0.66V to recover Cd, which required an applied voltage of 0.51 V. Finally, Zn was the only metal remaining in solution and was recovered by controlling the anode at +0.2 V to maximize the generated current. The study is the first to demonstrate that a BES can be used for cathodic recovery of metals from a mixed solution, which potentially could be used not only for ash leachates but also for e.g. metallurgical wastewaters and landfill leachates.
|
|
| 25. |
- Nilsson, Charlotte, et al.
(författare)
-
Efficacy of reactive mineral-based sorbents for phosphate, bacteria, nitrogen and TOC removal - Column experiment in recirculation batch mode
- 2013
-
Ingår i: Water Research. - Oxford, United Kingdom : Elsevier BV. - 0043-1354 .- 1879-2448. ; 47:14, s. 5165-5175
-
Tidskriftsartikel (refereegranskat)abstract
- Two mineral-based materials (Polonite and Sorbulite) intended for filter wells in on-site wastewater treatment were compared in terms of removal of phosphate (PO4-P), total inorganic nitrogen (TIN), total organic carbon (TOC) and faecal indicator bacteria (Escherichia coli and Enterococci). Using an innovative, recirculating system, septic tank effluent was pumped at a hydraulic loading rate of 3000 L m(2) d(-1) into triplicate bench-scale columns of each material over a 90-day period. The results showed that Polonite performed better with respect to removal of PO4-P, retaining on average 80% compared with 75% in Sorbulite. This difference was attributed to higher CaO content in Polonite and its faster dissolution. Polonite also performed better in terms of removal of bacteria because of its higher pH value. The total average reduction in E. coli was 60% in Polonite and 45% in Sorbulite, while for Enterococci the corresponding value was 56% in Polonite and 34% in Sorbulite. Sorbulite removed TIN more effectively, with a removal rate of 23%, while Polonite removed 11% of TIN, as well as TOC. Organic matter (measured as TOC) was accumulated in the filter materials but was also released periodically. The results showed that Sorbulite could meet the demand in removing phosphate and nitrogen with reduced microbial release from the wastewater treatment process.
|
|
