| 1. |
- Munthe, Christian, 1962
(författare)
-
Precaution and Ethics: Handling risks, uncertainties and knowledge gaps in the regulation of new biotechnologies
- 2017
-
Bok (övrigt vetenskapligt/konstnärligt)abstract
- This volume outlines and analyses ethical issues actualized by applying a precautionary approach to the regulation of new biotechnologies. It presents a novel way of categorizing and comparing biotechnologies from a precautionary standpoint. Based on this, it addresses underlying philosophical problems regarding the ethical assessment of decision-making under uncertainty and ignorance, and discusses how risks and possible benefits of such technologies should be balanced from an ethical standpoint. It argues on conceptual and ethical grounds for a technology neutral regulation as well as for a regulation that not only checks new technologies but also requires old, inferior ones to be phased out. It demonstrates how difficult ethical issues regarding the extent and ambition of precautionary policies need to be handled by such a regulation, and presents an overarching framework for doing so.
|
|
| 2. |
- Eivazihollagh, Alireza, et al.
(författare)
-
On chelating surfactants : Molecular perspectives and application prospects
- 2019
-
Ingår i: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322 .- 1873-3166. ; 278, s. 688-705
-
Tidskriftsartikel (refereegranskat)abstract
- Chelating agents, molecules that very strongly coordinates certain metal ions, are used industrially as well as in consumer products to minimize disturbances and increase performance of reactions and applications. The widely used sequestering agents, nitrilotriacetic acid (NTA), ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA) belong to this branch of readily water-soluble compounds. When these chemical structures also have hydrophobic parts, they are prone to adsorb at air-water interfaces and to self-assemble. Such bifunctional molecules can be called chelating surfactants and will have more extended utilization prospects than common chelating agents or ordinary ionic surfactants. The present review attempts to highlight the fundamental behavior of chelating surfactants in solution and at interfaces, and their very specific interactions with metal ions. Methods to recover chelating surfactants from metal chelates are also described. Moreover, utilization of chelating surfactants in applications for metal removal in environmental engineering and mineral processing, as well as for metal control in the fields of biology, chemistry and physics, is exemplified and discussed.
|
|
| 3. |
- Munthe, Christian, 1962
(författare)
-
The Price of Precaution and the Ethics of Risk
- 2011
-
Bok (övrigt vetenskapligt/konstnärligt)abstract
- Since a couple of decades, the notion of a precautionary principle plays a central and increasingly influential role in international as well as national policy and regulation regarding the environment and the use of technology. Urging society to take action in the face of potential risks of human activities in these areas, the recent focus on climate change has further sharpened the importance of this idea. However, the idea of a precautionary principle has also been problematised and criticised by scientists, scholars and policy activists, and been accused of almost every intellectual sin imaginable: unclarity, impracticality, arbitrariness and moral as well as political unsoundness. In that light, the very idea of precaution as an ideal for policy making rather comes out as a dead end. On the basis of these contrasting starting points, Christian Munthe undertakes an innovative, in-depth philosophical analysis of what the idea of a precautionary principle is and should be about. A novel theory of the ethics of imposing risks is developed and used as a foundation for defending the idea of precaution in environmental and technological policy making against its critics, while at the same time avoiding a number of identified flaws. The theory is shown to have far-reaching consequences for areas such as bio-, information- and nuclear technology, and global environmental policy in areas such as climate change. The author argues that, while the price we pay for precaution must not be too high, we have to be prepared to pay it in order to act ethically defensible. A number of practical suggestions for precautionary regulation and policy making are made on the basis of this, and some challenges to basic ethical theory as well as consumerist societies, the global political order and liberal democracy are identified
|
|
| 4. |
- Petersson, Jesper, 1974
(författare)
-
Blurring the shoreline: De- and re-infrastructuring and the changing colors of European flood policy
- 2021
-
Ingår i: Environment and Planning E: Nature and Space. - : SAGE Publications. - 2514-8494 .- 2514-8494 .- 2514-8486. ; 4:2, s. 623-644
-
Tidskriftsartikel (refereegranskat)abstract
- This paper provides a genealogy of the emergence of a common EU flood policy, including the scope and direction of this policy. Noticing how EU policy proposes green infrastructure (associated with using nature as a buffer zone in managing floods) as an alternative to grey infrastructure (implying fixed installations of concrete and cement), this paper adopts the theoretical lens of the so-called infrastructural turn, which advocates a relational investigation of infrastructure. By engaging this approach, the paper shows how flood infrastructure can contain very different compositions of (unruly) water and (settled) land. A narrative of a historically strong focus on guarding society from the powerful forces of nature through a fixed line of defense is increasingly giving way to more muddy states—quite literally—where society is expected to learn to live with flooding and show ecological consideration. To capture the EU’s, and especially the European Commission’s efforts to establish a pan-European flood infrastructure that accommodates this turn, the concepts of de- and re-infrastructuring are developed. These concepts act as heuristic devices to capture how policy performs some combinations between water and land as constituting an attractive and functional flood infrastructure, but constitutes other infrastructural relations of the aquatic and the terrestrial as undesirable and, hence, as malfunctioning. This performative act of distinguishing between what constitutes “good and proper” versus “bad and undesirable” infrastructure is referred to as a politics of infrastructure.
|
|
| 5. |
- Ekener, Elisabeth, 1963-, et al.
(författare)
-
Developing Life Cycle Sustainability Assessment methodology by applying values-based sustainability weighting - Tested on biomass based and fossil transportation fuels
- 2018
-
Ingår i: Journal of Cleaner Production. - : Elsevier BV. - 0959-6526 .- 1879-1786. ; 181, s. 337-351
-
Tidskriftsartikel (refereegranskat)abstract
- The production and use of transportation fuels can lead to sustainability impacts. Assessing them simultaneously in a holistic way is a challenge. This paper examines methodology for assessing the sustainability performance of products in a more integrated way, including a broad range of social impacts. Life Cycle Sustainability Assessment (LCSA) methodology is applied for this assessment. LSCA often constitutes of the integration of results from social LCA (S-LCA), environmental life cycle assessment (E-LCA) and life cycle costing (LCC). In this study, an S-LCA from an earlier project is extended with a positive social aspect, as well as refined and detailed. E-LCA and LCC results are built from LCA database and literature. Multi Criteria Decision Analysis (MCDA) methodology is applied to integrate the results from the three different assessments into an LCSA. The weighting of key sustainability dimensions in the MCDA is performed in different ways, where the sustainability dimensions are prioritized differently priority based on the assumed values of different stakeholder profiles (Egalitarian, Hierarchist, and Individualist). The developed methodology is tested on selected biomass based and fossil transportation fuels - ethanol produced from Brazilian sugarcane and US corn/maize, and petrol produced from Russian and Nigerian crude oils, where it delineates differences in sustainability performance between products assessed. The outcome in terms of relative ranking of the transportation fuel chains based on sustain ability performance differs when applying different decision-maker profiles. This result highlights and supports views that there is no one single answer regarding which of the alternatives that is most sustainable. Rather, it depends strongly upon the worldview and values held by the decision maker. A key conclusion is that sustainability assessments should pay more attention to potential differences in underlying values held by key stakeholders in relevant societal contexts. The LCSA methodology still faces challenges regarding results integration but MCDA in combination with stakeholder profiles appears to be a useful approach to build on further.
|
|
| 6. |
- Rämö, Robert, et al.
(författare)
-
Sediment Remediation Using Activated Carbon: Effects of Sorbent Particle Size and Resuspension on Sequestration of Metals and Organic Contaminants.
- 2022
-
Ingår i: Environmental toxicology and chemistry. - : Wiley. - 1552-8618 .- 0730-7268. ; 41:4, s. 1096-1110
-
Tidskriftsartikel (refereegranskat)abstract
- Thin-layer capping using activated carbon (AC) has been described as a cost-effective in situ sediment remediation method for organic contaminants. In this study, we compare the capping efficiency of powdered AC (PAC) against granular AC (GAC) using contaminated sediment from Oskarshamn harbor, Sweden. The effects of resuspension on contaminant retention and cap integrity were also studied. Intact sediment cores were collected from the outer harbor and brought to the laboratory. Three thin-layer caps, consisting of PAC or GAC mixed with clay, or clay only, were added to the sediment surface. Resuspension was created using a motor-driven paddle to simulate propeller wash from ship traffic. Passive samplers were placed in the sediment and in the water column to measure the sediment-to-water release of PAHs, PCBs, and metals. Our results show that a thin-layer cap with PAC reduced sediment-to-water fluxes of PCBs by 57 % under static conditions and 91 % under resuspension. Thin-layer capping with GAC was less effective than PAC, but reduced fluxes of high-molecular weight PAHs. Thin-layer capping with AC was less effective in retaining metals, except for Cd, which release was significantly reduced by PAC. Resuspension generally decreased water concentrations of dissolved cationic metals, perhaps due to sorption to suspended sediment particles. Sediment resuspension in treatments without capping increased fluxes of PCBs with log Kow > 7 and PAHs with log Kow 5 6, but resuspension reduced PCB and PAH fluxes through the PAC thin-layer cap. Overall, PAC performed better than GAC, but adverse effects on the benthic community and transport of PAC to non-target areas are drawbacks that favor the use of GAC. This article is protected by copyright. All rights reserved.© 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.
|
|
| 7. |
- Andersson, Viktor, 1983
(författare)
-
Excess heat utilisation in oil refineries - CCS and algae-based biofuels
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The main objective of this thesis is to investigate two different concepts for CO2 mitigation, from a system perspective, in relation to the oil refining industry: CO2 capture and storage; and algae-based biofuels. For all these processes, process integration with an oil refinery is assumed. The oil refinery sector is a major emitter of CO2 and is responsible for 9% of the industrial emissions of CO2 worldwide. Oil refineries have large amounts of unused excess heat, which can be used to satisfy the heat demands of a CO2 capture plant, a land-based algal cultivation facility, or an algae-based biofuel process. The use of this excess heat significantly reduces the cost for CO2 capture, while an economic evaluation for algae-based biofuels has not been made.Since the amount of heat available from the oil refinery´s processes increase with decreasing temperature in the stripper reboiler, it was investigated how much heat was available at different temperatures. It was also investigated how the decreased temperature would affect the heat demand of CO2 capture processes that use MEA or ammonia as the absorbent. The findings show that it is possible to capture more CO2 using excess heat when the temperature in the stripper reboiler is decreased. For the MEA process, the lower limit of the temperature interval investigated showed the maximum CO2 capture rate, while the ammonia process benefitted from a lower temperature than the standard temperature but showed maximal CO2 capture rate above the lower limit. These results are valid only when using excess heat to satisfy the entire heat demand. At the case study refinery, the available excess heat could satisfy between 28% and 50% of the heat demand of the MEA process when treating the flue gases from all chimneys, depending on the temperature in the stripper reboiler. This utilisation of excess heat represents a way to reduce significantly the costs for CCS in an oil refinery. Land-based cultivation of algae proved to be unsuitable for the utilisation of excess heat. Since the cultivation pond is exposed to wind, rain, and cold, the heat demand fluctuates strongly over the year, making the pond an unstable recipient of the excess heat.Three types of biofuel processes based on microalgae and macroalgae were investigated with respect to integration with the oil refinery. For the algae-based biofuel processes, heat integration and material integration combined to increase the efficiency of the system. When two different build margin technologies (with different CO2 emission factors) are employed for electricity production, macroalgae-based biofuel production appears to be the more robust process from the perspective of CO2 due to the lower electricity demands of the algal cultivation and harvesting phases.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Cossio Grageda, Claudia, 1974, et al.
(författare)
-
Wastewater management in small towns - understanding the failure of small treatment plants in Bolivia
- 2018
-
Ingår i: Environmental Technology (United Kingdom). - : Informa UK Limited. - 1479-487X .- 0959-3330. ; 39:11, s. 1393-1403
-
Tidskriftsartikel (refereegranskat)abstract
- Wastewater management in developing countries is a challenge, especially in small towns with rapid population growth. This study aims at assessing the performance and management of five treatment plants (TPs) in rural areas of Cochabamba, Bolivia. Pollutants’ concentrations, wastewater flows, hydraulic and organic loads and hydraulic retention times were determined in three small treatment plants (2000–10,000 population equivalent [p.e.]; flow > 432 m3/d) and two very small treatment plants (<2000 p.e.; flow < 432 m3/d). The performance assessment was based on operational parameters, treatment efficiency and effluent quality. Management data were collected through semi-structured interviews with managers of local water associations. The results support that the poor performance of the TPs is due to lack of operational expertise and financial resources for adequate operation and maintenance (O&M). Additionally, effective treatment was affected by the type of technology used and whether the plant design included plans for O&M with available resources. This study contributes to a better understanding of actual operating conditions of wastewater TPs in small towns, thus providing needed information regarding technology selection, design, implementation and operation.
|
|
| 11. |
- Boons, Frank, et al.
(författare)
-
Comparing industrial symbiosis in Europe : towards a conceptual framework and research methodology
- 2015
-
Ingår i: International perspectives on industrial ecology. - Cheltenham : Edward Elgar Publishing. - 9781781003565 - 9781781003572 ; , s. 69-88
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Industrial symbiosis (IS) continues to raise the interest of researchers and practitioners alike. Individual and haphazard attempts to increase linkages among co-located firms have been complemented by concerted efforts to stimulate the development of industrial regions with intensified resource exchanges that reduce environmental impact. Additionally, there are examples of both spontaneous and facilitated linkages between two or more firms involving flows of materials/energy waste. A striking feature of IS activities is that they are found across diverse social contexts and vary considerably in form (Lombardi et al., 2012); there are substantial differences in the ways in which IS manifests itself. Equally diverse are the activities of policy makers to stimulate such linkages. Such diversity can already be found within Europe, as became apparent in a first meeting among some of the present authors in 2009 (Isenmann and Chernykh, 2009). Researchers present there decided to create a network of European researchers on IS, with the explicit aim to develop a comparative analysis. We can thus provide insight to the relationship between the style of IS and its context and thereby the potential for policy makers in different contexts to learn from each other. Policy learning can be a tempting route to IS, but is fraught with difficulties if the influence of context is not appreciated (e.g., Wang et al., Chapter 6, this volume).
|
|
| 12. |
- Peters, Greg, et al.
(författare)
-
LCA on fast and slow garment prototypes
- 2018
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- This report summarises the environmental assessment work done in the Mistra Future Fashion program focussed on the potential to improve the environmental performance of garments and adapt them to a circular economy. The approaches examined in this report include reducing the environmental impacts from fast-fashion trends by making garments from paper-based materials, or by extending garment life cycles.This assessment considers two paper-based garments. One is made primarily from paper pulp but enhanced with a polylactic acid polymer. This garment is worn between two to five times before being recycled as newspaper. The other fast garment is made of paper pulp, polylactic acid and nanocellulose. It has a similar life cycle but is composted after use life. These garments are compared with a standard t-shirt. The report also considers a slow-paced scenario in which a polyester garment passes between several owners and is regularly changed to maintain its appeal. It is updated with a transfer sublimation overprint three times, making the garment darker each time. Later it is joined with an outer shell of new material using laser technology to make a cropped, box-cut jacket.The assessment was performed using environmental life cycle assessment. More particularly, the assessment was based on attributional process analysis with cutoff allocation procedures and comparison with a traditional reference garment life cycle. Key environmental effect categories considered here include climate change (greenhouse gas emissions), freshwater eutrophication, freshwater ecotoxicity and human toxicity (cancer and non-cancer).The results indicate that the environmental outcomes of the paper-based garments can be competitive with the reference garment, particularly when the user is assumed to throw away a fully functional reference garment after five uses. This assumption may be true for some users, but the number of uses is considerably lower than the typical or the potential lifespan of the reference garment. The main factor assisting the paper-based garments is the reduction in the impacts per mass associated with material manufacturing (fibres, spinning, knitting), and also their lighter masses. Avoided impacts in the use phase play a secondary role on account of their location in Sweden with its low-carbon energy mix. The long-life garments are also competitive compared with their reference garments. This is primarily a consequence of how extending garment life avoids the production of new garments. The environmental impacts associated with transfer sublimation dye reprinting and laser processing do not significantly impact the overall environmental performance of the extended longlife garments, though confidentiality of data prevents a full assessment of these.The garments in this report are pilot products and explorative scenarios rather than attempts to model existing business or behavioural patterns. The reader should therefore take care to keep the results in context when interpreting them. Nevertheless, the results suggest the value of pursuing the potential associated with these garment life cycles. We should also bear in mind that while the reference garments in this assessment are based on typical usage patterns, other more sustainable patterns are feasible.
|
|
| 13. |
- Sanli, Kemal, et al.
(författare)
-
Metagenomic Sequencing of Marine Periphyton: Taxonomic and Functional Insights into Biofilm Communities
- 2015
-
Ingår i: Frontiers in Microbiology. - : Frontiers Media SA. - 1664-302X. ; 6:1192
-
Tidskriftsartikel (refereegranskat)abstract
- Periphyton communities are complex phototrophic, multispecies biofilms that develop on surfaces in aquatic environments. These communities harbor a large diversity of organisms comprising viruses, bacteria, algae, fungi, protozoans and metazoans. However, thus far the total biodiversity of periphyton has not been described. In this study, we use metagenomics to characterize periphyton communities from the marine environment of the Swedish west coast. Although we found approximately ten times more eukaryotic rRNA marker gene sequences compared to prokaryotic, the whole metagenome-based similarity searches showed that bacteria constitute the most abundant phyla in these biofilms. We show that marine periphyton encompass a range of heterotrophic and phototrophic organisms. Heterotrophic bacteria, including the majority of proteobacterial clades and Bacteroidetes, and eukaryotic macro-invertebrates were found to dominate periphyton. The phototrophic groups comprise Cyanobacteria and the alpha-proteobacterial genus Roseobacter, followed by different micro- and macro-algae. We also assess the metabolic pathways that predispose these communities to an attached lifestyle. Functional indicators of the biofilm form of life in periphyton involve genes coding for enzymes that catalyze the production and degradation of extracellular polymeric substances, mainly in the form of complex sugars such as starch and glycogen-like meshes together with chitin. Genes for 278 different transporter proteins were detected in the metagenome, constituting the most abundant protein complexes. Finally, genes encoding enzymes that participate in anaerobic pathways, such as denitrification and methanogenesis, were detected suggesting the presence of anaerobic or low-oxygen micro-zones within the biofilms.
|
|
| 14. |
- Sandhi, Arifin, 1986-, et al.
(författare)
-
Phytofiltration of arsenic by aquatic moss (Warnstorfia fluitans)
- 2017
-
Ingår i: Environmental Pollution. - : Elsevier BV. - 0269-7491 .- 1873-6424.
-
Tidskriftsartikel (refereegranskat)abstract
- This work investigates whether aquatic moss (Warnstorfia fluitans) originating from an arsenic (As)-contaminated wetland close to a mine tailings impoundment may be used for phytofiltration of As. The aim was to elucidate the capacity of W. fluitans to remove As from arsenite and arsenate contaminated water, how nutrients affect the As uptake and the proportion of As adsorption and absorption by the moss plant, which consists of dead and living parts.Arsenic removal from 0, 1, or 10% Hoagland nutrient solution containing 0–100 μM arsenate was followed over 192 h, and the total As in aquatic moss after treatment was analysed. The uptake and speciation of As in moss cultivated in water containing 10 μM arsenate or arsenite were examined as As uptake in living (absorption + adsorption) and dead (adsorption) plant parts.Results indicated that W. fluitans removed up to 82% of As from the water within one hour when 1 μM arsenate was added in the absence of nutrients. The removal time increased with greater nutrient and As concentrations. Up to 100 μM As had no toxic effect on the plant biomass. Both arsenite and arsenate were removed from the solution to similar extents and, independent of the As species added, more arsenate than arsenite was found in the plant. Of the As taken up, over 90% was firmly bound to the tissue, a possible mechanism for resisting high As concentrations. Arsenic was both absorbed and adsorbed by the moss, and twice as much As was found in living parts as in dead moss tissue. This study revealed that W. fluitans has potential to serve as a phytofilter for removing As from As-contaminated water without displaying any toxic effects of the metalloid.
|
|
| 15. |
- Cowie, A. L., et al.
(författare)
-
Applying a science-based systems perspective to dispel misconceptions about climate effects of forest bioenergy
- 2021
-
Ingår i: Global Change Biology Bioenergy. - : John Wiley and Sons Inc. - 1757-1693 .- 1757-1707. ; 13:8, s. 1210-1231
-
Tidskriftsartikel (refereegranskat)abstract
- The scientific literature contains contrasting findings about the climate effects of forest bioenergy, partly due to the wide diversity of bioenergy systems and associated contexts, but also due to differences in assessment methods. The climate effects of bioenergy must be accurately assessed to inform policy-making, but the complexity of bioenergy systems and associated land, industry and energy systems raises challenges for assessment. We examine misconceptions about climate effects of forest bioenergy and discuss important considerations in assessing these effects and devising measures to incentivize sustainable bioenergy as a component of climate policy. The temporal and spatial system boundary and the reference (counterfactual) scenarios are key methodology choices that strongly influence results. Focussing on carbon balances of individual forest stands and comparing emissions at the point of combustion neglect system-level interactions that influence the climate effects of forest bioenergy. We highlight the need for a systems approach, in assessing options and developing policy for forest bioenergy that: (1) considers the whole life cycle of bioenergy systems, including effects of the associated forest management and harvesting on landscape carbon balances; (2) identifies how forest bioenergy can best be deployed to support energy system transformation required to achieve climate goals; and (3) incentivizes those forest bioenergy systems that augment the mitigation value of the forest sector as a whole. Emphasis on short-term emissions reduction targets can lead to decisions that make medium- to long-term climate goals more difficult to achieve. The most important climate change mitigation measure is the transformation of energy, industry and transport systems so that fossil carbon remains underground. Narrow perspectives obscure the significant role that bioenergy can play by displacing fossil fuels now, and supporting energy system transition. Greater transparency and consistency is needed in greenhouse gas reporting and accounting related to bioenergy.
|
|
| 16. |
- Dymitrow, Mirek, et al.
(författare)
-
Crossing dichotomies and breaking mental patterns: Green business development when all else fails?
- 2017
-
Ingår i: 8th International Scientific Conference “Rural Development 2017: Bioeconomy Challenges”, 23–24 November, 2017 Kaunas, Lithuania.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Obtaining sustainable and inclusive societal organization is not merely a simple matter of ‘doing it’ by subscribing to some winning formula. Given that conceptual frameworks always guide our thoughts, judgments and actions (Latour, 2013; Harvey, 1996; Dennett, 1993), the ways in which we relate to concepts chosen to serve as guiding forces for future development will eventually determine its outcome. As scholarly evidence continuously suggests the concepts ‘rural’ and ‘urban’ are increasingly recognized as artificial barriers for conducting sound and integrated development endeavors in a globalized reality of interconnectedness. In line with the Sustainable Development Goals, which aim to eradicate poverty, shield the planet and safeguard prosperity for all, commitment to universal access to healthy food year round has become an important agenda point. This, however, has been exacerbated by binary thinking and separate ways of doing policy. This paper aims to share experiences from a unique project launched in the northern parts of Gothenburg, Sweden’s second largest city. While the area offers ample resources and immense opportunities for areal economies, it at the same time remains one of Gothenburg’s most segregated, with high levels of unemployment, ill health and crime. The uniqueness of the project lies not only in its way of abridging the rural-urban divide, but also by consciously deferring from the debilitating rhetoric of previous ‘immigrant policies’, and instead focusing on agricultural productivity, small-scale food producers and sustainable food strategies. Such exhortations to bridge between philosophical and material polarities, however, have not come without conceptual and practical challenges, something this paper aims to subsume and open up to debate.
|
|
| 17. |
|
|
| 18. |
|
|
| 19. |
- Åkesson, Sofia, et al.
(författare)
-
Characterizing natural degradation of tetrachloroethene (PCE) using a multidisciplinary approach
- 2020
-
Ingår i: Ambio: a Journal of the Human Environment. - : Springer Science and Business Media LLC. - 0044-7447 .- 1654-7209. ; 50, s. 1074-1088
-
Tidskriftsartikel (refereegranskat)abstract
- A site in mid-western Sweden contaminated with chlorinated solvents originating from a previous dry cleaning facility, was investigated using conventional groundwater analysis combined with compound-specific isotope data of carbon, microbial DNA analysis, and geoelectrical tomography techniques. We show the value of this multidisciplinary approach, as the different results supported each interpretation, and show where natural degradation occurs at the site. The zone where natural degradation occurred was identified in the transition between two geological units, where the change in hydraulic conductivity may have facilitated biofilm formation and microbial activity. This observation was confirmed by all methods and the examination of the impact of geological conditions on the biotransformation process was facilitated by the unique combination of the applied methods. There is thus significant benefit from deploying an extended array of methods for these investigations, with the potential to reduce costs involved in remediation of contaminated sediment and groundwater.
|
|
| 20. |
- Saheb Alam, Soroush, 1986
(författare)
-
A long journey from bioanode to biocathode
- 2018
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Better utilization of renewable sources of energy and recovery of resources from waste streams are important challenges for researchers. Bioelectrochemical systems (BESs) are new technologies which e.g. could be used to produce green energy from waste sources or store renewable electricity as chemical fuels. They rely on microorganisms which can catalyse oxidation/reduction reactions on anodes/cathodes. BESs have a wide range of potential applications such as sensing, bioremediation, recovery of nutrients and metals, valorisation of wastewater organics, and production of energy carriers and other chemicals. However, further research is needed before these applications can be realized. The goal of this thesis was to understand the effect of three different dynamic conditions and disturbances that bioanodes and biocathodes may encounter namely storage, starvation, and potential change. Storage and starvation are disturbances that can affect biological electrodes in all kinds of systems, and it is important to understand their consequences for performance. Changing electrode potential has been shown as a promising method for start-up of biocathodes from enriched bioanodes, but little is known about the long-term performance and changes in microbial community composition as the biocathode develops. First, the possibility for storage of acetate-oxidizing bioanodes using refrigeration, glycerol freezing, and acetone dehydration was investigated. It was shown that storage of acetate-oxidizing bioanodes was possible. Bioanodes stored using refrigeration were the only electrodes that showed biological activity right after five weeks of storage. Then, starvation of acetate-and glucose-fed bioanodes was investigated. It was shown that the acetate- and glucose-fed bioanodes can survive 10 days starvation. However, the overall performance of the glucose-fed bioanodes deteriorated more after each starvation phase compared to the acetate-fed bioanodes. The conversion of acetate- and glucose-fed bioanodes to biocathodes was also compared. Immediately after the potential change, the glucose-fed bioanodes showed better cathodic activity but over time the performance converged. Then, we compared the conversion of bioanodes to biocathodes with direct start-up of biocathodes from a wastewater inoculum. Bare electrodes started-up faster compared to pre-enriched bioanodes. In the end, both types of enrichment procedures led to very similar biocathode communities, which were completely different from the bioanode communities. Indeed, for the microbial communities, it was a long journey from bioanode to biocathodes. Hydrogen appeared to be an important intermediate in the biocathode biofilms, therefore, start-up of biocathodes with pre-enriched hydrogenotrophic cultures was investigated. Hydrogenotrophic microorganisms could facilitate start-up of the biocathodes. All the microbial electrolysis cells inoculated by the enrichment cultures started to generate noticeable current directly after inoculation. In summary, the bioelectrodes in our experiments were robust and could handle storage and starvation periods although the results depended on the experimental conditions, the feed, and the microbial communities. Conversion of bioanodes into biocathodes was less successful and resulted in a complete transition of the microbial community on the electrode. Start-up of biocathodes with hydrogen-oxidizing enrichment cultures was a more successful strategy.
|
|
| 21. |
- Beheshtinia, Mohammad Ali, et al.
(författare)
-
Prioritizing healthcare waste disposal methods considering environmental health using an enhanced multi-criteria decision-making method
- 2023
-
Ingår i: Environmental Pollutants and Bioavailability. - : Taylor & Francis Group. - 2639-5932 .- 2639-5940. ; 35:1, s. 250-269
-
Tidskriftsartikel (refereegranskat)abstract
- The Healthcare Waste Disposal Method Selection (HCWDMS) is a complicated problem due to multiple and often contradictory criteria with different importance degrees. Thus, decision-makers are restored to multi-criteria decision-making (MCDM) methods to prioritize and select the best HCW disposal methods. This study introduces an enhanced MCDM method to deal with the HCWDMS problem. To address the problem, a comprehensive list of criteria and HCW disposal methods are identified. All the criteria are categorized into four main criteria, and Fuzzy Analysis Hierarchy Process is used to determine the weights of considered criteria and sub-criteria. The study results show that environmental, economic, technical, and social criteria are the most important in selecting disposal methods, respectively. Moreover, the sub-criteria of ‘Health Risk’, ‘Release with health effects’, and ‘Capital cost’ have the highest importance, respectively. Additionally, the methods of ‘Microwave’, ‘Sterilization by autoclave’, and ‘Reverse polymerization’ have the highest priority, respectively.
|
|
| 22. |
- Kharazmi, Parastou, 1977-
(författare)
-
Evaluation of Innovative Rehabilitation Technologies Utilising Polymer Composites for Aging Sewer Systems
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Water and wastewater sewer system maintenance is among the costliest aspects of infrastructure investment. The replacement of deteriorated lines is a difficult and expensive process that causes community disturbance and is generally not conducted fast enough to meet demand. To keep up with the rate of deterioration, the use of alternative rehabilitation technologies using polymer linings has increased significantly in recent years, both within Sweden and worldwide. Compared to the traditional pipe replacement method, these technologies are cost-effective, create less community disturbance, and offer a quick return to the service for the line. The main function of polymeric lining is to stabilise the condition of the pipeline, eliminate deterioration, and thereby extend the pipeline’s service life. Although rehabilitation technologies employing polymeric systems have been in use for over 30 years, there have been few technical assessments of either these technologies or the materials involved. Data gathered through the evaluation of these innovative technologies can make their benefits and limitations more widely understood, and can also be used to increase the effectiveness of the rehabilitation process in future.The main objective of this work was to contribute to an improved understanding of the most commonly used materials and methods employed in rehabilitation of wastewater and other applicable sewer lines in residential buildings in Sweden. The primary objective was not to prove that the emerging rehabilitation technologies work, but rather to increase knowledge of their weaknesses and strengths, identify any issues, and provide a technical assessment to support realistic expectations of pipeline rehabilitation. Gathering technical information in this way will help with the planning of future investigations; moreover, collecting extensive data will help to increase the effectiveness of the renewal works, aid progress in the field, and improve predictions regarding longevity and service life. As pipeline rehabilitation is still considered novel, and owing to the general lack of available data on the subject, a multi-approach study was carried out: this included evaluation of the polymeric materials’ performance in the presence of deteriorative factors, assessing the in-service state of the materials and lined sewers previously installed, monitoring the level of quality control implemented during previous rehabilitation works, and evaluating the environmental impacts of using pipe-lining technologies compared to pipe replacement. The techniques discussed included rehabilitation with epoxy and polyester resin-based lining materials, applied with brush-on and spray-on techniques, and cured-in-place pipe lining (installed by sending a resin-impregnated flexible tube inside the host pipe). Degradation of the resin-based lining materials was investigated via artificial aging involving immersion in water at elevated temperatures. The changes in materials that occurred during accelerated laboratory aging were tracked by means of various tests, including thermal and mechanical analyses, water absorption measurements and microscopy. The analysis focused on reinforced polyester-based and toughened epoxy-based lining materials in order to gain a better understanding of their performance as pipe lining. Moreover, the previously installed lined pipes and lining materials were also studied during laboratory examinations to evaluate the in-service performance of the materials and techniques under operating conditions over time, as well as to identify common defects. The state of the materials and the lined pipe were studied by means of different investigative methods, including visual inspection, microscopy, Fourier transform infrared spectroscopy, thickness measurement, thermal and mechanical analyses. This PhD work also includes an investigation to determine the level of quality control carried during some previous rehabilitation works. Data on the quality evaluation of previous rehabilitation works were gathered during visits to the work sites, as well as by analysing lined pipes that had already been installed. Finally, a comparative life-cycle assessment was undertaken to compare the environmental impacts of pipe replacement with those of alternative innovative rehabilitations, such as CIPP and coatings with polyester and epoxy polymeric systems. Data obtained from an LCA tool were used to facilitate comparison from an environmental perspective.Results from artificial aging in the lab indicated that the properties of polymeric lining materials changed significantly when high temperatures were combined with water exposure. However, the aging testing conducted for this study also found that the materials performed relatively well at temperatures close to the average temperatures inside sewerage systems. The results revealed that the polyester-based lining material was less sensitive when compared with epoxy-based lining materials during stimulated aging. Moreover, results from the in-service field demonstration (involving examination of 12 samples with up to 10 years of service, including reinforced polyester and modified epoxy linings or cured-in-place pipe (CIPP) lining) showed minimal evidence that the materials underwent significant deterioration after installation; instead, a majority of the common defects were found to be related to poor-quality installation practices. Because very few field samples were available to study, conclusions regarding overall performance could not be drawn. However, there is no evidence that these materials will not perform as expected during their service life when properly installed.Evaluating quality control of previous rehabilitation work revealed a gap between theory and practice where the level of quality control and documentation was concerned; furthermore, it also emerged that quality control and documentation is crucial to both the prevention of common issues and the overall effectiveness of the rehabilitation. Accordingly, a series of recommendations regarding the development of comprehensive quality control and quality assurance procedures (QC/QA) are provided in this work. These recommendations highlight the aspects that are most important to consider at each of several key stages (before installation, during installation, and after rehabilitation work is completed).Results from comparative life-cycle assessment (LCA) showed that alternative technologies, including cured-in-place (flexible sleeve) and coating techniques, have some advantages over pipe replacement from an environmental perspective. However, the choice to use one rehabilitation technology over another is a multi-stage decision-making process that should not be based solely on a single factor.This PhD work promotes an improved understanding of the limitations and benefits of polymeric lining through the testing performed and analyses conducted. This work highlights the need for improved quality control, and further suggests that developing a detailed and comprehensive quality control plan for each technology would provide higher and more consistent quality overall. The study also demonstrates that the long-term strength of any rehabilitation work depends on various factors, and that selecting one method over another must be a process based on extensive knowledge and understanding of each rehabilitation technology. No evidence was found to indicate that the materials could not perform well under working conditions if selected and installed appropriately. However, a larger number of field samples with longer in-service time and a more detailed technical history, along with a more extended experimental plan for laboratory investigations based on the results of this PhD work, will allow for the gathering of the data required to answer questions regarding life expectancy with a higher degree of certainty.
|
|
| 23. |
- Waara, Sylvia, et al.
(författare)
-
Performance of a constructed wetland system for treatment of landfill leachate.
- 2008
-
Ingår i: Waste 2008. Waste and Resource management-A shared responsibility. - Stanton-on-the-Wolds : Waste Conference Ltd.. ; , s. 655-667, s. 655-667
-
Konferensbidrag (refereegranskat)abstract
- The performance of a constructed wetland for treatment of landfill leachate has been evaluated based upon data obtained during 4 years (2003-2006). It consists of a series of 10 ponds with a total capacity of 52.000 m3 covering 8 ha. Using univariate and multivariate statistics (PCA) the reduction pattern of a large number of chemical parameters including heavy metals has been investigated in 3 parts of the wetland with equal volume. Analyses show that many parameters are removed to the greatest extent in the first part of the system (e.g. many heavy metals, total suspended solids) or the second part of the system (N-NH4) while other parameters such as total nitrogen are more gradually reduced (10 ton/year removed). Toxicity testing with 5 bioassays showed that toxicity was sometimes observed at the inlet but no toxicity was observed at the outlet for 4 of the test species. The data presented will be used for optimizing the treatment process as well as to improve the monitoring program.
|
|
| 24. |
- Davidsson, Åsa, et al.
(författare)
-
Effect of anaerobic digestion at 35, 55 and 60 °C on pharmaceuticals and organic contaminants
- 2014
-
Ingår i: Water Science and Technology. - : IWA Publishing. - 0273-1223 .- 1996-9732. ; 69:6, s. 1282-1288
-
Tidskriftsartikel (refereegranskat)abstract
- The application of treated sewage sludge on farmland is a suggested method for recycling nutrients and reducing demand for commercial fertilizer. However, sludge needs to be safe from possible contaminants which can cause acute and long-term health and environmental problems. Residual pharmaceuticals and organic contaminants are mentioned as emerging threats since wastewater treatment plants are not designed to degrade these substances. The aim of this study was to screen and evaluate the presence, and reduction, of pharmaceuticals and polycyclic aromatic hydrocarbons (PAHs) during anaerobic digestion of mixed primary and waste-activated sludge at 35, 55 and 60°C and during pasteurization at 70°C. The study showed the difficulty of analysing pharmaceutical compounds in low concentrations in the sludge matrix. No general reduction of these compounds was seen during treatment, but for individual substances some reduction occured. The PAHs were generally not reduced during digestion or pasteurization, but for three substances (indeno[1,2,3-cd]pyrene and dibenzo[a,h]anthracene (analysed together) and benzo[g,h,i]perylene) reduction (up to 60%) during digestion was seen. Digestion at 35 and 55°C resulted in about the same order of reduction of the three individual PAHs, which was higher than for digestion at 60°C.
|
|
| 25. |
- Punzi, Marisa, et al.
(författare)
-
Combined anaerobic-ozonation process for treatment of textile wastewater : Removal of acute toxicity and mutagenicity
- 2015
-
Ingår i: Journal of Hazardous Materials. - : Elsevier BV. - 0304-3894 .- 1873-3336. ; 292, s. 52-60
-
Tidskriftsartikel (refereegranskat)abstract
- A novel set up composed of an anaerobic biofilm reactor followed by ozonation was used for treatment of artificial and real textile effluents containing azo dyes. The biological treatment efficiently removed chemical oxygen demand and color. Ozonation further reduced the organic content of the effluents and was very important for the degradation of aromatic compounds, as shown by the reduction of UV absorbance. The acute toxicity toward Vibrio fischeri and the shrimp Artemia salina increased after the biological treatment. No toxicity was detected after ozonation with the exception of the synthetic effluent containing the highest concentration, 1. g/l, of the azo dye Remazol Red. Both untreated and biologically treated textile effluents were found to have mutagenic effects. The mutagenicity increased even further after 1. min of ozonation. No mutagenicity was however detected in the effluents subjected to longer exposure to ozone. The results of this study suggest that the use of ozonation as short post-treatment after a biological process can be beneficial for the degradation of recalcitrant compounds and the removal of toxicity of textile wastewater. However, monitoring of toxicity and especially mutagenicity is crucial and should always be used to assess the success of a treatment strategy. © 2015 Elsevier B.V.
|
|
