| 1. |
- Eivazihollagh, Alireza, et al.
(författare)
-
On chelating surfactants : Molecular perspectives and application prospects
- 2019
-
Ingår i: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322 .- 1873-3166. ; 278, s. 688-705
-
Tidskriftsartikel (refereegranskat)abstract
- Chelating agents, molecules that very strongly coordinates certain metal ions, are used industrially as well as in consumer products to minimize disturbances and increase performance of reactions and applications. The widely used sequestering agents, nitrilotriacetic acid (NTA), ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA) belong to this branch of readily water-soluble compounds. When these chemical structures also have hydrophobic parts, they are prone to adsorb at air-water interfaces and to self-assemble. Such bifunctional molecules can be called chelating surfactants and will have more extended utilization prospects than common chelating agents or ordinary ionic surfactants. The present review attempts to highlight the fundamental behavior of chelating surfactants in solution and at interfaces, and their very specific interactions with metal ions. Methods to recover chelating surfactants from metal chelates are also described. Moreover, utilization of chelating surfactants in applications for metal removal in environmental engineering and mineral processing, as well as for metal control in the fields of biology, chemistry and physics, is exemplified and discussed.
|
|
| 2. |
- Ruggieri, Federica, 1990-
(författare)
-
Transaminase Biocatalysis: Applications and Fundamental Studies
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Biocatalysis is the branch of science at the intersection between chemistry and biology and specifcally dedicated to the application of natural evolvable catalysts, i.e. enzymes, in human-designed chemical processes. Among the array of promising biocatalysts, transaminases (EC 2.6.1.x) are possibly one of the enzyme classes with the largest unrealized potential. Fast inactivation, poor acceptance towards unnatural substrates and limited tolerance to cosolvents are some of the main factors hampering their implementation in chemical synthesis. In the present thesis work advances in both transaminase application and molecular understanding are presented. Indeed, these two topics are deeply interconnected, as a better molecular understanding is expected to ease the generation of novel enzyme variants suitable for new desired applications.From the application perspective, the design of an effective one-pot transaminase-based racemization system offers new possibilities for the design of fully biocatalytic dynamic kinetic resolutions of valuable chiral amines. Similarly, the successful structure-guided redesign of the small substrate binding pocket of the Chromobacterium violaceum (S)-selective transaminase (Cv-TA) granted access to a new enzyme variant active on semi-preparative scale towards the unnatural substrate 1,2-diphenylethylamine.From the molecular understanding perspective, the combination of crystallographic and computational techniques led to the formulation of a dimer dissociation model valid for Cv-TA and possibly for other enzymes belonging to the same fold type. This model, which aided the improvement of the Cv-TA stability by structure-based engineering, will hopefully enable similar results in other structurally related enzymes.
|
|
| 3. |
- Hendil-Forssell, Peter, 1983-
(författare)
-
Rational engineering of esterases for improved amidase specificity in amide synthesis and hydrolysis
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Biocatalysis is an ever evolving field that uses enzymes or microorganisms for chemical synthesis. By utilizing enzymes that generally have evolved for specific reactions under mild conditions and temperatures, biocatalysis can be a more environmentally friendly option compared to traditional chemistry.Amide-type chemistries are important and bond formation avoiding poor atom economy is of high priority in organic chemistry. Biocatalysis could potentially be a solution but restricted substrate scope is a limitation. Esterases/lipases usually display broad substrate scope and catalytic promiscuity but are poor at hydrolyzing amides compared to amidases/proteases. The difference between the two enzyme classes is hypothesized to reside in one key hydrogen bond present in amidases, which facilitates the transition state for nitrogen inversion during catalysis.In this thesis the work has been focused on introducing a stabilizing hydrogen bond acceptor in esterases, mimicking that found in amidases, to develop better enzymatic catalysts for amide-based chemistries.By two strategies, side-chain or water interaction, variants were created in three esterases that displayed up to 210-times increased relative amidase specificity compared to the wild type. The best variant displayed reduced activation enthalpy corresponding to a weak hydrogen bond. The results show an estimated lower limit on how much the hydrogen bond can be worth to catalysis.MsAcT catalyze kinetically controlled N-acylations in water. An enzymatic one-pot one-step cascade was developed for the formation of amides from aldehydes in water that gave 97% conversion. In addition, engineered variants of MsAcT with increased substrate scope could synthesize an amide in water with 81% conversion, where the wild type gave no conversion. Moreover, variants of MsAcT displayed up to 32-fold change in specificity towards amide synthesis and a switch in reaction preference favoring amide over ester synthesis.
|
|
| 4. |
- Semlitsch, Stefan
(författare)
-
Building blocks for polymer synthesis by enzymatic catalysis
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The search for alternatives to oil-based monomers has sparked interest for scientists to focus on the use of renewable resources for energy production, for the synthesis of polymeric materials and in other areas. With the use of renewable resources, scientists face new challenges to first isolate interesting molecules and then to process them.Enzymes are nature’s own powerful catalysts and display a variety of activities. They regulate important functions in life. They can also be used for chemical synthesis due to their efficiency, selectivity and mild reaction conditions. The selectivity of the enzyme allows specific reactions enabling the design of building blocks for polymers.In the work presented here, a lipase (Candida antarctica lipase B (CalB)) was used to produce building blocks for polymers. An efficient route was developed to selectively process epoxy-functional fatty acids into resins with a variety of functional groups (maleimide, oxetane, thiol, methacrylate). These oligoester structures, based on epoxy fatty acids from birch bark and vegetable oils, could be selectively cured to form thermosets with tailored properties.The specificity of an esterase with acyl transfer activity from Mycobacterium smegmatis (MsAcT) was altered by rational design. The produced variants increased the substrate scope and were then used to synthesize amides in water, where the wild type showed no conversion. A synthetic procedure was developed to form mixed dicarboxylic esters by selectively reacting only one side of divinyl adipate in order to introduce additional functional groups.
|
|
| 5. |
- Hong, Kuk-ki, 1976, et al.
(författare)
-
Metabolic Engineering of Saccharomyces cerevisiae: A Key Cell Factory Platform for Future Biorefineries
- 2012
-
Ingår i: Cellular and Molecular Life Sciences. - : Springer Science and Business Media LLC. - 1420-9071 .- 1420-682X. ; 69:16, s. 2671-2690
-
Forskningsöversikt (refereegranskat)abstract
- Metabolic engineering is the enabling science of development of efficient cell factories for the production of fuels, chemicals, pharmaceuticals, and food ingredients through microbial fermentations. The yeast Saccharomyces cerevisiae is a key cell factory already used for the production of a wide range of industrial products, and here we review ongoing work, particularly in industry, on using this organism for the production of butanol, which can be used as biofuel, and isoprenoids, which can find a wide range of applications including as pharmaceuticals and as biodiesel. We also look into how engineering of yeast can lead to improved uptake of sugars that are present in biomass hydrolyzates, and hereby allow for utilization of biomass as feedstock in the production of fuels and chemicals employing S. cerevisiae. Finally, we discuss the perspectives of how technologies from systems biology and synthetic biology can be used to advance metabolic engineering of yeast.
|
|
| 6. |
- Skoog, Emma, 1983, et al.
(författare)
-
Biobased adipic acid – The challenge of developing the production host
- 2018
-
Ingår i: Biotechnology Advances. - : Elsevier BV. - 0734-9750. ; 36:8, s. 2248-2263
-
Forskningsöversikt (refereegranskat)abstract
- Adipic acid is a platform chemical, and is the most important commercial dicarboxylic acid. It has been targeted for biochemical conversion as an alternative to present chemical production routes. From the perspective of bioeconomy, several kinds of raw material are of interest including the sugar platform (derived from starch, cellulose or hemicellulose), the lignin platform (aromatics) and the fatty acid platform (lipid derived). Two main biochemical-based production schemes may be employed: (i) direct fermentation to adipic acid, or (ii) fermentation to muconic or glucaric acid, followed by chemical hydrogenation (indirect fermentation). This review presents a comprehensive description of the metabolic pathways that could be constructed and analyzes their respective theoretical yields and metabolic constraints. The experimental yields and titers obtained so far are low, with the exception of processes based on palm oil and glycerol, which have been reported to yield up to 50 g and 68 g adipic acid/L, respectively. The challenges that remain to be addressed in order to achieve industrially relevant production levels include solving redox constraints, and identifying and/or engineering enzymes for parts of the metabolic pathways that have yet to be metabolically demonstrated. This review provides new insights into ways in which metabolic pathways can be constructed to achieve efficient adipic acid production. The production host provides the chassis to be engineered via an appropriate metabolic pathway, and should also have properties suitable for the industrial production of adipic acid. An acidic process pH is attractive to reduce the cost of downstream processing. The production host should exhibit high tolerance to complex raw material streams and high adipic acid concentrations at acidic pH.
|
|
| 7. |
- Gullfot, Fredrika, 1967-
(författare)
-
Synthesis of xyloglucan oligo- and polysaccharides with glycosynthase technology
- 2009
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Xyloglucans are polysaccharides found as storage polymers in seeds and tubers, and as cross-linking glycans in the cell wall of plants. Their structure is complex with intricate branching patterns, which contribute to the physical properties of the polysaccharide including its binding to and interaction with other glycans such as cellulose. Xyloglucan is widely used in bulk quantities in the food, textile and paper making industries. With an increasing interest in technically more advanced applications of xyloglucan, such as novel biocomposites, there is a need to understand and control the properties and interactions of xyloglucan with other compounds, to decipher the relationship between xyloglucan structure and function, and in particular the effect of different branching patterns. However, due to the structural heterogeneity of the polysaccharide as obtained from natural sources, relevant studies have not been possible to perform in practise. This fact has stimulated an interest in synthetic methods to obtain xyloglucan mimics and analogs with well-defined structure and decoration patterns. Glycosynthases are hydrolytically inactive mutant glycosidases that catalyse the formation of glycosidic linkages between glycosyl fluoride donors and glycoside acceptors. Since its first conception in 1998, the technology is emerging as a useful tool in the synthesis of large, complex polysaccharides. This thesis presents the generation and characterisation of glycosynthases based on xyloglucanase scaffolds for the synthesis of well-defined homogenous xyloglucan oligo- and polysaccharides with regular substitution patterns.
|
|
| 8. |
- Jansson, Ronnie, et al.
(författare)
-
Functionalized silk assembled from a recombinant spider silk fusion protein (Z-4RepCT) produced in the methylotrophic yeast Pichia pastoris
- 2016
-
Ingår i: Biotechnology Journal. - : Wiley-VCH Verlagsgesellschaft. - 1860-6768 .- 1860-7314. ; 11:5, s. 687-699
-
Tidskriftsartikel (refereegranskat)abstract
- Functional biological materials are a growing research area with potential applicability in medicine and biotechnology. Using genetic engineering, the possibility to introduce additional functions into spider silk-based materials has been realized. Recently, a recombinant spider silk fusion protein, Z-4RepCT, was produced intracellularly in Escherichia coli and could after purification self-assemble into silk-like fibers with ability to bind antibodies via the IgG-binding Z domain. In this study, the use of the methylotrophic yeast Pichia pastoris for production of Z-4RepCT has been investigated. Temperature, pH and production time were influencing the amount of soluble Z-4RepCT retrieved from the extracellular fraction. Purification of secreted Z-4RepCT resulted in a mixture of full-length and degraded silk proteins that failed to self-assemble into fibers. A position in the C-terminal domain of 4RepCT was identified as being subjected to proteolytic cleavage by proteases in the Pichia culture supernatant. Moreover, the C-terminal domain was subjected to glycosylation during production in P. pastoris. These observed alterations of the CT domain are suggested to contribute to the failure in fiber assembly. As alternative approach, Z-4RepCT retrieved from the intracellular fraction, which was less degraded, was used and shown to retain ability to assemble into silk-like fibers after enzymatic deglycosylation.
|
|
| 9. |
- Anasontzis, George E, 1980
(författare)
-
Biomass modifying enzymes: From discovery to application
- 2012
-
Ingår i: Oral presentation at the Chalmers Life Science AoA conference.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- It has now been realized that the road towards the bio-based economy is a one-way street, leaving gradually the oil-based technology and driving slowly towards a more sustainable society. The current non-biodegradable hydrocarbon fuels and plastics will be replaced by new products which will derive from natural and renewable resources. The synthesis of such biofuels and biochemicals is still challenged by the difficulties to cost efficiently degrade lignocellulosic material to fermentable sugars or to isolate the intact polymers. Biomass degrading and modifying enzymes play an integral role both in the separation of the polymers from the wood network, as well as in their subsequent modification, prior to further product development.Our group interests focus on all levels of applied enzyme research of biomass acting enzymes: Discovery, assay development, production and application. Relevant examples will be provided: What is our strategy for discovering novel microorganisms and enzymes from the tropical forests and grasslands of Vietnam? How do we design novel real-world assays for enzyme activity determination? Which are the bottlenecks in the enzymatic cellulose hydrolysis? How enzymes can be used to produce high added value compounds from biomass?
|
|
| 10. |
|
|
| 11. |
- Kürten, Charlotte, 1989-
(författare)
-
On Catalytic Mechanisms for Rational Enzyme Design Strategies
- 2018
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Enzymes enable life by promoting chemical reactions that govern the metabolism of all living organisms. As green catalysts, they have been extensively used in industry. However, to reach their full potential, engineering is often required, which can benefit from a detailed understanding of the underlying reaction mechanism.In Paper I, we screened for an esterase with promiscuous amidase activity capitalizing on a key hydrogen bond acceptor that is able to stabilize the rate limiting nitrogen inversion. In silicoanalyses revealed the esterase patatin as promising target that indeed catalyzed amide hydrolysis when tested in vitro. While key transition state stabilizers for amide hydrolysis are known, we were interested in increasing our fundamental understanding of terpene cyclase catalysis (Paper II-V). In Paper II, kinetic studies in D2O-enriched buffers using a soluble diterpene cyclase suggested that hydrogen tunneling is part of the rate-limiting protonation step. In Paper III, we performed intense computational analyses on a bacterial triterpene cyclase to show the influence of water flow on catalysis. Water movement in the active site and in specific water channels, influencing transition state formation, was detected using streamline analysis. In Paper IV and V, we focused on the human membrane-bound triterpene cyclase oxidosqualene cyclase. We first established a bacterial expression and purification protocol in Paper IV, before performing detailed in vitroand in silicoanalyses in Paper V. Our analyses showed an entropy-driven reaction mechanism and the existence of a tunnel network in the structure of the human enzyme. The influence of water network rearrangements on the thermodynamics of the transition state formation were confirmed. Introducing mutations in the tunnel lining residues severely affected the temperature dependence of the reaction by changing the water flow and network rearrangements in the tunnels and concomitant the active site.
|
|
| 12. |
- Bergman, Alexandra Linda, 1985, et al.
(författare)
-
Heterologous phosphoketolase expression redirects flux towards acetate, perturbs sugar phosphate pools and increases respiratory demand in Saccharomyces cerevisiae
- 2019
-
Ingår i: Microbial Cell Factories. - : Springer Science and Business Media LLC. - 1475-2859. ; 18:1
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction: Phosphoketolases (Xfpk) are a non-native group of enzymes in yeast, which can be expressed in combination with other metabolic enzymes to positively influence the yield of acetyl-CoA derived products by reducing carbon losses in the form of CO2. In this study, a yeast strain expressing Xfpk from Bifidobacterium breve, which was previously found to have a growth defect and to increase acetate production, was characterized. Results: Xfpk-expression was found to increase respiration and reduce biomass yield during glucose consumption in batch and chemostat cultivations. By cultivating yeast with or without Xfpk in bioreactors at different pHs, we show that certain aspects of the negative growth effects coupled with Xfpk-expression are likely to be explained by proton decoupling. At low pH, this manifests as a reduction in biomass yield and growth rate in the ethanol phase. Secondly, we show that intracellular sugar phosphate pools are significantly altered in the Xfpk-expressing strain. In particular a decrease of the substrates xylulose-5-phosphate and fructose-6-phosphate was detected (26% and 74% of control levels) together with an increase of the products glyceraldehyde-3-phosphate and erythrose-4-phosphate (208% and 542% of control levels), clearly verifying in vivo Xfpk enzymatic activity. Lastly, RNAseq analysis shows that Xfpk expression increases transcription of genes related to the glyoxylate cycle, the TCA cycle and respiration, while expression of genes related to ethanol and acetate formation is reduced. The physiological and transcriptional changes clearly demonstrate that a heterologous phosphoketolase flux in combination with endogenous hydrolysis of acetyl-phosphate to acetate increases the cellular demand for acetate assimilation and respiratory ATP-generation, leading to carbon losses. Conclusion: Our study shows that expression of Xfpk in yeast diverts a relatively small part of its glycolytic flux towards acetate formation, which has a significant impact on intracellular sugar phosphate levels and on cell energetics. The elevated acetate flux increases the ATP-requirement for ion homeostasis and need for respiratory assimilation, which leads to an increased production of CO2. A majority of the negative growth effects coupled to Xfpk expression could likely be counteracted by preventing acetate accumulation via direct channeling of acetyl-phosphate towards acetyl-CoA.
|
|
| 13. |
- Finnveden, Maja
(författare)
-
Enzyme catalysis towards bio-based UV-curable buildingblocks
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Polymeric materials are found in virtually all areas of daily life; they are found in everything from packages keeping our food safe to the buildings where we spend our days, and the production is a worldwide industry. Although polymeric materials play a big part in sustainable solution’s, a lot can be done to develop more environmental methods for producing them. Both the process conditions and the resources that go in are important to consider. As more people understand that we need to manage our planet’s resources and ecosystem differently the demand for sustainable materials is increasing.Catalysis is a key for designing chemistry for the environment and an interesting alternative is enzyme catalysis. Enzymes are proteins working as catalysts in biochemical reactions. One of the most prominent features of enzymes’ is their selectivity, which means that they have preferences towards forming one product over others. Using enzymes’ as catalysts in synthetic chemical reactions the selectivity can be used to produce a wide range of products without side reaction occurring. Further benefits of using enzyme catalysis include high rate acceleration and working under mild reaction conditions.In the work presented here the selectivity and efficiency of enzymes have been combined with photochemistry in new efficient methods for the synthesis ofpolymeric materials. The enzymes used were the well-known lipase B form Candida antarctica and an esterase/acyltransferase from Mycobacterium smegmatis.The thesis divides into three parts in which three kinds of components were synthesized by enzyme catalysis: (i) unsaturated polyesters; (ii) vinyl ether building-blocks; and (iii) bio-based polyamides. In the first two parts the efficiency and selectivity of enzyme catalysis at low temperatures were utilized to synthesize building-blocks that can be further used for photopolymerization. By using enzyme catalysis structures that can be difficult or even impossible to access with conventional chemistry have been made. In part (iii) photochemistry was used to synthesize a monomer that was polymerized by enzyme catalysis to produce polyamides.All three parts presented in this thesis show the potential of the combination of enzymes and photochemistry to give access to polymeric materials under benign conditions. The work thus advances the capacity to manufacture building-blocks to create new sustainable polymeric materials.
|
|
| 14. |
- Hüttner, Silvia, 1984, et al.
(författare)
-
Synthesis of antioxidants with free and immobilised fungal feruloyl esterases
- 2016
-
Ingår i: European Symposium on Biochemical Engineering Sciences, 11-14 Sep 2016, Dublin, Ireland.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Feruloyl esterases (FAEs, E.C. 3.1.1.73, CAZy family CE1) are enzymes that are secreted by a wide range of fungi and bacteria as part of the enzymes hydrolysing plant biomass. Under conditions of low water content, FAEs can also carry out (trans)esterification reactions. Thus, their potential use as biocatalysts for the production of antioxidants with applications in food, cosmetic and pharmaceutical industries has been investigated in recent years. We characterised the biosynthetic potential of four new FAE enzymes from a thermophilic fungus. We focused on optimizing reaction conditions for the synthesis of ferulate esters with improved hydrophobic or hydrophilic properties; prenyl ferulate and 5-O-(trans-feruloyl)-arabinofuranose, respectively. In addition to using free enzymes, we also immobilised them on the mesoporous silica material SBA-15 with pore sizes ranging from 7 to 10 nm, to improve the esterification-to-hydrolysis ratio of the enzymes. It has been shown previously that immobilisation renders enzymes more resilient to adverse conditions and increases their productive life time [1]. Furthermore, immobilisation may also result in a decrease of unwanted side reactions (hydrolysis of transesterification) [2]. In agreement with that, we achieved a higher product yield with immobilised enzymes compared to free enzymes. The immobilised biocatalysts are also more easily re-usable for several production cycles, thus lowering production costs.
|
|
| 15. |
- Sunner, Hampus, 1981, et al.
(författare)
-
Fungal Ferulic Acid Esterases – Specificity and Phylogeny
- 2009
-
Ingår i: Italic5 Science and Technology of Biomasses Proceedings Book, M Orlandi, C Crestine (Ed.). Italic5/COST conference, Sept 1-4 2009, Varenna, Italy.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Ferulic Acid Esterases (FAE) is a large heterogeneous group of enzymes with activity on esters of hydroxy- and metoxy- substituted cinnamic acid derivatives, such as ferulic acid. These ester bonds occur in the cell walls of plants and are especially common in grasses. As little systematic knowledge has been collected about this group of enzymes and only a few enzymes have been biochemically characterised to date, we have explored the phylogeny of FAEs using bioinformatic tools. We can conclude that the known Ferulic Acid Esterases belong to several evolutionary distant groups, two of which have dozens of highly related sequences, and a few groups with no members other than the known enzyme. The phylogeny also suggests certain similarities of substrate specificity within groups and proposes enzymes, whose biochemical characterisation would be especially informative for our understanding of the FAE families.
|
|
| 16. |
- Hüttner, Silvia, 1984, et al.
(författare)
-
Fungal Glucuronoyl and Feruloyl Esterases for Wood Processing and Phenolic Acid Ester/Sugar Ester Synthesis
- 2015
-
Ingår i: Biotrans 2015, Vienna, Austria, 26-30 July 2015.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Feruloyl esterases (FAEs, E.C. 3.1.1.73, CAZy family CE1) and glucuronoyl esterases(GEs, E.C. 3.1.1.-, CAZy family CE15) are involved in the degradation of plantbiomass by hydrolysing ester linkages in plant cell walls, and thus have potential use inbiofuel production from lignocellulosic materials and in biorefinery applications withthe aim of developing new wood-based compounds [1, 2]. GEs and FAEs are present inthe genomes of a wide range of fungi and bacteria.Under conditions of low water content, these enzymes can also carry out(trans)esterification reactions, making them promising biocatalysts for the modificationof compounds with applications in the food, cosmetic and pharmaceutical industry.Compared to the chemical process, enzymatic synthesis can be carried out under lowerprocess temperatures (50-60°C) and results in fewer side products, thus reducing theenvironmental impact.We characterised new FAE and GE enzymes from mesophilic, thermophilic and coldtolerantfilamentous fungi produced in Pichia pastoris. The enzymes were characterisedfor both their hydrolytic abilities on various model substrates (methyl ferulate, pNPferulate)- for potential applications in deconstruction of lignocellulosic materials andextraction of valuable compounds - as well as for their biosynthetic capacities. Wetested and optimised the FAEs’ transesterification capabilities on ferulate esters in a 1-butanol-buffer system, with the aim of using the most promising candidates for theproduction of antioxidant compounds with improved hydrophobic or hydrophilicproperties, such as prenyl ferulate, prenyl caffeate, glyceryl ferulate and 5-O-(transferuloyl)-arabinofuranose.
|
|
| 17. |
- Merz, Luisa M., et al.
(författare)
-
The Role of Buffer, Pyridoxal 5'-phosphate and Light on the Stability of the Silicibacter Pomeroyi Transaminase
- 2022
-
Ingår i: ChemCatChem. - : Wiley. - 1867-3880 .- 1867-3899. ; n/a:n/a
-
Tidskriftsartikel (refereegranskat)abstract
- Transaminases are pyridoxal 5’-phosphate (PLP)-dependent enzymes that transfer amino-functions. The transaminase from Silicibacter pomeroyi (SpATA) exhibits a broad substrate spectrum. In this work we examined the effect of different conditions (light, buffer and PLP-concentration) on the stability of SpATA, as well as the causes for these effects. The enzyme was stored either in TRIS or CHES with 0–10 mM added PLP at 22 °C. The samples were either kept dark or they were exposed to light. The results show that invariably, all samples kept in darkness exhibited longer half-life times than the ones exposed to light. An increase in the half-life from 8 h to 720 h could be achieved solely by keeping the sample dark. Especially samples in CHES buffer inactivated faster in light the more PLP was present, due to the degradation of PLP. In TRIS however, an imine-bond between TRIS and PLP protects PLP from degradation.
|
|
| 18. |
- Winter, S. D., et al.
(författare)
-
Chemical Mapping Exposes the Importance of Active Site Interactions in Governing the Temperature Dependence of Enzyme Turnover
- 2021
-
Ingår i: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 11:24, s. 14854-14863
-
Tidskriftsartikel (refereegranskat)abstract
- Uncovering the role of global protein dynamics in enzyme turnover is needed to fully understand enzyme catalysis. Recently, we have demonstrated that the heat capacity of catalysis, ΔCP‡, can reveal links between the protein free energy landscape, global protein dynamics, and enzyme turnover, suggesting that subtle changes in molecular interactions at the active site can affect long-range protein dynamics and link to enzyme temperature activity. Here, we use a model promiscuous enzyme (glucose dehydrogenase from Sulfolobus solfataricus) to chemically map how individual substrate interactions affect the temperature dependence of enzyme activity and the network of motions throughout the protein. Utilizing a combination of kinetics, red edge excitation shift (REES) spectroscopy, and computational simulation, we explore the complex relationship between enzyme–substrate interactions and the global dynamics of the protein. We find that changes in ΔCP‡ and protein dynamics can be mapped to specific substrate–enzyme interactions. Our study reveals how subtle changes in substrate binding affect global changes in motion and flexibility extending throughout the protein. © 2021 The Authors. Published by American Chemical Society
|
|
| 19. |
|
|
| 20. |
- Zhang, Zhibo, et al.
(författare)
-
Novel artificial ionic cofactors for efficient electro-enzymatic conversion of CO2 to formic acid
- 2022
-
Ingår i: Journal of CO2 Utilization. - : Elsevier. - 2212-9820 .- 2212-9839. ; 60
-
Tidskriftsartikel (refereegranskat)abstract
- The low yield of enzymatic conversion of CO2 to formic acid as well as the high cost and instability of using the natural cofactor (NADH) hamper the large-scale application of the CO2 enzymatic utilization. To address these issues and to improve the production of formic acid, six bipyridinium-based artificial cofactors were developed for the enzymatic conversion of CO2 and further integrated with the electrocatalytic regeneration of the cofactors for the formic acid production. All of them did show a higher catalytic performance compared to NADH. Particularly, 1,1′-bis(2-(dimethylamino)ethyl)-4,4′-bipyridinium bromine did exhibit the highest catalytic performance with a high formic acid concentration of 4.76 mM in 60 min, which is 47 times higher than that of the natural cofactor NADH and is also currently the highest performance among the reported artificial cofactors in literature. Thermodynamic analysis, electrochemical investigations, and molecular dynamics simulations were performed to clarify the structure-energy relationship of the functional bipyridinium-based salts and to rationalize how it is affected by the different functional groups. This study gives a deep insight into the role of artificial cofactors in enzymatic reactions and can clearly promote the development of novel bioelectrochemical conversion of CO2.
|
|
| 21. |
- Cámara, Elena, 1985, et al.
(författare)
-
Data mining of Saccharomyces cerevisiae mutants engineered for increased tolerance towards inhibitors in lignocellulosic hydrolysates
- 2022
-
Ingår i: Biotechnology Advances. - : Elsevier BV. - 0734-9750. ; 57
-
Forskningsöversikt (refereegranskat)abstract
- The use of renewable plant biomass, lignocellulose, to produce biofuels and biochemicals using microbial cell factories plays a fundamental role in the future bioeconomy. The development of cell factories capable of efficiently fermenting complex biomass streams will improve the cost-effectiveness of microbial conversion processes. At present, inhibitory compounds found in hydrolysates of lignocellulosic biomass substantially influence the performance of a cell factory and the economic feasibility of lignocellulosic biofuels and chemicals. Here, we present and statistically analyze data on Saccharomyces cerevisiae mutants engineered for altered tolerance towards the most common inhibitors found in lignocellulosic hydrolysates: acetic acid, formic acid, furans, and phenolic compounds. We collected data from 7971 experiments including single overexpression or deletion of 3955 unique genes. The mutants included in the analysis had been shown to display increased or decreased tolerance to individual inhibitors or combinations of inhibitors found in lignocellulosic hydrolysates. Moreover, the data included mutants grown on synthetic hydrolysates, in which inhibitors were added at concentrations that mimicked those of lignocellulosic hydrolysates. Genetic engineering aimed at improving inhibitor or hydrolysate tolerance was shown to alter the specific growth rate or length of the lag phase, cell viability, and vitality, block fermentation, and decrease product yield. Different aspects of strain engineering aimed at improving hydrolysate tolerance, such as choice of strain and experimental set-up are discussed and put in relation to their biological relevance. While successful genetic engineering is often strain and condition dependent, we highlight the conserved role of regulators, transporters, and detoxifying enzymes in inhibitor tolerance. The compiled meta-analysis can guide future engineering attempts and aid the development of more efficient cell factories for the conversion of lignocellulosic biomass.
|
|
| 22. |
- Ferreira, Sofia, et al.
(författare)
-
Metabolic engineering strategies for butanol production in Escherichia coli
- 2020
-
Ingår i: Biotechnology and Bioengineering. - : Wiley. - 0006-3592 .- 1097-0290. ; 117:8, s. 2571-2587
-
Forskningsöversikt (refereegranskat)abstract
- The global market of butanol is increasing due to its growing applications as solvent, flavoring agent, and chemical precursor of several other compounds. Recently, the superior properties of n-butanol as a biofuel over ethanol have stimulated even more interest. (Bio)butanol is natively produced together with ethanol and acetone by Clostridium species through acetone-butanol-ethanol fermentation, at noncompetitive, low titers compared to petrochemical production. Different butanol production pathways have been expressed in Escherichia coli, a more accessible host compared to Clostridium species, to improve butanol titers and rates. The bioproduction of butanol is here reviewed from a historical and theoretical perspective. All tested rational metabolic engineering strategies in E. coli to increase butanol titers are reviewed: manipulation of central carbon metabolism, elimination of competing pathways, cofactor balancing, development of new pathways, expression of homologous enzymes, consumption of different substrates, and molecular biology strategies. The progress in the field of metabolic modeling and pathway generation algorithms and their potential application to butanol production are also summarized here. The main goals are to gather all the strategies, evaluate the respective progress obtained, identify, and exploit the outstanding challenges.
|
|
| 23. |
|
|
| 24. |
- McKee, Lauren S., et al.
(författare)
-
A GH115 alpha-glucuronidase from Schizophyllum commune contributes to the synergistic enzymatic deconstruction of softwood glucuronoarabinoxylan
- 2016
-
Ingår i: Biotechnology for Biofuels. - : BioMed Central. - 1754-6834. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Lignocellulosic biomass from softwood represents a valuable resource for the production of biofuels and bio-based materials as alternatives to traditional pulp and paper products. Hemicelluloses constitute an extremely heterogeneous fraction of the plant cell wall, as their molecular structures involve multiple monosaccharide components, glycosidic linkages, and decoration patterns. The complete enzymatic hydrolysis of wood hemicelluloses into monosaccharides is therefore a complex biochemical process that requires the activities of multiple degradative enzymes with complementary activities tailored to the structural features of a particular substrate. Glucuronoarabinoxylan (GAX) is a major hemicellulose component in softwood, and its structural complexity requires more enzyme specificities to achieve complete hydrolysis compared to glucuronoxylans from hardwood and arabinoxylans from grasses. Results: We report the characterisation of a recombinant alpha-glucuronidase (Agu115) from Schizophyllum commune capable of removing (4-O-methyl)-glucuronic acid ((Me) GlcA) residues from polymeric and oligomeric xylan. The enzyme is required for the complete deconstruction of spruce glucuronoarabinoxylan (GAX) and acts synergistically with other xylan-degrading enzymes, specifically a xylanase (Xyn10C), an alpha-l-arabinofuranosidase (AbfA), and a beta-xylosidase (XynB). Each enzyme in this mixture showed varying degrees of potentiation by the other activities, likely due to increased physical access to their respective target monosaccharides. The exo-acting Agu115 and AbfA were unable to remove all of their respective target side chain decorations from GAX, but their specific activity was significantly boosted by the addition of the endo-Xyn10C xylanase. We demonstrate that the proposed enzymatic cocktail (Agu115 with AbfA, Xyn10C and XynB) achieved almost complete conversion of GAX to arabinofuranose (Araf), xylopyranose (Xylp), and MeGlcA monosaccharides. Addition of Agu115 to the enzymatic cocktail contributes specifically to 25 % of the conversion. However, traces of residual oligosaccharides resistant to this combination of enzymes were still present after deconstruction, due to steric hindrances to enzyme access to the substrate. Conclusions: Our GH115 alpha-glucuronidase is capable of finely tailoring the molecular structure of softwood GAX, and contributes to the almost complete saccharification of GAX in synergy with other exo- and endo-xylan-acting enzymes. This has great relevance for the cost-efficient production of biofuels from softwood lignocellulose.
|
|
| 25. |
|
|
