1. |
|
|
2. |
|
|
3. |
- Nicholls, Ian A., et al.
(författare)
-
Rational design of biomimetic molecularly imprinted materials : theoretical and computational strategies for guiding nanoscale structured polymer development
- 2011
-
Ingår i: Analytical and Bioanalytical Chemistry. - : Springer Science and Business Media LLC. - 1618-2642 .- 1618-2650. ; 400:6, s. 1771-1786
-
Forskningsöversikt (refereegranskat)abstract
- In principle, molecularly imprinted polymer science and technology provides a means for ready access to nano-structured polymeric materials of predetermined selectivity. The versatility of the technique has brought it to the attention of many working with the development of nanomaterials with biological or biomimetic properties for use as therapeutics or in medical devices. Nonetheless, the further evolution of the field necessitates the development of robust predictive tools capable of handling the complexity of molecular imprinting systems. The rapid growth in computer power and software over the past decade has opened new possibilities for simulating aspects of the complex molecular imprinting process. We present here a survey of the current status of the use of in silico-based approaches to aspects of molecular imprinting. Finally, we highlight areas where ongoing and future efforts should yield information critical to our understanding of the underlying mechanisms sufficient to permit the rational design of molecularly imprinted polymers.
|
|
4. |
- Co, Michelle, 1975-, et al.
(författare)
-
Degradation effects in the extraction of antioxidants from birch bark using water at elevated temperature and pressure
- 2012
-
Ingår i: Analytica Chimica Acta. - : Elsevier BV. - 0003-2670 .- 1873-4324. ; 716, s. 40-48
-
Tidskriftsartikel (refereegranskat)abstract
- Experiments with birch bark samples have been carried to enable a distinction between extraction and degradation effects during pressurised hot water extraction. Two samples, E80 and El 80, contained birch bark extracts obtained after extraction at 80 and 180 degrees C for up to 45 min, respectively. Two other samples, P80 and P180, were only extracted for 5 min at the two temperatures and were thereafter filtered and hydrothermally treated at 80 and 180 degrees C, respectively. During the latter treatment, samples were collected at different times to assess the stability of the extracted compounds. An offline DPPH (2,2-diphenyl-1-picrylhydrazyl) assay, as well as a high performance liquid chromatographic separation coupled to an electrochemical detector, were used to determine the antioxidant capacity of the processed samples. The results obtained with the different techniques were compared to assess the yield of the extraction and degradation processes. In addition, an online hyphenated system comprising high performance liquid chromatography coupled to diode-array; electrochemical; and tandem mass spectrometric detection (HPLC-DAD-ECD-MS/MS) was used to study the compositions of the extracts in more detail. The results for the samples processed at 80 degrees C showed that the extraction reached a steady-state already after 5 min, and that the extracted compounds were stable throughout the entire extraction process. Processing at 180 degrees C, on the other hand, gave rise to partly degraded extracts with a multitude of peaks in both the diode array and electrochemical detectors, and a higher antioxidant capacity compared to for the extracts obtained at 80 degrees C. It is concluded that HPLC-DAD-ECD is a more appropriate technique for the determination of antioxidants than the DPPH assay. The mass spectrometric results indicate that one of the extracted antioxidants, catechin, was isomerised to its diastereoisomers; (+)-catechin, (-)-catechin, (+)-epicatechin, and (-)-epicatechin.
|
|
5. |
- Sauer, Christopher, 1993
(författare)
-
Green Aromatics: Catalytic Valorisation of bio-derived 2,5-dimethylfuran over Zeolites and Zeotypes
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis discusses the use of biomass as a potentially green feedstock for the chemical industry in the urgent shift away from fossil resources. I elaborate on reasons why we cannot afford to burn virgin biomass for energy production, among them a variety of ecosystem services that forests and other lands provide. In addition, the utilisation of biomass should be focused on products that sequester and lock away carbon for more extended periods, e.g. timber, materials and chemicals. In particular, biomass can be used as an alternative "carbon neutral" feedstock for the chemical industry, where we can preserve the already existing chemical complexity in the bio-based molecules. One example is the upgrading of furans to benzene, toluene and xylene (BTX) aromatics with the help of zeolite catalysis. These aromatics are important commodity chemicals, where the shift to a bio-based resource could make use of already existing knowledge, catalyst and production infrastructure. However, research is necessary to understand these new feedstock molecules and their interaction with the catalysts and to enable the design of applicable catalysts. In order to study the interaction of the furans, in particular 2,5-dimethylfuran (2,5-dmf), I describe and discuss the development of an analytical methodology that utilises infrared spectroscopy and mass spectrometry for the on-line identification and quantification of product molecules during catalytic reactions. This on-line analysis method is then applied to the catalytic conversion of 2,5-dmf to aromatics over a range of zeolite and zeotype catalysts. In-depth studies with ammonia as a probe molecule of the catalytic active acid sites, as well as temperature programmed experiments with ammonia and 2,5-dmf give insights into product distribution, selectivity changes and deactivation of the catalyst. For example, olefins and aromatics are initially preferred products, while with increasing time on stream, the isomerisation of 2,5-dmf becomes dominant. The incorporation of Ga into the zeotype framework, resulting in a Ga-Silicate, shows how targeted catalyst design can increase overall aromatics production. This catalyst is also suitable for selective isomerisation of 2,5-dmf to 2,4-dimethylfuran, which has a rare substitution pattern. Finally, itwas found that the most valuable of BTX, p -xylene, can be produced more selectively when 2,5-dmf is pre-adsorbed onto zeolite ZSM-5 and then released during a temperature programmed product desorption.
|
|
6. |
- Wiklander, Jesper G., 1974-, et al.
(författare)
-
Towards a synthetic avidin mimic
- 2011
-
Ingår i: Analytical and Bioanalytical Chemistry. - : Springer Science and Business Media LLC. - 1618-2642 .- 1618-2650. ; 400:5, s. 1397-1404
-
Tidskriftsartikel (refereegranskat)abstract
- A series of streptavidin-mimicking molecularly imprinted polymers has been developed and evaluated for their biotin binding characteristics. A combination of molecular dynamics and NMR spectroscopy was used to examine potential polymer systems, in particular with the functional monomers methacrylic acid and 2-acrylamidopyridine. The synthesis of copolymers of ethylene dimethacrylate and one or both of these functional monomers was performed. A combination of radioligand binding studies and surface area analyses demonstrated the presence of selectivity in polymers prepared using methacrylic acid as the functional monomer. This was predicted by the molecular dynamics studies showing the power of this methodology as a prognostic tool for predicting the behavior of molecularly imprinted polymers.
|
|
7. |
- Bannan, T. J., et al.
(författare)
-
A method for extracting calibrated volatility information from the FIGAERO-HR-ToF-CIMS and its experimental application
- 2019
-
Ingår i: Atmospheric Measurement Techniques. - : Copernicus GmbH. - 1867-1381 .- 1867-8548. ; 12:3, s. 1429-1439
-
Tidskriftsartikel (refereegranskat)abstract
- The Filter Inlet for Gases and AEROsols (FIGAERO) is an inlet specifically designed to be coupled with the Aerodyne High-Resolution Time-of-Flight Chemical Ionization Mass Spectrometer (HR-ToF-CIMS). The FIGAERO-HR-ToF-CIMS provides simultaneous molecular information relating to both the gas- and particle-phase samples and has been used to extract vapour pressures (VPs) of the compounds desorbing from the filter whilst giving quantitative concentrations in the particle phase. However, such extraction of vapour pressures of the measured particle-phase components requires use of appropriate, well-defined, reference compounds. Vapour pressures for the homologous series of polyethylene glycols (PEG) ((H-(O-CH 2 CH 2 ) n -OH) for n = 3 to n = 8), covering a range of vapour pressures (VP) (10 -1 to 10 -7 Pa) that are atmospherically relevant, have been shown to be reproduced well by a range of different techniques, including Knudsen Effusion Mass Spectrometry (KEMS). This is the first homologous series of compounds for which a number of vapour pressure measurement techniques have been found to be in agreement, indicating the utility as a calibration standard, providing an ideal set of benchmark compounds for accurate characterization of the FIGAERO for extracting vapour pressure of measured compounds in chambers and the real atmosphere. To demonstrate this, single-component and mixture vapour pressure measurements are made using two FIGAERO-HR-ToF-CIMS instruments based on a new calibration determined from the PEG series. VP values extracted from both instruments agree well with those measured by KEMS and reported values from literature, validating this approach for extracting VP data from the FIGAERO. This method is then applied to chamber measurements, and the vapour pressures of known products are estimated. © 2019 Author(s).
|
|
8. |
- Guo, Y. D., et al.
(författare)
-
Identification of highly oxygenated organic molecules and their role in aerosol formation in the reaction of limonene with nitrate radical
- 2022
-
Ingår i: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 22:17, s. 11323-11346
-
Tidskriftsartikel (refereegranskat)abstract
- Nighttime NO3-initiated oxidation of biogenic volatile organic compounds (BVOCs) such as monoterpenes is important for the atmospheric formation and growth of secondary organic aerosol (SOA), which has significant impact on climate, air quality, and human health. In such SOA formation and growth, highly oxygenated organic molecules (HOM) may be crucial, but their formation pathways and role in aerosol formation have yet to be clarified. Among monoterpenes, limonene is of particular interest for its high emission globally and high SOA yield. In this work, HOM formation in the reaction of limonene with nitrate radical (NO3) was investigated in the SAPHIR chamber (Simulation of Atmospheric PHotochemistry In a large Reaction chamber). About 280 HOM products were identified, grouped into 19 monomer families, 11 dimer families, and 3 trimer families. Both closed-shell products and open-shell peroxy radicals (RO2 center dot) 2 were observed, and many of them have not been reported previously. Monomers and dimers accounted for 47% and 47% of HOM concentrations, respectively, with trimers making up the remaining 6 %. In the most abundant monomer families, C10H15-17NO6-14, carbonyl products outnumbered hydroxyl products, indicating the importance of RO2 center dot termination by unimolecular dissociation. Both RO2 center dot autoxidation and alkoxy-peroxy pathways were found to be important processes leading to HOM. Time-dependent concentration profiles of monomer products containing nitrogen showed mainly second-generation formation patterns. Dimers were likely formed via the accretion reaction of two monomer RO2 center dot , and HOM-trimers via the accretion reaction between monomer RO2 center dot and dimer RO2 center dot. Trimers are suggested to play an important role in new particle formation (NPF) observed in our experiment. A HOM yield of 1.5%(+1.7%)(-0.7%) was estimated considering only first-generation products. SOA mass growth could be reasonably explained by HOM condensation on particles assuming irreversible uptake of ultra-low volatility organic compounds (ULVOCs), extremely low volatility organic compounds (ELVOCs), and low volatility organic compounds (LVOCs). This work provides evidence for the important role of HOM formed via the limonene +NO3 reaction in NPF and growth of SOA particles.
|
|
9. |
|
|
10. |
- Le Breton, Michael, 1986, et al.
(författare)
-
Application of a FIGAERO ToF CIMS for on-line characterization of real-world fresh and aged particle emissions from buses
- 2019
-
Ingår i: Aerosol Science and Technology. - : Informa UK Limited. - 0278-6826 .- 1521-7388. ; 53:3, s. 244-259
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019, © 2019 The Author(s). Published with license by Taylor & Francis Group, LLC. On-line chemical characterization of real-world particle emissions from 13 transit buses was performed using a chemical ionization mass spectrometer (CIMS) equipped with a filter inlet for gases and aerosols (FIGAERO). In addition to the fresh emissions the emissions were artificially aged using a potential aerosol mass reactor (Go:PAM). The buses studied were running on different fuel types (diesel, compressed natural gas, and rapeseed methyl ester) and exhaust after-treatment systems (selective catalytic reduction (SCR), exhaust gas recirculation (EGR), and a three-way catalyst). When evaluating emissions from passing exhaust plumes using the FIGAERO ToF-CIMS, two technical features were highlighted from this work, the use of high mass calibrants and the factor enhancement method to be able to filter important compounds from mass spectra including hundreds of species. Here, acetate was used as the reagent ion to enable detection of highly oxygenated species in the exhaust particle emissions with potential high toxicity and/or secondary organic aerosol formation (SOA) potential. The acetate ionization scheme accounted for 4% to 46% of the total emitted particulate mass through identification of 61 species in the spectra. For aged emission the various fuel types provided overlapping species that could explain up to 19% of the aged emissions. This is hypothesized to come from the oxidation of engine lubrication oil, thus a common source for various fuels which was further supported by laboratory measurements. Specific markers from the SCR technology, such as urea oxidation products and further byproducts from hydrolysis were identified and attributed to reactions of isocyanic acid.
|
|
11. |
- Le Breton, Michael, 1986, et al.
(författare)
-
Chlorine oxidation of VOCs at a semi-rural site in Beijing: significant chlorine liberation from ClNO2 and subsequent gas- and particle-phase Cl-VOC production
- 2018
-
Ingår i: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 18:17, s. 13013-13030:18, s. 13013-13030
-
Tidskriftsartikel (refereegranskat)abstract
- Nitryl chloride (ClNO2) accumulation at night acts as a significant reservoir for active chlorine and impacts the following day's photochemistry when the chlorine atom is liberated at sunrise. Here, we report simultaneous measurements of N2O5 and a suite of inorganic halogens including ClNO2 and reactions of chloride with volatile organic compounds (Cl-VOCs) in the gas and particle phases utilising the Filter Inlet for Gas and AEROsols time-of-flight chemical ionisation mass spectrometer (FIGAERO-ToF-CIMS) during an intensive measurement campaign 40 km northwest of Beijing in May and June 2016. A maximum mixing ratio of 2900 ppt of ClNO2 was observed with a mean campaign nighttime mixing ratio of 487 ppt, appearing to have an anthropogenic source supported by correlation with SO2, CO and benzene, which often persisted at high levels after sunrise until midday. This was attributed to such high mixing ratios persisting after numerous e-folding times of the photolytic lifetime enabling the chlorine atom production to reach 2.3 x 10(5) molecules cm(-3) from ClNO2 alone, peaking at 09:30 LT and up to 8.4 x 10(5) molecules cm(-3) when including the supporting inorganic halogen measurements. Cl-VOCs were observed in the particle and gas phases for the first time at high time resolution and illustrate how the iodide ToF-CIMS can detect unique markers of chlorine atom chemistry in ambient air from both biogenic and anthropogenic sources. Their presence and abundance can be explained via time series of their measured and steady-state calculated precursors, enabling the assessment of competing OH and chlorine atom oxidation via measurements of products from both of these mechanisms and their relative contribution to secondary organic aerosol (SOA) formation.
|
|
12. |
- Li, J. J., et al.
(författare)
-
Characterization of Aerosol Aging Potentials at Suburban Sites in Northern and Southern China Utilizing a Potential Aerosol Mass (Go:PAM) Reactor and an Aerosol Mass Spectrometer
- 2019
-
Ingår i: Journal of Geophysical Research-Atmospheres. - : American Geophysical Union (AGU). - 2169-897X .- 2169-8996. ; 124:10, s. 5629-5649
-
Tidskriftsartikel (refereegranskat)abstract
- Aerosol mass spectrometry was used to characterize submicron aerosols before and after aging in a Gothenburg Potential Aerosol Mass (Go:PAM) reactor at two suburban sites in China, one in northern China at Changping (CP), Beijing, and a second in southern China at Hong Kong (HK). Organic aerosol (OA) dominated in the ambient nonrefractory particulate matter <1m (NR-PM1) for both CP (42-71%) and HK (43-61%), with a large contribution from secondary OA factors that were semivolatile oxygenated (SVOOA) and low-volatility oxygenated (LVOOA). Under constant OH exposure, OA enhancement (78-98%) dominated the NR-PM1 mass increment at both sites, while nitrate was enhanced the most among the inorganic species (7-9%). Overall, the CP site exhibited higher OA oxidation potential and more enhancement of SVOOA than LVOOA (7.5 vs. 2.7g/m(3)), but the reverse was observed in HK (0.8 vs. 2.6g/m(3)). In CP, more enhancement of the less oxygenated SVOOA suggests that aerosol aging was more sensitive to the abundant locally emitted primary OA and volatile organic compound precursors. On the contrary, the more formation of the highly oxidized LVOOA in HK indicates that aerosol aging mainly escalated the degree of oxygenation of OA as ambient aerosol was already quite aged and there was a lack of volatile organic compound precursors. The comparative measurements using the same oxidation system reveal distinct key factors and mechanisms that influence secondary aerosol formation in two suburban locations in China, providing scientific insights to assist formulation of location-specific mitigation measures of secondary pollution. Plain Language Summary Atmospheric submicron particles have significant impacts on the climate and human health. A large part of these particles are formed secondarily through successive aging of primary emissions. To study such aging processes, we used a reactor that can provide highly oxidizing conditions to simulate the oxidation of ambient aerosols at accelerated rates. An online mass spectrometer was connected after the reactor to measure changes in aerosol mass concentration and chemical composition between the ambient samples and the oxidized ones. We presented the first comparative measurements of the aging potentials of ambient aerosols in two suburban sites in northern and southern China (Changping District in Beijing, and Hong Kong). Results showed that generally aerosols at the Changping site had higher aging potentials after passing through the oxidation reactor, probably due to more local emissions of precursors, while air masses in Hong Kong were already in a higher oxidation state with lower aging potentials, mainly because of strong impacts from long-range transported pollution sources. Distinct aerosol aging pathways related to different ambient precursors were observed at the two sites. Understanding of the different characteristics of aerosol aging processes can lead to advances in air quality modeling and pollution management.
|
|
13. |
- Mohr, Claudia, et al.
(författare)
-
Molecular identification of organic vapors driving atmospheric nanoparticle growth
- 2019
-
Ingår i: Nature communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Particles formed in the atmosphere via nucleation provide about half the number of atmospheric cloud condensation nuclei, but in many locations, this process is limited by the growth of the newly formed particles. That growth is often via condensation of organic vapors. Identification of these vapors and their sources is thus fundamental for simulating changes to aerosol-cloud interactions, which are one of the most uncertain aspects of anthropogenic climate forcing. Here we present direct molecular-level observations of a distribution of organic vapors in a forested environment that can explain simultaneously observed atmospheric nanoparticle growth from 3 to 50nm. Furthermore, the volatility distribution of these vapors is sufficient to explain nanoparticle growth without invoking particle-phase processes. The agreement between observed mass growth, and the growth predicted from the observed mass of condensing vapors in a forested environment thus represents an important step forward in the characterization of atmospheric particle growth.
|
|
14. |
- Abrahamsson, Maria, et al.
(författare)
-
Steric influence on the excited-state lifetimes of ruthenium complexes with bipyridyl-alkanylene-pyridyl ligands.
- 2008
-
Ingår i: Inorganic Chemistry. - : ACS. - 0020-1669 .- 1520-510X. ; 47:9, s. 3540-3548
-
Tidskriftsartikel (refereegranskat)abstract
- The structural effect on the metal-to-ligand charge transfer (MLCT) excited-state lifetime has been investigated in bis-tridentate Ru(II)-polypyridyl complexes based on the terpyridine-like ligands [6-(2,2'-bipyridyl)](2-pyridyl)methane (1) and 2-[6-(2,2'-bipyridyl)]-2-(2-pyridyl)propane (2). A homoleptic ([Ru(2)(2)](2+)) and a heteroleptic complex ([Ru(ttpy)(2)](2+)) based on the new ligand 2 have been prepared and their photophysical and structural properties studied experimentally and theoretically and compared to the results for the previously reported [Ru(1)(2)](2+). The excited-state lifetime of the homoleptic Ru-II complex with the isopropylene-bridged ligand 2 was found to be 50 times shorter than that of the corresponding homoleptic Ru-II complex of ligand 1, containing a methylene bridge. A comparison of the ground-state geometries of the two homoleptic complexes shows that steric interactions involving the isopropylene bridges make the coordination to the central Ru-II ion less octahedral in [Ru(2)(2)](2+) than in [Ru(1)(2))(2+). Calculations indicate that the structural differences in these complexes influence their ligand field splittings as well as the relative stabilities of the triplet metal-to-ligand charge transfer ((MLCT)-M-3) and metal-centered ((MC)-M-3) excited states. The large difference in measured excited-state lifetimes for the two homoleptic Ru-II complexes is attributed to a strong influence of steric interactions on the ligand field strength, which in turn affects the activation barriers for thermal conversion from (MLCT)-M-3 states to short-lived (MC)-M-3 states.
|
|
15. |
- Nyström-Larsson, Ingalill, 1969, et al.
(författare)
-
Materialanalys av sydsvenskt bonadsmåleri
- 2007
-
Ingår i: Rapport: Sammanfattning av Riksantikvarieämbetets seminarieserie 2007 kring pågående FoU-projekt. ; , s. 23-24
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Bonadsmåleriet hade sin storhetstid 1750-1850, och var influerat av medeltida kalkmåleri och bildvävnad i kyrkorna. Bonaderna var temporära och prydde stugorna till fest. Motiven kan vara både bibliska och profana. Materialet är tyger (återanvända och hopfogade) och senare även papper. Mot slutet av perioden övergår hantverket i massproduktion. Tidigare har bonaderna framför allt studerats inom humaniora (exempelvis etnologi) och ett naturvetenskapligt perspektiv har saknats. Därför finns mycket knapphändiga uppgifter om materialet. Syftet med projektet är att: • Kartlägga materialanvändningen • Tolka och förstå materialutvecklingen • Klarlägga innehållet i de otydliga trivialnamnen • Bygga upp ett referensmaterial Genomförande Ett antal frågeställningar har satts upp inför studiet: • Vilka materialval har man gjort? • Skiljer måleriteknik, färg, materialval mellan bonader, och går det att urskilja geografiska skillnader eller är det en tidsmässig utveckling? • Kan bonader attribueras utifrån materialval och färgval? • Vad är det för pigment som döljs i trivialnamnen? Skriftliga källor räcker inte för att svara på dessa frågor utan måste komplet-teras med naturvetenskapliga analyser. Diskussion kring RÄA-seminariets specifika frågeställningar På vad sätt bidrar ert projekt till kunskapsuppbyggnaden inom ert område? • Projektet är också ett pilotprojekt och den kunskap som vinns kan också appliceras på annat än bonadsmåleri. Utifrån resultaten kan man också gå vidare och titta på handelsvägar, infrastruktur etc. • En referensdatabas byggs upp och kan kanske också användas för an-nat material. På vilket sätt skulle resultaten från ert projekt kunna tillämpas mer konkret inom kulturmiljösektorn? • Ett viktigt mål är att hitta analysmetoder som inte förstör materialet, och som helst kan göras på plats så att materialet inte behöver flyttas (Raman spektroskopi). • Som konstaterades ovan kan resultaten från den kemiska analysen visa att en sådan kan komplettera traditionella historiska metoder också inom andra områden än bonadsmåleri. Frågor och öppen diskussion • Ännu har man inte hittat några speciella pigment eller färger, men analysen är inte klar. • Analysmaterialet som valts ut är signerade bonader. • Eftersom uppbyggandet av referensdatabaser är centralt i konserva-torns arbete är det viktigt att sprida resultaten av projektet.
|
|
16. |
- Altun, Zeki, 1978-
(författare)
-
New Techniques for Sample Preparation in Analytical Chemistry : Microextraction in Packed Syringe (MEPS) and Methacrylate Based Monolithic Pipette Tips
- 2008
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Sample preparation is often a bottleneck in systems for chemical analysis. The aim of this work was to investigate and develop new techniques to address some of the shortcomings of current sample preparation methods. The goal has been to provide full automation, on-line coupling to detection systems, short sample preparation times and high-throughput. In this work a new technique for sample preparation that can be connected on-line to liquid chromatography (LC) and gas chromatography (GC) has been developed. Microextraction in packed syringe (MEPS) is a new solid-phase extraction (SPE) technique that is miniaturized and can be fully automated. In MEPS approximately 1 mg of sorbent material is inserted into a gas tight syringe (100-250 μL) as a plug. Sample preparation takes place on the packed bed. Evaluation of the technique was done by the determination of local anaesthetics in human plasma samples using MEPS on-line with LC and tandem mass spectrometry (MS-MS). MEPS connected to an autosampler was fully automated and clean-up of the samples took about one minute. In addition, in the case of plasma samples the same plug of sorbent could be used for about 100 extractions before it was discarded. A further aim of this work was to increase sample preparation throughput. To do that disposable pipette tips were packed with a plug of porous polymer monoliths as sample adsorbent and were then used in connection with 96-well plates and LC-MS-MS. The evaluation of the methods was done by the analysis of local anaesthetics lidocaine and ropivacaine, and anti-cancer drug roscovitine in plasma samples. When roscovitine and lidocaine in human plasma and water samples were used as model substances, a 96-plate was handled in about two minutes. Further, disposable pipette tips may be produced at low cost and because they are used only once, carry-over is eliminated.
|
|
17. |
- Hallgren, Pär, 1976-, et al.
(författare)
-
Improved spectrophotometric vitellogenin determination via alkali-labile phosphate in fish plasma : a cost effective approach for assessment of endocrine
- 2009
-
Ingår i: International Journal of Environmental Analytical Chemistry. - 0306-7319 .- 1029-0397. ; 89:14, s. 1023-1042
-
Tidskriftsartikel (refereegranskat)abstract
- Vitellogenin (VTG) is a well known protein biomarker for exposure to environmental estrogens and possible endocrine disruption in fish. VTG is very dominant in plasma after the onset of vitellogenesis and the protein is heavily phosphorylated. This enables indirect quantification through measurement of alkali-labile protein bound phosphate (ALP) as an alternative to the more expensive enzyme linked immunosorbent assay. Good correlation has previously been shown between ALP and actual VTG levels but little effort has been made to investigate the method in an analytical way e.g., to assure the origin of the measured phosphate. During this method development care has been taken to rule out non-VTG sources of phosphate such as phospholipids and free phosphate in the blood plasma. Sample preparation has been simplified and unnecessary steps have been omitted. The common spectrophotometric measurement for ALP involves measurement at two wavelengths and calculation of corrected absorbance values. With a quick phase separation step the spectrophotometric phosphate determination using molybdic acid and ascorbic acid has been improved and all matrix interference has been eliminated. The final ALP method presented here has a detection limit of 3.2 µg PO43-/ml plasma which is six times lower than similar methods and it also has less variability. A high sample throughput in comparison to previous ALP methods is possible after scaling down sample and reagent volumes to fit in a 96 well microtiter plate. The cost for buying all chemicals and plastic consumer goods for setting up the indirect protocol for the analysis of 1000 samples is only circa 350 euro. This is only 1% of the material cost for buying commercially available test kit for direct quantification of VTG in the same number of samples. The ALP method should thus be of interest also for applied scientists outside advanced research laboratories.
|
|
18. |
- Svensson, Britt-Marie, 1956-
(författare)
-
Methodology for evaluation of hazards from solid waste and landfill-generated leachate
- 2008
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- A methodology based on an analytical protocol for evaluation of hazards from landfill leachate and solid waste is described. A dynamic analytical protocol, the LAQUA protocol, including measurements of inorganic and water-quality parameters, polar and non-polar organic marker compounds, and toxicity, was constructed. An acute toxicity test, using the brackish water crustacean Artemia salina as test organism, was developed. The methodology was applied to authentic problems such as investigation of different treatment techniques for landfill leachate, evaluation of leaching tests and characterization of solid wastes, and an investigation of a filter material aimed for leachate treatment. Investigated treatment methods comprised in all cases pre-treatment by aeration combined with sedimentation, followed by one of: bioremediation, ozonation, chemical oxidation by Fenton’s reagent, or geo-bed filters. Evaluated filter materials were mixtures of natural or residual waste products. A combination of pre-treatment followed by a geo-bed filter containing a mixture of peat and carbon-containing ash gave an efficient simultaneous removal of metals and organic pollutants. The performance of two leaching tests for characterization of solid waste, the up-flow percolation test (SIS-CEN/TS 14405:2004) and the batch test (SS-EN 12457 -3), was investigated. Solid waste materials (sludge from street gutters and fragmented metallic waste) were characterized using leaching tests and the hazards of the materials were evaluated in the eluate, obtained at specific liquid-to-solid ratios (L/S). The L/S 2 and L/S 10 values were compared with limit values included in the waste acceptance criteria (WAC). The analyses were extended towards specific organic compounds, such as individual phenolic compounds and polychlorinated biphenyls (PCB). Organic compounds were found in eluates from both types of tests, showing the possibility to use these methods to evaluate the leaching of such compounds from waste materials. The use of authentic leachate as leachant, leads to increased concentrations of heavy metals in the eluate, compared to the prescribed use of demineralised water as leachant. Generally good agreement was found between the results of the two leaching methods. A strategy based on batch tests is described for investigation of a filter material for leachate treatment. Batch tests gave suitable information about the leaching from new and used material, and showed high removal efficiencies of metals and non-polar organic compounds. However, for investigation of removal of polar organic markers (e.g. phenolic compounds) a batch test is not sufficient and should be supplemented by a column test.
|
|
19. |
- Razaq, Aamir, et al.
(författare)
-
High-capacity Conductive Nanocellulose Paper Sheets for Electrochemically Controlled Extraction of DNA Oligomers
- 2011
-
Ingår i: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 6:12, s. e29243-
-
Tidskriftsartikel (refereegranskat)abstract
- Highly porous polypyrrole (PPy)-nanocellulose paper sheets have been evaluated as inexpensive and disposable electrochemically controlled three-dimensional solid phase extraction materials. The composites, which had a total anion exchange capacity of about 1.1 mol kg(-1), were used for extraction and subsequent release of negatively charged fluorophore tagged DNA oligomers via galvanostatic oxidation and reduction of a 30-50 nm conformal PPy layer on the cellulose substrate. The ion exchange capacity, which was, at least, two orders of magnitude higher than those previously reached in electrochemically controlled extraction, originated from the high surface area (i.e. 80 m(2) g(-1)) of the porous composites and the thin PPy layer which ensured excellent access to the ion exchange material. This enabled the extractions to be carried out faster and with better control of the PPy charge than with previously employed approaches. Experiments in equimolar mixtures of (dT)(6), (dT)(20), and (dT)(40) DNA oligomers showed that all oligomers could be extracted, and that the smallest oligomer was preferentially released with an efficiency of up to 40% during the reduction of the PPy layer. These results indicate that the present material is very promising for the development of inexpensive and efficient electrochemically controlled ion-exchange membranes for batch-wise extraction of biomolecules.
|
|
20. |
- Lundborg, Lina, 1986-, et al.
(författare)
-
Conifer chemical defenses influence meal properties of the pine weevil Hylobius abietis
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Chemical defenses of conifers can be experimentally activated to respond more efficiently to feeding damage by insects. One chemical elicitor that triggers plant defenses, and thereby protects conifers, is methyl jasmonate (MeJA). However, there is little known about the associations between MeJA-induced conifer defenses, and the meal properties of phytophagous insects. To address this knowledge gap, we have analyzed relations between volatile contents of Scots pine (Pinus sylvestris L.) tissues, and meal properties of the pine weevil (Hylobius abietis (L.)). Phloem and needles (both weevil target tissues) from MeJA-treated and control seedlings were extracted by n-hexane and analyzed by two-dimensional gas chromatography-mass spectrometry (2D GC-MS). Feeding of pine weevils on seedlings from the same batches were video-recorded to determine meal properties. Multivariate statistical analyses showed that phloem and needle contents of MeJA-treated seedlings had different volatile compositions from the control seedlings. Levels of (+)-α-pinene were high, and levels of the antifeedant 2-phenylethanol were low, in phloem of control seedlings with feeding damage. Accordingly, pine weevils fed more slowly and had shorter meals on MeJA-treated seedlings. In addition, the chemical compositions of phloem and needles – and accordingly weevil meal durations on them – were more similar in MeJA-treated seedlings than in controls. The results illustrate that detailed knowledge of insect responses can help efforts to identify and elucidate specific roles of resistance agents in complex chemical profiles.
|
|
21. |
- Lundborg, Lina, 1986-, et al.
(författare)
-
Constitutive and MeJA-induced terpenes in Pinus pinaster and Pinus radiata in relation to Hylobius abietis
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- The feeding preference of the pine weevil to Maritime pine (Pinus pinaster Ait.) and Monterey pine (Pinus radiata D. Don) differ in laboratory tests and in the field: Can this be explained by the volatile compounds released by the seedlings? Understanding the interaction between the chemical defenses of young pines and feeding preferences of the pine weevil (Hylobius abietis (L.)) may improve protection methods of conifer seedlings in Europe and Asia. In order to increase the resistance of seedlings of P. pinaster and P. radiata, these were treated with the chemical elicitor methyl jasmonate (MeJA). The effects of the MeJA treatments on the amounts and composition of volatile terpenes in tissues (needles and phloem) were investigated by extracting these in hexane, whereafter the volatile constituents of the extracts were separated and identified by gas chromatography-mass spectrometry (GC-MS). In addition, the most abundant monoterpenes (α-pinene and β-pinene) were separated on a chiral column in their enantiomers. Already at the lowest concentration of MeJA treatment, 5 mM, the amounts of volatile terpenes in the needles of P. radiata increased and the seedling heights were reduced. In P. pinaster, on the other hand, no effect from the MeJA treatment was observed on the total volatile terpenes in the needles, and only at the strongest MeJA concentration, the seedling heights were affected. In the phloem of P. pinaster the composition of volatile contents, changed after MeJA treatment, showing a reduction in the (+)-α-pinene. In contrast, the amounts of (+)-α-pinene increased in P. radiata. In a previous study, controls and MeJA-treated pine seedlings, from the same MeJA treatment batches as in this study, were subjected to a field trial. In the field, the pine weevils preferred the seedlings of P. radiata over those of P. pinaster. We propose that the differences in induction of (+)-α-pinene may be important for explaining the differences in pine weevil feeding preferences.
|
|
22. |
- Lundborg, Lina, 1986-
(författare)
-
Effects of methyl jasmonate on chemical defenses of conifer seedlings in relation to feeding by Hylobius abietis
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The chemical elicitor methyl jasmonate (MeJA) could replace insecticides in Europe and Asia for protection of young conifers against the pine weevil (Hylobius abietis). This thesis mainly focuses on the effects of MeJA treatment on chemical defenses of conifers from seedling batches with documented field resistance. Tissues of three pine species and one spruce species, with various treatments, were here extracted in hexane, whereafter volatile contents of tissues were separated and analyzed by 2D GC-MS.Induced responses of seedlings of Maritime pine (Pinus pinaster) and Monterey pine (Pinus radiata) to the folivore pine processionary (Thaumetopoea pityocampa), and the phloem-feeder H. abietis, have been studied. Amounts of mono- and sesqui-terpenes (and also non-volatile resin) in conifer tissues (needles and phloem) were less induced by T. pityocampa than by H. abietis.The MeJA-treated seedlings of Scots pine (Pinus sylvestris) changed their composition of phloem monoterpenes (induction of (-)-β-pinene), and were better protected in field than the seedlings of Norway spruce (Picea abies), which increased their total amounts of monoterpenes. Orientation bioassays with H. abietis showed deterrent effects of (-)-β-pinene, (+)-3-carene, (-)-bornyl acetate and 1,8-cineole. Conversely, (-)-α-pinene (induced in P. abies but not in P. sylvestris) was non-deterrent.MeJA-treated seedlings fed on by H. abietis contained higher amounts of the H. abietis antifeedant 2-phenylethanol, in tissues and emissions. Phloem of control seedlings instead induced the (+)-α-pinene, which is one of the enantiomers of the H. abietis attractant α-pinene.In response to MeJA treatment, the relative amounts of the (+)-α-pinene increased in the phloem of P. radiata, while it decreased in P. pinaster phloem. The preference of H. abietis in the field for P. radiata before P. pinaster may be explained by these changes in enantiomers of the H. abietis attractant α-pinene.
|
|
23. |
- Lundborg, Lina, 1986-, et al.
(författare)
-
Induced defenses change the chemical composition of pine seedlings and influence meal properties of the pine weevil Hylobius abietis
- 2016
-
Ingår i: Phytochemistry. - : Elsevier. - 0031-9422 .- 1873-3700. ; 130, s. 99-105
-
Tidskriftsartikel (refereegranskat)abstract
- The defense of conifers against phytophagous insects relies to a large extent on induced chemical defenses. However, it is not clear how induced changes in chemical composition influence the meal properties of phytophagous insects (and thus damage rates). The defense can be induced experimentally with methyl jasmonate (MeJA), which is a substance that is produced naturally when a plant is attacked. Here we used MeJA to investigate how the volatile contents of Scots pine (Pinus sylvestris L.) tissues influence the meal properties of the pine weevil (Hylobius abietis (L.)). Phloem and needles (both weevil target tissues) from MeJA-treated and control seedlings were extracted by n-hexane and analyzed by two-dimensional gas chromatography-mass spectrometry (2D GC-MS). The feeding of pine weevils on MeJA-treated and control seedlings were video-recorded to determine meal properties. Multivariate statistical analyses showed that phloem and needle contents of MeJA-treated seedlings had different volatile compositions compared to control seedlings. Levels of the pine weevil attractant (+)-α-pinene were particularly high in phloem of control seedlings with feeding damage. The antifeedant substance 2-phenylethanol occurred at higher levels in the phloem of MeJA-treated than in control seedlings. Accordingly, pine weevils fed slower and had shorter meals on MeJA-seedlings. The chemical compositions of phloem and needle tissues were clearly different in control seedlings but not in the MeJA-treated seedlings. Consequently, meal durations of mixed meals, i.e. both needles and phloem, were longer than phloem meals on control seedlings, while meal durations on MeJA seedlings did not differ between these meal contents. The meal duration influences the risk of girdling and plant death. Thus our results suggest a mechanism by which MeJA treatment may protect conifer seedlings against pine weevils.
|
|
24. |
- Lundborg, Lina, 1986-, et al.
(författare)
-
Methyl jasmonate-induced monoterpenes in Scots pine and Norway spruce tissues affect pine weevil orientation
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- In large parts of Europe insecticide-free measures for protecting conifer plants are desired to suppress damage by the pine weevil Hylobius abietis (L.). Treatment with methyl jasmonate (MeJA), a chemical elicitor already used in crop production, may enhance expression of chemical defenses in seedlings in conifer regenerations. However, in a previous experiment MeJA treatment resulted in substantially better field protection for Scots pine (Pinus sylvestris L.) than for Norway spruce (Picea abies (L.) Karst.). Hypothesizing that the variations may be at least partly due to volatiles released by MeJA-treated seedlings and their effects on pine weevil orientation, we examined tissue extracts of seedlings (from the same batches as previously used) by two-dimensional GC-MS. We found that the MeJA treatment increased contents of the monoterpene (-)-β-pinene in phloem (the weevil’s main target tissue) of both tree species, however, the (-)-β-pinene/(-)-α-pinene ratio increased more in the phloem of P. sylvestris. We also tested the attractiveness of individual monoterpenes found in conifer tissues (needles and phloem) for pine weevils using an arena with traps baited with single-substance dispensers and pine twigs. Trap catches were reduced when the pine material was combined with a dispenser releasing (-)-β-pinene, (+)-3-carene, (-)-bornyl acetate or 1,8-cineole. However, (-)-α-pinene did not have this effect. Thus, the greater field protection of MeJA-treated P. sylvestris seedlings may be due to the selective induction of increases in contents of the deterrent (-)-β-pinene, in contrast to strong increases in both non-deterrent (-)-α-pinene and the deterrent (-)-β-pinene in P. abies seedlings.
|
|
25. |
- Byström, Emil, 1980-
(författare)
-
Porous polymeric materials for chromatography : Synthesis, functionalization and characterization
- 2009
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Background: Separation science is heavily reliant on materials to fulfill ever more complicated demands raised by other areas of science, notably the rapidly expanding molecular biosciences and environmental monitoring. The key to successful separations lies in a combination of physical properties and surface chemistry of stationary phases used in liquid chromatographic separation, and this thesis address both aspects of novel separation materials.Methods: The thesis accounts for several approaches taken during the course of my graduate studies, and the main approaches have been i) to test a wild-grown variety of published methods for surface treatment of fused silica capillaries, to ascertain firm attachment of polymeric monoliths to the wall of microcolumns prepared in silica conduits; ii) developing a novel porogen scheme for organic monoliths including polymeric porogens and macromonomers; iii) evaluating a mesoporous styrenic monolith for characterization of telomers intended for use in surface modification schemes and; iv) to critically assess the validity of a common shortcut used for estimating the porosity of monoliths prepared in microconduits; and finally v) employing plasma chemistry for activating and subsequently modifying the surface of rigid, monodisperse particles prepared from divinylbenzene.Results: The efforts accounted for above have resulted in i) better knowledge of the etching and functionalization parameters that determine attachment of organic monoliths prepared by radical polymerization to the surface of silica; ii) polar methacrylic monoliths with a designed macroporosity that approaches the desired "connected rod" macropore morphology; iii) estab¬lishing the usefulness of monoliths prepared via nitroxide mediated polymerization in gradient polymer elution chromatography; iv) proving that scanning electron microscopy images are of limited value for assessing the macroporous properties of organic monoliths, and that pore measurements on externally polymerized monolith cocktails do not represent the porous properties of the same cocktail polymerized in narrow confinements; and v) showing that plasma bromination can be used as an activation step for rigid divinylbenzene particles to act as grafting handles for epoxy-containing telomers, that can be attached in a sufficiently dense layer and converted into carboxylate cation exchange layer that allows protein separations in fully aqueous eluents.
|
|