| 1. |
- Hosseini Bab Anari, Elham, 1982, et al.
(författare)
-
Fluorine-free salts for aqueous lithium-ion and sodium-ion battery electrolytes
- 2016
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 6:88, s. 6, 85194-85201
-
Tidskriftsartikel (refereegranskat)abstract
- A first generation of fluorine-free lithium and sodium salts based on the concept of pseudo-delocalized anions has been synthesized with both high purity and yield using water as the solvent in the reaction medium. The salts have been fully characterized by Raman and FT-IR spectroscopies, thermogravimetry, and X-ray crystallography to reveal both basic properties in terms of thermal stability and solubility as well as the local, mainly ion–ion interaction dictated, coordination details and by ionic conductivity and electrochemical stability window measurements as aqueous electrolytes. Together a picture is created of the salts' promise as components in electrolytes – primarily aiming at application in low voltage fluorinefree aqueous lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs).
|
|
| 2. |
|
|
| 3. |
- Eivazihollagh, Alireza, et al.
(författare)
-
On chelating surfactants : Molecular perspectives and application prospects
- 2019
-
Ingår i: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322 .- 1873-3166. ; 278, s. 688-705
-
Tidskriftsartikel (refereegranskat)abstract
- Chelating agents, molecules that very strongly coordinates certain metal ions, are used industrially as well as in consumer products to minimize disturbances and increase performance of reactions and applications. The widely used sequestering agents, nitrilotriacetic acid (NTA), ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA) belong to this branch of readily water-soluble compounds. When these chemical structures also have hydrophobic parts, they are prone to adsorb at air-water interfaces and to self-assemble. Such bifunctional molecules can be called chelating surfactants and will have more extended utilization prospects than common chelating agents or ordinary ionic surfactants. The present review attempts to highlight the fundamental behavior of chelating surfactants in solution and at interfaces, and their very specific interactions with metal ions. Methods to recover chelating surfactants from metal chelates are also described. Moreover, utilization of chelating surfactants in applications for metal removal in environmental engineering and mineral processing, as well as for metal control in the fields of biology, chemistry and physics, is exemplified and discussed.
|
|
| 4. |
|
|
| 5. |
- Forero Saboya, Juan, 1992, et al.
(författare)
-
Water-in-Bisalt Electrolyte with Record Salt Concentration and Widened Electrochemical Stability Window
- 2019
-
Ingår i: Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 10:17, s. 4942-4946
-
Tidskriftsartikel (refereegranskat)abstract
- Water-in-salt and water-in-bisalt electrolytes have recently attracted much attention due to their expanded electrochemical stability windows. The concentration limit of such electrolytes is constrained by the solubility of the lithium salts employed, ca. 21 m (mol kg−1) for LiTFSI (lithium bis(trifluoromethanesulfonyl)imide). By adding a second lithium salt, the total salt concentration can be increased, but the hydrogen evolution keeps limiting the application of such systems in batteries with low potential anodes. Herein we report a water-in-bisalt electrolyte with a record salt concentration (31.4 m LiTFSI + 7.9 m Li[N(CH3)2((CH2)3SO3)((CH2)4SO3)]) in which the bulky anion completely prevents the crystallization, even at such low water contents. Although the hydrogen evolution reaction is not completely suppressed, the expanded electrochemical stability window allows for low potential reactions such as aluminum−lithium alloying. The high salt concentration favors the formation of a suitable passivation layer that can be further engineered by modifying the anion structure
|
|
| 6. |
- Trigo, João Pedro, 1995, et al.
(författare)
-
Mild blanching prior to pH-shift processing of Saccharina latissima retains protein extraction yields and amino acid levels of extracts while minimizing iodine content
- 2023
-
Ingår i: Food Chemistry. - : Elsevier BV. - 0308-8146 .- 1873-7072. ; 404
-
Tidskriftsartikel (refereegranskat)abstract
- The seaweed Saccharina latissima is often blanched to lower iodine levels, however, it is not known how blanching affects protein extraction. We assessed the effect of blanching or soaking (80/45/12 °C, 2 min) on protein yield and protein extract characteristics after pH-shift processing of S. latissima. Average protein yields and extract amino acid levels ranked treatments as follows: blanching-45 °C ∼ control > soaking ∼ blanching-80 °C. Although blanching-45 °C decreased protein solubilization yield at pH 12, it increased isoelectric protein precipitation yield at pH 2 (p < 0.05). The former could be explained by a higher ratio of large peptides/proteins in the blanched biomass as shown by HP-SEC, whereas the latter by blanching-induced lowering of ionic strength, as verified by a dialysis model. Moreover, blanching-45 °C yielded a protein extract with 49 % less iodine compared with the control extract. We recommend blanching-45 °C since it is effective at removing iodine and does not compromise total protein extraction yield.
|
|
| 7. |
|
|
| 8. |
- Marra, Eva, et al.
(författare)
-
Oxygen reduction reaction kinetics on a Pt thin layer electrode in AEMFC
- 2022
-
Ingår i: Electrochimica Acta. - : Elsevier BV. - 0013-4686 .- 1873-3859. ; 435, s. 141376-141376
-
Tidskriftsartikel (refereegranskat)abstract
- The study of the catalytic activity in a fuel cell is challenging, as mass transport, gas crossover and the counterelectrode are generally interfering. In this study, a Pt electrode consisting of a thin film deposited on the gasdiffusion layer was employed to study the oxygen reduction reaction (ORR) in an operating Anion Exchange Membrane Fuel Cell (AEMFC). The 2D Pt electrode was assembled together with a conventional porous Pt/Ccounter electrode and an extra Pt/C layer and membrane to reduce the H2 crossover. Polarization curves atdifferent O2 partial pressures were recorded and the resulting reproducible ORR activities were normalized withrespect to the active surface area (ECSA), obtained by CO stripping. As expected, decreasing the O2 partialpressure results in a negative shift in open circuit voltage (OCV), cell voltage and maximum attainable currentdensity. For cell voltages above 0.8 V a fairly constant Tafel slope of 60 mV dec−1 was recorded but at lowervoltages the slope increases rapidly. The observed Tafel slope can be explained by a theoretical model with anassociative mechanism where charge- and proton-transfer steps are decoupled, and the proton transfer is the rate-determining step. A reaction order of 1 with respect to O2 was obtained at 0.65 V which corresponds well withthe mechanism suggested above. Based on the obtained catalyst activities, the electrode performance is comparable to good porous electrodes found in the field. The methodology presented in this study is expected to beuseful in future kinetic studies of other catalysts for AEMFC.
|
|
| 9. |
- Salvador, Christian Mark, 1989, et al.
(författare)
-
Indoor ozone/human chemistry and ventilation strategies
- 2019
-
Ingår i: Indoor Air. - : Hindawi Limited. - 1600-0668 .- 0905-6947. ; 29:6, s. 913-925
-
Tidskriftsartikel (refereegranskat)abstract
- This study aimed to better understand and quantify the influence of ventilation strategies on occupant-related indoor air chemistry. The oxidation of human skin oil constituents was studied in a continuously ventilated climate chamber at two air exchange rates (1 h-1 and 3 h-1 ) and two initial ozone mixing ratios (30 and 60 ppb). Additional measurements were performed to investigate the effect of intermittent ventilation ("off" followed by "on"). Soiled t-shirts were used to simulate the presence of occupants. A time-of-flight-chemical ionization mass spectrometer (ToF-CIMS) in positive mode using protonated water clusters was used to measure the oxygenated reaction products geranyl acetone, 6-methyl-5-hepten-2-one (6-MHO) and 4-oxopentanal (4-OPA). The measurement data were used in a series of mass balance models accounting for formation and removal processes. Reactions of ozone with squalene occurring on the surface of the t-shirts are mass transport limited; ventilation rate has only a small effect on this surface chemistry. Ozone-squalene reactions on the t-shirts produced gas-phase geranyl acetone, which was subsequently removed almost equally by ventilation and further reaction with ozone. About 70% of gas-phase 6-MHO was produced in surface reactions on the t-shirts, the remainder in secondary gas-phase reactions of ozone with geranyl acetone. 6-MHO was primarily removed by ventilation, while further reaction with ozone was responsible for about a third of its removal. 4-OPA was formed primarily on the surfaces of the shirts (~60%); gas-phase reactions of ozone with geranyl acetone and 6-MHO accounted for ~30% and ~10%, respectively. 4-OPA was removed entirely by ventilation. The results from the intermittent ventilation scenarios showed delayed formation of the reaction products and lower product concentrations compared to continuous ventilation.
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
- Bessman, Alexander, et al.
(författare)
-
Aging effects of AC harmonics on lithium-ion cells
- 2019
-
Ingår i: Journal of Energy Storage. - : Elsevier. - 2352-152X .- 2352-1538. ; 21, s. 741-749
-
Tidskriftsartikel (refereegranskat)abstract
- With the vehicle industry poised to take the step into the era of electric vehicles, concerns have been raised that AC harmonics arising from switching of power electronics and harmonics in electric machinery may damage the battery. In light of this, we have studied the effect of several different frequencies on the aging of 28 Ah commercial NMC/graphite prismatic lithium-ion battery cells. The tested frequencies are 1 Hz, 100 Hz, and 1 kHz, all with a peak amplitude of 21 A. Both the effect on cycled cells and calendar aged cells is tested. The cycled cells are cycled at a rate of 1C:1C, i.e., 28 A during both charging and discharging, with the exception of a period of constant voltage at the end of every charge. After running for one year, the cycled cells have completed approximately 2000 cycles. The cells are characterized periodically to follow how their capacities and power capabilities evolve. After completion of the test about 80% of the initial capacity remained and no increase in resistance was observed. No negative effect on either capacity fade or power fade is observed in this study, and no difference in aging mechanism is detected when using non-invasive electrochemical methods of post mortem investigation.
|
|
| 13. |
- Hoveskog, Maya
(författare)
-
Innovation-related Activities in a Low-tech Industry : A Study of the Electroplating and Surface Treatment Industry in Sweden
- 2011
-
Ingår i: Research on Technology, Innovation and Marketing Management 2009‐2011. - Halmstad : Högskolan i Halmstad. - 9789197507516 ; , s. 55-81
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Given the complex and interdependent nature of innovation, it is a diverse phenomenon which takes place both in high‐ and low‐tech industries. The purpose of this paper is to increase our understanding about low‐tech industries’ innovation‐related activities and the specific capabilities of the companies that influence those. To achieve this purpose this study has performed an empirical analysis of the Swedish context of the Swedish Electroplating and Surface Treatment Industry (ESTI) and the characteristics of the companies operating in it. It investigated how the companies perceived their expertise and innovative activities in comparison with their main competitors. The main types of innovation the ESTI companieshad undertaken in a three‐year period (2004–2006) were studied. The research and development (R&D) and personnel qualification improvement expenditures were explored. The study looked into collaboration and the factors which companies perceived as important in order to collaborate. Our empirical evidence shows that innovation in the ESTI is shaped notby R&D but by other determinants, such as specific and rare capabilities in, for example, processing technologies, logistics, ability to spot, evaluate and exploit external knowledge as well as their ability to establish and sustain intercompany relationships. Strong relationships and integration with customers and suppliers emerge as pivotal for the innovation‐related activities in the ESTI. Additionally, close collaboration, facilitated by a strong intermediate institution, such as the Swedish Association of Surface Treatment Companies (Svensk YtbehandlingsFörening – SYF, also shape the innovation‐related activities in the ESTI.
|
|
| 14. |
- Ström, Henrik, 1981, et al.
(författare)
-
Behaviour and stability of the two-fluid model for fine-scale simulations of bubbly flow in nuclear reactors
- 2015
-
Ingår i: International Journal of Chemical Reactor Engineering. - : Walter de Gruyter GmbH. - 1542-6580 .- 2194-5748. ; 13:4, s. 449-459
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, we formulate a simplistic two-fluid model for bubbly steam-water flow existing between fuel pins in nuclear fuel assemblies. Numerical simulations are performed in periodic 2D domains of varying sizes. The appearance of a non-uniform volume fraction field in the form of meso-scales is investigated and shown to be varying with the bubble loading and the domain size, as well as with the numerical algorithm employed. These findings highlight the difficulties involved in interpreting the occurrence of instabilities in two-fluid simulations of gas-liquid flows, where physical and unphysical instabilities are prone to be confounded. The results obtained in this work therefore contribute to a rigorous foundation in on-going efforts to derive a consistent meso-scale formulation of the traditional two-fluid model for multiphase flows in nuclear reactors.
|
|
| 15. |
- Zubritskaya, Irina, 1984, et al.
(författare)
-
Dynamically Tunable Optical Cavities with Embedded Nematic Liquid Crystalline Networks
- 2023
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 35:13
-
Tidskriftsartikel (refereegranskat)abstract
- Tunable metal–insulator–metal (MIM) Fabry–Pérot (FP) cavities that can dynamically control light enable novel sensing, imaging and display applications. However, the realization of dynamic cavities incorporating stimuli-responsive materials poses a significant engineering challenge. Current approaches rely on refractive index modulation and suffer from low dynamic tunability, high losses, and limited spectral ranges, and require liquid and hazardous materials for operation. To overcome these challenges, a new tuning mechanism employing reversible mechanical adaptations of a polymer network is proposed, and dynamic tuning of optical resonances is demonstrated. Solid-state temperature-responsive optical coatings are developed by preparing a monodomain nematic liquid crystalline network (LCN) and are incorporated between metallic mirrors to form active optical microcavities. LCN microcavities offer large, reversible and highly linear spectral tuning of FP resonances reaching wavelength-shifts up to 40 nm via thermomechanical actuation while featuring outstanding repeatability and precision over more than 100 heating–cooling cycles. This degree of tunability allows for reversible switching between the reflective and the absorbing states of the device over the entire visible and near-infrared spectral regions, reaching large changes in reflectance with modulation efficiency ΔR = 79%.
|
|
| 16. |
- Pfaff, S., et al.
(författare)
-
Combining high-energy X-ray diffraction with Surface Optical Reflectance and Planar Laser Induced Fluorescence for operando catalyst surface characterization
- 2019
-
Ingår i: Review of Scientific Instruments. - : AIP Publishing. - 0034-6748 .- 1089-7623. ; 90:3
-
Tidskriftsartikel (refereegranskat)abstract
- We have combined three techniques, High Energy Surface X-Ray Diffraction (HESXRD), Surface Optical Reflectance, and Planar Laser Induced Fluorescence in an operando study of CO oxidation over a Pd(100) catalyst. We show that these techniques provide useful new insights such as the ability to verify that the finite region being probed by techniques such as HESXRD is representative of the sample surface as a whole. The combination is also suitable to determine when changes in gas composition or surface structure and/or morphology occur and to subsequently correlate them with high temporal resolution. In the study, we confirm previous results which show that the Pd(100) surface reaches high activity before an oxide can be detected. Furthermore, we show that the single crystal catalyst surface does not behave homogeneously, which we attribute to the surface being exposed to inhomogeneous gas conditions in mass transfer limited scenarios.
|
|
| 17. |
|
|
| 18. |
- Hammarström, Thomas, 1974
(författare)
-
Evaluation of Different Waveforms to Study the Insulation Performance on Electrical Vehicle Motors
- 2022
-
Ingår i: Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP. - 0084-9162. ; 2022-November, s. 439-442
-
Konferensbidrag (refereegranskat)abstract
- The operational voltage used in electrical vehicles increases continuously and the work presented in this paper compares different waveforms to evaluate the electrical stress in the motor windings. The aim is to explore the inception and extinction voltage level for the appearance of partial discharges (PDIV & PDEV) to evaluate grade 2 motor insulations. This to find pros and cons behind different approaches such as when applying sinusoidal or square shaped waveforms. It is also discussed how much deviation in properties than can be expected for different insulation thickness. The paper shows that it is important to use a waveform which as much as possible resembles the voltage shape used in the actual application to properly evaluate the performance of the insulation system. It is also recommended to include measurements at elevated temperatures in the analysis.
|
|
| 19. |
- Jenkin, M. E., et al.
(författare)
-
The CRI v2.2 reduced degradation scheme for isoprene
- 2019
-
Ingår i: Atmospheric Environment. - : Elsevier BV. - 1873-2844 .- 1352-2310. ; 212:1 Sept., s. 172-182
-
Tidskriftsartikel (refereegranskat)abstract
- The reduced representation of isoprene degradation in the Common Representative Intermediates (CRI)mechanism has been systematically updated, using the Master Chemical Mechanism (MCM v3.3.1)as a reference benchmark, with the updated mechanism being released as CRI v2.2. The complete isoprene degradation mechanism in CRI v2.2 consists of 186 reactions of 56 closed shell and free radical species, this being an order of magnitude reduction in size compared with MCM v3.3.1. The chemistry initiated by reaction with OH radicals, NO3 radicals and ozone (O3)is treated. An overview of the updates is provided, within the context of reported kinetic and mechanistic information. The revisions mainly relate to the OH-initiated chemistry, which tends to dominate under atmospheric conditions, although these include updates to the chemistry of products that are also generated from the O3- and NO3-initiated oxidation. The revisions have impacts in a number of key areas, including recycling of HOx and NOx. The performance of the CRI v2.2 isoprene mechanism has been compared with those of the preceding version (CRI v2.1)and the reference MCM v3.3.1 over a range of relevant conditions, using a box model of the tropical forested boundary layer. In addition, tests are carried out to ensure that the performance of MCM v3.3.1 remains robust to more recently reported information. CRI v2.2 has also been implemented into the STOCHEM chemistry-transport model, with a customized close-variant of CRI v2.2 implemented into the EMEP MSC-W chemistry-transport model. The results of these studies are presented and used to illustrate the global-scale impacts of the mechanistic updates on HOx radical concentrations.
|
|
| 20. |
- Moreno-Garcia, D., et al.
(författare)
-
A Resonant Graphene NEMS Vibrometer
- 2022
-
Ingår i: Small. - : Wiley. - 1613-6810 .- 1613-6829. ; 18:28
-
Tidskriftsartikel (refereegranskat)abstract
- Measuring vibrations is essential to ensuring building structural safety and machine stability. Predictive maintenance is a central internet of things (IoT) application within the new industrial revolution, where sustainability and performance increase over time are going to be paramount. To reduce the footprint and cost of vibration sensors while improving their performance, new sensor concepts are needed. Here, double-layer graphene membranes are utilized with a suspended silicon proof demonstrating their operation as resonant vibration sensors that show outstanding performance for a given footprint and proof mass. The unveiled sensing effect is based on resonant transduction and has important implications for experimental studies involving thin nano and micro mechanical resonators that are excited by an external shaker.
|
|
| 21. |
- Ghadami Yazdi, Milad, et al.
(författare)
-
Naphthalene on Ni(111) : experimental and theoretical insights into adsorption, dehydrogenation and carbon passivation
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- An attractive solution to mitigate tars and also to decompose lighter hydrocarbons in biomass gasification is secondary catalytic reforming, converting hydrocarbons to useful permanent gases. Albeit in use for long time in fossil feedstock catalytic steam reforming, the understanding of the catalytic processes is still limited. Naphthalene is typically present in the biomass gasification gas and to further understand the elementary steps of naphthalene transformation, we investigated the temperature dependent naphthalene adsorption, dehydrogenation and passivation on Ni(111). TPD (temperature programmed desorption) and STM (scanning tunneling microscopy) in ultra-high vacuum environment from 110 K up to 780 K, combined with DFT (density functional theory) were used in the study. Room temperature adsorption results in a flat naphthalene monolayer. DFT favors the di-bridge[7] geometry but the potential energy surface is rather smooth. DFT also reveals a pronounced dearomatization and charge transfer from the adsorbed molecule into the nickel surface. Dehydrogenation occurs in two steps, with two desorption peaks at approximately 450 K and 600 K. The first step is due to partial dehydrogenation generating active hydrocarbon species that at higher temperatures migrates over the surface forming graphene. The graphene formation is accompanied by desorption of hydrogen in the high temperature TPD peak. The formation of graphene effectively passivates the surface both for hydrogen adsorption and naphthalene dissociation. In conclusion, the obtained results on the model naphthalene and Ni(111) system, provides insight into elementary steps of naphthalene adsorption, dehydrogenation and carbon passivation, which may serve as a good starting point for rational design, development and optimization of the Ni catalyst surface, as well as process conditions, for the aromatic hydrocarbon reforming process.
|
|
| 22. |
- Lindström, Stefan B, 1974-, et al.
(författare)
-
A numerical investigation of the rheology of sheared fiber suspensions
- 2009
-
Ingår i: Physics of fluids. - : AIP Publishing. - 1070-6631 .- 1089-7666. ; 21:8, s. 083301-
-
Tidskriftsartikel (refereegranskat)abstract
- Particle-level simulations are performed to study the rheology of monodispersed non-Brownian fibers suspended in a Newtonian fluid in shear flow. The effects of fiber aspect ratio, concentration, and interparticle friction on the stress tensor of the suspension in the steady state and on the tendency of fiber agglomeration are investigated. Semiempirical expressions for the steady state apparent shear viscosity and the steady state first and second normal stress difference were obtained for the case of well dispersed suspensions in the nonconcentrated regimes. The simulation predictions of the specific viscosity were in fair agreement with previous experimental investigations.
|
|
| 23. |
- Lindström, Stefan B, 1974-, et al.
(författare)
-
Simulation of semidilute suspensions of non-Brownian fibres in shear flow
- 2008
-
Ingår i: Journal of Chemical Physics. - : AIP Publishing. - 0021-9606 .- 1089-7690. ; 128:2, s. 024901-
-
Tidskriftsartikel (refereegranskat)abstract
- Particle-level simulations are performed to study semidilute suspensions of monodispersed non-Brownian fibers in shear flow, with a Newtonian fluid medium. The incompressible three-dimensional Navier-Stokes equations are used to describe the motion of the medium, while fibers are modeled as chains of fiber segments, interacting with the fluid through viscous drag forces. The two-way coupling between the solids and the fluid phase is taken into account by enforcing momentum conservation. The model includes long-range and short-range hydrodynamic fiber-fiber interactions, as well as mechanical interactions. The simulations rendered the time-dependent fiber orientation distribution, whose time average was found to agree with experimental data in the literature. The viscosity and first normal stress difference was calculated from the orientation distribution using the slender body theory of Batchelor [J. Fluid Mech. 46, 813--829 (1971)], with corrections for the finite fiber aspect ratios. The viscosity was also obtained from direct computation of the shear stresses of the suspension for comparison. These two types of predictions compared well in the semidilute regime. At higher concentrations, however, a discrepancy was seen, most likely due to mechanical interactions, which are only accounted for in the direct computation method. The simulated viscosity determined directly from shear stresses was in good agreement with experimental data found in the literature. The first normal stress difference was found to be proportional to the square of the volume concentration of fibers in the semidilute regime. As concentrations approached the concentrated regime, the first normal stress difference became proportional to volume concentration.
|
|
| 24. |
- Lindström, Stefan B, 1974-, et al.
(författare)
-
Simulation of the motion of flexible fibres in viscous fluid flow
- 2007
-
Ingår i: Physics of fluids. - : AIP Publishing. - 1070-6631 .- 1089-7666. ; 19:11, s. 113307-1-113307-16
-
Tidskriftsartikel (refereegranskat)abstract
- A model for flexible fibers in viscous fluid flow is proposed, and its predictions compared with experiments found in the literature. The incompressible three-dimensional Navier-Stokes equations are employed to describe the fluid motion, while fibers are modeled as chains of fiber segments, interacting with the fluid through viscous and dynamic drag forces. Fiber segments, from the same or from different fibers, interact with each other through normal, frictional and lubrication forces. Momentum conservation is enforced on the system to capture the two-way coupling between phases. Quantitative predictions could be made, and showed good agreement with experimental data, for the period time of Jeffery orbits in shear flow, as well as for the amount of bending of flexible fibers in shear flow. Simulations, using the proposed model, also successfully reproduced the different regimes of motion for threadlike particles, ranging from rigid fiber motion to complicated orbiting behavior, including coiling and self-entanglement.
|
|
| 25. |
- Almgren, Karin, et al.
(författare)
-
Role of fibre-fibre and fibre-matrix adhesion in stress transfer in composites made from resin-impregnated paper sheets.
- 2009
-
Ingår i: International Journal of Adhesion and Adhesives. - : Elsevier BV. - 0143-7496 .- 1879-0127. ; 29:5, s. 551-557
-
Tidskriftsartikel (refereegranskat)abstract
- Paper-reinforced plastics are gaining increased interest as packaging materials, where mechanical properties are of great importance. Strength and stress transfer in paper sheets are controlled by fibre-fibre bonds. In paper-reinforced plastics, where the sheet is impregnated with a polymer resin, other stress-transfer mechanisms may be more important. The influence of fibre-fibre bonds on the strength of paper-reinforced plastics was therefore investigated. Paper sheets with different degrees of fibre-fibre bonding were manufactured and used as reinforcement in a polymeric matrix. Image analysis tools were used to verify that the difference in the degree of fibre-fibre bonding had been preserved in the composite materials. Strength and stiffness of the composites were experimentally determined and showed no correlation to the degree of fibre-fibre bonding, in contrast to the behaviour of unimpregnated paper sheets. The degree of fibre-fibre bonding is therefore believed to have little importance in this type of material, where stress is mainly transferred through the fibre-matrix interface.
|
|
