SwePub - sökning: L773:0272 9172 OR L773:9781605...

Numrering	Referens	Omslagsbild	Hitta
1.	Samadikhah, Kaveh, 1982, et al. (författare) General elasticity theory for graphene membranes based on molecular dynamics 2007 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172. - 9781605608266 ; 1057, s. 109-114 Konferensbidrag (refereegranskat)abstract We have studied the mechanical properties of suspended graphene membranes using molecular dynamics (MD) and generalized continuum elasticity theory (GE) in order to develop and assess a continuum description for graphene. The MD simulations are based on a valence force field model which is used to determine the deformation and the elastic energy of the membrane (EMD) as a function of external forces. For the continuum description, we use the expression Econt = Estretching + Ebending for the elastic energy functional. The elastic parameters (tensile rigidity and Poisson ratio) entering Econt are determined by requiring that E cont = EMD for a set of deformations. Comparisons with the MD results show excellent agreement. We find that the elastic energy of a supported graphene sheets is typically dominated by the nonlinear stretching terms whereas a linear description is valid only for very small deflections. This implies that in some applications, i.e. NEMS, a linear description is of limited applicability.
2.	Andersson, Henrik C. M., et al. (författare) Creep testing of thick-wall copper electron beam and friction stir welds 2004 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. - 1558997741 ; 824, s. 51-56 Tidskriftsartikel (refereegranskat)abstract Thick section copper canisters are planned to be used as a corrosion protection of nuclear waste disposal containers for long term underground deposal in Sweden. The copper canisters will have the top and possibly the bottom lid welded to the canister walls using electron beam or friction stir welding. Due to the high external hydrostatic pressure and the relatively high temperature of the waste during the first one hundred years the copper will creep. The creep process will close the manufacturing gap between the cast iron container and the copper canister. The creep ductility must be sufficient to avoid cracking of the weld. Specimens cut from the friction stir welds and the electron beam welds have been creep tested at temperatures ranging from 75 to 175 degreesC. Cross-weld specimens were used for both friction stir and electron beam welds. Weld metal, heat affected zone and base metal were also studied for friction stir welds. The results for the electron beam welds show that the main creep deformation is concentrated to the weld metal where the failure takes place. Weld metal and most cross-weld tests of friction stir weld material show similar creep lives and ductility as base metal tests. Ductility at rupture was found to exceed 30% for friction stir weld specimens, and the Norton power law exponent was determined to be between 30 and 50.
3.	Bader, Thomas K., 1980-, et al. (författare) From lignin to spruce : Poromechanical upscaling of wood strength 2011 Ingår i: 2010 MRS Fall Meeting. - Warrendale, Pennsylvania, USA : Materials Research Society. - 9781605112787 ; , s. 75-80 Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract Wood strength is highly anisotropic, due to the inherent structural hierarchy of the material. In the framework of a combined random-periodic multiscale poro-micromechanics model, we here translate compositional information throughout this hierarchy into the resulting anisotropic strength at the softwood level, based on “universal” elastic properties of cellulose, hemicelluloses, and lignin, and on the shear strength of the latter elementary constituent. Therefore, derivation of the elastic energy in a piece (representative volume element – RVE) of softwood, stemming from homogeneous macroscopic strains prescribed in terms of displacements at the boundary of the RVE and from pressure exerted by water filling the nanoporous space between the hemicelluloses-lignin network within the cell walls, with respect to the shear stiffness of lignin, yields higher order strains in the lignin phase, approximating micro-stress peaks leading to local lignin failure. Relating this (quasi-brittle) failure to overall softwood failure (or strictly speaking, elastic limit of softwood) results in a macroscopic microstructure-dependent failure criterion for softwood. The latter satisfactorily predicts the biaxial strength of spruce at various loading angles with respect to the grain direction. The model also predicts the experimentally well-established fact that uniaxial tensile and compressive strengths, as well as the shear strength of wood, depend quasi-linearly on the cell water content, but highly nonlinearly on the lumen porosity.
4.	Boosalis, Alexander, et al. (författare) Spectroscopic Mapping Ellipsometry of Graphene Grown on 3C SiC 2012 Ingår i: MRS Proceedings Volume 1407. - : Springer Science and Business Media LLC. ; , s. aa20-43 Konferensbidrag (refereegranskat)abstract Spectroscopic mapping ellipsometry measurements in the visible spectrum (1.25 to 5.35 eV) are performed to determine the lateral variations of epitaxial graphene properties as grown on 3C SiC. Data taken in the visible spectrum is sensitive to both the Drude absorption of free charge carriers and the characteristic exciton enhanced van Hove singularity at 5 eV. Subsequent analysis with simple oscillator models allows the determination of physical parameters such as free charge carrier scattering time and local graphene thickness with a lateral resolution of 50 microns.
5.	Butorin, S. M., et al. (författare) Resonant inelastic soft X-ray scattering studies of U(VI) reduction on iron surfaces 2004 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 807:Scientific Basis for Nuclear Waste Management XXVII, s. 113-118 Tidskriftsartikel (refereegranskat)abstract The authors report on the spectroscopic anal. of several samples relevant to the processes governing the behavior of oxidized U species in groundwater solns. under anoxic conditions. Both Fe samples with different times of exposure to the U(IV) soln. and Fe metal-soln. interfaces in the liq. cell ex-situ and in-situ, resp. Resonant inelastic soft x-ray scattering is sensitive to the chem. state of U. The measurements were performed at a no. of energies of the primary photon beam across the U 5d absorption edge. The results unambiguously indicate the redn. of U(VI) to U(IV) on the Fe surface. [on SciFinder(R)]
6.	Cui, Daqing, et al. (författare) Surface mediated processes in the interaction of spent fuel α-doped UO2 with H2 2008 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172. - 9781605110745 ; 1104, s. 87-99 Konferensbidrag (refereegranskat)abstract In most deep disposal concepts, large amounts of hydrogen are expected to be produced by the anoxic corrosion of massive iron containers. At repository temperatures, hydrogen is quite inert and is not expected to contribute to the redox capacity of the deep groundwaters. In several recent works, a large impact of dissolved hydrogen on the dissolution of the LWR or MOX fuel and UO 2(s) doped with 233U or 238Pu has been observed. For hydrogen concentrations above a certain limit, the dissolution rates of these highly radioactive materials drop to very low values. A discussion of the results obtained with spent fuel or ?-doped UO 2 in the presence of a range of hydrogen concentrations is presented. Typical for all measurements under such conditions are the very low long term concentrations of uranium and other redox-sensitive radionuclides, such as Tc and the minor actinides. The concentrations of U are systematically lower than the values measured during UO2(s) solubility measurements carried out in the presence of strong reducing agents. Measurements of the radiolytic oxygen after long leaching periods result in values below detection limit. The investigation of the surface of spent fuel or UO2(s) pellets doped with 233U by XPS after long periods of testing shows absence of oxidation. The kinetics of the release of non-redox sensitive elements such as Sr and Cs, used to estimate fuel matrix dissolution rates, is also discussed. An attempt is made to propose potential mechanisms responsible for the observed behaviour, based mainly on data from studies on the interaction of water adsorbed on the surfaces of metal oxides or actinide oxides with radiation. Another important effect observed in recent studies is the existence of a threshold for the specific alpha activity below which no measurable influence of the alpha radiolysis on the uranium release from UO2 is observed. The importance of such a threshold for the behaviour of spent fuel under repository conditions encompassing very long time scales will be discussed, as well as the necessity to better investigate the mechanisms of recombination reactions in a thin water layer on the surface of actinide oxides affected by ?- radiolysis.
7.	Di Luccio, Tiziana, et al. (författare) Synthesis of CdS nanocrystals in polymeric films studied by in-situ GID and GISAXS 2015 Ingår i: Insights for Energy Materials Using In-Situ Charaterization. - : Springer Science and Business Media LLC. - 0272-9172. - 9781510826625 ; 1810, s. 9-14 Konferensbidrag (refereegranskat)abstract In this work, we describe the synthesis of CdS nanocrystals in thin polymeric films by in-situ Grazing Incidence Diffraction (GID) and Grazing Incidence Small Angle Scattering (GISAXS). The 2D GISAXS patterns indicate how the precursor structure is altered as the temperature is varied from 25°C to 300°C. At 150°C, the CdS nanocrystals start to arrange themselves in a hexagonal lattice with a lattice parameter of 27 A. The diffraction intensity from the hexagonal lattice reaches a maximum at 170"C and decreases steadily upon further heating above 220°C indicating loss of symmetry. Correspondingly, the GID scans at 170°C show strong crystalline peaks from cubic CdS nanocrystals that are about 2 nm size. The results indicate that a temperature of 170°C is sufficient to synthesize CdS nanocrystals without degradation of the polymer matrix (Topas) in thin films (about 30nm).
8.	El Daif, O., et al. (författare) Silver nanodiscs for light scattering in thin epitaxial silicon solar cells: Influence of the disc radius 2011 Ingår i: Materials Research Society Symposium Proceedings. - : Springer Science and Business Media LLC. - 0272-9172. - 9781627482110 ; 1391, s. 75-80 Konferensbidrag (refereegranskat)abstract The effect of silver nanoparticles showing localised plasmonic resonances on the efficiency of thin film silicon solar cells is studied. Silver (Ag) nanodiscs were deposited on the surface of silicon cells grown on highly doped silicon substrates, through hole-mask colloidal lithography, which is a low-cost and bottom-up technique. The cells have no back reflector in order to exclusively study the effect of the front surface on their properties. Cells with nanoparticles were compared with both bare silicon cells and cells with an antireflection coating. We optically observe a resonance showing an absorption increase controllable by the disc radius. We also see an increase in efficiency with respect to bare cells, but we see a decrease in efficiency with respect to cells with an antireflection coating due to losses at wavelengths below the plasmon resonance. As the material properties are not notably affected by the particles deposition, the loss mechanism is an important absorption in the nanoparticles. We confirm this by numerical simulations.
9.	Ericsson, Torsten, 1938-, et al. (författare) Studies of residual stress, microcracks, hardness and microstructure of cold compacted metallic green bodies 2003 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 759, s. 53-64 Tidskriftsartikel (refereegranskat)abstract The residual stresses have been measured by X-ray and neutron diffraction on PM green bodies manufactured by conventional and high speed compaction of iron powder with and without added copper and brass powder. Compressive residual stresses are present in a thin layer in both top and side surfaces. They are largest in the side surfaces due to plastic deformation of the surface material caused by the friction forces during ejection out of the die. In the interior of the green body residual stresses exist with certain region under compression (periferical regions) and other under tension (more central regions). It is unclear whether mixing iron powder with brass or copper powder leads to considerable phase stresses between the two phases.
10.	Fang, Mei, 1984-, et al. (författare) Room temperature ferromagnetism of Fe-doped ZnO and MgO thin films prepared by ink-jet printing 2012 Ingår i: MRS Proceedings. - : Springer Science and Business Media LLC. - 0272-9172 .- 1946-4274. Konferensbidrag (refereegranskat)abstract Room temperature magnetic properties of un-doped, as well as 10 at.% Fe-doped ZnOand MgO single-pass layer of ink-jet printed thin films have been investigated to obtain insightinto the role of the band gaps and mechanisms for the origin of ferromagnetic order in thesematerials. It is found that on doping with Fe, the saturation magnetization is enhanced by severalfoldin both systems when compared with the respective un-doped thin films. For a ~28 nm thickfilm of Fe-doped ZnO (Diluted Magnetic Semiconductor, DMS) we observe an enhancedmoment of 0.465 μB/Fe atom while it is around 0.111μB/Fe atom for the doped MgO (DilutedMagnetic Insulator, DMI) film of comparable thickness. Also, the pure ZnO is far moreferromagnetic than pure MgO at comparable low film thicknesses which can be attributed todefect induced magnetism originating from cat-ion vacancies. However, the film thicknessdependence of the magnetization and the defect concentrations are found to be significantlydifferent in the two systems so that a comparison of the magnetism becomes more complex forthicker films.
11.	Fornara, Andrea, 1980-, et al. (författare) Polymeric/inorganic multifunctional nanoparticles for simultaneous drug delivery and visualization 2010 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 1257 Tidskriftsartikel (refereegranskat)abstract Nanoparticles consisting of different biocompatible materials are attracting a lot of interest in the biomedical area as useful tools for drug delivery, photo-therapy and contrast enhancement agents in MRI, fluorescence and confocal microscopy. This work mainly focuses on the synthesis of polymeric/inorganic multifunctional nanoparticles (PIMN) based on biocompatible di-block copolymer poly(L,L-lactide-co-ethylene glycol) (PLLA-PEG) via an emulsion-evaporation method. Besides containing a hydrophobic drug (Indomethacin), these polymeric nanoparticles incorporate different visualization agents such as superparamagnetic iron oxide nanoparticles (SPION) and fluorescent Quantum Dots (QDs) that are used as contrast agents for Magnetic Resonance Imaging (MRI) and fluorescence microscopy together. Gold Nanorods are also incorporated in such nanostructures to allow simultaneous visualization and photodynamic therapy. MRI studies are performed with different loading of SPION into PIMN, showing an enhancement in T2 contrast superior to commercial contrast agents. Core-shell QDs absorption and emission spectra are recorded before and after their loading into PIMN. With these polymeric/inorganic multifunctional nanoparticles, both MRI visualization and confocal fluorescence microscopy studies can be performed. Gold nanorods are also synthesized and incorporated into PIMN without changing their longitudinal absorption peak usable for lased excitation and phototherapy. In-vitro cytotoxicity studies have also been performed to confirm the low cytotoxicity of PIMN for further in-vivo studies.
12.	Gong, Karin Anne Xia, 1965, et al. (författare) Toughening Effect and Oxidation Behavior of MoSi2-ZrO2 Composites 2007 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172. ; 980, s. 339-344 Tidskriftsartikel (refereegranskat)abstract Toughening effect of ZrO2-particles on MoSi2-based materials is one of the important toughening mechanisms. In this work, the influence of particle size and volume percentage of unstabilized ZrO2-addition on toughening in MoSi2-matrix composites was studied. The measured data revealed that the fine particle size,
13.	Granqvist, C.-G. 1946-, et al. (författare) Electrochromics and Thermochromics for Energy Efficient Fenestration: New Applications Based on Transparent Conducting Nanoparticles 2013 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 1558, s. 12 p.-, s. 1-12 Tidskriftsartikel (refereegranskat)
14.	Granqvist, C.-G. 1946-, et al. (författare) Oxide-based electrochromics: Advances in materials and devices 2011 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 1328, s. 11-22 Tidskriftsartikel (refereegranskat)
15.	Granqvist, C.-G. 1946-, et al. (författare) Progress in chromogenic materials and devices: New data on electrochromics and thermochromics 2013 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 1492, s. 99-110 Tidskriftsartikel (refereegranskat)
16.	Hassanzadeh, Manouchehr, et al. (författare) Fracture Mechanical Properties of Rocks and Mortar/Rock Interfaces 1994 Ingår i: Microstructure of cement-based systems/bonding and interfaces in cementitious materials / Materials Research Society Symposia Proceedings. - 0272-9172. - 1558992723 ; 370, s. 377-386 Konferensbidrag (refereegranskat)abstract This study has determined the fracture mechanical properties of 9 types of rock, namely fine-, medium- and coarse-grained granites, gneiss, quartzite, diabase, gabbro, and fine- and coarse-grained limestones. Test results show among other things that quartzite has the highest compressive strength and fracture energy, while diabase has the highest splitting tensile strength and modulus of elasticity. Furthermore, the strength and fracture energy of the interfacial zone between the rocks and 6 different mortars have been determined. The results showed that, in this investigation, the mortar/rock interfaces are in most cases weaker than both mortars and rocks.
17.	Hedenblad, Göran (författare) Moisture permeability of mature concrete and cement paste 1994 Ingår i: Microstructure of Cement-Based Systems / Bonding and Interfaces in Cementitious Materials - MRS Symposium - Proceedings, v 370. - 0272-9172. - 1558992723 ; , s. 443-448 Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract Moisture permeabilities (δv) of mature concrete and cement paste with water-cement ratio (w0/C) 0.4, 0.5 and 0.6 have been determined as functions of the relative humidity (RH). These δv can be used to calculate δv of the aggregates including the interfacial transition zone (ITZ). δv of granite has been preliminarily determined as a function of RH.
18.	Isheden, Christian, et al. (författare) Formation of Ni mono-germanosilicide on heavily B-doped epitaxial SiGe for ultra-shallow source/drain contacts 2003 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 745, s. 117-122 Tidskriftsartikel (refereegranskat)abstract The formation of Ni germanosilicides during solid-state interaction between Ni and heavily B-doped strained epitaxial Si1-xGex films with x=0.18, 0.32 and 0.37 is studied. No NiSi2 is found in these samples even after annealing at 850 degreesC, which can be compared to the formation of NiSi2 at 750 T on Si(I 00). Resistance and diffraction studies for the Si0.82Ge0.18 sample indicate that NiSi0.82Ge0.18 forms and the NiSi0.82Ge0.18/Si0.82Ge0.18 structure is stable from 400 to 700 degreesC. For the NiSi1-uGeu formed in all Si1-xGex samples, where u can be different from x, a strong film texturing is observed. When the Ge fraction is increased from 18 at.% to 32-37 at.%, the morphological stability of the film is degraded and a substantial increase in sheet resistance occurs already at 600 degreesC. The contact resistivity for the NiSi0.8Ge0.2/Si0.8Ge0.2 interface formed at 550 T is determined as 1.2x10(-7) Omegacm(2), which satisfies the ITRS contact resistivity requirement for the 70 nm technology node.
19.	Johansson, Å. A., et al. (författare) Intrinsic, n- and p-doped a-Si:H thin films grown by DC magnetron sputtering with doped targets 1999 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 557, s. 31-36 Tidskriftsartikel (refereegranskat)abstract Intrinsic, n- and p-type a-Si:H films were deposited by dc magnetron sputtering and analyzed with several techniques. The films were synthesized in a reactive Ar-Ha atmosphere giving H contents in the range of 3-20 at %. The films were sputtered from pure silicon targets and doped silicon targets with 1 at % B or P. Doping by co-sputtering from composite Si/B4C targets was also explored. The doping concentrations were 3 × 1020 - 2 × 1021 cm-3 for the p-type films and 2.6-2.9 × 1019cm-3 for the n-type films. The conductivity was in the range lO'MO"4 cm-1 for p-doped films and 10-5 Cl cm-1 for the best n-doped films. Band gap estimations were obtained from dielectric function data and showed an increase with hydrogen content. A comparison to device quality PECVD-samples was also made.
20.	Jonsson, Mats, et al. (författare) Dissolution of UO2 by one- and two-electron oxidants 2004 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 807, s. 77-82 Tidskriftsartikel (refereegranskat)abstract In this work, the efficiency of one- and two-electron oxidants in oxidative dissolution Of UO2 has been investigated. This was accomplished by measuring the U(VI)-concentration in solution after exposing UO2-powder to controlled amounts of oxidants in aqueous solution. The oxidants used in this study are H2O2, IrCl62-, CO3.- and OH..H2O2 acts as a two-electron oxidant while the remaining three oxidants are one-electron oxidants. CO3.- and OH. were generated using gamma-radiolysis. The results clearly show that the dissolution yields for one-electron oxidants (per electron pair) are lower than the yields for two-electron oxidants. Furthermore, the yields for one-electron oxidants increase with increasing amount of oxidant (especially at low amounts of oxidant). The rationale for this is that U(VI) is the main soluble species which is formed directly upon two-electron oxidation. For one-electron oxidants the primary oxidation product is U(V) which can form U(VI) upon reaction with a second oxidant. The probability for a second oxidation is however low at low concentrations of oxidant.
21.	Juhasz, Robert, et al. (författare) Size reduction of silicon nanopillars by photo-electrochemical etching 2001 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 638, s. F851-F855 Tidskriftsartikel (refereegranskat)abstract Silicon nanopillars, formed by electron beam lithography, were electrochemically etched to provide controlled size reduction. The smallest dimensions achieved were pillars of 15 nm in diameter, restricted mainly by the scanning electron microscope used for characterization. The etch rate was mainly determined by the photogeneration of carriers, by the HF concentration and by the applied voltage bias. The applied bias also controlled the resulting shape of the pillars such that a high bias resulted in etching of the pillar top whereas a negative bias caused etching only at the pillar base. For 0 V, a relatively conform etching of the pillar was observed. We discuss these phenomena in terms of electropolishing or pore formation effects on a local scale.
22.	Kalaboukhov, Alexei, 1975, et al. (författare) Electrical and structural properties of ABO3/SrTiO3 interfaces 2012 Ingår i: Materials Research Society Symposium Proceedings. - Warrendale, Pa. : Springer Science and Business Media LLC. - 0272-9172. - 9781605114316 ; 1454, s. 167-172, s. 167-172 Konferensbidrag (refereegranskat)abstract Electrical transport and microstructure of interfaces between nm-thick films of various perovskite oxides grown by pulsed laser deposition (PLD) on TiO2 terminated SrTiO3 (STO) substrates are compared. LaAlO3/STO and KTaO3/STO interfaces become quasi-2DEG after a critical film thickness of 4 unit cell layers. The conductivity survives long anneals in oxygen atmosphere. LaMnO3/STO interfaces remain insulating for all film thicknesses and NdGaO3/STO interfaces are conducting but the conductivity is eliminated after oxygen annealing. Medium-energy ion spectroscopy and scanning transmission electron microscopy detect cationic intermixing within several atomic layers from the interface in all studied interfaces. Our results indicate that the electrical reconstruction in the polar oxide interfaces is a complex combination of different mechanisms, and oxygen vacancies play an important role.
23.	Khartsev, Sergiy, et al. (författare) Thin PZT film pressure microsensor 2001 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 666, s. F8121-F8126 Tidskriftsartikel (refereegranskat)abstract We report on a ferroelectric film pressure sensor fabricated on the top of 4 mm long and 1.4 mm in diameter Pt80Ir20 (PtIr) rod-shaped tip. It consists of a PZT(0.5 μm)/LSMO(0.1 μm) film heterostructure, deposited by pulsed laser ablation of stoichiometric ceramic targets PbZr0.52Ti0.48O3 and La0.67Sr0.33MnO3, and a circular, ∅ = 1.2 mm, Au electrode on the top of the PZT film. The Au/PZT/LSMO/PtIr thin-film capacitor demonstrates good ferroelectric properties: dielectric constant of 762 and loss tanδ =0.008 @ 5 kHz, induced polarization as high as 32 μC/cm2 at electric field of 250 kV/cm. Piezoelectric test, performed in a hydrostatic pressure chamber, exhibits the piezoelectric constant to be as high as 67 pC/N. This is 20% higher than 56 pC/N shown by a polarized bulk PZT sensor fabricated from the ceramics used as the target in the pulsed laser deposition process. Such an increase of the piezoelectric constant we attribute to the preferential (001) orientation of the PZT film grown on the PtIr bulk substrate. The resolution of the thin PZT film pressure microsensor was found to be about 1 mbar.
24.	Kirstein, Oliver (författare) The European spallation source and future opportunities for materials science 2015 Ingår i: State-of-the-Art Developments in Materials Characterization. - : Springer Science and Business Media LLC. - 9781605117317 ; 1754, s. 111-122 Konferensbidrag (refereegranskat)abstract The European Spallation Source is Europe's next generation high-power neutron source utilising a linear accelerator and a rotating tungsten target to produce neutrons that will be used for fundamental research and industrial applications. The facility is co-hosted by the states of Denmark and Sweden, and while the main site will be placed in Lund, Sweden, the Data Management and Software Centre will be located in Copenhagen, Denmark. The facility will cover a broad range of scientific applications in the fields of physics, chemistry, biology, or life sciences. A focus will also be materials science and engineering, and dedicated instruments will gradually become available to the user community once neutrons will be produced neutrons from 2019 onwards.
25.	Kleimann, Pascal, et al. (författare) A New Way to Form Three-Dimensional Microstructures by Electrochemical Etching of Silicon 2001 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 638, s. F821-F826 Tidskriftsartikel (refereegranskat)abstract A new technique of bulk micromachining using anodic etching of (100)-oriented n-type silicon is presented. For particular conditions the transition regime between porous silicon formation and electropolishing enables the formation of high aspect ratio microtips which correspond to inverted macropore structures. This unusual property can be explained by the distortion of currant lines near the basis of formed structures. The distortion, which prevents the tip dissolution, is due to the electrical field in the space charge region at the silicon-electrolyte interface. The same property can be used to form three-dimensional microstructures. The position and shape of the structures can be defined by forming steps of a few microns depth, prior to the electrochemical etching. Then the etching parameters (HF concentration, light intensity, etching current density) are adjusted in order to electropolish the sample except where vertical walls are needed. This enables to form microstructures without a periodic pattern. The feasibility of this technique is demonstrated by forming 100 μm wide pores, free-standing beams as well as high aspect ratio micro-needles and micro-tubes.
26.	Kovi, Kiran Kumar, 1980-, et al. (författare) Charge Transport Phenomena Unique to Diamond 2014 Ingår i: MRS Online Proceedings Library. - : Cambridge Journals Online. ; 1591, s. null-null Tidskriftsartikel (refereegranskat)abstract ABSTRACT Diamond is a unique material in many respects. One of the most well-known extreme properties of diamond is its ultrahardness. This property of diamond actually turns out to have interesting consequences for charge transport, in particular at low temperatures. In fact, the strong covalent bonds that give rise to the ultrahardness results in a lack of short wavelength lattice vibrations which has a strong impact on both electron and hole scattering. In some sense diamond behaves more like a vacuum than other semiconductor materials. In this paper we describe some interesting charge transport properties of diamond and discuss possible novel electronic applications.
27.	Kriegner, Dominik, et al. (författare) Determination of the wurtzite content and orientation distribution of nanowire ensembles 2010 Ingår i: Materials Research Society Symposia Proceedings. - 0272-9172. ; 1206, s. 11-39 Konferensbidrag (övrigt vetenskapligt/konstnärligt)
28.	Kumar Kovi, Kiran, et al. (författare) Time-of-Flight Characterization of Single-crystalline CVD Diamond with Different Surface Passivation Layers 2011 Ingår i: MRS Proceedings. - : Cambridge University Press. - 1946-4274 .- 0272-9172. ; 1282:mrsf10-1282-a09-01 Tidskriftsartikel (refereegranskat)abstract The electronic properties of diamond, e.g. a high band-gap and high carrier mobilities, together with material properties such as a very high thermal conductivity, chemical inertness and a high radiation resistance makes diamond a unique material for many extreme electronic applications out of reach for silicon devices. This includes, e.g. microwave power devices, power devices and high temperature electronics. It is important to have an effective passivation of the surface of such devices since the passivation determines the ability of the device to withstand high surface electric fields. In addition, the passivation is used to control the surface charge which can strongly influence the electric field in the bulk of the device. It is possible to measure sample parameters such as electron and hole drift mobilities, charge carrier lifetimes or saturation velocities using Time-of-flight (ToF) method. The ToF technique has also been adapted for probing the electric field distribution and the distribution of trapped charge. In this paper we present new data from lateral ToF studies of high-purity single crystalline diamond with different surface passivations. Silicon oxide and silicon nitride are used as passivation layers in the current study. The effect of the passivation on charge transport is studied, and the results of different passivation materials are compared experimentally.
29.	Landström, Ove, et al. (författare) A Comparison of In Situ Radionuclide Migration Studies in the Studsvik Area and Laboratory Measurements 1982 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172. - 0444007253 ; 5:Spec. issue, s. 697-706 Konferensbidrag (refereegranskat)
30.	Larsen, Jes K, et al. (författare) Formation of Ga2O3 barrier layer in Cu (InGa) Se2 superstrate devices with ZnO buffer layer 2013 Ingår i: MRS Proceedings. - : Springer Science and Business Media LLC. - 0272-9172 .- 1946-4274. ; 1538, s. 67-72 Tidskriftsartikel (refereegranskat)abstract The junction formation when Cu(InGa)Se2 is deposited onto ZnO in a superstrate configuration (glass/window/buffer/Cu(InGa)Se2/contact) is investigated by x-ray photoelectron spectroscopy and analysis of device behavior. When Cu(InGa)Se2 is deposited on ZnO, a Ga2O3 layer is formed at the interface. Approaches to avoid the formation of this unfavorable interlayer are investigated. This includes modifications of the process to reduce the thermal load during deposition and improvement of the thermal stability of the ZnO buffer layer. It was demonstrated that both lowering of the substrate deposition temperature and deposition of the ZnO buffer layer at elevated temperature limits the Ga2O3 formation. The presence of Ga2O3 at the junction does affect the device behavior, resulting in a kink in JV curves measured under illumination. This behavior is absent in devices with limited Ga2O3 formation.
31.	Li, Shanghua, et al. (författare) Fabrication of transparent polymer-inorganic hybrid material 2005 Ingår i: Materials Research Society Symposium Proceedings. - : Springer Science and Business Media LLC. - 9781558998308 ; , s. 190-194 Konferensbidrag (refereegranskat)abstract Polymer-inorganic hybrid materials composed of polymethyl methacrylate (PMMA) and zinc compounds were prepared by sol-gel in-situ transition polymerization of zinc complex in PMMA matrix. Zinc acetate dihydrate dissolved in ethanol was used as the inorganic precursor. Monoethanolamine (MEA) acted as a complexing agent to control the hydrolysis of zinc acetate to produce a zinc compound network, and then PMMA, formed in-situ through a radical polymerization, were chemically bonded to the forming zinc compound network to realize a hybrid material. Transparent homogenous hybrid materials with slight colours from pink to yellow were fabricated by varying the composition. TEM, FT-IR were employed to investigate structural and physical properties. The UV-shielding effect was evaluated by UV-VIS. The low content of zinc (around 0.02 wt%) and the fine particle size rendered it visibly transparent and capable of greatly attenuating UV radiation in the full UV range.
32.	Li, Yunguo, et al. (författare) Electronic structures and optical properties of cuprous oxide and hydroxide 2014 Ingår i: Materials Research Society Symposium Proceedings. - : Springer Science and Business Media LLC. - 0272-9172 .- 1946-4274. ; 1675, s. 185-190 Tidskriftsartikel (refereegranskat)abstract The broad range of applications of copper, including areas such as electronics, fuel cells, and spent nuclear fuel disposal, require accurate description of the physical and chemical properties of copper compounds. Within some of these applications, cuprous hydroxide is a compound whose relevance has been recently discovered. Its existence in the solid-state form was recently reported. Experimental determination of its physical-chemical properties is challenging due to its instability and poop crystallinity. Within the framework of density functional theory calculations (DFT), we investigated the nature of bonding, electronic spectra, and optical properties of the cuprous oxide and cuprous hydroxide. It is found that the hybrid functional PBEO can accurately describe the electronic structure and optical properties of these two copper(I) compounds. The calculated properties of cuprous oxide are in good agreement with the experimental data and other theoretical results. The structure of cuprous hydroxide can be deduced from that of cuprous oxide by substituting half Cu∗ in Cu2O lattice with protons. Compared to CU2O, the presence of hydrogen in CuOH has little effect on the ionic nature of Cu-O bonding, but lowers the energy levels of the occupied states. Thus, CuOH is calculated to have a wider indirect band gap of 2.73 eV compared with the Cu2O band gap of 2.17 eV.
33.	Mahani, Mohammad Reza, et al. (författare) Theoretical studies of single magnetic impurities on the surface of semiconductors and topological insulators 2013 Ingår i: MRS Online Proceedings Library/Volume 1564/2013. - : Materials Research Society. Konferensbidrag (refereegranskat)abstract We present results of theoretical studies of transition metal dopants in GaAs, based on microscopic tight-binding model and ab-initio calculations. We focus in particular on how the vicinity of surface affects the properties of the hole-acceptor state, its magnetic anisotropy and its magnetic coupling to the magnetic dopant. In agreement with STM experiments, Mn substitutional dopants on the (110) GaAs surface give rise to a deep acceptor state, whose wavefunction is localized around the Mn center. We discuss a refinement of the theory that introduces explicitly the d-levels for the TM dopant. The explicit inclusion of d-levels is particularly important for addressing recent STM experiments on substitutional Fe in GaAs. In the second part of the paper we discuss an analogous investigation of single dopants in Bi2Se3 three-dimensional topological insulators, focusing in particular on how substitutional impurities positioned on the surface affect the electronic structure in the gap. We present explicit results for BiSe antisite defects and compare with STM experiments.
34.	Malm, Gunnar B., et al. (författare) Micromechanical Process Integration and Material Optimization for High Performance Silicon-Germanium Bolometers 2012 Ingår i: 2012 MRS Spring Meeting - Symposium L – Group IV Photonics for Sensing and Imaging. - : Materials Research Society. Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract Semiconductor-based thermistors are very attractive sensor materials for uncooled thermal infrared (IR) bolometers. Very large scale heterogeneous integration of MEMS is an emerging technology that allows the integration of epitaxially grown, high-performance IR bolometer thermistor materials with pre-processed CMOS-based integrated circuits for the sensor read-out. Thermistor materials based on alternating silicon (Si) and silicon-germanium (SiGe) epitaxial layers have been demonstrated and their performance is continuously increasing. Compared to a single layer of silicon or SiGe, the temperature coefficient of resistance (TCR) can be strongly enhanced to about 3 %/K, by using thin alternating layers. In this paper we report on the optimization of alternating Si/SiGe layers by advanced physically based simulations, including quantum mechanical corrections. Our simulation framework provides reliable predictions for a wide range of SiGe layer compositions, including concentration gradients. Finally, our SiGe thermistor layers have been evaluated in terms of low-frequency noise performance, in order to optimize the bolometer detectivity.
35.	Marrocchelli, Dario, et al. (författare) Conduction and disorder in Y3NbO7 - Zr2Y2O7 2009 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172. - 9781605110981 ; 126, s. 71-78 Konferensbidrag (refereegranskat)abstract The construction of interaction potentials for the Y0.5+0.25xNb0.25xZr0.5-0.5xO1.75 system, on a purely ab-initio basis, is described. These potentials accurately reproduce experimental data on both the structure and the dynamics of these systems; the computer simulations also reproduce the experimental trend of the conductivity, which decreases as x increases, and of the level of static disorder within the O2- sublattice, which increases with x. A detailed analysis of these phenomena shows that the static disorder in Y3NbO7 is caused by the high Nb5+ charge and that in this material the conduction is heterogeneous, i.e. some anions are completely immobile while some others are very mobile. The role of the cation sublattice is explained in detail.
36.	Masood, Ansar, et al. (författare) Fabrication and tuning soft magnetic and magneto-optical properties of BMGs based Fe-B-Nb-Ni transparent thin films, obtained by Pulsed Laser Deposition 2014 Ingår i: International Journal of Astrobiology. - : Springer Nature. - 1473-5504 .- 1475-3006. ; 1649:4 Tidskriftsartikel (refereegranskat)abstract We have fabricated by pulse laser deposition very thin (∼5-7 nm) and thick (∼27-408 nm) films of composition Fe66B24Nb4Ni6 on silicon and quartz substrates respectively, and studied their magnetic and magneto-optic properties at room temperature. We find that the thicker films on silicon can be tuned by appropriate thermal annealing to exploit soft magnetic characteristics with low HC, and high MS values. The magnetic hysteretic loops of the as-deposited thicker films on silicon substrates show two interesting characteristics: 1) increase in the coercivity with the film thickness and 2) the onset of a two stage process during the approach to magnetic saturation. The initial in-plane characteristic of the hysteresis loop is followed by a linear anisotropic behavior between remanence and saturation- that changes into square soft-magnetic loops on decreasing the film thickness. By suitable annealing the intrinsic strain disappears at relatively low temperatures (≤200°C); the thicker films can be tailored to exhibit a simple soft-magnetic square loop with low HC. The ∼5-7 nm films deposited on glass are transparent and have been investigated for their magneto-optic properties using Faraday rotation (FR) measurement technique. Very high values of FR in the range 4-20 deg/μm almost linearly dependent on the wavelength of light in the range 405-611 nm are observed. The observed high values of Faraday rotation over a wide range of wavelength of light are useful for the applications as magneto-optic sensors in the UV to visible range.
37.	Masood, Ansar, 1983-, et al. (författare) The effect of Ni-substitution on physical Properties of Fe72-xB24Nb4Nix Bulk Metallic Glassy Alloys 2011 Ingår i: MRS Proceedings, Volume 1300, 2011. - : Materials Research Society. Konferensbidrag (refereegranskat)abstract We have succeeded in producing bulk metallic glass by partial substitution of Fe with Ni in Fe-B-Nb alloys which could otherwise be only melt spun into amorphous ribbons. Substitution by Ni in the Fe72-xB24Nb4Nix alloys with (x ~2, 4, 6, 8, 10, 12 and 14) improves the glass forming ability of the materials and as a result rods of same compositions can be fabricated. Magnetically the BMG alloys remain soft with coercivity below 500mOe. However, the electrical resistivity of the system decreases significantly by as much as a factor of two with the increase of Ni concentration, and becomes more metallic like with a positive temperature coefficient.
38.	Mikhaylov, Aleksey I., et al. (författare) Alternative method of interface traps passivation by introducing of thin silicon nitride layer at 4H-SiC/SiO2 interface 2014 Ingår i: Materials Research Society Symposium Proceedings. - : Springer Science and Business Media LLC. Konferensbidrag (refereegranskat)abstract An alternative approach for reduction of interface traps density at 4H-SiC/SiO2 interface is proposed. Silicon nitride / silicon oxide stack was deposited on p-type 4H-SiC (0001) epilayers and subsequently over-oxidized. The electrical characterization of the interface was done by employing metal-oxide semiconductor (MOS) devices, inversion-channel MOS devices and lateral MOS field effect transistors (MOSFETs).
39.	Miranda Pérez, A. F., et al. (författare) Sigma phase precipitation on welded SAF 2205 Duplex Stainless Steels after isothermal heat treatment 2014 Ingår i: Materials Research Society Symposium Proceedings. - : Cambridge University Press (CUP). ; , s. 177-182 Konferensbidrag (refereegranskat)abstract Duplex stainless steels are commonly used for various applications owing to their superior corrosion resistance and/or strength. They have ferromagnetic behavior together with a good thermal conductivity and a lower thermal expansion as a result of higher ferrite content than austenitic steels. Their ferrite matrix suffers a decomposition process during aging in the temperature range 650-950°C producing precipitation of austenite, σ and x, carbides and nitrides. These intermetallic phases are known to be deleterious for corrosion resistance and mechanical properties. In this work the effect of aging time during isothermal treatment at 850°C and 900°C on the microstructure of SAF 2205 Duplex Stainless Steels welded plates has been investigated. The aim of this work is to determine the morphology of σ phase, and perform a quantitative analysis of the precipitation process Submerged Arc Welding is used for processing. It produces a high content of δ ferrite in the heat affected zone and low content of austenite in the weld. Microstructural examination shows that the σ phase precipitates at δ ferrite/γ interphases. Longer aging treatments give rise to an increase of volume fraction together with a coarser morphology.
40.	Nikkam, Nader, et al. (författare) Experimental investigation on thermophysical properties of ethylene glycol based copper micro- and nanofluids for heat transfer applications 2015 Ingår i: Materials Research Society Symposium Proceedings. - : Cambridge University Press. - 9781510826342 ; , s. 69-74 Konferensbidrag (refereegranskat)abstract The present work reports on the fabrication, experimental and theoretical investigatbn of thermal conductivity (TC) and viscosity of ethylene glycol (EG) based nanofluids/microfluids (NFs/MFs) containing copper nanoparticles (Cu NPs) and copper microparticles (Cu MPs). Cu NPs (20-40 nm) and Cu MPs (0.5-1.5 μm) were dispersed in EG with particle concentration from 1 wt% to 3 wt% using powerful ultrasonic agitation, and to study the real impact of dispersed particles the use of surface modifier was avoided. The objectives were to study the effect of concentration and impact of size of Cu particles on thermo-physical properties, including thermal TC and viscosity, of EG based Cu NFs/MFs. The physicochemical properties of NPs/MPs and NFs/MFs were characterized by using various techniques. The experimental results exhibited higher TC of NFs and MFs than the EG base liquid. Moreover, Cu NFs displayed higher TC than MFs showing their potential for use in some heat transfer applications. Maxwell effective medium theory as well as Einstein law of viscosity was used to compare the experimental data with the predicted values for estimating the TC and viscosity of Cu NFs/MFs, respectively.
41.	Nyström, Gustav, et al. (författare) Long cycle life nanocellulose polypyrrole electrodes 2011 Ingår i: Materials Research Society Symposium Proceedings. - : Springer Science and Business Media LLC. - 0272-9172 .- 1946-4274. ; 1312, s. 415-420 Tidskriftsartikel (refereegranskat)abstract A polypyrrole (PPy) nanocellulose composite was shown to cycle well over 3000 cycles in 2.0 M NaCl electrolyte when used as the active material for both electrodes in an energy storage device. SEM micrographs show a highly porous nature of the conductive paper material and electrochemical charge-discharge measurements, as well as external electrode potential monitoring, confirm the good cycling behavior of the material.
42.	Odell, Anders, et al. (författare) Ab Initio Study of Switching Properties of Photochromic Dithienylethene Molecules 2006 Ingår i: Materials Research Society Symposium Proceedings. - : Springer Science and Business Media LLC. - 0272-9172 .- 1946-4274. ; 965, s. 296-300 Tidskriftsartikel (refereegranskat)abstract We report an ab initio study of a photochromic dithienylethene derivative. The mechanisms for switching between open and closed conformations are investigated based on total energy calculations for the ground and first excited state. An explanation for the central ring closure based on relaxation of the excited state is presented.
43.	Oertel, CM, et al. (författare) Focused ion beam and electron microscopy analysis of corrosion of lead-tin alloys: Applications to conservation of organ pipes 2008 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172. - 9781558999886 ; 1047, s. 115-125 Tidskriftsartikel (refereegranskat)abstract Across Europe, lead-tin alloy organ pipes are suffering from atmospheric corrosion. This deterioration can eventually lead to cracks and holes, preventing the pipes from producing sound. Organ pipes are found in compositions ranging from >99% Pb to >99% Sn. For very lead-rich (>99% Pb) pipes, organic acids emitted from the wood of organ cases have previously been identified as significant corrosive agents. In order to study the role of alloy composition in the susceptibility of pipes to organic acid attack, lead-tin alloys containing 1.2-15 at.% Sn were exposed to acetic acid vapors in laboratory exposure studies. Corrosion rates were monitored gravimetrically, and corrosion product phases were identified using grazing incidence angle X-ray diffraction. In a new method, focused-ion beam (FIB) cross sections were cut through corrosion sites, and SEM and WDX were used to obtain detailed information about the morphology and chemical composition of the corrosion layers. The combination of FIB and SEM has made it possible to obtain depth information about these micron-scale layers, providing insight into the influence of acetic acid on alloys in the 1.2-15 at.% Sn range.
44.	Qadeer, Muhammad Ifran, et al. (författare) The Effect of Silanisation on Microstructural Stability and Magnetic Properties of the Intermetallic Sm2(Co, Fe, Cu, Zr)17 2011 Ingår i: Materials Research Society Symposium Proceedings. - : Springer Science and Business Media LLC. - 0272-9172 .- 1946-4274. ; 1295, s. 443-448 Tidskriftsartikel (refereegranskat)abstract The effects of silanising using the coupling agent γ-glycidoxpropyltrimethoxysilane on microstructural stability and magnetic properties of Sm-Co powder particles have been investigated. The silanisation provides structural stability by improving the oxidation resistance at 400oC for 10 hours. The untreated particles undergo microchemical changes by redistribution of alloying elements which mainly accumulate in parallel black and grey streaks in the interior of the particles. The silanised particles after heat treatment show coercivity of 836 Oe and the untreated particles show a much lower coercivity of 376 Oe. The difference in magnetic properties of uncoated particles is caused by diffusion of oxygen and microstructural instability.
45.	Rehammar, Robert, 1980, et al. (författare) Carbon nanofiber-based photonic crystals – fabrication, diffraction and ellipsometry investigations 2011 Ingår i: Carbon-Based Electronic Devices - Processing, Performance and Reliability. - : Materials Research Society. - 0272-9172. - 9781618394996 ; , s. 28-33 Konferensbidrag (refereegranskat)abstract Carbon nanofibers were used as building blocks for two-dimensional photonic crystal slabs. Electron beam lithography and chemical vapor deposition were used to fabricate regular arrays and random patterns of nanofibers. The optical properties of the samples were investigated using a diffraction measurement setup, as well as reflection ellipsometry. We find that carbon nanofiber regularity has a strong effect on both diffractive and specular optical properties. This shows that ellipsometry can be a valuable tool to study properties of carbon nanofiber arrays. It also shows that carbon nanofibers provide an interesting candidate as building blocks for nanostructured optical components.
46.	Riazanova, Anastasia, et al. (författare) Creation of Patterned Gold Nanostructures via Electron-Beam-Induced Deposition 2013 Ingår i: Materials Research Society Symposium Proceedings. - : Springer Science and Business Media LLC. - 0272-9172 .- 1946-4274. ; 1546 Tidskriftsartikel (refereegranskat)abstract One of the methods to grow nanoscale three-dimensional (3D) Au patterns is to perform local electron-beam-induced deposition (EBID) using the Me2Au(acac) precursor inside the chamber of a scanning electron microscope (SEM). However, due to the organometallic nature of the chemical, the concentration of the metallic constituent in the as-deposited structure is dramatically low, at around 10 at. % of Au. Ex-situ post-annealing of Me2Au(acac) EBIDs is a very promising purification approach, resulting in an Au content of > 92 at. % after annealing at 600 °C. However, in most of the cases it also distorts the geometrical shape of the heat-treated structure, preserving of which is essential for the application. In this paper we present a systematic study of the dependence between the annealing parameters and resulting purity in combination with the shape of the Au structure. Optimized heat treatment conditions for the creation of well-purified high aspect ratio Au pillar array are presented; and for planar continuous structures, the importance of the parameter height to area ratio is identified.
47.	Sandén, Björn, 1968 (författare) Standing the test of time: Signals and noise from environmental assessments of energy technologies 2007 Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172. - 9781605110158 ; 1041, s. 183-189 Konferensbidrag (refereegranskat)abstract The point of view taken here is that systems analysis is a kind of learning process, not data gathering, not decision making, but the production and effective communication of arguments relevant in a particular context. This idea, that the intended application of the result of an assessment has consequences for methodological choices, is beginning to spread in the LCA research community. One problem is that standard LCA methodology is developed to answer questions about environmental impacts of the current production and use of one unit of a product or minor product or process changes. When this methodology, unchanged, is used to provide answers to questions about strategic technology choice, i.e. not decisions that aim at improving a process within an existing technological environment, but with the long-term goal of changing large-scale technological systems, the result could be of little value or misleading. In many cases, LCAs produce more noise than knowledge. This observation seems to be of particular importance for LCAs of energy technologies and for how energy use is treated in all kinds of LCAs. Here, it is suggested that a better understanding of some critical methodological issues related to time, universality, cause-effect relationships, technical maturity and system innovation, could result in better studies that reveal fundamental environmental issues related to the objects of study and reduce the noise from irrelevant information. Examples are given from the technology fields of solar cells, fuel cells, batteries, renewable transport fuels and carbon nanoparticles.
48.	Schöche, Stefan, et al. (författare) Infrared ellipsometry and near-infrared-to-vacuum-ultraviolet ellipsometry study of free-charge carrier properties in In-polar p-type InN 2012 Ingår i: MRS Proceedings Volume 1396. - : Springer Science and Business Media LLC. ; , s. o07-27 Konferensbidrag (refereegranskat)abstract We apply infrared spectroscopic ellipsometry (IRSE) in combination with near-infrared to vacuum-ultraviolet ellipsometry to study the concentration and mobility of holes in a set of Mg-doped In-polar InN samples of different Mg-concentrations. P-type behavior is found in the IRSE spectra for Mg-concentrations between 1x1018 cm-3 and 3x1019 cm-3. The free-charge carrier parameters are determined using a parameterized model that accounts for phonon-plasmon coupling. From the NIR-VUV data information about layer thicknesses, surface roughness, and structural InN layer properties are extracted and related to the IRSE results.
49.	Soomro, Muhammad Yousuf, et al. (författare) Zinc Oxide Nanowire Based Piezoelectric Nano Generators Grown on Flexible Substrates 2013 Ingår i: Materials Research Society Symposium Proceedings. - : Cambridge Journals Online. - 0272-9172 .- 1946-4274. ; 1556 Tidskriftsartikel (refereegranskat)abstract Flexible substrates, like plastic, paper and cotton fabrics can be of interest for several reasons in connection to the appealing issue of generating voltage-current from piezoelectric ZnO nanowires (NWs). Zinc oxide NWs have shown very high voltage generation and they are possible to grown on plastic, paper and cotton. Since we with these substrates can get a new freedom to bend and also stretch the NWs and to incorporate them into new applications they are of great potential. Here we will describe the mechanical and piezoelectric properties of ZnO NWs grown on ordinary clean room paper and on cotton fabrics substrates as well as possibility of coating the ZnO NWs to maximize the output generated power. An enhancement of 160 times in the piezo-potential was observed from ZnO NWs coated with P3HT p-type polymer compared to non-coated NWs.
50.	Strömberg, Mattias, et al. (författare) Immobilization of oligonucleotide-functionalized magnetic nanobeads in DNA-coils studied by electron microscopy and atomic force microscopy 2011 Ingår i: MRS Online Proceedings Library. - : Springer Science and Business Media LLC. Konferensbidrag (refereegranskat)abstract Immobilization of oligonucleotide-functionalized magnetic nanobeads by hybridization in DNA-coils formed by rolling circle amplification has been investigated using transmission electron microscopy (TEM) and atomic force microscopy (AFM). The TEM results supported earlier made observations that small beads with low oligonucleotide surface coverage preferably immobilize in the interior of the DNA-coils and do not tend to link several DNA-coils together whereas large beads with high surface coverage to a larger extent connect several DNA-coils together to clusters of several DNA-coils with beads. AFM provided direct visualization of the DNA-coils as thread-like objects. DNA-coils with immobilized beads appeared as a collection of beads with thread-like features in their near vicinity.

Skapa referenser, mejla, bekava och länka

Länka till träfflistan

Träfflista för sökning "L773:0272 9172 OR L773:9781605608266 "

Avgränsa träffmängd

År