| 1. |
- Renneberg, Reinhard, et al.
(författare)
-
Frieder scheller and the short history of biosensors
- 2008
-
Ingår i: Advances in Biochemical Engineering/Biotechnology. - Berlin, Heidelberg : Springer Berlin/Heidelberg. - 0724-6145 .- 1616-8542. - 9783540752004 ; 109, s. 1-18
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- This is a first attempt at a brief sketch of the history of biosensors. It is far from complete and rather unsystematic. Many names are still missing, and we apologize for this. But the authors hope to have laid a humble cornerstone for a future "Complete History of Biosensors". We hope that many of our colleagues will contribute!
|
|
| 2. |
- Chen, Yun, 1978, et al.
(författare)
-
Enabling Technologies to Advance Microbial Isoprenoid Production
- 2015
-
Ingår i: Advances in Biochemical Engineering/Biotechnology. - Cham : Springer International Publishing. - 0724-6145 .- 1616-8542. ; 148, s. 143-160
-
Tidskriftsartikel (refereegranskat)abstract
- Microbial production of isoprenoids provides an attractive alternative to biomass extraction and chemical synthesis. Although widespread research aims for isoprenoid biosynthesis, it is still in its infancy in terms of delivering commercial products. Large barriers remain in realizing a cost-competitive process, for example, developing an optimal microbial cell factory. Here, we summarize the many tools and methods that have been developed in the metabolic engineering of isoprenoid production, with the advent of systems biology and synthetic biology, and discuss how these technologies advance to accelerate the design–build–test engineering cycle to obtain optimum microbial systems. It is anticipated that innovative combinations of new and existing technologies will continue to emerge, which will enable further development of microbial cell factories for commercial isoprenoid production.
|
|
| 3. |
- Concaro, Sebastian, et al.
(författare)
-
Bioreactors for Tissue Engineering of Cartilage
- 2009
-
Ingår i: Advances in Biochemical Engineering/Biotechnology. - 0724-6145 .- 1616-8542. - 9783540693574 ; 112, s. 125-143
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- The cartilage regenerative medicine field has evolved during the last decades. The first-generation technology, autologous chondrocyte transplantation (ACT) involved the transplantation of in vitro expanded chondrocytes to cartilage defects. The second generation involves the seeding of chondrocytes in a three-dimensional scaffold. The technique has several potential advantages such as the ability of arthroscopic implantation, in vitro pre-differentiation of cells and implant stability among others (Brittberg M, Lindahl A, Nilsson A, Ohlsson C, Isaksson O, Peterson L, N Engl J Med 331(14):889-895, 1994; Henderson I, Francisco R, Oakes B, Cameron J, Knee 12(3):209-216, 2005; Peterson L, Minas T, Brittberg M, Nilsson A, Sjogren-Jansson E, Lindahl A, Clin Orthop (374):212-234, 2000; Nagel-Heyer S, Goepfert C, Feyerabend F, Petersen JP, Adamietz P, Meenen NM, et al. Bioprocess Biosyst Eng 27(4):273-280, 2005; Portner R, Nagel-Heyer S, Goepfert C, Adamietz P, Meenen NM, J Biosci Bioeng 100(3):235-245, 2005; Nagel-Heyer S, Goepfert C, Adamietz P, Meenen NM, Portner R, J Biotechnol 121(4):486-497, 2006; Heyland J, Wiegandt K, Goepfert C, Nagel-Heyer S, Ilinich E, Schumacher U, et al. Biotechnol Lett 28(20):1641-1648, 2006). The nutritional requirements of cells that are synthesizing extra-cellular matrix increase along the differentiation process. The mass transfer must be increased according to the tissue properties. Bioreactors represent an attractive tool to accelerate the biochemical and mechanical properties of the engineered tissues providing adequate mass transfer and physical stimuli. Different reactor systems have been [5] developed during the last decades based on different physical stimulation concepts. Static and dynamic compression, confined and nonconfined compression-based reactors have been described in this review. Perfusion systems represent an attractive way of culturing constructs under dynamic conditions. Several groups showed increased matrix production using confined and unconfined systems. Development of automatic culture systems and noninvasive monitoring of matrix production will take place during the next few years in order to improve the cost affectivity of tissue-engineered products. © 2009 Springer.
|
|
| 4. |
- Danielsson, Bengt
(författare)
-
Artificial receptors
- 2008
-
Ingår i: Biosensing for the 21st Century (Advances in Biochemical Engineering/Biotechnology). - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145. - 9783540752004 ; 109, s. 97-122
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Herein I will provide a brief overview of artificial receptors with emphasis on molecularly imprinted polymers (MIPs) and their applications. Alternative techniques to produce artificial receptors such as in silico designed and modelled polymers as well as different receptors designed using libraries of more or less natural composition will also be mentioned. Examples of these include aptamers and bio-nanocomposites. The physical presentation of the receptors is important and may depend on the application. Block polymerization of MIPs and grinding to particles of suitable size used to be the preferred technique, but today beaded materials can be produced in sizes down to nanobeads and also nanofibers can be used to increase available surface area and thereby capacity. For sensor applications it may be attractive to include the artificial receptors in surface coatings or in membrane structures. Different composite designs can be used to provide additional desirable properties. MIPs and other artificial receptors are gaining rapidly increasing attention in very shifting application areas and an attempt to provide a systematic account for current applications has been made with examples from separation, solid-phase extraction, analysis, carbohydrate specific experiments, and MIPs-directed synthesis.
|
|
| 5. |
- Mamo, Gashaw, et al.
(författare)
-
Alkaliphiles : The Emerging Biological Tools Enhancing Concrete Durability
- 2020
-
Ingår i: Advances in Biochemical Engineering/Biotechnology. - Cham : Springer International Publishing. - 1616-8542 .- 0724-6145. ; 172, s. 293-342
-
Bokkapitel (refereegranskat)abstract
- Concrete is one of the most commonly used building materials ever used. Despite it is a very important and common construction material, concrete is very sensitive to crack formation and requires repair. A variety of chemical-based techniques and materials have been developed to repair concrete cracks. Although the use of these chemical-based repair systems are the best commercially available choices, there have also been concerns related to their use. These repair agents suffer from inefficiency and unsustainability. Most of the products are expensive and susceptible to degradation, exhibit poor bonding to the cracked concrete surfaces, and are characterized by different physical properties such as thermal expansion coefficients which are different to that of concrete. Moreover, many of these repair agents contain chemicals that pose environmental and health hazards. Thus, there has been interest in developing concrete crack repair agents that are efficient, long lasting, safe, and benign to the environment and exhibit physical properties which resemble that of the concrete. The search initiated by these desires brought the use of biomineralization processes as tools in mending concrete cracks. Among biomineralization processes, microbially initiated calcite precipitation has emerged as an interesting alternative to the existing chemical-based concrete crack repairing system. Indeed, results of several studies on the use of microbial-based concrete repair agents revealed the remarkable potential of this approach in the fight against concrete deterioration. In addition to repairing existing concrete cracks, microorganisms have also been considered to make protective surface coating (biodeposition) on concrete structures and in making self-healing concrete. Even though a wide variety of microorganisms can precipitate calcite, the nature of concrete determines their applicability. One of the important factors that determine the applicability of microbes in concrete is pH. Concrete is highly alkaline in nature, and hence the microbes envisioned for this application are alkaliphilic or alkali-tolerant. This work reviews the available information on applications of microbes in concrete: repairing existing cracks, biodeposition, and self-healing. Moreover, an effort is made to discuss biomineralization processes that are relevant to extend the durability of concrete structures.
|
|
| 6. |
- Mamo, Gashaw, et al.
(författare)
-
Alkaliphiles : The Versatile Tools in Biotechnology
- 2020
-
Ingår i: Advances in Biochemical Engineering/Biotechnology. - Cham : Springer International Publishing. - 0724-6145 .- 1616-8542. ; 172, s. 1-51
-
Bokkapitel (refereegranskat)abstract
- The extreme environments within the biosphere are inhabited by organisms known as extremophiles. Lately, these organisms are attracting a great deal of interest from researchers and industrialists. The motive behind this attraction is mainly related to the desire for new and efficient products of biotechnological importance and human curiosity of understanding nature. Organisms living in common “human-friendly” environments have served humanity for a very long time, and this has led to exhaustion of the low-hanging “fruits,” a phenomenon witnessed by the diminishing rate of new discoveries. For example, acquiring novel products such as drugs from the traditional sources has become difficult and expensive. Such challenges together with the basic research interest have brought the exploration of previously neglected or unknown groups of organisms. Extremophiles are among these groups which have been brought to focus and garnering a growing importance in biotechnology. In the last few decades, numerous extremophiles and their products have got their ways into industrial, agricultural, environmental, pharmaceutical, and other biotechnological applications. Alkaliphiles, organisms which thrive optimally at or above pH 9, are one of the most important classes of extremophiles. To flourish in their extreme habitats, alkaliphiles evolved impressive structural and functional adaptations. The high pH adaptation gave unique biocatalysts that are operationally stable at elevated pH and several other novel products with immense biotechnological application potential. Advances in the cultivation techniques, success in gene cloning and expression, metabolic engineering, metagenomics, and other related techniques are significantly contributing to expand the application horizon of these remarkable organisms of the ‘bizarre’ world. Studies have shown the enormous potential of alkaliphiles in numerous biotechnological applications. Although it seems just the beginning, some fantastic strides are already made in tapping this potential. This work tries to review some of the prominent applications of alkaliphiles by focusing such as on their enzymes, metabolites, exopolysaccharides, and biosurfactants. Moreover, the chapter strives to assesses the whole-cell applications of alkaliphiles including in biomining, food and feed supplementation, bioconstruction, microbial fuel cell, biofuel production, and bioremediation.
|
|
| 7. |
- Nicholls, Ian A., et al.
(författare)
-
Theoretical and Computational Strategies for the Study of the Molecular Imprinting Process and Polymer Performance
- 2015
-
Ingår i: Molecularly Imprinted Polymers In Biotechnology. - Cham, Switzerland : Springer. - 0724-6145 .- 1616-8542. - 9783319207292 - 9783319207285 ; , s. 25-50
-
Bokkapitel (refereegranskat)abstract
- The development of in silico strategies for the study of the molecular imprinting process and the properties of molecularly imprinted materials has been driven by a growing awareness of the inherent complexity of these systems and even by an increased awareness of the potential of these materials for use in a range of application areas. Here we highlight the development of theoretical and computational strategies that are contributing to an improved understanding of the mechanisms underlying molecularly imprinted material synthesis and performance, and even their rational design.
|
|
| 8. |
- Papini, Marta, 1981, et al.
(författare)
-
Systems Biology of Industrial Microorganisms
- 2010
-
Ingår i: Advances in Biochemical Engineering/Biotechnology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145 .- 1616-8542. - 9783642142307 ; 120, s. 51-99
-
Tidskriftsartikel (refereegranskat)abstract
- The field of industrial biotechnology is expanding rapidly as the chemical industry is looking towards more sustainable production of chemicals that can be used as fuels or building blocks for production of solvents and materials. In connection with the development of sustainable bioprocesses, it is a major challenge to design and develop efficient cell factories that can ensure cost efficient conversion of the raw material into the chemical of interest. This is achieved through metabolic engineering, where the metabolism of the cell factory is engineered such that there is an efficient conversion of sugars, the typical raw materials in the fermentation industry, into the desired product. However, engineering of cellular metabolism is often challenging due to the complex regulation that has evolved in connection with adaptation of the different microorganisms to their ecological niches. In order to map these regulatory structures and further de-regulate them, as well as identify ingenious metabolic engineering strategies that full-fill mass balance constraints, tools from systems biology can be applied. This involves both high-throughput analysis tools like transcriptome, proteome and metabolome analysis, as well as the use of mathematical modeling to simulate the phenotypes resulting from the different metabolic engineering strategies. It is in fact expected that systems biology may substantially improve the process of cell factory development, and we therefore propose the term Industrial Systems Biology for how systems biology will enhance the development of industrial biotechnology for sustainable chemical production.
|
|
| 9. |
- Schnürer, Anna
(författare)
-
Biogas Production: Microbiology and Technology
- 2016
-
Ingår i: Advances in Biochemical Engineering Biotechnology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145 .- 1616-8542. ; 156, s. 195-234
-
Tidskriftsartikel (refereegranskat)abstract
- Biogas, containing energy-rich methane, is produced by microbial decomposition of organic material under anaerobic conditions. Under controlled conditions, this process can be used for the production of energy and a nutrient-rich residue suitable for use as a fertilising agent. The biogas can be used for production of heat, electricity or vehicle fuel. Different substrates can be used in the process and, depending on substrate character, various reactor technologies are available. The microbiological process leading to methane production is complex and involves many different types of microorganisms, often operating in close relationships because of the limited amount of energy available for growth. The microbial community structure is shaped by the incoming material, but also by operating parameters such as process temperature. Factors leading to an imbalance in the microbial community can result in process instability or even complete process failure. To ensure stable operation, different key parameters, such as levels of degradation intermediates and gas quality, are often monitored. Despite the fact that the anaerobic digestion process has long been used for industrial production of biogas, many questions need still to be resolved to achieve optimal management and gas yields and to exploit the great energy and nutrient potential available in waste material. This chapter discusses the different aspects that need to be taken into consideration to achieve optimal degradation and gas production, with particular focus on operation management and microbiology.
|
|
| 10. |
- van Niel, Ed
(författare)
-
Biological processes for hydrogen production
- 2016
-
Ingår i: Anaerobes in Biotechnology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 9783319456515 ; , s. 1-39
-
Bokkapitel (refereegranskat)abstract
- Methane is produced usually from organic waste in a straightforward anaerobic digestion process. However, hydrogen production is technically more challenging as more stages are needed to convert all biomass to hydrogen because of thermodynamic constraints. Nevertheless, the benefit of hydrogen is that it can be produced, both biologically and thermochemically, in more than one way from either organic compounds or water. Research in biological hydrogen production is booming, as reflected by the myriad of recently published reviews on the topic. This overview is written from the perspective of how to transfer as much energy as possible from the feedstock into the gaseous products hydrogen, and to a lesser extent, methane. The status and remaining challenges of all the biological processes are concisely discussed.
|
|
| 11. |
- Börner, Rosa Aragão
(författare)
-
Isolation and cultivation of anaerobes
- 2016
-
Ingår i: Advances in Biochemical Engineering/Biotechnology. - Cham : Springer International Publishing. - 0724-6145. ; 156
-
Bokkapitel (refereegranskat)abstract
- Anaerobic microorganisms play important roles in different biotechnological processes. Their complex metabolism and special cultivation requirements have led to less isolated representatives in comparison to their aerobic counterparts. In view of that, the isolation and cultivation of anaerobic microorganisms is still a promising venture, and conventional methodologies as well as considerations and modifications are presented here. An insight into new methodologies and devices as well as a discussion on future perspectives for the cultivation of anaerobes may open the prospects of the exploitation of these microorganisms as a source for biotechnology.
|
|
| 12. |
- Dainiak, Maria, et al.
(författare)
-
Chromatography of living cells using supermacroporous hydrogels, cryogels
- 2007
-
Ingår i: Advances in Biochemical Engineering, Biotechnology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145. ; 106, s. 101-127
-
Tidskriftsartikel (refereegranskat)abstract
- The preparative cell separation is an intrinsic requirement of various diagnostic, biotechnological and biomedical applications. Affinity chromatography is a promising technique for cell separation and is based on the interaction between a cell surface receptor and an immobilised ligand. Most of the currently available matrices have pore size smaller than the size of the cells and are not suitable for cell chromatography due to column clogging. Another problem encountered in chromatographic separation of cells is a difficulty to elute bound cells from affinity surfaces. Application of novel adsorbents, supermacroporous monolithic cryogels, allows overcoming these problems. Cryogels are characterised by highly interconnected large (10-100 mu m) pores, sponge-like morphology and high elasticity. They are easily derivatised with any ligand of choice. Convective migration can be used to transport the cells through the matrix. Target cells bind to affinity ligands, while other cells pass through the cryogel column non-retained and are removed during a washing step. Because of the spongy and elastic nature of the cryogel matrices, the cells are efficiently desorbed by mechanical compression of cryogels, which provides high cell viability and yields. The release of affinity bound cells by mechanical compression of a cryogel monolithic adsorbent is a unique and efficient way of cell detachment. This detachment strategy and the continuous macroporous structure make cryogels very attractive for application in cell separation chromatography.
|
|
| 13. |
- Dainiak, Maria, et al.
(författare)
-
Methods in cell separations
- 2007
-
Ingår i: Advances in Biochemical Engineering, Biotechnology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145. ; 106, s. 1-18
-
Tidskriftsartikel (refereegranskat)abstract
- Research in the field of cell biology and biomedicine relies on technologies that fractionate cell populations and isolate rare cell types to high purity. A brief overview of methods and commercially available products currently used in cell separations is presented. Cell fractionation by size and density and highly selective affinity-based technologies such as affinity chromatography, fluorescence-activated cell sorting (FACS) and magnetic cell sorting are discussed in terms of throughput, yield, and purity.
|
|
| 14. |
- Fernandes, Rita Lencastre, et al.
(författare)
-
Applying Mechanistic Models in Bioprocess Development
- 2013
-
Ingår i: Advances in Biochemical Engineering, Biotechnology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145. ; 132, s. 137-166
-
Tidskriftsartikel (refereegranskat)abstract
- The available knowledge on the mechanisms of a bioprocess system is central to process analytical technology. In this respect, mechanistic modeling has gained renewed attention, since a mechanistic model can provide an excellent summary of available process knowledge. Such a model therefore incorporates process-relevant input (critical process variables)-output (product concentration and product quality attributes) relations. The model therefore has great value in planning experiments, or in determining which critical process variables need to be monitored and controlled tightly. Mechanistic models should be combined with proper model analysis tools, such as uncertainty and sensitivity analysis. When assuming distributed inputs, the resulting uncertainty in the model outputs can be decomposed using sensitivity analysis to determine which input parameters are responsible for the major part of the output uncertainty. Such information can be used as guidance for experimental work; i.e., only parameters with a significant influence on model outputs need to be determined experimentally. The use of mechanistic models and model analysis tools is demonstrated in this chapter. As a practical case study, experimental data from Saccharomyces cerevisiae fermentations are used. The data are described with the well-known model of Sonnleitner and Kappeli (Biotechnol Bioeng 28: 927-937, 1986) and the model is analyzed further. The methods used are generic, and can be transferred easily to other, more complex case studies as well.
|
|
| 15. |
- Galbe, Mats, et al.
(författare)
-
Pretreatment of Lignocellulosic Materials for Efficient Bioethanol Production
- 2007
-
Ingår i: Advances in Biochemical Engineering/Biotechnology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145. - 9783540736509 ; 108, s. 41-65
-
Bokkapitel (refereegranskat)abstract
- Second-generation bioethanol produced from various lignocellulosic materials, such as wood, agricultural or forest residues, has the potential to be a valuable substitute for, or a complement to, gasoline. One of the crucial steps in the ethanol production is the hydrolysis of the hemicellulose and cellulose to monomer sugars. The most promising method for hydrolysis of cellulose to glucose is by use of enzymes, i.e. cellulases. However, in order to make the raw material accessible to the enzymes some kind of pretreatment is necessary. During the last few years a large number of pretreatment methods have been developed, comprising methods working at low pH, i.e. acid based, medium pH (without addition of catalysts), and high pH, i.e. with a base as catalyst. Many methods have been shown to result in high sugar yields, above 90% of theoretical for agricultural residues, especially for corn stover. For more recalcitrant materials, e.g. softwood, acid hydrolysis and steam pretreatment with acid catalyst seem to be the methods that can be used to obtain high sugar and ethanol yields. However, for more accurate comparison of different pretreatment methods it is necessary to improve the assessment methods under real process conditions. The whole process must be considered when a performance evaluation is to be made, as the various pretreatment methods give different types of materials. (Hemicellulose sugars can be obtained either in the liquid as monomer or oligomer sugars, or in the solid material to various extents; lignin can be either in the liquid or remain in the solid part; the composition and amount/concentration of possible inhibitory compounds also vary.) This will affect how the enzymatic hydrolysis should be performed(e.g. with or without hemicellulases), how the lignin is recovered and also the use of the lignin co-product.
|
|
| 16. |
- Galbe, Mats, et al.
(författare)
-
Process Engineering Economics of Bioethanol Production
- 2007
-
Ingår i: Advances in Biochemical Engineering/Biotechnology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145. - 9783540736509 ; 108, s. 303-327
-
Bokkapitel (refereegranskat)abstract
- This work presents a review of studies on the process economics of ethanol production from lignocellulosic materials published since 1996. Our objective was to identify the most costly process steps and the impact of various parameters on the fi- nal production cost, e.g. plant capacity, raw material cost, and overall product yield, as well as process configuration. The variation in estimated ethanol production cost is considerable, ranging from about 0.13 to 0.81 US$ per liter ethanol. This can be explained to a large extent by actual process differences and variations in the assumptions underlying the techno-economic evaluations. The most important parameters for the economic outcome are the feedstock cost, which varied between 30 and 90US$ per metric ton in the papers studied, and the plant capacity, which influences the capital cost. To reduce the ethanol production cost it is necessary to reach high ethanol yields, as well as a high ethanol concentration during fermentation, to be able to decrease the energy required for distillation and other downstream process steps. Improved pretreatment methods, enhanced enzymatic hydrolysis with cheaper and more effective enzymes, as well as improved fermentation systems present major research challenges if we are to make lignocellulose-based ethanol production competitive with sugar- and starch-based ethanol. Process integration, either internally or externally with other types of plants, e.g. heat and power plants, also offers a way of reducing the final ethanol production cost.
|
|
| 17. |
- Hahn-Hägerdal, Bärbel, et al.
(författare)
-
Metabolic engineering for pentose utilization in Saccharomyces cerevisiae
- 2007
-
Ingår i: Advances in Biochemical Engineering/Biotechnology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145. - 9783540736509 ; 108, s. 147-177
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- The introduction of pentose utilization pathways in baker's yeast Saccharomyces cerevisiae is summarized together with metabolic engineering strategies to improve ethanolic pentose fermentation. Bacterial and fungal xylose and arabinose pathways have been expressed in S. cerevisiae but do not generally convey significant ethanolic fermentation traits to this yeast. A large number of rational metabolic engineering strategies directed among others toward sugar transport, initial pentose conversion, the pentose phosphate pathway, and the cellular redox metabolism have been exploited. The directed metabolic engineering approach has often been combined with random approaches including adaptation, mutagenesis, and hybridization. The knowledge gained about pentose fermentation in S. cerevisiae is primarily limited to genetically and physiologically well-characterized laboratory strains. The translation of this knowledge to strains performing in an industrial context is discussed.
|
|
| 18. |
- Hahn-Hägerdal, Bärbel, et al.
(författare)
-
Metabolic engineering of Saccharomyces cerevisiae for xylose utilization.
- 2001
-
Ingår i: Advances in Biochemical Engineering, Biotechnology. - 0724-6145. ; 73, s. 53-84
-
Tidskriftsartikel (refereegranskat)abstract
- Metabolic engineering of Saccharomyces cerevisiae for ethanolic fermentation of xylose is summarized with emphasis on progress made during the last decade. Advances in xylose transport, initial xylose metabolism, selection of host strains, transformation and classical breeding techniques applied to industrial polyploid strains as well as modeling of xylose metabolism are discussed. The production and composition of the substrates--lignocellulosic hydrolysates--is briefly summarized. In a future outlook iterative strategies involving the techniques of classical breeding, quantitative physiology, proteomics, DNA micro arrays, and genetic engineering are proposed for the development of efficient xylose-fermenting recombinant strains of S. cerevisiae.
|
|
| 19. |
- Hatti-Kaul, Rajni, et al.
(författare)
-
Anaerobes in industrial- and environmental biotechnology
- 2016
-
Ingår i: Anaerobes in Biotechnology. Advances in Biochemical Engineering : Biotechnology - Biotechnology. - Cham : Springer International Publishing. - 0724-6145. - 9783319456515 - 9783319456492 ; 156, s. 1-33
-
Bokkapitel (refereegranskat)abstract
- Anaerobic microorganisms present in diverse ecological niches employ alternative strategies for energy conservation in the absence of oxygen which enables them to play a key role in maintaining the global cycles of carbon, nitrogen, and sulfur, and the breakdown of persistent compounds. Thereby they become useful tools in industrial and environmental biotechnology. Although anaerobes have been relatively neglected in comparison to their aerobic counterparts, with increasing knowledge about their diversity and metabolic potential and the development of genetic tools and process technologies to utilize them, we now see a rapid expansion of their applications in the society. This chapter summarizes some of the developments in the use of anaerobes as tools for biomass valorization, in production of energy carriers and chemicals, wastewater treatment, and the strong potential in soil remediation. The ability of several autotrophic anaerobes to reduce carbon dioxide is attracting growing attention as a means for developing a platform for conversion of waste gases to chemicals, materials, and biofuels.
|
|
| 20. |
- Kamihira, Masamichi, et al.
(författare)
-
Development of separation technique for stem cells
- 2007
-
Ingår i: Advances in Biochemical Engineering, Biotechnology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145. ; 106, s. 173-193
-
Tidskriftsartikel (refereegranskat)abstract
- In recent years, human embryonic stem cells have been established, and somatic stem cells derived from various adult organs have been identified and characterized to differentiate into various kinds of functional cells. There have been attempts to use functional cells induced from such stem cells for tissue regeneration and cell therapy. The method is expected to become an important treatment for intractable diseases in the near future. Since tissues and organs generally contain only a small quantity of somatic stem cells, and since it is necessary to separate functional cells generated from stem cells for use in therapy, an effective method for specific cell separation is crucial to the practical application of regenerative medicine. For the specific separation of cells, a fluorescence activated cell sorter using specific antibodies is a powerful tool, but the method is not suitable for large-scale processing and a special device is required. Although a magnetic cell separation system using immuno-magnetic fine particles is also commercially available, the system still needs special apparatus for large-scale processing. We developed a novel method for the separation of specific cells in an aqueous two-phase system using antibodies modified with a temperature-responsive polymer. The method enables the processing of a large quantity of cells without the requirement of a special device.
|
|
| 21. |
|
|
| 22. |
- Mamo, Gashaw
(författare)
-
Anaerobes as sources of bioactive compounds and health promoting tools
- 2016
-
Ingår i: Advances in Biochemical Engineering/Biotechnology. - Cham : Springer International Publishing. - 0724-6145. ; 156, s. 433-464
-
Bokkapitel (refereegranskat)abstract
- Aerobic microorganisms have been sources of medicinal agents for several decades and an impressive variety of drugs have been isolated from their cultures, studied and formulated to treat or prevent diseases. On the other hand, anaerobes, which are believed to be the oldest life forms on earth and evolved remarkably diverse physiological functions, have largely been neglected as sources of bioactive compounds. However, results obtained from the limited research done so far show that anaerobes are capable of producing a range of interesting bioactive compounds that can promote human health. In fact, some of these bioactive compounds are found to be novel in their structure and/or mode of action. Anaerobes play health-promoting roles through their bioactive products as well as application of whole cells. The bioactive compounds produced by these microorganisms include antimicrobial agents and substances such as immunomodulators and vitamins. Bacteriocins produced by anaerobes have been in use as preservatives for about 40 years. Because these substances are effective at low concentrations, encounter relatively less resistance from bacteria and are safe to use, there is a growing interest in these antimicrobial agents. Moreover, several antibiotics have been reported from the cultures of anaerobes. Closthioamide and andrimid produced by Clostridium cellulolyticum and Pantoea agglomerans, respectively, are examples of novel antibiotics of anaerobe origin. The discovery of such novel bioactive compounds is expected to encourage further studies which can potentially lead to tapping of the antibiotic production potential of this fascinating group of microorganisms. Anaerobes are widely used in preparation of fermented foods and beverages. During the fermentation processes, these organisms produce a number of bioactive compounds including anticancer, antihypertensive and antioxidant substances. The well-known health promoting effect of fermented food is mostly due to these bioactive compounds. In addition to their products, whole cell anaerobes have very interesting applications for enhancing the quality of life. Probiotic anaerobes have been on the market for many years and are receiving growing acceptance as health promoters. Gut anaerobes have been used to treat patients suffering from severe Clostridium difficile infection syndromes including diarrhoea and colitis which cannot be treated by other means. Whole cell anaerobes are also studied to detect and cure cancer. In recent years, evidence is emerging that anaerobes constituting the microbiome are linked to our overall health. A dysfunctional microbiome is believed to be the cause of many diseases including cancer, allergy, infection, obesity, diabetes and several other disorders. Maintaining normal microflora is believed to alleviate some of these serious health problems. Indeed, the use of probiotics and prebiotics which favourably change the number and composition of the gut microflora is known to render a health promoting effect. Our interaction with the microbiome anaerobes is complex. In fact, not only our lives but also our identities are more closely linked to the anaerobic microbial world than we may possibly imagine. We are just at the beginning of unravelling the secret of association between the microbiome and human body, and a clear understanding of the association may bring a paradigm shift in the way we diagnose and treat diseases and disorders. This chapter highlights some of the work done on bioactive compounds and whole cell applications of the anaerobes that foster human health and improve the quality of life.
|
|
| 23. |
- Mamo, Gashaw, et al.
(författare)
-
Preface
- 2020
-
Ingår i: Alkaliphiles in Biotechnology. - 0724-6145. ; 172
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 24. |
- Mattiasson, Bo
(författare)
-
MIPs as Tools in Environmental Biotechnology.
- 2015
-
Ingår i: Advances in Biochemical Engineering, Biotechnology. - Cham : Springer International Publishing. - 0724-6145. ; 150, s. 183-205
-
Tidskriftsartikel (refereegranskat)abstract
- : Molecular imprints are potentially fantastic constructions. They are selective, robust, and nonbiodegradable if produced from stable polymers. A range of different applications has been presented, everything from separation of enantiomers, via adsorbents for sample preparation before analysis to applications in wastewater treatment. This chapter deals with molecularly imprinted polymers (MIPs) as tools in environmental biotechnology, a field that has the potential to become very important in the future.
|
|
| 25. |
|
|
| 26. |
- Rozkov, Aleksei D., et al.
(författare)
-
Analysis and control of proteolysis of recombinant proteins in Escherichia coli.
- 2004
-
Ingår i: Advances in biochemical engineering/biotechnology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145. ; 89, s. 163-195
-
Tidskriftsartikel (refereegranskat)abstract
- Proteolysis is one of the reasons for poor production of recombinant proteins in Escherichia coli. Important properties of E. coli proteases, which are relevant for the production of recombinant proteins, are reviewed. Furthermore, various strategies to control the proteolysis of the recombinant proteins are presented. These strategies for control of proteolysis can be applied on various stages of the process: design of more stable protein, a modification of the host cell in respect to proteolytic activity, optimisation of cultivation and downstream processing. However, before implementing these measures the proteolysis rate should be measured in order to calculate a potential benefit of reduced proteolysis rate.
|
|
| 27. |
- Xie, Bin, et al.
(författare)
-
Principles of enzyme thermistor systems: applications to biomedical and other measurements
- 1999
-
Ingår i: Thermal Biosensors, Bioactivity, Bioaffinity. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0724-6145. - 9783540649670 - 9783540498117 ; 64
-
Bokkapitel (refereegranskat)abstract
- This chapter presents an overview of thermistor-based calorimetric measurements. Bioanalytical applications are emphasized from both the chemical and biomedical points of view. The introductory section elucidates the principles involved in the thermometric measurements. The following section describes in detail the evolution of the various versions of enzyme-thermistor devices. Special emphasis is laid on the description of modern "mini" and "miniaturized" versions of enzyme thermistors. Hybrid devices are also introduced in this section. In the sections on applications, the clinical/biomedical areas are dealt with separately, followed by other applications. Mention is also made of miscellaneous applications. A special section is devoted to future developments, wherein novel concepts of telemedicine and home diagnostics are highlighted. The role of communication and information technology in telemedicine is also mentioned. In the concluding sections, an attempt is made to incorporate the most recent references on specific topics based on enzyme-thermistor systems.
|
|
| 28. |
- Ye, Lei
(författare)
-
Synthetic Strategies in Molecular Imprinting.
- 2015
-
Ingår i: Advances in Biochemical Engineering, Biotechnology. - Cham : Springer International Publishing. - 0724-6145. ; 150:Online 04 April 2015, s. 1-24
-
Tidskriftsartikel (refereegranskat)abstract
- : This chapter introduces the basic principle and the synthetic aspects of molecular imprinting. First, the use of a molecular template to guide the location of functional groups inside molecularly imprinted cavities is explained. Three different mechanisms that ensure a molecular template associates with functional monomers or the imprinted polymers, that is, through reversible covalent, noncovalent, and sacrificial covalent bonds, are then described. The main focus is put on noncovalent molecular imprinting using free radical polymerization. The merits of using classical radical polymerization and more sophisticated, controlled radical polymerization are analyzed. After these synthetic chemistry aspects, the chapter continues to discuss the different polymerization processes that can be used to prepare well-defined polymer monoliths, microspheres, and nanoparticles. New top-down processing techniques that produce micro- and nanopatterns of imprinted polymers are also reviewed. The chapter finishes with a brief introduction to using imprinted polymers as building blocks to construct new functional materials and devices, which we consider as one important direction for further development.
|
|
