| 1. |
- Asmuth, Henrik, et al.
(författare)
-
Actuator line simulations of wind turbine wakes using the lattice Boltzmann method
- 2020
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7443 .- 2366-7451. ; 5:2, s. 623-645
-
Tidskriftsartikel (refereegranskat)abstract
- The high computational demand of large-eddy simulations (LESs) remains the biggest obstacle for a wider applicability of the method in the field of wind energy. Recent progress of GPU-based (graphics processing unit) lattice Boltzmann frameworks provides significant performance gains alleviating such constraints. The presented work investigates the potential of LES of wind turbine wakes using the cumulant lattice Boltzmann method (CLBM). The wind turbine is represented by the actuator line model (ALM). The implementation is validated and discussed by means of a code-to-code comparison to an established finite-volume Navier–Stokes solver. To this end, the ALM is subjected to both laminar and turbulent inflow while a standard Smagorinsky sub-grid-scale model is employed in the two numerical approaches. The resulting wake characteristics are discussed in terms of the first- and second-order statistics as well the spectra of the turbulence kinetic energy. The near-wake characteristics in laminar inflow are shown to match closely with differences of less than 3 % in the wake deficit. Larger discrepancies are found in the far wake and relate to differences in the point of the laminar-turbulent transition of the wake. In line with other studies, these differences can be attributed to the different orders of accuracy of the two methods. Consistently better agreement is found in turbulent inflow due to the lower impact of the numerical scheme on the wake transition. In summary, the study outlines the feasibility of wind turbine simulations using the CLBM and further validates the presented set-up. Furthermore, it highlights the computational potential of GPU-based LBM implementations for wind energy applications. For the presented cases, near-real-time performance was achieved using a single, off-the-shelf GPU on a local workstation.
|
|
| 2. |
- Baungaard, Mads, et al.
(författare)
-
Wind turbine wake simulation with explicit algebraic Reynolds stress modeling
- 2022
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7443 .- 2366-7451. ; 7:5, s. 1975-2002
-
Tidskriftsartikel (refereegranskat)abstract
- Reynolds-averaged Navier-Stokes (RANS) simulations of wind turbine wakes are usually conducted with two-equation turbulence models based on the Boussinesq hypothesis; these are simple and robust but lack the capability of predicting various turbulence phenomena. Using the explicit algebraic Reynolds stress model (EARSM) of Wallin and Johans son (2000) can alleviate some of these deficiencies while still being numerically robust and only slightly more computationally expensive than the traditional two-equation models. The model implementation is verified with the homogeneous shear flow, half-channel flow, and square duct flow cases, and subsequently full three-dimensional wake simulations are run and analyzed. The results are compared with reference large-eddy simulation (LES) data, which show that the EARSM especially improves the prediction of turbulence anisotropy and turbulence intensity but that it also predicts less Gaussian wake profile shapes.
|
|
| 3. |
- Coelho Leite Fava, Thales, et al.
(författare)
-
A simplified model for transition prediction applicable to wind-turbine rotors
- 2021
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7443 .- 2366-7451. ; 6:3, s. 715-736
-
Tidskriftsartikel (refereegranskat)abstract
- This work aims to develop a simple framework for transition prediction over wind-turbine blades, including effects of the blade rotation and spanwise velocity without requiring fully three-dimensional simulations. The framework is based on a set of boundary-layer equations (BLEs) and parabolized stability equations (PSEs), including rotation effects. An important element of the developed BL method is the modeling of the spanwise velocity at the boundary-layer edge. The two analyzed wind-turbine geometries correspond to a constant airfoil and the DTU 10-MW Reference Wind Turbine blades. The BL model allows an accurate prediction of thechordwise velocity profiles. Further, for regions not too close to the stagnation point and root of the blade, profiles of the spanwise velocity agree with those from Reynolds-averaged Navier–Stokes (RANS) simulations.The model also allows predicting inflectional velocity profiles for lower radial positions, which may allow cross-flow transition. Transition prediction is performed at several radial positions through an “envelope-of-envelopes” methodology. The results are compared with the eN method of Drela and Giles, implemented in the EllipSys3D RANS code. The RANS transition locations closely agree with those from the PSE analysis of a 2D mean flow without rotation. These results also agree with those from the developed model for cases with low 3D and rota-tion effects, such as at higher radial positions and geometries with strong adverse pressure gradients where 2D Tollmien–Schlichting (TS) waves are dominant. However, the RANS and PSE 2D models predict a later transition in the regions where 3D and rotation effects are non-negligible. The developed method, which accounts for these effects, predicted earlier transition onsets in this region (e.g., 19 % earlier than RANS at 26 % of theradius for the constant-airfoil geometry) and shows that transition may occur via highly oblique modes. These modes differ from 2D TS waves and appear in locations with inflectional spanwise velocity. However, except close to the root of the blade, crossflow transition is unlikely since the crossflow velocity is too low. At higher radial positions, where 3D and rotation effects are weaker and the adverse pressure gradient is more significant, modes with small wave angles (close to 2D) are found to be dominant. Finally, it is observed that an increase in the rotation speed modifies the spanwise velocity and increases the Coriolis and centrifugal forces, shifting the transition location closer to the leading edge. This work highlights the importance of considering the blade rotation and the three-dimensional flow generated by that in transition prediction, especially in the inner part of the blade.
|
|
| 4. |
- Diaz, Gonzalo Pablo Navarro, et al.
(författare)
-
Actuator line model using simplified force calculation methods
- 2023
-
Ingår i: Wind Energy Science. - : Copernicus Publications. - 2366-7443 .- 2366-7451. ; 8:3, s. 363-382
-
Tidskriftsartikel (refereegranskat)abstract
- To simulate transient wind turbine wake interaction problems using limited wind turbine data, two new variants of the actuator line technique are proposed in which the rotor blade forces are computed locally using generic load data. The proposed models, which are extensions of the actuator disk force models proposed by Navarro Diaz et al. (2019a) and Sorensen et al. (2020), only demand thrust and power coefficients and the tip speed ratio as input parameters. In the paper the analogy between the actuator disk model (ADM) and the actuator line model (ALM) is shown, and from this a simple methodology to implement local forces in the ALM without the need for knowledge of blade geometry and local airfoil data is derived. Two simplified variants of ALMs are proposed, an analytical one based on Sorensen et al. (2020) and a numerical one based on Navarro Diaz et al. (2019a). The proposed models are compared to the ADM using analogous data, as well as to the classical ALM based on blade element theory, which provides more detailed force distributions by using airfoil data. To evaluate the local force calculation, the analysis of a partial-wake interaction case between two wind turbines is carried out for a uniform laminar inflow and for a turbulent neutral atmospheric boundary layer inflow. The computations are performed using the large eddy simulation facility in Open Source Field Operation and Manipulation (OpenFOAM), including Simulator for Wind Farm Applications (SOWFA) libraries and the reference National Renewable Energy Laboratory (NREL) 5 MW wind turbine as the test case. In the single-turbine case, computed normal and tangential force distributions along the blade showed a very good agreement between the employed models. The two new ALMs exhibited the same distribution as the ALM based on geometry and airfoil data, with minor differences due to the particular tip correction needed in the ALM. For the challenging partially impacted wake case, both the analytical and the numerical approaches manage to correctly capture the force distribution at the different regions of the rotor area, with, however, a consistent overestimation of the normal force outside the wake and an underestimation inside the wake. The analytical approach shows a slightly better performance in wake impact cases compared to the numerical one. As expected, the ALMs gave a much more detailed prediction of the higher-frequency power output fluctuations than the ADM. These promising findings open the possibility to simulate commercial wind farms in transient inflows using the ALM without having to get access to actual wind turbine and airfoil data, which in most cases are restricted due to confidentiality.
|
|
| 5. |
- Espinoza, Nicolas, 1984, et al.
(författare)
-
Field-test of wind turbine by voltage source converter
- 2019
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7451 .- 2366-7443. ; 4:3, s. 465-477
-
Tidskriftsartikel (refereegranskat)abstract
- One of the main challenges for wind energy development is making wind turbines efficient in terms of costs whilst maintaining safe and reliable operation. An important design criterion is to fulfil the grid codes given by the transmission system operators. Grid codes state how wind farms must perform when connected to the grid under normal and abnormal conditions. In this regard, it is well-known that not all technical requirements can be tested by using actual impedance-based test equipment. Therefore, test equipment comprising a fully rated voltage source converter in back-to-back configuration is proposed. Thanks to the full controllability of the applied voltage in terms of magnitude, phase and frequency, the use of voltage-source-converter-based test equipment provides more flexibility compared to actual test systems. As demonstrated in this paper, the investigated test device not only can recreate any type of fault, including its recovery ramp, but also can carry out steady-state tests, such as frequency variations and frequency scan, on the test object. Finally, test results from a 4.1 MW wind turbine and 8 MW test equipment located in Gothenburg, Sweden, are shown to validate the investigated grid code test methodology.
|
|
| 6. |
- Floors, Rogier, et al.
(författare)
-
From lidar scans to roughness maps for wind resource modelling in forested areas
- 2018
-
Ingår i: Wind Energy Science. - : COPERNICUS GESELLSCHAFT MBH. - 2366-7443 .- 2366-7451. ; 3:1, s. 353-370
-
Tidskriftsartikel (refereegranskat)abstract
- Applying erroneous roughness lengths can have a large impact on the estimated performance of wind turbines, particularly in forested areas. In this study, a new method called the objective roughness approach (ORA), which converts tree height maps created using airborne lidar scans to roughness maps suitable for wind modelling, is evaluated via cross predictions among different anemometers at a complex forested site with seven tall meteorological masts using the Wind Atlas Analysis and Application Program (WAsP). The cross predictions were made using ORA maps created at four spatial resolutions and from four freely available roughness maps based on land use classifications. The validation showed that the use of ORA maps resulted in a closer agreement with observational data for all investigated resolutions compared to the land use maps. Further, when using the ORA maps, the risk of making large errors (>25%) in predicted power density was reduced by 40-50% compared to satellite-based products with the same resolution. The results could be further improved for high-resolution ORA maps by adding the displacement height. The improvements when using the ORA maps were both due to a higher roughness length and due to the higher resolution.
|
|
| 7. |
- Hallgren, Christoffer, et al.
(författare)
-
Brief communication : On the definition of the low-level jet
- 2023
-
Ingår i: Wind Energy Science. - : Copernicus Publications. - 2366-7443 .- 2366-7451. ; 8:11, s. 1651-1658
-
Tidskriftsartikel (refereegranskat)abstract
- Low-level jets (LLJs) are examples of non-logarithmic wind speed profiles affecting wind turbine power production, wake recovery, and structural/aerodynamic loading. However, there is no consensus regarding which definition should be applied for jet identification. In this study we argue that a shear definition is more relevant to wind energy than a falloff definition. The shear definition is demonstrated and validated through the development of a European Centre for Medium-Range Weather Forecasts (ECMWF) fifth-generation reanalysis (ERA5) LLJ climatology for six sites. Identification of LLJs and their morphology, frequency, and intensity is critically dependent on the (i) vertical window of data from which LLJs are extracted and (ii) the definition employed.
|
|
| 8. |
- Hallgren, Christoffer, et al.
(författare)
-
Classification and properties of non-idealized coastal wind profiles - an observational study
- 2022
-
Ingår i: Wind Energy Science. - : Copernicus Publications. - 2366-7443 .- 2366-7451. ; 7:3, s. 1183-1207
-
Tidskriftsartikel (refereegranskat)abstract
- Non-idealized wind profiles frequently occur over the Baltic Sea and are important to take into consideration for offshore wind power, as they affect not only the power production but also the loads on the structure and the behavior of the wake behind the turbine. In this observational study, we classified non-idealized profiles as the following wind profiles having negative shear in at least one part of the lidar wind profile between 28 and 300 m: low-level jets (with a local wind maximum in the profile), profiles with a local minimum and negative profiles. Using observations spanning over 3 years, we show that these non-idealized profiles are common over the Baltic Sea in late spring and summer, with a peak of 40 % relative occurrence in May. Negative profiles (in the 28-300 m layer) mostly occurred during unstable conditions, in contrast to low-level jets that primarily occurred in stable stratification. There were indications that the strong shear zone of low-level jets could cause a relative suppression of the variance for large turbulent eddies compared to the peak of the velocity spectra, in the layer below the jet core. Swell conditions were found to be favorable for the occurrence of negative profiles and profiles with a local minimum, as the waves fed energy into the surface layer, resulting in an increase in the wind speed from below.
|
|
| 9. |
- Hallgren, Christoffer, et al.
(författare)
-
Machine learning methods to improve spatial predictions of coastal wind speed profiles and low-level jets using single-level ERA5 data
- 2024
-
Ingår i: Wind Energy Science. - : Copernicus Publications. - 2366-7443 .- 2366-7451. ; 9:4, s. 821-840
-
Tidskriftsartikel (refereegranskat)abstract
- Observations of the wind speed at heights relevant for wind power are sparse, especially offshore, but with emerging aid from advanced statistical methods, it may be possible to derive information regarding wind profiles using surface observations. In this study, two machine learning (ML) methods are developed for predictions of (1) coastal wind speed profiles and (2) low-level jets (LLJs) at three locations of high relevance to offshore wind energy deployment: the US Northeastern Atlantic Coastal Zone, the North Sea, and the Baltic Sea. The ML models are trained on multiple years of lidar profiles and utilize single-level ERA5 variables as input. The models output spatial predictions of coastal wind speed profiles and LLJ occurrence. A suite of nine ERA5 variables are considered for use in the study due to their physics-based relevance in coastal wind speed profile genesis and the possibility to observe these variables in real-time via measurements. The wind speed at 10 ma.s.l. and the surface sensible heat flux are shown to have the highest importance for both wind speed profile and LLJ predictions. Wind speed profile predictions output by the ML models exhibit similar root mean squared error (RMSE) with respect to observations as is found for ERA5 output. At typical hub heights, the ML models show lower RMSE than ERA5 indicating approximately 5 % RMSE reduction. LLJ identification scores are evaluated using the symmetric extremal dependence index (SEDI). LLJ predictions from the ML models outperform predictions from ERA5, demonstrating markedly higher SEDIs. However, optimization utilizing the SEDI results in a higher number of false alarms when compared to ERA5.
|
|
| 10. |
- Hallgren, Christoffer, et al.
(författare)
-
The smoother the better? : A comparison of six post-processing methods to improve short-term offshore wind power forecasts in the Baltic Sea
- 2021
-
Ingår i: Wind Energy Science. - : Copernicus Publications. - 2366-7443 .- 2366-7451. ; 6:5, s. 1205-1226
-
Tidskriftsartikel (refereegranskat)abstract
- With a rapidly increasing capacity of electricity generation from wind power, the demand for accurate power production forecasts is growing. To date, most wind power installations have been onshore and thus most studies on production forecasts have focused on onshore conditions. However, as offshore wind power is becoming increasingly popular it is also important to assess forecast quality in offshore locations. In this study, forecasts from the high-resolution numerical weather prediction model AROME was used to analyze power production forecast performance for an offshore site in the Baltic Sea. To improve the AROME forecasts, six post-processing methods were investigated and their individual performance analyzed in general as well as for different wind speed ranges, boundary layer stratifications, synoptic situations and in low-level jet conditions. In general, AROME performed well in forecasting the power production, but applying smoothing or using a random forest algorithm increased forecast skill. Smoothing the forecast improved the performance at all wind speeds, all stratifications and for all synoptic weather classes, and the random forest method increased the forecast skill during low-level jets. To achieve the best performance, we recommend selecting which method to use based on the forecasted weather conditions. Combining forecasts from neighboring grid points, combining the recent forecast with the forecast from yesterday or applying linear regression to correct the forecast based on earlier performance were not fruitful methods to increase the overall forecast quality.
|
|
| 11. |
- Ivanell, Stefan, 1974-, et al.
(författare)
-
Micro-scale model comparison (benchmark) at the moderately complex forested site Ryningsnäs
- 2018
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7443 .- 2366-7451. ; 3:2, s. 929-946
-
Tidskriftsartikel (refereegranskat)abstract
- This article describes a study in which modellers were challenged to compute the wind field at a forested site with moderately complex topography. The task was to model the wind field in stationary conditions with neutral stratification by using the wind velocity measured at 100 m at a metmast as the only reference. Detailed maps of terrain elevation and forest densities were provided as the only inputs, derived from airborne laser scans (ALSs) with a resolution of 10 m x 10 m covering an area of 50 km x 50 km, that closely match the actual forest and elevation of the site. The participants were free to apply their best practices for the simulation to decide the size of the domain, the value of the geostrophic wind, and every other modelling parameter. The comparison of the results with the measurements is shown for the vertical profiles of wind speed, shear, wind direction, and turbulent kinetic energy. The ALS-based data resulted in reasonable agreement of the wind profile and turbulence magnitude. The best performance was found to be that of large-eddy simulations using a very large domain. For the Reynolds-averaged Navier-Stokes type of models, the constants in the turbulence closure were shown to have a great influence on the yielded turbulence level, but were of much less importance for the wind speed profile. Of the variety of closure constants used by the participating modellers, the closure constants from Sogachev and Panferov (2006) proved to agree best with the measurements. Particularly the use of C-mu approximate to 0.03 in the k-epsilon model obtained better agreement with turbulence level measurements. All except two participating models used the full detailed ground and forest information to model the forest, which is considered significant progress compared to previous conventional approaches. Overall, the article gives an overview of how well different types of models are able to capture the flow physics at a moderately complex forested site.
|
|
| 12. |
- Juhl Andersen, Søren, et al.
(författare)
-
Global trends in the performance of large wind farms based on high-fidelity simulations
- 2020
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7443 .- 2366-7451. ; 5:4, s. 1689-1703
-
Tidskriftsartikel (refereegranskat)abstract
- A total of 18 high-fidelity simulations of large wind farms have been performed by three different institutions using various inflow conditions and simulation setups. The setups differ in how the atmospheric turbulence, wind shear and wind turbine rotors are modeled, encompassing a wide range of commonly used modeling methods within the large eddy simulation (LES) framework. Various turbine spacings, atmospheric turbulence intensity levels and incoming wind velocities are considered. The work performed is part of the International Energy Agency (IEA) wind task Wakebench and is a continuation of previously published results on the subject. This work aims at providing a methodology for studying the general flow behavior in large wind farms in a systematic way. It seeks to investigate and further understand the global trends in wind farm performance, with a focus on variability.Parametric studies first map the effect of various parameters on large aligned wind farms, including wind turbine spacing, wind shear and atmospheric turbulence intensity. The results are then aggregated and compared to engineering models as well as LES results from other investigations to provide an overall picture of how much power can be extracted from large wind farms operating below the rated level. The simple engineering models, although they cannot capture the variability features, capture the general trends well. Response surfaces are constructed based on the large number of aggregated LES data corresponding to a wide range of large wind farm layouts. The response surfaces form a basis for mapping the inherently varying power characteristics inside very large wind farms, including how much the turbines are able to exploit the turbulent fluctuations within the wind farms and estimating the associated uncertainty, which is valuable information useful for risk mitigation.
|
|
| 13. |
- Mohammadi, Mohammad Mehdi, et al.
(författare)
-
An actuator sector model for wind power applications : a parametric study
- 2024
-
Ingår i: Wind Energy Science. - : Copernicus Publications. - 2366-7443 .- 2366-7451. ; 9:6, s. 1305-1321
-
Tidskriftsartikel (refereegranskat)abstract
- This paper investigates different actuator sector model implementation alternatives and how they compare to actuator line results. The velocity sampling method, tip/smearing correction, and time step are considered. A good agreement is seen between the line and sector model in the rotor plane and the wake flow. Using the sector model, it was possible to reduce the computational time by 75 % compared to the actuator line model as it is possible to run the simulations with a larger time step without compromising the accuracy considerably. The results suggest that the proposed velocity sampling method produces the closest results to the line model with different tip speed ratios. Moreover, the vortex-based smearing correction applied to the sector model results in the lowest error values, among the considered methods, to correct the radial load distributions. Also, it is seen that reducing the time step compared to the one used for the actuator disc/sector does not provide an advantage considering the increased computational time.
|
|
| 14. |
- Molinder, Jennie, et al.
(författare)
-
Probabilistic forecasting of wind power production losses in cold climates : a case study
- 2018
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7443 .- 2366-7451. ; 3, s. 667-680
-
Tidskriftsartikel (refereegranskat)abstract
- The problem of icing on wind turbines in cold climates is addressed using probabilistic forecasting to improve next-day forecasts of icing and related production losses. A case study of probabilistic forecasts was generated for a 2-week period. Uncertainties in initial and boundary conditions are represented with an ensemble forecasting system, while uncertainties in the spatial representation are included with a neighbourhood method. Using probabilistic forecasting instead of one single forecast was shown to improve the forecast skill of the ice-related production loss forecasts and hence the icing forecasts. The spread of the multiple forecasts can be used as an estimate of the forecast uncertainty and of the likelihood for icing and severe production losses. Best results, both in terms of forecast skill and forecasted uncertainty, were achieved using both the ensemble forecast and the neighbourhood method combined. This demonstrates that the application of probabilistic forecasting for wind power in cold climates can be valuable when planning next-day energy production, in the usage of de-icing systems and for site safety.
|
|
| 15. |
- Muhle, Franz, et al.
(författare)
-
Blind test comparison on the wake behind a yawed wind turbine
- 2018
-
Ingår i: Wind Energy Science. - : COPERNICUS GESELLSCHAFT MBH. - 2366-7443 .- 2366-7451. ; 3:2, s. 883-903
-
Tidskriftsartikel (refereegranskat)abstract
- This article summarizes the results of the "Blind test 5" workshop, which was held in Visby, Sweden, in May 2017. This study compares the numerical predictions of the wake flow behind a model wind turbine operated in yaw to experimental wind tunnel results. Prior to the workshop, research groups were invited to predict the turbine performance and wake flow properties using computational fluid dynamics (CFD) methods. For this purpose, the power, thrust, and yaw moments for a 30 degrees yawed model turbine, as well as the wake's mean and turbulent streamwise and vertical flow components, were measured in the wind tunnel at the Norwegian University of Science and Technology (NTNU). In order to increase the complexity, a non-yawed downstream turbine was added in a second test case, while a third test case challenged the modelers with a new rotor and turbine geometry. Four participants submitted predictions using different flow solvers, three of which were based on large eddy simulations (LES) while another one used an improved delayed detached eddy simulation (IDDES) model. The performance of a single yawed turbine was fairly well predicted by all simulations, both in the first and third test cases. The scatter in the downstream turbine performance predictions in the second test case, however, was found to be significantly larger. The complex asymmetric shape of the mean streamwise and vertical velocities was generally well predicted by all the simulations for all test cases. The largest improvement with respect to previous blind tests is the good prediction of the levels of TKE in the wake, even for the complex case of yaw misalignment. These very promising results confirm the mature development stage of LES/DES simulations for wind turbine wake modeling, while competitive advantages might be obtained by faster computational methods.
|
|
| 16. |
- Simisiroglou, Nikolaos, et al.
(författare)
-
Validation of the actuator disc approach using small-scale model wind turbines
- 2017
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7443 .- 2366-7451. ; 2, s. 587-601
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the present study is the validation of the implementation of an actuator disc (ACD) model in the computational fluid dynamics (CFD) code PHOENICS. The flow behaviour for three wind turbine cases is investigated numerically and compared to wind tunnel measurements: (A) the flow around a single model wind turbine, (B) the wake interaction between two in-line model wind turbines for a uniform inflow of low turbulence intensity and (C) the wake interaction between two in-line model wind turbines at different separation distances in a uniform or sheared inflow of high turbulence intensity. This is carried out using Reynolds-averaged Navier–Stokes (RANS) simulations and an ACD technique in the CFD code PHOENICS. The computations are conducted for the design condition of the rotors using four different turbulence closure models and five different thrust distributions. The computed axial velocity field as well as the turbulence kinetic energy are compared with hot-wire anemometry (HWA) measurements. For the cases with two in-line wind turbines, the thrust coefficient is also computed and compared with measurements. The results show that for different inflow conditions and wind turbine spacings the proposed method is able to predict the overall behaviour of the flow with low computational effort. When using the k-ε and Kato–Launder k-ε turbulence models the results are generally in closer agreement with the measurements.
|
|
| 17. |
- Simisiroglou, Nikolaos, et al.
(författare)
-
Wind farm power production assessment : a comparative analysis of two actuator disc methods and two analytical wake models
- 2018
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7443 .- 2366-7451. ; 2018, s. 1-13
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The aim of the present study is to perform a comparative analysis of two actuator disc methods (ACD) and two analytical wake models for wind farm power production assessment. To do so wind turbine power production data from the Lillgrund offshore wind farm in Sweden is used. The measured power production for individual wind turbines is compared with results from simulations, done in the WindSim software, using two ACD methods (old and new) and two analytical wake models widely used within the wind industry (Jensen and Larsen wake models). It was found that the new ACD method and the Larsen model outperform the other method and model in most cases. Furthermore, results from the new ACD method show a clear improvement in the estimated power production in comparison to the old ACD method. The Jensen method seems to overestimate the power deficit for all cases. The new ACD method, despite it's simplicity, is capable of capturing the power production within the given error margin although it tends to underestimate the power deficit.
|
|
| 18. |
- Stammler, Matthias, et al.
(författare)
-
Friction torque of wind-turbine pitch bearings–comparison of experimental results with available models
- 2018
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7443 .- 2366-7451. ; 3, s. 97-105
-
Tidskriftsartikel (refereegranskat)abstract
- Pitch bearings of wind turbines are large, grease-lubricated rolling bearings that connect the rotor blades with the rotor hub. They are used to turn the rotor blades to control the power output and/or structural loads of the turbine. Common actuators turning the blades are hydraulic cylinders or electrical motor / gearbox combinations. In order to design pitch actuator systems that are able to turn the blades reliably without imposing an excessive power demand, it is necessary to predict the friction torque of pitch bearings for different operating conditions. In this paper, the results of torque measurements under load are presented and compared to results obtained using different calculation models. The results of this comparison indicate the various sources of friction that should be taken into account for a reliable calculation model.
|
|
| 19. |
- Yu, Quanjiang, 1990, et al.
(författare)
-
Optimal scheduling of the next preventive maintenance activity for a wind farm
- 2021
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7451 .- 2366-7443. ; 6:3, s. 949-959
-
Tidskriftsartikel (refereegranskat)abstract
- A large part of the operational cost for a wind power farm is due to the cost of equipment maintenance, especially for offshore wind farms. How to reduce the maintenance cost, and hence increase profitability, is this article’s focus. It presents a binary linear optimization model whose solution may suggest the wind turbine owners which components, and when, should undergo the next preventive maintenance (PM) replacements. The suggested short-term scheduling strategy takes into account eventual failure events of the multi-component system, in that after the failed system is repaired, the previously scheduled PM plan should be updated, assuming that the restored components are as good as new. The optimization algorithm of this paper, NextPM, is tested through numerical case studies applied to a four component model of a wind turbine. The first study addresses the important case of a single component system, used for parameter calibration purposes. The second study analyses the case of seasonal variations of mobilization costs, as compared to the constant mobilization cost setting. Among other things, this analysis reveals a 35% cost reduction achieved by the NextPM model, as compared to the pure corrective maintenance (CM) strategy. The third case study compares the NextPM model with another optimization model - the preventive maintenance scheduling problem with interval costs (PMSPIC), which was the major source of inspiration for this article. This comparison demonstrates that the NextPM model is accurate and much faster in terms of computational time.
|
|
| 20. |
- Yu, Quanjiang, et al.
(författare)
-
Optimal scheduling of the next preventive maintenance activity for a wind farm
- 2021
-
Ingår i: Wind Energy Science. - : Copernicus GmbH. - 2366-7443 .- 2366-7451. ; 6:3, s. 949-959
-
Tidskriftsartikel (refereegranskat)abstract
- A large part of the operational cost for a wind farm is due to the cost of equipment maintenance, especially for offshore wind farms. How to reduce the maintenance cost, and hence increase profitability, is this article's focus. It presents a binary linear optimization model whose solution may inform the wind turbine owners about which components, and when, should undergo the next preventive maintenance (PM) replacements. The suggested short-term scheduling strategy takes into account eventual failure events of the multi-component system - in that after the failed system is repaired, the previously scheduled PM plan should be updated, assuming that the restored components are as good as new. The optimization algorithm of this paper, NextPM, is tested through numerical case studies applied to a four-component model of a wind turbine. The first study addresses the important case of a single component system, used for parameter calibration purposes. The second study analyses the case of seasonal variations of mobilization costs, as compared to the constant mobilization cost setting. Among other things, this analysis reveals a 35% cost reduction achieved by the NextPM model, as compared to the pure corrective maintenance (CM) strategy. The third case study compares the NextPM model with another optimization model - the preventive maintenance scheduling problem with interval costs (PMSPIC), which was the major source of inspiration for this article. This comparison demonstrates that the NextPM model is accurate and much faster in terms of computational time.
|
|
| 21. |
- Zhao, Jian, 1988, et al.
(författare)
-
Electrostatic discharge impacts on the main shaft bearings of wind turbines
- 2023
-
Ingår i: Wind Energy Science. - 2366-7451 .- 2366-7443. ; 8:12, s. 1809-1819
-
Tidskriftsartikel (refereegranskat)abstract
- This paper studies the electrostatic discharge effect in wind turbines, a possible trigger source of the main bearing current. A lab setup with a charge generator and downsized wind turbine was built to verify the impact of electrostatic discharge on the main bearing current. In the test, a fatal amplitude for the bearing current was found at only −93 mV driven voltage on the shaft. Compared with the bearing current driven by the common-mode voltage, the electrostatic discharge effect triggers the bearing breakdown at a lower shaft voltage but much higher bearing current amplitude. The results demonstrate that the electrostatic discharge effect is a pattern of the bearing current in wind turbines and is much more dangerous to the bearing.
|
|
