| 1. |
- Brynolf, Selma, 1984, et al.
(författare)
-
Review of electrofuel feasibility—prospects for road, ocean, and air transport
- 2022
-
Ingår i: Progress in Energy. - : IOP Publishing. - 2516-1083. ; 4:4, s. 042007-042007
-
Tidskriftsartikel (refereegranskat)abstract
- To meet climate targets the emissions of greenhouse gases from transport need to be reduced considerably.Electrofuels (e-fuels) produced from low-CO2 electricity, water, and carbon (or nitrogen) are potential low-climate-impact transportation fuels. The purpose of this review is to provide a technoeconomic assessment of the feasibility and potential of e-fuels for road, ocean, and air transport.The assessment is based on a review of publications discussing e-fuels for one or more transport modes. For each transport mode, (a) e-fuel options are mapped, (b) cost per transport unit (e.g. vehicle km) and carbon abatement costs are estimated and compared to conventional options, (c) prospects and challenges are highlighted, and (d) policy context is described.Carbon abatement costs for e-fuels (considering vehicle cost, fuel production and distribution cost) are estimated to be in the range 110–1250 € tonne−1 CO2 with e-gasoline and e-diesel at the high end of the range.The investigated combined biofuel and e-fuels production pathways (based on forest residues and waste) are more cost-competitive than the stand-alone e-fuel production pathways, but the global availability of sustainable biomass is limited making these pathways more constrained.While the potential for e-fuels to decarbonize the transport sector has been discussed extensively in the literature, many uncertainties in terms of production costs, vehicle costs and environmental performance remain. It is too early to rule out or strongly promote particular e-fuels for different transport modes. For e-fuels to play a significant role in transportation, their attractiveness relative to other transport options needs to be improved. Incentives will be needed for e-fuels to be cost-effective and increased clarity on how e-fuels are linked to existing policies is needed.
|
|
| 2. |
- Cuevas, Fermin, et al.
(författare)
-
Metallic and complex hydride-based electrochemical storage of energy
- 2022
-
Ingår i: Progress in Energy. - : IOP Publishing. - 2516-1083. ; 4:3
-
Tidskriftsartikel (refereegranskat)abstract
- The development of efficient storage systems is one of the keys to the success of the energy transition. There are many ways to store energy, but among them, electrochemical storage is particularly valuable because it can store electrons produced by renewable energies with a very good efficiency. However, the solutions currently available on the market remain unsuitable in terms of storage capacity, recharging kinetics, durability, and cost. Technological breakthroughs are therefore expected to meet the growing need for energy storage. Within the framework of the Hydrogen Technology Collaboration Program - H2TCP Task-40, IEA's expert researchers have developed innovative materials based on hydrides (metallic or complex) offering new solutions in the field of solid electrolytes and anodes for alkaline and ionic batteries. This review presents the state of the art of research in this field, from the most fundamental aspects to the applications in battery prototypes.
|
|
| 3. |
|
|
| 4. |
- Hansson, Julia, et al.
(författare)
-
Review of electrofuel feasibility - cost and environmental impact
- 2022
-
Ingår i: Progress in Energy. - Stockholm : IOP Publishing. - 2516-1083. ; A:2595
-
Tidskriftsartikel (refereegranskat)abstract
- Electrofuels, fuels produced from electricity, water, and carbon or nitrogen, are of interest assubstitutes for fossil fuels in all energy and chemical sectors. This paper focuses on electrofuels for transportation, where some can be used in existing vehicle/vessel/aircraft fleets and fueling infrastructure.The aim of this study is to review publications on electrofuels and summarize costs and environmental performance. A special case, denoted as bio-electrofuels, involves hydrogen supplementing existing biomethane production (e.g. anaerobic digestion) to generate additional or different fuels. We use costs, identified in the literature, to calculate harmonized production costs for a range of electrofuels and bio-electrofuels.Results from the harmonized calculations show that bio-electrofuels generally have lower costs than electrofuels produced using captured carbon. Lowest costs are found for liquefied bio-electro-methane, bio-electro-methanol, and bio-electro-dimethyl ether. The highest cost is for electro-jet fuel. All analyzed fuels have the potential for long-term production costs in the range 90–160 € per MWh. Dominant factors impacting production costs are electrolyzer and electricity costs, the latter connected to capacity factors (CFs) and cost for hydrogen storage. Electrofuel production costs also depend on regional conditions for renewable electricity generation, which are analyzed in sensitivity analyses usingcorresponding CFs in four European regions.Results show a production cost range forelectro-methanol of 76–118 € per MWh depending on scenario and region assuming an electrolyzer CAPEX of 300–450 € per kWelec and CFs of 45%–65%. Lowest production costs are found in regions with good conditions for renewable electricity, such as Ireland and western Spain. The choice of system boundary has a large impact on the environmental assessments. The literature is not consistent regarding the environmental impact from different CO2 sources. The literature, however, points to the fact that renewable energy sources are required to achieve low global warming impact over the electrofuel life cycle.
|
|
| 5. |
- Pasquini, Luca, et al.
(författare)
-
Magnesium- and intermetallic alloys-based hydrides for energy storage : modelling, synthesis and properties
- 2022
-
Ingår i: Progress in Energy. - : Institute of Physics Publishing (IOPP). - 2516-1083. ; 4:3
-
Forskningsöversikt (refereegranskat)abstract
- Hydrides based on magnesium and intermetallic compounds provide a viable solution to the challenge of energy storage from renewable sources, thanks to their ability to absorb and desorb hydrogen in a reversible way with a proper tuning of pressure and temperature conditions. Therefore, they are expected to play an important role in the clean energy transition and in the deployment of hydrogen as an efficient energy vector. This review, by experts of Task 40 'Energy Storage and Conversion based on Hydrogen' of the Hydrogen Technology Collaboration Programme of the International Energy Agency, reports on the latest activities of the working group 'Magnesium- and Intermetallic alloys-based Hydrides for Energy Storage'. The following topics are covered by the review: multiscale modelling of hydrides and hydrogen sorption mechanisms; synthesis and processing techniques; catalysts for hydrogen sorption in Mg; Mg-based nanostructures and new compounds; hydrides based on intermetallic TiFe alloys, high entropy alloys, Laves phases, and Pd-containing alloys. Finally, an outlook is presented on current worldwide investments and future research directions for hydrogen-based energy storage.
|
|
| 6. |
- Yeh, Sonia, 1973, et al.
(författare)
-
Improving future travel demand projections: a pathway with an open science interdisciplinary approach
- 2022
-
Ingår i: Progress in Energy. - : IOP Publishing. - 2516-1083. ; 4:4
-
Tidskriftsartikel (refereegranskat)abstract
- Transport accounts for 24% of global CO2 emissions from fossil fuels. Governments face challenges in developing feasible and equitable mitigation strategies to reduce energy consumption and manage the transition to low-carbon transport systems. To meet the local and global transport emission reduction targets, policymakers need more realistic/sophisticated future projections of transport demand to better understand the speed and depth of the actions required to mitigate greenhouse gas emissions. In this paper, we argue that the lack of access to high-quality data on the current and historical travel demand and interdisciplinary research hinders transport planning and sustainable transitions toward low-carbon transport futures. We call for a greater interdisciplinary collaboration agenda across open data, data science, behaviour modelling, and policy analysis. These advancemets can reduce some of the major uncertainties and contribute to evidence-based solutions toward improving the sustainability performance of future transport systems. The paper also points to some needed efforts and directions to provide robust insights to policymakers. We provide examples of how these efforts could benefit from the International Transport Energy Modeling Open Data project and open science interdisciplinary collaborations.
|
|
| 7. |
- Zeng, Ziling, 1995, et al.
(författare)
-
Limitations and suggestions of electric transit charge scheduling
- 2022
-
Ingår i: Progress in Energy. - : IOP Publishing. - 2516-1083. ; 4:2
-
Tidskriftsartikel (refereegranskat)abstract
- A major factor hindering the popularization of electric buses (EBs) in the current automotive market is the high ownership cost of batteries and its significant upfront investment. For the daily maintenance of electric fleets, the amortized battery replacement cost is at least six times the charging cost. Thus, ensuring the healthy operation of the battery and prolonging the cycle life are some of the most concerned issues of the bus operators. In order to achieve the best operating mode, the operators are required to formulate an effective charging schedule with minimized battery wear. However, little quantitative formulation exists in prior literature to consider battery wear in bus charge scheduling. In this paper, a general formula is presented for battery wear cost consideration in charge scheduling based on the emerging literature. Then, the existing charge scheduling model is improved based on the proposed approach. A case study illustrates the significant difference in operating costs between charging plans developed with or without consideration of battery wear. The focus of this commentary is to present the crucial factors to improve the efficiency of EB operations and help make the charge scheduling models more realistic.
|
|
