| 1. |
- Dollmann, Antje, et al.
(författare)
-
Deformation twins as a probe for tribologically induced stress states
- 2024
-
Ingår i: Communications Materials. - 2662-4443. ; 5:1
-
Tidskriftsartikel (refereegranskat)abstract
- Friction and wear of metals are critically influenced by the microstructures of the bodies constituting the tribological contact. Understanding the microstructural evolution taking place over the lifetime of a tribological system therefore is crucial for strategically designing tribological systems with tailored friction and wear properties. Here, we focus on the single-crystalline High-Entropy Alloy CoCrFeMnNi that is prone to form twins at room temperature. Deformation twins feature a pronounced orientation dependence with a tension-compression anisotropy, a distinct strain release in an extended volume and robust onset stresses. This makes deformation twinning an ideal probe to experimentally investigate the complex stress fields occurring in a tribological contact. Our results unambiguously show a grain orientation dependence of twinning under tribological load. It is clearly shown, that twinning cannot be attributed to a single crystal direction parallel to a sample coordinate axes. With deformation twins in the microstructure, stress field models can be validated to make them useable for all different tribological systems.
|
|
| 2. |
- Duan, Shanghong, 1992, et al.
(författare)
-
Three-dimensional reconstruction and computational analysis of a structural battery composite electrolyte
- 2023
-
Ingår i: COMMUNICATIONS MATERIALS. - : Springer Nature. - 2662-4443. ; 4:1
-
Tidskriftsartikel (refereegranskat)abstract
- Structural batteries are multifunctional composite materials that can carry mechanical load and store electrical energy. Their multifunctionality requires an ionically conductive and stiff electrolyte matrix material. For this purpose, a bi-continuous polymer electrolyte is used where a porous solid phase holds the structural integrity of the system, and a liquid phase, which occupies the pores, conducts lithium ions. To assess the porous structure, three-dimensional topology information is needed. Here we study the three-dimensional structure of the porous battery electrolyte material using combined focused ion beam and scanning electron microscopy and transfer into finite element models. Numerical analyses provide predictions of elastic modulus and ionic conductivity of the bi-continuous electrolyte material. Characterization of the three-dimensional structure also provides information on the diameter and volume distributions of the polymer and pores, as well as geodesic tortuosity. Structural battery composites contain a porous solid phase that holds the structural integrity of the system with a liquid phase in the pores. Here, the porous structure is studied using combined focused ion beam and scanning electron microscopy and transferred into finite element models.
|
|
| 3. |
- Dzhigaev, Dmitry, et al.
(författare)
-
Three-dimensional in situ imaging of single-grain growth in polycrystalline In2O3:Zr films
- 2022
-
Ingår i: Communications Materials. - : Springer Science and Business Media LLC. - 2662-4443. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Strain and interactions at grain boundaries during solid-phase crystallization are known to play a significant role in the functional properties of polycrystalline materials. However, elucidating three-dimensional nanoscale grain morphology, kinetics, and strain under realistic conditions is challenging. Here, we image a single-grain growth during the amorphous-to-polycrystalline transition in technologically relevant transparent conductive oxide film of In2O3:Zr with in situ Bragg coherent X-ray diffraction imaging and transmission electron microscopy. We find that the Johnson-Mehl-Avrami-Kolmogorov theory, which describes the average kinetics of polycrystalline films growth, can be applied to the single grains as well. The quantitative analysis stems directly from imaging results. We elucidate the interface-controlled nature of the single-grain growth in thin films and reveal the surface strains which may be a driving force for anisotropic crystallization rates. Our results bring in situ imaging with coherent X-rays towards understanding and controlling the crystallization processes of transparent conductive oxides and other polycrystalline materials at the nanoscale.
|
|
| 4. |
- Errandonea, Daniel, et al.
(författare)
-
Experimental and theoretical confirmation of an orthorhombic phase transition in niobium at high pressure and temperature
- 2020
-
Ingår i: COMMUNICATIONS MATERIALS. - : Springer Nature. - 2662-4443. ; 1:1
-
Tidskriftsartikel (refereegranskat)abstract
- Compared to other body-centered cubic (bcc) transition metals, Nb has been the subject of fewer compression studies and there are still aspects of its phase diagram which are unclear. Here, we report a combined theoretical and experimental study of Nb under high pressure and temperature. We present the results of static laser-heated diamond anvil cell experiments up to 120 GPa using synchrotron-based fast x-ray diffraction combined with ab initio quantum molecular dynamics simulations. The melting curve of Nb is determined and evidence for a solid-solid phase transformation in Nb with increasing temperature is found. The high-temperature phase of Nb is orthorhombic Pnma. The bcc-Pnma transition is clearly seen in the experimental data on the Nb principal Hugoniot. The bcc-Pnma coexistence observed in our experiments is explained. Agreement between the measured and calculated melting curves is very good except at 40-60 GPa where three experimental points lie below the theoretical melting curve by 250 K (or 7%); a possible explanation is given. The study of materials under extreme conditions can reveal interesting physics in diverse areas such as condensed matter and geophysics. Here, the authors investigate experimentally and theoretically the high pressure-high temperature phase diagram of niobium revealing a previously unobserved phase transition from body-centered cubic to orthorhombic phase.
|
|
| 5. |
- Greco, Gabriele, et al.
(författare)
-
Tyrosine residues mediate supercontraction in biomimetic spider silk
- 2021
-
Ingår i: Communications materials. - : Springer Science and Business Media LLC. - 2662-4443. ; 2:1
-
Tidskriftsartikel (refereegranskat)abstract
- Exposing spider silk to wet conditions can cause supercontraction. Here, tyrosine amino acid residues within the amorphous regions are found to contribute to supercontraction, which can be controlled by protein engineering. Water and humidity severely affect the material properties of spider major ampullate silk, causing the fiber to become plasticized, contract, swell and undergo torsion. Several amino acid residue types have been proposed to be involved in this process, but the complex composition of the native fiber complicates detailed investigations. Here, we observe supercontraction in biomimetically produced artificial spider silk fibers composed of defined proteins. We found experimental evidence that proline is not the sole residue responsible for supercontraction and that tyrosine residues in the amorphous regions of the silk fiber play an important role. Furthermore, we show that the response of artificial silk fibers to humidity can be tuned, which is important for the development of materials for applications in wet environments, eg producing water resistant fibers with maximal strain at break and toughness modulus.
|
|
| 6. |
- Karki, Akchheta, et al.
(författare)
-
Doped semiconducting polymer nanoantennas for tunable organic plasmonics
- 2022
-
Ingår i: Communications Materials. - : Springer Nature. - 2662-4443. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical nanoantennas based on organic plasmonics are promising for their higher degree of tunability over metallic nanostructures. Here, nanodisks of polythiophene-based semiconducting polymers provide nanooptical antennas with resonances that are tunable over a 1000 nm wavelength range and can be switched off or on by doping modulation. Optical nanoantennas are often based on plasmonic resonances in metal nanostructures, but their dynamic tunability is limited due to the fixed permittivity of conventional metals. Recently, we introduced PEDOT-based conducting polymers as an alternative materials platform for dynamic plasmonics and metasurfaces. Here, we expand dynamic organic plasmonic systems to a wider class of doped polythiophene-based semiconducting polymers. We present nanodisks of PBTTT semiconducting polymer doped with a dicationic salt, enabling a high doping level of around 0.8 charges per monomer, and demonstrate that they can be used as nanooptical antennas via redox-tunable plasmonic resonances. The resonances arise from the polymer being optically metallic in its doped state and dielectric in its non-conducting undoped state. The plasmonic resonances are controllable over a 1000 nm wavelength range by changing the dimensions of the nanodisks. Furthermore, the optical response of the nanoantennas can be reversibly tuned by modulating the doping level of the polymer. Simulations corroborate the experimental results and reveal the possibility to also modulate the optical nearfield response of the nanoantennas.
|
|
| 7. |
- Kore, Bhushan P., et al.
(författare)
-
Moisture tolerant solar cells by encapsulating 3D perovskite with long-chain alkylammonium cation-based 2D perovskite
- 2021
-
Ingår i: Communications Materials. - : Springer Nature. - 2662-4443. ; 2:1
-
Tidskriftsartikel (refereegranskat)abstract
- Long-term stability is an essential requirement for perovskite solar cells to be commercially viable. Encapsulating 3D perovskites with 2D perovskite structures is an effective strategy for improving resistance to moisture. However, long-chain alkylammonium cation-based 2D perovskites have been rarely studied in solar cells. Here, we study three different alkyl chain length organic cation-based 2D perovskite coatings for 3D perovskites. The 2D perovskite incorporated solar cells show significant improvement in solar cell stability with limited compromise in solar cell efficiency, with the longest alkyl chain length sample showing only a 20% drop in power conversion efficiency after 6 months at a relative humidity of 25-80%, and could be completely immersed in water for a few minutes before degradation started. The 2D perovskite coating also mitigated non-radiative recombination in the light-absorbing 3D perovskite, leading to an enhancement in the open circuit voltage. These findings suggest that long-chain alkylammonium cation based 2D perovskites can improve the environmental stability of 3D based perovskites without significant losses to device performance. Moisture resistance is vital for commercializing perovskite solar cells. Here, long-chain alkylammonium cation-based 2D perovskites are used to coat 3D perovskite, enabling stable performance for six months with only a 20 % drop in power conversion efficiency.
|
|
| 8. |
- Meng, Lingyin, et al.
(författare)
-
A conducting polymer-based array with multiplex sensing and drug delivery capabilities for smart bandages
- 2024
-
Ingår i: COMMUNICATIONS MATERIALS. - : SPRINGERNATURE. - 2662-4443. ; 5:1
-
Tidskriftsartikel (refereegranskat)abstract
- Effective individual wound management, particularly in cases of prolonged healing and increased infection vulnerability, has prompted the development of wound theranostics, combining real-time diagnostic assessment and on-demand treatment. Here, we present a multifunctional conducting polymer-based smart theranostic bandage that integrates pH sensing, pH-compensated uric acid (UA) biosensing, and on-demand antibiotic release using different conducting polymers, each leveraging their advantageous intrinsic properties. Specifically, the polyaniline-based pH sensor operates reversibly across a pH range of 4-10, while the functionalized poly(3,4-ethylenedioxythiophene)-based UA biosensor exhibits a linear response up to 0.9 mM UA. Simultaneous detection of pH and UA allows accurate UA determination via pH compensation. Upon detecting abnormal pH/UA levels, the polypyrrole-based drug carrier releases ciprofloxacin via 0.6 V electrical stimulation, successfully inhibiting bacterial growth in vitro. The array is assembled as a 3D patch, connected to a flexible printed circuit board, and embedded in a wound bandage, offering potential for remote wound monitoring, targeted treatment, and wireless wound management. Smart devices for wound management combine biosensing with drug release. Here, a smart theranostic bandage is reported that can detect pH and uric acid levels and release antibiotics as necessary, all of which can be done remotely.
|
|
| 9. |
- Nocerino, E., et al.
(författare)
-
Competition between magnetic interactions and structural instabilities leading to itinerant frustration in the triangular lattice antiferromagnet LiCrSe 2
- 2023
-
Ingår i: Communications Materials. - 2662-4443. ; 4:1
-
Tidskriftsartikel (refereegranskat)abstract
- LiCrSe2 constitutes a recent valuable addition to the ensemble of two-dimensional triangular lattice antiferromagnets. In this work, we present a comprehensive study of the low temperature nuclear and magnetic structure established in this material. Being subject to a strong magnetoelastic coupling, LiCrSe2 was found to undergo a first order structural transition from a trigonal crystal system (P3 ¯ m1) to a monoclinic one (C2/m) at T s = 30 K. Such restructuring of the lattice is accompanied by a magnetic transition at T N = 30 K. Refinement of the magnetic structure with neutron diffraction data and complementary muon spin rotation analysis reveal the presence of a complex incommensurate magnetic structure with a up-up-down-down arrangement of the chromium moments with ferromagnetic double chains coupled antiferromagnetically. The spin axial vector is also modulated both in direction and modulus, resulting in a spin density wave-like order with periodic suppression of the chromium moment along the chains. This behavior is believed to appear as a result of strong competition between direct exchange antiferromagnetic and superexchange ferromagnetic couplings established between both nearest neighbor and next nearest neighbor Cr3+ ions. We finally conjecture that the resulting magnetic order is stabilized via subtle vacancy/charge order within the lithium layers, potentially causing a mix of two co-existing magnetic phases within the sample.
|
|
| 10. |
- Nocerino, Elisabetta, et al.
(författare)
-
Competition between magnetic interactions and structural instabilities leading to itinerant frustration in the triangular lattice antiferromagnet LiCrSe2
- 2023
-
Ingår i: Communications Materials. - : Springer Nature. - 2662-4443. ; 4:1
-
Tidskriftsartikel (refereegranskat)abstract
- LiCrSe2 constitutes a recent valuable addition to the ensemble of two-dimensional triangular lattice antiferromagnets. In this work, we present a comprehensive study of the low temperature nuclear and magnetic structure established in this material. Being subject to a strong magnetoelastic coupling, LiCrSe2 was found to undergo a first order structural transition from a trigonal crystal system (P3 ¯ m1) to a monoclinic one (C2/m) at T s = 30 K. Such restructuring of the lattice is accompanied by a magnetic transition at T N = 30 K. Refinement of the magnetic structure with neutron diffraction data and complementary muon spin rotation analysis reveal the presence of a complex incommensurate magnetic structure with a up-up-down-down arrangement of the chromium moments with ferromagnetic double chains coupled antiferromagnetically. The spin axial vector is also modulated both in direction and modulus, resulting in a spin density wave-like order with periodic suppression of the chromium moment along the chains. This behavior is believed to appear as a result of strong competition between direct exchange antiferromagnetic and superexchange ferromagnetic couplings established between both nearest neighbor and next nearest neighbor Cr3+ ions. We finally conjecture that the resulting magnetic order is stabilized via subtle vacancy/charge order within the lithium layers, potentially causing a mix of two co-existing magnetic phases within the sample.
|
|
| 11. |
- Nocerino, Elisabetta, et al.
(författare)
-
Multiple unconventional charge density wave transitions in LaPt2Si2 superconductor clarified with high-energy X-ray diffraction
- 2023
-
Ingår i: Communications Materials. - : Springer Nature. - 2662-4443. ; 4:1
-
Tidskriftsartikel (refereegranskat)abstract
- The quasi-2D platinum-based rare earth intermetallic LaPt2Si2 has attracted attention as it exhibits strong interplay between charge density wave order and superconductivity. However, most of the results reported on this material come from theoretical calculations, preliminary bulk investigations and powder samples, which makes it difficult to uniquely determine the temperature evolution of its crystal structure and, consequently, of its charge density wave transition. Therefore, the published literature around LaPt2Si2 is often controversial. Here, by means of high-resolution synchrotron X-ray diffraction data, we clarify some of the poorly or partially understood aspects of the physics of LaPt2Si2. In particular, we resolve the complex evolution of its crystal structure and superstructures, identifying the temperature dependence of multiple density wave transitions in good quality LaPt2Si2 single crystals. According to our findings, on cooling from room temperature LaPt2Si2 undergoes a series of subtle structural transitions which can be summarised as follows: second order commensurate tetragonal (P4/n m m)-to-incommensurate structure followed by a first order incommensurate-to-commensurate orthorhombic (P m m n) transition and then a first order commensurate orthorhombic (P m m n)-to-commensurate tetragonal (P4/n m m). The structural transitions are accompanied by both incommensurate and commensurate superstructural distortions of the lattice. The observed behavior is compatible with discommensuration of the CDW in this material.
|
|
| 12. |
- Schmuck, Benjamin, et al.
(författare)
-
Impact of physio-chemical spinning conditions on the mechanical properties of biomimetic spider silk fibers
- 2022
-
Ingår i: Communications Materials. - : Springer Science and Business Media LLC. - 2662-4443. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- Artificial spider silk has emerged as a biobased fiber that could replace some petroleum-based materials that are on the market today. Recent progress made it possible to produce the recombinant spider silk protein NT2RepCT at levels that would make the commercialization of fibers spun from this protein economically feasible. However, for most applications, the mechanical properties of the artificial silk fibers need to be improved. This could potentially be achieved by redesigning the spidroin, and/or by changing spinning conditions. Here, we show that several spinning parameters have a significant impact on the fibers' mechanical properties by tensile testing more than 1000 fibers produced under 92 different conditions. The most important factors that contribute to increasing the tensile strength are fast reeling speeds and/or employing post-spin stretching. Stretching in combination with optimized spinning conditions results in fibers with a strength of >250 MPa, which is the highest reported value for fibers spun using natively folded recombinant spidroins that polymerize in response to shear forces and lowered pH.The mechanical properties of spider silk are known to be dependent on spinning conditions. Here, the tensile behavior of over 1000 biomimetic spider silk fibers spun under 92 different conditions are tested, resulting in a yield strength of more than 250 MPa.
|
|
| 13. |
- Steinhauer, Stephan, et al.
(författare)
-
Rydberg excitons in Cu2O microcrystals grown on a silicon platform
- 2020
-
Ingår i: Communications Materials. - : Springer Nature. - 2662-4443. ; 1:1
-
Tidskriftsartikel (refereegranskat)abstract
- Cuprous oxide (Cu2O) is a semiconductor with large exciton binding energy and significant technological importance in applications such as photovoltaics and solar water splitting. It is also a superior material system for quantum optics that enabled the observation of intriguing phenomena, such as Rydberg excitons as solid-state analogue to highly-excited atomic states. Previous experiments related to excitonic properties focused on natural bulk crystals due to major difficulties in growing high-quality synthetic samples. Here, the growth of Cu2O microcrystals with excellent optical material quality and very low point defect levels is presented. A scalable thermal oxidation process is used that is ideally suited for integration on silicon, demonstrated by on-chip waveguide-coupled Cu2O microcrystals. Moreover, Rydberg excitons in site-controlled Cu2O microstructures are shown, relevant for applications in quantum photonics. This work paves the way for the wide-spread use of Cu2O in optoelectronics and for the development of novel device technologies. Cu2O is of great interest for its excitonic properties, yet challenges in its fabrication means that most experiments focus on naturally occurring samples. Here, scalable thermal oxidation is reported for the growth of Cu2O with low-defect content, allowing the observation of Rydberg excitons.
|
|
