| 1. |
- Akinbomi, J G, et al.
(författare)
-
Current challenges of high-solid anaerobic digestion and possible measures for its effective applications : a review
- 2022
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Nature. - 2731-3654. ; 15:1
-
Forskningsöversikt (refereegranskat)abstract
- The attention that high solids anaerobic digestion process (HS-AD) has received over the years, as a waste management and energy recovery process when compared to low solids anaerobic digestion process, can be attributed to its associated benefits including water conservation and smaller digester foot print. However, high solid content of the feedstock involved in the digestion process poses a barrier to the process stability and performance if it is not well managed. In this review, various limitations to effective performance of the HS-AD process, as well as, the possible measures highlighted in various research studies were garnered to serve as a guide for effective industrial application of this technology. A proposed design concept for overcoming substrate and product inhibition thereby improving methane yield and process stability was recommended for optimum performance of the HS-AD process.
|
|
| 2. |
- Averheim, Andreas, et al.
(författare)
-
Separate hydrolysis and fermentation of softwood bark pretreated with 2-naphthol by steam explosion
- 2024
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : BioMed Central (BMC). - 2731-3654. ; 17:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: 2-Naphthol, a carbocation scavenger, is known to mitigate lignin condensation during the acidic processing of lignocellulosic biomass, which may benefit downstream processing of the resulting materials. Consequently, various raw materials have demonstrated improved enzymatic saccharification yields for substrates pretreated through autohydrolysis and dilute acid hydrolysis in the presence of 2-naphthol. However, 2-naphthol is toxic to ethanol-producing organisms, which may hinder its potential application. Little is known about the implications of 2-naphthol in combination with the pretreatment of softwood bark during continuous steam explosion in an industrially scalable system.Results: The 2-naphthol-pretreated softwood bark was examined through spectroscopic techniques and subjected to separate hydrolysis and fermentation along with a reference excluding the scavenger and a detoxified sample washed with ethanol. The extractions of the pretreated materials with water resulted in a lower aromatic content in the extracts and stronger FTIR signals, possibly related to guaiacyl lignin, in the nonextractable residue when 2-naphthol was used during pretreatment. In addition, cyclohexane/acetone (9:1) extraction revealed the presence of pristine 2-naphthol in the extracts and increased aromatic content of the nonextractable residue detectable by NMR for the scavenger-pretreated materials. Whole-slurry enzymatic saccharification at 12% solids loading revealed that elevated saccharification recoveries after 48 h could not be achieved with the help of the scavenger. Glucose concentrations of 16.9 (reference) and 15.8 g/l (2-naphthol) could be obtained after 48 h of hydrolysis. However, increased inhibition during fermentation of the scavenger-pretreated hydrolysate, indicated by yeast cell growth, was slight and could be entirely overcome by the detoxification stage. The ethanol yields from fermentable sugars after 24 h were 0.45 (reference), 0.45 (2-naphthol), and 0.49 g/g (2-naphthol, detoxified).Conclusion: The carbocation scavenger 2-naphthol did not increase the saccharification yield of softwood bark pretreated in an industrially scalable system for continuous steam explosion. On the other hand, it was shown that the scavenger's inhibitory effects on fermenting microorganisms can be overcome by controlling the pretreatment conditions to avoid cross-inhibition or detoxifying the substrates through ethanol washing. This study underlines the need to jointly optimize all the main processing steps.
|
|
| 3. |
- Caputo, Fabio, 1996, et al.
(författare)
-
Investigating the role of AA9 LPMOs in enzymatic hydrolysis of differentially steam-pretreated spruce
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: To realize the full potential of softwood-based forest biorefineries, the bottlenecks of enzymatic saccharification of softwood need to be better understood. Here, we investigated the potential of lytic polysaccharide monooxygenases (LPMO9s) in softwood saccharification. Norway spruce was steam-pretreated at three different severities, leading to varying hemicellulose retention, lignin condensation, and cellulose ultrastructure. Hydrolyzability of the three substrates was assessed after pretreatment and after an additional knife-milling step, comparing the efficiency of cellulolytic Celluclast + Novozym 188 and LPMO-containing Cellic CTec2 cocktails. The role of Thermoascus aurantiacus TaLPMO9 in saccharification was assessed through time-course analysis of sugar release and accumulation of oxidized sugars, as well as wide-angle X-ray scattering analysis of cellulose ultrastructural changes. Results: Glucose yield was 6% (w/w) with the mildest pretreatment (steam pretreatment at 210 °C without catalyst) and 66% (w/w) with the harshest (steam pretreatment at 210 °C with 3%(w/w) SO2) when using Celluclast + Novozym 188. Surprisingly, the yield was lower with all substrates when Cellic CTec2 was used. Therefore, the conditions for optimal LPMO activity were tested and it was found that enough O2 was present over the headspace and that the reducing power of the lignin of all three substrates was sufficient for the LPMOs in Cellic CTec2 to be active. Supplementation of Celluclast + Novozym 188 with TaLPMO9 increased the conversion of glucan by 1.6-fold and xylan by 1.5-fold, which was evident primarily in the later stages of saccharification (24–72 h). Improved glucan conversion could be explained by drastically reduced cellulose crystallinity of spruce substrates upon TaLPMO9 supplementation. Conclusion: Our study demonstrated that LPMO addition to hydrolytic enzymes improves the release of glucose and xylose from steam-pretreated softwood substrates. Furthermore, softwood lignin provides enough reducing power for LPMOs, irrespective of pretreatment severity. These results provided new insights into the potential role of LPMOs in saccharification of industrially relevant softwood substrates.
|
|
| 4. |
- Chen, Jingjing, et al.
(författare)
-
Heat-transfer performance of twisted tubes for highly viscous food waste slurry from biogas plants
- 2022
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Nature. - 2731-3654. ; 15
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The use of food waste as feedstock shows high production of biogas via anaerobic digestion, but requires efficient heat transfer in food waste slurry at heating and cooling processes. The lack of rheological properties hampered the research on the heat-transfer process for food waste slurry. Referentially, the twisted hexagonal and elliptical rubes have been proved as the optimal enhanced geometry for heat transfer of medium viscous slurries with non-Newtonian behavior and Newtonian fluids, respectively. It remains unknown whether improvements can be achieved by using twisted geometries in combination with food waste slurry in processes including heating and cooling.Results: Food waste slurry was observed to exhibit highly viscous, significant temperature-dependence, and strongly shear-thinning rheological characteristics. Experiments confirmed the heat-transfer enhancement of twisted hexagonal tubes for food waste slurry and validated the computational fluid dynamics-based simulations with an average deviation of 14.2%. Twisted hexagonal tubes were observed to be more effective at low-temperature differences and possess an enhancement factor of up to 2.75; while twisted elliptical tubes only exhibited limited heat-transfer enhancement at high Reynolds numbers. The heat-transfer enhancement achieved by twisted hexagonal tubes was attributed to the low dynamic viscosity in the boundary layer induced by the strong and continuous shear effect near the walls of the tube.Conclusions: This study determined the rheological properties of food waste slurry, confirmed the heat-transfer enhancement of the twisted hexagonal tubes experimentally and numerically, and revealed the mechanism of heat-transfer enhancement based on shear rate distributions.
|
|
| 5. |
- Ekstrand, Eva-Maria, 1985-, et al.
(författare)
-
Identifying targets for increased biogasproduction through chemical and organicmatter characterization of digestate from full‑scale biogas plants : what remains and why?
- 2022
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - London, United Kingdom : BioMed Central. - 2731-3654. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: This study examines the destiny of macromolecules in different full-scale biogas processes. From previousstudies it is clear that the residual organic matter in outgoing digestates can have significant biogas potential,but the factors dictating the size and composition of this residual fraction and how they correlate with the residualmethane potential (RMP) are not fully understood. The aim of this study was to generate additional knowledge of thecomposition of residual digestate fractions and to understand how they correlate with various operational and chemicalparameters. The organic composition of both the substrates and digestates from nine biogas plants operating onfood waste, sewage sludge, or agricultural waste was characterized and the residual organic fractions were linked tosubstrate type, trace metal content, ammonia concentration, operational parameters, RMP, and enzyme activity.Results: Carbohydrates represented the largest fraction of the total VS (32–68%) in most substrates. However, inthe digestates protein was instead the most abundant residual macromolecule in almost all plants (3–21 g/kg). Thedegradation efficiency of proteins generally lower (28–79%) compared to carbohydrates (67–94%) and fats (86–91%).High residual protein content was coupled to recalcitrant protein fractions and microbial biomass, either from thesubstrate or formed in the degradation process. Co-digesting sewage sludge with fat increased the protein degradationefficiency with 18%, possibly through a priming mechanism where addition of easily degradable substrates alsotriggers the degradation of more complex fractions. In this study, high residual methane production (> 140 L CH4/kgVS) was firstly coupled to operation at unstable process conditions caused mainly by ammonia inhibition (0.74 mgNH3-N/kg) and/or trace element deficiency and, secondly, to short hydraulic retention time (HRT) (55 days) relative tothe slow digestion of agricultural waste and manure.Conclusions: Operation at unstable conditions was one reason for the high residual macromolecule content andhigh RMP. The outgoing protein content was relatively high in all digesters and improving the degradation of proteinsrepresents one important way to increase the VS reduction and methane production in biogas plants. Post-treatment
|
|
| 6. |
- Escamez, Sacha, 1987-, et al.
(författare)
-
Genetic markers and tree properties predicting wood biorefining potential in aspen (Populus tremula) bioenergy feedstock
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : BioMed Central Ltd. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Wood represents the majority of the biomass on land and constitutes a renewable source of biofuels and other bioproducts. However, wood is recalcitrant to bioconversion, raising a need for feedstock improvement in production of, for instance, biofuels. We investigated the properties of wood that affect bioconversion, as well as the underlying genetics, to help identify superior tree feedstocks for biorefining. Results: We recorded 65 wood-related and growth traits in a population of 113 natural aspen genotypes from Sweden (https://doi.org/10.5061/dryad.gtht76hrd). These traits included three growth and field performance traits, 20 traits for wood chemical composition, 17 traits for wood anatomy and structure, and 25 wood saccharification traits as indicators of bioconversion potential. Glucose release after saccharification with acidic pretreatment correlated positively with tree stem height and diameter and the carbohydrate content of the wood, and negatively with the content of lignin and the hemicellulose sugar units. Most of these traits displayed extensive natural variation within the aspen population and high broad-sense heritability, supporting their potential in genetic improvement of feedstocks towards improved bioconversion. Finally, a genome-wide association study (GWAS) revealed 13 genetic loci for saccharification yield (on a whole-tree-biomass basis), with six of them intersecting with associations for either height or stem diameter of the trees. Conclusions: The simple growth traits of stem height and diameter were identified as good predictors of wood saccharification yield in aspen trees. GWAS elucidated the underlying genetics, revealing putative genetic markers for bioconversion of bioenergy tree feedstocks. © 2023, The Author(s).
|
|
| 7. |
- Eungrasamee, Kamonchanock, et al.
(författare)
-
Enhanced productivity of extracellular free fatty acids by gene disruptions of acyl-ACP synthetase and S-layer protein in Synechocystis sp. PCC 6803
- 2022
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Nature. - 2731-3654. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background Based on known metabolic response to excess free fatty acid (FFA) products, cyanobacterium Synechocystis sp. PCC 6803 preferentially both recycles via FFA recycling process and secrets them into medium. Engineered cyanobacteria with well growth and highly secreted FFA capability are considered best resources for biofuel production and sustainable biotechnology. In this study, to achieve the higher FFA secretion goal, we successfully constructs Synechocystis sp. PCC 6803 mutants disrupting genes related to FFA recycling reaction (aas gene encoding acyl-acyl carrier protein synthetase), and surface layer protein (encoded by sll1951). Results Three Synechocystis sp. PCC 6803 engineered strains, including two single mutants lacking aas (KA) and sll1951 (KS), and one double mutant lacking both aas and sll1951 (KAS), significantly secreted FFAs higher than that of wild type (WT). Certain increase of secreted FFAs was noted when cells were exposed to nitrogen-deficient conditions, BG(11)-half N and BG(11)-N conditions, with the exception of strain KS. Under BG(11)-N condition at day 10, strain KAS strikingly secreted FFAs products up to 40%w/DCW or 238.1 mg/L, with trace amounts of PHB. Unexpectedly, strain KS, with S-layer disruption, appeared to have endured longer in BG(11)-N growth medium. This strain KS significantly acclimated to the BG(11)-N environment by accumulating a greater glycogen pool with lower FFA production, whereas strain KA favored higher PHB and intracellular lipid accumulations with moderate FFA secretion. Conclusions Mutations of both aas and sll1951 genes in Synechocystis sp. PCC 6803 significantly improved the productivity of secreted FFAs, especially under nitrogen deprivation.
|
|
| 8. |
- Gao, Jie, et al.
(författare)
-
The contribution of G-layer glucose in Salix clones for biofuels: comparative enzymatic and HPLC analysis of stem cross sections
- 2022
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Science and Business Media LLC. - 2731-3654. ; 15
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Interest on the use of short rotation willow as a lignocellulose resource for liquid transport fuels has increased greatly over the last 10 years. Investigations have shown the advantages and potential of using Salix spp. for such fuels but have also emphasized the wide variations existing in the compositional structure between different species and genotypes in addition to their effects on overall yield. The present work studied the importance of tension wood (TW) as a readily available source of glucose in 2-year-old stems of four Salix clones (Tora, Bjorn, Jorr, Loden). Studies involved application of a novel approach whereby TW-glucose and residual sugars and lignin were quantified using stem cross sections with results correlated with HPLC analyses of milled wood. Compositional analyses were made for four points along stems and glucose derived from enzyme saccharification of TW gelatinous (G) layers (G-glucose), structural cell wall glucose (CW-glucose) remaining after saccharification and total glucose (T-glucose) determined both theoretically and from HPLC analyses. Comparisons were also made between presence of other characteristic sugars as well as acid-soluble and -insoluble lignin.Results: Preliminary studies showed good agreement between using stem serial sections and milled powder from Salix stems for determining total sugar and lignin. Therefore, sections were used throughout the work. HPLC determination of T-glucose in Salix clones varied between 47.1 and 52.8%, showing a trend for higher T-glucose with increasing height (Bjorn, Tora and Jorr). Using histochemical/microscopy and image analysis, Tora (24.2%) and Bjorn (28.2%) showed greater volumes of % TW than Jorr (15.5%) and Loden (14.0%). Total G-glucose with enzyme saccharification of TW G-layers varied between 3.7 and 14.7% increasing as the total TW volume increased. CW-glucose measured after enzyme saccharification showed mean values of 41.9-49.1%. Total lignin between and within clones showed small differences with mean variations of 22.4-22.8% before and 22.4-24.3% after enzyme saccharification. Calculated theoretical and quantified values for CW-glucose at different heights for clones were similar with strong correlation: T-glucose = G-glucose + CW-glucose. Pearson's correlation displayed a strong and positive correlation between T-glucose and G-glucose, % TW and stem height, and between G-glucose with % TW and stem height.Conclusions: The use of stem cross sections to estimate TW together with enzyme saccharification represents a viable approach for determining freely available G-glucose from TW allowing comparisons between Salix clones. Using stem sections provides for discrete morphological/compositional tissue comparisons between clones with results consistent with traditional wet chemical analysis approaches where entire stems are milled and analyzed. The four clones showed variable TW and presence of total % G-glucose in the order Bjorn > Tora > Jorr > Loden. Calculated in terms of 1 m(3), Salix stems Tora and Bjorn would contain ca. 0.24 and 0.28 m(3) of tension wood representing a significant amount of freely available glucose.[GRAPHICS].
|
|
| 9. |
- Jin, Yunkai, et al.
(författare)
-
Improved bioenergy value of residual rice straw by increased lipid levels from upregulation of fatty acid biosynthesis
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundRice (Oryza sativa) straw is a common waste product that represents a considerable amount of bound energy. This energy can be used for biogas production, but the rate and level of methane produced from rice straw is still low. To investigate the potential for an increased biogas production from rice straw, we have here utilized WRINKLED1 (WRI1), a plant AP2/ERF transcription factor, to increase triacylglycerol (TAG) biosynthesis in rice plants. Two forms of Arabidopsis thaliana WRI1 were evaluated by transient expression and stable transformation of rice plants, and transgenic plants were analyzed both for TAG levels and biogas production from straw.ResultsBoth full-length AtWRI1, and a truncated form lacking the initial 141 amino acids (including the N-terminal AP2 domain), increased fatty acid and TAG levels in vegetative and reproductive tissues of Indica rice. The stimulatory effect of the truncated AtWRI1 was significantly lower than that of the full-length protein, suggesting a role for the deleted AP2 domain in WRI1 activity. Full-length AtWRI1 increased TAG levels also in Japonica rice, indicating a conserved effect of WRI1 in rice lipid biosynthesis. The bio-methane production from rice straw was 20% higher in transformants than in the wild type. Moreover, a higher producing rate and final yield of methane was obtained for rice straw compared with rice husks, suggesting positive links between methane production and a high amount of fatty acids.ConclusionsOur results suggest that heterologous WRI1 expression in transgenic plants can be used to improve the metabolic potential for bioenergy purposes, in particular methane production.
|
|
| 10. |
- Kalita, Saurav, et al.
(författare)
-
Energy performance of compressed biomethane gas production from co-digestion of Salix and dairy manure: factoring differences between Salix varieties
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16
-
Tidskriftsartikel (refereegranskat)abstract
- Biogas from anaerobic digestion is a versatile energy carrier that can be upgraded to compressed biomethane gas (CBG) as a renewable and sustainable alternative to natural gas. Organic residues and energy crops are predicted to be major sources of bioenergy production in the future. Pre-treatment can reduce the recalcitrance of lignocellulosic energy crops such as Salix to anaerobic digestion, making it a potential biogas feedstock. This lignocellulosic material can be co-digested with animal manure, which has the complementary effect of increasing volumetric biogas yield. Salix varieties exhibit variations in yield, composition and biomethane potential values, which can have a significant effect on the overall biogas production system. This study assessed the impact of Salix varietal differences on the overall mass and energy balance of a co-digestion system using steam pre-treated Salix biomass and dairy manure (DaM) to produce CBG as the final product. Six commercial Salix varieties cultivated under unfertilised and fertilised conditions were compared. Energy and mass flows along this total process chain, comprising Salix cultivation, steam pre-treatment, biogas production and biogas upgrading to CBG, were evaluated. Two scenarios were considered: a base scenario without heat recovery and a scenario with heat recovery. The results showed that Salix variety had a significant effect on energy output-input ratio (R), with R values in the base scenario of 1.57-1.88 and in the heat recovery scenario of 2.36-2.94. In both scenarios, unfertilised var. Tordis was the best energy performer, while the fertilised var. Jorr was the worst. Based on this energy performance, Salix could be a feasible feedstock for co-digestion with DaM, although its R value was at the lower end of the range reported previously for energy crops.
|
|
| 11. |
- Liu, Changshuo, et al.
(författare)
-
Enhanced upgrading of lignocellulosic substrates by coculture of Saccharomyces cerevisiae and Acinetobacter baylyi ADP1
- 2024
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 17:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background Lignocellulosic biomass as feedstock has a huge potential for biochemical production. Still, efficient utilization of hydrolysates derived from lignocellulose is challenged by their complex and heterogeneous composition and the presence of inhibitory compounds, such as furan aldehydes. Using microbial consortia where two specialized microbes complement each other could serve as a potential approach to improve the efficiency of lignocellulosic biomass upgrading. Results This study describes the simultaneous inhibitor detoxification and production of lactic acid and wax esters from a synthetic lignocellulosic hydrolysate by a defined coculture of engineered Saccharomyces cerevisiae and Acinetobacter baylyi ADP1. A. baylyi ADP1 showed efficient bioconversion of furan aldehydes present in the hydrolysate, namely furfural and 5-hydroxymethylfurfural, and did not compete for substrates with S. cerevisiae, highlighting its potential as a coculture partner. Furthermore, the remaining carbon sources and byproducts of S. cerevisiae were directed to wax ester production by A. baylyi ADP1. The lactic acid productivity of S. cerevisiae was improved approximately 1.5-fold (to 0.41 ± 0.08 g/L/h) in the coculture with A. baylyi ADP1, compared to a monoculture of S. cerevisiae. Conclusion The coculture of yeast and bacterium was shown to improve the consumption of lignocellulosic substrates and the productivity of lactic acid from a synthetic lignocellulosic hydrolysate. The high detoxification capacity and the ability to produce high-value products by A. baylyi ADP1 demonstrates the strain to be a potential candidate for coculture to increase production efficiency and economics of S. cerevisiae fermentations.
|
|
| 12. |
- Liu, Xiaoqing, et al.
(författare)
-
Exploring the cellulolytic and hemicellulolytic activities of manganese peroxidase for lignocellulose deconstruction
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundA cost-effective pretreatment and saccharification process is a necessary prerequisite for utilizing lignocellulosic biomass (LCB) in biofuel and biomaterials production. Utilizing a multifunctional enzyme with both pretreatment and saccharification functions in a single step for simultaneous biological pretreatment and saccharification process (SPS) will be a green method of low cost and high efficiency. Manganese peroxidase (MnP, EC 1.11.1.13), a well-known lignin-degrading peroxidase, is generally preferred for the biological pretreatment of biomass. However, exploring the role and performance of MnP in LCB conversion will promote the application of MnP for lignocellulose-based biorefineries.ResultsIn this study, we explored the ability of an MnP from Moniliophthora roreri, MrMnP, in LCB degradation. With Mn2+ and H2O2, MrMnP decomposed 5.0 g/L carboxymethyl cellulose to 0.14 mM of reducing sugar with a conversion yield of 5.0 mg/g, including 40 μM cellobiose, 70 μM cellotriose, 20 μM cellotetraose, and 10 μM cellohexaose, and degraded 1.0 g/L mannohexaose to 0.33 μM mannose, 4.08 μM mannotriose, and 4.35 μM mannopentaose. Meanwhile, MrMnP decomposed 5.0 g/L lichenan to 0.85 mM of reducing sugar with a conversion yield of 30.6 mg/g, including 10 μM cellotriose, 20 μM cellotetraose, and 80 μM cellohexose independently of Mn2+ and H2O2. Moreover, the versatility of MrMnP in LCB deconstruction was further verified by decomposing locust bean gum and wheat bran into reducing sugars with a conversion yield of 54.4 mg/g and 29.5 mg/g, respectively, including oligosaccharides such as di- and tri-saccharides. The catalytic mechanism underlying MrMnP degraded lignocellulose was proposed as that with H2O2, MrMnP oxidizes Mn2+ to Mn3+. Subsequently, it forms a complex with malonate, facilitating the degradation of CMC and mannohexaose into reducing sugars. Without H2O2, MrMnP directly oxidizes malonate to hydroperoxyl acetic acid radical to form compound I, which then attacks the glucosidic bond of lichenan.ConclusionThis study identified a new function of MrMnP in the hydrolysis of cellulose and hemicellulose, suggesting that MrMnP exhibits its versatility in the pretreatment and saccharification of LCB. The results will lead to an in-depth understanding of biocatalytic saccharification and contribute to forming new enzymatic systems for using lignocellulose resources to produce sustainable and economically viable products and the long-term development of biorefinery, thereby increasing the productivity of LCB as a green resource.
|
|
| 13. |
- Martín Hernández, Giselle De La Caridad, et al.
(författare)
-
Enhanced glycerol assimilation and lipid production in Rhodotorula toruloides CBS14 upon addition of hemicellulose primarily correlates with early transcription of energy-metabolism-related genes
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Science and Business Media LLC. - 2731-3654. ; 16
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundLipid formation from glycerol was previously found to be activated in Rhodotorula toruloides when the yeast was cultivated in a mixture of crude glycerol (CG) and hemicellulose hydrolysate (CGHH) compared to CG as the only carbon source. RNA samples from R. toruloides CBS14 cell cultures grown on either CG or CGHH were collected at different timepoints of cultivation, and a differential gene expression analysis was performed between cells grown at a similar physiological situation.ResultsWe observed enhanced transcription of genes involved in oxidative phosphorylation and enzymes localized in mitochondria in CGHH compared to CG. Genes involved in protein turnover, including those encoding ribosomal proteins, translation elongation factors, and genes involved in building the proteasome also showed an enhanced transcription in CGHH compared to CG. At 10 h cultivation, another group of activated genes in CGHH was involved in beta-oxidation, handling oxidative stress and degradation of xylose and aromatic compounds. Potential bypasses of the standard GUT1 and GUT2-glycerol assimilation pathway were also expressed and upregulated in CGHH 10 h. When the additional carbon sources from HH were completely consumed, at CGHH 36 h, their transcription decreased and NAD(+)-dependent glycerol-3-phosphate dehydrogenase was upregulated compared to CG 60 h, generating NADH instead of NADPH with glycerol catabolism. TPI1 was upregulated in CGHH compared to cells grown on CG in all physiological situations, potentially channeling the DHAP formed through glycerol catabolism into glycolysis. The highest number of upregulated genes encoding glycolytic enzymes was found after 36 h in CGHH, when all additional carbon sources were already consumed.ConclusionsWe suspect that the physiological reason for the accelerated glycerol assimilation and faster lipid production, was primarily the activation of enzymes that provide energy.
|
|
| 14. |
- Mellerowicz, Ewa
(författare)
-
Modifying lignin composition and xylan O-acetylation induces changes in cell wall composition, extractability, and digestibility
- 2024
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 17
-
Tidskriftsartikel (refereegranskat)abstract
- Background Lignin and xylan are important determinants of cell wall structure and lignocellulosic biomass digestibility. Genetic manipulations that individually modify either lignin or xylan structure improve polysaccharide digestibility. However, the effects of their simultaneous modifications have not been explored in a similar context. Here, both individual and combinatorial modification in xylan and lignin was studied by analysing the effect on plant cell wall properties, biotic stress responses and integrity sensing. Results Arabidopsis plant co-harbouring mutation in FERULATE 5-HYDROXYLASE (F5H) and overexpressing Aspergillus niger acetyl xylan esterase (35S:AnAXE1) were generated and displayed normal growth attributes with intact xylem architecture. This fah1-2/35S:AnAXE1 cross was named as hyper G lignin and hypoacetylated (HrGHypAc) line. The HrGHypAc plants showed increased crystalline cellulose content with enhanced digestibility after chemical and enzymatic pre-treatment. Moreover, both parents and HrGHypAc without and after pre-treating with glucuronyl esterase and alpha glucuronidase exhibited an increase in xylose release after xylanase digestion as compared to wild type. The de-pectinated fraction in HrGHypAc displayed elevated levels of xylan and cellulose. Furthermore, the transcriptomic analysis revealed differential expression in cell wall biosynthetic, transcription factors and wall-associated kinases genes implying the role of lignin and xylan modification on cellular regulatory processes. Conclusions Simultaneous modification in xylan and lignin enhances cellulose content with improved saccharification efficiency. These modifications loosen cell wall complexity and hence resulted in enhanced xylose and xylobiose release with or without pretreatment after xylanase digestion in both parent and HrGHypAc. This study also revealed that the disruption of xylan and lignin structure is possible without compromising either growth and development or defense responses against Pseudomonas syringae infection.
|
|
| 15. |
- Moenaert, Antoine, et al.
(författare)
-
Metabolic engineering of Thermoanaerobacterium AK17 for increased ethanol production in seaweed hydrolysate
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Sustainably produced renewable biomass has the potential to replace fossil-based feedstocks, for generation of biobased fuels and chemicals of industrial interest, in biorefineries. In this context, seaweeds contain a large fraction of carbohydrates that are a promising source for enzymatic and/or microbial biorefinery conversions. The thermoanaerobe Thermoanaerobacterium AK17 is a versatile fermentative bacterium producing ethanol, acetate and lactate from various sugars. In this study, strain AK17 was engineered for more efficient production of ethanol by knocking out the lactate and acetate side-product pathways. This was successfully achieved, but the strain reverted to acetate production by recruiting enzymes from the butyrate pathway. Subsequently this pathway was knocked out and the resultant strain AK17_M6 could produce ethanol close to the maximum theoretical yield (90%), leading to a 1.5-fold increase in production compared to the wild-type strain. Strain AK17 was also shown to successfully ferment brown seaweed hydrolysate from Laminaria digitata to ethanol in a comparatively high yield of 0.45 g/g substrate, with the primary carbon sources for the fermentations being mannitol, laminarin-derived glucose and short laminari-oligosaccharides. As strain AK17 was successfully engineered and has a wide carbohydrate utilization range that includes mannitol from brown seaweed, as well as hexoses and pentoses found in both seaweeds and lignocellulose, the new strain AK17_M6 obtained in this study is an interesting candidate for production of ethanol from both second and third generations biomass.
|
|
| 16. |
- Müller, Bettina, et al.
(författare)
-
Production of short-chain fatty acids (SCFAs) as chemicals or substrates for microbes to obtain biochemicals
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16
-
Forskningsöversikt (refereegranskat)abstract
- Carboxylic acids have become interesting platform molecules in the last years due to their versatility to act as carbon sources for different microorganisms or as precursors for the chemical industry. Among carboxylic acids, short-chain fatty acids (SCFAs) such as acetic, propionic, butyric, valeric, and caproic acids can be biotechnologically produced in an anaerobic fermentation process from lignocellulose or other organic wastes of agricultural, industrial, or municipal origin. The biosynthesis of SCFAs is advantageous compared to chemical synthesis, since the latter relies on fossil-derived raw materials, expensive and toxic catalysts and harsh process conditions. This review article gives an overview on biosynthesis of SCFAs from complex waste products. Different applications of SCFAs are explored and how these acids can be considered as a source of bioproducts, aiming at the development of a circular economy. The use of SCFAs as platform molecules requires adequate concentration and separation processes that are also addressed in this review. Various microorganisms such as bacteria or oleaginous yeasts can efficiently use SCFA mixtures derived from anaerobic fermentation, an attribute that can be exploited in microbial electrolytic cells or to produce biopolymers such as microbial oils or polyhydroxyalkanoates. Promising technologies for the microbial conversion of SCFAs into bioproducts are outlined with recent examples, highlighting SCFAs as interesting platform molecules for the development of future bioeconomy.
|
|
| 17. |
- Patel, Alok, Dr. 1989-, et al.
(författare)
-
A bioprocess engineering approach for the production of hydrocarbons and fatty acids from green microalga under high cobalt concentration as the feedstock of high-grade biofuels
- 2024
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Nature. - 2731-3654. ; 17
-
Tidskriftsartikel (refereegranskat)abstract
- Botryococcus braunii, a colonial green microalga which is well-known for its capacity to synthesize hydrocarbons, has significant promise as a long-term source of feedstock for the generation of biofuels. However, cultivating and scaling up B. braunii using conventional aqua-suspended cultivation systems remains a challenge. In this study, we optimized medium components and light intensity to enhance lipid and hydrocarbon production in a multi-cultivator airlift photobioreactor. BBM 3N medium with 200 μmol/m2/s light intensity and a 16 h light–8 h dark regimen yielded the highest biomass productivity (110.00 ± 2.88 mg/L/day), as well as the highest lipid and hydrocarbon content. Cultivation in a flat-panel bioreactor resulted in significantly higher biomass productivity (129.11 ± 2.74 mg/L/day), lipid productivity (32.21 ± 1.31 mg/L/day), and hydrocarbon productivity (28.98 ± 2.08 mg/L/day) compared to cultivation in Erlenmeyer flasks and open 20-L raceway pond. It also exhibited 20.15 ± 1.03% of protein content including elevated levels of chlorophyll a, chlorophyll b, and carotenoids. This work is noteworthy since it is the first to describe fatty acid and hydrocarbon profiles of B. braunii during cobalt treatment. The study demonstrated that high cobalt concentrations (up to 5 mg/L of cobalt nitrate) during Botryococcus culture affected hydrocarbon synthesis, resulting in high amounts of n-alkadienes and trienes as well as lipids with elevated monounsaturated fatty acids concentration. Furthermore, pyrolysis experiments on microalgal green biomass and de-oiled biomass revealed the lipid and hydrocarbon compounds generated by the thermal degradation of B. braunii that facilitate extra economical value to this system.
|
|
| 18. |
- Persson, Viktor C., et al.
(författare)
-
Impact of xylose epimerase on sugar assimilation and sensing in recombinant Saccharomyces cerevisiae carrying different xylose-utilization pathways
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundOver the last decades, many strategies to procure and improve xylose consumption in Saccharomyces cerevisiae have been reported. This includes the introduction of efficient xylose-assimilating enzymes, the improvement of xylose transport, or the alteration of the sugar signaling response. However, different strain backgrounds are often used, making it difficult to determine if the findings are transferrable both to other xylose-consuming strains and to other xylose-assimilation pathways. For example, the influence of anomerization rates between α- and β-xylopyranose in pathway optimization and sugar sensing is relatively unexplored.ResultsIn this study, we tested the effect of expressing a xylose epimerase in S. cerevisiae strains carrying different xylose-consuming routes. First, XIs originating from three different species in isogenic S. cerevisiae strains were tested and the XI from Lachnoclostridium phytofermentans was found to give the best performance. The benefit of increasing the anomerization rate of xylose by adding a xylose epimerase to the XI strains was confirmed, as higher biomass formation and faster xylose consumption were obtained. However, the impact of xylose epimerase was XI-dependent, indicating that anomer preference may differ from enzyme to enzyme. The addition of the xylose epimerase in xylose reductase/xylitol dehydrogenase (XR/XDH)-carrying strains gave no improvement in xylose assimilation, suggesting that the XR from Spathaspora passalidarum had no anomer preference, in contrast to other reported XRs. The reduction in accumulated xylitol that was observed when the xylose epimerase was added may be associated with the upregulation of genes encoding endogenous aldose reductases which could be affected by the anomerization rate. Finally, xylose epimerase addition did not affect the sugar signaling, whereas the type of xylose pathway (XI vs. XR/XDH) did.ConclusionsAlthough xylose anomer specificity is often overlooked, the addition of xylose epimerase should be considered as a key engineering step, especially when using the best-performing XI enzyme from L. phytofermentans. Additional research into the binding mechanism of xylose is needed to elucidate the enzyme-specific effect and decrease in xylitol accumulation. Finally, the differences in sugar signaling responses between XI and XR/XDH strains indicate that either the redox balance or the growth rate impacts the SNF1/Mig1p sensing pathway.
|
|
| 19. |
- Sigtryggsson, Christian, et al.
(författare)
-
From straw to salmon: a technical design and energy balance for production of yeast oil for fish feed from wheat straw
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundAquaculture is a major user of plant-derived feed ingredients, such as vegetable oil. Production of vegetable oil and protein is generally more energy-intensive than production of the marine ingredients they replace, so increasing inclusion of vegetable ingredients increases the energy demand of the feed. Microbial oils, such as yeast oil made by fermentation of lignocellulosic hydrolysate, have been proposed as a complement to plant oils, but energy assessments of microbial oil production are needed. This study presents a mass and energy balance for a biorefinery producing yeast oil through conversion of wheat straw hydrolysate, with co-production of biomethane and power.ResultsThe results showed that 1 tonne of yeast oil (37 GJ) would require 9.2 tonnes of straw, 14.7 GJ in fossil primary energy demand, 14.6 GJ of process electricity and 13.3 GJ of process heat, while 21.5 GJ of biomethane (430 kg) and 6 GJ of excess power would be generated simultaneously. By applying economic allocation, the fossil primary energy demand was estimated to 11.9 GJ per tonne oil.ConclusionsFossil primary energy demand for yeast oil in the four scenarios studied was estimated to be 10-38% lower than for the commonly used rapeseed oil and process energy demand could be met by parallel combustion of lignin residues. Therefore, feed oil can be produced from existing non-food biomass without causing agricultural expansion.
|
|
| 20. |
- Stovicek, Vratislav, et al.
(författare)
-
Rational and evolutionary engineering of Saccharomyces cerevisiae for production of dicarboxylic acids from lignocellulosic biomass and exploring genetic mechanisms of the yeast tolerance to the biomass hydrolysate
- 2022
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Science and Business Media LLC. - 2731-3654. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Lignosulfonates are significant wood chemicals with a $700 million market, produced by sulfite pulping of wood. During the pulping process, spent sulfite liquor (SSL) is generated, which in addition to lignosulfonates contains hemicellulose-derived sugars—in case of hardwoods primarily the pentose sugar xylose. The pentoses are currently underutilized. If they could be converted into value-added chemicals, overall economic profitability of the process would increase. SSLs are typically very inhibitory to microorganisms, which presents a challenge for a biotechnological process. The aim of the present work was to develop a robust yeast strain able to convert xylose in SSL to carboxylic acids. Results: The industrial strain Ethanol Red of the yeast Saccharomyces cerevisiae was engineered for efficient utilization of xylose in a Eucalyptus globulus lignosulfonate stream at low pH using CRISPR/Cas genome editing and adaptive laboratory evolution. The engineered strain grew in synthetic medium with xylose as sole carbon source with maximum specific growth rate (µmax) of 0.28 1/h. Selected evolved strains utilized all carbon sources in the SSL at pH 3.5 and grew with µmax between 0.05 and 0.1 1/h depending on a nitrogen source supplement. Putative genetic determinants of the increased tolerance to the SSL were revealed by whole genome sequencing of the evolved strains. In particular, four top-candidate genes (SNG1, FIT3, FZF1 and CBP3) were identified along with other gene candidates with predicted important roles, based on the type and distribution of the mutations across different strains and especially the best performing ones. The developed strains were further engineered for production of dicarboxylic acids (succinic and malic acid) via overexpression of the reductive branch of the tricarboxylic acid cycle (TCA). The production strain produced 0.2 mol and 0.12 mol of malic acid and succinic acid, respectively, per mol of xylose present in the SSL. Conclusions: The combined metabolic engineering and adaptive evolution approach provided a robust SSL-tolerant industrial strain that converts fermentable carbon content of the SSL feedstock into malic and succinic acids at low pH.in production yields reaching 0.1 mol and 0.065 mol per mol of total consumed carbon sources. Moreover, our work suggests potential genetic background of the tolerance to the SSL stream pointing out potential gene targets for improving the tolerance to inhibitory industrial feedstocks.
|
|
| 21. |
- Tang, Chaojun, et al.
(författare)
-
LPMO-supported saccharification of biomass : effects of continuous aeration of reaction mixtures with variable fractions of water-insoluble solids and cellulolytic enzymes
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : BioMed Central (BMC). - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: High substrate concentrations and high sugar yields are important aspects of enzymatic saccharification of lignocellulosic substrates. The benefit of supporting the catalytic action of lytic polysaccharide monooxygenase (LPMO) through continuous aeration of slurries of pretreated softwood was weighed against problems associated with increasing substrate content (quantitated as WIS, water-insoluble solids, in the range 12.5–17.5%), and was compared to the beneficial effect on the saccharification reaction achieved by increasing the enzyme preparation (Cellic CTec3) loadings. Aerated reactions were compared to reactions supplied with N2 to assess the contribution of LPMO to the saccharification reactions. Analysis using 13C NMR spectroscopy, XRD, Simons’ staining, BET analysis, and SEM analysis was used to gain further insights into the effects of the cellulolytic enzymes on the substrate under different reaction conditions.Results: Although glucose production after 72 h was higher at 17.5% WIS than at 12.5% WIS, glucan conversion decreased with 24% (air) and 17% (N2). Compared to reactions with N2, the average increases in glucose production for aerated reactions were 91% (12.5% WIS), 70% (15.0% WIS), and 67% (17.5% WIS). Improvements in glucan conversion through aeration were larger (55–86%) than the negative effects of increasing WIS content. For reactions with 12.5% WIS, increased enzyme dosage with 50% improved glucan conversion with 25–30% for air and N2, whereas improvements with double enzyme dosage were 30% (N2) and 39% (air). Structural analyses of the solid fractions revealed that the enzymatic reaction, particularly with aeration, created increased surface area (BET analysis), increased disorder (SEM analysis), decreased crystallinity (XRD), and increased dye adsorption based on the cellulose content (Simons' staining).Conclusions: The gains in glucan conversion with aeration were larger than the decreases observed due to increased substrate content, resulting in higher glucan conversion when using aeration at the highest WIS value than when using N2 at the lowest WIS value. The increase in glucan conversion with double enzyme preparation dosage was smaller than the increase achieved with aeration. The results demonstrate the potential in using proper aeration to exploit the inherent capacity of LPMO in enzymatic saccharification of lignocellulosic substrates and provide detailed information about the characteristics of the substrate after interaction with cellulolytic enzymes.
|
|
| 22. |
- Tõlgo, Monika, 1994, et al.
(författare)
-
Enzymatic debranching is a key determinant of the xylan-degrading activity of family AA9 lytic polysaccharide monooxygenases
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Science and Business Media LLC. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Previous studies have revealed that some Auxiliary Activity family 9 (AA9) lytic polysaccharide monooxygenases (LPMOs) oxidize and degrade certain types of xylans when incubated with mixtures of xylan and cellulose. Here, we demonstrate that the xylanolytic activities of two xylan-active LPMOs, TtLPMO9E and TtLPMO9G from Thermothielavioides terrestris, strongly depend on the presence of xylan substitutions. Results: Using mixtures of phosphoric acid-swollen cellulose (PASC) and wheat arabinoxylan (WAX), we show that removal of arabinosyl substitutions with a GH62 arabinofuranosidase resulted in better adsorption of xylan to cellulose, and enabled LPMO-catalyzed cleavage of this xylan. Furthermore, experiments with mixtures of PASC and arabinoglucuronoxylan from spruce showed that debranching of xylan with the GH62 arabinofuranosidase and a GH115 glucuronidase promoted LPMO activity. Analyses of mixtures with PASC and (non-arabinosylated) beechwood glucuronoxylan showed that GH115 action promoted LPMO activity also on this xylan. Remarkably, when WAX was incubated with Avicel instead of PASC in the presence of the GH62, both xylan and cellulose degradation by the LPMO9 were impaired, showing that the formation of cellulose–xylan complexes and their susceptibility to LPMO action also depend on the properties of the cellulose. These debranching effects not only relate to modulation of the cellulose–xylan interaction, which influences the conformation and rigidity of the xylan, but likely also affect the LPMO–xylan interaction, because debranching changes the architecture of the xylan surface. Conclusions: Our results shed new light on xylanolytic LPMO9 activity and on the functional interplay and possible synergies between the members of complex lignocellulolytic enzyme cocktails. These findings will be relevant for the development of future lignocellulolytic cocktails and biomaterials.
|
|
| 23. |
- Torello Pianale, Luca, 1995, et al.
(författare)
-
Four ways of implementing robustness quantification in strain characterisation
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background. In industrial bioprocesses, microorganisms are generally selected based on performance, whereas robustness, i.e., the ability of a system to maintain a stable performance, has been overlooked due to the challenges in its quantification and implementation into routine experimental procedures. This work presents four ways of implementing robustness quantification during strain characterisation. One Saccharomyces cerevisiae laboratory strain (CEN.PK113-7D) and two industrial strains (Ethanol Red and PE2) grown in seven different lignocellulosic hydrolysates were assessed for growth-related functions (specific growth rate, product yields, etc.) and eight intracellular parameters (using fluorescent biosensors). Results. Using flasks and high-throughput experimental setups, robustness was quantified in relation to: (i) stability of growth functions in response to the seven hydrolysates; (ii) stability of growth functions across different strains to establish the impact of perturbations on yeast metabolism; (iii) stability of intracellular parameters over time; (iv) stability of intracellular parameters within a cell population to indirectly quantify population heterogeneity. Ethanol Red was the best-performing strain under all tested conditions, achieving the highest growth function robustness. PE2 displayed the highest population heterogeneity. Moreover, the intracellular environment varied in response to non-woody or woody lignocellulosic hydrolysates, manifesting increased oxidative stress and unfolded protein response, respectively. Conclusions. Robustness quantification is a powerful tool for strain characterisation as it offers novel information on physiological and biochemical parameters. Owing to the flexibility of the robustness quantification method, its implementation was successfully validated at single-cell as well as high-throughput levels, showcasing its versatility and potential for several applications.
|
|
| 24. |
- Vongkampang, Thitiwut, et al.
(författare)
-
Immobilization techniques improve volumetric hydrogen productivity of Caldicellulosiruptor species in a modified continuous stirred tank reactor
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Science and Business Media LLC. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Co-cultures and cell immobilization have been used for retaining biomass in a bioreactor, with the aim to improve the volumetric hydrogen productivity (QH2). Caldicellulosiruptor kronotskyensis is a strong cellulolytic species that possesses tāpirin proteins for attaching on lignocellulosic materials. C. owensensis has its reputation as a biofilm former. It was investigated whether continuous co-cultures of these two species with different types of carriers can improve the QH2. Results: QH2 up to 30 ± 0.2 mmol L−1 h−1 was obtained during pure culture of C. kronotskyensis with combined acrylic fibres and chitosan. In addition, the yield of hydrogen was 2.95 ± 0.1 mol H2 mol−1 sugars at a dilution rate (D) of 0.3 h−1. However, the second-best QH2 26.4 ± 1.9 mmol L−1 h−1 and 25.4 ± 0.6 mmol L−1 h−1 were obtained with a co-culture of C. kronotskyensis and C. owensensis with acrylic fibres only and a pure culture of C. kronotskyensis with acrylic fibres, respectively. Interestingly, the population dynamics revealed that C. kronotskyensis was the dominant species in the biofilm fraction, whereas C. owensensis was the dominant species in the planktonic phase. The highest amount of c-di-GMP (260 ± 27.3 µM at a D of 0.2 h−1) were found with the co-culture of C. kronotskyensis and C. owensensis without a carrier. This could be due to Caldicellulosiruptor producing c-di-GMP as a second messenger for regulation of the biofilms under the high dilution rate (D) to prevent washout. Conclusions: The cell immobilization strategy using a combination of carriers exhibited a promising approach to enhance the QH2. The QH2 obtained during the continuous culture of C. kronotskyensis with combined acrylic fibres and chitosan gave the highest QH2 among the pure culture and mixed cultures of Caldicellulosiruptor in the current study. Moreover, it was the highest QH2 among all cultures of Caldicellulosiruptor species studied so far.
|
|
| 25. |
- Xie, Hao, et al.
(författare)
-
Sustainable production of photosynthetic isobutanol and 3-methyl-1-butanol in the cyanobacterium Synechocystis sp. PCC 6803
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : BMC. - 2731-3654. ; 16
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Cyanobacteria are emerging as green cell factories for sustainable biofuel and chemical production, due to their photosynthetic ability to use solar energy, carbon dioxide and water in a direct process. The model cyanobacterial strain Synechocystis sp. PCC 6803 has been engineered for the isobutanol and 3-methyl-1-butanol production by introducing a synthetic 2-keto acid pathway. However, the achieved productions still remained low. In the present study, diverse metabolic engineering strategies were implemented in Synechocystis sp. PCC 6803 for further enhanced photosynthetic isobutanol and 3-methyl-1-butanol production.Results: Long-term cultivation was performed on two selected strains resulting in maximum cumulative isobutanol and 3-methyl-1-butanol titers of 1247 mg L- 1 and 389 mg L- 1, on day 58 and day 48, respectively. Novel Synechocystis strain integrated with a native 2-keto acid pathway was generated and showed a production of 98 mg isobutanol L- 1 in short-term screening experiments. Enhanced isobutanol and 3-methyl-1-butanol production was observed when increasing the kivdS286T copy number from three to four. Isobutanol and 3-methyl-1-butanol production was effectively improved when overexpressing selected genes of the central carbon metabolism. Identified genes are potential metabolic engineering targets to further enhance productivity of pyruvate-derived bioproducts in cyanobacteria.Conclusions: Enhanced isobutanol and 3-methyl-1-butanol production was successfully achieved in Synechocystis sp. PCC 6803 strains through diverse metabolic engineering strategies. The maximum cumulative isobutanol and 3-methyl-1-butanol titers, 1247 mg L- 1 and 389 mg L- 1, respectively, represent the current highest value reported. The significantly enhanced isobutanol and 3-methyl-1-butanol production in this study further pave the way for an industrial application of photosynthetic cyanobacteria-based biofuel and chemical synthesis from CO2.
|
|
| 26. |
- Yao, Zhen, et al.
(författare)
-
A highly efficient transcriptome-based biosynthesis of non-ethanol chemicals in Crabtree negative Saccharomyces cerevisiae
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Science and Business Media LLC. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Owing to the Crabtree effect, Saccharomyces cerevisiae produces a large amount of ethanol in the presence of oxygen and excess glucose, leading to a loss of carbon for the biosynthesis of non-ethanol chemicals. In the present study, the potential of a newly constructed Crabtree negative S. cerevisiae, as a chassis cell, was explored for the biosynthesis of various non-ethanol compounds. Results: To understand the metabolic characteristics of Crabtree negative S. cerevisiae sZJD-28, its transcriptional profile was compared with that of Crabtree positive S. cerevisiae CEN.PK113-11C. The reporter GO term analysis showed that, in sZJD-28, genes associated with translational processes were down-regulated, while those related to carbon metabolism were significantly up-regulated. To verify a potential increase in carbon metabolism for the Crabtree negative strain, the production of non-ethanol chemicals, derived from different metabolic nodes, was then undertaken for both sZJD-28 and CEN.PK113-11C. At the pyruvate node, production of 2,3-butanediol and lactate in sZJD-28-based strains was remarkably higher than that of CEN.PK113-11C-based ones, representing 16.8- and 1.65-fold increase in titer, as well as 4.5-fold and 0.65-fold increase in specific titer (mg/L/OD), respectively. Similarly, for shikimate derived p-coumaric acid, the titer of sZJD-28-based strain was 0.68-fold higher than for CEN.PK113-11C-based one, with a 0.98-fold increase in specific titer. While farnesene and lycopene, two acetoacetyl-CoA derivatives, showed 0.21- and 1.88-fold increases in titer, respectively. From malonyl-CoA, the titer of 3-hydroxypropionate and fatty acids in sZJD-28-based strains were 0.19- and 0.76-fold higher than that of CEN.PK113-11C-based ones, respectively. In fact, yields of products also improved by the same fold due to the absence of residual glucose. Fed-batch fermentation further showed that the titer of free fatty acids in sZJD-28-based strain 28-FFA-E reached 6295.6 mg/L with a highest reported specific titer of 247.7 mg/L/OD in S. cerevisiae. Conclusions: Compared with CEN.PK113-11C, the Crabtree negative sZJD-28 strain displayed a significantly different transcriptional profile and obvious advantages in the biosynthesis of non-ethanol chemicals due to redirected carbon and energy sources towards metabolite biosynthesis. The findings, therefore, suggest that a Crabtree negative S. cerevisiae strain could be a promising chassis cell for the biosynthesis of various chemicals.
|
|
| 27. |
- Yuan, Zhaoyang, et al.
(författare)
-
Technoeconomic evaluation of recent process improvements in production of sugar and high-value lignin co-products via two-stage Cu-catalyzed alkaline-oxidative pretreatment
- 2022
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Nature. - 2731-3654. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: A lignocellulose-to-biofuel biorefinery process that enables multiple product streams is recognized as a promising strategy to improve the economics of this biorefinery and to accelerate technology commercialization. We recently identified an innovative pretreatment technology that enables of the production of sugars at high yields while simultaneously generating a high-quality lignin stream that has been demonstrated as both a promising renewable polyol replacement for polyurethane applications and is highly susceptible to depolymerization into monomers. This technology comprises a two-stage pretreatment approach that includes an alkaline pre-extraction followed by a metal-catalyzed alkaline-oxidative pretreatment. Our recent work demonstrated that H2O2 and O2 act synergistically as co-oxidants during the alkaline-oxidative pretreatment and could significantly reduce the pretreatment chemical input while maintaining high sugar yields (~ 95% glucose and ~ 100% xylose of initial sugar composition), high lignin yields (~ 75% of initial lignin), and improvements in lignin usage.Results: This study considers the economic impact of these advances and provides strategies that could lead to additional economic improvements for future commercialization. The results of the technoeconomic analysis (TEA) demonstrated that adding O2 as a co-oxidant at 50 psig for the alkaline-oxidative pretreatment and reducing the raw material input reduced the minimum fuel selling price from $1.08/L to $0.85/L, assuming recoverable lignin is used as a polyol replacement. If additional lignin can be recovered and sold as more valuable monomers, the minimum fuel selling price (MFSP) can be further reduced to $0.73/L.Conclusions: The present work demonstrated that high sugar and lignin yields combined with low raw material inputs and increasing the value of lignin could greatly increase the economic viability of a poplar-based biorefinery. Continued research on integrating sugar production with lignin valorization is thus warranted to confirm this economic potential as the technology matures.
|
|
| 28. |
- Zhang, Xiaoling, et al.
(författare)
-
Discovery of novel alkaline-tolerant xylanases from fecal microbiota of dairy cows
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Xylo-oligosaccharides (XOS) are considered as a promising type of prebiotics that can be used in foods, feeds, and healthcare products. Xylanases play a key role in the production of XOS from xylan. In this study, we conducted a metagenomic analysis of the fecal microbiota from dairy cows fed with different types of fodders. Despite the diversity in their diets, the main phyla observed in all fecal microbiota were Firmicutes and Bacteroidetes. At the genus level, one group of dairy cows that were fed probiotic fermented herbal mixture-containing fodders displayed decreased abundance of Methanobrevibacter and increased growth of beneficial Akkermansia bacteria. Additionally, this group exhibited a high microbial richness and diversity. Through our analysis, we obtained a comprehensive dataset comprising over 280,000 carbohydrate-active enzyme genes. Among these, we identified a total of 163 potential xylanase genes and subsequently expressed 34 of them in Escherichia coli. Out of the 34 expressed genes, two alkaline xylanases with excellent temperature stability and pH tolerance were obtained. Notably, CDW-xyl-8 exhibited xylanase activity of 96.1 ± 7.5 U/mg protein, with an optimal working temperature of 55 ℃ and optimal pH of 8.0. CDW-xyl-16 displayed an activity of 427.3 ± 9.1 U/mg protein with an optimal pH of 8.5 and an optimal temperature at 40 ℃. Bioinformatic analyses and structural modeling suggest that CDW-xyl-8 belongs to GH10 family xylanase, and CDW-xyl-16 is a GH11 family xylanase. Both enzymes have the ability to hydrolyze beechwood xylan and produce XOS. In conclusion, this metagenomic study provides valuable insights into the fecal microbiota composition of dairy cows fed different fodder types, revealing main microbial groups and demonstrating the abundance of xylanases. Furthermore, the characterization of two novel xylanases highlights their potential application in XOS production.
|
|
| 29. |
- Zhang, Yiming, 1986, et al.
(författare)
-
Engineering yeast mitochondrial metabolism for 3-hydroxypropionate production
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: With unique physiochemical environments in subcellular organelles, there has been growing interest in harnessing yeast organelles for bioproduct synthesis. Among these organelles, the yeast mitochondrion has been found to be an attractive compartment for production of terpenoids and branched-chain alcohols, which could be credited to the abundant supply of acetyl-CoA, ATP and cofactors. In this study we explored the mitochondrial potential for production of 3-hydroxypropionate (3-HP) and performed the cofactor engineering and flux control at the acetyl-CoA node to maximize 3-HP synthesis. Results: Metabolic modeling suggested that the mitochondrion serves as a more suitable compartment for 3-HP synthesis via the malonyl-CoA pathway than the cytosol, due to the opportunity to obtain a higher maximum yield and a lower oxygen consumption. With the malonyl-CoA reductase (MCR) targeted into the mitochondria, the 3-HP production increased to 0.27 g/L compared with 0.09 g/L with MCR expressed in the cytosol. With enhanced expression of dissected MCR enzymes, the titer reached to 4.42 g/L, comparable to the highest titer achieved in the cytosol so far. Then, the mitochondrial NADPH supply was optimized by overexpressing POS5 and IDP1, which resulted in an increase in the 3-HP titer to 5.11 g/L. Furthermore, with induced expression of an ACC1 mutant in the mitochondria, the final 3-HP production reached 6.16 g/L in shake flask fermentations. The constructed strain was then evaluated in fed-batch fermentations, and produced 71.09 g/L 3-HP with a productivity of 0.71 g/L/h and a yield on glucose of 0.23 g/g. Conclusions: In this study, the yeast mitochondrion is reported as an attractive compartment for 3-HP production. The final 3-HP titer of 71.09 g/L with a productivity of 0.71 g/L/h was achieved in fed-batch fermentations, representing the highest titer reported for Saccharomyces cerevisiae so far, that demonstrated the potential of recruiting the yeast mitochondria for further development of cell factories.
|
|
