| 1. |
- Adranno, Brando, et al.
(författare)
-
Broadband white-light-emitting electrochemical cells
- 2023
-
Ingår i: Advanced Photonics Research. - : John Wiley & Sons. - 2699-9293. ; 4:5
-
Tidskriftsartikel (refereegranskat)abstract
- Emerging organic light-emitting devices, such as light-emitting electrochemical cells (LECs), offer a multitude of advantages but currently suffer from that most efficient phosphorescent emitters are based on expensive and rare metals. Herein, it is demonstrated that a rare metal-free salt, bis(benzyltriphenylphosphonium)tetrabromidomanganate(II) ([Ph3PBn]2[MnBr4]), can function as the phosphorescent emitter in an LEC, and that a careful device design results in the fact that such a rare metal-free phosphorescent LEC delivers broadband white emission with a high color rendering index (CRI) of 89. It is further shown that broadband emission is effectuated by an electric-field-driven structural transformation of the original green-light emitter structure into a red-emitting structure.
|
|
| 2. |
|
|
| 3. |
- Adranno, Brando, et al.
(författare)
-
Enhanced stability and complex phase behaviour of organic-inorganic green-emitting ionic manganese halides
- 2023
-
Ingår i: Dalton Transactions. - : Royal Society of Chemistry (RSC). - 1477-9226 .- 1477-9234. ; 52:19, s. 6515-6526
-
Tidskriftsartikel (refereegranskat)abstract
- Light-emitting materials based on earth-abundant metals, such as manganese hold great promise as emitters for organic lighting devices. In order to apply such emitter materials and, in particular, to overcome the problem of self-quenching due to cross-relaxation, we investigated a series of tetrabromidomanganate ([MnBr4]2−) salts with bulky tetraalkylphosphonium counter cations [Pnnn]+, namely [Pnnnn]2[MnBr4] (n = 4 (1), 6 (2) and 8 (3)), which can be obtained by a straightforward reaction of the respective phosphonium bromide and MnBr2. Variation of the cation size allows control of the properties of the resulting ionic materials. 1 and 3 qualify as ionic liquids (ILs), where 1 features a melting point of 68 °C, and 3 is liquid at room temperature and even at very low temperatures. Furthermore, 1 and 2 show the formation of higher-ordered thermotropic mesophases. For 1 a transition to a thermodynamically metastable smectic liquid crystalline phase can be observed at room temperature upon reheating from the metastable glassy state; 2 appears to form a plastic crystalline phase at ∼63 °C, which persists up to the melting point of 235 °C. The photoemission is greatly affected by phase behaviour and ion dynamics. A photoluminescence quantum yield of 61% could be achieved, by balancing the increase in Mn2+-Mn2+ separation and reducing self-quenching through increasingly large organic cations which leads to adverse increased vibrational quenching. Compared to analogous ammonium compounds, which have been promoted as @#x0308;inorganic hybrid perovskite, the phosphonium salts show superior performance, with respect to photoluminescent quantum yield and thermal and air/humidity stability. As the presented compounds are not sensitive to the atmosphere, in particular moisture, and show strong visible electroluminescence in the green region of light, they are important emitter materials for use in organic light-emitting devices.
|
|
| 4. |
- Adranno, Brando, 1993-
(författare)
-
In Light of Ionic Materials : A short exploration of ionic materials for light-related applications
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Ionic liquids (ILs) have been one of the most attractive classes of materials of the last decades. The reason behind this is their peculiar set of properties, which enable their possible application in several research fields. ILs are salts that exhibit a very low melting point, which has been arbitrarily defined to be below 100 °C. Due to their ionic nature, ILs have little to no vapor pressure and they often demonstrate good electrical conductivity and high thermal and electrochemical stability. In this work, the focus is directed toward the exploitation of ILs for the engineering of materials that can have a primary role in light-emitting or light-absorbing devices. Materials belonging to the first type are explored in Papers I-III, while the ones belonging to the second are tackled in Papers IV and V.There has always been a struggle to find a balance between costs and the efficiency of emitting materials for application in dedicated devices. In Papers I-III, two strategies are taken into account to address this issue. Finding inspiration from ionic complexes of Mn(II), newly designed ionic materials and ILs emitting green light are proposed as an alternative to the more expensive heavy metals-based ones such as Ir(III) and Pt(II). Coming closer to an ideal compromise of cost and performance, fully organic and extremely cheap low-melting salts based on the 8-hydroxyquinoline unit were prepared. These compounds revealed efficient fluorescence in the blue region of the spectrum for such simple molecules, paving the way for the preparation of possibly inexpensive light-emitting devices.In Paper IV, direct absorption of light is taken into consideration with photoresponsive ionic liquids, which undergo cis-trans isomerization. Due to this feature and their ionic nature, these materials could be adopted into photoswitches. Additionally, the effect of functional groups on the isomerization of the ILs and on the ability of the materials to undergo mesophase formation was studied.One of the key components of dye-sensitized solar cells is the electrolytic mediator sandwiched between two electrodes. This has been a matter of intense study due to issues regarding its stability, which impair the device's performance. ILs can be adopted in devices to solve this issue. In Paper V, triazolium ILs allowed the manufacturing of devices with higher efficiencies and longer lifetimes than the ones realized with imidazolium relatives. These materials allowed for the stability of the ionic couple I-/I3- and moisture resistance due to their non-hygroscopic nature.
|
|
| 5. |
- Adranno, Brando, et al.
(författare)
-
The 8-hydroxyquinolinium cation as a lead structure for efficient color-tunable ionic small molecule emitting materials
- 2023
-
Ingår i: Advanced Photonics Research. - : John Wiley & Sons. - 2699-9293. ; 4:3
-
Tidskriftsartikel (refereegranskat)abstract
- Albeit tris(8-hydroxyquinolinato) aluminum (Alq3) and its derivatives are prominent emitter materials for organic lighting devices, and the optical transitions occur among ligand-centered states, the use of metal-free 8-hydroxyquinoline is impractical as it suffers from strong nonradiative quenching, mainly through fast proton transfer. Herein, it is shown that the problem of rapid proton exchange and vibration quenching of light emission can be overcome not only by complexation, but also by organization of the 8-hydroxyquinolinium cations into a solid rigid network with appropriate counter-anions (here bis(trifluoromethanesulfonyl)imide). The resulting structure is stiffened by secondary bonding interactions such as pi-stacking and hydrogen bonds, which efficiently block rapid proton transfer quenching and reduce vibrational deactivation. Additionally, the optical properties are tuned through methyl substitution from deep blue (455 nm) to blue-green (488 nm). Time-dependent density functional theory (TDFT) calculations reveal the emission to occur from which an unexpectedly long-lived S-1 level, unusual for organic fluorophores. All compounds show comparable, even superior photoluminescence compared to Alq3 and related materials, both as solids and thin films with quantum yields (QYs) up to 40-50%. In addition, all compounds show appreciable thermal stability with decomposition temperatures above 310 °C.
|
|
| 6. |
|
|
| 7. |
- Bousrez, Guillaume, et al.
(författare)
-
Ionic Liquid-Based Dye-Sensitized Solar Cells-Insights into Electrolyte and Redox Mediator Design
- 2021
-
Ingår i: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 9:24, s. 8107-8114
-
Tidskriftsartikel (refereegranskat)abstract
- A series of asymmetric and symmetric 1,3-dialkyltriazolium iodides were studied with hindsight to their application as electrolytes and redox mediators in dye-sensitized solar cells (DSSCs). Compounds with an alkyl chain length from C4 to C10 present the characteristics of ionic liquids (ILs), whilst those with longer chains exhibit liquid crystallinity. All compounds show an appreciable chemical and thermal stability with decomposition temperatures around 185–195 °C. Testing these compounds as electrolytes and redox mediators in DSSCs reveals significant changes in the properties of the electrolyte upon addition of the redox couple. Addition of iodine generally leads to a depression of the melting point and an enhancement of conductivity. These changes in the electrolyte, which are significant, have so far been largely overlooked in DSSC optimization. Furthermore, in comparison to frequently employed imidazolium iodides, 1-alkyl-3-methyltriazolium iodides show both an improved superior efficiency and an extended cell lifetime. This is attributed to the fact that, unlike the imidazolium salts, the triazolium counterparts are not hygroscopic. The nonhygroscopic nature of the salts also renders device fabrication easier. In addition, electrode passivation, which is commonly observed with imidazolium iodides, could not be noticed for the triazolium analogues, making these materials overall extremely attractive.
|
|
| 8. |
- Bousrez, Guillaume, et al.
(författare)
-
Ready Access to Anhydrous Anionic Lanthanide Acetates by Using Imidazolium Acetate Ionic Liquids as the Reaction Medium
- 2021
-
Ingår i: Chemistry - A European Journal. - : Wiley. - 0947-6539 .- 1521-3765. ; 27:52, s. 13181-13189
-
Tidskriftsartikel (refereegranskat)abstract
- Access to lanthanide acetate coordination compounds is challenged by the tendency of lanthanides to coordinate water and the plethora of acetate coordination modes. A straightforward, reproducible synthetic procedure by treating lanthanide chloride hydrates with defined ratios of the ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([C(2)mim][OAc]) has been developed. This reaction pathway leads to two isostructural crystalline anhydrous coordination complexes, the polymeric [C(2)mim](n)[{Ln(2)(OAc)(7)}(n)] and the dimeric [C(2)mim](2)[Ln(2)(OAc)(8)], based on the ion size and the ratio of IL used. A reaction with an IL : Ln-salt ratio of 5 : 1, where Ln=Nd, Sm, and Gd, led exclusively to the polymer, whilst for the heaviest lanthanides (Dy-Lu) the dimer was observed. Reaction with Eu and Tb resulted in a mixture of both polymeric and dimeric forms. When the amount of IL and/or the size of the cation was increased, the reaction led to only the dimeric compound for all the lanthanide series. Crystallographic analyses of the resulting salts revealed three different types of metal-acetate coordination modes where eta(2)mu kappa(2) is the most represented in both structure types.
|
|
| 9. |
|
|
| 10. |
- Renier, Olivier, et al.
(författare)
-
Photoisomerization and Mesophase Formation in Azo-Ionic Liquids
- 2020
-
Ingår i: Crystal Growth & Design. - : American Chemical Society (ACS). - 1528-7483 .- 1528-7505. ; 20:1, s. 214-225
-
Tidskriftsartikel (refereegranskat)abstract
- Ionic liquids present a versatile, highly tunable class of soft functional materials. Aside from being low melting salts, they can be endowed with additional functionalities. In N-alkylimidazolium halides, which are a prominent class of ionic liquids (ILs), the imidazolium cation was linked via an ether-bridge to an azobenzene unit in order to obtain photoresponsive materials through photoinduced trans-cis isomerization. The azobenzene unit, in turn, was modified with electron-donating or -withdrawing groups such as methyl-, tert-butyl-, methoxy-, N,N-dimethylamino, and nitro groups to study their influence on the photoisomerization and phase behavior. Endowing the imidazolium additionally with a long alkyl chain allows the materials to potentially form liquid crystalline (LC) mesophases before melting into the isotropic liquid. All studied compounds qualify as ionic liquids, and all, except for the nitro-compound, show the formation of smectic mesophases melting to the isotropic liquid. The compounds with the bulkiest aliphatic substituent, the tert-butyl, shows the lowest melting point, the largest mesophase window, and an efficient photochemical trans-cis conversion (>90%). In summary, by tuning sterically and electronically the cationic part of ILs, a photoswitchable room temperature liquid crystal could be developed and design guidelines for photoresponsive ionic liquids could be obtained.
|
|
