1. |
|
|
2. |
- Abelev, Betty, et al.
(författare)
-
Underlying Event measurements in pp collisions at root s=0.9 and 7 TeV with the ALICE experiment at the LHC
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :7
-
Tidskriftsartikel (refereegranskat)abstract
- We present measurements of Underlying Event observables in pp collisions at root s = 0 : 9 and 7 TeV. The analysis is performed as a function of the highest charged-particle transverse momentum p(T),L-T in the event. Different regions are defined with respect to the azimuthal direction of the leading (highest transverse momentum) track: Toward, Transverse and Away. The Toward and Away regions collect the fragmentation products of the hardest partonic interaction. The Transverse region is expected to be most sensitive to the Underlying Event activity. The study is performed with charged particles above three different p(T) thresholds: 0.15, 0.5 and 1.0 GeV/c. In the Transverse region we observe an increase in the multiplicity of a factor 2-3 between the lower and higher collision energies, depending on the track p(T) threshold considered. Data are compared to PYTHIA 6.4, PYTHIA 8.1 and PHOJET. On average, all models considered underestimate the multiplicity and summed p(T) in the Transverse region by about 10-30%.
|
|
3. |
- Abelev, Betty, et al.
(författare)
-
Measurement of prompt J/psi and beauty hadron production cross sections at mid-rapidity in pp collisions at root s=7 TeV
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :11
-
Tidskriftsartikel (refereegranskat)abstract
- The ALICE experiment at the LHC has studied J/psi production at mid-rapidity in pp collisions at root s = 7 TeV through its electron pair decay on a data sample corresponding to an integrated luminosity L-int = 5.6 nb(-1). The fraction of J/psi from the decay of long-lived beauty hadrons was determined for J/psi candidates with transverse momentum p(t) > 1,3 GeV/c and rapidity vertical bar y vertical bar < 0.9. The cross section for prompt J/psi mesons, i.e. directly produced J/psi and prompt decays of heavier charmonium states such as the psi(2S) and chi(c) resonances, is sigma(prompt J/psi) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 8.3 +/- 0.8(stat.) +/- 1.1 (syst.)(-1.4)(+1.5) (syst. pol.) mu b. The cross section for the production of b-hadrons decaying to J/psi with p(t) > 1.3 GeV/c and vertical bar y vertical bar < 0.9 is a sigma(J/psi <- hB) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 1.46 +/- 0.38 (stat.)(-0.32)(+0.26) (syst.) mu b. The results are compared to QCD model predictions. The shape of the p(t) and y distributions of b-quarks predicted by perturbative QCD model calculations are used to extrapolate the measured cross section to derive the b (b) over bar pair total cross section and d sigma/dy at mid-rapidity.
|
|
4. |
- Abolfathi, Bela, et al.
(författare)
-
The Fourteenth Data Release of the Sloan Digital Sky Survey : First Spectroscopic Data from the Extended Baryon Oscillation Spectroscopic Survey and from the Second Phase of the Apache Point Observatory Galactic Evolution Experiment
- 2018
-
Ingår i: Astrophysical Journal Supplement Series. - : IOP Publishing Ltd. - 0067-0049 .- 1538-4365. ; 235:2
-
Tidskriftsartikel (refereegranskat)abstract
- The fourth generation of the Sloan Digital Sky Survey (SDSS-IV) has been in operation since 2014 July. This paper describes the second data release from this phase, and the 14th from SDSS overall (making this Data Release Fourteen or DR14). This release makes the data taken by SDSS-IV in its first two years of operation (2014-2016 July) public. Like all previous SDSS releases, DR14 is cumulative, including the most recent reductions and calibrations of all data taken by SDSS since the first phase began operations in 2000. New in DR14 is the first public release of data from the extended Baryon Oscillation Spectroscopic Survey; the first data from the second phase of the Apache Point Observatory (APO) Galactic Evolution Experiment (APOGEE-2), including stellar parameter estimates from an innovative data-driven machine-learning algorithm known as "The Cannon"; and almost twice as many data cubes from the Mapping Nearby Galaxies at APO (MaNGA) survey as were in the previous release (N = 2812 in total). This paper describes the location and format of the publicly available data from the SDSS-IV surveys. We provide references to the important technical papers describing how these data have been taken (both targeting and observation details) and processed for scientific use. The SDSS web site (www.sdss.org) has been updated for this release and provides links to data downloads, as well as tutorials and examples of data use. SDSS-IV is planning to continue to collect astronomical data until 2020 and will be followed by SDSS-V.
|
|
5. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
6. |
- Cruz, Raquel, et al.
(författare)
-
Novel genes and sex differences in COVID-19 severity
- 2022
-
Ingår i: Human Molecular Genetics. - : Oxford University Press. - 0964-6906 .- 1460-2083. ; 31:22, s. 3789-3806
-
Tidskriftsartikel (refereegranskat)abstract
- Here, we describe the results of a genome-wide study conducted in 11 939 coronavirus disease 2019 (COVID-19) positive cases with an extensive clinical information that were recruited from 34 hospitals across Spain (SCOURGE consortium). In sex-disaggregated genome-wide association studies for COVID-19 hospitalization, genome-wide significance (P < 5 × 10−8) was crossed for variants in 3p21.31 and 21q22.11 loci only among males (P = 1.3 × 10−22 and P = 8.1 × 10−12, respectively), and for variants in 9q21.32 near TLE1 only among females (P = 4.4 × 10−8). In a second phase, results were combined with an independent Spanish cohort (1598 COVID-19 cases and 1068 population controls), revealing in the overall analysis two novel risk loci in 9p13.3 and 19q13.12, with fine-mapping prioritized variants functionally associated with AQP3 (P = 2.7 × 10−8) and ARHGAP33 (P = 1.3 × 10−8), respectively. The meta-analysis of both phases with four European studies stratified by sex from the Host Genetics Initiative (HGI) confirmed the association of the 3p21.31 and 21q22.11 loci predominantly in males and replicated a recently reported variant in 11p13 (ELF5, P = 4.1 × 10−8). Six of the COVID-19 HGI discovered loci were replicated and an HGI-based genetic risk score predicted the severity strata in SCOURGE. We also found more SNP-heritability and larger heritability differences by age (<60 or ≥60 years) among males than among females. Parallel genome-wide screening of inbreeding depression in SCOURGE also showed an effect of homozygosity in COVID-19 hospitalization and severity and this effect was stronger among older males. In summary, new candidate genes for COVID-19 severity and evidence supporting genetic disparities among sexes are provided.
|
|
7. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
8. |
- Engert, Andreas, et al.
(författare)
-
The European Hematology Association Roadmap for European Hematology Research : a consensus document
- 2016
-
Ingår i: Haematologica. - Pavia, Italy : Ferrata Storti Foundation (Haematologica). - 0390-6078 .- 1592-8721. ; 101:2, s. 115-208
-
Tidskriftsartikel (refereegranskat)abstract
- The European Hematology Association (EHA) Roadmap for European Hematology Research highlights major achievements in diagnosis and treatment of blood disorders and identifies the greatest unmet clinical and scientific needs in those areas to enable better funded, more focused European hematology research. Initiated by the EHA, around 300 experts contributed to the consensus document, which will help European policy makers, research funders, research organizations, researchers, and patient groups make better informed decisions on hematology research. It also aims to raise public awareness of the burden of blood disorders on European society, which purely in economic terms is estimated at (sic)23 billion per year, a level of cost that is not matched in current European hematology research funding. In recent decades, hematology research has improved our fundamental understanding of the biology of blood disorders, and has improved diagnostics and treatments, sometimes in revolutionary ways. This progress highlights the potential of focused basic research programs such as this EHA Roadmap. The EHA Roadmap identifies nine 'sections' in hematology: normal hematopoiesis, malignant lymphoid and myeloid diseases, anemias and related diseases, platelet disorders, blood coagulation and hemostatic disorders, transfusion medicine, infections in hematology, and hematopoietic stem cell transplantation. These sections span 60 smaller groups of diseases or disorders. The EHA Roadmap identifies priorities and needs across the field of hematology, including those to develop targeted therapies based on genomic profiling and chemical biology, to eradicate minimal residual malignant disease, and to develop cellular immunotherapies, combination treatments, gene therapies, hematopoietic stem cell treatments, and treatments that are better tolerated by elderly patients.
|
|
9. |
- Ferrando, Carlos, et al.
(författare)
-
Effects of oxygen on post-surgical infections during an individualised perioperative open-lung ventilatory strategy : a randomised controlled trial
- 2020
-
Ingår i: British Journal of Anaesthesia. - : ELSEVIER SCI LTD. - 0007-0912 .- 1471-6771. ; 124:1, s. 110-120
-
Tidskriftsartikel (refereegranskat)abstract
- Background: We aimed to examine whether using a high fraction of inspired oxygen (FIO2) in the context of an individualised intra- and postoperative open-lung ventilation approach could decrease surgical site infection (SSI) in patients scheduled for abdominal surgery. Methods: We performed a multicentre, randomised controlled clinical trial in a network of 21 university hospitals from June 6, 2017 to July 19, 2018. Patients undergoing abdominal surgery were randomly assigned to receive a high (0.80) or conventional (0.3) FIO2 during the intraoperative period and during the first 3 postoperative hours. All patients were mechanically ventilated with an open-lung strategy, which included recruitment manoeuvres and individualised positive end-expiratory pressure for the best respiratory-system compliance, and individualised continuous postoperative airway pressure for adequate peripheral oxyhaemoglobin saturation. The primary outcome was the prevalence of SSI within the first 7 postoperative days. The secondary outcomes were composites of systemic complications, length of intensive care and hospital stay, and 6-month mortality. Results: We enrolled 740 subjects: 371 in the high FIO2 group and 369 in the low FIO2 group. Data from 717 subjects were available for final analysis. The rate of SSI during the first postoperative week did not differ between high (8.9%) and low (9.4%) FIO2 groups (relative risk [RR]: 0.94; 95% confidence interval [CI]: 0.59-1.50; P=0.90]). Secondary outcomes, such as atelectasis (7.7% vs 9.8%; RR: 0.77; 95% CI: 0.48-1.25; P=0.38) and myocardial ischaemia (0.6% [n=2] vs 0% [n=0]; P=0.47) did not differ between groups. Conclusions: An oxygenation strategy using high FIO2 compared with conventional FIO2 did not reduce postoperative SSIs in abdominal surgery. No differences in secondary outcomes or adverse events were found.
|
|
10. |
- Aguilar-Sanchez, Andrea, et al.
(författare)
-
Charged ultrafiltration membranes based on TEMPO-oxidized cellulose nanofibrils/poly(vinyl alcohol) antifouling coating
- 2021
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 11:12, s. 6859-6868
-
Tidskriftsartikel (refereegranskat)abstract
- This study reports the potential of TEMPO-oxidized cellulose nanofibrils (T-CNF)/poly(vinyl alcohol) (PVA) coatings to develop functionalized membranes in the ultrafiltration regime with outstanding antifouling performance and dimensional/pH stability. PVA acts as an anchoring phase interacting with the polyethersulfone (PES) substrate and stabilizing for the hygroscopic T-CNF via crosslinking. The T-CNF/PVA coated PES membranes showed a nano-textured surface, a change in the surface charge, and improved mechanical properties compared to the original PES substrate. A low reduction (4%) in permeance was observed for the coated membranes, attributable to the nanometric coating thickness, surface charge, and hydrophilic nature of the coated layer. The coated membranes exhibited charge specific adsorption driven by electrostatic interaction combined with rejection due to size exclusion (MWCO 530 kDa that correspond to a size of similar to 35-40 nm). Furthermore, a significant reduction in organic fouling and biofouling was found for T-CNF/PVA coated membranes when exposed to BSA and E. coli. The results demonstrate the potential of simple modifications using nanocellulose to manipulate the pore structure and surface chemistry of commercially available membranes without compromising on permeability and mechanical stability.
|
|
11. |
- Aguilar-Sánchez, Andrea, 1987-, et al.
(författare)
-
Nano-cellulose coatings for antifouling and mechanically enhanced polyethersulfone (PES) membranes
- 2019
-
Ingår i: Nordic Polymer Days 2019. ; , s. 92-92
-
Konferensbidrag (refereegranskat)abstract
- Membrane technology is commonly used for filtration processes of industrial wastewater. Using membranes for water filtration is a safe and energy efficient solution. One of the main problems that arises during the usage of membranes is the fouling effects. Fouling increases the membrane separation resistance, reduces productivity due to a flux decline and affect membrane selectivity. These effects can be avoid by modifying the surface of the membranes using bio-based materials such as nano-cellulose. Nano-cellulose is a great example of a material obtained from renewable resources, which provides high reinforcement and antifouling properties to membranes.The aim of this work was the development of coatings with cellulose nano-crystals (CNC) and Tempooxidized cellulose nano-fribrils (T-CNF) using polyvinyl-alcohol (PVOH), as binding phase to enhance mechanical and antifouling properties over pure commercial PES membranes. The coatings were chemically crosslinked to increase mechanical properties and to improve stability of the coating and avoid swelling. It is expected that by avoiding swelling, permeability remains stable through time. All coating formulations remained stable after 10 hours of crossflow filtration. Mechanical properties of the coated membranes were improved in both dry and wet conditions, showing higher values of tensile strenght and E modulus compared to the uncoated ones. In addition, coated membranes showed high hydrophilicity and low adherence of bovine serum albumin (BSA).The coatings developed showed stability over PES membranes and provide them with a nanostructured surface which showed an extended durability in use. The modified surface membranes presented good mechanical properties in dry and wet conditions, high flux, high hydrophilicity, resistance to BSA fouling and to different pH environments. Moreover, these modified membranes showed promising results for fast upscaling at industrial level due to the simplicity of the coating process and the availability of the materials in the market.
|
|
12. |
|
|
13. |
- Aguilar Sánchez, Andrea, 1987-
(författare)
-
Nanopolysaccharide coatings for functional surfaces in water-treatment materials : From mechanisms to process scalability
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In this thesis, materials from renewable resources were used to develop functionalized surfaces for water treatment. The work is thus inspired by, and contributes to, the United Nations sustainable goals of: (i) clean water and sanitation, (ii) climate action, (iii) responsible consumption and production, (iv) life below water, and (v) partnerships for the goals.Nanopolysaccharides, most specifically nanocellulose and nanochitin, are great candidates for functional and renewable materials for multiple applications, including the treatment of water and wastewater. This thesis focused on the formulation of different types of nanopolysaccharide-based coatings to enhance the performance of commercially available membranes and cellulose fabrics. We developed a simple waterborne layer-by-layer cellulose nanocrystals (CNC) and TEMPO-oxidized cellulose nanofibrils (T-CNF) coating for commercially available membranes. By changing the surface and pore structure of the membrane, the coating tuned which substrates could pass through the membrane, improved antifouling performanced, and when derived from T-CNF, it was harmful to bacterial colonization. Considering the observed T-CNF’s effect on bacteria, we developed a chemically crosslinked T-CNF/Poly(vinyl) alcohol (PVA) coating with outstanding antibiofouling performance, ion adsorption/rejection combined with size exclusion, and with dimensional and pH stability. Furthermore, we used a surface-impregnation approach based on bio-based nanotechnology which resulted in highly efficient, with improved mechanical properties, and fully bio-based high-flux water filtration membranes using commercially available nonwoven fabrics. Membranes with coatings prepared from CNC, chitin nanocrystals (ChNC) and T-CNF separated particles in the size range of bacteria and viruses, and those prepared from also T-CNF showed high microplastic filtration efficiency. Moreover, membrane coating based on ChNC and T-CNF had outstanding antibacterial properties.Overall, we demonstrated that nanopolysaccharide coatings on membranes could provide a significant reduction in organic fouling and biofilm formation while enabling the adsorption of ions and separation of microplastics. In the case of biofilm formation, the functional group and surface charge of the different nanopolysaccharides determined the effect over bacteria, indicating that surfaces could be tailored against microbes. In addition, we directly compared the effect of the different nanopolysaccharides of interest (CNC, T-CNF, ligno-celullose nanocrystals (L-CNC), and ChNC) on bacterial viability and biofilm formation, and found a great difference between the different types of nanocellulose and a different mechanism for nanochitin. Thorough, none of the nanopolysaccharides displayed cytotoxic effects while in indirect contact with the bacterial cells. Nevertheless, T-CNF, ChNC and L-CNC showed a cytostatic effect on bacterial proliferation. Furthermore, the nanomechanical properties of the bacterial cells and interacting forces between the nanopolysaccharides and Escherichia coli (E. coli) were affected when in direct contact with the nanopolysaccharide surfaces.Lastly, we upscaled one of our coating processes, demonstrating that the method could be easily implemented at an industrial level. The impact of this thesis relies on the effectiveness of the coatings, the different types of functionalities observed, the demonstrated fast implementation at an industrial scale, and the potential to extrapolate this technology to other applications.
|
|
14. |
|
|
15. |
- Aguilar-Sanchez, Andrea, et al.
(författare)
-
Waterborne nanocellulose coatings for improving the antifouling and antibacterial properties of polyethersulfone membranes
- 2021
-
Ingår i: Journal of Membrane Science. - : Elsevier BV. - 0376-7388 .- 1873-3123. ; 620
-
Tidskriftsartikel (refereegranskat)abstract
- This article presents a waterborne nanocellulose coating process to change the surface characteristics and mitigate fouling of commercially available polyethersulfone (PES) microfiltration membranes. An extensive comparative study between nanoporous and nano-textured layers composed of cellulose nanocrystals (CNC) or TEMPO-oxidized cellulose nanofibrils (T-CNF), which were coated on the PES membrane by taking advantage of the electrostatic interactions between the PES substrate, a polyallylamine hydrochloride (PAHC1) anchoring layer, and the nanocellulose functional layer. Coated PES membranes exhibited decreased surface roughness and pore sizes as well as rejection of compounds with a M-w above 150 kDa, while the water permeability and mechanical properties of remained largely unaffected. The coatings improved the wettability as confirmed by a reduction of the contact angle by up to 52% and exhibited a higher negative surface charge compared to the uncoated membranes over a pH range of 4-8. A significant reduction in organic fouling was observed for the coated membranes demonstrated by bovine serum albumin (BSA) adsorption studies on T-CNF and CNC surfaces using Quartz Crystal Microbalance with Dissipation monitoring (QCM-D), UV-vis spectroscopy and FTIR mapping after exposing the membranes to dynamic adsorption of BSA. The T-CNF coating exhibited effective antibacterial action against Escherichia coli (E. coli) attributed to the pH reduction effect induced by the carboxyl groups; while CNC coatings did not show this property. This work demonstrates a simple, green, and easy-to-scale layer-by-layer coating process to tune the membrane rejection and to improve antifouling and antibacterial properties of commercially available membranes.
|
|
16. |
- Bentham, James, et al.
(författare)
-
A century of trends in adult human height
- 2016
-
Ingår i: eLIFE. - 2050-084X. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.522.7) and 16.5 cm (13.319.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
17. |
- Bentham, James, et al.
(författare)
-
A century of trends in adult human height
- 2016
-
Ingår i: eLIFE. - : eLife Sciences Publications Ltd. - 2050-084X. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.5–22.7) and 16.5 cm (13.3– 19.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8– 144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
18. |
- Danaei, Goodarz, et al.
(författare)
-
Effects of diabetes definition on global surveillance of diabetes prevalence and diagnosis: a pooled analysis of 96 population-based studies with 331288 participants
- 2015
-
Ingår i: The Lancet Diabetes & Endocrinology. - 2213-8595 .- 2213-8587. ; 3:8, s. 624-637
-
Tidskriftsartikel (refereegranskat)abstract
- Background Diabetes has been defined on the basis of different biomarkers, including fasting plasma glucose (FPG), 2-h plasma glucose in an oral glucose tolerance test (2hOGTT), and HbA(1c). We assessed the effect of different diagnostic definitions on both the population prevalence of diabetes and the classification of previously undiagnosed individuals as having diabetes versus not having diabetes in a pooled analysis of data from population-based health examination surveys in different regions. Methods We used data from 96 population-based health examination surveys that had measured at least two of the biomarkers used for defining diabetes. Diabetes was defined using HbA(1c) (HbA(1c) >= 6 . 5% or history of diabetes diagnosis or using insulin or oral hypoglycaemic drugs) compared with either FPG only or FPG-or-2hOGTT definitions (FPG >= 7 . 0 mmol/L or 2hOGTT >= 11 . 1 mmol/L or history of diabetes or using insulin or oral hypoglycaemic drugs). We calculated diabetes prevalence, taking into account complex survey design and survey sample weights. We compared the prevalences of diabetes using different definitions graphically and by regression analyses. We calculated sensitivity and specificity of diabetes diagnosis based on HbA1c compared with diagnosis based on glucose among previously undiagnosed individuals (ie, excluding those with history of diabetes or using insulin or oral hypoglycaemic drugs). We calculated sensitivity and specificity in each survey, and then pooled results using a random-effects model. We assessed the sources of heterogeneity of sensitivity by meta-regressions for study characteristics selected a priori. Findings Population prevalence of diabetes based on FPG- or-2hOGTT was correlated with prevalence based on FPG alone (r= 0 . 98), but was higher by 2-6 percentage points at different prevalence levels. Prevalence based on HbA(1c) was lower than prevalence based on FPG in 42 . 8% of age-sex-survey groups and higher in another 41 . 6%; in the other 15 . 6%, the two definitions provided similar prevalence estimates. The variation across studies in the relation between glucose-based and HbA(1c)-based prevalences was partly related to participants' age, followed by natural logarithm of per person gross domestic product, the year of survey, mean BMI, and whether the survey population was national, subnational, or from specific communities. Diabetes defined as HbA(1c) 6 . 5% or more had a pooled sensitivity of 52 . 8% (95% CI 51 . 3-54 . 3%) and a pooled specificity of 99 . 74% (99 . 71-99 . 78%) compared with FPG 7 . 0 mmol/L or more for diagnosing previously undiagnosed participants; sensitivity compared with diabetes defined based on FPG-or-2hOGTT was 30 . 5% (28 . 7-32 . 3%). None of the preselected study-level characteristics explained the heterogeneity in the sensitivity of HbA(1c) versus FPG. Interpretation Different biomarkers and definitions for diabetes can provide different estimates of population prevalence of diabetes, and differentially identify people without previous diagnosis as having diabetes. Using an HbA(1c)-based definition alone in health surveys will not identify a substantial proportion of previously undiagnosed people who would be considered as having diabetes using a glucose-based test.
|
|
19. |
|
|
20. |
- Fijoł, Natalia, et al.
(författare)
-
3D-printable biopolymer-based materials for water treatment : A review
- 2022
-
Ingår i: Chemical Engineering Journal. - : Elsevier BV. - 1385-8947 .- 1873-3212. ; 430
-
Forskningsöversikt (refereegranskat)abstract
- The global environmental concerns drive scientists all over the world to develop eco-friendly and sustainable alternatives to techniques and materials commonly used until now for water treatment applications. The relatively novel Additive manufacturing (AM) technology allows to process materials in a custom optimized, cost and time effective manner, while use of biobased materials minimizes the secondary pollution issue. Combining three-dimensional (3D) printing technology and biopolymer-based materials refines the water treatment industry, as it provides tailored water filtration systems easily available in the disadvantaged areas at low environmental impact and cost due to the raw materials' bio-origin and abundance. This review highlights the combination of various 3D printing techniques such as Fused deposition modelling (FDM), Direct ink wetting (DIW) and Stereolitography (SLA) with nature-derived biopolymers and biopolymerbased materials including chitosan, Polylactic acid (PLA), alginate and Cellulose acetate (CA) for their potential application within the water treatment industry with emphasis on oil separation and metal removal. Moreover, the environmental impact of the revised biopolymers is briefly discussed.
|
|
21. |
- Fijoł, Natalia, 1994-, et al.
(författare)
-
3D printed polylactic acid (PLA) filters reinforced with polysaccharide nanofibers for metal ions capture and microplastics separation from water
- 2023
-
Ingår i: Chemical Engineering Journal. - : Elsevier BV. - 1385-8947 .- 1873-3212. ; 457
-
Tidskriftsartikel (refereegranskat)abstract
- The need for multifunctional, robust, reusable, and high-flux filters is a constant challenge for sustainable water treatment. In this work, fully biobased and biodegradable water purification filters were developed and processed by the means of three-dimensional (3D) printing, more specifically by fused deposition modelling (FDM).The polylactic acid (PLA) – based composites reinforced with homogenously dispersed TEMPO-oxidized cellulose nanofibers (TCNF) or chitin nanofibers (ChNF) were prepared within a four-step process; i. melt blending, ii. thermally induced phase separation (TIPS) pelletization method, iii. freeze drying and iv. single-screw extrusion to 3D printing filaments. The monolithic, biocomposite filters were 3D printed in cylindrical as well as hourglass geometries with varying, multiscale pore architectures. The filters were designed to control the contact time between filter’s active surfaces and contaminants, tailoring their permeance.All printed filters exhibited high print quality and high water throughput as well as enhanced mechanical properties, compared to pristine PLA filters. The improved toughness values of the biocomposite filters clearly indicate the reinforcing effect of the homogenously dispersed nanofibers (NFs). The homogenous dispersion is attributed to the TIPS method. The NFs effect is also reflected in the adsorption capacity of the filters towards copper ions, which was shown to be as high as 234 and 208 mg/gNF for TCNF and ChNF reinforced filters, respectively, compared to just 4 mg/g for the pure PLA filters. Moreover, the biocomposite-based filters showed higher potential for removal of microplastics from laundry effluent water when compared to pure PLA filters with maximum separation efficiency of 54 % and 35 % for TCNF/PLA and ChNF/PLA filters, respectively compared to 26 % for pure PLA filters, all that while maintaining their high permeance.The combination of environmentally friendly materials with a cost and time-effective technology such as FDM allows the development of customized water filtration systems, which can be easily adapted in the areas most affected by the inaccessibility of clean water.
|
|
22. |
- Jalvo, Blanca, et al.
(författare)
-
Water Filtration Membranes Based on Non-Woven Cellulose Fabrics : Effect of Nanopolysaccharide Coatings on Selective Particle Rejection, Antifouling, and Antibacterial Properties
- 2021
-
Ingår i: Nanomaterials. - : MDPI AG. - 2079-4991. ; 11:7
-
Tidskriftsartikel (refereegranskat)abstract
- This article presents a comparative study of the surface characteristics and water purification performance of commercially available cellulose nonwoven fabrics modified, via cast coating, with different nano-dimensioned bio-based carbohydrate polymers, viz. cellulose nanocrystals (CNC), TEMPO-oxidized cellulose nanofibers (T-CNF), and chitin nanocrystals (ChNC). The surface-modified nonwoven fabrics showed an improvement in wettability, surface charge modification, and a slight decrease of maximum pore size. The modification improved the water permeance in most of the cases, enhanced the particle separation performance in a wide range of sizes, upgraded the mechanical properties in dry conditions, and showed abiotic antifouling capability against proteins. In addition, T-CNF and ChNC coatings proved to be harmful to the bacteria colonizing on the membranes. This simple surface impregnation approach based on green nanotechnology resulted in highly efficient and fully bio-based high-flux water filtration membranes based on commercially available nonwoven fabrics, with distinct performance for particle rejection, antifouling and antibacterial properties.
|
|
23. |
- Magaña, Ilse, et al.
(författare)
-
Bioelastomers : current state of development
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 10:10, s. 5019-5043
-
Forskningsöversikt (refereegranskat)abstract
- Considering the current trend of finding sustainable alternatives to the existing fossil-based plastics, in this review we describe what makes a bioelastomer “bio” and what this implies in terms of materials design. We analyze the current state of development of bioelastomers, including the most important types, their current and upcoming use, and their synthetic pathways. Moreover, we provide a general landscape of the hybridization or composite preparation of elastomers to acquire specific functionalities and their implementation in advanced applications, focusing mainly on electronics and biomedicine. Furthermore, we show how through the use of bioelastomers, one can, besides helping the environment, achieve materials with exceptional performances (e.g., very high mechanical properties and/or self-healing properties), which can be processed via novel techniques such as 3/4D-(bio)printing.
|
|
24. |
- Pöhler, Tiina, et al.
(författare)
-
Pilot-scale modification of polyethersulfone membrane with a size and charge selective nanocellulose layer
- 2022
-
Ingår i: Separation and Purification Technology. - : Elsevier BV. - 1383-5866 .- 1873-3794. ; 285
-
Tidskriftsartikel (refereegranskat)abstract
- The utilisation of plant-derived nanoscale cellulosic materials (cellulose nanofibrils, CNF) in tailoring water purification membranes is constantly gaining interest in the context of green-functionalised membrane solutions. However, most of the existing approaches based on renewable and biobased materials suffer from the lack of efficient and scalable processing strategies. Here, we introduce a roll-to-roll membrane modification approach based on thin submicron nanocellulose coatings (400–800 nm) to manufacture anti-biofouling membranes with size and charge dependent selectivity using unit operations compatible with existing industrial lines. We turned a commercial polymeric polyethersulfone (PES) microfiltration membrane into highly hydrophilic and tight membrane structure by applying thin and water-durable cellulose nanofibril layers using cast or spray coating methods. Nanocellulose coated membranes exhibited water permeance values of 80 – 100 LMH/MPa with the highest rejection levels of > 90% for Cytochrome C. Furthermore, the nanocellulose layers were able to withstand relatively high filtration pressure levels of 1 MPa, indicating that the selected procedures to improve mechanical integrity i.e. polyethylene imine-based anchoring and acid induced CNF cross-linking were successful. The coated membranes with the thinnest nanocellulose layer exhibited a molecular weight cut-off (MWCO) of 2 kDa for negatively charged polystyrene sulfonate and 14 kDa for neutral dextrane indicating charge selective behaviour. It can be concluded that our nanocellulose coated PES membranes represent nanofiltration membranes and lower boundary of ultrafiltration membranes with clear anti-biofouling performance directly evidenced via systematic bovine serum albumin (BSA) adsorption investigations. Our approach paves the way towards tunable and sustainable water treatment technologies simultaneously opening space for novel biobased solutions in membrane sector.
|
|
25. |
- Valencia, Luis, 1990-, et al.
(författare)
-
Bio-based Micro-/Meso-/Macroporous Hybrid Foams with Ultrahigh Zeolite Loadings for Selective Capture of Carbon Dioxide
- 2019
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 11:43, s. 40424-40431
-
Tidskriftsartikel (refereegranskat)abstract
- Microporous (<2 nm) crystalline aluminosilicates in the form of zeolites offer a great potential as efficient adsorbents for atmospheric CO2 in the eminent battle against global warming and climate change. The processability of conventional zeolite powders is, however, poor, which limits their implementation in many applications, such as in gas filtration industrial systems. In this work, we overcome this issue through the preparation of hybrid foams using mesoporous/macroporous supporting materials based on the strong network properties of gelatin/nanocellulose, which can support ultrahigh loadings of silicalite-1, used as a model sorbent nanomaterial. We achieved up to 90 wt % of zeolite content and a microporous/mesoporous/macroporous hybrid material. The application of hybrid foams for selective CO2 sorption exhibits a linear relationship between the zeolite content and CO2 adsorption capacity and high selectivity over N2, where the gelatin/nanocellulose foam efficiently supports the zeolite crystals without apparently blocking their pores.
|
|
26. |
- Zhou, Bin, et al.
(författare)
-
Worldwide trends in diabetes since 1980: A pooled analysis of 751 population-based studies with 4.4 million participants
- 2016
-
Ingår i: The Lancet. - : Elsevier B.V.. - 0140-6736 .- 1474-547X. ; 387:10027, s. 1513-1530
-
Tidskriftsartikel (refereegranskat)abstract
- Background: One of the global targets for non-communicable diseases is to halt, by 2025, the rise in the age standardised adult prevalence of diabetes at its 2010 levels. We aimed to estimate worldwide trends in diabetes, how likely it is for countries to achieve the global target, and how changes in prevalence, together with population growth and ageing, are aff ecting the number of adults with diabetes.Methods: We pooled data from population-based studies that had collected data on diabetes through measurement of its biomarkers. We used a Bayesian hierarchical model to estimate trends in diabetes prevalence-defined as fasting plasma glucose of 7.0 mmol/L or higher, or history of diagnosis with diabetes, or use of insulin or oral hypoglycaemic drugs-in 200 countries and territories in 21 regions, by sex and from 1980 to 2014. We also calculated the posterior probability of meeting the global diabetes target if post-2000 trends continue.Findings: We used data from 751 studies including 4372000 adults from 146 of the 200 countries we make estimates for. Global age-standardised diabetes prevalence increased from 4.3% (95% credible interval 2.4-17.0) in 1980 to 9.0% (7.2-11.1) in 2014 in men, and from 5.0% (2.9-7.9) to 7.9% (6.4-9.7) in women. The number of adults with diabetes in the world increased from 108 million in 1980 to 422 million in 2014 (28.5% due to the rise in prevalence, 39.7% due to population growth and ageing, and 31.8% due to interaction of these two factors). Age-standardised adult diabetes prevalence in 2014 was lowest in northwestern Europe, and highest in Polynesia and Micronesia, at nearly 25%, followed by Melanesia and the Middle East and north Africa. Between 1980 and 2014 there was little change in age-standardised diabetes prevalence in adult women in continental western Europe, although crude prevalence rose because of ageing of the population. By contrast, age-standardised adult prevalence rose by 15 percentage points in men and women in Polynesia and Micronesia. In 2014, American Samoa had the highest national prevalence of diabetes (>30% in both sexes), with age-standardised adult prevalence also higher than 25% in some other islands in Polynesia and Micronesia. If post-2000 trends continue, the probability of meeting the global target of halting the rise in the prevalence of diabetes by 2025 at the 2010 level worldwide is lower than 1% for men and is 1% for women. Only nine countries for men and 29 countries for women, mostly in western Europe, have a 50% or higher probability of meeting the global target.Interpretation: Since 1980, age-standardised diabetes prevalence in adults has increased, or at best remained unchanged, in every country. Together with population growth and ageing, this rise has led to a near quadrupling of the number of adults with diabetes worldwide. The burden of diabetes, both in terms of prevalence and number of adults aff ected, has increased faster in low-income and middle-income countries than in high-income countries.
|
|