| 1. |
- Ahmad, Ikhlas, et al.
(författare)
-
Highly Compact GCPW-Fed Multi-Branch Structure Multi-Band Antenna for Wireless Applications
- 2022
-
Ingår i: International Journal of Antennas and Propagation. - : Hindawi Limited. - 1687-5869 .- 1687-5877. ; 2022, s. 1-9
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, we present a highly compact multi-branch structure multi-band antenna with a grounded coplanar waveguide (GCPW)-fed structure printed on 26 x 13 x 1.6 mm(3) sized FR-4 substrate having dielectric constant epsilon r of 4.3 and loss tangent delta of 0.02. In the proposed antenna, five branches are extended from the main radiator to provide multi-band behavior. Two branches are introduced at the upper end of the main radiator, effectively covering the lower bands, while the other three branches are introduced near the center of the main radiator to extend operation to higher bands. The designed antenna covers five different bands: 2.4 GHz, 4.5 GHz, 5.5 GHz, 6.5 GHz, and 7.8 GHz, with respective gain values of 1.34, 1.60, 1.83, 1.80, and 3.50 dBi and respective radiation efficiency values of 90, 88, 84, 75, and 89%. The antenna shows a good impedance bandwidth, ranging from 170 MHz to 3070 MHz. The proposed antenna is simulated in CST Microwave Studio, while its performance is experimentally validated by the fabrication and testing process. The antenna has potential applications for IoT, sub-6 GHz 5G and WLAN (both enablers for IoT), C-band, and X-band services.
|
|
| 2. |
- Alharbi, Abdullah G., et al.
(författare)
-
Novel MIMO Antenna System for Ultra Wideband Applications
- 2022
-
Ingår i: Applied Sciences. - : MDPI AG. - 2076-3417. ; 12:7
-
Tidskriftsartikel (refereegranskat)abstract
- The design of a 4 x 4 MIMO antenna for UWB communication systems is presented in this study. The single antenna element is comprised of a fractal circular ring structure backed by a modified partial ground plane having dimensions of 30 x 30 mm(2). The single antenna element has a wide impedance bandwidth of 9.33 GHz and operates from 2.67 GHz to 12 GHz. Furthermore, the gain of a single antenna element increases as the frequency increases, with a peak realized gain and antenna efficiency of 5 dBi and >75%, respectively. For MIMO applications, a 4 x 4 array is designed and analyzed. The antenna elements are positioned in a plus-shaped configuration to provide pattern as well as polarization diversity. It is worth mentioning that good isolation characteristics are achieved without the utilization of any isolation enhancement network. The proposed MIMO antenna was fabricated and tested, and the results show that it provides UWB response from 2.77 GHz to over 12 GHz. The isolation between the antenna elements is more than 15 dB. Based on performance attributes, it can be said that the proposed design is suitable for UWB MIMO applications.
|
|
| 3. |
- Alibakhshikenari, Mohammad, et al.
(författare)
-
Broadband 3-D shared aperture high isolation nine-element antenna array for on-demand millimeter-wave 5G applications
- 2022
-
Ingår i: Optik (Stuttgart). - : Elsevier BV. - 0030-4026 .- 1618-1336. ; 267
-
Tidskriftsartikel (refereegranskat)abstract
- The paper presents the results of a novel 3-D shared aperture 3 x 3 matrix antenna-array for 26 GHz band 5 G wireless networks. Radiation elements constituting the array are hexagonal-shaped patches that are elevated above the common dielectric substrate by 3.35 mm and excited through a metallic rod of 0.4 mm diameter. The rod protrudes through the substrate of 0.8 mm thickness. It is shown that by isolating each radiating element in the array with a wall suppresses unwanted electromagnetic (EM) wave interactions, resulting in improvement in the antenna's impedance matching and radiation characteristics. Moreover, the results show that by embedding hexagonalshaped slots in the patches improve the antenna's gain and radiation efficiency performance. The subwavelength length slots in the patches essentially transform the radiating elements to exhibit metasurface characteristics when the array is illuminated by EM-waves. The proposed array structure has an average gain and radiation efficiency of 20 dBi and 93%, respectively, across 24.0-28.4 GHz. The isolation between its radiation elements is greater than 22 dB. Compared to the unslotted array the improvement in isolation between radiating elements is greater than 11 dB, and the gain and efficiency are better than 10.5 dBi, and 25%, respectively. The compact array has a fractional bandwidth of 16% and a form factor of 20 x 20 x 3.35 mm(3).
|
|
