| 1. |
- Abbafati, Cristiana, et al.
(författare)
-
- 2020
-
Tidskriftsartikel (refereegranskat)
|
|
| 2. |
- Thomas, HS, et al.
(författare)
-
- 2019
-
swepub:Mat__t
|
|
| 3. |
|
|
| 4. |
- Kanai, M, et al.
(författare)
-
- 2023
-
swepub:Mat__t
|
|
| 5. |
|
|
| 6. |
- Tran, K. B., et al.
(författare)
-
The global burden of cancer attributable to risk factors, 2010-19: a systematic analysis for the Global Burden of Disease Study 2019
- 2022
-
Ingår i: Lancet. - 0140-6736. ; 400:10352, s. 563-591
-
Tidskriftsartikel (refereegranskat)abstract
- Background Understanding the magnitude of cancer burden attributable to potentially modifiable risk factors is crucial for development of effective prevention and mitigation strategies. We analysed results from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019 to inform cancer control planning efforts globally. Methods The GBD 2019 comparative risk assessment framework was used to estimate cancer burden attributable to behavioural, environmental and occupational, and metabolic risk factors. A total of 82 risk-outcome pairs were included on the basis of the World Cancer Research Fund criteria. Estimated cancer deaths and disability-adjusted life-years (DALYs) in 2019 and change in these measures between 2010 and 2019 are presented. Findings Globally, in 2019, the risk factors included in this analysis accounted for 4.45 million (95% uncertainty interval 4.01-4.94) deaths and 105 million (95.0-116) DALYs for both sexes combined, representing 44.4% (41.3-48.4) of all cancer deaths and 42.0% (39.1-45.6) of all DALYs. There were 2.88 million (2.60-3.18) risk-attributable cancer deaths in males (50.6% [47.8-54.1] of all male cancer deaths) and 1.58 million (1.36-1.84) risk-attributable cancer deaths in females (36.3% [32.5-41.3] of all female cancer deaths). The leading risk factors at the most detailed level globally for risk-attributable cancer deaths and DALYs in 2019 for both sexes combined were smoking, followed by alcohol use and high BMI. Risk-attributable cancer burden varied by world region and Socio-demographic Index (SDI), with smoking, unsafe sex, and alcohol use being the three leading risk factors for risk-attributable cancer DALYs in low SDI locations in 2019, whereas DALYs in high SDI locations mirrored the top three global risk factor rankings. From 2010 to 2019, global risk-attributable cancer deaths increased by 20.4% (12.6-28.4) and DALYs by 16.8% (8.8-25.0), with the greatest percentage increase in metabolic risks (34.7% [27.9-42.8] and 33.3% [25.8-42.0]). Interpretation The leading risk factors contributing to global cancer burden in 2019 were behavioural, whereas metabolic risk factors saw the largest increases between 2010 and 2019. Reducing exposure to these modifiable risk factors would decrease cancer mortality and DALY rates worldwide, and policies should be tailored appropriately to local cancer risk factor burden. Copyright (C) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.
|
|
| 7. |
- Niemi, MEK, et al.
(författare)
-
- 2021
-
swepub:Mat__t
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
- Ikuta, K. S., et al.
(författare)
-
Global mortality associated with 33 bacterial pathogens in 2019: a systematic analysis for the Global Burden of Disease Study 2019
- 2022
-
Ingår i: Lancet. - : Elsevier BV. - 0140-6736. ; 400:10369, s. 2221-2248
-
Tidskriftsartikel (refereegranskat)abstract
- Background Reducing the burden of death due to infection is an urgent global public health priority. Previous studies have estimated the number of deaths associated with drug-resistant infections and sepsis and found that infections remain a leading cause of death globally. Understanding the global burden of common bacterial pathogens (both susceptible and resistant to antimicrobials) is essential to identify the greatest threats to public health. To our knowledge, this is the first study to present global comprehensive estimates of deaths associated with 33 bacterial pathogens across 11 major infectious syndromes. Methods We estimated deaths associated with 33 bacterial genera or species across 11 infectious syndromes in 2019 using methods from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019, in addition to a subset of the input data described in the Global Burden of Antimicrobial Resistance 2019 study. This study included 343 million individual records or isolates covering 11 361 study-location-years. We used three modelling steps to estimate the number of deaths associated with each pathogen: deaths in which infection had a role, the fraction of deaths due to infection that are attributable to a given infectious syndrome, and the fraction of deaths due to an infectious syndrome that are attributable to a given pathogen. Estimates were produced for all ages and for males and females across 204 countries and territories in 2019. 95% uncertainty intervals (UIs) were calculated for final estimates of deaths and infections associated with the 33 bacterial pathogens following standard GBD methods by taking the 2.5th and 97.5th percentiles across 1000 posterior draws for each quantity of interest. Findings From an estimated 13.7 million (95% UI 10.9-17.1) infection-related deaths in 2019, there were 7.7 million deaths (5.7-10.2) associated with the 33 bacterial pathogens (both resistant and susceptible to antimicrobials) across the 11 infectious syndromes estimated in this study. We estimated deaths associated with the 33 bacterial pathogens to comprise 13.6% (10.2-18.1) of all global deaths and 56.2% (52.1-60.1) of all sepsis-related deaths in 2019. Five leading pathogens-Staphylococcus aureus, Escherichia coli, Streptococcus pneumoniae, Klebsiella pneumoniae, and Pseudomonas aeruginosa-were responsible for 54.9% (52.9-56.9) of deaths among the investigated bacteria. The deadliest infectious syndromes and pathogens varied by location and age. The age-standardised mortality rate associated with these bacterial pathogens was highest in the sub-Saharan Africa super-region, with 230 deaths (185-285) per 100 000 population, and lowest in the high-income super-region, with 52.2 deaths (37.4-71.5) per 100 000 population. S aureus was the leading bacterial cause of death in 135 countries and was also associated with the most deaths in individuals older than 15 years, globally. Among children younger than 5 years, S pneumoniae was the pathogen associated with the most deaths. In 2019, more than 6 million deaths occurred as a result of three bacterial infectious syndromes, with lower respiratory infections and bloodstream infections each causing more than 2 million deaths and peritoneal and intra-abdominal infections causing more than 1 million deaths. Interpretation The 33 bacterial pathogens that we investigated in this study are a substantial source of health loss globally, with considerable variation in their distribution across infectious syndromes and locations. Compared with GBD Level 3 underlying causes of death, deaths associated with these bacteria would rank as the second leading cause of death globally in 2019; hence, they should be considered an urgent priority for intervention within the global health community. Strategies to address the burden of bacterial infections include infection prevention, optimised use of antibiotics, improved capacity for microbiological analysis, vaccine development, and improved and more pervasive use of available vaccines. These estimates can be used to help set priorities for vaccine need, demand, and development. Copyright (c) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
- Glasbey, JC, et al.
(författare)
-
- 2021
-
swepub:Mat__t
|
|
| 18. |
- Ali, Salamat, et al.
(författare)
-
Experimental and Theoretical Aspects of MXenes-Based Energy Storage and Energy Conversion Devices
- 2023
-
Ingår i: Journal of Chemistry and Environment. - : Science Research Publishers (SRP). - 2959-0132. ; 2:2, s. 54-81
-
Forskningsöversikt (refereegranskat)abstract
- Transition metal carbides, nitrides, and carbonitrides (MXenes) have become an appealing framework for developing various energy applications. MXenes with van der Waals (vdW) interactions are facile, highly efficient, affordable, and self-assembled features that improve energy density. MXenes exhibit large surface area, high electric conductivity, and excellent electrochemical characteristics for various energy applications. This review summarizes and emphasizes the current developments in MXene with improved performance for energy storage or conversion devices, including supercapacitors (SCs), various types of rechargeable batteries (RBs), solar cells, and fuel cells. We discuss the crystal structures of MXenes properties of MXenes and briefly discuss them for different types of energy applications. Finally, the critical outlook and perspective for the MXene progress for applications in energy applications are also described.
|
|
| 19. |
- Ali Soomro, Razium, et al.
(författare)
-
Glycine-assisted preparation of Co3O4 nanoflakes with enhanced performance for non-enzymatic glucose sensing
- 2015
-
Ingår i: MATERIALS EXPRESS. - : AMER SCIENTIFIC PUBLISHERS. - 2158-5849. ; 5:5, s. 437-444
-
Tidskriftsartikel (refereegranskat)abstract
- In this study a simple, inexpensive and efficient route is proposed to synthesise attractive cobalt oxide (Co3O4) nanostructures using glycine as an effective growth controller and regulator. The as-synthesised Co3O4 nanostructures were observed to possess unique nanoflake shape morphological features with highly dense distribution. The formation of Co3O4 nanoflakes (Co3O4 NFKs) was elaborately explored using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Scanning electron microscopy (SEM) respectively. The unique Co3O4 nanoflakes were known to possess excellent electro-catalytic potential for the oxidation of glucose in alkaline medium. This potential property allowed successful development of highly sensitive (1180 mu A mM(-1) cm(-2)), selective and stable non-enzymatic glucose sensor. In addition, the developed sensor had a wide working range (0.1-5.0 mM), low limit of detection (0.7 mu M), and excellent reproducibility, besides the capability of analysing real blood glucose samples.
|
|
| 20. |
- Chabuk, Ali, et al.
(författare)
-
Water quality assessment along Tigris River (Iraq) using water quality index (WQI) and GIS software
- 2020
-
Ingår i: Arabian Journal of Geosciences. - Switzerland : Springer. - 1866-7511 .- 1866-7538. ; 13:14
-
Tidskriftsartikel (refereegranskat)abstract
- Most of the third world countries having rivers passing through them suffer from the water contaminant problem. This problem is considered so difficult to get the water quality within the standard allowable limits for drinking, as well as for industrial and agricultural purposes. This research aims to assess the water quality of the Tigris River using the water quality index method and GIS software. Twelve parameters (Ca, Mg, Na, K, Cl, SO4, HCO3, TH, TDS, BOD5, NO3, and EC) were taken from 14 stations along the river. The weighted arithmetic method was applied to compute the water quality index (WQI). The interpolation method (IDW) was applied in ArcGIS 10.5 to produce the prediction maps for 12 parameters at 11 stations along the Tigris River during the wet and dry seasons in 2016. The regression prediction was applied on three stations in the Tigris River between observed values and predicted values, from the prediction maps, in both seasons. The results showed that the regression prediction for all parameters was given the acceptable values of the determination coefficient (R2). Furthermore, the state of water quality for the Tigris River was degraded downstream of the Tigris River, especially at the station (8) in Aziziyah in the wet and dry seasons and increase degradation clearly at Qurnah (Basrah province) in the south of Iraq. This paper considers the whole length of the Tigris River for the study. This is important to give comprehensive knowledge about the contamination reality of the river. Such that it becomes easier to understand the problem of contamination, analyze it, and then find the suitable treatments and solutions.
|
|
| 21. |
- Chabuk, Ali, et al.
(författare)
-
Water Quality Variation Along the Tigris River
- 2022
-
Ingår i: CAJG 2019: New Prospects in Environmental Geosciences and Hydrogeosciences. - Cham : Springer. ; , s. 447-450
-
Konferensbidrag (refereegranskat)
|
|
| 22. |
- Dalmar, Abdirisak Ahmed, et al.
(författare)
-
Rebuilding research capacity in fragile states : the case of a Somali-Swedish global health initiative
- 2017
-
Ingår i: Global Health Action. - Abingdon : Informa UK Limited. - 1654-9716 .- 1654-9880. ; 10:1
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents an initiative to revive the previous Somali-Swedish Research Cooperation, which started in 1981 and was cut short by the civil war in Somalia. A programme focusing on research capacity building in the health sector is currently underway through the work of an alliance of three partner groups: six new Somali universities, five Swedish universities, and Somali diaspora professionals. Somali ownership is key to the sustainability of the programme, as is close collaboration with Somali health ministries. The programme aims to develop a model for working collaboratively across regions and cultural barriers within fragile states, with the goal of creating hope and energy. It is based on the conviction that health research has a key role in rebuilding national health services and trusted institutions.
|
|
| 23. |
- Hameed, Zeeshan, et al.
(författare)
-
A Comprehensive Review on Thermal Coconversion of Biomass, Sludge, Coal, and Their Blends Using Thermogravimetric Analysis
- 2020
-
Ingår i: Journal of Chemistry. - : Hindawi Publishing Corporation. - 2090-9063 .- 2090-9071. ; 2020
-
Forskningsöversikt (refereegranskat)abstract
- Lignocellulosic biomass is a vital resource for providing clean future energy with a sustainable environment. Besides lignocellulosic residues, nonlignocellulosic residues such as sewage sludge from industrial and municipal wastes are gained much attention due to its large quantities and ability to produce cheap and clean energy to potentially replace fossil fuels. These cheap and abundantly resources can reduce global warming owing to their less polluting nature. The low-quality biomass and high ash content of sewage sludge-based thermal conversion processes face several disadvantages towards its commercialization. Therefore, it is necessary to utilize these residues in combination with coal for improvement in energy conversion processes. As per author information, no concrete study is available to discuss the synergy and decomposition mechanism of residues blending. The objective of this study is to present the state-of-the-art review based on the thermal coconversion of biomass/sewage sludge, coal/biomass, and coal/sewage sludge blends through thermogravimetric analysis (TGA) to explore the synergistic effects of the composition, thermal conversion, and blending for bioenergy production. This paper will also contribute to detailing the operating conditions (heating rate, temperature, and residence time) of copyrolysis and cocombustion processes, properties, and chemical composition that may affect these processes and will provide a basis to improve the yield of biofuels from biomass/sewage sludge, coal/sewage sludge, and coal/biomass blends in thermal coconversion through thermogravimetric technique. Furthermore, the influencing factors and the possible decomposition mechanism are elaborated and discussed in detail. This study will provide recent development and future prospects for cothermal conversion of biomass, sewage, coal, and their blends.
|
|
| 24. |
- Hasab, Hashim Ali, et al.
(författare)
-
Evaluation of Water Quality Parameters in Marshes Zone Southern of Iraq Based on Remote Sensing and GIS Techniques
- 2020
-
Ingår i: Water, Air and Soil Pollution. - Holland : Springer. - 0049-6979 .- 1573-2932. ; 231:4
-
Tidskriftsartikel (refereegranskat)abstract
- Al-Hawizeh Marsh is considered a major marsh in the south of Iraq with a longitude of 47° 32″–47° 45″ and latitude of 31° 30″–31° 42″, length of 80 km and width of 30 km, while the depth is from 1.5 to 4 m. It has a significant impact on the ecosystem and provides habitat for several types of living creatures. The surface water and the agricultural lands surrounding this marsh suffered from high level degrees of salinity. In the last decades, radical deterioration of water quality in this marsh happened because of the post-war-related events and several human activities. Landsat-8 data was used to predict and evaluate the spatial variation and map distributions of the salinity, SO4 and CaCO3 within Al-Hawizeh Marsh during the two seasons in the year 2017 based on the development of salinity and minerals mathematical equations. The evaluated values for salinity, SO4 and CaCO3 are found to be minimal in winter and maximum in autumn. The values of correlation coefficient (R2) between the real data and the equation results for the salinity, SO4 and CaCO3 during the two seasons are 0.95, 0.96 and 0.92, respectively.
|
|
| 25. |
- Hussain, Nadia, et al.
(författare)
-
Cichorium intybus L. significantly alleviates cigarette smoke-induced acute lung injury by lowering NF-κB pathway activation and inflammatory mediators
- 2023
-
Ingår i: Heliyon. - : Elsevier. - 2405-8440. ; 9:11
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Cigarette smoke (CS) is one of the primary causes of acute lung injury (ALI) via provoking pulmonary inflammation and oxidative stress. Despite substantial studies, no effective treatment for ALI is presently available.Purpose: New prospective treatment options for ALI are required. Thus, this project was designed to investigate the in vivo and in vitro protective effects of 70 % methanolic-aqueous crude extract of whole plant of Cichorium intybus (Ci.Mce) against CS-induced ALI.Study design: /methods: Initially, male Swiss albino mice were subjected to whole-body CS exposure for 10 continuous days to prepare CS-induced ALI models. Normal saline (10 mL/kg), Ci.Mce (100, 200, 300 mg/kg), and Dexamethasone (1 mg/kg) were orally administered to respective animal groups 1 h prior to CS-exposure. 24 hrs after the last CS-exposure, BALF and lungs were harvested to study the key characteristics of ALI. Next, HPLC analysis was done to explore the phytoconstituents.Results: Ci.Mce exhibited significant reductions in lung macrophage and neutrophil infiltration, lung weight coefficient, and albumin exudation. Additionally, it effectively ameliorated lung histopathological alterations and hypoxemia. Notably, Ci.Mce exerted inhibitory effects on the excessive generation of IL-6, IL-1β, and KC in both CS-induced ALI murine models and CSE-stimulated RAW 264.7 macrophages. Noteworthy benefits included the attenuation of oxidative stress induced by CS, evidenced by decreased levels of MDA, TOS, and MPO, alongside enhanced TAC production. Furthermore, Ci.Mce demonstrated a marked reduction in CS-induced NF-κB expression, both in vivo and in vitro.Conclusion: Consequently, Cichorium intybus could be a therapeutic option for CS-induced ALI due to its ability to suppress inflammatory reactions, mitigate oxidative stress, and quell NF-κB p65 activation.
|
|
| 26. |
- Khan, Muhammad Ahsan Iqbal, et al.
(författare)
-
An Experimental and Comparative Performance Evaluation of a Hybrid Photovoltaic-Thermoelectric System
- 2021
-
Ingår i: Frontiers in Energy Research. - : FRONTIERS MEDIA SA. - 2296-598X. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- The majority of incident solar irradiance causes thermalization in photovoltaic (PV) cells, attenuating their efficiency. In order to use solar energy on a large scale and reduce carbon emissions, their efficiency must be enhanced. Effective thermal management can be utilized to generate additional electrical power while simultaneously improving photovoltaic efficiency. In this work, an experimental model of a hybrid photovoltaic-thermoelectric generation (PV-TEG) system is developed. Ten bismuth telluride-based thermoelectric modules are attached to the rear side of a 10 W polycrystalline silicon-based photovoltaic module in order to recover and transform waste thermal energy to usable electrical energy, ultimately cooling the PV cells. The experiment was then carried out for 10 days in Lahore, Pakistan, on both a simple PV module and a hybrid PV-TEG system. The findings revealed that a hybrid system has boosted PV module output power and conversion efficiency. The operating temperature of the PV module in the hybrid system is reduced by 5.5%, from 55 degrees C to 52 degrees C. Due to a drop in temperature and the addition of some recovered energy by thermoelectric modules, the total output power and conversion efficiency of the system increased. The hybrid system's cumulative output power increased by 19% from 8.78 to 10.84 W, compared to the simple PV system. Also, the efficiency of the hybrid PV-TEG system increased from 11.6 to 14%, which is an increase of 17% overall. The results of this research could provide consideration for designing commercial hybrid PV-TEG systems.
|
|
| 27. |
- Mahar, Ihsan Ali, et al.
(författare)
-
Glucose sensing via green synthesis of NiO-SiO2 composites with citrus lemon peel extract
- 2024
-
Ingår i: Journal of materials science. Materials in electronics. - : SPRINGER. - 0957-4522 .- 1573-482X. ; 35:7
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, NiO-SiO2-based composites were synthesized through low-temperature aqueous chemical growth utilizing a facile, low-cost, and environmentally friendly approach. The composite systems were prepared using a combination of silica gel and citrus lemon peel extract. Due to the remarkable green chemicals in orange peel extract, porous nanostructures have been developed with thin sheet-like properties. The composite materials were examined in terms of their crystalline structure, morphology, optical band gap, and surface chemical composition. An advanced non-enzymatic glucose sensor developed from NiO-SiO2 composites exhibits rich surface oxygen vacancies and abundant catalytic sites. Based on sample 2, cyclic voltammetry revealed a linear glucose concentration range between 0.1 and 20 mM, chronoamperometry exhibited glucose concentration ranges between 0.1 and 14 mM, and linear sweep voltammetry revealed glucose concentration ranges from 0.1 to 10 mM. In enzymatic glucose sensors, the minimum level of detection was estimated to be 0.08 mM. A number of sensor characterization parameters were examined, including selectivity, stability, reproducibility, and real-time applications. In addition, electrochemical impedance spectroscopy (EIS) has shown that the NiO-SiO2 composite performs well in non-enzymatic glucose sensing due to its low charge transfer resistance and high electrochemical active surface area (ECSA). NiO-SiO2 composites could have significant biomedical, energy conversion, and storage applications based on the results obtained.
|
|
| 28. |
- Maliki, Ali A. A., et al.
(författare)
-
Estimation of Total Dissolved Solids in Water Bodies by Spectral Indices Case Study : Shatt al-Arab River
- 2020
-
Ingår i: Water, Air and Soil Pollution. - Germany : Springer. - 0049-6979 .- 1573-2932. ; 231:9
-
Tidskriftsartikel (refereegranskat)abstract
- In recent years, the problem of rising salinity levels in the Shatt al-Arab river in southern Iraq has been repeated, which has directly affected the living and health situation and the agricultural activity of these areas. Six sampling stations were selected along Shatt al-Arab to estimate the concentration of total dissolved solids (TDS) in the river; these stations included the following: Qurna, Labani, City Centre, Kateban, Corniche, and Sihan. In addition, three Landsat-8 satellite images which were taken at the same time as collected samples also used for detecting the salinity in the river. After processing of atmospheric correction and inserted remote sensing indices, the reflectance of water extracted from satellite images was used to express the spectral characteristics of different TDS concentrations. Correlation and regression were used to obtain accurate models for detecting the salinity depending on the spectral reflectance of Landsat 8 operational land image OLI. The results presented Pearson correlation (r) value of 0.70, 0.97, and 0.71, and correlation coefficient (R2) of 0.56, 0.94, and 0.85 between field data with spectral data of salinity index 2 (SI-2) derived from the green and blue bands of Landsat obtained in 2015, 2017, and 2018 respectively. In conclusion, remote sensing and GIS technologies coupled with spectral modeling are useful tools for providing a solution of future water resources planning and management, and also offer great undertaking as a means to improve knowledge of water quality and support water decision making.
|
|
| 29. |
|
|
| 30. |
|
|
| 31. |
|
|
| 32. |
- Shah, Aqeel Ahmed, et al.
(författare)
-
Facile synthesis of copper doped ZnO nanorods for the efficient photo degradation of methylene blue and methyl orange
- 2020
-
Ingår i: Ceramics International. - Oxford : Elsevier. - 0272-8842 .- 1873-3956. ; 46:8, part A, s. 9997-10005
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, zinc oxide (ZnO) nanorods are doped with copper by low temperature aqueous chemical growth method using different concentrations of copper 5 mg, 10 mg, 15 mg and 20 mg and labeled as sample 1, 2, 3 and 4 respectively. The morphology and phase purity of nanostructures was investigated by scanning electron microscopy, and powder X-ray diffraction techniques. The optical characterization was carried out through UV–Vis spectrophotometer. The band gap of coper doped ZnO has brought reduction at 250–600 nm and it indicates the fewer time for the recombination of electron and hole pairs, thus enhanced photo degradation efficiency is found. ZnO exhibits nanorods like shape even after the doping of copper. The photo degradation efficiency for the two chronic dyes such as methyl orange MO and methylene blue MB was found to be 57.5% and 60% respectively for a time of 180 mints. This study suggests that the copper impurity in ZnO can tailor its photocatalytic activity at considerable rate. The proposed photo catalysts are promising and can be used for the waste water treatment and other environmental applications. © 2019 Elsevier Ltd and Techna Group S.r.l.
|
|
| 33. |
- Shah, Aqeel Ahmed, et al.
(författare)
-
Tin as an Effective Doping Agent into ZnO for the Improved Photodegradation of Rhodamine B
- 2021
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2529-2537
-
Tidskriftsartikel (refereegranskat)abstract
- We have fabricated ZnO nano rods by hydrothermal method and successively doped them with tin (Sn) using different concentrations of 25, 50, 75 and 100 mg of tin chloride. XRD of the fabricated structures showed that ZnO possess hexagonal wurtzite phase. Scanning electron microscopy (SEM) was used to explore the morphology and it shows nanorod like morphology for all samples and no considerable change in the structural features were found. The dimension of nanorod is 200 to 300 nm. The doped materials were then investigated for their photo catalytic degradation of environmental pollutant Rhodamine B. The performance of doped ZnO is compared with the pristine ZnO. Scanning electron microscopy (SEM) was used to explore the morphology and it shows nanorod like morphology for all samples and no considerable change in the structural features were found. The dimension of nanorod is 200 to 300 nm. XRD of the fabricated structures showed that ZnO possess hexagonal wurtzite phase. Photo catalytic activity of rhodamine B was investigated under UV light and a maximum degradation efficiency of 85% was obtained. The optical property reveals the reduction in band gap of upto 17.14% for 100 mg Sn doped ZnO. The degradation is followed by the pseudo order kinetics. The produced results are unique in terms of facile synthesis of Sn doped ZnO and excellent photo degradation efficiency, therefore these materials can be used for other environmental applications.
|
|
| 34. |
- Ujan, Rabail, et al.
(författare)
-
Drug-1,3,4-Thiadiazole Conjugates as Novel Mixed-Type Inhibitors of Acetylcholinesterase : Synthesis, Molecular Docking, Pharmacokinetics, and ADMET Evaluation
- 2019
-
Ingår i: Molecules. - : MDPI. - 1431-5157 .- 1420-3049. ; 24:5
-
Tidskriftsartikel (refereegranskat)abstract
- A small library of new drug-1,3,4-thiazidazole hybrid compounds (3a-3i) was synthesized, characterized, and assessed for their acetyl cholinesterase enzyme (AChE) inhibitory and free radical scavenging activities. The newly synthesized derivatives showed promising activities against AChE, especially compound 3b (IC50 18.1 +/- 0.9 nM), which was the most promising molecule in the series, and was substantially more active than the reference drug (neostigmine methyl sulfate; IC50 2186.5 +/- 98.0 nM). Kinetic studies were performed to elucidate the mode of inhibition of the enzyme, and the compounds showed mixed-type mechanisms for inhibiting AChE. The Ki of 3b (0.0031 mu M) indicates that it can be very effective, even at low concentrations. Compounds 3a-3i all complied with Lipinski's Rule of Five, and showed high drug-likeness scores. The pharmacokinetic parameters revealed notable lead-like properties with insignificant liver and skin-penetrating effects. The structure-activity relationship (SAR) analysis indicated pi-pi interactions with key amino acid residues related to Tyr124, Trp286, and Tyr341.
|
|
| 35. |
- Ujan, Zaheer Ahmed, et al.
(författare)
-
The Crystal Disorder into ZnO with Addition of Bromine and Its Outperform Role in the Photodegradation of Methylene Blue
- 2022
-
Ingår i: Journal of cluster science. - : SPRINGER/PLENUM PUBLISHERS. - 1040-7278 .- 1572-8862. ; 33:1, s. 281-291
-
Tidskriftsartikel (refereegranskat)abstract
- In this research work, bromine (Br) is successfully doped into ZnO nanostructures using solvothermal method. The morphology, crystalline features, and composition of Br doped ZnO nanostructures were studied by scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive X ray spectroscopy (EDX) respectively. These newly prepared nanostructured materials were tested as photocatalysts for the photodegradation of methylene blue (MB) in aqueous solution under UV light. The kinetic rate constants were observed in the order (20% Br/ZnO > 15% Br/ZnO > 10% Br/ZnO > 5% Br/ZnO >pristine ZnO), thus they are indicating that the increasing Br dopant level has linear effect on the photodegradation of MB. The photocatalytic degradation efficiency of 60% was achieved for the pristine ZnO during the irradiation of UV light for 5 h, however 20% Br doped ZnO nanostructures has shown enhanced degradation efficiency of 97.63% during the irradiation of UV light for short interval of time of 2.2 h. The 20% Br/ZnO describes the highest rate constant value of (24.13 x 10(-3) min(-1)), for time period of 2.2 h and this values is about 8 and 4 times higher than the pristine ZnO (3.72 x 10(-3) min(-1)) and 5% Br/ZnO (6.13 x 10(-3) min(-1)), respectively. The obtained results of 20% Br doped ZnO sample are superior or equal in performance than the recently reported works. The catalytic mechanism is also proposed and it indicates the role of electrons coming from the bromine ion might act as radical for the degradation of MB. The present approach is simpler, environment friendly, scalable and could be of great consideration for the diverse energy and environment related applications. Graphic
|
|
| 36. |
|
|
| 37. |
- Abbasi, Mazhar Ali, et al.
(författare)
-
Decoration of ZnO nanorods with coral reefs like NiO nanostructures by the hydrothermal growth method and their luminescence study
- 2014
-
Ingår i: Materials. - : MDPI. - 1996-1944. ; 7:1, s. 430-440
-
Tidskriftsartikel (refereegranskat)abstract
- Composite nanostructures of coral reefs like p-type NiO on n-type ZnO nanorods have been decorate on fluorine-doped tin oxide glass substrates by the hydrothermal growth. Structural characterization was performed by field emission scanning electron microscopy, high-resolution transmission electron microscopy and X-ray diffraction techniques. This investigation has shown that the adopted synthesis has led to high crystalline quality nanostructures. Morphological study shows that the coral reefs like nanostructures are densely packed on the ZnO nanorods. Cathodoluminescence (CL) spectra for the synthesized composite nanostructures were dominated by a near band gap emission at 380 nm and by a broad interstitial defect related luminescence centered at ~630 nm. Spatially resolved CL images reveal that the luminescence originates mainly from the ZnO nanorods.
|
|
| 38. |
- Abbasi, Mazhar Ali, et al.
(författare)
-
Potentiometric Zinc Ion Sensor Based on Honeycomb-Like NiO Nanostructures
- 2012
-
Ingår i: Sensors. - : MDPI. - 1424-8220. ; 12:11, s. 15424-15437
-
Tidskriftsartikel (refereegranskat)abstract
- In this study honeycomb-like NiO nanostructures were grown on nickel foam by a simple hydrothermal growth method. The NiO nanostructures were characterized by field emission electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) techniques. The characterized NiO nanostructures were uniform, dense and polycrystalline in the crystal phase. In addition to this, the NiO nanostructures were used in the development of a zinc ion sensor electrode by functionalization with the highly selective zinc ion ionophore 12-crown-4. The developed zinc ion sensor electrode has shown a good linear potentiometric response for a wide range of zinc ion concentrations, ranging from 0.001 mM to 100 mM, with sensitivity of 36 mV/decade. The detection limit of the present zinc ion sensor was found to be 0.0005 mM and it also displays a fast response time of less than 10 s. The proposed zinc ion sensor electrode has also shown good reproducibility, repeatability, storage stability and selectivity. The zinc ion sensor based on the functionalized NiO nanostructures was also used as indicator electrode in potentiometric titrations and it has demonstrated an acceptable stoichiometric relationship for the determination of zinc ion in unknown samples. The NiO nanostructures-based zinc ion sensor has potential for analysing zinc ion in various industrial, clinical and other real samples.
|
|
| 39. |
- Abbasi, Mazhar Ali, et al.
(författare)
-
The fabrication of white light-emitting diodes using the n-ZnO/NiO/p-GaN heterojunction with enhanced luminescence
- 2013
-
Ingår i: Nanoscale Research Letters. - 1931-7573 .- 1556-276X. ; 8:320
-
Tidskriftsartikel (refereegranskat)abstract
- Cheap and efficient white light-emitting diodes (LEDs) are of great interest due to the energy crisis all over the world. Herein, we have developed heterojunction LEDs based on the well-aligned ZnO nanorods and nanotubes on the p-type GaN with the insertion of the NiO buffer layer that showed enhancement in the light emission. Scanning electron microscopy have well demonstrated the arrays of the ZnO nanorods and the proper etching into the nanotubes. X-ray diffraction study describes the wurtzite crystal structure array of ZnO nanorods with the involvement of GaN at the (002) peak. The cathodoluminescence spectra represent strong and broad visible emission peaks compared to the UV emission and a weak peak at 425 nm which is originated from GaN. Electroluminescence study has shown highly improved luminescence response for the LEDs fabricated with NiO buffer layer compared to that without NiO layer. Introducing a sandwich-thin layer of NiO between the n-type ZnO and the p-type GaN will possibly block the injection of electrons from the ZnO to the GaN. Moreover, the presence of NiO buffer layer might create the confinement effect.
|
|
| 40. |
- Abbasi, Rasha, et al.
(författare)
-
IceCube search for neutrinos from GRB 221009A
- 2023
-
Ingår i: Proceedings of 38th International Cosmic Ray Conference (ICRC 2023). - : Sissa Medialab Srl.
-
Konferensbidrag (refereegranskat)abstract
- GRB 221009A is the brightest Gamma Ray Burst (GRB) ever observed. The observed extremelyhigh flux of high and very-high-energy photons provide a unique opportunity to probe the predictedneutrino counterpart to the electromagnetic emission. We have used a variety of methods to searchfor neutrinos in coincidence with the GRB over several time windows during the precursor, promptand afterglow phases of the GRB. MeV scale neutrinos are studied using photo-multiplier ratescalers which are normally used to search for galactic core-collapse supernovae neutrinos. GeVneutrinos are searched starting with DeepCore triggers. These events don’t have directionallocalization, but instead can indicate an excess in the rate of events. 10 GeV - 1 TeV and >TeVneutrinos are searched using traditional neutrino point source methods which take into accountthe direction and time of events with DeepCore and the entire IceCube detector respectively. The>TeV results include both a fast-response analysis conducted by IceCube in real-time with timewindows of T0 − 1 to T0 + 2 hours and T0 ± 1 day around the time of GRB 221009A, as well asan offline analysis with 3 new time windows up to a time window of T0 − 1 to T0 + 14 days, thelongest time period we consider. The combination of observations by IceCube covers 9 ordersof magnitude in neutrino energy, from MeV to PeV, placing upper limits across the range forpredicted neutrino emission.
|
|
| 41. |
- Al-Ansari, Nadhir, 1947-, et al.
(författare)
-
Causes of Water Resources Scarcity in Iraq and Possible Solutions
- 2023
-
Ingår i: Engineering. - : Scientific Research Publishing. - 1947-3931 .- 1947-394X. ; 15:9, s. 467-496
-
Tidskriftsartikel (refereegranskat)abstract
- Iraq relies in its water resources on the waters of the Tigris and Euphrates and their tributaries. The country is located in the lower part of the catchment area of these rivers. The long-term average annual flow that enters Iraq from these rivers is about 30 BCM from the Euphrates, 21.2 BCM from the Tigris, 24.78 BCM from tributaries and 7 BCM from side valleys between Iraq and Iran. Now, the flow of these rivers is decreasing due to climate change and hydrological projects established in the upper parts of the catchment. It is indicated that precipitation will decrease by 15% - 25% during this century and that means that the flow of the Tigris and Euphrates rivers will be reduced by 29% - 73%. This will cause a grave depletion of groundwater resources. Türkiye is trying to finish building 22 dams and 19 hydropower stations. Iran built 12 dams and diverted the flow of some tributaries inside Iran and blocked all the valleys that contribute water from its land to Iraq. For these reasons, Iraq is experiencing shortages in its water resources and there is some sort of friction and conflict between riparian countries within the Tigris and Euphrates basins because each country tries to secure its water resources. In this research, the factors affecting the hydro politics within these basins are water scarcity, climate change and hydrological projects, population growth rate, energy issues, water mismanagement, economic changes, expansions of projects and technology, political issues, international water laws and public awareness. In case the situation remains as it is, Iraq will experience many problems in health, environment, economy, and security. To solve the problem of water scarcity in Iraq, two parallel lines of action are to be considered. These are: 1) Reach agreements with Riparian Parties; 2) Develop a long-term strategy that should take the following: a) Rehabilitating of existing dams, barrages & pump stations, b) Improving the efficiency of diversion and supply, c) Using of nonconventional water resources, d) Irrigation modernization using suitable techniques, e) Developing a public awareness program, f) Developing human resources program and establishing an agenda for training, g) Developing an agricultural plan that takes into consideration the possibility of reducing crops that consume a lot of water.
|
|
| 42. |
- Al-Madhlom, Qais, et al.
(författare)
-
Potential use of UTES in Babylon Governorate, Iraq
- 2020
-
Ingår i: Groundwater for Sustainable Development. - : Elsevier. - 2352-801X. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- There is a global attention that the future energy systems will be based on renewable energy like solar and wind. The large-scale utilization of renewables in space heating and cooling requires large Thermal Energy Storage TES to overcome the varying supply and demand. The process of producing the best Underground Thermal Energy Storage UTES system pass through two steps: first, finding the best type of UTES system, second, finding the best locations to install UTES system. Both of these two steps depend extremely on the site specific parameters such that the depth to the groundwater, transmissivity, type of soil, the depth to the bedrock, and seepage velocity. The purpose of this paper is to explain some of the site specific parameters that the type of UTES-system depends on and explain the suitable type of UTES systems. This study considers Babylon province (Iraq) as study area. This province has electricity deficiency due to Heating Ventilating and Air Conditioning HVAC applications. The methodology of this study includes reviewing the literature that consider the study area, and using Arc Map/GIS to visualize some of the in-site parameters. The results indicate that the best type of UTES system for the considered region is either aquifer or pit type, due to the type of the soil and the depth to the crystalline bedrock. The hydraulic conductivity and the seepage velocity in the considered region are (0.0023–2.5) m/d and (1.3 × 10−6 – 3.45 × 10−3) m/d respectively. These conditions satisfy the standards which regard aquifer type.
|
|
| 43. |
- Al Maliki, Ali A., et al.
(författare)
-
Assessment of the groundwater suitability for irrigation near Al Kufa City and preparing the final water quality maps using spatial distribution tools
- 2020
-
Ingår i: Environmental Earth Sciences. - Germany : Springer. - 1866-6280 .- 1866-6299. ; 79:13, s. 1-12
-
Tidskriftsartikel (refereegranskat)abstract
- In many parts of the world, groundwater quality is decreasing due to urbanization industrialization and use of agricultures in rural areas. This subject has formed an urgent need to determine the suitability of groundwater for various purposes. The aim of this study is to determine a groundwater index for groundwater use for irrigation in agriculture. The study is carried out in an agricultural area; near Al Kufa city, North of Al Najaf province, Iraq. Many chemical variables are used in this model, including (total dissolved solids TDS, electrical conductivity EC, sodium Na, potassium K and iron Fe), in addition to some of the heavy metals (cadmium Cd, lead Pb, chromium Cr, and nickel Ni), that also added to the index. The weight’s parameters are determined using analytical hierarchy process (AHP) and classified into five groups based on the human health significance of these parameters and negative effect on agriculture. The result of this study indicates that the water quality index (WQI) records values between (0 and 4.33), and in which the value of (2.16) represents the limit between unpolluted and polluted groundwater. This study confirms that all groundwater samples over the study area are suitable for agriculture. The final WQI values are exported to ArcMap environment to prepare the final WQI maps of study area.
|
|
| 44. |
- Al Maliki, Ali, et al.
(författare)
-
Chemometric Methods to Predict of Pb in Urban Soil from Port Pirie, South Australia, using Spectrally Active of Soil Carbon
- 2018
-
Ingår i: Communications in Soil Science and Plant Analysis. - : Taylor & Francis. - 0010-3624 .- 1532-2416. ; 49:11, s. 1370-1383
-
Tidskriftsartikel (refereegranskat)abstract
- A total of 73 soil samples were initially analyzed for lead (Pb) concentration as an indicator of the environment impact of smelter activity in the Port Pirie, South Australia. Chemometric techniques were used to assess the ability of near-infrared (NIR) reflectance spectroscopy to predict soil Pb using spectrally active soil characteristics such as soil carbon (C). The result indicated a strong linear relationship between log-transformed data of soil Pb and spectral reflectance in the range between 500 and 612 nm with R2 = 0.54 and a low root-mean-square error (RMSEv = 0.38) for the validation mode with an acceptable ratio of performance to deviation and ratio of error range (1.6 and 7.7, respectively). This study suggested that NIR spectroscopy based on auxiliary spectrally active components is a rapid and noninvasive assessment technique and has the ability to determine Pb contamination in urban soil to be useful in environmental health risk assessment.
|
|
| 45. |
- Al-Maliki, Laheab A. Jasem, et al.
(författare)
-
Bearing Capacity Map for An-Najaf and Kufa Cities Using GIS
- 2018
-
Ingår i: Engineering. - : Scientific Research Publishing. - 1947-3931 .- 1947-394X. ; 10:5, s. 262-269
-
Tidskriftsartikel (refereegranskat)abstract
- An-Najaf province is situated in south-western part of Iraq. It is 70 meters above the sea level in the dry desert environment. The city is considered as one of the most important cities in Iraq, facing a fast population growth and continuous development in constructions such as residential complexes, hotels, bridges and shopping malls. Soil investigation data for An-Najaf Province (An-Najaf and Kufa cities) from 464 boreholes drilled by the National Centre for Construction Laboratories & Researches (NCCLR)/Babylon laboratory were used in this research. The data were analysed and possessed using Excel program then represented on the Geographical Information System (GIS) program by Inverse Distance Weighted (IDW) tool to create an allowable bearing capacity map for the soil at depths 0 - 2 meters. The allowable bearing capacity is one of the most important soil characteristics to be considered when making a database for An-Najaf city soil. Geographical Information System GIS program enables to create reliable database for any characteristic and it is one of the best programs to produce an accurate map and allow ease in dealing with it. Those maps cover all the studied areas and by using contour lines, approximate values for no-data areas can be obtained. The results show that the allowable bearing capacity range is 5 - 20 Ton/m2 for both An-Najaf and Kufa cities. Kufa city has the range 5 - 9 Ton/m2. An-Najaf city has the range 7 - 18 at the center, 8 - 10 Ton/m2 at the north eastern part, 7 - 14 Ton/m2 for the north western part, 6 - 12 Ton/m2 at the south eastern and 12 - 19 Ton/m2 at the south western.
|
|
| 46. |
- Al-Mamoori, Sohaib Kareem, et al.
(författare)
-
Chloride, Calcium Carbonate and Total Soluble Salts Contents Distribution for An-Najaf and Al-Kufa Cities’ Soil by Using GIS
- 2019
-
Ingår i: Geotechnical and Geological Engineering. - : Springer. - 0960-3182 .- 1573-1529. ; 37:3, s. 2207-2225
-
Tidskriftsartikel (refereegranskat)abstract
- The main objective of the paper is to create geotechnical maps for three soil chemical properties in An-Najaf and Kufa cities’ soil by utilizing of GIS tools. This properties are the chloride concentration, calcium carbonate (CaCO 3) and total soluble salts where they affect the durability of reinforced structural elements. This paper provides an easy accurate way to represent soil properties levels for different depths of soil and create reliable database that will help engineers and decision makers. The data included in this paper were collected for (464) boreholes with depths up to 35 m distributed on residential areas in all of An-Najaf and Kufa cities. Arc-Map of GIS 10.2.1 was used to produce the maps. It has been concluded that chloride content in the soil of the study area range from - 0.01 to 0.99% and with an average of 0.5. The maximum value found in at depth 4–6 m while the minimum value found in location at depth 4–6, 8–10 and 14–16 m. The chloride content in most of An-Najaf province has exceeded the permissible limit and for all, this required taking percussions to protect foundations. While calcium carbonate content in the soil of the study area range from 53 to 0.18 and with an average of 26.6. The maximum and the minimum values found at depth 4–6 m. Calcium carbonate content is within the permissible limits in most locations except in some locations.
|
|
| 47. |
- Ali, Nadeem, et al.
(författare)
-
Semi-Volatile Organic Compounds in Car Dust : A Pilot Study in Jeddah, Saudi Arabia
- 2021
-
Ingår i: International Journal of Environmental Research and Public Health. - : MDPI AG. - 1661-7827 .- 1660-4601. ; 18:9
-
Tidskriftsartikel (refereegranskat)abstract
- People may spend a significant amount of their daily time in cars and thus be exposed to chemicals present in car dust. Various chemicals are emitted from during car use, contaminating the car dust. In this study, we compiled published and unpublished data on the occurrence of phthalates, flame retardants (FRs), polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) in Saudi car dust. Phthalates, a class of chemical commonly used as plasticizers in different car parts, were the major pollutants found in car dust, with a median value of n-ary sumation phthalates 1,279,000 ng/g. Among other chemicals, organophosphate flame retardants (OPFRs) were found to be between 1500-90,500 ng/g, which indicates their use as alternative FRs in the car industry. The daily exposure to Saudi drivers (regular and taxi drivers) was below the respective reference dose (RfD) values of the individual chemicals. However, the estimated incremental lifetime cancer risk (ILCR) values due to chronic exposure to these chemicals was >1 x 10(-5) for taxi drivers for phthalates and PAHs, indicating that the long-term exposure to these chemicals is a cause of concern for drivers who spend considerable time in cars. The study has some limitations, due to the small number of samples, lack of updated RfD values, and missing cancer slope factors for many studied chemicals. Despite these limitations, this study indicates the possible range of exposure to drivers from chemicals in car dust and warrants further extensive studies to confirm these patterns.
|
|
| 48. |
- Ali Soomro, Razium, et al.
(författare)
-
A highly selective and sensitive electrochemical determination of melamine based on succinic acid functionalized copper oxide nanostructures
- 2015
-
Ingår i: RSC Advances. - : ROYAL SOC CHEMISTRY. - 2046-2069. ; 5:127, s. 105090-105097
-
Tidskriftsartikel (refereegranskat)abstract
- This study presents the development of a highly selective and sensitive electrochemical sensor for the determination of melamine from aqueous environments. The sensor system is based on functionalised marigold-like CuO nanostructures fabricated using a controlled hydrothermal process, where the utilised succinic acid is considered to play a dual role as a functionalising and growth controlling agent (modifier). The fabricated nanostructures exhibit sharp and well-ordered structural features with dimensions (thickness) in the range of 10-50 nm. The sensor system exhibits strong linearity within the concentration range of 0.1 x 10(-9) to 5.6 x 10(-9) M and demonstrates an excellent limit of detection up to 0.1 x 10(-10) M. The extreme selectivity and sensing capability of the developed sensor is attributed to the synergy of selective interaction between succinic acid and melamine moieties, and the high surface area of marigold-like CuO nanostructures. In addition to this, the developed sensor was also utilised for the determination of melamine from real milk samples collected from different regions of Hyderabad, Pakistan. The obtained excellent recoveries proved the feasibility of the sensor for real life applications. The sensor system offers an operative measure for detecting extremely low melamine content with high selectivity in food contents.
|
|
| 49. |
- Ali Soomro, Razium, et al.
(författare)
-
Amino acid assisted growth of CuO nanostructures and their potential application in electrochemical sensing of organophosphate pesticide
- 2016
-
Ingår i: Electrochimica Acta. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0013-4686 .- 1873-3859. ; 190, s. 972-979
-
Tidskriftsartikel (refereegranskat)abstract
- This work reports a highly sensitive electrochemical sensor for organophosphate pesticide (malathion) based on unique and attractive CuO nanostructures. The discussed nanostructures were synthesized using low temperature hydrothermal growth method utilizing green amino acids such as glycine, serine, threonine and histidine as effective bio-compatible templates. The morphological evaluation demonstrated formation of unique and attractive 1-D nanostructures reflecting the effective growth controlling and directing capabilities of the utilized amino acids. The as-synthesized CuO nanostructures were noted to possess high affinity towards malathion which enabled their application as electrode material for the development of affinity based electrochemical sensor. Although, the as-synthesized morphologies were all sensitive towards malathion but the glycine directed triangular flake-like nanostructures exhibited greater sensitivity compared to other competitors. The electrochemical behaviour of the modified electrodes was studied using cyclic voltammetry (CV) whereas, differential pulse voltammetry (DPV) was utilized for the analytical evaluation of the sensor. The developed sensor demonstrated high reproducibility, stability, wide detection window (1-12 nM), and sensitivity to detect malathion up to 0.1 nM based on suppressive signal measurement. In addition, the sensor system exhibited high anti-interference capability in the presence of common co-existing pesticides like lindane, carbendazim, and trichlorfon. The developed sensor provides an effective measure for detecting extremely low concentration of malathion with wide applicability in various fields. (C) 2015 Elsevier Ltd. All rights reserved.
|
|
| 50. |
- Ali Soomro, Razium, et al.
(författare)
-
Development of sensitive non-enzymatic glucose sensor using complex nanostructures of cobalt oxide
- 2015
-
Ingår i: Materials Science in Semiconductor Processing. - : Elsevier. - 1369-8001 .- 1873-4081. ; 34, s. 373-381
-
Tidskriftsartikel (refereegranskat)abstract
- The study reports the synthesis of cobalt oxide (Co3O4) nanostructures and their application in enzyme free electrochemical sensing of glucose. The synthesized nanostructures were elaborately characterized via number of analytical techniques including scanning electron microscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). The as-synthesized nanostructures of Co3O4 were found to exhibited nanodisc like morphology with the size dimension in range of 300-500 nm. The obtained morphological features were evaluated for their electrochemical potential towards oxidation of glucose which enabled development of sensitive (27.33 mu A mM(-1) cm(-2)), and stable enzyme free glucose sensor. In addition, the developed sensor showed excellent linearity (r(2)=0.9995), wide detection range (0.5-5.0 mM), lower detection limit (0.8 mu M) and extreme selectivity towards glucose in the presence of common interferents like dopamine (DP), ascorbic acid (AA) and uric acid (UA). The successfully application of developed sensor for real blood glucose analysis further reflects its capability for routine glucose measurement.
|
|
