| 1. |
- Atakan, Aylin, et al.
(författare)
-
Impact of the morphological and chemical properties of copper-zirconium-SBA-15 catalysts on the conversion and selectivity in carbon dioxide hydrogenation
- 2019
-
Ingår i: Journal of Colloid and Interface Science. - : ACADEMIC PRESS INC ELSEVIER SCIENCE. - 0021-9797 .- 1095-7103. ; 546, s. 163-173
-
Tidskriftsartikel (refereegranskat)abstract
- A hybrid catalyst consisting of Zr-doped mesoporous silica (Zr-SBA-15) supports with intergrown Cu nanoparticles was used to study the effects of a catalysts chemical states on CO2 hydrogenation. The chemical state of the catalyst was altered by using tetraethyl orthosilicate (TEOS) or sodium metasilicate (SMS) as the silica precursor in the synthesis of the Zr-SBA-15 framework, and infiltration (Inf) or evaporation induced wetness impregnation (EIWI) as the Cu loading method. As a result, the silica precursor mainly affects the activity of the catalyst whereas the Cu loading method alters the selectivity of the products. TEOS materials exhibit a higher catalytic activity compared to SMS materials due to different Zr dispersion and bonding to the silica matrix. EIWI catalysts display selectivity for methanol formation, while the Inf ones enable methanol conversion to DME. This is correlated to a higher Zr content and lower Cu oxidation states of EIWI prepared catalysts. (C) 2019 Elsevier Inc. All rights reserved.
|
|
| 2. |
- Atakan, Aylin, 1984-
(författare)
-
Mesoporous material systems for catalysis and drug delivery
- 2018
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Hybrid material systems possess multi-functional properties which make them intriguing for the materials science community since very early dates. However, it is not straightforward to produce such material systems. A smart and efficient approach is necessary to extract the desired properties of each component under the desired conditions. This study evolved to its last form primarily around this notion, where the development of a hybrid material is the core of the work. This hybrid material is then further explored for two different applications in the catalysis and drug delivery fields.A nanoassembly was established around a mesoporous silica support. SBA-15 was picked as this support among the other mesoporous silica due to its well-defined pore structure and accessible pore volume. The silica framework was doped with Zr atoms and the pores were partly infiltrated with Cu nanoparticles resulting in a hybrid material with tunable properties. SBA-15 was synthesized by a sol-gel method where a micellar solution was employed as a template for the silica framework. To achieve the doped version, a Zr precursor was added to the synthesis solution. The effects of different synthesis conditions, such as the synthesis catalyst (F-or a Cl-salt) and the Si source (tetraethyl orthosilicate (TEOS) or sodium metasilicate (SMS)) on the characteristics of the final material were investigated. It was observed that these changes in the synthesis conditions yielded different particle morphology, pore size (11-15 nm), and specific surface area (400-700 m2/g). Cu nanoparticles (NPs) were grown in the (Zr-)SBA-15 support using infiltration (Inf) or evaporation induced wetness impregnation (EIWI) methods. The infiltration method is based on functionalizing the (Zr-)SBA-15 support surfaces before the Cu ion attachment whereas EIWI is based on slow evaporation of the liquid from the (Zr-)SBA-15 - Cu aqueous suspension. Both methods are designed to yield preferential growth of Cu NPs in the pores with a diameter smaller than 10 nm and in oxidized form. However, depending on the loading method used, different chemical states of the final material were achieved, i.e. Zr content and porous network properties are different. Cu-Zr-SBA-15 nanoassemblies produced under various synthesis conditions were used for the catalytic conversion of CO2into valuable fuels such as methanol and dimethyl ether (DME). The effect of different chemical states of the catalyst arising from variations in the synthesis parameters was investigated. It was found that the Si precursor (TEOS or SMS) had a considerable impact on the overall performance of the catalyst whereas the Cu loading method (Inf or EIWI) changed the catalytic selectivity between DME and methanol. The activity of the catalyst was further investigated in a time-evolution study where the accumulation of each product in the gas phase and the molecular groups attached to the catalyst surface were recorded over time. Accordingly, thermodynamic equilibrium was achieved on the 14th day of the reaction under 250°C and 33 bar. The resulting total CO2conversion was 24%, which is the thermodynamically highest possible conversion, according to theoretical calculations. It was also concluded from the experimental results that, DME is formed by a combination of two methoxy surface groups. Additionally, the formation of DME boosts the total CO2conversion to fuels, which otherwise is limited to 9.5%.The design of Cu-Zr-SBA-15 was also investigated for drug delivery applications, due to its potential as a biomaterial, e.g., a filler in dental composites, and the antibacterial properties of Cu. Also, the bioactivity of SiO2and ZrO2was considered to be an advantage. With this aim, Cu infiltrated Zr doped SBA-15 material was prepared by using TEOS as the silica precursor and the Inf-method to grow Cu NPs. The performance of the final material as a drug delivery vehicle was tested by an in-vitro delivery study with chlorhexidine digluconate.The nanoassemblies show a drug loading capacity of 25-40% [mg drug / mg (drug+carrier)]. The drug release was determined to be composed of two steps. First, a burst release of the drug molecules that are loosely held in the voids of the mesoporous carrier followed by the diffusion of the drug molecules that are attached to the carrier surface. The presence of Zr and Cu limits the burst release and beneficially slows down the drug release process. The effect of pore properties of SBA-15 was explored in a study where the antibiotic doxycycline hyclate was loaded in SBA-15 materials with different pore sizes. It was observed that the pore size is directly proportional to the drug loading capacity [mg drug / mg (drug+carrier)] and the released drug percentage (the released drug amount/total amount of loaded drug). The drug release was fast due to its weak interactions with the SBA-15 materials. In summary, this work demonstrates the multifunctional character of a smart-tailored nanoassembly which gives valuable insights for two distinct applications in catalysis and drug delivery.
|
|
| 3. |
- Atakan, Aylin, et al.
(författare)
-
Synthesis of a Cu-infiltrated Zr-doped SBA-15 catalyst for CO2 hydrogenation into methanol and dimethyl ethert
- 2017
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : ROYAL SOC CHEMISTRY. - 1463-9076 .- 1463-9084. ; 19:29, s. 19139-19149
-
Tidskriftsartikel (refereegranskat)abstract
- A catalytically active nanoassembly comprising Cu-nanoparticles grown on integrated and active supports (large pore Zr-doped mesoporous SBA-15 silica) has been synthesized and used to promote CO2 hydrogenation. The doped mesoporous material was synthesized using a sal-gel method, in which the pore size was tuned between 11 and 15 nm while maintaining a specific surface area of about 700 m(2) g (1). The subsequent Cu nanoparticle growth was achieved by an infiltration process involving attachment of different functional groups on the external and internal surfaces of the mesoporous structure such that 7-10 nm sized Cu nanoparticles grew preferentially inside the pores. Chemisorption showed improved absorption of both CO2 and H-2 for the assembly compared to pure SBA-15 and 15% of the total CO2 was converted to methanol and dimethyl ether at 250 degrees C and 33 bar.
|
|
| 4. |
- Atakan, Aylin, et al.
(författare)
-
Time evolution of the CO2 hydrogenation to fuels over Cu-Zr-SBA-15 catalysts
- 2018
-
Ingår i: Journal of Catalysis. - : Elsevier BV. - 0021-9517 .- 1090-2694. ; 362, s. 55-64
-
Tidskriftsartikel (refereegranskat)abstract
- Time evolution of catalytic CO2 hydrogenation to methanol and dimethyl ether (DME) has been investigated in a high-temperature high-pressure reaction chamber where products accumulate over time. The employed catalysts are based on a nano-assembly composed of Cu nanoparticles infiltrated into a Zr doped SiOx mesoporous framework (SBA-15): Cu-Zr-SBA-15. The CO2 conversion was recorded as a function of time by gas chromatography-mass spectrometry (GC-MS) and the molecular activity on the catalyst’s surface was examined by diffuse reflectance in-situ Fourier transform infrared spectroscopy (DRIFTS). The experimental results showed that after 14 days a CO2 conversion of 25% to methanol and DME was reached when a DME selective catalyst was used which was also illustrated by thermodynamic equilibrium calculations. With higher Zr content in the catalyst, greater selectivity for methanol and a total 9.5% conversion to methanol and DME was observed, yielding also CO as an additional product. The time evolution profiles indicated that DME is formed directly from methoxy groups in this reaction system. Both DME and methanol selective systems show the thermodynamically highest possible conversion.
|
|
| 5. |
- Björk, Emma, et al.
(författare)
-
A shelf-life study of silica- and carbon-based mesoporous materials
- 2021
-
Ingår i: Journal of Industrial and Engineering Chemistry. - : Elsevier Science INC. - 1226-086X .- 1876-794X. ; 101, s. 205-213
-
Tidskriftsartikel (refereegranskat)abstract
- Mesoporous silica- and carbon-based materials, including bioactive glasses, have proven potential as components of medical devices and as drug carriers. From an application perspective, knowledge about the shelf-life stability of these materials under various conditions is vital. Here, mesoporous bioactive glasses (MBGs) synthesized by aerosol-assisted spray-drying and by a batch sol-gel method, mesoporous silicas of SBA-15 type, and mesoporous carbons CMK-1 and CMK-3 have been stored under varying conditions, e.g. at different temperature and relative humidity (RH), and in different storage vessels. The results show that the silica-based materials stored in Eppendorfs are sensitive to humidity. Spray dried MBGs decompose within 1 month at a RH >5%, whilst sol-gel MBGs are more stable up to a RH >60%. Changing the storage vessel to sealed glass flasks increases the MBGs lifetime significantly, with no degradation during 2 months of storage at a RH = 75%. SBA-15 stored in Eppendorfs are more stable compared to MBGs, and addition of F- ions added during the synthesis affects the material degradation rate. Mesoporous carbons are stable under all conditions for all time points. This systematic study clearly demonstrates the importance of storage conditions for mesoporous materials which is crucial knowledge for commercialization of these materials. (C) 2021 The Author(s). Published by Elsevier B.V. on behalf of The Korean Society of Industrial and Engineering Chemistry.
|
|
| 6. |
- Björk, Emma, et al.
(författare)
-
Formation of block-copolymer-templated mesoporous silica
- 2018
-
Ingår i: Journal of Colloid and Interface Science. - : ACADEMIC PRESS INC ELSEVIER SCIENCE. - 0021-9797 .- 1095-7103. ; 521, s. 183-189
-
Tidskriftsartikel (refereegranskat)abstract
- In situ attenuated total reflectance Fourier transform infrared spectroscopy is used to monitor the chemical evolution of the mesoporous silica SBA-15 from hydrolysis of the silica precursor to final silica condensation after the particle formation. Two silica precursors, tetraethyl orthosilicate (TEOS) or sodium metasilicate (SMS) were used, and the effects of additive (heptane and NH4F) concentrations were studied. Five formation stages are identified when TEOS is used as the precursor. The fourth stage correlates with the appearance and evolution of diffraction peaks recorded using in situ small angle X-ray diffraction. Details of the formed silica matrix are observed, e.g. the ratio between six-fold cyclic silica rings and linear bonding increases with the NH4F concentration. The TEOS hydrolysis time is independent of the NH4F concentration for small amounts of heptane, but is affected by the size of the emulsion droplets when the heptane amount increases. Polymerization and condensation rates of both silica precursors are affected by the salt concentration. Materials synthesized using SMS form significantly faster compared to TEOS-materials due to the pre-hydrolysis of the precursor. The study provides detailed insights into how the composition of the synthesis solution affects the chemical evolution and micellar aggregation during formation of mesoporous silica. (C) 2018 Elsevier Inc. All rights reserved.
|
|
