| 1. |
- Augustin, Tim, et al.
(författare)
-
Advanced Test Circuit for DC Circuit Breakers
- 2018
-
Ingår i: 20th European Conference on Power Electronics and Applications (EPE'18 ECCE EUROPE).
-
Konferensbidrag (refereegranskat)abstract
- In future HVDC systems, many DC circuit breakers (DCCBs) will be required. In this paper, an advanced test circuit for DCCBs is described. A DC source is combined with a capacitor bank. In contrast to other test circuits, the proposed test circuit allows to replicate constant DC and temporary faults. In addition to conventional faults, this enables testing of auto-reclosing, proactive commutation, and complex test sequences combining all of these modes. The test circuit is easy to setup and also suitable for smaller research facilities. Experimental results from a down-scaled mock-up are included to demonstrate the capabilities of the test circuit.
|
|
| 2. |
- Augustin, Tim, et al.
(författare)
-
Enhanced Active Resonant DC Circuit Breakers Based on Discharge Closing Switches
- 2021
-
Ingår i: IEEE Transactions on Power Delivery. - : IEEE. - 0885-8977 .- 1937-4208. ; 36:3, s. 1735-1743
-
Tidskriftsartikel (refereegranskat)abstract
- Direct current circuit breakers (DCCBs) have become a large research topic and are considered one of the critical components for future DC grids. Proposed DCCB concepts may be grouped into hybrid DCCBs and active resonant DCCBs. In this work, the enhanced active resonant (EAR) DCCB family is introduced. EAR DCCBs combine elements of hybrid and active resonant DCCBs. The EAR DCCB family consists of one unidirectional and six bidirectional concepts. All concepts feature proactive commutation. The main characteristic of the EAR DCCBs is that discharge closing switches are used instead of semiconductors with turn-off capability. Relevant discharge closing switch technology is reviewed, a laboratory prototype is explained, and experimental results are presented to demonstrate the feasibility of the proposed DCCB concepts.
|
|
| 3. |
- Augustin, Tim, 1990-
(författare)
-
Enhanced Active Resonant DC Circuit Breakers for HVDC Grids
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- High-voltage DC (HVDC) grids are considered promising for the electricity grid expansion required to integrate renewable energy sources into the existing infrastructure. DC fault currents increase rapidly and lack a current zero crossing. Therefore, HVDC grids require complex DC circuit breakers (DCCBs) capable of interrupting faster than AC circuit breakers to protect against DC faults. Being complex, DCCBs can offer functionality in addition to interruption. Most DCCBs can be categorized as current-injection DCCBs or hybrid DCCBs. Hybrid DCCBs feature more functionality than current-injection DCCBs. Nevertheless, the power semiconductors used in hybrid DCCBs are expensive. The enhanced active resonant (EAR) DCCBs studied in this work are an intermediate solution with the functionality of hybrid DCCBs and the interruption mechanism of current-injection DCCBs. The core of EAR DCCBs are discharge closing switches, which are simple, robust and available for high current and high voltage.Like all HVDC DCCBs, EAR DCCBs need a fast mechanical switch. A Thomson-coil actuator with active damping is used to open and close the mechanical switch fast. A novel Thomson-coil driver recycling energy during actuation simplifies the Thomson-coil actuator system. Experimental results demonstrate the open-close and open-close-open operation of the Thomson-coil actuator. Extensive experimental studies investigate the DC interruption capability and functionality of a prototype EAR DCCB in a specialized DCCB test circuit. The tests results show that the prototype EAR DCCB can interrupt up to 1.2 kA, abort proactive commutation, and auto-reclose. The studies of the discharge closing switch used find that its minimum voltage is not a serious limitation and that the discharge can become unstable after commutationat low currents. An alternative commutation technique allows EAR DCCBs with less components to operate reliably at all currents.
|
|
| 4. |
- Augustin, Tim, et al.
(författare)
-
Experimental Study of Enhanced Active Resonant DC Circuit Breakers
- 2022
-
Ingår i: IEEE transactions on power electronics. - : Institute of Electrical and Electronics Engineers (IEEE). - 0885-8993 .- 1941-0107. ; 37:5, s. 5687-5698
-
Tidskriftsartikel (refereegranskat)abstract
- Enhanced active resonant (EAR) dc circuit breakers (DCCBs) are a novel type of DCCB that use a discharge closing switch as interruption medium. A technical limitation of discharge closing switches is the minimum voltage across the main gap required for successful triggering. A novel commutation process creating the minimum voltage internally is proposed, which allows to simplify the EAR DCCB configuration and to reduce its component count. In the prototype, the discharge closing switch is implemented with a TVG. Experiments show that the TVG can be triggered reliably down to a voltage of 50 V and that the discharge in the TVG is highly oscillatory at low current. The originally proposed EAR DCCB configuration has to be tuned such that the commutation to the TVG succeeds at low current. Conversely, the novel commutation process decouples the minimum voltage from the current level by adjusting the triggering delay. This allows reliable commutation irrespective of the operating conditions. It is shown that the novel commutation process does not adversely affect dc interruption. Proactive commutation operation and auto-reclosing strategies are demonstrated.
|
|
| 5. |
- Augustin, Tim, et al.
(författare)
-
Modelling of HVDC breakers for HVDC grid simulations
- 2017
-
Ingår i: IET Conference Publications. - : Institution of Engineering and Technology.
-
Konferensbidrag (refereegranskat)abstract
- This paper deals with the modelling of high-voltage direct current (HVDC) breakers in PSCAD. The models are aimed at HVDC grid simulation and are kept as simple as possible. An overview is given over recently proposed HVDC breaker concepts. Assumptions and simplifications are explained as well. The main result is that even these simplified models are too detailed for grid simulations. The reason for this is that from a grid perpective the only thing that matters is when the metal-oxide varistor is inserted. The models can be used to estimate interruption times.
|
|
| 6. |
- Augustin, Tim, et al.
(författare)
-
System Design of Fast Actuator for Vacuum Interrupter in DC Applications
- 2018
-
Ingår i: 2018 28th International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV). - : Institute of Electrical and Electronics Engineers (IEEE). - 9781538643730 ; , s. 527-530
-
Konferensbidrag (refereegranskat)abstract
- One of the major challenges of DC circuit breakers is the required fast mechanical actuator. In this paper, a Thomson coil actuator system for a vacuum interrupter is designed. Active damping is used to decelerate the moving contacts. Challenges are discussed, especially concerning the power supply needed for the Thomson coil actuator. The design philosophy is explained and FEM simulation results are presented. The results indicate that a wide range of combinations of drive circuit capacitance and voltage fulfill the requirements for armature acceleration. However, active damping requires a very careful selection of drive circuit voltage and timing of applied damping.
|
|
| 7. |
- Augustin, Tim, et al.
(författare)
-
Thomson-Coil Actuator System for Enhanced Active Resonant DC Circuit Breakers
- 2022
-
Ingår i: IEEE Journal of Emerging and Selected Topics in Power Electronics. - : Institute of Electrical and Electronics Engineers (IEEE). - 2168-6777 .- 2168-6785. ; 10:1, s. 800-810
-
Tidskriftsartikel (refereegranskat)abstract
- Enhanced active resonant (EAR) dc circuit breakers (DCCBs) are a promising set of recently proposed DCCB concepts. As other DCCBs, EAR DCCBs still require a fast mechanical switch. The requirements on the actuator of the mechanical switch depend on the DCCB concept and the dc grid and are derived here for an EAR DCCB. Thomson-coil actuators (TCAs) can open and close mechanical switches sufficiently fast to satisfy the requirements. This work studies experimentally a TCA system with active damping for an off-the-shelf industrial vacuum interrupter used as mechanical switch in an EAR DCCB. The prototype is explained in detail, and extensive measurement results are presented, showing that active damping must be perfectly timed to be effective. A novel Thomson-coil (TC) driver is proposed and studied experimentally, which operates the TCA more efficiently by recycling energy during the actuation. Moreover, the novel TC driver reduces the capacitive storage by 50% and allows for faster recharging with lower charging current. Finally, the autoreclosing and proactive commutation operation of the TCA system and the interruption capability of the prototype EAR DCCB are demonstrated experimentally.
|
|
| 8. |
- Augustin, Tim, et al.
(författare)
-
Transient Behaviour of VSC-HVDC Links with DC Breakers Under Faults
- 2017
-
Ingår i: 2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE EUROPE). - : Institute of Electrical and Electronics Engineers (IEEE). - 9789075815276
-
Konferensbidrag (refereegranskat)abstract
- In future high-voltage direct current (HVDC) systems, a large number of HVDC breakers will be required.In this paper, the influence of HVDC breakers on the transient performance of point-to-point HVDC links in both asymmetrical and symmetrical monopolar configuration with half-bridge modular multilevel converters is studied with simulations in PSCAD. As HVDC breakers, the active resonant breaker and ABB’s hybrid breaker are considered. The analyzed scenarios include DC line faults, DC bus faults, and AC faults between the converter and the transformer. The highest DC breaking capability is required during DC line faults in the asymmetric and symmetric monopole. The converter stress is highest for DC bus faults and unbalanced converter AC faults in the asymmetric monopole and for DC bus pole-to-pole faults in the symmetric monopole. During DC pole-to-ground faults in the symmetric monopole, the HVDC breaker combined with DC side arrestors yields the lowest overvoltage stress on the cable of the healthy pole. The fault current shapes depend strongly on the interaction of the converter and the travelling waves on the lines, and differ from the fault current shapes in typical HVDC breaker test circuits. Furthermore, the active resonant breaker and the ABB hybrid breaker perform similarly in the used benchmarks due to the very fast DC line fault detection.
|
|
| 9. |
- Breeur, Marie, et al.
(författare)
-
Pan-cancer analysis of pre-diagnostic blood metabolite concentrations in the European Prospective Investigation into Cancer and Nutrition
- 2022
-
Ingår i: BMC Medicine. - : BioMed Central (BMC). - 1741-7015. ; 20:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Epidemiological studies of associations between metabolites and cancer risk have typically focused on specific cancer types separately. Here, we designed a multivariate pan-cancer analysis to identify metabolites potentially associated with multiple cancer types, while also allowing the investigation of cancer type-specific associations.Methods: We analysed targeted metabolomics data available for 5828 matched case-control pairs from cancer-specific case-control studies on breast, colorectal, endometrial, gallbladder, kidney, localized and advanced prostate cancer, and hepatocellular carcinoma nested within the European Prospective Investigation into Cancer and Nutrition (EPIC) cohort. From pre-diagnostic blood levels of an initial set of 117 metabolites, 33 cluster representatives of strongly correlated metabolites and 17 single metabolites were derived by hierarchical clustering. The mutually adjusted associations of the resulting 50 metabolites with cancer risk were examined in penalized conditional logistic regression models adjusted for body mass index, using the data-shared lasso penalty.Results: Out of the 50 studied metabolites, (i) six were inversely associated with the risk of most cancer types: glutamine, butyrylcarnitine, lysophosphatidylcholine a C18:2, and three clusters of phosphatidylcholines (PCs); (ii) three were positively associated with most cancer types: proline, decanoylcarnitine, and one cluster of PCs; and (iii) 10 were specifically associated with particular cancer types, including histidine that was inversely associated with colorectal cancer risk and one cluster of sphingomyelins that was inversely associated with risk of hepatocellular carcinoma and positively with endometrial cancer risk.Conclusions: These results could provide novel insights for the identification of pathways for cancer development, in particular those shared across different cancer types.
|
|
| 10. |
- Chajès, Véronique, et al.
(författare)
-
Plasma Elaidic Acid Level as Biomarker of Industrial Trans Fatty Acids and Risk of Weight Change: Report from the EPIC Study.
- 2015
-
Ingår i: PLoS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 10:2
-
Tidskriftsartikel (refereegranskat)abstract
- Few epidemiological studies have examined the association between dietary trans fatty acids and weight gain, and the evidence remains inconsistent. The main objective of the study was to investigate the prospective association between biomarker of industrial trans fatty acids and change in weight within the large study European Prospective Investigation into Cancer and Nutrition (EPIC) cohort.
|
|
| 11. |
- Ciftci, Baris, et al.
(författare)
-
Wireless Communication in Modular Multilevel Converters and Electromagnetic Interference Characterization
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- The wireless control of modular multilevel converter (MMC) submodules was recently proposed. The success of the control depends on specialized control methods suitable for wireless communication and a properly designed wireless communication network in the MMC valve hall while aiming for low latency and high reliability. The wireless communication in the hall can be affected by the electromagnetic interference (EMI) of MMC submodules, voltage and current transients. In this article, firstly, a wireless communication network based on 5G New Radio is designed for an example full-scale MMC valve hall. After that, radiated EMI characteristics of MMC submodules with different voltage and current ratings and two dc circuit breakers are measured. The effects of EMI on wireless communication in the multi-GHz frequency band are tested. The interference from the components is confined below 500 MHz, and the wireless communication with 5825 MHz center frequency is not affected by the interference.
|
|
| 12. |
- Ciftci, Baris, 1987-, et al.
(författare)
-
Wireless Communication in Modular Multilevel Converters and Electromagnetic Interference Characterization
- 2022
-
Ingår i: IEEE Access. - : Institute of Electrical and Electronics Engineers (IEEE). - 2169-3536. ; , s. 38189-38201
-
Tidskriftsartikel (refereegranskat)abstract
- The wireless control of modular multilevel converter (MMC) submodules was recently proposed. The success of the control depends on specialized control methods suitable for wireless communication and a properly designed wireless communication network in the MMC valve hall while aiming for low latency and high reliability. The wireless communication in the hall can be affected by the electromagnetic interference (EMI) of MMC submodules, voltage and current transients. In this article, firstly, a wireless communication network based on 5G New Radio is designed for an example full-scale MMC valve hall. After that, the radiated EMI characteristics of the MMC submodules with different voltage and current ratings and two dc circuit breakers are measured. The effects of EMI on wireless communication in the multi-GHz frequency band are tested. The interference from the components is confined below 500 MHz, and the wireless communication with 5825 MHz center frequency is not affected by the interference.
|
|
| 13. |
- Colette, Augustin, et al.
(författare)
-
EURODELTA-Trends, a multi-model experiment of air quality hindcast in Europe over 1990–2010
- 2017
-
Ingår i: Geoscientific Model Development. - : Copernicus GmbH. - 1991-959X .- 1991-9603. ; 10:9, s. 3255-3276
-
Tidskriftsartikel (refereegranskat)abstract
- The EURODELTA-Trends multi-model chemistry-transport experiment has been designed to facilitate a better understanding of the evolution of air pollution and its drivers for the period 1990–2010 in Europe. The main objective of the experiment is to assess the efficiency of air pollutant emissions mitigation measures in improving regional-scale air quality. The present paper formulates the main scientific questions and policy issues being addressed by the EURODELTA-Trends modelling experiment with an emphasis on how the design and technical features of the modelling experiment answer these questions. The experiment is designed in three tiers, with increasing degrees of computational demand in order to facilitate the participation of as many modelling teams as possible. The basic experiment consists of simulations for the years 1990, 2000, and 2010. Sensitivity analysis for the same three years using various combinations of (i) anthropogenic emissions, (ii) chemical boundary conditions, and (iii) meteorology complements it. The most demanding tier consists of two complete time series from 1990 to 2010, simulated using either time-varying emissions for corresponding years or constant emissions. Eight chemistry-transport models have contributed with calculation results to at least one experiment tier, and five models have – to date – completed the full set of simulations (and 21-year trend calculations have been performed by four models). The modelling results are publicly available for further use by the scientific community. The main expected outcomes are (i) an evaluation of the models' performances for the three reference years, (ii) an evaluation of the skill of the models in capturing observed air pollution trends for the 1990–2010 time period, (iii) attribution analyses of the respective role of driving factors (e.g. emissions, boundary conditions, meteorology), (iv) a dataset based on a multi-model approach, to provide more robust model results for use in impact studies related to human health, ecosystem, and radiative forcing.
|
|
| 14. |
- Kanoni, Stavroula, et al.
(författare)
-
Implicating genes, pleiotropy, and sexual dimorphism at blood lipid loci through multi-ancestry meta-analysis.
- 2022
-
Ingår i: Genome biology. - : Springer Science and Business Media LLC. - 1474-760X .- 1465-6906 .- 1474-7596. ; 23:1
-
Tidskriftsartikel (refereegranskat)abstract
- Genetic variants within nearly 1000 loci are known to contribute to modulation of blood lipid levels. However, the biological pathways underlying these associations are frequently unknown, limiting understanding of these findings and hindering downstream translational efforts such as drug target discovery.To expand our understanding of the underlying biological pathways and mechanisms controlling blood lipid levels, we leverage a large multi-ancestry meta-analysis (N=1,654,960) of blood lipids to prioritize putative causal genes for 2286 lipid associations using six gene prediction approaches. Using phenome-wide association (PheWAS) scans, we identify relationships of genetically predicted lipid levels to other diseases and conditions. We confirm known pleiotropic associations with cardiovascular phenotypes and determine novel associations, notably with cholelithiasis risk. We perform sex-stratified GWAS meta-analysis of lipid levels and show that 3-5% of autosomal lipid-associated loci demonstrate sex-biased effects. Finally, we report 21 novel lipid loci identified on the X chromosome. Many of the sex-biased autosomal and X chromosome lipid loci show pleiotropic associations with sex hormones, emphasizing the role of hormone regulation in lipid metabolism.Taken together, our findings provide insights into the biological mechanisms through which associated variants lead to altered lipid levels and potentially cardiovascular disease risk.
|
|
| 15. |
- Otero, Noelia, et al.
(författare)
-
A multi-model comparison of meteorological drivers of surface ozone over Europe
- 2018
-
Ingår i: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 18:16, s. 12269-12288
-
Tidskriftsartikel (refereegranskat)abstract
- The implementation of European emission abatement strategies has led to a significant reduction in the emissions of ozone precursors during the last decade. Ground-level ozone is also influenced by meteorological factors such as temperature, which exhibit interannual variability and are expected to change in the future. The impacts of climate change on air quality are usually investigated through air-quality models that simulate interactions between emissions, meteorology and chemistry. Within a multi-model assessment, this study aims to better understand how air-quality models represent the relationship between meteorological variables and surface ozone concentrations over Europe. A multiple linear regression (MLR) approach is applied to observed and modelled time series across 10 European regions in springtime and summertime for the period of 2000-2010 for both models and observations. Overall, the air-quality models are in better agreement with observations in summertime than in springtime and particularly in certain regions, such as France, central Europe or eastern Europe, where local meteorological variables show a strong influence on surface ozone concentrations. Larger discrepancies are found for the southern regions, such as the Balkans, the Iberian Peninsula and the Mediterranean basin, especially in springtime. We show that the air-quality models do not properly reproduce the sensitivity of surface ozone to some of the main meteorological drivers, such as maximum temperature, relative humidity and surface solar radiation. Specifically, all air-quality models show more limitations in capturing the strength of the ozone-relative-humidity relationship detected in the observed time series in most of the regions, for both seasons. Here, we speculate that dry-deposition schemes in the air-quality models might play an essential role in capturing this relationship. We further quantify the relationship between ozone and maximum temperature (m(o3-T), climate penalty) in observations and air-quality models. In summertime, most of the air-quality models are able to reproduce the observed climate penalty reasonably well in certain regions such as France, central Europe and northern Italy. However, larger discrepancies are found in springtime, where air-quality models tend to overestimate the magnitude of the observed climate penalty.
|
|
