| 1. |
- Yamada, Takashi, et al.
(författare)
-
Nitrosative modifications of the Ca2+ release complex and actin underlie arthritis-induced muscle weakness.
- 2015
-
Ingår i: Annals of the Rheumatic Diseases. - : BMJ. - 1468-2060 .- 0003-4967. ; 74:10, s. 1907-1914
-
Tidskriftsartikel (refereegranskat)abstract
- Skeletal muscle weakness is a prominent clinical feature in patients with rheumatoid arthritis (RA), but the underlying mechanism(s) is unknown. Here we investigate the mechanisms behind arthritis-induced skeletal muscle weakness with special focus on the role of nitrosative stress on intracellular Ca(2+) handling and specific force production.
|
|
| 2. |
- Ananta, M, et al.
(författare)
-
A Poly(Lactic Acid-Co-Caprolactone)–Collagen Hybrid for Tissue Engineering Applications
- 2009
-
Ingår i: Tissue engineering Part A. - : Mary Ann Liebert, Inc.. - 1937-3341 .- 1937-335X. ; 15:7, s. 1667-1675
-
Tidskriftsartikel (refereegranskat)abstract
- A biodegradable hybrid scaffold consisting of a synthetic polymer, poly(lactic acid-co-caprolactone) (PLACL), and a naturally derived polymer, collagen, was constructed by plastic compressing hyperhydrated collagen gels onto a flat warp-knitted PLACL mesh. The collagen compaction process was characterized, and it was found that the duration, rather than the applied load under the test conditions in the plastic compression, was the determining factor of the collagen and cell density in the cell-carrying component. Cells were spatially distributed in three different setups and statically cultured for a period of 7 days. Short-term biocompatibility of the hybrid construct was quantitatively assessed with AlamarBlue and qualitatively with fluorescence staining and confocal microscopy. No significant cell death was observed after the plastic compression of the interstitial equivalents, confirming previous reports of good cell viability retention. The interstitial, epithelial, and composite tissue equivalents showed no macroscopic signs of contraction and good cell proliferation with a two- to threefold increase in cell number over 7 days. Quantitative analysis showed a homogenous cell distribution and good biocompatibility. The results indicate that viable and proliferating multilayered tissue equivalents can be engineered using the PLACL-collagen hybrid construct in the space of several hours.
|
|
| 3. |
- Asplund, Basse, et al.
(författare)
-
In vitro degradation and in vivo biocompatibility study of a new linear poly(urethane urea)
- 2008
-
Ingår i: Journal of biomedical materials research. Part B: Applied biomaterials. - : Wiley. - 1552-4973 .- 1552-4981. ; 86B:1, s. 45-55
-
Tidskriftsartikel (refereegranskat)abstract
- Segmented poly(urethane urea)s (PUUs) with hard segments derived only from methyl 2,6-diisocyantohexanoate (LDI) without the use of a chain extender have previously been described. These materials, which contain hard segments with multiple urea linkages, show exceptionally high strain capability (1600-4700%). In the study reported here, the rate and effect of hydrolysis of these materials were determined for gamma-sterilized and nonsterilized samples. Materials investigated contained PCL, PTMC, P(TMC-co-CL), P(CL-co-DLLA), or P(TMC-co-DLLA) as soft segments and, as well as their mechanical properties, changes in mass, inherent viscosity (IN.), and thermal properties were studied over 20 weeks. Results showed that the degradation rate was dependant on the soft segment structure, with a higher rate of degradation for the polyester-dominating PUUs exhibiting a substantial loss in IN. A tendency of reduction of tensile strength and strain hardening was seen for all samples. Also, loss in elongation at break was detected, for PUU-P(CL-DLLA) it went from 1600% to 830% in 10 weeks. Gamma radiation caused an initial loss in I.V. and induced more rapid hydrolysis compared with nonsterilized samples, except for PUU-PTMC. A cytotoxicity test using human fibroblasts demonstrated that the material supports cell viability. In addition, an in vivo biocompatibility study showed a typical foreign body reaction after I and 6 weeks.
|
|
| 4. |
- Atthoff, Björn, et al.
(författare)
-
Polarized protein membrane for high cell seeding efficiency
- 2007
-
Ingår i: Journal of Biomedical Materials Research - Part B Applied Biomaterials. - : Wiley. - 1552-4973 .- 1552-4981. ; 83:2, s. 472-480
-
Tidskriftsartikel (refereegranskat)abstract
- A new type of scaffold for tissue engineering was developed to give enhanced cell seeding in three dimensions. A gradient of either collagen or fibrin protein was prepared, supported by a knitted poly(ethylene terephtalate) PET fabric. The membranes were, after hydrolysis and acetic acid wash, submerged in a protein solution for adsorption followed by immersion into a gelling agent. The immediate contact between the protein solution held by the fabric and the gelling agent resulted in a dense, fibrous protein network with pore sizes around 0.5 μm at the surface, and larger pores of 10-50 μm size throughout the interior of the fabric as observed by scanning electron microscopy. By separating the fabric double layers holding this network, a gradient porosity membrane was produced. To evaluate the fractions of cells trapped in the matrix upon seeding, i.e. the seeding efficiency, 500 μl 3T3 fibroblasts cell suspension containing one million cells was seeded by filtering through the gradient protein membrane. For both the collagen and fibrin membranes, the seeding efficiency was ∼93%, which was significantly higher than that of 28% from the corresponding PET fabric without protein immobilization. Attempt to seed cells from the dense side of the protein networks resulted in no cell penetration into the scaffold. Histology on subsequent culture of the cells in the scaffold demonstrated viability and proliferation in three dimensions throughout the scaffold. This new and simple way of producing scaffolds play an important role when the cells are precious or scarce and cell seeding in three dimensions is important.
|
|
| 5. |
- Aulin, Cecilia, et al.
(författare)
-
Cell produced ECM on engineered polymer structures
- 2006
-
Ingår i: Tissue Engineering and Regenerative Medicine International Society Conference, Rotterdam, 08 – 11 oktober 2006, oral presentation.
-
Konferensbidrag (populärvet., debatt m.m.)
|
|
| 6. |
|
|
| 7. |
- Aulin, Cecilia, et al.
(författare)
-
Designing Extracellular Matrix Scaffolds by Dynamic culture of fibroblasts
- 2007
-
Ingår i: TERMIS-EU Meeting Abstracts London, UK September 4–7, 2007. - : Mary Ann Liebert. ; , s. 1667-1667
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Our bodies are constantly exposed to different sorts of mechanical forces, from muscle tension to wound healing. Connective tissue adapts its extracellular matrix (ECM) to changes in mechanical load and the influence of mechanical stimulation on fibroblasts has been studied for a long time [1, 2]. When exposed to forces, fibroblasts are known to respond with expression and remodeling of ECM proteins, in particular collagen type I [3]. In this study the effect of dynamic culture conditions on human dermal fibroblasts was evaluated in terms of deposition and remodeling of ECM, with the aim of producing an ECM based scaffold. The fibroblasts were grown on compliant polymer supports either in a bioreactor with a pulsating flow or under static conditions. By applying dynamic culture conditions, the collagen deposition on the polymer supports increased fivefold. Scanning electron microscopy showed that polymer fibers were well integrated with cells and ECM and alignment along the polymer fibers was observed. Scaffold design should aim at creating structures that can help guiding the cells to form new, functional tissue. The presented system may present a new way of producing designed extracellular matrix based scaffolds for tissue engineering.
|
|
| 8. |
|
|
| 9. |
- Aulin, Cecilia, 1979-
(författare)
-
Extracellular Matrix Based Materials for Tissue Engineering
- 2010
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The extracellular matrix is (ECM) is a network of large, structural proteins and polysaccharides, important for cellular behavior, tissue development and maintenance. Present thesis describes work exploring ECM as scaffolds for tissue engineering by manipulating cells cultured in vitro or by influencing ECM expression in vivo. By culturing cells on polymer meshes under dynamic culture conditions, deposition of a complex ECM could be achieved, but with low yields. Since the major part of synthesized ECM diffused into the medium the rate limiting step of deposition was investigated. This quantitative analysis showed that the real rate limiting factor is the low proportion of new proteins which are deposited as functional ECM. It is suggested that cells are pre-embedded in for example collagen gels to increase the steric retention and hence functional deposition. The possibility to induce endogenous ECM formation and tissue regeneration by implantation of growth factors in a carrier material was investigated. Bone morphogenetic protein-2 (BMP-2) is a growth factor known to be involved in growth and differentiation of bone and cartilage tissue. The BMP-2 processing and secretion was examined in two cell systems representing endochondral (chondrocytes) and intramembranous (mesenchymal stem cells) bone formation. It was discovered that chondrocytes are more efficient in producing BMP-2 compared to MSC. The role of the antagonist noggin was also investigated and was found to affect the stability of BMP-2 and modulate its effect. Finally, an injectable gel of the ECM component hyaluronan has been evaluated as delivery vehicle in cartilage regeneration. The hyaluronan hydrogel system showed promising results as a versatile biomaterial for cartilage regeneration, could easily be placed intraarticulary and can be used for both cell based and cell free therapies.
|
|
| 10. |
|
|
| 11. |
- Aulin, Cecilia, et al.
(författare)
-
Extracellular matrix-polymer hybrid materials produced in a pulsed-flow bioreactor system
- 2009
-
Ingår i: Journal of Tissue Engineering and Regenerative Medicine. - : John Wiley & Sons, Ltd. - 1932-6254 .- 1932-7005. ; 3:3, s. 188-195
-
Tidskriftsartikel (refereegranskat)abstract
- Cell adhesion, interaction with material, cell proliferation and the production of an extracellular matrix (ECM) are all important factors determining the successful performance of an engineered scaffold. Scaffold design should aim at creating structures which can guide cells into forming new, functional tissue. In this study, the concept of in situ deposition of ECM by human dermal fibroblasts onto a compliant, knitted poly (ethyleneterephtalate) support is demonstrated, creating in vitro produced ECM polymer hybrid materials for tissue engineering. Comparison of cells cultured under static and dynamic conditions were examined, and the structure and morphology of the materials so formed were evaluated, along with the amount collagen deposited by the seeded cells. In vitro produced ECM polymer hybrid scaffolds could be created in this way, with the dynamic culture conditions increasing ECM deposition. Histological analysis indicated a homogenous distribution of cells in the 1 mm thick scaffold, surrounded by a matrix-like structure. ECM deposition was observed throughout the materials wigh 81.6 µg/cm2 of collagen deposited after 6 weeks. Cell produced bundles of ECM fibres bridged the polymer filaments and anchored cells to the support. These findings open hereto unknown possibilities of producing materials with structure designed by engineering together with biochemical composition given by cells.
|
|
| 12. |
- Aulin, Cecilia, et al.
(författare)
-
In situ cross-linkable hyaluronan hydrogel enhances chondrogenesis
- 2011
-
Ingår i: Journal of tissue engineering and regenerative medicine. - : Hindawi Limited. - 1932-6254 .- 1932-7005. ; 5:8, s. E188-E196
-
Tidskriftsartikel (refereegranskat)abstract
- The present work describes the feasibility of a cross-linkable injectable hyaluronan hydrogel for cartilage repair. The hydrogel used is a two-component system based on aldehyde-modified hyaluronan and hydrazide-modified polyvinyl alcohol, which are rapidly cross-linked in situ upon mixing. The in vitro study showed that chondrocytes and mesenchymal cells cultured in the gel form cartilage-like tissue, rich in glycosaminoglycans, collagen type II and aggrecan. In a rabbit animal model the injection of the hydrogel improved the healing of a full-thickness cartilage defect created in the knee as compared to non-treated controls. This rabbit study showed that the regenerated cartilage defects stained more intensely for type II collagen upon treatment with the hydrogel. The hyaluronan-based hydrogel may be used as a delivery vehicle for both growth factors and/or cells for cartilage repair. The in vivo study also indicated that the hydrogel alone has a beneficial effect on cartilage regeneration.
|
|
| 13. |
- Aulin, Cecilia, et al.
(författare)
-
In vitro/ Produced Extracellular Matrix Scaffolds
- 2005
-
Ingår i: European Tissue Engineering Society International Conference, München 8 Aug – 3 sept 2005, oral presentation.
-
Konferensbidrag (populärvet., debatt m.m.)
|
|
| 14. |
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
- Foroughi, Farhad, et al.
(författare)
-
Bulk collagen incorporation rates into knitted stiff fibre polymer in tissue-engineered scaffolds : the rate-limiting step
- 2008
-
Ingår i: Journal of Tissue Engineering and Regenerative Medicine. - : John Wiley & Sons, Ltd.. - 1932-6254 .- 1932-7005. ; 2:8, s. 507-514
-
Tidskriftsartikel (refereegranskat)abstract
- Fabrication of tissue-engineered constructs in vitro relies on sufficient synthesis of extracellular matrix (ECM) by cells to form a material suitable for normal function in vivo. Collagen synthesis by human dermal fibroblasts grown in vitro on two polymers, polyethylene terephthalate (PET) and polyglycolic acid (PGA), was measured by high-performance liquid chromatography (HPLC). Cells were either cultured in a dynamic environment, where meshes were loaded onto a pulsing tube in a bioreactor, or in a static environment without pulsing. Collagen synthesis by cells cultured on a static mesh increased by six-fold compared to monolayer culture, and increased by up to a further 5.4-fold in a pulsed bioreactor. However, little of the collagen synthesized was deposited onto the meshes, almost all being lost to the medium. The amount of collagen deposited onto meshes was highest when cells were cultured dynamically on PET meshes (17.6 µg), but deposition still represented only 1.4% of the total synthesized. Although total collagen synthesis was increased by the use of 3D culture and the introduction of pulsing, the results suggest that the limiting factor for fabrication of a tissue-engineered construct within practical timescales is not the amount of collagen synthesized but the quantity retained (i.e. deposited) within the construct during culture. This may be enhanced by systems which promote or assemble true 3D multi-layers of cells.
|
|
| 19. |
|
|
| 20. |
- Lundbäck, Peter, et al.
(författare)
-
A novel high mobility group box 1 neutralizing chimeric antibody attenuates drug-induced liver injury and postinjury inflammation in mice
- 2016
-
Ingår i: Hepatology. - : Ovid Technologies (Wolters Kluwer Health). - 0270-9139 .- 1527-3350. ; 64:5, s. 1699-1710
-
Tidskriftsartikel (refereegranskat)abstract
- Acetaminophen (APAP) overdoses are of major clinical concern. Growing evidence underlines a pathogenic contribution of sterile postinjury inflammation in APAP-induced acute liver injury (APAP-ALI) and justifies development of anti-inflammatory therapies with therapeutic efficacy beyond the therapeutic window of the only current treatment option, N-acetylcysteine (NAC). The inflammatory mediator, high mobility group box 1 (HMGB1), is a key regulator of a range of liver injury conditions and is elevated in clinical and preclinical APAP-ALI. The anti-HMGB1 antibody (m2G7) is therapeutically beneficial in multiple inflammatory conditions, and anti-HMGB1 polyclonal antibody treatment improves survival in a model of APAP-ALI. Herein, we developed and investigated the therapeutic efficacy of a partly humanized anti-HMGB1 monoclonal antibody (mAb; h2G7) and identified its mechanism of action in preclinical APAP-ALI. The mouse anti-HMGB1 mAb (m2G7) was partly humanized (h2G7) by merging variable domains of m2G7 with human antibody-Fc backbones. Effector function-deficient variants of h2G7 were assessed in comparison with h2G7 in vitro and in preclinical APAP-ALI. h2G7 retained identical antigen specificity and comparable affinity as m2G7. 2G7 treatments significantly attenuated APAP-induced serum elevations of alanine aminotransferase and microRNA-122 and completely abrogated markers of APAP-induced inflammation (tumor necrosis factor, monocyte chemoattractant protein 1, and chemokine [C-X-C motif] ligand 1) with prolonged therapeutic efficacy as compared to NAC. Removal of complement and/or Fc receptor binding did not affect h2G7 efficacy. Conclusion: This is the first report describing the generation of a partly humanized HMGB1-neutralizing antibody with validated therapeutic efficacy and with a prolonged therapeutic window, as compared to NAC, in APAP-ALI. The therapeutic effect was mediated by HMGB1 neutralization and attenuation of postinjury inflammation. These results represent important progress toward clinical implementation of HMGB1-specific therapy as a means to treat APAP-ALI and other inflammatory conditions. (Hepatology 2016;64:1699-1710).
|
|
| 21. |
- Martinez-Crespiera, Sandra, et al.
(författare)
-
Use of Nanocellulose to Produce Water-Based Conductive Inks with Ag NPs for Printed Electronics
- 2022
-
Ingår i: International Journal of Molecular Sciences. - : MDPI AG. - 1661-6596 .- 1422-0067. ; 23:6
-
Tidskriftsartikel (refereegranskat)abstract
- The need for more sustainable printed electronics has emerged in the past years. Due to this, the use of nanocellulose (NC) extracted from cellulose has recently been demonstrated to provide interesting materials such as functional inks and transparent flexible films due to its properties. Its high specific surface area together with the high content of reactive hydroxyl groups provide a highly tailorable surface chemistry with applications in ink formulations as a stabilizing, capping, binding and templating agent. Moreover, NC mechanical, physical and thermal properties (high strength, low porosity and high thermal stability, respectively) provide an excellent alternative for the currently used plastic films. In this work, we present a process for the production of water-based conductive inks that uses NC both as a template for silver nanoparticles (Ag NPs) formation and as an ink additive for ink formulation. The new inks present an electrical conductivity up to 2 × 106 S/m, which is in the range of current commercially available conductive inks. Finally, the new Ag NP/NC-based conductive inks have been tested to fabricate NFC antennas by screen-printing onto NC-coated paper, demonstrating to be operative.
|
|
| 22. |
- Struglics, André, et al.
(författare)
-
Juvenile idiopathic arthritis patients have a distinct cartilage and bone biomarker profile that differs from healthy and knee-injured children
- 2020
-
Ingår i: Clinical and Experimental Rheumatology. - : Clinical and Experimental Rheumatology. - 0392-856X .- 1593-098X. ; 38:2, s. 355-365
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVES: Joint destruction is a hallmark of juvenile idiopathic arthritis (JIA). Clinical evaluation and radiographic imaging are current methods to identify destruction. Biomarkers could aid an earlier and more sensitive diagnosis. Our aim was to investigate levels of bone and cartilage degradation biomarkers in JIA patients, compared to healthy children or juveniles with knee injuries. METHODS: Triple-paired synovial fluid, plasma and urine samples from 29 JIA patients were compared to 61 plasma samples from healthy children and synovial fluid from 41 knee-injured juveniles. Cartilage biomarkers ARGS neoepitope of aggrecan (ARGS), cartilage oligomeric matrix protein (COMP), type II collagen epitope (C2C), bone biomarkers N-terminal type I collagen cross-linked telopeptide (NTX-I) and tartrate-resistant acid phosphatase 5b (TRAP5b) were analysed by immunoassays. RESULTS: Plasma levels of ARGS, C2C, COMP and TRAP5b were increased in JIA compared to healthy children. Compared to knee-injured juveniles, synovial fluid C2C and TRAP5b were increased in JIA, while ARGS and COMP were decreased. For JIA patients, local (synovial fluid) and systemic (plasma/urine) levels of bone biomarkers correlated positively; age correlated negatively to plasma levels of C2C and TRAP5b; no correlation was found between biomarkers and gender, affected joint count, disease duration or medication. CONCLUSIONS: Elevated levels of destruction biomarkers in JIA compared to healthy children indicate a potential to serve as clinical tools for destructive joint disease. High levels of TRAP5b, NTX-I and collagen II in JIA in contrast to more pronounced aggrecan and COMP degradation in juvenile knee injuries, suggests that JIA patients have a unique biomarker pattern, different from healthy and knee-injured children.
|
|
