| 1. |
- Buker, O., et al.
(författare)
-
Metrological support for LNG custody transfer and transport
- 2016
-
Ingår i: Proceedings of the 17th International Flow Measurement Conference (FLOMEKO 2016).
-
Konferensbidrag (refereegranskat)abstract
- In the framework of the ongoing EMRP Joint Research Project (JRP) ENG 60 “Metrology for LNG” (2014-2017), co-funded by the European Union, a number of metrological challenges associated with custody transfer and transport of LNG will be faced. The project consists of four technical work packages (WP), whereby the main objective is to reduce the measurement uncertainty of LNG custody transfer by a factor two. The focus in WP1 is the design and development of a traceable mid-scale calibration standard for LNG mass and volume flow. The goal is to provide traceable mass and volume flow calibrations up to 400 m3/h (180000 kg/h). In WP2, the emphasis is on the development and validation of a LNG sampling and composition measurement reference standard, consisting of sampler, vaporizer, gas standards, and gas chromatography (GC), which will be used to test and calibrate commercially available LNG sampling and composition measurement systems. The priority in WP3 is given to the development and validation of a method for the determination of the methane number, including correlations based on the LNG composition and corrections for traces of nitrogen and higher hydrocarbons. Since physical properties and quantities play an important role in LNG custody transfer, WP4 comprises reference quality density measurements of LNG to validate and improve models for LNG density predictions, the uncertainty evaluation of enthalpy and calorific value calculations and the development of a novel cryogenic sensor for the simultaneous measurement of speed-of-sound and density. The present paper gives an overview of recently achieved objectives within the project and provides an outlook to future activities.
|
|
| 2. |
- Buker, P., et al.
(författare)
-
DO3SE modelling of soil moisture to determine ozone flux to forest trees
- 2012
-
Ingår i: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 12:12, s. 5537-5562
-
Tidskriftsartikel (refereegranskat)abstract
- The DO3SE (Deposition of O-3 for Stomatal Exchange) model is an established tool for estimating ozone (O-3) deposition, stomatal flux and impacts to a variety of vegetation types across Europe. It has been embedded within the EMEP (European Monitoring and Evaluation Programme) photochemical model to provide a policy tool capable of relating the flux-based risk of vegetation damage to O-3 precursor emission scenarios for use in policy formulation. A key limitation of regional flux-based risk assessments has been the assumption that soil water deficits are not limiting O-3 flux due to the unavailability of evaluated methods for modelling soil water deficits and their influence on stomatal conductance (g(sto)), and subsequent O-3 flux. This paper describes the development and evaluation of a method to estimate soil moisture status and its influence on g(sto) for a variety of forest tree species. This DO3SE soil moisture module uses the Penman-Monteith energy balance method to drive water cycling through the soil-plant-atmosphere system and empirical data describing g(sto) relationships with pre-dawn leaf water status to estimate the biological control of transpiration. We trial four different methods to estimate this biological control of the transpiration stream, which vary from simple methods that relate soil water content or potential directly to g(sto), to more complex methods that incorporate hydraulic resistance and plant capacitance that control water flow through the plant system. These methods are evaluated against field data describing a variety of soil water variables, g(sto) and transpiration data for Norway spruce (Picea abies), Scots pine (Pinus sylvestris), birch (Betula pendula), aspen (Populus tremuloides), beech (Fagus sylvatica) and holm oak (Quercus ilex) collected from ten sites across Europe and North America. Modelled estimates of these variables show consistency with observed data when applying the simple empirical methods, with the timing and magnitude of soil drying events being captured well across all sites and reductions in transpiration with the onset of drought being predicted with reasonable accuracy. The more complex methods, which incorporate hydraulic resistance and plant capacitance, perform less well, with predicted drying cycles consistently underestimating the rate and magnitude of water loss from the soil. A sensitivity analysis showed that model performance was strongly dependent upon the local parameterisation of key model drivers such as the maximum g(sto), soil texture, root depth and leaf area index. The results suggest that the simple modelling methods that relate g(sto) directly to soil water content and potential provide adequate estimates of soil moisture and influence on g(sto) such that they are suitable to be used to assess the potential risk posed by O-3 to forest trees across Europe.
|
|
| 3. |
|
|
| 4. |
- de Huu, M., et al.
(författare)
-
Design of gravimetric primary standards for field-testing of hydrogen refuelling stations
- 2020
-
Ingår i: Flow Measurement and Instrumentation. - : Elsevier Ltd. - 0955-5986 .- 1873-6998. ; 73
-
Tidskriftsartikel (refereegranskat)abstract
- The Federal Institute of Metrology METAS developed a Hydrogen Field Test Standard (HFTS) that can be used for field verification and calibration of hydrogen refuelling stations. The testing method is based on the gravimetric principle. The experimental design of the HFTS as well as the description of the method are presented here. The HFTS has been tested at METAS with nitrogen gas at −40 °C to mimic a refuelling process in the field. Laboratory tests have shown that icing on the pipes of the HFTS have a non-negligible impact on the results. Field-testing with the HFTS has also been performed at the Empa hydrogen refuelling station with hydrogen at up to 70 MPa. The major uncertainty components have been identified and assigned values. The required expanded uncertainty of 0.3% could be achieved. A detailed uncertainty budget has been presented and shows that the scale is the largest contributor; buoyancy corrections only play a minor role. For the lowest uncertainty measurements, appropriate waiting times or cleaning methods to get rid of icing are required. © 2020 The Authors
|
|
| 5. |
- Lucas, P., et al.
(författare)
-
World’s first LNG research and calibration facility
- 2016
-
Ingår i: Proceedings of the 17th International Flow Measurement Conference (FLOMEKO 2016).
-
Konferensbidrag (refereegranskat)abstract
- A Liquefied Natural Gas (LNG) flowmeter research and calibration facility is being built in Rotterdam by the Dutch metrology institute VSL. This cryogenic test loop will also be used to test and develop LNG analysers, new technologies and devices for measurement of LNG physical properties. The facility will consist of a Primary Standard Loop (PSL) that can measure the mass of LNG flows traceable to the International Kilogram standard in Paris. The primary standard is capable of flow measurements up to 25 m3/hr. A second Midscale Standard Loop (MSL) will measure volumetric flow rate of up to 200 m3/h, expandable to at least 400 m3/h in the future. The Midscale standard is traceable to the PSL and scales the flowrate up using bootstrapping techniques. This paper describes the combined PSL and MSL facility, its objectives, and accomplishments to date.
|
|
| 6. |
- Mills, Gina, 1959, et al.
(författare)
-
New stomatal flux-based critical levels for ozone effects on vegetation
- 2011
-
Ingår i: Atmospheric Environment. - : Elsevier BV. - 1873-2844 .- 1352-2310. ; 45:28, s. 5064-5068
-
Tidskriftsartikel (refereegranskat)abstract
- The critical levels for ozone effects on vegetation have been reviewed and revised by the LRTAP Convention. Eight new or revised critical levels based on the accumulated stomatal flux of ozone (POD gamma, the Phytotoxic Ozone Dose above a threshold flux of Y nmol m(-2) PLA s(-1), where PLA is the projected leaf area) have been agreed. For each receptor, data were combined from experiments conducted under naturally fluctuating environmental conditions in 2-4 countries, resulting in linear dose response relationships with response variables specific to each receptor (r(2) = 0.49-0.87, p
|
|
| 7. |
- Buker, P, et al.
(författare)
-
Comparison of different stomatal conductance algorithms for ozone flux modelling
- 2005
-
Ingår i: UNECE – Workshop “Critical Levels of Ozone: Further applying and developing the flux-based concept”, Obergurgl, 15-19 November 2005.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Two widely used algorithms for modelling stomatal conductance (gs) were compared in order to evaluate the approach leading to the most realistic predictions of stomatal fluxes to vegetated surfaces: a multiplicative algorithm initially developed by Jarvis (1976) and refined by Emberson et al. (2000) (DO3SE ) and a photosynthesis-based Ball&Berry-type algorithm developed by Nikolov et al. (1995) (LEAFC3). Both models were parameterised for several crop and tree species (wheat, grapevine, Scots pine, beech and birch) and have been applied to various datasets – with the main focus on wheat - representing different European regions (North, Central and South Europe). A sensitivity analysis has been carried out for both models to evaluate the dependence of gs on the meteorological parameters temperature, photosynthetic active radiation and vapour pressure deficit. Furthermore, in order to test whether a general species-specific parameterisation can account for differences in gs due to plants growing under different climatic conditions throughout Europe, the models have been re-parameterised for local meteorological conditions. A direct comparison of both models showed that the net photosynthetic-based model required more detailed meteorological (e.g. ambient CO2-concentration, dew-point temperature) and plant-physiological (e.g. Vcmax and Jmax) input parameters while not delivering a substantially higher R2 when comparing measured and modelled gs. The relative weakness of the multiplicative model lies in its dependence on the maximum stomatal conductance (gmax), whereas the photosynthesis-based model is not taking into account phenology-related changes in gs. Furthermore, the results show that an equally close relationship between gs and net photosynthetic rate throughout the entire growing season is questionable. We conclude that the multiplicative approach is favourable for calculating stomatal fluxes on a wider scale (e.g. within EMEP-deposition model), whereas the photosynthesis-based approach is a potential alternative for modelling fluxes on a local scale.
|
|
| 8. |
- Büker, P, et al.
(författare)
-
New flux based doseeresponse relationships for ozone for European forest tree species
- 2015
-
Ingår i: Environmental Pollution. - : Elsevier BV. - 0269-7491. ; 206, s. 163-174
-
Tidskriftsartikel (refereegranskat)abstract
- To derive O3 doseeresponse relationships (DRR) for five European forest trees species and broadleaf deciduous and needleleaf tree plant functional types (PFTs), phytotoxic O3 doses (PODy) were related to biomass reductions. PODy was calculated using a stomatal flux model with a range of cut-off thresholds (y) indicative of varying detoxification capacities. Linear regression analysis showed that DRR for PFT and individual tree species differed in their robustness. A simplified parameterisation of the flux model was tested and showed that for most non-Mediterranean tree species, this simplified model led to similarly robust DRR as compared to a species- and climate region-specific parameterisation. Experimentally induced soil water stress was not found to substantially reduce PODy, mainly due to the short duration of soil water stress periods. This study validates the stomatal O3 flux concept and represents a step forward in predicting O3 damage to forests in a spatially and temporally varying climate.
|
|
| 9. |
- Böckler, H B, et al.
(författare)
-
Metrology infrastructure for high-pressure gas and liquified hydrogen flows. A brief outline of the MetHyInfra project, measurement challenges, and first results
- 2024
-
Ingår i: Measurement. - : Elsevier B.V.. - 0263-2241 .- 1873-412X. ; 232
-
Tidskriftsartikel (refereegranskat)abstract
- This paper gives an overview of the ongoing Joint Research Project (JRP) 20IND11 “Metrology infrastructure for high pressure gas and liquefied hydrogen flows” (MetHyInfra), which will ensure traceability in the hydrogen distribution chain. For this purpose, very precise nozzles with well-defined geometries have been produced. In this project, Critical Flow Venturi Nozzles (CFVNs) will be traceably calibrated for the first time with hydrogen and pressures up to 100 MPa using a Coriolis Flow Meter (CFM) as a secondary standard. A CFM has been successfully calibrated with hydrogen against a gravimetric primary standard. Equations of State (EoS) are important for the high-pressure calibration of the nozzles, but also for Computational Fluid Dynamics (CFD) simulations. With regard to CFD, a numerical model has been developed to simulate high pressure hydrogen flow in the CFVN. In a parameter study, non-ideal nozzle shapes are investigated using a shape variation parameter. New Speed of Sound (SoS) measurements were conducted at temperatures from 273 to 323 K and pressures from 1 to 100 MPa. These new data were then used to develop a new EoS for normal hydrogen, optimized for gas phase calculations. In addition to gaseous hydrogen, the project has a strong focus on liquefied hydrogen. Here a three-pronged approach allows traceable measurements. Each of the approaches presented is based on a unique flow calibration principle and relies on independent traceability schemes. The results of the project will ensure traceable measurements and thus a higher level of confidence among end users. © 2024 The Authors
|
|
| 10. |
- De Huu, Marc A., et al.
(författare)
-
The European Research Project on Metrology for Hydrogen Vehicles - MetroHyVe
- 2018
-
Ingår i: Journal of Physics. - : Institute of Physics Publishing.
-
Konferensbidrag (refereegranskat)abstract
- A large hydrogen infrastructure is currently in development across Europe. However, the industry faces the dilemma that they are required to meet certain measurement requirements set by European legislation that cannot currently be followed due to the lack of available methods and standards. The EMPIR Metrology for Hydrogen Vehicles project will be the first large scale project of its kind that will tackle the four measurement challenges that currently prevent the industry from meeting requirements set by International Standards such as flow metering, quality control, quality assurance and sampling. This paper presents a brief overview of the specific objectives of the project and focuses on the flow metering work package and the presentation of its planned tasks, which comprise laboratory and measurements in the field. Laboratory work will assess the use of substitute fluids to hydrogen to provide a safer and more cost effective method for the type approval of Hydrogen Refuelling Stations (HRS). To be able to link laboratory work to field testing, mobile primary standards will be developed and the design of a field testing primary standard will be addressed. The aim is to inform what the European national metrology institutes are currently developing in the field of hydrogen flow metering and quality control of HRS.
|
|
| 11. |
- Franz, M., et al.
(författare)
-
Evaluation of simulated ozone effects in forest ecosystems against biomass damage estimates from fumigation experiments
- 2018
-
Ingår i: Biogeosciences. - : Copernicus GmbH. - 1726-4170 .- 1726-4189. ; 15:22, s. 6941-6957
-
Tidskriftsartikel (refereegranskat)abstract
- Regional estimates of the effects of ozone pollution on forest growth depend on the availability of reliable injury functions that estimate a representative ecosystem response to ozone exposure. A number of such injury functions for forest tree species and forest functional types have recently been published and subsequently applied in terrestrial biosphere models to estimate regional or global effects of ozone on forest tree productivity and carbon storage in the living plant biomass. The resulting impacts estimated by these biosphere models show large uncertainty in the magnitude of ozone effects predicted. To understand the role that these injury functions play in determining the variability in estimated ozone impacts, we use the O-CN biosphere model to provide a standardised modelling framework. We test four published injury functions describing the leaf-level, photosynthetic response to ozone exposure (targeting the maximum carboxylation capacity of Rubisco (V-cmax) or net pho-tosynthesis) in terms of their simulated whole-tree biomass responses against data from 23 ozone filtration/fumigation experiments conducted with young trees from European tree species at sites across Europe with a range of climatic conditions. Our results show that none of these previously published injury functions lead to simulated whole-tree biomass reductions in agreement with the observed dose-response relationships derived from these field experiments and instead lead to significant over-or underestimations of the ozone effect. By re-parameterising these photosynthetically based injury functions, we develop linear, plant-functional-typespecific dose-response relationships, which provide accurate simulations of the observed whole-tree biomass response across these 23 experiments.
|
|
| 12. |
- Harmens, H, et al.
(författare)
-
Heavy metal concentrations in European mosses: 2000/2001 survey
- 2004
-
Ingår i: Journal of Atmospheric Chemistry. - : Springer Science and Business Media LLC. - 0167-7764 .- 1573-0662. ; 49:1-3, s. 425-436
-
Tidskriftsartikel (refereegranskat)abstract
- The heavy metals in mosses survey was originally established in 1980 as a joint Danish-Swedish initiative under the leadership of Angstromke Ruhling, Sweden and has, since then, been repeated at five-yearly intervals with an increasing number of countries and individuals participating. Twenty-eight European countries, almost 7000 sites and about 100 individuals have been involved in the most recent survey in 2000/2001. The survey provides data on concentrations of 10 heavy metals (arsenic, cadmium, chromium, copper, iron, lead, mercury, nickel, vanadium, zinc) in naturally growing mosses throughout Europe. The technique of moss analysis provides a surrogate measure of the spatial patterns of heavy metal deposition from the atmosphere to terrestrial systems, and is easier and cheaper than conventional precipitation analysis. The aims of the survey are to determine patterns of variation in the heavy metal concentration of mosses across Europe, identify the main polluted areas, produce regional maps and further develop the understanding of long-range transboundary pollution. As in previous surveys, there was an east/west decrease in heavy metal concentrations in mosses, related in particular to industrial emissions. Former industrial sites and historic mines accounted for the location of some high concentrations in areas without contemporary industries. Long-range transboundary transport appears to account for elevated concentrations of heavy metals in areas without emission sources, such as lead in southern Scandinavia (presumably from emission sources elsewhere in Europe).
|
|
| 13. |
- Mills, Gina, 1959, et al.
(författare)
-
Ozone pollution will compromise efforts to increase global wheat production
- 2018
-
Ingår i: Global Change Biology. - : Wiley. - 1354-1013 .- 1365-2486. ; 24:8, s. 3560-3574
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction of high-performing crop cultivars and crop/soil water management practices that increase the stomatal uptake of carbon dioxide and photosynthesis will be instrumental in realizing the United Nations Sustainable Development Goal (SDG) of achieving food security. To date, however, global assessments of how to increase crop yield have failed to consider the negative effects of tropospheric ozone, a gaseous pollutant that enters the leaf stomatal pores of plants along with carbon dioxide, and is increasing in concentration globally, particularly in rapidly developing countries. Earlier studies have simply estimated that the largest effects are in the areas with the highest ozone concentrations. Using a modelling method that accounts for the effects of soil moisture deficit and meteorological factors on the stomatal uptake of ozone, we show for the first time that ozone impacts on wheat yield are particularly large in humid rain-fed and irrigated areas of major wheat-producing countries (e.g. United States, France, India, China and Russia). Averaged over 2010-2012, we estimate that ozone reduces wheat yields by a mean 9.9% in the northern hemisphere and 6.2% in the southern hemisphere, corresponding to some 85 Tg (million tonnes) of lost grain. Total production losses in developing countries receiving Official Development Assistance are 50% higher than those in developed countries, potentially reducing the possibility of achieving UN SDG2. Crucially, our analysis shows that ozone could reduce the potential yield benefits of increasing irrigation usage in response to climate change because added irrigation increases the uptake and subsequent negative effects of the pollutant. We show that mitigation of air pollution in a changing climate could play a vital role in achieving the above-mentioned UN SDG, while also contributing to other SDGs related to human health and well-being, ecosystems and climate change.
|
|
| 14. |
- Pandey, Divya, et al.
(författare)
-
Assessing the costs of ozone pollution in India for wheat producers, consumers, and government food welfare policies
- 2023
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - 0027-8424 .- 1091-6490. ; 120:32
-
Tidskriftsartikel (refereegranskat)abstract
- We assess wheat yield losses occurring due to ozone pollution in India and its economic burden on producers, consumers, and the government. Applying an ozone flux-based risk assessment, we show that ambient ozone levels caused a mean 14.18% reduction in wheat yields during 2008 to 2012. Furthermore, irrigated wheat was particularly sensitive to ozone-induced yield losses, indicating that ozone pollution could undermine climate-change adaptation efforts through irrigation expansion. Applying an economic model, we examine the effects of a counterfactual, "pollution-free" scenario on yield losses, wheat prices, consumer and producer welfare, and government costs. We explore three policy scenarios in which the government support farmers at observed levels of either procurement prices (fixed-price), procurement quantities (fixed-procurement), or procurement expenditure (fixed-expenditure). In pollution-free conditions, the fixed-price scenario absorbs the fall in prices, thus increasing producer welfare by USD 2.7 billion, but total welfare decreases by USD 0.24 billion as government costs increase (USD 2.9 billion). In the fixed-procurement and fixed-expenditure scenarios, ozone mitigation allows wheat prices to fall by 38.19 to 42.96%. The producers lose by USD 5.10 to 6.01 billion, but the gains to consumers and governments (USD 8.7 to 10.2 billion) outweigh these losses. These findings show that the government and consumers primarily bear the costs of ozone pollution. For pollution mitigation to optimally benefit wheat production and maximize social welfare, new approaches to support producers other than fixed-price grain procurement may be required. We also emphasize the need to consider air pollution in programs to improve agricultural resilience to climate change.
|
|
