| 1. |
- Aftab, Umair, et al.
(författare)
-
Mixed CoS2@Co3O4 composite material: An efficient nonprecious electrocatalyst for hydrogen evolution reaction
- 2020
-
Ingår i: International journal of hydrogen energy. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0360-3199 .- 1879-3487. ; 45:27, s. 13805-13813
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogen evolution reaction (HER) has been identified as a sustainable and environment friendly technology for a wide range of energy conversion and storage applications. The big barrier in realizing this green technology requires a highly efficient, earth-abundant, and low-cost electrocatalyst for HER. Various HER catalysts have been designed and reported, still, their performance is not up to the mark of Pt. Among them, cobalt-based, especially cobalt disulfide (CoS2) has shown significant HER activity and found suitable candidature for HER due to its low cost, simple to prepare, and exhibits good stability. Herein, we synthesized various nanostructured materials including pure CoS2, Co3O4 and their composites by wet chemical methods and found them active for HER. The scanning electron microscopy (SEM) has revealed a morphology of composite as a mixture of nanowires and round shape spherical nanoparticles with several microns in dimension. The X-ray diffraction (XRD) confirmed the cubic phase of CoS2 and cubic phase of Co3O4 in the composite materials. The chemical deposition of CoS2 onto Co3O4 has tailored the HER activity of CoS2@Co3O4 composite material. Two CoS2@Co3O4 composite materials were produced with varying amounts of Co3O4 and labeled as samples 1 and 2. The Co3O4 reduced the adsorption energy for hydrogen, decreased the aggregation of CoS2 and uplifted the stability of CoS2@Co3O4 a composite material in alkaline media. Sample 1 requires an overpotential of 320 mV to reach a current density of 10 mA/cm(2) and it exhibits a Tafel slope of 42 mVdec(-1) which is the key indicator for the fast HER kinetics on sample 1. The sample 1 is highly durable for 50 h and also it has excellent stability. The electrochemical impedance spectroscopy (EIS) revealed a small charge transfer resistance of 28.81 Ohms for the sample 1 with high capacitance double-layer value of 0.81 mF. EIS has supported polarization and Tafel slope results. Based on the partial physical characterization and the electrochemical results, the as-obtained sample 1 (CoS2@Co3O4 composite material) will find potential applications in an extended range of energy conversion and storage devices owing to its low cost, high abundance, and excellent efficiency. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
|
|
| 2. |
- Aftab, Umair, et al.
(författare)
-
Nickel-cobalt bimetallic sulfide NiCo(2)S(4)nanostructures for a robust hydrogen evolution reaction in acidic media
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:37, s. 22196-22203
-
Tidskriftsartikel (refereegranskat)abstract
- There are many challenges associated with the fabrication of efficient, inexpensive, durable and very stable nonprecious metal catalysts for the hydrogen evolution reaction (HER). In this study, we have designed a facile strategy by tailoring the concentration of precursors to successfully obtain nickel-cobalt bimetallic sulfide (NiCo2S4) using a simple hydrothermal method. The morphology of the newly prepared NiCo(2)S(4)comprised a mixture of microparticles and nanorods, which were few microns in dimension. The crystallinity of the composite sample was found to be excellent with a cubic phase. The sample that contained a higher amount of cobalt compared to nickel and produced single-phase NiCo(2)S(4)exhibited considerably improved HER performance. The variation in the salt precursor concentration during the synthesis of a material is a simple methodology to produce a scalable platinum-free catalyst for HER. The advantageous features of the multiple active sites of cobalt in the CN-21 sample as compared to that for pristine CoS and NiS laid the foundation for the provision of abundant active edges for HER. The composite sample produced a current density of 10 mA cm(-2)at an overpotential of 345 mV. Also, it exhibited a Tafel value of 60 mV dec(-1), which predominantly ensured rapid charge transfer kinetics during HER. CN-21 was highly durable and stable for 30 hours. Electrochemical impedance spectroscopy showed that the charge transfer resistance was 21.88 ohms, which further validated the HER polarization curves and Tafel results. CN-21 exhibited a double layer capacitance of 4.69 mu F cm(-2)and a significant electrochemically active surface area of 134.0 cm(2), which again supported the robust efficiency for HER. The obtained results reveal that our developed NiCo(2)S(4)catalyst has a high density of active edges, and it is a non-noble metal catalyst for the hydrogen evolution reaction. The present findings provide an alternative strategy and an active nonprecious material for the development of energy-related applications.
|
|
| 3. |
- Aftab, Umair, et al.
(författare)
-
The chemically reduced CuO-Co3O4 composite as a highly efficient electrocatalyst for oxygen evolution reaction in alkaline media
- 2019
-
Ingår i: Catalysis Science & Technology. - : ROYAL SOC CHEMISTRY. - 2044-4753 .- 2044-4761. ; 9:22, s. 6274-6284
-
Tidskriftsartikel (refereegranskat)abstract
- The fabrication of efficient, alkaline-stable and nonprecious electrocatalysts for the oxygen evolution reaction is highly needed; however, it is a challenging task. Herein, we report a noble metal-free advanced catalyst, i.e. the chemically reduced mixed transition metal oxide CuO-Co3O4 composite, with outstanding oxygen evolution reaction activity in alkaline media. Sodium borohydride (NaBH4) was used as a reducing agent for the mixed transition metal oxide CuO-Co3O4. The chemically reduced composite carried mixed valence states of Cu and Co, which played a dynamic role in driving an excellent oxygen evolution reaction process. The X-ray photo-electron spectroscopy (XPS) study confirmed high density of active sites in the treated sample with a large number of oxygen vacancies. The developed electrocatalyst showed the lowest overpotential of 144.5 mV vs. the reversible hydrogen electrode (RHE) to achieve the current density of 40 mA cm(-2) and remained stable for 40 hours throughout the chronoamperometry test at the constant potential of 1.39 V vs. RHE. Moreover, the chemically reduced composite was highly durable. Electrochemical impedance spectroscopy (EIS) confirmed the low charge transfer resistance of 13.53 ohms for the chemically reduced composite, which was 50 and 26 times smaller than that of Co3O4 and untreated CuO-Co3O4, respectively. The electrochemically active surface area for the chemically reduced composite was found to be greater than that for pristine CuO, Co3O4 and untreated pristine CuO-Co3O4. These findings reveal the possibility of a new gateway for the capitalization of a chemically reduced sample into diverse energy storage and conversion systems such as lithium-ion batteries and supercapacitors.
|
|
| 4. |
- Aftab, Umair, et al.
(författare)
-
Two step synthesis of TiO2–Co3O4 composite for efficient oxygen evolution reaction
- 2021
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 46:13, s. 9110-9122
-
Tidskriftsartikel (refereegranskat)abstract
- For an active hydrogen gas generation through water dissociation, the sluggish oxygen evolution reaction (OER) kinetics due to large overpotential is a main hindrance. Herein, a simple approach is used to produce composite material based on TiO2/Co3O4 for efficient OER and overpotential is linearly reduced with increasing amount of TiO2. The scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) investigations reveal the wire like morphology of composite materials, formed by the self-assembly of nanoparticles. The titania nanoparticles were homogenously distributed on the larger Co3O4 nanoparticles. The powder x-ray diffraction revealed a tetragonal phase of TiO2 and the cubic phase of Co3O4 in the composite materials. Composite samples with increasing TiO2 content were obtained (18%, 33%, 41% and 65% wt.). Among the composites, cobalt oxide-titanium oxide with the highest TiO2 content (CT-20) possesses the lowest overpotential for OER with a Tafel slope of 60 mV dec−1 and an exchange current density of 2.98 × 10−3A/cm2. The CT-20 is highly durable for 45 h at different current densities of 10, 20 and 30 mA/cm2. Electrochemical impedance spectroscopy (EIS) confirmed the fast charge transport for the CT-20 sample, which potentially accelerated the OER kinetics. These results based on a two-step methodology for the synthesis of TiO2/Co3O4 material can be useful and interesting for various energy storage and energy conversion systems.
|
|
