| 1. |
|
|
| 2. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 3. |
- Zhang, S. N., et al.
(författare)
-
The high energy cosmic-radiation detection (HERD) facility onboard China's Space Station
- 2014
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 9780819496126
-
Konferensbidrag (refereegranskat)abstract
- The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads of the cosmic lighthouse program onboard China's Space Station, which is planned for operation starting around 2020 for about 10 years. The main scientific objectives of HERD are indirect dark matter search, precise cosmic ray spectrum and composition measurements up to the knee energy, and high energy gamma-ray monitoring and survey. HERD is composed of a 3-D cubic calorimeter (CALO) surrounded by microstrip silicon trackers (STKs) from five sides except the bottom. CALO is made of about 104 cubes of LYSO crystals, corresponding to about 55 radiation lengths and 3 nuclear interaction lengths, respectively. The top STK microstrips of seven X-Y layers are sandwiched with tungsten converters to make precise directional measurements of incoming electrons and gamma-rays. In the baseline design, each of the four side SKTs is made of only three layers microstrips. All STKs will also be used for measuring the charge and incoming directions of cosmic rays, as well as identifying back scattered tracks. With this design, HERD can achieve the following performance: energy resolution of 1% for electrons and gamma-rays beyond 100 GeV, 20% for protons from 100 GeV to 1 PeV; electron/proton separation power better than 10-5; effective geometrical factors of >3 m2sr for electron and diffuse gamma-rays, >2 m2sr for cosmic ray nuclei. R and D is under way for reading out the LYSO signals with optical fiber coupled to image intensified CCD and the prototype of one layer of CALO.
|
|
| 4. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 5. |
- Cai, Yunhao, et al.
(författare)
-
Effect of the Energy Offset on the Charge Dynamics in Nonfullerene Organic Solar Cells
- 2020
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 12:39, s. 43984-43991
-
Tidskriftsartikel (refereegranskat)abstract
- The energy offset, considered as the driving force for charge transfer between organic molecules, has significant effects on both charge separation and charge recombination in organic solar cells. Herein, we designed material systems with gradually shifting energy offsets, including both positive and negative values. Time-resolved spectroscopy was used to monitor the charge dynamics within the bulk heterojunction. It is striking to find that there is still charge transfer and charge generation when the energy offset reached -0.10 eV (ultraviolet photoelectron spectroscopy data). This work not only indicates the feasibility of the free carrier generation and the following charge separation under the condition of a negative offset but also elucidates the relationship between the charge transfer and the energy offset in the case of polymer chlorination.
|
|
| 6. |
|
|
| 7. |
- Luo, Yifei, et al.
(författare)
-
Technology Roadmap for Flexible Sensors
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Forskningsöversikt (refereegranskat)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
| 8. |
- Yan, Zhibo, et al.
(författare)
-
Reversible Ionic Polarization in Metal Halide Perovskites
- 2021
-
Ingår i: The Journal of Physical Chemistry C. - : AMER CHEMICAL SOC. - 1932-7447 .- 1932-7455. ; 125:1, s. 283-289
-
Tidskriftsartikel (refereegranskat)abstract
- Metal halide perovskites have emerged as promising photovoltaic materials with attractive photoelectronic properties. However, the fundamental mechanisms for their outstanding properties are still elusive. In this work, we reveal the reversible bulk ionic polarization property of perovskites through studying the photoelectric response on the controllable states by electrical poling from room temperature to low temperature (200 K). The overall increase in light absorption, photoconductance, and carrier recombination lifetime demonstrates that the bulk ionic polarization contributes to the excellent photoelectric properties of halide perovskites. Moreover, we also discuss the role of ionic polarization in the overshoot transient photocurrent relaxation phenomenon after the electrical poling. This work would promote deep understanding in the unique properties of perovskites and their excellent photovoltaic performance.
|
|
| 9. |
- Zhang, S. -N, et al.
(författare)
-
Introduction to the high energy cosmic-radiation detection (HERD) facility onboard China's future space station
- 2017
-
Ingår i: Proceedings of Science. - : Sissa Medialab Srl.
-
Konferensbidrag (refereegranskat)abstract
- The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads onboard China's Space Station, which is planned for operation starting around 2025 for about 10 years. The main scientific objectives of HERD are searching for signals of dark matter annihilation products, precise cosmic electron (plus positron) spectrum and anisotropy measurements up to 10 TeV, precise cosmic ray spectrum and composition measurements up to the knee energy, and high energy gamma-ray monitoring and survey. HERD is composed of a 3-D cubic calorimeter (CALO) surrounded by microstrip silicon trackers (STKs) from five sides except the bottom. CALO is made of about 7,500 cubes of LYSO crystals, corresponding to about 55 radiation lengths and 3 nuclear interaction lengths, respectively. The top STK microstrips of six X-Y layers are sandwiched with tungsten converters to make precise directional measurements of incoming electrons and gamma-rays. In the baseline design, each of the four side STKs is made of only three layers microstrips. All STKs will also be used for measuring the charge and incoming directions of cosmic rays, as well as identifying back scattered tracks. With this design, HERD can achieve the following performance: energy resolution of 1% for electrons and gamma-rays beyond 100 GeV and 20% for protons from 100 GeV to 1 PeV; electron/proton separation power better than 10-5; effective geometrical factors of >3 m2sr for electron and diffuse gamma-rays, >2 m2sr for cosmic ray nuclei. R&D is under way for reading out the LYSO signals with optical fiber coupled to image intensified IsCMOS and CALO prototype of 250 LYSO crystals.
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
- Argillander, Joakim, et al.
(författare)
-
Quantum random number generation based on a perovskite light emitting diode
- 2023
-
Ingår i: Communications Physics. - : NATURE PORTFOLIO. - 2399-3650. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- True random number generation is not thought to be possible using a classical approach but by instead exploiting quantum mechanics genuine randomness can be achieved. Here, the authors demonstrate a certified quantum random number generation using a metal-halide perovskite light emitting diode as a source of weak coherent polarisation states randomly producing an output of either 0 or 1. The recent development of perovskite light emitting diodes (PeLEDs) has the potential to revolutionize the fields of optical communication and lighting devices, due to their simplicity of fabrication and outstanding optical properties. Here we demonstrate that PeLEDs can also be used in the field of quantum technologies by implementing a highly-secure quantum random number generator (QRNG). Modern QRNGs that certify their privacy are posed to replace classical random number generators in applications such as encryption and gambling, and therefore need to be cheap, fast and with integration capabilities. Using a compact metal-halide PeLED source, we generate random numbers, which are certified to be secure against an eavesdropper, following the quantum measurement-device-independent scenario. The obtained generation rate of more than 10 Mbit s(-1), which is already comparable to commercial devices, shows that PeLEDs can work as high-quality light sources for quantum information tasks, thus opening up future applications in quantum technologies.
|
|
| 14. |
- Argillander, Joakim, et al.
(författare)
-
Secure quantum random number generation with perovskite photonics
- 2024
-
Ingår i: QUANTUM COMPUTING, COMMUNICATION, AND SIMULATION IV. - : SPIE-INT SOC OPTICAL ENGINEERING. - 9781510670839 - 9781510670822
-
Konferensbidrag (refereegranskat)abstract
- In the field of cryptography, it is crucial that the random numbers used in key generation are not only genuinely random but also private, meaning that no other party than the legitimate user must have information about the numbers generated. Quantum random number generators can offer both properties - fundamentally random output, as well as the ability to implement generators that can certify the amount of private randomness generated, in order to remove some side-channel attacks. In this study we introduce perovskite technology as a resilient platform for photonics, where the resilience is owed to perovskite's ease of manufacturing. This has the potential to mitigate disruptions in the supply chain by enabling local and domestic manufacturing of photonic devices. We demonstrate the feasibility of the platform by implementing a measurement-device independent quantum random number generator based on perovskite LEDs.
|
|
| 15. |
- Ariyawansa, Hiran A., et al.
(författare)
-
Fungal diversity notes 111–252—taxonomic and phylogenetic contributions to fungal taxa
- 2015
-
Ingår i: Fungal diversity. - : Springer Science and Business Media LLC. - 1560-2745 .- 1878-9129. ; 75, s. 27-274
-
Tidskriftsartikel (refereegranskat)abstract
- This paper is a compilation of notes on 142 fungal taxa, including five new families, 20 new genera, and 100 new species, representing a wide taxonomic and geographic range. The new families, Ascocylindricaceae, Caryosporaceae and Wicklowiaceae (Ascomycota) are introduced based on their distinct lineages and unique morphology. The new Dothideomycete genera Pseudomassariosphaeria (Amniculicolaceae), Heracleicola, Neodidymella and P s e u d o m i c ros p h a e r i o p s i s ( D id y m e l l a c e a e ) , P s e u d o p i t h o m y c e s ( D i d y m o s p h a e r i a c e a e ) , Brunneoclavispora, Neolophiostoma and Sulcosporium (Halotthiaceae), Lophiohelichrysum (Lophiostomataceae), G a l l i i c o l a , Popul o c re s c e n t i a a nd Va g i c o l a (Phaeosphaeriaceae), Ascocylindrica (Ascocylindricaceae), E l o n g a t o p e d i c e l l a t a ( R o u s s o e l l a c e a e ) , Pseudoasteromassaria (Latoruaceae) and Pseudomonodictys (Macrodiplodiopsidaceae) are introduced. The newly described species of Dothideomycetes (Ascomycota) are Pseudomassariosphaeria bromicola (Amniculicolaceae), Flammeascoma lignicola (Anteagloniaceae), Ascocylindrica marina (Ascocylindricaceae) , Lembosia xyliae (Asterinaceae), Diplodia crataegicola and Diplodia galiicola ( B o t r yosphae r i a cea e ) , Caryospor a aquat i c a (Caryosporaceae), Heracleicola premilcurensis and Neodi dymell a thai landi cum (Didymellaceae) , Pseudopithomyces palmicola (Didymosphaeriaceae), Floricola viticola (Floricolaceae), Brunneoclavispora bambusae, Neolophiostoma pigmentatum and Sulcosporium thailandica (Halotthiaceae), Pseudoasteromassaria fagi (Latoruaceae), Keissleriella dactylidicola (Lentitheciaceae), Lophiohelichrysum helichrysi (Lophiostomataceae), Aquasubmersa japonica (Lophiotremataceae) , Pseudomonodictys tectonae (Macrodiplodiopsidaceae), Microthyrium buxicola and Tumidispora shoreae (Microthyriaceae), Alloleptosphaeria clematidis, Allophaeosphaer i a c y t i s i , Allophaeosphae r i a subcylindrospora, Dematiopleospora luzulae, Entodesmium artemisiae, Galiicola pseudophaeosphaeria, Loratospora(Basidiomycota) are introduced together with a new genus Neoantrodiella (Neoantrodiellaceae), here based on both morphology coupled with molecular data. In the class Agaricomycetes, Agaricus pseudolangei, Agaricus haematinus, Agaricus atrodiscus and Agaricus exilissimus (Agaricaceae) , Amanita m e l l e i a l b a , Amanita pseudosychnopyramis and Amanita subparvipantherina (Amanitaceae), Entoloma calabrum, Cora barbulata, Dictyonema gomezianum and Inocybe granulosa (Inocybaceae), Xerocomellus sarnarii (Boletaceae), Cantharellus eucalyptorum, Cantharellus nigrescens, Cantharellus tricolor and Cantharellus variabilicolor (Cantharellaceae), Cortinarius alboamarescens, Cortinarius brunneoalbus, Cortinarius ochroamarus, Cortinarius putorius and Cortinarius seidlii (Cortinariaceae), Hymenochaete micropora and Hymenochaete subporioides (Hymenochaetaceae), Xylodon ramicida (Schizoporaceae), Colospora andalasii (Polyporaceae), Russula guangxiensis and Russula hakkae (Russulaceae), Tremella dirinariae, Tremella graphidis and Tremella pyrenulae (Tremellaceae) are introduced. Four new combinations Neoantrodiella gypsea, Neoantrodiella thujae (Neoantrodiellaceae), Punctulariopsis cremeoalbida, Punctulariopsis efibulata (Punctulariaceae) are also introduced here for the division Basidiomycota. Furthermore Absidia caatinguensis, Absidia koreana and Gongronella koreana (Cunninghamellaceae), Mortierella pisiformis and Mortierella formosana (Mortierellaceae) are newly introduced in the Zygomycota, while Neocallimastix cameroonii and Piromyces irregularis (Neocallimastigaceae) ar e i n t roduced i n the Neocallimastigomycota. Reference specimens or changes in classification and notes are provided for Alternaria ethzedia, Cucurbitaria ephedricola, Austropleospora, Austropleospora archidendri, Byssosphaeria rhodomphala, Lophiostoma caulium, Pseudopithomyces maydicus, Massariosphaeria, Neomassariosphaeria and Pestalotiopsis montellica.
|
|
| 16. |
- Bao, Chunxiong, et al.
(författare)
-
A multifunctional display based on photo-responsive perovskite light-emitting diodes
- 2024
-
Ingår i: NATURE ELECTRONICS. - : NATURE PORTFOLIO. - 2520-1131.
-
Tidskriftsartikel (refereegranskat)abstract
- Current display screens are typically only used for information display, but can have a range of different sensors integrated into them for functions such as touch control, ambient light sensing and fingerprint sensing. Photo-responsive light-emitting diodes (LEDs), which can display information and respond to light excitation, could be used to develop future ultra-thin and large screen-to-body ratio screens. However, photo-response is difficult to achieve with conventional display technologies. Here, we report a multifunctional display that uses photo-responsive metal halide perovskite LEDs as pixels. The perovskite LED display can be simultaneously used as a touch screen, ambient light sensor and image sensor (including for fingerprint drawing) without integrating any additional sensors. The light-to-electricity conversion efficiency of the pixels also allow the display to act as a photovoltaic device that can charge the equipment. Photo-responsive metal halide perovskite light-emitting diodes can be used to create a multifunctional display that can function as a touch screen, ambient light sensor and image sensor.
|
|
| 17. |
- Bao, Chunxiong, et al.
(författare)
-
Bidirectional optical signal transmission between two identical devices using perovskite diodes
- 2020
-
Ingår i: NATURE ELECTRONICS. - : NATURE PUBLISHING GROUP. - 2520-1131. ; 3:3, s. 156-164
-
Tidskriftsartikel (refereegranskat)abstract
- A solution-processed perovskite diode that functions as both optical transmitter and receiver can be used to build a monolithic pulse sensor and a bidirectional optical communication system. The integration of optical signal generation and reception into one device-thus allowing a bidirectional optical signal transmission between two identical devices-is of value in the development of miniaturized and integrated optoelectronic devices. However, conventional solution-processable semiconductors have intrinsic material and design limitations that prevent them from being used to create such devices with a high performance. Here we report an efficient solution-processed perovskite diode that is capable of working in both emission and detection modes. The device can be switched between modes by changing the bias direction, and it exhibits light emission with an external quantum efficiency of over 21% and a light detection limit on a subpicowatt scale. The operation speed for both functions can reach tens of megahertz. Benefiting from the small Stokes shift of perovskites, our diodes exhibit a high specific detectivity (more than 2 x 10(12) Jones) at its peak emission (~804 nm), which allows an optical signal exchange between two identical diodes. To illustrate the potential of the dual-functional diode, we show that it can be used to create a monolithic pulse sensor and a bidirectional optical communication system.
|
|
| 18. |
- Bao, Chunxiong, et al.
(författare)
-
High Performance and Stable All-Inorganic Metal Halide Perovskite-Based Photodetectors for Optical Communication Applications
- 2018
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 30:38
-
Tidskriftsartikel (refereegranskat)abstract
- Photodetectors are critical parts of an optical communication system for achieving efficient photoelectronic conversion of signals, and the response speed directly determines the bandwidth of the whole system. Metal halide perovskites, an emerging class of low-cost solution-processed semiconductors, exhibiting strong optical absorption, low trap states, and high carrier mobility, are widely investigated in photodetection applications. Herein, through optimizing the device engineering and film quality, high-performance photodetectors based on all-inorganic cesium lead halide perovskite (CsPbIxBr3-x), which simultaneously possess high sensitivity and fast response, are demonstrated. The optimized devices processed from CsPbIBr2 perovskite show a practically measured detectable limit of about 21.5 pW cm(-2) and a fast response time of 20 ns, which are both among the highest reported device performance of perovskite-based photodetectors. Moreover, the photodetectors exhibit outstanding long-term environmental stability, with negligible degradation of the photoresponse property after 2000 h under ambient conditions. In addition, the resulting perovskite photodetector is successfully integrated into an optical communication system and its applications as an optical signal receiver on transmitting text and audio signals is demonstrated. The results suggest that all-inorganic metal halide perovskite-based photodetectors have great application potential for optical communication.
|
|
| 19. |
- Bao, Chunxiong, et al.
(författare)
-
Physics of defects in metal halide perovskites
- 2022
-
Ingår i: Reports on progress in physics (Print). - : IOP Publishing Ltd. - 0034-4885 .- 1361-6633. ; 85:9
-
Forskningsöversikt (refereegranskat)abstract
- Metal halide perovskites are widely used in optoelectronic devices, including solar cells, photodetectors, and light-emitting diodes. Defects in this class of low-temperature solution-processed semiconductors play significant roles in the optoelectronic properties and performance of devices based on these semiconductors. Investigating the defect properties provides not only insight into the origin of the outstanding performance of perovskite optoelectronic devices but also guidance for further improvement of performance. Defects in perovskites have been intensely studied. Here, we review the progress in defect-related physics and techniques for perovskites. We survey the theoretical and computational results of the origin and properties of defects in perovskites. The underlying mechanisms, functions, advantages, and limitations of trap state characterization techniques are discussed. We introduce the effect of defects on the performance of perovskite optoelectronic devices, followed by a discussion of the mechanism of defect treatment. Finally, we summarize and present key challenges and opportunities of defects and their role in the further development of perovskite optoelectronic devices.
|
|
| 20. |
- Bao, Ningzhong, et al.
(författare)
-
Thermodynamic modeling and experimental verification for ion-exchange synthesis of K2O·6TiO2 and TiO2 fibers from K2O·4TiO2
- 2002
-
Ingår i: Fluid Phase Equilibria. - 0378-3812 .- 1879-0224. ; 193, s. 229-243
-
Tidskriftsartikel (refereegranskat)abstract
- A thermodynamic model was established to determine ion-exchange conditions for the synthesis of potassium hexatitanate (K2O·6TiO2) and titanium dioxide (TiO2) from potassium tetratitanate (K2O·4TiO2) fiber. In the proposed model equilibrium species in the solid phase and corresponding ion-exchange equilibrium constants at 298.15 K were determined from the experimental data of Sasaki et al. [Inorg. Chem. 24 (1985) 2265]. In order to verify the proposed model, prediction results were compared with experimental data determined in literature and those measured in this work. The comparison shows a good agreement. Based on this, the proposed model was also used to predict more extensive suitable conditions for the synthesis of K2O·6TiO2 and TiO2.
|
|
| 21. |
- Bao, Qinye, et al.
(författare)
-
Effects of ultraviolet soaking on surface electronic structures of solution processed ZnO nanoparticle films in polymer solar cells
- 2014
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488. ; 2:41, s. 17676-17682
-
Tidskriftsartikel (refereegranskat)abstract
- We systematically show the effect of UV-light soaking on surface electronic structures and chemical states of solution processed ZnO nanoparticle (ZnONP) films in UHV, dry air and UV-ozone. UV exposure in UHV induces a slight decrease in work function and surface-desorption of chemisorbed oxygen, whereas UV exposure in the presence of oxygen causes an increase in work function due to oxygen atom vacancy filling in the ZnO matrix. We demonstrate that UV-light soaking in combination with vacuum or oxygen can tune the work function of the ZnONP films over a range exceeding 1 eV. Based on photovoltaic performance and diode measurements, we conclude that the oxygen atom vacancy filling occurs mainly at the surface of the ZnONP films and that the films consequently retain their n-type behavior despite a significant increase in the measured work function.
|
|
| 22. |
|
|
| 23. |
- Bao, Qinye, et al.
(författare)
-
Regular Energetics at Conjugated Electrolyte/Electrode Modifier for Organic Electronics and Their Implications of Design Rules
- 2015
-
Ingår i: Advanced Materials Interfaces. - : John Wiley & Sons. - 2196-7350. ; 2:12, s. 1-6
-
Tidskriftsartikel (refereegranskat)abstract
- Regular energetics at a conjugated electrolyte/electrode modifier are found and controlled by equilibration of the Fermi level and an additional interface double dipole step induced by ionic functionality. Based on the results, design rules for conjugated electrolyte/electrode modifiers to achieve the smallest charge injection/exaction barrier and break through the current thickness limitation are proposed.
|
|
| 24. |
- Cheng, Shi-Ping, et al.
(författare)
-
Haplotype-resolved genome assembly and allele-specific gene expression in cultivated ginger
- 2021
-
Ingår i: Horticulture Research. - : Springer Nature. - 2052-7276. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- Ginger (Zingiber officinale) is one of the most valued spice plants worldwide; it is prized for its culinary and folk medicinal applications and is therefore of high economic and cultural importance. Here, we present a haplotype-resolved, chromosome-scale assembly for diploid ginger anchored to 11 pseudochromosome pairs with a total length of 3.1 Gb. Remarkable structural variation was identified between haplotypes, and two inversions larger than 15 Mb on chromosome 4 may be associated with ginger infertility. We performed a comprehensive, spatiotemporal, genome-wide analysis of allelic expression patterns, revealing that most alleles are coordinately expressed. The alleles that exhibited the largest differences in expression showed closer proximity to transposable elements, greater coding sequence divergence, more relaxed selection pressure, and more transcription factor binding site differences. We also predicted the transcription factors potentially regulating 6-gingerol biosynthesis. Our allele-aware assembly provides a powerful platform for future functional genomics, molecular breeding, and genome editing in ginger.
|
|
| 25. |
- Feng, Dawei, et al.
(författare)
-
Robust and conductive two-dimensional metal-organic frameworks with exceptionally high volumetric and areal capacitance
- 2018
-
Ingår i: Nature Energy. - : Springer Science and Business Media LLC. - 2058-7546. ; 3:1, s. 30-36
-
Tidskriftsartikel (refereegranskat)abstract
- For miniaturized capacitive energy storage, volumetric and areal capacitances are more important metrics than gravimetric ones because of the constraints imposed by device volume and chip area. Typically used in commercial supercapacitors, porous carbons, although they provide a stable and reliable performance, lack volumetric performance because of their inherently low density and moderate capacitances. Here we report a high-performing electrode based on conductive hexaaminobenzene (HAB)-derived two-dimensional metal-organic frameworks (MOFs). In addition to possessing a high packing density and hierarchical porous structure, these MOFs also exhibit excellent chemical stability in both acidic and basic aqueous solutions, which is in sharp contrast to conventional MOFs. Submillimetre-thick pellets of HAB MOFs showed high volumetric capacitances up to 760 F cm(-3) and high areal capacitances over 20 F cm(-2). Furthermore, the HAB MOF electrodes exhibited highly reversible redox behaviours and good cycling stability with a capacitance retention of 90% after 12,000 cycles. These promising results demonstrate the potential of using redox-active conductive MOFs in energy-storage applications.
|
|
| 26. |
- Feng, Meng-Yao, et al.
(författare)
-
Work-Related Stress and Occurrence of Cardiovascular Disease A 13-Year Prospective Study
- 2022
-
Ingår i: Journal of Occupational and Environmental Medicine. - 1076-2752 .- 1536-5948. ; 64:11, s. 927-933
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: The aim of the study is to investigate the influence of work-related psychological and physical stresses on risk of cardiovascular disease (CVD). Methods : A total of 5651 CVD-free participants older than 50 years from the Survey of Health, Ageing and Retirement in Europe were followed up for 13 years to detect incident CVD. Work-related stress was assessed using job strain and job reward questionnaire. Cox regression model was used to estimate the association. Results: High physical demands (hazard ratio [HR], 1.30) and low reward (HR, 1.19) compared with their counterparts, as well as active physical jobs (HR, 1.41) and high physical strain (HR, 1.45) in comparison with low physical strain were associated with higher risk of incident CVD after adjusting for confounders. However, combining physically stressful jobs with low reward did not further increase the CVD risk. Conclusions: Avoiding physically stressful jobs or providing appropriate reward may reduce the occurrence of CVD.
|
|
| 27. |
- Guo, Ruiqi, et al.
(författare)
-
Double Active Layers Constructed with Halide Perovskite and Quantum Dots for Broadband Photodetection
- 2020
-
Ingår i: Advanced Optical Materials. - : WILEY-V C H VERLAG GMBH. - 2162-7568 .- 2195-1071. ; 8:17
-
Tidskriftsartikel (refereegranskat)abstract
- Herein, solution-processed, high-performance broadband (300-1100 nm) photodetectors based on double active layers incorporating narrow-bandgap CuInSe2 (CISe) quantum dots (QDs) and halide perovskite are devised. The CISe QDs/perovskite film as the photoactive layer boosts the photocurrent and suppresses dark current. Due to the joint light absorption effect of CISe QDs and halide perovskite, the photoelectric conversion capacity is improved. Furthermore, CISe QDs as an electron-blocking layer can effectively block electrons to the hole transport layer and reduce the thermal noise. The optimized photodetector exhibits responsivity over 150 mA W-1 in the visible and more than 20 mA W-1 in the near-infrared (800-1000 nm) ranges, specific detectivity of more than 7.0 x 10(12) Jones in the visible region and 7.7 x 10(11) Jones in the near-infrared region, a transient response time of 277 ns with the active area of 0.013 cm(2), and a linear dynamic range of approximate to 75 dB. Importantly, the CISe QDs layer makes the perovskite denser and more hydrophobic, thus improves the environmental and thermal stability of the detector, even extends the working temperature to exceeding 150 degrees C. The design concept and the considerable performance of this novel device provide a reference value for polychromatic light detection.
|
|
| 28. |
- Guo, Xuewen, et al.
(författare)
-
Understanding the effect of N2200 on performance of J71 : ITIC bulk heterojunction in ternary non-fullerene solar cells
- 2019
-
Ingår i: Organic electronics. - : Elsevier. - 1566-1199 .- 1878-5530. ; 71, s. 65-71
-
Tidskriftsartikel (refereegranskat)abstract
- None-fullerene solar cells with ternary architecture have attracted much attention because it is an effective approach for boosting the device power conversion efficiency. Here, the crystalline polymer N2200 as the third component is integrated into J71: ITIC bulk heterojunction. A series of characterizations indicate that N2200 could increase photo-harvesting, balanced hole and electron mobilities, enhanced exciton dissociation, and suppressed charge recombination, which result in the comprehensive improvement of open circuit voltage, short circuit current and fill factor in the device. Moreover, after introduction of N2200, the morphology of the ternary active layer is optimized, and the film crystallinity is improved. This work demonstrates that adding a small quantity of high crystallization acceptor into non-fullerene donor: acceptor mixture is a promising strategy toward developing high-performance organic solar cells.
|
|
| 29. |
|
|
| 30. |
- Han, Ning, et al.
(författare)
-
Lowering the kinetic barrier via enhancing electrophilicity of surface oxygen to boost acidic oxygen evolution reaction
- 2024
-
Ingår i: Matter. - 2590-2393 .- 2590-2385. ; 7:3, s. 1330-1343
-
Tidskriftsartikel (refereegranskat)abstract
- The acidic oxygen evolution reaction (OER) is essential for many renewable energy conversion and storage technologies. However, the high energy required to break the strong covalent O-H bond of H2O in acidic media results in sluggish OER kinetics. Here, we report the critical role of iron in a new family of iron-containing yttrium ruthenate (Y2-xFexRu2O7-δ) electrocatalysts in highly increasing the electrophilicity of surface oxygen, leading to a significant reduction of the kinetics barrier by 33%, thus an exceptional OER mass activity of 1,021 A· up to 12.4 and 7.7 times that of Y2Ru2O7-δ and RuO2, respectively. Introducing iron reduces the Mulliken atomic charge on the O sites in the generated Ru-O-Fe structure, thereby facilitating the acid-base nucleophilic assault from H2O and reducing the free energy on the rate-determining step of OER. This work provides an effective strategy to reduce the kinetics barrier to achieve highly efficient and economic OER in acidic conditions.
|
|
| 31. |
- He, Ming, et al.
(författare)
-
A controllable approach for the synthesis of titanate derivatives of potassium tetratitanate fiber
- 2004
-
Ingår i: Journal of Materials Science. - 0022-2461 .- 1573-4803. ; 39, s. 3745-3750
-
Tidskriftsartikel (refereegranskat)abstract
- Three types titanate derivatives, K2Ti6O13 fiber, K2Ti8O17 fiber and anatase TiO2 fiber, were synthesized by ion-exchange reaction from potassium tetratitanate fiber (K2Ti4O9) based on the hydrate conditions predicted by a thermodynamic model. These products were formed by a heat treatment of the corresponding hydrate intermediates K1.33H0.67Ti4O9·H2O, KHTi4O9·0.5H2O and H2Ti4O9·1.2H2O which were quantitatively obtained by controlling the pH value and the equilibrium concentration of potassium ion. The mole ratio of Ti/K in solid phase (R) of the target products was taken as the controlling aim in the hydrate process. The temperature for heat treatment of hydrate intermediates was determined by thermogravimetry (TG) and differential scanning calorimetry (DSC). All products retained fibrous morphology similar to that of K2Ti4O9 used as the starting material.
|
|
| 32. |
- Hudson, Lawrence N, et al.
(författare)
-
The database of the PREDICTS (Projecting Responses of Ecological Diversity In Changing Terrestrial Systems) project
- 2017
-
Ingår i: Ecology and Evolution. - : John Wiley & Sons. - 2045-7758. ; 7:1, s. 145-188
-
Tidskriftsartikel (refereegranskat)abstract
- The PREDICTS project-Projecting Responses of Ecological Diversity In Changing Terrestrial Systems (www.predicts.org.uk)-has collated from published studies a large, reasonably representative database of comparable samples of biodiversity from multiple sites that differ in the nature or intensity of human impacts relating to land use. We have used this evidence base to develop global and regional statistical models of how local biodiversity responds to these measures. We describe and make freely available this 2016 release of the database, containing more than 3.2 million records sampled at over 26,000 locations and representing over 47,000 species. We outline how the database can help in answering a range of questions in ecology and conservation biology. To our knowledge, this is the largest and most geographically and taxonomically representative database of spatial comparisons of biodiversity that has been collated to date; it will be useful to researchers and international efforts wishing to model and understand the global status of biodiversity.
|
|
| 33. |
- Jia, Kai-Hua, et al.
(författare)
-
Chromosome-scale assembly and evolution of the tetraploid Salvia splendens (Lamiaceae) genome
- 2021
-
Ingår i: Horticulture Research. - : Oxford University Press (OUP). - 2052-7276 .- 2662-6810. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- Polyploidization plays a key role in plant evolution, but the forces driving the fate of homoeologs in polyploid genomes, i.e., paralogs resulting from a whole-genome duplication (WGD) event, remain to be elucidated. Here, we present a chromosome-scale genome assembly of tetraploid scarlet sage (Salvia splendens), one of the most diverse ornamental plants. We found evidence for three WGD events following an older WGD event shared by most eudicots (the γ event). A comprehensive, spatiotemporal, genome-wide analysis of homoeologs from the most recent WGD unveiled expression asymmetries, which could be associated with genomic rearrangements, transposable element proximity discrepancies, coding sequence variation, selection pressure, and transcription factor binding site differences. The observed differences between homoeologs may reflect the first step toward sub- and/or neofunctionalization. This assembly provides a powerful tool for understanding WGD and gene and genome evolution and is useful in developing functional genomics and genetic engineering strategies for scarlet sage and other Lamiaceae species.
|
|
| 34. |
- Jiang, Jizhong, et al.
(författare)
-
Synergistic strain engineering of perovskite single crystals for highly stable and sensitive X-ray detectors with low-bias imaging and monitoring
- 2022
-
Ingår i: Nature Photonics. - : Nature Portfolio. - 1749-4885 .- 1749-4893. ; 16:8, s. 575-581
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray detectors based on dual-site-doped perovskite single crystals exhibit excellent sensitivity of 2.6 x 10(4) mu C Gy(air)(-1) cm(-2) under a low field of 1 V cm(-1). The detectable dose rate is as low as 7.09 nGy(air) s(-1). The operational stability is beyond half a year. Although three-dimensional metal halide perovskite (ABX(3)) single crystals are promising next-generation materials for radiation detection, state-of-the-art perovskite X-ray detectors include methylammonium as A-site cations, limiting the operational stability. Previous efforts to improve the stability using formamidinium-caesium-alloyed A-site cations usually sacrifice the detection performance because of high trap densities. Here we successfully solve this trade-off between stability and detection performance by synergistic composition engineering, where we include A-site alloys to decrease the trap density and B-site dopants to release the microstrain induced by A-site alloying. As such, we develop high-performance perovskite X-ray detectors with excellent stability. Our X-ray detectors exhibit high sensitivity of (2.6 +/- 0.1) x 10(4) mu C Gy(air)(-1) cm(-2) under 1 V cm(-1) and ultralow limit of detection of 7.09 nGy(air) s(-1). In addition, they feature long-term operational stability over half a year and impressive thermal stability up to 125 degrees C. We further demonstrate the promise of our perovskite X-ray detectors for low-bias portable applications with high-quality X-ray imaging and monitoring prototypes.
|
|
| 35. |
- Karlsson, Max, et al.
(författare)
-
Mixed halide perovskites for spectrally stable and high-efficiency blue light-emitting diodes
- 2021
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Bright and efficient blue emission is key to further development of metal halide perovskite light-emitting diodes. Although modifying bromide/chloride composition is straightforward to achieve blue emission, practical implementation of this strategy has been challenging due to poor colour stability and severe photoluminescence quenching. Both detrimental effects become increasingly prominent in perovskites with the high chloride content needed to produce blue emission. Here, we solve these critical challenges in mixed halide perovskites and demonstrate spectrally stable blue perovskite light-emitting diodes over a wide range of emission wavelengths from 490 to 451 nanometres. The emission colour is directly tuned by modifying the halide composition. Particularly, our blue and deep-blue light-emitting diodes based on three-dimensional perovskites show high EQE values of 11.0% and 5.5% with emission peaks at 477 and 467 nm, respectively. These achievements are enabled by a vapour-assisted crystallization technique, which largely mitigates local compositional heterogeneity and ion migration.
|
|
| 36. |
- Li, Danqin, et al.
(författare)
-
Enhanced and Balanced Charge Transport Boosting Ternary Solar Cells Over 17% Efficiency
- 2020
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 32:34
-
Tidskriftsartikel (refereegranskat)abstract
- Ternary architecture is one of the most effective strategies to boost the power conversion efficiency (PCE) of organic solar cells (OSCs). Here, an OSC with a ternary architecture featuring a highly crystalline molecular donor DRTB-T-C4 as a third component to the host binary system consisting of a polymer donor PM6 and a nonfullerene acceptor Y6 is reported. The third component is used to achieve enhanced and balanced charge transport, contributing to an improved fill factor (FF) of 0.813 and yielding an impressive PCE of 17.13%. The heterojunctions are designed using so-called pinning energies to promote exciton separation and reduce recombination loss. In addition, the preferential location of DRTB-T-C4 at the interface between PM6 and Y6 plays an important role in optimizing the morphology of the active layer.
|
|
| 37. |
|
|
| 38. |
- Li, Guoshuai, et al.
(författare)
-
Site selection of desert solar farms based on heterogeneous sand flux
- 2024
-
Ingår i: npj Climate and Atmospheric Science. - 2397-3722. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- Site selection for building solar farms in deserts is crucial and must consider the dune threats associated with sand flux, such as sand burial and dust contamination. Understanding changes in sand flux can optimize the site selection of desert solar farms. Here we use the ERA5-Land hourly wind data with 0.1° × 0.1° resolution to calculate the yearly sand flux from 1950 to 2022. The mean of sand flux is used to score the suitability of global deserts for building solar farms. We find that the majority of global deserts have low flux potential (≤ 40 m3 m-1 y-1) and resultant flux potential (≤ 2.0 m3 m-1 y-1) for the period 1950–2022. The scoring result demonstrates that global deserts have obvious patchy distribution of site suitability for building solar farms. Our study contributes to optimizing the site selection of desert solar farms, which aligns with the United Nations sustainability development goals for achieving affordable and clean energy target by 2030.
|
|
| 39. |
- Liu, Yihong, et al.
(författare)
-
Fracture and interfacial delamination origins of bilayer ceramic composites for dental restorations
- 2010
-
Ingår i: Journal of the European Ceramic Society. - : Elsevier BV. - 0955-2219 .- 1873-619X. ; 30:6, s. 1297-1305
-
Tidskriftsartikel (refereegranskat)abstract
- Alumina and zirconia (Y-TZP) based bilayer ceramic dental composites with core to veneer thickness ratio (R-value) of 1: 1 and 2:1 were fabricated through an established dental laboratory multi-steps-firing procedure. Their flexural strengths were determined by three-point bending test. A combinational approach of numerical simulations by finite element analysis associated with direct fractography investigation was applied to elucidate the origins of fracture and interfacial delamination and the influence of physical properties mismatch between core ceramic and veneer porcelain. A newly developed argon ion beam cross-section polishing technique was used to conduct fine polishing required for close investigating of the core-veneer interface under scanning electron microscope. For the same core ceramic no significant difference was observed in determined flexural strength of two groups of bilayer composites. The flexural strength of the bilayer composites is similar to 55% and similar to 35% of the core ceramics and achieved similar to 90% and 70-77% of the predicated value respectively in case of Y-TZP and alumina based composites. Numerical simulations by finite element analysis indicate that the often observed interfacial delamination in Y-TZP based bilayer composites has a clear origin of the severe physical properties mismatch between veneer porcelain and core ceramics, particularly the flexural strength, which may be prevented by increasing the flexural strength of veneer porcelain to above 300 MPa. The observation of the formation of microcracks in alumina core immediately one grain-thick under the veneer-core interface warns the possible thermal damages initiated during the veneering operation.
|
|
| 40. |
- Liu, Y. H., et al.
(författare)
-
Bilayered ceramic dental composites with adhesive or reactive bonded interfaces
- 2013
-
Ingår i: Advances in Applied Ceramics. - 1743-6753 .- 1743-6761. ; 112:4, s. 227-234
-
Tidskriftsartikel (refereegranskat)abstract
- By close inspection of the well polished cross-sections, two categories of interfaces were classified, namely, adhesive bonding between veneering porcelains and zirconia or alumina cores versus reactive bonding between veneering porcelains and cores of glass infiltrated alumina or lithium disilicate based glass ceramics. Argon ion beam cross-section polishing technique was applied to achieve gentle and fine polishing required for high resolution interfacial characterisation by scanning electron microscopy. The observations suggest that it is desirable to enhance the interfacial reactive bonding in order to avoid delamination in alumina and zirconia based composites.
|
|
| 41. |
- Manni, Giovanni Li, et al.
(författare)
-
The OpenMolcas Web : A Community-Driven Approach to Advancing Computational Chemistry
- 2023
-
Ingår i: Journal of Chemical Theory and Computation. - : American Chemical Society (ACS). - 1549-9618 .- 1549-9626. ; 19:20, s. 6933-6991
-
Tidskriftsartikel (refereegranskat)abstract
- The developments of the open-source OpenMolcas chemistry software environment since spring 2020 are described, with a focus on novel functionalities accessible in the stable branch of the package or via interfaces with other packages. These developments span a wide range of topics in computational chemistry and are presented in thematic sections: electronic structure theory, electronic spectroscopy simulations, analytic gradients and molecular structure optimizations, ab initio molecular dynamics, and other new features. This report offers an overview of the chemical phenomena and processes OpenMolcas can address, while showing that OpenMolcas is an attractive platform for state-of-the-art atomistic computer simulations.
|
|
| 42. |
|
|
| 43. |
- Marcotte, Harold, et al.
(författare)
-
Conversion of monoclonal IgG to dimeric and secretory IgA restores neutralizing ability and prevents Infection of Omicron lineages
- 2024
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : NATL ACAD SCIENCES. - 0027-8424 .- 1091-6490. ; 121:3
-
Tidskriftsartikel (refereegranskat)abstract
- The emergence of Omicron lineages and descendent subvariants continues to present a severe threat to the effectiveness of vaccines and therapeutic antibodies. We have previ- ously suggested that an insufficient mucosal immunoglobulin A (IgA) response induced by the mRNA vaccines is associated with a surge in breakthrough infections. Here, we further show that the intramuscular mRNA and/or inactivated vaccines cannot suffi- ciently boost the mucosal secretory IgA response in uninfected individuals, particu- larly against the Omicron variant. We thus engineered and characterized recombinant monomeric, dimeric, and secretory IgAl antibodies derived from four neutralizing IgG monoclonal antibodies (mAbs 01A05, rmAb23, DXP-604, and XG014) targeting the receptor-binding domain of the spike protein. Compared to their parental IgG antibod- ies, dimeric and secretory IgAl antibodies showed a higher neutralizing activity against different variants of concern (VOCs), in part due to an increased avidity. Importantly, the dimeric or secretory IgAl form of the DXP-604 antibody significantly outperformed its parental IgG antibody, and neutralized the Omicron lineages BA.1, BA.2, and BA.4/5 with a 25- to 75-fold increase in potency. In human angiotensin converting enzyme 2 (ACE2) transgenic mice, a single intranasal dose of the dimeric IgA DXP-604 conferred prophylactic and therapeutic protection against Omicron BA.5. Thus, dimeric or secre- tory IgA delivered by nasal administration may potentially be exploited for the treatment Iand prevention of Omicron infection, thereby providing an alternative tool for combating immune evasion by the current circulating subvariants and, potentially, future VOCs.
|
|
| 44. |
- Nie, Shuai, et al.
(författare)
-
Gapless genome assembly of azalea and multi-omics investigation into divergence between two species with distinct flower color
- 2023
-
Ingår i: Horticulture Research. - : Oxford University Press. - 2662-6810 .- 2052-7276. ; 10:1
-
Tidskriftsartikel (refereegranskat)abstract
- The genus Rhododendron (Ericaceae), with more than 1000 species highly diverse in flower color, is providing distinct ornamental values and a model system for flower color studies. Here, we investigated the divergence between two parental species with different flower color widely used for azalea breeding. Gapless genome assembly was generated for the yellow-flowered azalea, Rhododendron molle. Comparative genomics found recent proliferation of long terminal repeat retrotransposons (LTR-RTs), especially Gypsy, has resulted in a 125 Mb (19%) genome size increase in species-specific regions, and a significant amount of dispersed gene duplicates (13 402) and pseudogenes (17 437). Metabolomic assessment revealed that yellow flower coloration is attributed to the dynamic changes of carotenoids/flavonols biosynthesis and chlorophyll degradation. Time-ordered gene co-expression networks (TO-GCNs) and the comparison confirmed the metabolome and uncovered the specific gene regulatory changes underpinning the distinct flower pigmentation. B3 and ERF TFs were found dominating the gene regulation of carotenoids/flavonols characterized pigmentation in R. molle, while WRKY, ERF, WD40, C2H2, and NAC TFs collectively regulated the anthocyanins characterized pigmentation in the red-flowered R simsii. This study employed a multi-omics strategy in disentangling the complex divergence between two important azaleas and provided references for further functional genetics and molecular breeding.
|
|
| 45. |
- Ning, Weihua, et al.
(författare)
-
Magnetizing lead-free halide double perovskites
- 2020
-
Ingår i: Science Advances. - : American Association for the Advancement of Science. - 2375-2548. ; 6:45
-
Tidskriftsartikel (refereegranskat)abstract
- Spintronics holds great potential for next-generation high-speed and low-power consumption information technology. Recently, lead halide perovskites (LHPs), which have gained great success in optoelectronics, also show interesting magnetic properties. However, the spin-related properties in LHPs originate from the spin-orbit coupling of Pb, limiting further development of these materials in spintronics. Here, we demonstrate a new generation of halide perovskites, by alloying magnetic elements into optoelectronic double perovskites, which provide rich chemical and structural diversities to host different magnetic elements. In our iron-alloyed double perovskite, Cs2Ag(Bi:Fe)Br-6, Fe3+ replaces Bi3+ and forms FeBr6 clusters that homogenously distribute throughout the double perovskite crystals. We observe a strong temperature-dependent magnetic response at temperatures below 30 K, which is tentatively attributed to a weak ferromagnetic or antiferromagnetic response from localized regions. We anticipate that this work will stimulate future efforts in exploring this simple yet efficient approach to develop new spintronic materials based on lead-free double perovskites.
|
|
| 46. |
- Park, Jihye, et al.
(författare)
-
Stabilization of Hexaaminobenzene in a 2D Conductive Metal-Organic Framework for High Power Sodium Storage
- 2018
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 140:32, s. 10315-10323
-
Tidskriftsartikel (refereegranskat)abstract
- Redox-active organic materials have gained growing attention as electrodes of rechargeable batteries. However, their key limitations are the low electronic conductivity and limited chemical and structural stability under redox conditions. Herein, we report a new cobalt-based ;2D conductive metal-organic framework (MOF), Co-HAB, having stable, accessible, dense active sites for high-power energy storage device through conjugative coordination between a redox-active linker, hexaaminobenzene (HAB), and a Co(II) center. Given the exceptional capability of Co-HAB for stabilizing reactive HAB, a reversible three-electron redox reaction per HAB was successfully demonstrated for the first time, thereby presenting a promising new electrode material for sodium-ion storage. Specifically, through synthetic tunability of Co-HAB, the bulk electrical conductivity of 1.57 S cm(-1) was achieved, enabling an extremely high rate capability, delivering 214 mAh g(-1) within 7 min or 152 mAh g(-1) in 45 s. Meanwhile, an almost linear increase of the areal capacity upon increasing active mass loading up to 9.6 mg cm(-2) was obtained, demonstrating 2.6 mAh cm(-2) with a trace amount of conducting agent.
|
|
| 47. |
- Park, Jihye, et al.
(författare)
-
Synthetic Routes for a 2D Semiconductive Copper Hexahydroxybenzene Metal-Organic Framework
- 2018
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 140:44, s. 14533-14537
-
Tidskriftsartikel (refereegranskat)abstract
- Conductive metal-organic frameworks (c-MOFs) have shown outstanding performance in energy storage and electrocatalysis. Varying the bridging metal species and the coordinating atom are versatile approaches to tune their intrinsic electronic properties in c-MOFs. Herein we report the first synthesis of the oxygen analog of M-3(C6X6)(2) (X = NH, S) family using Cu(II) and hexahydroxybenzene (HHB), namely Cu-HHB [Cu-3(C6O6)(2)], through a kinetically controlled approach with a competing coordination reagent. We also successfully demonstrate an economical synthetic approach using tetrahydroxyquinone as the starting material. Cu-HHB was found to have a partially eclipsed packing between adjacent 2D layers and a bandgap of approximately 1 eV. The addition of Cu-HHB to the family of synthetically realized M-3(C6X6)(2) c-MOFs will enable greater understanding of the influence of the organic linkers and metals, and further broadens the range of applications for these materials.
|
|
| 48. |
- Phukhamsakda, Chayanard, et al.
(författare)
-
The numbers of fungi: contributions from traditional taxonomic studies and challenges of metabarcoding
- 2022
-
Ingår i: Fungal diversity. - : Springer Science and Business Media LLC. - 1560-2745 .- 1878-9129. ; 114:1, s. 327-386
-
Tidskriftsartikel (refereegranskat)abstract
- The global diversity of fungi has been estimated using several different approaches. There is somewhere between 2–11 million estimated species, but the number of formally described taxa is around 150,000, a tiny fraction of the total. In this paper, we examine 12 ascomycete genera as case studies to establish trends in fungal species descriptions, and introduce new species in each genus. To highlight the importance of traditional morpho-molecular methods in publishing new species, we introduce novel taxa in 12 genera that are considered to have low species discovery. We discuss whether the species are likely to be rare or due to a lack of extensive sampling and classification. The genera are Apiospora, Bambusicola, Beltrania, Capronia, Distoseptispora, Endocalyx, Neocatenulostroma, Neodeightonia, Paraconiothyrium, Peroneutypa, Phaeoacremonium and Vanakripa. We discuss host-specificity in selected genera and compare the number of species epithets in each genus with the number of ITS (barcode) sequences deposited in GenBank and UNITE. We furthermore discuss the relationship between the divergence times of these genera with those of their hosts. We hypothesize whether there might be more species in these genera and discuss hosts and habitats that should be investigated for novel species discovery.
|
|
| 49. |
- Qu, Chang, et al.
(författare)
-
Functional significance of asymmetrical retention of parental alleles in a hybrid pine species complex
- 2024
-
Ingår i: Journal of Systematics and Evolution. - : John Wiley & Sons. - 1674-4918 .- 1759-6831. ; 62:1, s. 135-148
-
Tidskriftsartikel (refereegranskat)abstract
- Hybrid genomes usually harbor asymmetrical parental contributions. However, it is challenging to infer the functional significance of asymmetrical retention of parental alleles in hybrid populations of conifer trees. Here we investigated the diversity in the glutathione S-transferase (GST) gene family in a hybrid pine Pinus densata and its parents (Pinus tabuliformis and Pinus yunnanensis). Plant GSTs play major roles in protecting plants against biotic and abiotic stresses. In this study, 19 orthologous groups of GST genes were identified and cloned from these three species. We examined their expression in different tissues, and then purified the corresponding proteins to characterize their enzymatic activities and specificities toward different substrates. We found that among the 19 GST orthologous groups, divergence in gene expression and in enzymatic activities toward different substrates was prevalent. P. densata preferentially retained P. yunnanensis-like GSTs for 17 out of the 19 gene loci. We determined the first GST crystal structure from conifer species at a resolution of 2.19 Å. Based on this structure, we performed site-directed mutagenesis to replace amino acid residuals in different wild-types of GSTs to understand their functional impacts. Reciprocal replacement of amino acid residuals in native GSTs of P. densata and P. tabuliformis demonstrated significant changes in enzyme functions and identified key sites controlling GSTs activities. This study illustrates an approach to evaluating the functional significance of sequence variations in conifer genomes. Our study also sheds light on plausible mechanisms for controlling the selective retention of parental alleles in the P. densata genome.
|
|
| 50. |
|
|
