| 1. |
|
|
| 2. |
- Kurdve, Martin, Dr, 1971-, et al.
(författare)
-
Designing visual management in manufacturing from a user perspective
- 2019
-
Ingår i: Procedia CIRP. - : Elsevier B.V.. - 2212-8271. ; , s. 886-891, s. 886-891
-
Konferensbidrag (refereegranskat)abstract
- Many organisations use daily meetings, whiteboards and an information system for employee intra-communication. While Operation Management research is often management centred, Human Centred Design, instead, takes a user’s perspective. This research aims to reflect upon and describe a method, applied in practice in a double case study within manufacturing, on how to (re-)design meetings and visual management boards, and what type of information and key performance indicators are most relevant for the personnel. The paper proposes a lean Kata-improvement inspired design method, which takes the personnel’s perspective on design of daily visual management. © 2019 The Authors. Published by Elsevier B.V.
|
|
| 3. |
- Aasa, Björn, et al.
(författare)
-
A characterisation of pain, disability, kinesiophobia and physical capacity in patients with predominantly peripherally mediated mechanical low back pain
- 2011
-
Ingår i: Physiotherapy. - 0031-9406 .- 1873-1465. ; 97:Suppl. 1, s. eS18-
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: The specific objectives were to: 1) describe the level of pain intensity, disability, activity limitation, kinesiophobia and physical capacity in patients with predominantly peripherally mediated mechanical back pain, and 2) investigate whether differences between these patients in physical and psychosocial factors can be distinguished when the patients are further sub-grouped.Relevance: To improve assessment among patients with chronic low back pain (CLBP) it is important to investigate the prevalence of physical and psychosocial features in homogenous sub-groups.Participants: Seventy-one patients with CLBP, 20-60 years old, with peripherally mediated mechanical pain at the the moment for the study, were included and each patient was sub-classified into one of five sub-groups based on their pain behaviour and functional movement pattern (flexion n=20, flexion/lateral shift, n=11, active extension n=23 , passive extension n=8, and multidirectional pattern n=9).Methods: Data on pain intensity (Visual Analogue Scale), disability (the Roland and Morris Questionnaire), activity limitation (the Patient Specific Functional Scale), kinesiophobia (the Tampa Scale of Kinesiophobia) and physical capacity (lifting capacity and trunk extensor endurance) was collected.Analysis: Mean and standard deviation for parametric and median and interquartile range for non-parametric data were used for descriptive statistics. One-way ANOVA for normally distributed data and Kruskal-Wallis for non-normally distributed data were used for analyses of differences between the sub-groups. The subjects were also divided into two age-groups (20-40 and 41-60 years) and measures of physical capacity were compared to women and men at the ages of 34 and 50, respectively, in the general Swedish population using one sample T-test.Results: The patients reported low to moderate pain intensity (3.1/10±2.4), disability (RMDQ (7.27/24 ±4.2) and kinesiophobia (33.4/68 ±7) and these levels were lower than reported levels in other studies including more heterogenous groups of patients with CLBP. The patiens reported activity limitations (PSFS 13/30±23). Lifting capacity and trunk extensor endurance were significantly lower than in the general population in the youngest age-group. No significant differences in pain intensity, disability, kinesiophobia or physical capacity were found between the sub-groups.Conclusions: This research highlights that patients with predominantly peripherally mediated mechanical back pain may differ from other sub-groups of patients with CLBP (e.g., patients with central sensitization as dominating pain mechanism) regarding physical and psychosocial factors. The individual variation in pain intensity, disability, kinesiophbia and physical capacity among the patients indicates the importance to assess these factors in every patient. Due to the fact that there were few patients in the sub-groups, further research is necessary to explore whether there are differences, that we were not able to disingjish, between patients with different movement patterns.
|
|
| 4. |
|
|
| 5. |
- Aasa, Björn, et al.
(författare)
-
Individualized low-load motor control exercises and education versus a high-load lifting exercise and education to improve activity, pain intensity, and physical performance in patients with low back pain : a randomized controlled trial
- 2015
-
Ingår i: Journal of Orthopaedic and Sports Physical Therapy. - : Journal of Orthopaedic & Sports Physical Therapy (JOSPT). - 0190-6011 .- 1938-1344. ; 45:2, s. 77-85
-
Tidskriftsartikel (refereegranskat)abstract
- Study Design Randomized controlled trial. Background Low back pain is a common disorder. Patients with low back pain frequently have aberrant and pain-provocative movement patterns that often are addressed with motor control exercises. Objective To compare the effects of low-load motor control (LMC) exercise and those of a high-load lifting (HLL) exercise. Methods Seventy participants with recurrent low back pain, who were diagnosed with nociceptive mechanical pain as their dominating pain pattern, were randomized to either LMC or HLL exercise treatments. Participants were offered 12 treatment sessions over an 8-week period. All participants were also provided with education regarding pain mechanisms. Methods Participants were assessed prior to and following treatment. The primary outcome measures were activity (the Patient-Specific Functional Scale) and average pain intensity over the last 7 days (visual analog scale). The secondary outcome measure was a physical performance test battery that included 1 strength, 3 endurance, and 7 movement control tests for the lumbopelvic region. Results Both interventions resulted in significant within-group improvements in pain intensity, strength, and endurance. The LMC group showed significantly greater improvement on the Patient-Specific Functional Scale (4.2 points) compared with the HLL group (2.5 points) (P<.001). There were no significant between-group differences in pain intensity (P = .505), strength, and 1 of the 3 endurance tests. However, the LMC group showed an increase (from 2.9 to 5.9) on the movement control test subscale, whereas the HLL group showed no change (from 3.9 to 3.1) (P<.001). Conclusion An LMC intervention may result in superior outcomes in activity, movement control, and muscle endurance compared to an HLL intervention, but not in pain intensity, strength, or endurance.
|
|
| 6. |
- Aasa, Ulrika, et al.
(författare)
-
A descriptive analysis of functional impairments and patho-anatomical findings in eight powerlifters
- 2020
-
Ingår i: Journal of Sports Medicine and Physical Fitness. - : Edizioni Minerva Medica. - 0022-4707 .- 1827-1928. ; 60:4, s. 582-593
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Low back pain (LBP) is a common pain problem in powerlifters. There is a lack of evidence to guide powerlifters and health-care professionals in understanding the role of powerlifting in the development of LBP and treatment of injuries in powerlifters. This study aimed to describe functional impairments and patho-anatomical findings in eight powerlifters with and without LBP. METHODS: First, four powerlifters with LBP were recruited. Each powerlifter was then matched with a pain-free lifter (Control) by age, Body Mass Index and competition weight class. They all performed physical performance tests and were examined with magnetic resonance imaging. Four weeks prior to the examination the powerlifters also recorded training load. Powerlifters with LBP were also examined by a physiotherapist in order to define their pain and impairments. RESULTS: The four male powerlifters with LBP had a nociceptive pain associated with non-ideal squatting technique, higher flexibility in their lumbar spine than in their hips and patho-anatomical findings such as degenerated discs (four), spondylolysis (one) and spinal stenosis (one). However, the controls also showed similar functional impairments and patho-anatomical findings. CONCLUSIONS: Powerlifters with and without LBP show similar functional impairments and patho-anatomical findings. However, powerlifters' LBP seems associated with pain during movement and loading of the lumbar spine. The association and causation between specific functional impairments, patho-anatomical findings and LBP in powerlifters has to be further investigated in studies including more participants.
|
|
| 7. |
- Aasa, Ulrika, et al.
(författare)
-
Injuries among weightlifters and powerlifters : a systematic review
- 2017
-
Ingår i: British Journal of Sports Medicine. - : BMJ. - 0306-3674 .- 1473-0480. ; 51:4, s. 211-219
-
Tidskriftsartikel (refereegranskat)abstract
- Background Olympic weightlifting and powerlifting are two sports that expose the body to great forces. Injury characteristics have not been systematically reviewed for these two growing sports.Objective The purpose of this study was to systematically review the literature regarding various definitions of injuries used, injury localisation, the prevalence and incidence of injuries and the associated risk factors for injuries in weightlifting and powerlifting.Design Systematic review.Data sources Five databases, PubMed, MEDLINE, SPORTDiscus, Scopus and Web of Science, were searched between 9 March and 6 April 2015.Eligibility criteria for selecting studies Studies assessing injury incidence and prevalence in Olympic weightlifting and powerlifting were included. The Quality assessment tool for observational cohort and cross-sectional studies was used to assess methodological quality.Results 9 studies were included in the review. Injury was defined fairly consistently across studies. Most studies were of low methodological quality. The spine, shoulder and the knee were the most common injury localisations in both sports. The injury incidence in weightlifting was 2.4–3.3 injuries/1000 hours of training and 1.0–4.4 injuries/1000 hours of training in powerlifting. Only one retrospective study had analysed possible risk factors.Summary/conclusions The risk of injury in both sports were similar to other non-contact sports also requiring strength/power, but low compared to contact sports. The severity of injuries differed in the included studies. Since little has been studied regarding possible risk factors to injuries, further research is therefore warranted to explain why athletes get injured and how to prevent injuries.Trial registration number PROSPERO CRD42015014805.
|
|
| 8. |
- Aasa, Ulrika, et al.
(författare)
-
Krafttag ska stoppa styrkelyftarnas skador
- 2015
-
Ingår i: Svensk idrottsforskning. - : Centrum för idrottsforskning. - 1103-4629 .- 2002-3944. ; :4, s. 29-31
-
Tidskriftsartikel (populärvet., debatt m.m.)
|
|
| 9. |
- Aasa, Ulrika, et al.
(författare)
-
Variability of lumbar spinal alignment among power- and weightlifters during the deadlift and barbell back squat
- 2022
-
Ingår i: Sports Biomechanics. - : Routledge. - 1476-3141 .- 1752-6116. ; 21:6, s. 707-717
-
Tidskriftsartikel (refereegranskat)abstract
- The aims of the study were to evaluate the relative and absolute variability of upper (T11-L2) and lower (L2-S2) lumbar spinal alignment in power- and weightlifters during the deadlift and back squat exercises, and to compare this alignment between the two lifting groups. Twenty-four competitive powerlifters (n = 14) and weightlifters (n = 10) performed three repetitions of the deadlift and the back squat exercises using a load equivalent to 70% of their respective one-repetition maximum. The main outcome measures were the three-dimensional lumbar spinal alignment for start position, minimum and maximum angle of their spinal alignment, and range of motion measured using inertial measurement units. Relative intra-trial reliability was calculated using the two-way random model intraclass correlation coefficient (ICC) and absolute reliability with minimal detectable change (MDC). The ICC ranged between 0.69 and 0.99 and the MDC between 1 degrees-8 degrees for the deadlift. Corresponding figures for the squat were 0.78-0.99 and 1 degrees-6 degrees. In all participants during both exercises, spinal adjustments were made in both thoracolumbar and lumbopelvic areas in all three dimensions. In conclusion, when performing three repetitions of the deadlift and the squat, lumbar spinal alignment of the lifters did not change much between repetitions and did not differ significantly between power- and weightlifters.
|
|
| 10. |
- Andersson, Christian, et al.
(författare)
-
Effect of different carbon sources on the production of succinic acid using metabolically engineered Escherichia coli
- 2007
-
Ingår i: Biotechnology progress (Print). - : Wiley. - 8756-7938 .- 1520-6033. ; 23:2, s. 381-388
-
Tidskriftsartikel (refereegranskat)abstract
- Succinic acid (SA) is an important platform molecule in the synthesis of a number of commodity and specialty chemicals. In the present work, dual-phase batch fermentations with the E. coli strain AFP184 were performed using a medium suited for large-scale industrial production of SA. The ability of the strain to ferment different sugars was investigated. The sugars studied were sucrose, glucose, fructose, xylose, and equal mixtures of glucose and fructose and glucose and xylose at a total initial sugar concentration of 100 g L-1. AFP184 was able to utilize all sugars and sugar combinations except sucrose for biomass generation and succinate production. For sucrose as a substrate no succinic acid was produced and none of the sucrose was metabolized. The succinic acid yield from glucose (0.83 g succinic acid per gram glucose consumed anaerobically) was higher than the yield from fructose (0.66 g g-1). When using xylose as a carbon source, a yield of 0.50 g g-1 was obtained. In the mixed-sugar fermentations no catabolite repression was detected. Mixtures of glucose and xylose resulted in higher yields (0.60 g g-1) than use of xylose alone. Fermenting glucose mixed with fructose gave a lower yield (0.58 g g-1) than fructose used as the sole carbon source. The reason is an increased pyruvate production. The pyruvate concentration decreased later in the fermentation. Final succinic acid concentrations were in the range of 25-40 g L-1. Acetic and pyruvic acid were the only other products detected and accumulated to concentrations of 2.7-6.7 and 0-2.7 g L-1. Production of succinic acid decreased when organic acid concentrations reached approximately 30 g L-1. This study demonstrates that E. coli strain AFP184 is able to produce succinic acid in a low cost medium from a variety of sugars with only small amounts of byproducts formed.
|
|
| 11. |
- Andersson, Christian, et al.
(författare)
-
Effects of neutralising agent, organic acids, and osmolarity on succinic acid production by Escherichia coli AFP184
- 2008
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Using a low-cost medium Escherichia coli AFP184 has previously been reported to produce succinic acid with volumetric productivities close to 3 g L-1 h-1. At a total organic acid concentration of 30 g L-1 the productivity decreased drastically resulting in final succinate concentrations of 40 g L-1. The economical viability of biochemical succinic acid production would benefit from higher final succinic acid concentrations and volumetric productivities maintained at >2.5 g L-1 h-1 for an extended period of time. In the present work the effects of osmolarity and neutralising agent (NH4OH, KOH, NaOH, K2CO3, and Na2CO3) on succinic acid production by AFP184 were investigated. Highest concentration of succinic acid was obtained with Na2CO3, 75 g L-1. It was also found that the osmolarity resulting from succinate production and subsequent base addition, only marginally affected the productivity per viable cell. Organic acid inhibition due to the produced succinic acid on the other hand significantly reduced succinic acid productivity per viable cell. When using NH4OH productivity completely ceased at approximately 40 g L-1. Volumetric productivities remained at 2.5 g L-1 h-1 for 5 to 10 hours longer when using K- or Na-bases than when using NH4OH. However, loss of cell viability occurred, and together with the acid inhibition decreased the volumetric productivities. In this study it was demonstrated that by altering the neutralising agent it was possible to increase the period of high volumetric productivity in the anaerobic phase and improve the final succinic acid concentration by almost 100 %
|
|
| 12. |
- Andersson, Christian, et al.
(författare)
-
Inhibition of succinic acid production in metabolically engineered Escherichia Coli by neutralizing agent, organic acids, and osmolarity
- 2009
-
Ingår i: Biotechnology progress (Print). - : Wiley. - 8756-7938 .- 1520-6033. ; 25:1, s. 116-123
-
Tidskriftsartikel (refereegranskat)abstract
- The economical viability of biochemical succinic acid production is a result of many processing parameters including final succinic acid concentration, recovery of succinate, and the volumetric productivity. Maintaining volumetric productivities >2.5 g L-1 h(-1) is important if production of succinic acid from. renewable resources should be competitive. In this work, the effects of organic acids, osmolarity, and neutralizing agent (NH4OH, KOH, NaOH, K2CO3, and Na2CO3) on the fermentative succinic acid production by Escherichia coli AFP184 were investigated. The highest concentration of succinic acid, 77 g L-1. was obtained with Na2O3. In general, irrespective of the base used, succinic acid productivity per viable cell was significantly reduced as the concentration of the produced acid increased. Increased osmolarity resulting from base addition during succinate production only marginally affected the productivity per viable cell. Addition of the osmoprotectant glycine betaine to cultures resulted in an increased aerobic growth rate and anaerobic glucose consumption rate, but decreased succinic acid yield. When using NH4OH productivity completely ceased at a succinic acid concentration of similar to 40 g L-1. Volumetric productivities remained at 2.5 g L-1 h(-1) for tip to 10 h longer when K- or Na-bases where used instead of NH4OH. The decrease in cellular succinic acid productivity observed during the anaerobic phase was found to be due to increased organic acid concentrations rather than medium osmolarity.
|
|
| 13. |
- Andersson, Christian, et al.
(författare)
-
Maintaining high anaerobic succinic acid productivity by product removal
- 2010
-
Ingår i: Bioprocess and biosystems engineering (Print). - : Springer Science and Business Media LLC. - 1615-7591 .- 1615-7605. ; 33:6, s. 711-718
-
Tidskriftsartikel (refereegranskat)abstract
- During dual-phase fermentations using Escherichia coli engineered for succinic acid production, the productivity and viable cell concentration decrease as the concentration of succinic acid increases. The effects of succinic acid on the fermentation kinetics, yield, and cell viability were investigated by resuspending cells in fresh media after selected fermentation times. The cellular succinic acid productivity could be restored, but cell viability continuously decreased throughout the fermentations by up to 80% and subsequently the volumetric productivity was reduced. Omitting complex nutrients in the resuspension media had no significant effect on cellular succinate productivity and yield, although the viable cell concentration and thus the volumetric productivity was reduced by approximately 20%. By resuspending the cells, the amount of succinate produced during a 100-h fermentation was increased by more than 60%. The results demonstrate that by product removal succinic acid productivity can be maintained at high levels for extended periods of time.
|
|
| 14. |
- Andersson, Christian, et al.
(författare)
-
Process for producing succinic acid from sucrose
- 2005
-
Patent (populärvet., debatt m.m.)abstract
- A process for hydrolyzing sucrose to glucose and fructose using succinic acid is described. The hydrolysate can be used to produce purified glucose and/or fructose or can be used as a carbon source for fermentations to produce various chemicals including succinic acid.
|
|
| 15. |
- Andreasson, Ulrika, et al.
(författare)
-
Identification of molecular targets associated with transformed diffuse large B cell lymphoma using highly purified tumor cells
- 2009
-
Ingår i: American Journal of Hematology. - : Wiley. - 0361-8609 .- 1096-8652. ; 84:12, s. 803-808
-
Tidskriftsartikel (refereegranskat)abstract
- Follicular lymphoma (FL) frequently transforms into the more aggressive diffuse large B cell lymphoma (DLBCL-tr), but no protein biomarkers have been identified for predictive or early diagnosis. Gene expression analyses have identified genes changing on transformation but have failed to be reproducible in different studies, reflecting the heterogeneity within the tumor tissue and between tumor samples. Gene expression analyses on Affymetrix Human Genome U133 Plus 2.0 arrays were performed, using flow cytometry sorted tumor cells derived from FL and transformed DLBCL. To identify molecular targets associated with the transformation, subsequent immunohistochemistry (IHC) analyses of the corresponding proteins were performed. Using highly purified cells, this study identified 163 genes, which were significantly deregulated during the transformation in a majority of cases. Among the upregulated transcripts, 13 genes were selected for validation using IHC, based on the availability of commercial antibodies, and galectin-3 and NEK2 proteins specifically identify DLBCL-tr, when compared with FL. We demonstrate that by purifying tumor cells through cell sorting, thereby reducing the heterogeneity due to infiltrating cells, it was possible to identify distinct differences between tumor entities rather than variations due to cellular composition. Galectin-3 and NEK2 both identified a subgroup of DLBCL-tr, and the function of these protein markers also suggests a biological role in the transformation process.
|
|
| 16. |
- Andreasson, Ulrika, et al.
(författare)
-
Identification of uniquely expressed transcription factors in highly purified B-cell lymphoma samples.
- 2010
-
Ingår i: American Journal of Hematology. - : Wiley. - 0361-8609 .- 1096-8652. ; 85:6, s. 418-425
-
Tidskriftsartikel (refereegranskat)abstract
- Transcription factors (TFs) are critical for B-cell differentiation, affecting gene expression both by repression and transcriptional activation. Still, this information is not used for classification of B-cell lymphomas (BCLs). Traditionally, BCLs are diagnosed based on a phenotypic resemblance to normal B-cells; assessed by immunohistochemistry or flow cytometry, by using a handful of phenotypic markers. In the last decade, diagnostic and prognostic evaluation has been facilitated by global gene expression profiling (GEP), providing a new powerful means for the classification, prediction of survival, and response to treatment of lymphomas. However, most GEP studies have typically been performed on whole tissue samples, containing varying degrees of tumor cell content, which results in uncertainties in data analysis. In this study, global GEP analyses were performed on highly purified, flow-cytometry sorted tumor-cells from eight subgroups of BCLs. This enabled identification of TFs that can be uniquely associated to the tumor cells of chronic lymphocytic leukemia (CLL), diffuse large B-cell lymphoma (DLBCL), follicular lymphoma (FL), hairy cell leukemia (HCL), and mantle cell lymphoma (MCL). The identified transcription factors influence both the global and specific gene expression of the BCLs and have possible implications for diagnosis and treatment.
|
|
| 17. |
|
|
| 18. |
|
|
| 19. |
- Bengtsson, Victor, et al.
(författare)
-
Narrative review of injuries in powerlifting with special reference to their association to the squat, bench press and deadlift
- 2018
-
Ingår i: BMJ Open Sport & Exercise Medicine. - : BMJ Publishing Group Ltd. - 2055-7647. ; 4
-
Tidskriftsartikel (refereegranskat)abstract
- Pain and injuries are considered a common problem among elite athletes and recreational lifters performing the squat, bench press and deadlift. Since all three lifts engage multiple joints and expose the lifters' bodies to high physical demands often several times a week, it has been suggested that their injuries might be related to the excessively heavy loads, the large range of motion during the exercises, insufficient resting times between training sessions and/or faulty lifting technique. However, no previous article has summarised what is known about specific injuries and the injury aetiology associated with the three lifts. Thus, the aim of this narrative review was to summarise what is known about the relationships between the powerlifting exercises and the specific injuries or movement impairments that are common among lifters and recreationally active individuals.
|
|
| 20. |
- Bengtsson, Victor, et al.
(författare)
-
Thoracolumbar and Lumbopelvic Spinal Alignment During the Barbell Back Squat : A Comparison Between Men and Women
- 2023
-
Ingår i: International Journal of Sports Physical Therapy. - : International Journal of Sports Physical Therapy. - 2159-2896. ; 18:4, s. 820-830
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Maintaining neutral spinal alignment is considered important when performing the barbell back squat exercise. Since male and female lifters may differ in injury location it is important to examine whether they differ in spinal alignment during the back squat.Objectives: The study aimed to quantify the spinal alignment in the upper and lower lumbar spine during the barbell back squat exercise in male and female lifters. Secondary aims were to compare alignment during the back squat to standing habitual lumbar spine alignment and determine whether male and female lifters differ in these aspects.Study design: Observational, Cross-sectional.Methods: Competitive power- and weightlifters were recruited and performed three repetitions of the barbell back squat exercise using a load equivalent to 70% of their one-repetition maximum. Spinal alignment and range of motion were measured using inertial measurement units placed on the thoracic, lumbar and sacral spine. Data was presented descriptively and comparisons between men and women as well as spinal alignment in four different positions were done with a factorial repeated measures analysis of variance.Results: Twenty-three (14 males, 9 females) were included. During execution of the squat, spinal alignment adjustments in the lumbar spine were made in all three planes of movement, compared to the start position, in both male and female lifters. Compared to their standing habitual posture, all lifters adjusted their upper lumbar spine to a less lordotic position when in the start position of the back squat (standing upright with the barbell on their back). Only male lifters assumed a less lordotic alignment in their lower lumbar spine in the start position compared their habitual posture.Conclusions: Adjustments of spinal alignment, predominantly in the sagittal plane, are made during execution of the back squat in both male and female lifters. Further, lifters adopt a less lordotic alignment with a heavy barbell on their upper back, more so in male than female lifters. In conclusion, it seems that spinal alignment changes noticeably during the barbell back squat.Level of evidence: 3
|
|
| 21. |
- Bengtsson, Victor, et al.
(författare)
-
Thoracolumbar and lumbopelvic spinal alignment during the deadlift exercise : a comparison between men and women
- 2022
-
Ingår i: International Journal of Sports Physical Therapy. - : North American Sports Medicine Institute. - 2159-2896. ; 17:6, s. 1063-1074
-
Tidskriftsartikel (refereegranskat)abstract
- Background: A neutral spinal alignment is considered important during the execution of the deadlift exercise to decrease the risk of injury. Since male and female powerlifters experience pain in different parts of their backs, it is important to examine whether men and women differ in spinal alignment during the deadlift.Objectives: The purpose of this study was to quantify the spinal alignment in the upper (thoracolumbar, T11-L2) and lower (lumbopelvic, L2-S2) lumbar spine during the deadlift exercise in male and female lifters. Secondary aims were to compare lumbar spine alignment during the deadlift to standing habitual posture, and determine whether male and female lifters differ in these aspects.Study Design: Observational, Cross-sectional.Methods: Twenty-four (14 men, 10 women) lifters performed three repetitions of the deadlift exercise using 70% of their respective one-repetition maximum. Spinal alignment and spinal range of motion were measured using three inertial measurement units placed on the thoracic, lumbar and sacral spine. Data from three different positions were analyzed; habitual posture in standing, and start and stop positions of the deadlift, i.e. bottom and finish position respectively.Results: During the deadlift, spinal adjustments were evident in all three planes of movement. From standing habitual posture to the start position the lumbar lordosis decreased 13° in the upper and 20° in the lower lumbar spine. From start position to stop position the total range of motion in the sagittal plane was 11° in the upper and 22° in the lower lumbar spine. The decreased lumbar lordosis from standing habitual posture to the start position was significantly greater among men.Conclusions: Men and women adjust their spinal alignment in all three planes of movement when performing a deadlift and men seem to make greater adjustments from their standing habitual posture to start position in the sagittal plane. Level of Evidence 3.
|
|
| 22. |
- Berglund, Eva Caroline, et al.
(författare)
-
A Study Protocol for Validation and Implementation of Whole-Genome and -Transcriptome Sequencing as a Comprehensive Precision Diagnostic Test in Acute Leukemias
- 2022
-
Ingår i: Frontiers in Medicine. - Lausanne, Switzerland : Frontiers Media SA. - 2296-858X. ; 9, s. 1-9
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Whole-genome sequencing (WGS) and whole-transcriptome sequencing (WTS), with the ability to provide comprehensive genomic information, have become the focal point of research interest as novel techniques that can support precision diagnostics in routine clinical care of patients with various cancer types, including hematological malignancies. This national multi-center study, led by Genomic Medicine Sweden, aims to evaluate whether combined application of WGS and WTS (WGTS) is technically feasible and can be implemented as an efficient diagnostic tool in patients with acute lymphoblastic leukemia (ALL) and acute myeloid leukemia (AML). In addition to clinical impact assessment, a health-economic evaluation of such strategy will be performed. Methods and Analysis: The study comprises four phases (i.e., retrospective, prospective, real-time validation, and follow-up) including approximately 700 adult and pediatric Swedish AML and ALL patients. Results of WGS for tumor (90×) and normal/germline (30×) samples as well as WTS for tumors only will be compared to current standard of care diagnostics. Primary study endpoints are diagnostic efficiency and improved diagnostic yield. Secondary endpoints are technical and clinical feasibility for routine implementation, clinical utility, and health-economic impact. Discussion: Data from this national multi-center study will be used to evaluate clinical performance of the integrated WGTS diagnostic workflow compared with standard of care. The study will also elucidate clinical and health-economic impacts of a combined WGTS strategy when implemented in routine clinical care. Clinical Trial Registration: [https://doi.org/10.1186/ISRCTN66987142], identifier [ISRCTN66987142].
|
|
| 23. |
- Berglund, Johan, et al.
(författare)
-
High-touch and high-tech - paradoxical narratives in a bank merger
- 2004
-
Ingår i: Scandinavian Journal of Management. - : Elsevier. - 1873-3387 .- 0956-5221. ; 20:4, s. 335-355
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we examine the role of paradoxes as narrative devices in organizational contexts. A merger between two banks is used to illustrate managers employing paradoxes to construct meaning and to influence future actions of organizational members. We argue that when paradoxes are reshaped as hybrids, they provide a buffer between conflicting arguments. By employing hybrids, organizational storytellers facilitate links between existing and desired mental frameworks, thus potentially rendering transitions and changes less friction-prone. A convincing story told under these forms - Striking the right balance between potentially incommensurable but both in their own way appealing ideas - Has the potentiality to create an inclusive vision in which diverse groups can find "their" place.
|
|
| 24. |
- Berglund, Kris, et al.
(författare)
-
Fermentation-Based Building Blocks for Renewable Resource-Based Surfactants
- 2010
-
Ingår i: Surfactants from renewable resources. - Chichester : John Wiley & Sons Ltd. - 9780470760413 ; , s. 127-141
-
Bokkapitel (refereegranskat)abstract
- 'new' top-ranked building blocks; Citric acid recovery from fermentation broths and CaCO3 precipitation; Citric, acetic and lactic acid - top three industrial carboxylic acids; Fermentation-based building blocks for renewable resource-based surfactants; Fermentation-based building blocks for surfactants; Filamentous fungi, Aspergillus niger and Candida yeast strains; New fermentation-based building blocks; Organic acid metabolites - as hydrophilic moiety; Sulfonates - largest market share of anionic surfactants; Sulfosuccinate class of surfactants
|
|
| 25. |
- Berglund, Kris, et al.
(författare)
-
Fermentative Upgrading of Xylose
- 2009
-
Ingår i: NWBC-2009. - Helsinki : KCL Re-inventing paper.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Chemical pulp mills such as Kraft, soda, or sulfite mills are current examples of biorefineries that can convert lignocellulosic biomass into energy, pulp or cellulose derivatives, and tall oil. While existing viscose pulps use a hemicellulose extraction to generate soluble sugars for ethanol production, in general there still exists a large potential for other more profitable applications of the biomass (Fig. 1), i.e. the mill needs to present a widespread product portfolio. The biofuels under development from fermentation that will be discussed are the diesel fuel oxygenates dibutyl succinate and diethyl succinate to be used for reduced particulate emissions and fossil fuel replacement for diesel engines and butanol for Otto engines. It's important to stress that succinic acid, butanol and ethanol, needed for the production of the diesel additives and gasoline replacement will be produced from renewable resources and hence replacing products currently produced from non-renewable fossil sources. Since wood will be used, there will be no issue of competing with raw material used for food production. Besides biofuel production, succinic acid and butanol, can be used directly or further refined into numerous different products classified as green chemicals.
|
|
| 26. |
- Berglund, Kris, et al.
(författare)
-
Process for the production of succinic acid
- 2006
-
Patent (populärvet., debatt m.m.)abstract
- A process for the production of succinic acid can comprise supplying a media with E. coli AFP 184 and a high sugar concentration under aerobic conditions, then converting the media to aerobic conditions. Such a process can be useful when performed in conjunction with the production of ethanol in a biorefmery .
|
|
| 27. |
- Berglund Kristiansson, Elisabeth, et al.
(författare)
-
Healthcare staff's views on the patients' prerequisites to be co-creator in preventing healthcare-associated infections
- 2020
-
Ingår i: Scandinavian Journal of Caring Sciences. - : Wiley-Blackwell Publishing Inc.. - 0283-9318 .- 1471-6712. ; 34:2, s. 314-321
-
Tidskriftsartikel (refereegranskat)abstract
- Background Every year, patients are affected by suffering and death caused by adverse events in connection with health care and the most common adverse events are healthcare-associated infections (HAI). The Swedish Patient Act from 2015 strengthens the patient's position in health care; however, there is lack of knowledge of how healthcare staff experience the possibilities to make the patient involved in the preventive work of HAI. Aim To describe healthcare professionals' views on the patient's prerequisites to be co-creator in preventing HAI in connection with hospital care. Method This study had a qualitative descriptive design with semi-structured individual interviews. Qualitative inductive content analysis was used to analyse the transcribed interview data. The study setting was a hospital in Sweden in 2015. Interviews were carried out among six healthcare professionals. Results In the analysis, 5 themes and 14 categories were identified in three different domains: Organisation, Healthcare staff and Patient. The result indicates an obstacle in each domain for the patient to become co-creator in preventing HAI. In Organisation domain, a lack of organizational structure such as elaborated working methods to involve the patient was pointed out. In the domain Healthcare staff, it showed that the professionals allocate the responsibility of preventing HAI to the patient but only if they had to or if they trusted the patient. In the Patient domain, the result states that the patient was perceived as passive; they did not take own initiatives to get involved. Conclusion The patient has an important role in successful HAI prevention work and should be considered as an obvious co-creator. Nevertheless, this study shows that neither organisation nor healthcare staff are sufficiently prepared for this. The organisation must make an anchored, structured and systematic work centred on the patient's needs and give more support both to healthcare professionals and patients.
|
|
| 28. |
- Berglund, Lars, 1986-
(författare)
-
Deadlift training for patients with mechanical low back pain : a comparison of the effects of a high-load lifting exercise and individualized low-load motor control exercises
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Disability due to low back pain is common. While evidence exist that exercise is effective in reducing pain and disability, it is still largely undetermined which kind of exercises that are most effective. The overall aim of this thesis was to evaluate and compare the effects of a high-load lifting exercise and individualized low-load motor control exercises for patients with nociceptive mechanical low back pain. A secondary aim was to evaluate which patients benefit from training with a high-load lifting exercise.All four papers in this thesis were based on a randomized controlled trial including 70 participants with nociceptive mechanical low back pain as their dominating pain pattern. Participants were randomized into training with either a high-load lifting exercise (HLL), the deadlift, (n=35) or individualized low-load motor control exercises (LMC) (n=35). Both interventions included aspects of pain education. All participants were offered twelve sessions during an eight week period. The effects of the interventions were evaluated directly after and twelve months after the end of the intervention period. Outcome measures were pain intensity, activity, disability, physical performance, lumbo-pelvic alignment and lumbar multifidus muscle thickness.There was a significant between-group effect in favour of the LMC intervention regarding improvements in activity, movement control tests and some tests of trunk muscle endurance. For pain intensity there were no significant differences between groups. A majority of participants in both intervention groups showed clinically meaningful improvements from baseline to two and twelve month follow-up regarding pain intensity and activity. There were no significant differences between HLL and LMC regarding the effect on lumbo-pelvic alignment or lumbar multifidus thickness. The participants who benefit the most from the HLL intervention were those with a low pain intensity and high performance in the Biering-Sørensen test at baseline.The results of this thesis showed that the HLL intervention was not more effective than the LMC intervention. The LMC was in fact more effective in improving activity, performance in movement control tests and some tests of trunk muscle endurance, compared to the HLL intervention.The results imply that the deadlift, when combined with education, could be considered as an exercise to produce clinically relevant improvements on pain intensity in patients who prefer a high-load exercise. However, before considering deadlift training, the results suggest that pain intensity and performance in the Biering-Sørensen test should be evaluated.
|
|
| 29. |
- Berglund, Lars, et al.
(författare)
-
Effects of low-load motor control exercises and a high-load lifting exercise on lumbar multifidus thickness : a randomized controlled trial
- 2017
-
Ingår i: Spine. - : Wolters Kluwer. - 0362-2436 .- 1528-1159. ; 42:15, s. E876-E882
-
Tidskriftsartikel (refereegranskat)abstract
- STUDY DESIGN:Randomized controlled trial.OBJECTIVE:The aim of this study was to compare the effects of low-load motor control (LMC) exercises and a high-load lifting (HLL) exercise, on lumbar multifidus (LM) thickness on either side of the spine and whether the effects were affected by pain intensity or change in pain intensity.SUMMARY OF BACKGROUND DATA:There is evidence that patients with low back pain (LBP) may have a decreased size of the LM muscles with an asymmetry between sides in the lower back. It has also been shown that LMC training can affect this asymmetry. It is, however, not known whether a high-load exercise has the same effect.METHODS:Sixty-five participants diagnosed with nociceptive mechanical LBP were included and randomized into LMC exercises or a HLL exercise, the deadlift. The LM thickness was measured using rehabilitative ultrasound imaging (RUSI), at baseline and after a 2-month training period.RESULTS:There were no differences between interventions regarding effect on LM muscle thickness. However, the analysis showed a significant effect for asymmetry. The thickness of the LM muscle on the small side increased significantly compared with the large side in both intervention groups, without influence of pain at baseline, or change in pain intensity.CONCLUSION:At baseline, there was a difference in thickness of the LM muscles between sides. It seems that exercises focusing on spinal alignment may increase the thickness of the LM muscles on the small side, irrespective of exercise load. The increase in LM thickness does not appear to be mediated by either current pain intensity or the magnitude of change in pain intensity.
|
|
| 30. |
- Berglund, Lars, et al.
(författare)
-
Effects of low-load motor control exercises and a high-load lifting exercise on lumbar multifidus thickness : a randomized controlled trial
- 2017
-
Ingår i: Spine. - : Wolters Kluwer. - 0362-2436 .- 1528-1159. ; 42:15, s. E876-E882
-
Tidskriftsartikel (refereegranskat)abstract
- Study Design: Randomized controlled trialObjective: The aim of this study was to compare the effects of low-load motor control exercises and a high-load lifting exercise on lumbar multifidus thickness among patients with nociceptive mechanical low back pain.Summary of Background Data: There is evidence that patients with low back pain may have a decreased size of the lumbar multifidus muscles with an asymmetry between left/right sides in the lower back. It has also been shown that low-load motor control training can affect this asymmetry; essentially, it is effective in equalizing side differences in lumbar multifidus muscle size. It is, however, not known whether a high-load exercise has the same effect.Methods: Sixty-five participants diagnosed with nociceptive mechanical low back pain were included and randomized into low-load motor control exercises or a high-load lifting exercise, the deadlift. The lumbar multifidus thickness at the fifth lumbar vertebra was measured, using rehabilitative ultrasound imaging, at baseline and after a 2-month training period.Results: There were no differences between interventions regarding effect on lumbar multifidus muscle thickness. However, the linear mixed model analysis showed a significant effect for asymmetry. The thickness of the lumbar multifidus muscle on the small side increased significantly compared to the large side in both intervention groups.Conclusions: There was a difference in thickness of the lumbar multifidus muscles between sides. It seems that exercises focusing on spinal alignment may increase the thickness of the lumbar multifidus muscles on the small side, irrespective of exercise load.
|
|
| 31. |
- Berglund, Lars, et al.
(författare)
-
Sagittal lumbopelvic alignment in patients with low back pain and the effects of a high-load lifting exercise and individualized low-load motor control exercises : a randomized controlled trial
- 2018
-
Ingår i: The spine journal. - : Elsevier. - 1529-9430 .- 1878-1632. ; 18:3, s. 399-406
-
Tidskriftsartikel (refereegranskat)abstract
- Background Context Assessment of posture and lumbopelvic alignment is often the main focus in the classification and treatment of patients with low back pain (LBP). However, little is known regarding the effects of motor control interventions on objective measures of lumbopelvic alignment.Purpose The primary aim of this study was to describe the variation of sagittal lumbopelvic alignment in patients with nociceptive mechanical LBP. The secondary aim was to compare the effects of a high-load lifting exercise (HLL) and low-load motor control exercises (LMC) on the change in lumbopelvic alignment with a special emphasis on patients with high and low degrees of lumbar lordosis (lu) and sacral angle (sa).Study Design This study is a secondary analysis of a randomized controlled trial evaluating the effects of HLL and LMC.Patient Sample Patients from the primary study, that is, patients categorized with nociceptive mechanical LBP, who agreed to participate in the radiographic examination were included (n=66).Outcome Measures Lateral plain radiographic images were used to evaluate lumbopelvic alignment regarding the lumbar lordosis and the sacral angle as outcomes, with posterior bend as an explanatory variable.Materials and Methods The participants were recruited to the study from two occupational health-care facilities. They were randomized to either the HLL or the LMC intervention group and offered 12 supervised exercise sessions. Outcome measures were collected at baseline and following the end of intervention period 2 months after baseline. Between- and within-group analyses of intervention groups and subgroups based on the distribution of the baseline values for the lumbar lordosis and the sacral angle, respectively (LOW, MID, and HIGH), were performed using both parametric and non-parametric statistics.Results The ranges of values for the present sample were 26.9–91.6° (M=59.0°, standard deviation [SD]=11.5°) for the lumbar lordosis and 18.2–72.1° (M=42.0°, SD=9.6°) for the sacral angle. There were no significant differences between the intervention groups in the percent change of eitheroutcome measure. Neither did any outcome change significantly over time within the intervention groups. In the subgroups, based on the distribution of respective baseline values, LOWlu showed a significantly increased lumbar lordosis, whereas HIGHsa showed a significantly decreased sacral angle following intervention.Conclusions This study describes the wide distribution of values for lumbopelvic alignment for patients with nociceptive mechanical LBP. Further research is needed to investigate subgroups of other types of LBP and contrast findings to those presented in this study. Our results also suggest that retraining of the lumbopelvic alignment could be possible for patients with LBP.
|
|
| 32. |
- Berglund, Lars, et al.
(författare)
-
Styrketräning som behandling vid långvariga ländryggsbesvär
- 2017
-
Ingår i: Fysioterapi. - Stockholm : Fysioterapeuterna. - 1653-5804. ; :4, s. 28-33
-
Forskningsöversikt (övrigt vetenskapligt/konstnärligt)abstract
- Fysisk träning är viktigt för en god hälsa och fungerar även som behandlingsform vid många sjukdomar, så även ländryggsbesvär. Styrketräning har visat sig vara en mer effektiv träningsform än till exempel aerob träning vid behandling av långvariga ländryggsbesvär. I dagsläget finns det ingen konsensus kring vilket det mest effektiva styrketräningsupplägget kan vara. Den vanligaste designen av styrketräningsprogram vid ländryggsbesvär tycks vara ett upplägg med syftet att förbättra styrkan/uthålligheten av ryggsträckarmuskulaturen och därigenom uppnå smärtlindring och funktionsförbättring. I en studie från Umeå universitet och Luleå tekniska universitet har träning av marklyft för patienter med långvariga ländryggsbesvär utvärderats. Marklyftsträningen förväntades öka deltagarnas bålstyrka samtidigt som den fokuserade på förbättring av rörelsekontroll kring såväl höft som ländrygg. När den åtta veckor långa träningsperioden var slut, visade det sig att gruppen som tränat marklyft hade ökat sin bålstyrka, minskat smärta, ökat funktionsförmåga och hälsorelaterad livskvalitet i samma omfattning som gruppen som tränade individanpassad träning av rörelsekontroll. Men de hade inte förbättrats lika mycket gällande rörelsekontroll eller vardagsfunktion. Vidare forskning pågår vid Umeå universitet om skador i samband med tung styrketräning samt lyftteknikens betydelse för skador och besvär vid tung styrketräning.
|
|
| 33. |
|
|
| 34. |
- Berglund, Lars, et al.
(författare)
-
Which patients with low back pain benefit from deadlift training?
- 2015
-
Ingår i: Journal of Strength and Conditioning Research. - 1064-8011 .- 1533-4287. ; 29:7, s. 1803-1811
-
Tidskriftsartikel (refereegranskat)abstract
- Recent studies have indicated that the deadlift exercise may be effective in decreasing pain intensity and increasing activity for most, but not all, patients with a dominating mechanical low back pain pattern. This study aimed to evaluate which individual factors measured at baseline could predict activity, disability, and pain intensity in patients with mechanical low back pain after an 8-week training period involving the deadlift as a rehabilitative exercise. Thirty-five participants performed deadlift training under the supervision of a physical therapist with powerlifting experience. Measures of pain-related fear of movement, hip and trunk muscle endurance and lumbopelvic movement control were collected at baseline. Measures of activity, disability and pain intensity were collected at baseline and at follow-up. Linear regression analyses were used to create models to predict activity, disability and pain intensity at follow-up. Results showed that participants with less disability, less pain intensity and higher performance on the Biering-Sørensen test, which tests the endurance of hip and back extensor muscles, at baseline benefit from deadlift training. The Biering-Sørensen test was the strongest predictor since it was included in all predictive models. Pain intensity was the next best predictor as it was included in two predictive models. Thus, for strength and conditioning professionals who use the deadlift as a rehabilitative exercise for individuals with mechanical low back pain, it is important to ensure that clients have sufficient back extensor strength and endurance and a sufficiently low pain intensity level to benefit from training involving the deadlift exercise.
|
|
| 35. |
- Berglund, Lars, et al.
(författare)
-
Which patients with persistent mechanical low back pain will respond to high load motor control training?
- 2011
-
Ingår i: Physiotherapy. - 0031-9406 .- 1873-1465. ; 97:Suppl. 1, s. eS124-eS125
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: The aim of this study was to explore variables influencing success or failure of eight weeks of high load motor control training with the conventional deadlift exercise.Relevance: Researching viable exercises for rehabilitation of specific sub-groups of persistent low back pain is relevant for physical therapists in order to develop tailored treatment regimes for patients with persistent low back pain. This study contributes to this research by exploring which variables characterize the ideal patient for the conventional deadlift exercise.Participants: Thirty-five patients with persistent mechanical low back pain were recruited consecutively from two occupational health care services in Umeå, Sweden . Inclusion and exclusion criteria were designed to include patients with persistent mechanical low back pain.Methods: The study design was a prospective cohort study. The intervention consisted of eight weeks of training with the conventional deadlift exercise. To discriminate between patients with a successful or failed outcome of treatment, change in the patient-specific functional scale was used and a cut-off at 50 % improvement was set. Possible predictive variables collected at baseline included physical activity level, pain intensity (Visual Analogue Scale), activity limitation (the Roland and Morris Disability Questionnaire and the Patient-Specific Functional Scale), kinesiophobia (Tampa Scale of Kinesiophobia), specific anamnestic questions regarding patients' history and symptoms of low back pain, test of active movement control of the low back, trunk muscle endurance(Prone bridge test, Side-bridge test, Biering-Sörensen test) and lift strength (static two-hand lift test), two-point discrimination of the low back and ultrasound imaging of the mm. multifidi.Analysis: Student´s T-test for normally distributed continuous data, Mann Whitney for non-normally distributed continuous data and chi-square tests or Fisher´s Exact tests for categorical variables were used for analyses of differences between the success and the failure group.Results: No significant differences between groups were found in background, anamnestic or physical performance variables. After eight weeks of training, 15 patients (43 %) were categorized as treatment success and 20 patients (57 %) were categorized as treatment failure according to the cut-off set for the PSFS. The patients reported difficulty in performing a wide variation of activities, ranging from not being able to sit for longer than 15 minutes, to stand upright and watch their children play football games, and to not being able to run long distances, play football or perform different lifting tasks.Conclusions: We conclude that the conventional deadlift exercise may be considered a possible exercise to improve patients' activity limitations, if administered by a therapist experienced in resistance training and analyzing movement patterns. However, further research is needed to explore which variables can define patients in the successful and in the failure group, respectively.Implications: The results of this study imply that the conventional deadlift exercise can be used in treatment of patients with mechanical low back pain in order to increase activity limitation. However, it is still unclear on what grounds treatment with the conventional deadlift exercise is indicated to achieve these results.
|
|
| 36. |
|
|
| 37. |
- Berglund, Martina, et al.
(författare)
-
AFoU – a network for sustainable working life and development
- 2017
-
Ingår i: Proc. of the The Nordic Ergonomics and Society conference, NES-2017 ‘Joy at Work’, organized by Lund University (LTH) in association with the Ergonomics and Human Factors Society in Sweden (EHSS), and 20-23 August 2017, Sweden, Lund.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The aim of this paper is to describe and reflect on the development of the Swedish network AFoU (Workplace related R&D for sustainable working life). The overall goal with the network AFoU is to strengthen research contributing to sustainable working life, research that makes significant improvements, and future organizations characterized by competitiveness, quality and renewal through good working conditions. AFoU was started in 2015 and it consists of researchers from different disciplines, practitioners and representatives for unions and employer organizations. The network strives to combine high-quality research with practical use. This is achieved through collaboration between different stakeholders and across disciplines, thereby co-creating new knowledge that is needed to meet current and future demands.
|
|
| 38. |
- Berglund, Martina, et al.
(författare)
-
Boundary crossing in product introductions considering humans, technology and organization
- 2014
-
Ingår i: Proceedings of ODAM NES 2014. ; , s. 349-354
-
Konferensbidrag (refereegranskat)abstract
- The objective of the paper is to analyze how a product introduction involving Swedish-Chinese collaboration was influenced by human, technological and organizational aspects. The study showed that technical challenges concerned the infrastructure for communication and quality issues; organizational challenges concerned the new project model and updating drawing versions; and human related challenges included cultural differences and communication. The product introduction was highly challenging by crossing earlier boundaries in the human, technical, and organizational subsystems. Strong work demands were placed on the individuals while offering great opportunities for individual learning. Concurrent development of a new project model resulted in organizational learning.
|
|
| 39. |
- Berglund, Martina, et al.
(författare)
-
Challenges in a product introduction in a cross-cultural work system – a case study involving a Swedish and a Chinese company
- 2012
-
Konferensbidrag (refereegranskat)abstract
- The objective of this case study is to gain deeper insights in how cultural aspects influence a product introduction with product development carried out in Sweden and industrialization in China. Data were collected through semi-structured individual and group interviews and workshops. The study showed that the companies faced a number of challenges during the product introduction, such as problems with the product design, updating versions of drawings, infrastructure for communication, and quality issues. There were, however, a number of issues that were directly or indirectly influenced by cultural aspects and lack of understanding about cultural differences. Challenges included interpersonal communication related to language barriers and differences in degree of direct communication of needs, demands and own capabilities. Based on literature on cultural dimensions and actual challenges during a specific product introduction when two national cultures interact/collaborate, this paper results in an initial approach for further model development and research on how to link cultural dimensions to product development models in a systematic and prioritized way. This is needed to develop organizational support to increase knowledge of cultural strengths and differences, how to manage these issues and further facilitate organizational learning for increased efficiency of product introductions.
|
|
| 40. |
|
|
| 41. |
- Berglund, Martina, et al.
(författare)
-
INTERACTIVE RESEARCH IN PRODUCTION START-UP
- 2018
-
Konferensbidrag (refereegranskat)abstract
- Research regarding production start-ups hasincreased in interest during the last decades.However, there is still a need to learn more aboutsuitable research approaches in production startupsas the research need to be carried out in achallenging environment, where industrialpractitioners often have time-pressure, handlingevents and uncertainties related to both the productand the production system. This paper is based ona meta-analysis of four research projectsaddressing production start-ups including activitiesbefore, during and after the start-ups. Focus of thepaper is on how an interactive research approachcan be implemented to achieve learning andchange among individual practitioners, at grouplevel and at organizational level. The findings ofthe paper may contribute to increasedunderstanding of interactive research in dynamicprocesses and contribute to the development ofresearch on production start-ups.
|
|
| 42. |
- Berglund, Martina, et al.
(författare)
-
Interactive research in production start-up—application and outcomes
- 2020
-
Ingår i: Journal of Manufacturing Technology Management. - : Emerald Group Publishing Ltd.. - 1741-038X .- 1758-7786. ; 31:8, s. 1561-1581
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: The purpose of this paper is to reflect on interactive research as a means to create relevant knowledge in the domain of operations management in general and specifically in the context of production start-up. Design/methodology/approach: The reflection on the use of interactive research in production start-ups was based on a study of two completed interactive research projects. The lens for reflection was a framework including context, quality of relationship, quality of the research process itself and outcomes. Findings: The context was industrial manufacturing companies in Sweden, with different kind of challenges related to production start-ups, such as collaboration between involved functions and suppliers, competence development and work routines. Indicators of the quality of relationship between researchers and practitioners were initiated development activities and new collaboration between functions, within the company, between companies and in supply chains. The reflection of the quality of the research process itself was based on an interactive research process including four iterative steps with regular follow-ups allowing joint practitioner and researcher reflection on the progress. Identified outcomes included increased awareness and competence on how to deal with production start-ups, improvements of communication, work procedures and structures, better use of competences, increased cross-functional dialogue and cultural understanding. Practical implications: Implications for practitioners are the possibilities for knowledge creation through interactive collaboration in research projects enabling exchange between researchers from complementary fields and other companies dealing with production start-ups. Originality/value: The interactive research approach enables joint knowledge creation in a fast-changing context such as production start-ups as well as value-adding results both for practitioners in industry and for academia.
|
|
| 43. |
|
|
| 44. |
- Berglund, Martina, et al.
(författare)
-
Knowledge gained from product introduction and implications for organizational learning
- 2008
-
Konferensbidrag (refereegranskat)abstract
- Empirical findings from the automotive industry demonstrate that knowledge gained during a product introduction is mainly related to work procedures, personnel resources, education and training, verification, and responsibilities. However, this is to a large extent individually based. Examples of means to make this knowledge accessible to others include integrated work procedures and networking when knowledge is developed in a person-to-person situation as well codification of some knowledge. This is achieved through allocation of personnel resources and emphasis on organizational learning on the company agenda as well as in design of work procedures, which are management tasks and responsibilities.
|
|
| 45. |
- Berglund, Martina, et al.
(författare)
-
Knowledge transfer during personnel changes in manufacturing
- 2007
-
Konferensbidrag (refereegranskat)abstract
- This case based research addresses knowledge transfer when employees change positions or roles during planned changes within manufacturing. The studies demonstrate that these changes are common. Knowledge needed to transfer includes technical, human and organizational issues. Furthermore, there is a need to transfer knowledge during formal changes of position as well as temporary changes of roles. Organizational structures for knowledge transfer must therefore be developed for transfer of explicit and implicit knowledge in formal and informal settings. This may be achieved through a combination of codified explicit knowledge, organized networks and by creating opportunities for learning from work in practice.
|
|
| 46. |
- Berglund, Martina, et al.
(författare)
-
New ways of organizing product introductions
- 2012
-
Ingår i: Work. - : IOS Press. - 1051-9815 .- 1875-9270. ; 41, s. 4856-4861, s. 4856-4861
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this paper is to describe and reflect on an interactive research approach used to address the challenges on how to improve product introductions, the part of the product realization process associated with the transfer of a product from product development to serial production. In the interactive research approach, research results as well as improvement of practice are given equal importance. The collaboration between researchers and practitioners therefore addresses both the focus and the process of the change. The approach includes four main iterative steps: 1) mapping/diagnosis, 2) feedback of results, 3) participation in development activities, and 4) follow-up/evaluation. The paper reports findings from interactive research in one company within office product industry and one company group, consisting of three company units within the engine industry. Preliminary findings indicate that the participating companies afterwards work in a more structured way with product introductions and that the employees have gained deeper knowledge about product introductions as well as experienced the advantages of working across functional boundaries. Furthermore, the interactive research approach is suitable to run projects from an ergonomics perspective as it focuses on developing both practice and theory, it is human-centered, and it emphasizes broad participation from practitioners.
|
|
| 47. |
- Berglund, Martina, 1963-, et al.
(författare)
-
Scaling up and scaling down : Improvisational handling of critical work practices during the COVID-19 pandemic
- 2024
-
Ingår i: Management Learning. - : SAGE Publications Ltd. - 1350-5076 .- 1461-7307. ; 55, s. 305-
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this article is to explore improvisational handling of critical work practices during the COVID-19 pandemic and interpret these practices from a learning perspective. Based on an interview study with representatives of private, public and intermediary organisations, the study identified three different types of improvisational handling as responses to the pandemic crisis involving ‘scaling up’ and ‘scaling down’ critical work practices. By ‘scaling up’ and ‘scaling down’, we refer to practices for which, due to the pandemic, it has been imperative to urgently scale up an existing operational process or develop a new process, and alternatively extensively scale down or cease an existing process. The types of improvisational handling differed depending on the discretion of involved actors in terms of the extent to which the tasks, methods and/or results were given beforehand. These types of improvisational handling resulted in temporary solutions that may become permanent after the pandemic. The framework and model proposed in the article can be used as a tool to analyse and learn from the changes in work practices that have been set in motion during the pandemic. Such learning may improve the ability to cope with future extensive crises and other rapid change situations. © The Author(s) 2022.
|
|
| 48. |
- Berglund, M, et al.
(författare)
-
VERTICAL INFORMATION TRANSFER IN KNOWLEDGE INTENSE MANUFACTURING
- 2004
-
Konferensbidrag (refereegranskat)abstract
- The objective of this paper is to highlight vertical information transfer in relation to operator involvement in development work and to analyze the information channels utilized. A special focus is put on product, production, organisation and information system development. Data were collected in 14 Swedish companies through interviews with operators, production support, and production management. The study indicated a need of strategies for vertical information distribution. Verbal information channels are mostly used. However, formalized information transfer is needed to better utilize the operators’ knowledge and experience for development work as well as to provide personnel with relevant knowledge required for their work. Information flow may be simplified through IT-systems, intranet, documents and instructions, but it implies strong support from management and adapted working methods.
|
|
| 49. |
|
|
| 50. |
|
|
