| 1. |
|
|
| 2. |
- Aad, G., et al.
(författare)
-
The ATLAS Inner Detector commissioning and calibration
- 2010
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:3, s. 787-821
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS Inner Detector is a composite tracking system consisting of silicon pixels, silicon strips and straw tubes in a 2 T magnetic field. Its installation was completed in August 2008 and the detector took part in data-taking with single LHC beams and cosmic rays. The initial detector operation, hardware commissioning and in-situ calibrations are described. Tracking performance has been measured with 7.6 million cosmic-ray events, collected using a tracking trigger and reconstructed with modular pattern-recognition and fitting software. The intrinsic hit efficiency and tracking trigger efficiencies are close to 100%. Lorentz angle measurements for both electrons and holes, specific energy-loss calibration and transition radiation turn-on measurements have been performed. Different alignment techniques have been used to reconstruct the detector geometry. After the initial alignment, a transverse impact parameter resolution of 22.1 +/- 0.9 mu m and a relative momentum resolution sigma (p) /p=(4.83 +/- 0.16)x10(-4) GeV(-1)xp (T) have been measured for high momentum tracks.
|
|
| 3. |
- Abate, E., et al.
(författare)
-
Combined performance tests before installation of the ATLAS Semiconductor and Transition Radiation Tracking Detectors
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS (A Toroidal LHC ApparatuS) Inner Detector provides charged particle tracking in the centre of the ATLAS experiment at the Large Hadron Collider (LHC). The Inner Detector consists of three subdetectors: the Pixel Detector, the Semiconductor Tracker (SCT), and the Transition Radiation Tracker (TRT). This paper summarizes the tests that were carried out at the final stage of SCT+TRT integration prior to their installation in ATLAS. The combined operation and performance of the SCT and TRT barrel and endcap detectors was investigated through a series of noise tests, and by recording the tracks of cosmic rays. This was a crucial test of hardware and software of the combined tracker detector systems. The results of noise and cross-talk tests on the SCT and TRT in their final assembled configuration, using final readout and supply hardware and software, are reported. The reconstruction and analysis of the recorded cosmic tracks allowed testing of the offline analysis chain and verification of basic tracker performance parameters, such as efficiency and spatial resolution, in combined operation before installation.
|
|
| 4. |
- Abat, E., et al.
(författare)
-
A layer correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
- 2011
-
Ingår i: Journal of Instrumentation. - : Institute of Physics (IOP). - 1748-0221. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions impinging on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
|
|
| 5. |
- Abat, E., et al.
(författare)
-
Combined performance studies for electrons at the 2004 ATLAS combined test-beam
- 2010
-
Ingår i: Journal of Instrumentation. - : Institute of Physics (IOP). - 1748-0221. ; 5, s. P11006-
-
Tidskriftsartikel (refereegranskat)abstract
- In 2004 at the ATLAS (A Toroidal LHC ApparatuS) combined test beam, one slice of the ATLAS barrel detector (including an Inner Detector set-up and the Liquid Argon calorimeter) was exposed to particles from the H8 SPS beam line at CERN. It was the first occasion to test the combined electron performance of ATLAS. This paper presents results obtained for the momentum measurement p with the Inner Detector and for the performance of the electron measurement with the LAr calorimeter (energy E linearity and resolution) in the presence of a magnetic field in the Inner Detector for momenta ranging from 20 GeV/c to 100 GeV/c. Furthermore the particle identification capabilities of the Transition Radiation Tracker, Bremsstrahlungs-recovery algorithms relying on the LAr calorimeter and results obtained for the E/p ratio and a way how to extract scale parameters will be discussed.
|
|
| 6. |
- Abat, E., et al.
(författare)
-
Photon reconstruction in the ATLAS Inner Detector and Liquid Argon Barrel Calorimeter at the 2004 Combined Test Beam
- 2011
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- The reconstruction of photons in the ATLAS detector is studied with data taken during the 2004 Combined Test Beam, where a full slice of the ATLAS detector was exposed to beams of particles of known energy at the CERN SPS. The results presented show significant differences in the longitudinal development of the electromagnetic shower between converted and unconverted photons as well as in the total measured energy. The potential to use the reconstructed converted photons as a means to precisely map the material of the tracker in front of the electromagnetic calorimeter is also considered. All results obtained are compared with a detailed Monte-Carlo simulation of the test-beam setup which is based on the same simulation and reconstruction tools as those used for the ATLAS detector itself.
|
|
| 7. |
- Abdesselam, A., et al.
(författare)
-
Engineering for the ATLAS SemiConductor Tracker (SCT) end-cap
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS SemiConductor Tracker (SCT) is a silicon-strip tracking detector which forms part of the ATLAS inner detector. The SCT is designed to track charged particles produced in proton-proton collisions at the Large Hadron Collider (LHC) at CERN at an energy of 14 TeV. The tracker is made up of a central barrel and two identical end-caps. The barrel contains 2112 silicon modules, while each end-cap contains 988 modules. The overall tracking performance depends not only on the intrinsic measurement precision of the modules but also on the characteristics of the whole assembly, in particular, the stability and the total material budget. This paper describes the engineering design and construction of the SCT end-caps, which are required to support mechanically the silicon modules, supply services to them and provide a suitable environment within the inner detector. Critical engineering choices are highlighted and innovative solutions are presented - these will be of interest to other builders of large-scale tracking detectors. The SCT end-caps will be fully connected at the start of 2008. Further commissioning will continue, to be ready for proton-proton collision data in 2008.
|
|
| 8. |
- Abdesselam, A., et al.
(författare)
-
The ATLAS semiconductor tracker end-cap module
- 2007
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 575:3, s. 353-389
-
Tidskriftsartikel (refereegranskat)abstract
- The challenges for the tracking detector systems at the LHC are unprecedented in terms of the number of channels, the required read-out speed and the expected radiation levels. The ATLAS Semiconductor Tracker. (SCT) end-caps have a total of about 3 million electronics channels each reading out every 25 ns into its own on-chip 3.3 mu s buffer. The highest anticipated dose after 10 years operation is 1.4x10(14) cm(-2) in units of 1 MeV neutron equivalent (assuming the damage factors scale with the non-ionising energy loss). The forward tracker has 1976 double-sided modules, mostly of area similar to 70 cm(2), each having 2 x 768 strips read out by six ASICs per side. The requirement to achieve an average perpendicular radiation length of 1.5% X-0, while coping with up to 7 W dissipation per module (after irradiation), leads to stringent constraints on the thermal design. The additional requirement of 1500e(-) equivalent noise charge (ENC) rising to only 1800e(-) ENC after irradiation, provides stringent design constraints on both the high-density Cu/Polyimide flex read-out circuit and the ABCD3TA read-out ASICs. Finally, the accuracy of module assembly must not compromise the 16 mu m (r phi) resolution perpendicular to the strip directions or 580 mu m radial resolution coming from the 40 mrad front-back stereo angle. A total of 2210 modules were built to the tight tolerances and specifications required for the SCT. This was 234 more than the 1976 required and represents a yield of 93%. The component flow was at times tight, but the module production rate of 40-50 per week was maintained despite this. The distributed production was not found to be a major logistical problem and it allowed additional flexibility to take advantage of where the effort was available, including any spare capacity, for building the end-cap modules. The collaboration that produced the ATLAS SCT end-cap modules kept in close contact at all times so that the effects of shortages or stoppages at different sites could be rapidly resolved.
|
|
| 9. |
- Abdesselam, A., et al.
(författare)
-
The barrel modules of the ATLAS semiconductor tracker
- 2006
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 568:2, s. 642-671
-
Tidskriftsartikel (refereegranskat)abstract
- This paper describes the silicon microstrip modules in the barrel section of the SemiConductor Tracker (SCT) of the ATLAS experiment at the CERN Large Hadron Collider (LHC). The module requirements, components and assembly techniques are given, as well as first results of the module performance on the fully assembled barrels that make up the detector being installed in the ATLAS experiment.
|
|
| 10. |
- Poley, L., et al.
(författare)
-
The ABC130 barrel module prototyping programme for the ATLAS strip tracker
- 2020
-
Ingår i: Journal of Instrumentation. - : IOP PUBLISHING LTD. - 1748-0221. ; 15:9
-
Tidskriftsartikel (refereegranskat)abstract
- For the Phase-II Upgrade of the ATLAS Detector [1], its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100% silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-250) [2, 3] and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
|
|
| 11. |
|
|
| 12. |
- Solmi, M, et al.
(författare)
-
- 2022
-
Ingår i: Journal of affective disorders. - : Elsevier BV. - 1573-2517 .- 0165-0327. ; 299, s. 367-376
-
Tidskriftsartikel (refereegranskat)
|
|
| 13. |
- Wilson, J. A., et al.
(författare)
-
The optical links of the ATLAS SemiConductor tracker
- 2007
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 2, s. 1-28
-
Tidskriftsartikel (refereegranskat)abstract
- Optical links are used for the readout of the 4088 silicon microstrip modules that make up the SemiConductor Tracker of the ATLAS experiment at the CERN Large Hadron Collider (LHC). The optical link requirements are reviewed, with particular emphasis on the very demanding environment at the LHC. The on-detector components have to operate in high radiation levels for 10 years, with no maintenance, and there are very strict requirements on power consumption, material and space. A novel concept for the packaging of the on-detector optoelectronics has been developed to meet these requirements. The system architecture, including its redundancy features, is explained and the critical on-detector components are described. The results of the extensive Quality Assurance performed during all steps of the assembly are discussed.
|
|
| 14. |
- Acharya, B., et al.
(författare)
-
Search formagnetic monopoles with the MoEDAL prototype trapping detector in 8 TeV proton-proton collisions at the LHC
- 2016
-
Ingår i: Journal of High Energy Physics (JHEP). - 1126-6708 .- 1029-8479. ; :8
-
Tidskriftsartikel (refereegranskat)abstract
- The MoEDAL experiment is designed to search for magnetic monopoles and other highly-ionising particles produced in high-energy collisions at the LHC. The largely passive MoEDAL detector, deployed at Interaction Point 8 on the LHC ring, relies on two dedicated direct detection techniques. The first technique is based on stacks of nuclear-track detectors with surface area similar to 18 m(2), sensitive to particle ionisation exceeding a high threshold. These detectors are analysed offline by optical scanning microscopes. The second technique is based on the trapping of charged particles in an array of roughly 800 kg of aluminium samples. These samples are monitored offline for the presence of trapped magnetic charge at a remote superconducting magnetometer facility. We present here the results of a search for magnetic monopoles using a 160 kg prototype MoEDAL trapping detector exposed to 8TeV proton-proton collisions at the LHC, for an integrated luminosity of 0.75 fb(-1). No magnetic charge exceeding 0.5g(D) (where g(D) is the Dirac magnetic charge) is measured in any of the exposed samples, allowing limits to be placed on monopole production in the mass range 100 GeV <= m <= 3500 GeV. Model-independent cross-section limits are presented in fiducial regions of monopole energy and direction for 1g(D) <= vertical bar g vertical bar <= 6g(D), and model-dependent cross-section limits are obtained for Drell-Yan pair production of spin-1/2 and spin-0 monopoles for 1g(D) <= vertical bar g vertical bar <= 4g(D). Under the assumption of Drell-Yan cross sections, mass limits are derived for vertical bar g vertical bar = 2g(D) and vertical bar g vertical bar = 3g(D) for the first time at the LHC, surpassing the results from previous collider experiments.
|
|
| 15. |
|
|
| 16. |
- Amelino-Camelia, G., et al.
(författare)
-
Physics with the KLOE-2 experiment at the upgraded DA Phi NE
- 2010
-
Ingår i: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 68:3-4, s. 619-681
-
Forskningsöversikt (refereegranskat)abstract
- Investigation at a f-factory can shed light on several debated issues in particle physics. We discuss: (i) recent theoretical development and experimental progress in kaon physics relevant for the Standard Model tests in the flavor sector, (ii) the sensitivity we can reach in probing CPT and Quantum Mechanics from time evolution of entangled-kaon states, (iii) the interest for improving on the present measurements of non-leptonic and radiative decays of kaons and eta/eta' mesons, (iv) the contribution to understand the nature of light scalar mesons, and (v) the opportunity to search for narrow di-lepton resonances suggested by recent models proposing a hidden dark-matter sector. We also report on the e(+)e(-) physics in the continuum with the measurements of (multi) hadronic cross sections and the study of gamma gamma processes.
|
|
| 17. |
- Gonzalez-Sevilla, S., et al.
(författare)
-
A double-sided silicon micro-strip Super-Module for the ATLAS Inner Detector upgrade in the High-Luminosity LHC
- 2014
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 9, s. P02003-
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS experiment is a general purpose detector aiming to fully exploit the discovery potential of the Large Hadron Collider (LHC) at CERN. It is foreseen that after several years of successful data-taking, the LHC physics programme will be extended in the so-called High-Luminosity LHC, where the instantaneous luminosity will be increased up to 5 x 10(34) cm(-2) s(-1). For ATLAS, an upgrade scenario will imply the complete replacement of its internal tracker, as the existing detector will not provide the required performance due to the cumulated radiation damage and the increase in the detector occupancy. The current baseline layout for the new ATLAS tracker is an all-silicon-based detector, with pixel sensors in the inner layers and silicon micro-strip detectors at intermediate and outer radii. The super-module is an integration concept proposed for the strip region of the future ATLAS tracker, where double-sided stereo silicon micro-strip modules are assembled into a low-mass local support structure. An electrical super-module prototype for eight double-sided strip modules has been constructed. The aim is to exercise the multi-module readout chain and to investigate the noise performance of such a system. In this paper, the main components of the current super-module prototype are described and its electrical performance is presented in detail.
|
|
| 18. |
- Diez, S., et al.
(författare)
-
A double-sided, shield-less stave prototype for the ATLAS Upgrade strip tracker for the High Luminosity LHC
- 2014
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 9, s. P03012-
-
Tidskriftsartikel (refereegranskat)abstract
- A detailed description of the integration structures for the barrel region of the silicon strips tracker of the ATLAS Phase-II upgrade for the upgrade of the Large Hadron Collider, the so-called High Luminosity LHC (HL-LHC), is presented. This paper focuses on one of the latest demonstrator prototypes recently assembled, with numerous unique features. It consists of a shortened, shield-less, and double sided stave, with two candidate power distributions implemented. Thermal and electrical performances of the prototype are presented, as well as a description of the assembly procedures and tools.
|
|
| 19. |
- Abend, Sven, et al.
(författare)
-
Terrestrial very-long-baseline atom interferometry : Workshop summary
- 2024
-
Ingår i: AVS Quantum Science. - : American Institute of Physics (AIP). - 2639-0213. ; 6:2
-
Forskningsöversikt (refereegranskat)abstract
- This document presents a summary of the 2023 Terrestrial Very-Long-Baseline Atom Interferometry Workshop hosted by CERN. The workshop brought together experts from around the world to discuss the exciting developments in large-scale atom interferometer (AI) prototypes and their potential for detecting ultralight dark matter and gravitational waves. The primary objective of the workshop was to lay the groundwork for an international TVLBAI proto-collaboration. This collaboration aims to unite researchers from different institutions to strategize and secure funding for terrestrial large-scale AI projects. The ultimate goal is to create a roadmap detailing the design and technology choices for one or more kilometer--scale detectors, which will be operational in the mid-2030s. The key sections of this report present the physics case and technical challenges, together with a comprehensive overview of the discussions at the workshop together with the main conclusions.
|
|
| 20. |
- Bates, R. L., et al.
(författare)
-
The ATLAS SCT grounding and shielding concept and implementation
- 2012
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 7, s. P03005-
-
Tidskriftsartikel (refereegranskat)abstract
- This paper describes the design and implementation of the grounding and shielding system for the ATLAS SemiConductor Tracker (SCT). The mitigation of electromagnetic interference and noise pickup through power lines is the critical design goal as they have the potential to jeopardize the electrical performance. We accomplish this by adhering to the ATLAS grounding rules, by avoiding ground loops and isolating the different subdetectors. Noise sources are identified and design rules to protect the SCT against them are described. A rigorous implementation of the design was crucial to achieve the required performance. This paper highlights the location, connection and assembly of the different components that affect the grounding and shielding system: cables, filters, cooling pipes, shielding enclosure, power supplies and others. Special care is taken with the electrical properties of materials and joints. The monitoring of the grounding system during the installation period is also discussed. Finally, after connecting more than four thousand SCT modules to all of their services, electrical, mechanical and thermal within the wider ATLAS experimental environment, dedicated tests show that noise pickup is minimised.
|
|
| 21. |
- Cruz, Raquel, et al.
(författare)
-
Novel genes and sex differences in COVID-19 severity
- 2022
-
Ingår i: Human Molecular Genetics. - : Oxford University Press. - 0964-6906 .- 1460-2083. ; 31:22, s. 3789-3806
-
Tidskriftsartikel (refereegranskat)abstract
- Here, we describe the results of a genome-wide study conducted in 11 939 coronavirus disease 2019 (COVID-19) positive cases with an extensive clinical information that were recruited from 34 hospitals across Spain (SCOURGE consortium). In sex-disaggregated genome-wide association studies for COVID-19 hospitalization, genome-wide significance (P < 5 × 10−8) was crossed for variants in 3p21.31 and 21q22.11 loci only among males (P = 1.3 × 10−22 and P = 8.1 × 10−12, respectively), and for variants in 9q21.32 near TLE1 only among females (P = 4.4 × 10−8). In a second phase, results were combined with an independent Spanish cohort (1598 COVID-19 cases and 1068 population controls), revealing in the overall analysis two novel risk loci in 9p13.3 and 19q13.12, with fine-mapping prioritized variants functionally associated with AQP3 (P = 2.7 × 10−8) and ARHGAP33 (P = 1.3 × 10−8), respectively. The meta-analysis of both phases with four European studies stratified by sex from the Host Genetics Initiative (HGI) confirmed the association of the 3p21.31 and 21q22.11 loci predominantly in males and replicated a recently reported variant in 11p13 (ELF5, P = 4.1 × 10−8). Six of the COVID-19 HGI discovered loci were replicated and an HGI-based genetic risk score predicted the severity strata in SCOURGE. We also found more SNP-heritability and larger heritability differences by age (<60 or ≥60 years) among males than among females. Parallel genome-wide screening of inbreeding depression in SCOURGE also showed an effect of homozygosity in COVID-19 hospitalization and severity and this effect was stronger among older males. In summary, new candidate genes for COVID-19 severity and evidence supporting genetic disparities among sexes are provided.
|
|
| 22. |
|
|
| 23. |
- Aliev, M., et al.
(författare)
-
A forward silicon strip system for the ATLAS HL-LHC upgrade
- 2013
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 730, s. 210-214
-
Tidskriftsartikel (refereegranskat)abstract
- In the year 2022 an upgrade of the Large Hadron Collider (LHC) is planned to increase the luminosity such that an integrated luminosity of L-int similar to 3000 fb(-1) can be accumulated by 2030 [1]. The radiation damage of the present inner tracker at this date and the high track density of the High Luminosity LHC (HL-LHC) require an upgrade of the inner tracker of the ATLAS (A Toroidal LHC ApparatuS) experiment. A new integration concept will be used: the readout electronics is directly glued on the strip surface of the silicon sensors and the sensors are glued to a support structure. For the barrel region this structure is referred to as a Stave and for the end-cap region it is referred to as a Petal. For tests a smaller version, the Petalet, will be build with two design concepts. In this article the construction method is explained and first hybrid test results for one Petalet sensor are presented.
|
|
| 24. |
- Babusci, D., et al.
(författare)
-
Direct tests of T, CP, CPT symmetries in transitions of neutral K mesons with the KLOE experiment
- 2023
-
Ingår i: Physics Letters B. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 845
-
Tidskriftsartikel (refereegranskat)abstract
- Tests of the T, CP and CPT symmetries in the neutral kaon system are performed by the direct comparison of the probabilities of a kaon transition process to its symmetry-conjugate. The exchange of in and out states required for a genuine test involving an antiunitary transformation implied by time-reversal is implemented exploiting the entanglement of K0K0 pairs produced at a 0 -factory.A data sample collected by the KLOE experiment at DAONE corresponding to an integrated luminosity of about 1.7 fb-1 is analysed to study the At distributions of the 0 -> KSKL -> pi+pi- pi +/- e -/+ v and 0 -> KSKL -> pi +/- e -/+ v3 pi 0 processes, with At the difference of the kaon decay times. A comparison of the measured At distributions in the asymptotic region At â … iS allows to test for the first time T and CPT symmetries in kaon transitions with a precision of few percent, and to observe CP violation with this novel method.
|
|
| 25. |
- Benitez, V., et al.
(författare)
-
Sensors for the End-cap prototype of the Inner Tracker in the ATLAS Detector Upgrade
- 2016
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 833, s. 226-232
-
Tidskriftsartikel (refereegranskat)abstract
- The new silicon microstrip sensors of the End-cap part of the HL-LHC ATLAS Inner Tracker (ITk) present a number of challenges due to their complex design features such as the multiple different sensor shapes, the varying strip pitch, or the built-In stereo angle. In order to investigate these specific problems, the "petalet" prototype was defined as a small End-cap prototype. The sensors for the petalet prototype include several new layout and technological solutions to investigate the issues, they have been tested in detail by the collaboration. The sensor description and detailed test results are presented in this paper. New software tools have been developed for the automatic layout generation of the complex designs. The sensors have been fabricated, characterized and delivered to the institutes in the collaboration for their assembly on petalet prototypes. This paper describes the lessons learnt from the design and tests of the new solutions implemented on these sensors, which are being used for the full petal sensor development. This has resulted in the ITIc strip, community acquiring the necessary expertise to develop the full End-cap structure, the petal.
|
|
| 26. |
|
|
| 27. |
|
|
| 28. |
|
|
| 29. |
|
|
| 30. |
|
|
| 31. |
|
|
| 32. |
|
|
| 33. |
|
|
| 34. |
|
|
| 35. |
|
|
| 36. |
- Martinez-Assucena, A., et al.
(författare)
-
Rehabilitation for multiple sclerosis, in adults (II); management and impact on impairment, functioning, and quality of life : An overview
- 2010
-
Ingår i: Critical Reviews in Physical and Rehabilitation Medicine. - 0896-2960. ; 22:1-4, s. 179-240
-
Tidskriftsartikel (refereegranskat)abstract
- Multiple sclerosis (MS) often leads to different levels of severity and progression of impairment and disability and to dissimilar levels of limitation in activities and participation in different social domains, with varying impacts on quality of life (QoL) among people with MS (PwMS). Results have shown that, for PwMS, prioritizing goal setting may enhance adherence to treatment. Interdisciplinary rehabilitation may prolong the functional status level of PwMS, may result in transient improvement in the aspects of impairment features, may increase their participation in activities, and may improve their QoL, even when disease progression is not modified. Single rehabilitation packages of comprehensive care have proven beneficial, such as physiotherapy, which enhances aerobic capacity, strength, pain, mood, mobility, and QoL. Occupational therapy can help reduce the impact of impairment on QoL, especially fatigue. Neuropsychological interventions, such as learning and memory remediation, psychological intervention for depressive disorders, and acquistion of coping skills and self-management techniques help PwMS to adjust to disease and disability. Speech therapy can improve intelligibility of communication. Learning swallowing techniques can help prevent material from entering the airway. Clean intermittent self-catheterization can help prevent urinary tract infections. Power wheelchairs enhance occupational performance and energy conservation. Further vocational rehabilitation settings and research are required for more appropriate interventions due to high unemployment rates among PwMS. Comprehensive care for PwMS should include planning for future independent living and long-term care needs.
|
|
| 37. |
- Ruggeri, Kai, et al.
(författare)
-
The general fault in our fault lines
- 2021
-
Ingår i: Nature Human Behaviour. - : Springer Nature. - 2397-3374. ; 5:10, s. 1369-1380
-
Tidskriftsartikel (refereegranskat)abstract
- Pervading global narratives suggest that political polarization is increasing, yet the accuracy of such group meta-perceptions has been drawn into question. A recent US study suggests that these beliefs are inaccurate and drive polarized beliefs about out-groups. However, it also found that informing people of inaccuracies reduces those negative beliefs. In this work, we explore whether these results generalize to other countries. To achieve this, we replicate two of the original experiments with 10,207 participants across 26 countries. We focus on local group divisions, which we refer to as fault lines. We find broad generalizability for both inaccurate meta-perceptions and reduced negative motive attribution through a simple disclosure intervention. We conclude that inaccurate and negative group meta-perceptions are exhibited in myriad contexts and that informing individuals of their misperceptions can yield positive benefits for intergroup relations. Such generalizability highlights a robust phenomenon with implications for political discourse worldwide.
|
|
| 38. |
|
|
| 39. |
|
|
| 40. |
- Casanueva, Felipe F., et al.
(författare)
-
Criteria for the definition of Pituitary Tumor Centers of Excellence (PTCOE): A Pituitary Society Statement
- 2017
-
Ingår i: Pituitary. - : Springer Science and Business Media LLC. - 1386-341X .- 1573-7403. ; 20, s. 489-498
-
Forskningsöversikt (refereegranskat)abstract
- © 2017, The Author(s). Introduction: With the goal of generate uniform criteria among centers dealing with pituitary tumors and to enhance patient care, the Pituitary Society decided to generate criteria for developing Pituitary Tumors Centers of Excellence (PTCOE). Methods: To develop that task, a group of ten experts served as a Task Force and through two years of iterative work an initial draft was elaborated. This draft was discussed, modified and finally approved by the Board of Directors of the Pituitary Society. Such document was presented and debated at a specific session of the Congress of the Pituitary Society, Orlando 2017, and suggestions were incorporated. Finally the document was distributed to a large group of global experts that introduced further modifications with final endorsement. Results: After five years of iterative work a document with the ideal criteria for a PTCOE is presented. Conclusions: Acknowledging that very few centers in the world, if any, likely fulfill the requirements here presented, the document may be a tool to guide improvements of care delivery to patients with pituitary disorders. All these criteria must be accommodated to the regulations and organization of Health of a given country.
|
|
| 41. |
- Dahl, Martin, 1984-, et al.
(författare)
-
A 2,000-Year Record of Eelgrass (Zostera marina L.) : Colonization Shows Substantial Gains in Blue Carbon Storage and Nutrient Retention
- 2024
-
Ingår i: Global Biogeochemical Cycles. - : John Wiley & Sons. - 0886-6236 .- 1944-9224. ; 38:3
-
Tidskriftsartikel (refereegranskat)abstract
- Assessing historical environmental conditions linked to habitat colonization is important for understanding long-term resilience and improving conservation and restoration efforts. Such information is lacking for the seagrass Zostera marina, an important foundation species across cold-temperate coastal areas of the Northern Hemisphere. Here, we reconstructed environmental conditions during the last 14,000 years from sediment cores in two eelgrass (Z. marina) meadows along the Swedish west coast, with the main aims to identify the time frame of seagrass colonization and describe subsequent biogeochemical changes following establishment. Based on vegetation proxies (lipid biomarkers), eelgrass colonization occurred about 2,000 years ago after geomorphological changes that resulted in a shallow, sheltered environment favoring seagrass growth. Seagrass establishment led to up to 20- and 24-fold increases in sedimentary carbon and nitrogen accumulation rates, respectively. This demonstrates the capacity of seagrasses as efficient ecosystem engineers and their role in global change mitigation and adaptation through CO2 removal, and nutrient and sediment retention. By combining regional climate projections and landscape models, we assessed potential climate change effects on seagrass growth, productivity and distribution until 2100. These predictions showed that seagrass meadows are mostly at risk from increased sedimentation and hydrodynamic changes, while the impact from sea level rise alone might be of less importance in the studied area. This study showcases the positive feedback between seagrass colonization and environmental conditions, which holds promise for successful conservation and restoration efforts aimed at supporting climate change mitigation and adaptation, and the provision of several other crucial ecosystem services. © 2024. The Authors.
|
|
| 42. |
|
|
| 43. |
- Solmi, Marco, et al.
(författare)
-
Physical and mental health impact of COVID-19 on children, adolescents, and their families :
- 2022
-
Ingår i: Journal of Affective Disorders. - : Elsevier. - 0165-0327 .- 1573-2517. ; 299, s. 367-376
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The COVID-19 pandemic has altered daily routines and family functioning, led to closing schools, and dramatically limited social interactions worldwide. Measuring its impact on mental health of vulnerable children and adolescents is crucial. Methods: The Collaborative Outcomes study on Health and Functioning during Infection Times (COH-FIT - www. coh-fit.com) is an on-line anonymous survey, available in 30 languages, involving >230 investigators from 49 countries supported by national/international professional associations. COH-FIT has thee waves (until the pandemic is declared over by the WHO, and 6-18 months plus 24-36 months after its end). In addition to adults, COH-FIT also includes adolescents (age 14-17 years), and children (age 6-13 years), recruited via nonprobability/snowball and representative sampling and assessed via self-rating and parental rating. Nonmodifiable/modifiable risk factors/treatment targets to inform prevention/intervention programs to promote health and prevent mental and physical illness in children and adolescents will be generated by COH-FIT. Co primary outcomes are changes in well-being (WHO-5) and a composite psychopathology P-Score. Multiple behavioral, family, coping strategy and service utilization factors are also assessed, including functioning and quality of life. Results: Up to June 2021, over 13,000 children and adolescents from 59 countries have participated in the COHFIT project, with representative samples from eleven countries. Limitations: Cross-sectional and anonymous design. Conclusions: Evidence generated by COH-FIT will provide an international estimate of the COVID-19 effect on childrens, adolescents and families, mental and physical health, well-being, functioning and quality of life, informing the formulation of present and future evidence-based interventions and policies to minimize adverse effects of the present and future pandemics on youth.
|
|
| 44. |
- Solmi, Marco, et al.
(författare)
-
The collaborative outcomes study on health and functioning during infection times in adults (COH-FIT-Adults) : Design and methods of an international online survey targeting physical and mental health effects of the COVID-19 pandemic
- 2022
-
Ingår i: Journal of Affective Disorders. - : Elsevier. - 0165-0327 .- 1573-2517. ; 299, s. 393-407
-
Tidskriftsartikel (refereegranskat)abstract
- Background: . High-quality comprehensive data on short-/long-term physical/mental health effects of the COVID-19 pandemic are needed. Methods: . The Collaborative Outcomes study on Health and Functioning during Infection Times (COH-FIT) is an international, multi-language (n=30) project involving >230 investigators from 49 countries/territories/regions, endorsed by national/international professional associations. COH-FIT is a multi-wave, on-line anonymous, cross-sectional survey [wave 1: 04/2020 until the end of the pandemic, 12 months waves 2/3 starting 6/24 months threreafter] for adults, adolescents (14-17), and children (6-13), utilizing non-probability/snowball and representative sampling. COH-FIT aims to identify non-modifiable/modifiable risk factors/treatment targets to inform prevention/intervention programs to improve social/health outcomes in the general population/vulnerable subgrous during/after COVID-19. In adults, co-primary outcomes are change from pre-COVID-19 to intra-COVID-19 in well-being (WHO-5) and a composite psychopathology P-Score. Key secondary outcomes are a P-extended score, global mental and physical health. Secondary outcomes include health-service utilization/ functioning, treatment adherence, functioning, symptoms/behaviors/emotions, substance use, violence, among others. Results: . Starting 04/26/2020, up to 14/07/2021 >151,000 people from 155 countries/territories/regions and six continents have participated. Representative samples of >= 1,000 adults have been collected in 15 countries. Overall, 43.0% had prior physical disorders, 16.3% had prior mental disorders, 26.5% were health care workers, 8.2% were aged >= 65 years, 19.3% were exposed to someone infected with COVID-19, 76.1% had been in quarantine, and 2.1% had been COVID 19-positive. Limitations: . Cross-sectional survey, preponderance of non-representative participants. Conclusions: . Results from COH-FIT will comprehensively quantify the impact of COVID-19, seeking to identify high-risk groups in need for acute and long-term intervention, and inform evidence-based health policies/strategies during this/future pandemics.
|
|
| 45. |
- Solmi, Marco, et al.
(författare)
-
Validation of the Collaborative Outcomes study on Health and Functioning during Infection Times (COH-FIT) questionnaire for adults
- 2023
-
Ingår i: Journal of Affective Disorders. - : ELSEVIER. - 0165-0327 .- 1573-2517. ; 326, s. 249-261
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The Collaborative Outcome study on Health and Functioning during Infection Times (COH-FIT; www.coh-fit.com) is an anonymous and global online survey measuring health and functioning during the COVID-19 pandemic. The aim of this study was to test concurrently the validity of COH-FIT items and the in-ternal validity of the co-primary outcome, a composite psychopathology "P-score". Methods: The COH-FIT survey has been translated into 30 languages (two blind forward-translations, consensus, one independent English back-translation, final harmonization). To measure mental health, 1-4 items ("COH-FIT items") were extracted from validated questionnaires (e.g. Patient Health Questionnaire 9). COH-FIT items measured anxiety, depressive, post-traumatic, obsessive-compulsive, bipolar and psychotic symptoms, as well as stress, sleep and concentration. COH-FIT Items which correlated r >= 0.5 with validated companion question-naires, were initially retained. A P-score factor structure was then identified from these items using exploratory factor analysis (EFA) and confirmatory factor analyses (CFA) on data split into training and validation sets. Consistency of results across languages, gender and age was assessed. Results: From >150,000 adult responses by May 6th, 2022, a subset of 22,456 completed both COH-FIT items and validated questionnaires. Concurrent validity was consistently demonstrated across different languages for COH-FIT items. CFA confirmed EFA results of five first-order factors (anxiety, depression, post-traumatic, psychotic, psychophysiologic symptoms) and revealed a single second-order factor P-score, with high internal reliability (omega = 0.95). Factor structure was consistent across age and sex. Conclusions: COH-FIT is a valid instrument to globally measure mental health during infection times. The P-score is a valid measure of multidimensional mental health.
|
|
| 46. |
|
|
