1. |
- Bhatti, Adeel Liaquat, et al.
(författare)
-
Facile doping of nickel into Co3O4 nanostructures to make them efficient for catalyzing the oxygen evolution reaction
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:22, s. 12962-12969
-
Tidskriftsartikel (refereegranskat)abstract
- Designing a facile and low-cost methodology to fabricate earth-abundant catalysts is very much needed for a wide range of applications. Herein, a simple and straightforward approach was developed to tune the electronic properties of cobalt oxide nanostructures by doping them with nickel and then using them to catalyze the oxygen evolution reaction (OER) in an aqueous solution of 1.0 M KOH. The addition of a nickel impurity improved the conductivity of the cobalt oxide, and further increased its activity towards the OER. Analytical techniques such as scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and powder X-ray diffraction (XRD) were used to investigate, respectively, the morphology, composition and crystalline structure of the materials used. The nickel-doped cobalt oxide material showed randomly oriented nanowires and a high density of nanoparticles, exhibited the cubic phase, and contained cobalt, nickel and oxygen as its main elements. The nickel-doped cobalt oxide also yielded a Tafel slope of 82 mV dec(-1) and required an overpotential of 300 mV to reach a current density of 10 mA cm(-2). As an OER catalyst, it was shown to be durable for 40 h. Electrochemical impedance spectroscopy (EIS) analysis showed a low charge-transfer resistance of 177.5 ohms for the nickel-doped cobalt oxide, which provided a further example of its excellent OER performance. These results taken together indicated that nickel doping of cobalt oxide can be accomplished via a facile approach and that the product of this doping can be used for energy and environmental applications.
|
|
2. |
- Bhatti, Muhammad Ali, et al.
(författare)
-
Enzymes and phytochemicals from neem extract robustly tuned the photocatalytic activity of ZnO for the degradation of malachite green (MG) in aqueous media
- 2021
-
Ingår i: Research on chemical intermediates (Print). - : SPRINGER. - 0922-6168 .- 1568-5675. ; 47:4, s. 1581-1599
-
Tidskriftsartikel (refereegranskat)abstract
- The malachite green (MG) is very difficult to degrade in water; thus, it needs an efficient photocatalyst. In this study, neem extract was used to tune the surface and crystal properties of ZnO nanostructures for the photodegradation of MG. The biosynthesized ZnO samples were prepared by hydrothermal method in the presence of 5, 10 and 15 mL of neem extract. The structural characterization has shown nanoparticle like morphology of ZnO as revealed by scanning electron microscopy (SEM) and hexagonal phase was confirmed by powder X-ray diffraction (XRD) technique. The XRD analysis has shown a shift in the 2 theta towards lower angle for ZnO with increasing amount of neem extract. Also, the crystallite particle size of ZnO was decreased with increasing neem extract. The UV-visible spectroscopy has shown the decrease in the optical band gap of ZnO, and the lowest band gap is possessed by ZnO sample produced with 15 mL of neem extract. The ZnO sample obtained with 15 mL of neem extract has shown approximately 99% degradation efficiency for MG for 70 min in aqueous solution. The superior photocatalytic activity of ZnO sample with 15 mL of neem extract could be attributed from the decrease in charge recombination rate due to the decreased optical band gap and particle size.
|
|
3. |
- Bhatti, Muhammad Ali, et al.
(författare)
-
Low Temperature Aqueous Chemical Growth Method for the Doping of W into ZnO Nanostructures and Their Photocatalytic Role in the Degradration of Methylene Blue
- 2022
-
Ingår i: Journal of cluster science. - : SPRINGER/PLENUM PUBLISHERS. - 1040-7278 .- 1572-8862. ; 33:4, s. 1445-1456
-
Tidskriftsartikel (refereegranskat)abstract
- In this research work, we have produced tungsten (W) doped ZnO nanostructures via low-temperature aqueous chemical growth method. The morphology, crystal arrays and composition was investigated by scanning electron microscopy (SEM), powder X-ray diffraction (XRD) and energy dispersive X-rays (EDX) respectively. The SEM results indicate the nanowire morphology before and after the doping of W into ZnO and XRD study has shown the hexagonal crystallography of W doped ZnO samples. The EDX study has confirmed the successful doping of W into ZnO crystal lattices. The photodegradation performance of methylene blue was evaluated with W doped ZnO samples and pristine ZnO in aqueous solution. The measured degradation efficiencies for the different W doped ZnO samples were 5 wt%, 10 wt%, 15 wt% and 20 wt% at pH 5 are 87.8%, 92.3%, 92.8% and 96.9%), at pH 9 (72.1%, 90.7%, 92.1%, and 96.4%) and at pH 11 (80%, 85%, 87% and 89%) for the time interval of 90 min respectively. The pH of dye solution has significant effect on the degradation efficiency. These findings show that the W doped ZnO samples have superior degradation efficiency of 96.6% in a very short interval of time. The swift degradation kinetics for the W doped ZnO samples is attributed to the reduction in the energy band gap, decrease in particle size, enhanced surface area, decrease in the recombination rate and foster charge separation process. The obtained results are exciting and providing efficient earth-abundant photocatalysts for the energy and environmental purposes.Kindly confirm the Given names and Family names for all the authors.They are correct.
|
|
4. |
- Bhatti, Muhammad Ali, et al.
(författare)
-
TiO2/ZnO Nanocomposite Material for Efficient Degradation of Methylene Blue
- 2021
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2511-2519
-
Tidskriftsartikel (refereegranskat)abstract
- In this research work, we have produced a composite material consisting titanium dioxide (TiO2) and zinc oxide (ZnO) nanostructures via precipitation method. Scanning electron microscopy (SEM) study has shown the mixture of nanostructures consisting nanorods and nano flower. Energy dispersive spectroscopy (EDS) study has confirmed the presence of Ti, Zn and O as main elements in the composite. X-ray diffraction (XID) study has revealed that the successful presence of TiO2 and ZnO in the composite. The composite material exhibits small optical energy band gap which led to reduction of the charge recombination rate of electron-hole pairs. The band gap for the composite TiO2/ZnO samples namely 1, 2, 3 and 4 is 3.18, 3.00, 2.97 and 2.83 eV respectively. Small optical bandgap gives less relaxation time for the recombination of electron and hole pairs, thus favorable photodegradation is found. The degradation efficiency for the TiO2/ZnO samples for methylene blue in order of 55.03%, 75.7%, 85.14% and 90.08% is found for the samples 1, 2, 3 and 4 respectively. The proposed study of titanium dioxide addition into ZnO is facile and inexpensive for the development of efficient photocatalysts. This can be capitalized at large scale for the energy and environmental applications.
|
|
5. |
- Kumar, Shusheel, et al.
(författare)
-
Transforming NiCo2O4 nanorods into nanoparticles using citrus lemon juice enhancing electrochemical properties for asymmetric supercapacitor and water oxidation
- 2023
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 13:27, s. 18614-18626
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, the nanostructured nickel–cobalt bimetallic oxide (NiCo2O4) material with high electrochemical activity has received intensive attention. Beside this, the biomass assisted synthesis of NiCo2O4 is gaining popularity due to its advantageous features such as being low cost, simplicity, minimal use of toxic chemicals, and environment-friendly and ecofriendly nature. The electrochemical activity of spinel NiCo2O4 is associated with its mixed metal oxidation states. Therefore, much attention has been paid to the crystal quality, morphology and tunable surface chemistry of NiCo2O4 nanostructures. In this study, we have used citrus lemon juice consisting of a variety of chemical compounds having the properties of a stabilizing agent, capping agent and chelating agent. Moreover, the presence of several acidic chemical compounds in citrus lemon juice changed the pH of the growth solution and consequently we observed surface modified and structural changes that were found to be very effective for the development of energy conversion and energy storage systems. These naturally occurring compounds in citrus lemon juice played a dynamic role in transforming the nanorod morphology of NiCo2O4 into small and well-packed nanoparticles. Hence, the prepared NiCo2O4 nanostructures exhibited a new surface-oriented nanoparticle morphology, high concentration of defects on the surface (especially oxygen vacancies), sufficient ionic diffusion and reaction of electrolytic ions, enhanced electrical conductivity, and favorable reaction kinetics at the interface. The electrocatalytic properties of the NiCo2O4 nanostructures were studied in oxygen evolution reaction (OER) at a low overpotential of 250 mV for 10 mA cm−2, Tafel slope of 98 mV dec−1, and durability of 40 h. Moreover, an asymmetric supercapacitor was produced and the obtained results indicated a high specific capacitance of (Cs) of 1519.19 F g−1, and energy density of 33.08 W h kg−1 at 0.8 A g−1. The enhanced electrochemical performance could be attributed to the favorable structural changes, surface modification, and surface crystal facet exposure due to the use of citrus lemon juice. The proposed method of transformation of nanorod to nanoparticles could be used for the design of a new generation of efficient electrocatalyst materials for energy storage and conversion uses.
|
|
6. |
- Mugheri, Abdul Qayoom, et al.
(författare)
-
Chemically Coupled Cobalt Oxide Nanosheets Decorated onto the Surface of Multiwall Carbon Nanotubes for Favorable Oxygen Evolution Reaction
- 2021
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2660-2667
-
Tidskriftsartikel (refereegranskat)abstract
- Cobalt oxide has been widely investigated among potential transition metal oxides for the electrochemical energy conversion, storage, and water splitting. However, they have inherently low electronic conductivity and high corrosive nature in alkaline media. Herein, we propose a promising and facile approach to improve the conductivity and charge transport of cobalt oxide Co3O4 through chemical coupling with well-dispersed multiwall carbon nanotubes (MWCNTs) during hydrothermal treatment. The morphology of prepared composite material consisting of nanosheets which are anchored on the MWCNTs as confirmed by scanning electron microscopy (SEM). A cubic crystalline system is exhibited by the cobalt oxide as confirmed by the X-ray diffraction study. The Co, O, and C are the only elements present in the composite material. FTIR study has indicated the successful coupling of cobalt oxide with MWCNTs. The chemically coupled cobalt oxide onto the surface of MWCNTs composite is found highly active towards oxygen evolution reaction (OER) with a low onset potential 1.44 V versus RHE, low overpotential 262 mV at 10 mAcm(-2) and small Tafel slope 81 mV dec(-1). For continuous operation of 40 hours during durability test, no decay in activity was recorded. Electrochemical impedance study further revealed a low charge transfer resistance of 70.64 Ohms for the composite material during the electrochemical reaction and which strongly favored OER kinetics. This work provides a simple, low cost, and smartly designing electrocatalysts via hydrothermal reaction for the catalysis and energy storage applications.
|
|
7. |
- Shah, Aqeel Ahmed, et al.
(författare)
-
Tin as an Effective Doping Agent into ZnO for the Improved Photodegradation of Rhodamine B
- 2021
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2529-2537
-
Tidskriftsartikel (refereegranskat)abstract
- We have fabricated ZnO nano rods by hydrothermal method and successively doped them with tin (Sn) using different concentrations of 25, 50, 75 and 100 mg of tin chloride. XRD of the fabricated structures showed that ZnO possess hexagonal wurtzite phase. Scanning electron microscopy (SEM) was used to explore the morphology and it shows nanorod like morphology for all samples and no considerable change in the structural features were found. The dimension of nanorod is 200 to 300 nm. The doped materials were then investigated for their photo catalytic degradation of environmental pollutant Rhodamine B. The performance of doped ZnO is compared with the pristine ZnO. Scanning electron microscopy (SEM) was used to explore the morphology and it shows nanorod like morphology for all samples and no considerable change in the structural features were found. The dimension of nanorod is 200 to 300 nm. XRD of the fabricated structures showed that ZnO possess hexagonal wurtzite phase. Photo catalytic activity of rhodamine B was investigated under UV light and a maximum degradation efficiency of 85% was obtained. The optical property reveals the reduction in band gap of upto 17.14% for 100 mg Sn doped ZnO. The degradation is followed by the pseudo order kinetics. The produced results are unique in terms of facile synthesis of Sn doped ZnO and excellent photo degradation efficiency, therefore these materials can be used for other environmental applications.
|
|
8. |
- Ujan, Zaheer Ahmed, et al.
(författare)
-
The Crystal Disorder into ZnO with Addition of Bromine and Its Outperform Role in the Photodegradation of Methylene Blue
- 2022
-
Ingår i: Journal of cluster science. - : SPRINGER/PLENUM PUBLISHERS. - 1040-7278 .- 1572-8862. ; 33:1, s. 281-291
-
Tidskriftsartikel (refereegranskat)abstract
- In this research work, bromine (Br) is successfully doped into ZnO nanostructures using solvothermal method. The morphology, crystalline features, and composition of Br doped ZnO nanostructures were studied by scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive X ray spectroscopy (EDX) respectively. These newly prepared nanostructured materials were tested as photocatalysts for the photodegradation of methylene blue (MB) in aqueous solution under UV light. The kinetic rate constants were observed in the order (20% Br/ZnO > 15% Br/ZnO > 10% Br/ZnO > 5% Br/ZnO >pristine ZnO), thus they are indicating that the increasing Br dopant level has linear effect on the photodegradation of MB. The photocatalytic degradation efficiency of 60% was achieved for the pristine ZnO during the irradiation of UV light for 5 h, however 20% Br doped ZnO nanostructures has shown enhanced degradation efficiency of 97.63% during the irradiation of UV light for short interval of time of 2.2 h. The 20% Br/ZnO describes the highest rate constant value of (24.13 x 10(-3) min(-1)), for time period of 2.2 h and this values is about 8 and 4 times higher than the pristine ZnO (3.72 x 10(-3) min(-1)) and 5% Br/ZnO (6.13 x 10(-3) min(-1)), respectively. The obtained results of 20% Br doped ZnO sample are superior or equal in performance than the recently reported works. The catalytic mechanism is also proposed and it indicates the role of electrons coming from the bromine ion might act as radical for the degradation of MB. The present approach is simpler, environment friendly, scalable and could be of great consideration for the diverse energy and environment related applications. Graphic
|
|
9. |
- Aftab, Umair, et al.
(författare)
-
Two step synthesis of TiO2–Co3O4 composite for efficient oxygen evolution reaction
- 2021
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 46:13, s. 9110-9122
-
Tidskriftsartikel (refereegranskat)abstract
- For an active hydrogen gas generation through water dissociation, the sluggish oxygen evolution reaction (OER) kinetics due to large overpotential is a main hindrance. Herein, a simple approach is used to produce composite material based on TiO2/Co3O4 for efficient OER and overpotential is linearly reduced with increasing amount of TiO2. The scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) investigations reveal the wire like morphology of composite materials, formed by the self-assembly of nanoparticles. The titania nanoparticles were homogenously distributed on the larger Co3O4 nanoparticles. The powder x-ray diffraction revealed a tetragonal phase of TiO2 and the cubic phase of Co3O4 in the composite materials. Composite samples with increasing TiO2 content were obtained (18%, 33%, 41% and 65% wt.). Among the composites, cobalt oxide-titanium oxide with the highest TiO2 content (CT-20) possesses the lowest overpotential for OER with a Tafel slope of 60 mV dec−1 and an exchange current density of 2.98 × 10−3A/cm2. The CT-20 is highly durable for 45 h at different current densities of 10, 20 and 30 mA/cm2. Electrochemical impedance spectroscopy (EIS) confirmed the fast charge transport for the CT-20 sample, which potentially accelerated the OER kinetics. These results based on a two-step methodology for the synthesis of TiO2/Co3O4 material can be useful and interesting for various energy storage and energy conversion systems.
|
|
10. |
- Bhatti, Adeel Liaquat, et al.
(författare)
-
An Efficient and Functional Fe3O4/Co3O4 Composite for Oxygen Evolution Reaction
- 2021
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2675-2680
-
Tidskriftsartikel (refereegranskat)abstract
- The design of efficient, stable, durable and noble metal free electro catalysts for oxygen evolution reaction (OER) are of immediate need, but very challenging task. In this study, iron induction into cobalt oxide (Co3O4) has resulted composite structure by wet chemical method. The iron impurity has brought an electronic disorder into Fe3O4/cobalt oxide composite thereby efficient oxygen evolution reaction is demonstrated. An addition of iron content into composite resulted the alternation of morphology from Nano rods to clusters of nanoparticles. The successive addition of iron into composite system reduced the onset potential of OER as compared to the pristine cobalt oxide. A Tafel slope of 80 mVdec(-1) indicates the favorable oxygen evolution reaction kinetics on the sample 4. An over-potential of 370 mV is required to reach a 10 mAcm(-2) current density which is acceptable for a nonprecious catalyst. The catalyst is highly durable and stable for 30 hours. Electrochemical impedance spectroscopy further provided a deeper insight on charge transfer resistance and sample 4 has low charge transfer resistance that supported the OER polarization curves. The sample 4 has more electrochemical active surface area of 393.5 cm(2). These obtained results are exciting and highlighting the importance of composite structure and leave a huge space for the future investigations on composite materials for energy related applications.
|
|
11. |
- Bhatti, Adeel Liaquat, et al.
(författare)
-
Nanostructured Co3O4 electrocatalyst for OER : The role of organic polyelectrolytes as soft templates
- 2021
-
Ingår i: Electrochimica Acta. - : Elsevier. - 0013-4686 .- 1873-3859. ; 398
-
Tidskriftsartikel (refereegranskat)abstract
- Designing an efficient electrocatalyst for the oxygen evolution reaction (OER) in alkaline media is highly needed but very challenging task. Herein, we used organic polyelectrolytes such as (carboxymethyl cellulose) CMC and polyacrylamide polymers for the growth of Co3O4 nanostructures by aqueous chemical growth method. The morphology and composition studies were performed on scanning electron microscopy (SEM), energy dispersive X-ray (EDX), powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM) techniques. The structural properties and the surface chemistry of the Co3O4 electrocatalysts were correlated to the OER performance, and the enhancement mechanism with respect to pristine Co3O4 was observed to be specifically related to the polyelectrolyte templating role.Co3O4@CMC composites displayed reduced crystallite size, producing OER overpotential as low as 290 mV at 10 mAcm−2 in 1.0 KOH and Tafel slope of 71 mVdec−1, suggesting fast transfer of intermediates and electrons during water electrolysis. On the other hand, the use of polyacrylamide and its different templating mechanism resulted in similar crystallite size, but preferential exposed faces and larger surface vacancies content, as demonstrated by HR-TEM and XPS, respectively. Consistently, this material displays cutting-edge OER performance, such as overpotential of 260 mV at 10 mAcm−2 and a low Tafel slope of 63 mVdec−1. The proposed strategy for the preparation of Co3O4 nanostructures in the presence of CMC and polyacrylamide is facile, mass production, thus it could equally contributed towards the realization of hydrogen energy. Therefore, these nanostructures of Co3O4 can be regarded as an alternative and promising materials for the different electrochemical applications including fuel cells, metal air batteries, overall water electrolysis and other energy storage devices.
|
|
12. |
- Khokhar, Shams Parveen, et al.
(författare)
-
An Efficient Nickel Sulfide@NiO Nanocomposite Catalyst with High Density of Active Sites for the Hydrogen Evolution Reaction in Alkaline Media
- 2021
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2520-2528
-
Tidskriftsartikel (refereegranskat)abstract
- Efficient hydrogen evolution reaction (HER) catalysts based on the earth-abundant materials are highly vital to design practical and environmentally friendly water splitting devices. In this study, we present an optimized strategy for the development of active catalysts for hydrogen evolution reaction HER. The composite catalysts are prepared with the nanosurface of NiO for the deposition of NiS by hydrothermal method. In alkaline electrolyte, the NIS/NiO nanocomposite has shown excellent catalytic HER properties at the low onset potential and small Tafel slope of 72 mV dec(-1). A current density of 10 mA/cm(2) is achieved by the nanocomposite obtained with 0.4 gram of NiO as nanosurface for the deposition of NiS (sample 4) at the cost of 429 mV versus RHE. The sample 4 carries more active sites that allow it to act as excellent HER catalyst. Based on this study, we conclude that increasing the nickel oxide content into composite sample facilitates the HER process. Additionally, a long term HER stability for 10 hours and good durability is also demonstrated by the sample 4. Our findings reveal that the optimization of nickel oxide content in the preparation of catalyst leads to the excellent HER activity for the design of practical water splitting devices and other related applications.
|
|
13. |
|
|
14. |
- Mugheri, Abdul Qayoom, et al.
(författare)
-
A Low Charge Transfer Resistance CuO Composite for Efficient Oxygen Evolution Reaction in Alkaline Media
- 2021
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2613-2620
-
Tidskriftsartikel (refereegranskat)abstract
- An efficient, simple, environment-friendly and inexpensive cupric oxide (CuO) electrocatalyst for oxygen evolution reaction (OER) is demonstrated. CuO is chemically deposited on the porous carbon material obtained from the dehydration of common sugar. The morphology of CuO on the porous carbon material is plate-like and monoclinic crystalline phase is confirmed by powder X-ray diffraction. The OER activity of CuO nanostructures is investigated in 1 M KOH aqueous solution. To date, the proposed electrocatalyst has the lowest possible potential of 1.49 V versus RHE (reversible hydrogen electrode) to achieve a current density of 20 mA/cm(2) among the. CuO based electrocatalysts and has Tafel slope of 115 mV dec(-1). The electrocatalyst exhibits an excellent long-term stability for 6 hours along with significant durability. The enhanced catalytic active centers of CuO on the carbon material are due to the porous structure of carbon as well as strong coupling between CuO-C. The functionalization of metal oxides or other related nanostructured materials on porous carbon obtained from common sugar provides an opportunity for the development of efficient energy conversion and energy storage systems.
|
|
15. |
- Mugheri, Abdul Qayoom, et al.
(författare)
-
Efficient tri-metallic oxides NiCo2O4/CuO for the oxygen evolution reaction
- 2019
-
Ingår i: RSC ADVANCES. - : ROYAL SOC CHEMISTRY. - 2046-2069. ; 9:72, s. 42387-42394
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, a simple approach was used to produce nonprecious, earth abundant, stable and environmentally friendly NiCo2O4/CuO composites for the oxygen evolution reaction (OER) in alkaline media. The nanocomposites were prepared by a low temperature aqueous chemical growth method. The morphology of the nanostructures was changed from nanowires to porous structures with the addition of CuO. The NiCo2O4/CuO composite was loaded onto a glassy carbon electrode by the drop casting method. The addition of CuO into NiCo2O4 led to reduction in the onset potential of the OER. Among the composites, 0.5 grams of CuO anchored with NiCo2O4 (sample 2) demonstrated a low onset potential of 1.46 V vs. a reversible hydrogen electrode (RHE). A current density of 10 mA cm(-2) was achieved at an over-potential of 230 mV and sample 2 was found to be durable for 35 hours in alkaline media. Electrochemical impedance spectroscopy (EIS) indicated a small charge transfer resistance of 77.46 ohms for sample 2, which further strengthened the OER polarization curves and indicates the favorable OER kinetics. All of the obtained results could encourage the application of sample 2 in water splitting batteries and other energy related applications.
|
|