| 1. |
- Murari, A., et al.
(författare)
-
A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors
- 2024
-
Ingår i: Nature Communications. - 2041-1723 .- 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.
|
|
| 2. |
|
|
| 3. |
- Joffrin, E., et al.
(författare)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
| 4. |
- Krasilnikov, A., et al.
(författare)
-
Evidence of 9 Be + p nuclear reactions during 2ω CH and hydrogen minority ICRH in JET-ILW hydrogen and deuterium plasmas
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:2
-
Tidskriftsartikel (refereegranskat)abstract
- The intensity of 9Be + p nuclear fusion reactions was experimentally studied during second harmonic (2ω CH) ion-cyclotron resonance heating (ICRH) and further analyzed during fundamental hydrogen minority ICRH of JET-ILW hydrogen and deuterium plasmas. In relatively low-density plasmas with a high ICRH power, a population of fast H+ ions was created and measured by neutral particle analyzers. Primary and secondary nuclear reaction products, due to 9Be + p interaction, were observed with fast ion loss detectors, γ-ray spectrometers and neutron flux monitors and spectrometers. The possibility of using 9Be(p, d)2α and 9Be(p, α)6Li nuclear reactions to create a population of fast alpha particles and study their behaviour in non-active stage of ITER operation is discussed in the paper.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
|
|
| 19. |
|
|
| 20. |
|
|
| 21. |
|
|
| 22. |
|
|
| 23. |
|
|
| 24. |
|
|
| 25. |
|
|
| 26. |
|
|
| 27. |
- Bombarda, F., et al.
(författare)
-
Runaway electron beam control
- 2019
-
Ingår i: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 61:1
-
Tidskriftsartikel (refereegranskat)
|
|
| 28. |
|
|
| 29. |
-
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:9
-
Tidskriftsartikel (refereegranskat)
|
|
| 30. |
-
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:1
-
Forskningsöversikt (refereegranskat)
|
|
| 31. |
- Airila, M. I., et al.
(författare)
-
ERO modelling of local deposition of injected C-13 tracer at the outer divertor of JET
- 2009
-
Ingår i: Physica Scripta. - 0031-8949 .- 1402-4896. ; T138, s. 014021-
-
Tidskriftsartikel (refereegranskat)abstract
- The 2004 tracer experiment of JET with the injection of (CH4)-C-13 into H-mode plasma at the outer divertor has been modelled with the Monte Carlo impurity transport code ERO. EDGE2D solutions for inter-ELM and ELM-peak phases were used as plasma backgrounds. Local two-dimensional (2D) deposition patterns at the vertical outer divertor target plate were obtained for comparison with post-mortem surface analyses. ERO also provides emission profiles for comparison with radially resolved spectroscopic measurements. Modelling indicates that enhanced re-erosion of deposited carbon layers is essential in explaining the amount of local deposition. Assuming negligible effective sticking of hydrocarbons, the measured local deposition of 20-34% is reproduced if re-erosion of deposits is enhanced by a factor of 2.5-7 compared to graphite erosion. If deposits are treated like the substrate, the modelled deposition is 55%. Deposition measurements at the shadowed area around injectors can be well explained by assuming negligible re-erosion but similar sticking behaviour there as on plasma-wetted surfaces.
|
|
| 32. |
- Airila, M. I., et al.
(författare)
-
Preliminary Monte Carlo simulation of beryllium migration during JET ITER-like wall divertor operation
- 2015
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 463, s. 800-804
-
Tidskriftsartikel (refereegranskat)abstract
- Migration of beryllium into the divertor and deposition on tungsten in the final phase of the first ITER-like-wall campaign of JET are modelled with the 3D Monte Carlo impurity transport code ERO. The simulation covers the inner wall and the inner divertor. To generate the plasma background for Monte Carlo tracing of impurity particles, we use the EDGE2D/EIRENE code set. At the relevant regions of the wall, the estimated plasma conditions vary around T-e approximate to 5eV and n(e) 2 x 10(17) m(-3) (far-scrape-off layer; more than 10 cm away from the LCFS). We calculate impurity distributions in the plasma using the main chamber source as a free parameter in modelling and attempt to reproduce inter-ELM spectroscopic BeII line (527 nm) profiles at the divertor. The present model reproduces the level of emission close to the inner wall, but further work is needed to match also the measured emission peak values and ultimately link the modelled poloidal net deposition profiles of beryllium to post mortem data.
|
|
| 33. |
|
|
| 34. |
- Andrew, P, et al.
(författare)
-
Outer divertor target deposited layers during reversed magnetic field operation in JET
- 2005
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 337:1-3, s. 99-103
-
Tidskriftsartikel (refereegranskat)abstract
- Divertor surface temperatures are significantly affected by the presence of deposited surface layers. This phenomenon can be used to monitor deposited layer evolution on a shot-by-shot basis. It was found that during an experimental campaign where the B x del B direction was reversed that the outer target, normally an erosion zone, became a deposition zone.
|
|
| 35. |
- Baron-Wiechec, A., et al.
(författare)
-
First dust study in JET with the ITER-like wall : sampling, analysis and classification
- 2015
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 55:11
-
Tidskriftsartikel (refereegranskat)abstract
- Results of the first dust survey in JET with the ITER-Like Wall (JET-ILW) are presented. The sampling was performed using adhesive stickers from the divertor tiles where the greatest material deposition was detected after the first JET-ILW campaign in 2011-2012. The emphasis was especially on sampling and analysis of metal particles (Be and W) with the aim to determine the composition, size, surface topography and internal dust structure using a large set of methods: high-resolution scanning and transmission electron microscopy, focused ion beam, electron diffraction and also wavelength and energy dispersive x-ray spectroscopy. The most important was the identification of beryllium dust both in the form of flakes and droplets with dimensions in the micrometer range. Tungsten, molybdenum, inconel constituents were identified along with many impurity species. The particles are categorised and the origin of the various constituents discussed.
|
|
| 36. |
- Baron-Wiechec, A., et al.
(författare)
-
Global erosion and deposition patterns in JET with the ITER-like wall
- 2015
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 463, s. 157-161
-
Tidskriftsartikel (refereegranskat)abstract
- A set of Be and W tiles removed after the first ITER-like wall campaigns (JET-ILW) from 2011 to 2012 has been analysed. The results indicate that the primary erosion site is in the main chamber (Be) as in previous carbon campaigns (JET-C). In particular the limiters tiles near the mid-plane are eroded probably during the limiter phases of discharges. W is found at low concentrations on all plasma-facing surfaces of the vessel indicating deposition via plasma transport initially from the W divertor and from main chamber W-coated tiles; there are also traces of Mo (used as an interlayer for these coatings). Deposited films in the inner divertor have a layered structure, and every layer is dominated by Be with some W and O content.
|
|
| 37. |
- Bergsåker, Henric, et al.
(författare)
-
First results from the Be-10 marker experiment in JET with ITER-like wall
- 2014
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 54:8, s. 082004-
-
Tidskriftsartikel (refereegranskat)abstract
- When the ITER-like wall was installed in JET, one of the 218 Be inner wall guard limiter tiles had been enriched with Be-10 as a bulk isotopic marker. During the shutdown in 2012-2013, a set of tiles were sampled nondestructively to collect material for accelerator mass spectroscopy measurements of Be-10 concentration. The letter shows how the marker experiment was set up, presents first results and compares them to preliminary predictions of marker redistribution, made with the ASCOT numerical code. Finally an outline is shown of what experimental data are likely to become available later and the possibilities for comparison with modelling using the WallDYN, ERO and ASCOT codes are discussed.
|
|
| 38. |
- Bergsåker, Henric, et al.
(författare)
-
Microanalysis of deposited layers in the divertor of JET following operations with carbon wall
- 2013
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 438:Suppl., s. S668-S672
-
Tidskriftsartikel (refereegranskat)abstract
- Elemental mapping of cross sections of deposited layers on inboard tiles in the JET divertor after exposure to plasma operations with carbon wall are presented. The study was made using microbeam ion beam analysis methods in combination with optical microscopy and SEM. The surfaces had been exposed to plasma through different periods of operation (1998-2007, 2007-2009 and 1998-2009). The texture and composition of the layers are non-uniform. The physical structures include columnar, lamellar and disordered globular appearances. The distribution of trapped deuterium was frequently found to be lamellar, with well-defined sub layers with higher deuterium concentration. However, 3D regions with dimensions of about 100 μm with enhanced deuterium content were also found, both at the layer surfaces and in the layer cross sections. The distributions of beryllium and Inconel components were lamellar but did not otherwise show large non-uniformity on the same scale length as the deuterium.
|
|
| 39. |
- Bergsåker, Henrik, et al.
(författare)
-
Microscopically nonuniform deposition and deuterium retention in the divertor in JET with ITER-like wall
- 2015
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 463, s. 956-960
-
Tidskriftsartikel (refereegranskat)abstract
- The divertor surfaces in JET with ITER-like wall (ILW) have been studied using micro ion beam analysis (mu-IBA) methods and scanning electron microscopy (SEM). Deposited layers with beryllium as main constituent had been formed during plasma operations through 2011-2012. The deuterium trapping and impurity deposition were non-uniform, frequently enhanced within pits, cracks and valleys, regions reaching in size from 10 mu m to 200 mu m. The impurity deposition and fuel retention were correlated with the surface slope with respect to the direction of ion incidence. Typically more than 70% of the total measured areal density of trapped D was found in less than 30% of the surface area. This is of consequence for the interpretation of other surface analyses and in extrapolation from fuel retention in JET with ITER-like wall and rough divertor surfaces to ITER with smoother surfaces.
|
|
| 40. |
- Bergsåker, Henric, et al.
(författare)
-
Microstructure and inhomogeneous fuel trapping at divertor surfaces in the JET tokamak
- 2014
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section B. - : Elsevier BV. - 0168-583X .- 1872-9584. ; 332, s. 266-270
-
Tidskriftsartikel (refereegranskat)abstract
- The plasma deposited layers at divertor surfaces in the JET tokamak with carbon wall have been studied post mortem, using micro ion beam analysis (mu-IBA) methods, optical microscopy and scanning electron microscopy (SEM). The layers were formed during plasma operations over different periods through 1998-2009. They frequently have a columnar structure. For mu-IBA a 3 MeV He-3 beam was used, focused to about 5-15 mu m size. Nuclear reaction analysis was used to measure D, Be and C. Elemental mapping was carried out both at the original surface and on polished layer cross sections. Trapped deuterium is predominantly found in remote areas on the horizontal bottom divertor tiles and in regions with locally enhanced deuterium concentration on the vertical tiles. Pockets with enhanced deuterium concentration are found in the carbon fibre composite (CFC) substrate. Areas with dimensions of about 100 mu m with enhanced deuterium concentration are also found inside the deposited layers. The inhomogeneous fuel trapping is tentatively explained with co-deposition in partly protected pits in the substrate and by incorporation of dust particles in the growing layers.
|
|
| 41. |
- Bergsåker, Henric, et al.
(författare)
-
Nuclear reaction analysis with ion microbeam of cross sections of surface layers deposited in tokamak divertor
- 2007
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 362:2-3, s. 215-221
-
Tidskriftsartikel (refereegranskat)abstract
- Ion micro beam analysis has been applied to the investigation of plasma deposited layers covering the divertor tiles in the JET tokamak. Since the layers are about 100 μm thick they are too thick to be completely investigated by ordinary ion beam analysis. Cross sections of the layers were prepared by cutting and polishing. Elemental depth profiles were determined from the two dimensional images that could be derived by nuclear reaction analysis and resonant backscattering spectrometry, using ion beams focused to a few μm spot size. A combination of analysis methods are shown, which allow measurements of the concentration profiles of carbon, beryllium, deuterium, oxygen and stainless steel components at levels of a few percent, with an accuracy better than 10%.
|
|
| 42. |
- Brezinsek, S., et al.
(författare)
-
Beryllium migration in JET ITER-like wall plasmas
- 2015
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 55:6
-
Tidskriftsartikel (refereegranskat)abstract
- JET is used as a test bed for ITER, to investigate beryllium migration which connects the lifetime of first-wall components under erosion with tokamak safety, in relation to long-term fuel retention. The (i) limiter and the (ii) divertor configurations have been studied in JET-ILW (JET with a Be first wall and W divertor), and compared with those for the former JET-C (JET with carbon-based plasma-facing components (PFCs)). (i) For the limiter configuration, the Be gross erosion at the contact point was determined in situ by spectroscopy as between 4% (E-in = 35 eV) and more than 100%, caused by Be self-sputtering (E-in = 200 eV). Chemically assisted physical sputtering via BeD release has been identified to contribute to the effective Be sputtering yield, i.e. at E-in = 75 eV, erosion was enhanced by about 1/3 with respect to the bare physical sputtering case. An effective gross yield of 10% is on average representative for limiter plasma conditions, whereas a factor of 2 difference between the gross erosion and net erosion, determined by post-mortem analysis, was found. The primary impurity source in the limiter configuration in JET-ILW is only 25% higher (in weight) than that for the JET-C case. The main fraction of eroded Be stays within the main chamber. (ii) For the divertor configuration, neutral Be and BeD from physically and chemically assisted physical sputtering by charge exchange neutrals and residual ion flux at the recessed wall enter the plasma, ionize and are transported by scrape-off layer flows towards the inner divertor where significant net deposition takes place. The amount of Be eroded at the first wall (21 g) and the Be amount deposited in the inner divertor (28 g) are in fair agreement, though the balancing is as yet incomplete due to the limited analysis of PFCs. The primary impurity source in the JET-ILW is a factor of 5.3 less in comparison with that for JET-C, resulting in lower divertor material deposition, by more than one order of magnitude. Within the divertor, Be performs far fewer re-erosion and transport steps than C due to an energetic threshold for Be sputtering, and inhibits as a result of this the transport to the divertor floor and the pump duct entrance. The target plates in the JET-ILW inner divertor represent at the strike line a permanent net erosion zone, in contrast to the net deposition zone in JET-C with thick carbon deposits on the CFC (carbon-fibre composite) plates. The Be migration identified is consistent with the observed low long-term fuel retention and dust production with the JET-ILW.
|
|
| 43. |
- Brezinsek, S., et al.
(författare)
-
Overview of experimental preparation for the ITER-Like Wall at JET
- 2011
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 415:1, s. S936-S942
-
Tidskriftsartikel (refereegranskat)abstract
- Experiments in JET with carbon-based plasma-facing components have been carried out in preparation of the ITER-Like Wall with beryllium main chamber and full tungsten divertor. The preparatory work was twofold: (i) development of techniques, which ensure safe operation with the new wall and (ii) provision of reference plasmas, which allow a comparison of operation with carbon and metallic wall. (i) Compatibility with the W divertor with respect to energy loads could be achieved in N-2 seeded plasmas at high densities and low temperatures, finally approaching partial detachment, with only moderate confinement reduction of 10%. Strike-point sweeping increases the operational space further by re-distributing the load over several components. (ii) Be and C migration to the divertor has been documented with spectroscopy and QMBs under different plasma conditions providing a database which will allow a comparison of the material transport to remote areas with metallic walls. Fuel retention rates of 1.0-2.0 x 10(21) D s(-1) were obtained as references in accompanied gas balance studies.
|
|
| 44. |
- Catarino, N., et al.
(författare)
-
Assessment of erosion, deposition and fuel retention in the JET-ILW divertor from ion beam analysis data
- 2017
-
Ingår i: Nuclear Materials and Energy. - : ELSEVIER. - 2352-1791. ; 12, s. 559-563
-
Tidskriftsartikel (refereegranskat)abstract
- Post-mortem analyses of individual components provide relevant information on plasma-surface interactions like tungsten erosion, beryllium deposition and plasma fuel retention with divertor tiles via implantation or co-deposition. Ion Beam techniques are ideal tools for such purposes and have been extensively used for post-mortem analyses of selected tiles from JET following each campaign. In this contribution results from tiles removed from the JET ITER-Like Wall (JET-ILW) divertor following the 2013-2014 campaign are presented. The results summarize erosion, deposition and fuel retention along the poloidal cross section of the divertor surface and provide data for comparison with the first JET-ILW campaign, showing a similar pattern of material migration with the exception of Tile 6 where the strike point time on the tile was similar to 4 times longer in 2013-2014 than in 2011-2012, which is likely to account for more material migration to this region. The W deposition on top of the Mo marker coating of Tile 4 shows that the enrichment takes place at the strike point location. (C) 2016 The Authors. Published by Elsevier Ltd.
|
|
| 45. |
- Catarino, N., et al.
(författare)
-
Deposition in the tungsten divertor during the 2011-2016 campaigns in JET with ITER-like wall
- 2020
-
Ingår i: Physica Scripta. - : IOP PUBLISHING LTD. - 0031-8949 .- 1402-4896. ; T171:1
-
Tidskriftsartikel (refereegranskat)abstract
- A build-up of co-deposits in remote areas of the divertor can contribute significantly to the overall fuel retention. The control of plasma-material interactions via the study and understanding of erosion-deposition of PFCs provides vital information for the efficient future operation of ITER. The major aim of this work is to reveal details of beryllium deposition and fuel (deuterium) retention on divertor plasma-facing components removed from the JET ITER-Like Wall divertor after cumulative exposure during the first two (ILW-1+2) and all three (ILW-1+2+3) campaigns. Ion beam analysis techniques such as Rutherford backscattering spectrometry, nuclear reaction analysis and proton induced x-ray emission have been extensively used for post-mortem analyses of selected tiles from JET following each campaign and can provide relevant information on plasma-surface interactions like tungsten erosion, beryllium deposition and plasma fuel retention with divertor tiles via implantation or co-deposition. The studied divertor tiles represent a unique set of samples, which have been exposed to plasmas since the beginning of the JET-ILW operation for three successive plasma campaigns. This is a comprehensive comparison of divertor components after these operation periods. The results presented summarise deposition and fuel retention on Tiles 4 (inner base) and 6 (outer base). Although the deposition pattern is similar to that determined after individual campaigns, D retention is not a cumulative process and is determined mainly by the last campaign, and the total Be deposit after the 3 campaigns (i.e. data 1+2+3=tile exposed 2011-2016) is less than the sum of the deposits after each individual campaign (sum 1+2+3) for Tile 4 but greater for Tile 6.
|
|
| 46. |
- Catarino, N., et al.
(författare)
-
Time-resolved deposition in the remote region of the JET-ILW divertor : measurements and modelling
- 2017
-
Ingår i: Physica Scripta. - : IOP PUBLISHING LTD. - 0031-8949 .- 1402-4896. ; T170
-
Tidskriftsartikel (refereegranskat)abstract
- One crucial requirement for the development of fusion power is to know where, and how much, impurities collect in the machine, and how much of the fuelling isotope tritium will be trapped therein. The most relevant information on this issue comes from the operation of the Joint European Tokamak (JET), which is the world's largest operating tokamak and has the same interior plasma-facing materials as the next step machine, ITER. Much of the information gained so far has been from post-mortem analysis of samples collected after whole campaigns involving varied types of operation. This paper describes time-resolved measurements of the deposition rate using rotating collectors (RC) placed in remote areas of the JET divertor during the 2013-2014 campaign with the ITER-like Wall (ILW). These techniques allow the effects of different types of operation to be distinguished. Rotating collectors made of silicon discs housed behind an aperture are exposed to the plasma. Each time the magnetic field coils are ramped up for a discharge the disc rotates, providing a linear relationship between the exposed region and the discharge number. Post-mortem ion beam analyses provide information on the deposit composition as a function of the discharge number. The results show that the Be deposition average for the RC in the corners of the inner and outer divertor are 4.9 x 10(16) cm(-2) and 1.8 x 10(17) cm(-2), respectively, accumulated over an average of similar to 25 pulses. Data from the rotating collector below Tile 5 in the central region of divertor indicate a Be deposition rate of 9.3 x 10(15) cm(-2), per similar to 25 pulses.
|
|
| 47. |
- Coad, J. P., et al.
(författare)
-
Deposition results from rotating collector diagnostics in JET
- 2009
-
Ingår i: Physica scripta. T. - : Institute of Physics Publishing (IOPP). - 0281-1847. ; T138, s. 014023-
-
Tidskriftsartikel (refereegranskat)abstract
- Rotating collectors (RC) were installed in JET during the period 2005-2007, each providing a time-resolved deposition pattern on the surface of a rotating silicon disc, which could be analysed once retrieved from the vessel. This paper reports results from the silicon disc removed from the RC located under the load-bearing septum replacement plate in JET in 2007. Nuclear reaction analysis results of the deposits on the disc have been correlated directly with the pattern of erosion and deposition observed by the quartz microbalance (QMB) located in an equivalent position. The thickest film in the time-resolved region (i.e. deposited in similar to 60 pulses) was similar to 250 nm, and the Be/C ratio was generally found to be 0.1 or lower, with two regions where the ratio rose to 0.2. The deposition observed with the QMB appears to be about a factor of four less.
|
|
| 48. |
- Coad, J. P., et al.
(författare)
-
Diagnostics for studying deposition and erosion processes in JET
- 2005
-
Ingår i: Fusion engineering and design. - : Elsevier. - 0920-3796 .- 1873-7196. ; 74:1-4, s. 745-749
-
Tidskriftsartikel (refereegranskat)abstract
- Estimates of erosion, deposition and H-isotope retention in JET from previous divertor campaigns have relied on analysis of in-vessel components removed at shutdowns. The components analysed have also provided an incomplete coverage of the vessel. In 2004, new diagnostics are being installed to give a more complete picture (such as smart tiles) and to provide some time resolution. The latter includes further quartz microbalances (QMB), following the successful operation of a prototype in 2002-2004 [H.-G. Esser, G. Neill, P. Coad, G.F. Matthews, D. Jolovic, D. Wilson, M. Freisinger, V. Philipps, Quartz microbalance: a time-resolved diagnostic to measure material deposition in JET, Fusion Eng. Des. 66-68 (2003) 855-860; H.-G. Esser, V. Philipps, M. Freisinger, G.F. Matthews, J.P. Coad, G.F. Neill, JET EFDA Contributors, Effect of plasma configuration on carbon migration measured in the inner divertor of JET using quartz microbalance, J. Nucl. Mater. 337-339 (2005) 84-87], which will also have temperature control. Other diagnostics include rotating collectors and deposition monitors [M. Mayer, V. Rohde, P. Coad, P. Wienhold, ASDEX Upgrade Team, JET EFDA Contributors, Carbon erosion and migration in fusion devices, Phys. Scr. T111 (2004) 55-59]. Units are also being installed to provide information on mirrors for ITER.
|
|
| 49. |
- Coad, J. P., et al.
(författare)
-
Distribution of hydrogen isotopes, carbon and beryllium on in-vessel surfaces in the various jet divertors
- 2005
-
Ingår i: Fusion science and technology. - 1536-1055 .- 1943-7641. ; 48:1, s. 551-556
-
Tidskriftsartikel (refereegranskat)abstract
- JET has operated with divertors of differing geometries since 1994. Impurities accumulated in the inner leg of all the divertors, and operation of the first (Mk I) divertor with beryllium tiles demonstrated that most are eroded from the main chamber walls and swept along the scrape-off layer to the inner divertor. Carbon deposited at the inner divertor is then locally transported to shadowed regions such as the inner louvres, where, for example, most of the tritium was trapped during the deuterium-tritium experiment (DTE1). Factors affecting these transport processes (e.g. temperature) are important for ITER, but are not well understood.
|
|
| 50. |
- Coad, J. P., et al.
(författare)
-
Erosion and deposition in the JET MkII-SRP divertor
- 2007
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 363, s. 287-293
-
Tidskriftsartikel (refereegranskat)abstract
- Carbon-13 labelled methane was injected into the outer divertor during a series of H-mode discharges on the last day of operations with the JET MkII-SRP divertor. Tiles from around the vessel were removed during the subsequent shutdown and surface deposits were analysed by IBA techniques and SIMS. First attempts to model the pattern of 13 C deposition using EDGE2D are reported. Erosion of W markers at the outer divertor was observed, with implications for the ITER-like wall experiment planned for JET, whilst thin film growth in the same region has been followed by the effect on infrared measurements. The composition of thick films deposited at the inner divertor during the MkII-SRP campaign, and the migration to the inner corner of the divertor observed by a quartz micro-balance, provide further information on divertor transport. Crown
|
|
