| 1. |
- Kovtun, Alessandro, et al.
(author)
-
Core-shell graphene oxide-polymer hollow fibers as water filters with enhanced performance and selectivity
- 2021
-
In: Faraday Discussions. - : Royal Society of Chemistry (RSC). - 1359-6640 .- 1364-5498. ; 227, s. 274-290
-
Journal article (peer-reviewed)abstract
- Commercial hollow fiber filters for micro- and ultrafiltration are based on size exclusion and do not allow the removal of small molecules such as antibiotics. Here, we demonstrate that a graphene oxide (GO) layer can be firmly immobilized either inside or outside polyethersulfone-polyvinylpyrrolidone hollow fiber (Versatile PES (R), hereafter PES) modules and that the resulting core-shell fibers inherits the microfiltration ability of the pristine PES fibers and the adsorption selectivity of GO. GO nanosheets were deposited on the fiber surface by filtration of a GO suspension through a PES cartridge (cut-off 0.1-0.2 mu m), then fixed by thermal annealing at 80 degrees C, rendering the GO coating stably fixed and unsoluble. The filtration cut-off, retention selectivity and efficiency of the resulting inner and outer modified hollow fibers (HF-GO) were tested by performing filtration on water and bovine plasma spiked with bovine serum albumin (BSA, 66 kDa, approximate to 15 nm size), monodisperse polystyrene nanoparticles (52 nm and 303 nm sizes), with two quinolonic antibiotics (ciprofloxacin and ofloxacin) and rhodamine B (RhB). These tests showed that the microfiltration capability of PES was retained by HF-GO, and in addition the GO coating can capture the molecular contaminants while letting through BSA and smaller polystyrene nanoparticles. Combined XRD, molecular modelling and adsorption experiments show that the separation mechanism does not rely only on physical size exclusion, but involves intercalation of solute molecules between the GO layers.
|
|
| 2. |
- Kovtun, Alessandro, et al.
(author)
-
Graphene oxide–polysulfone filters for tap water purification, obtained by fast microwave oven treatment
- 2019
-
In: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3372 .- 2040-3364. ; 11:11, s. 22780-22787
-
Journal article (peer-reviewed)abstract
- The availability of clean, pure water is a major challenge for the future of our society. 2-Dimensional nanosheets of GO seem promising as nanoporous adsorbent or filters for water purification; however, their processing in macroscopic filters is challenging, and their cost vs. standard polymer filters is too high. Here, we describe a novel approach to combine graphene oxide (GO) sheets with commercial polysulfone (PSU) membranes for improved removal of organic contaminants from water. The adsorption physics of contaminants on the PSU-GO composite follows Langmuir and Brunauer–Emmett–Teller (BET) models, with partial swelling and intercalation of molecules in between the GO layers. Such a mechanism, well-known in layered clays, has not been reported previously for graphene or GO. Our approach requires minimal amounts of GO, deposited directly on the surface of the polymer, followed by stabilization using microwaves or heat. The purification efficiency of the PSU-GO composites is significantly improved vs. benchmark commercial PSU, as demonstrated by the removal of two model contaminants, rhodamine B and ofloxacin. The excellent stability of the composite is confirmed by extensive (100 hours) filtration tests in commercial water cartridges.
|
|
| 3. |
- Poletti, Fabrizio, et al.
(author)
-
Electrochemical sensing of glucose by chitosan modified graphene oxide
- 2020
-
In: JPhys Materials. - : IOP Publishing. - 2515-7639. ; 3:1
-
Journal article (peer-reviewed)abstract
- Graphene oxide (GO) coated electrodes provide an excellent platform for enzymatic glucose sensing, induced by the presence of glucose oxidase and an electrochemical transduction. Here, we show that the sensitivity of GO layers for glucose detection redoubles upon blending GO with chitosan (GO+Ch) and increases up to eight times if covalent binding of chitosan to GO (GO-Ch) is exploited. In addition, the conductivity of the composite material GO-Ch is suitable for electrochemical applications without the need of GO reduction, which is generally required for GO based coatings. Covalent modification of GO is achieved by a standard carboxylic activation/amidation approach by exploiting the abundant amino pendants of chitosan. Successful functionalization is proved by comparison with an ad-hoc synthesized control sample realized by using non-activated GO as precursor. The composite GO-Ch was deposited on standard screen-printed electrodes by a drop-casting approach. Comparison with a chitosan-GO blend and with pristine GO demonstrated the superior reliability and efficiency of the electrochemical response for glucose as a consequence of the high number of enzyme binding sites and of the partial reduction of GO during the carboxylic activation synthetic step.
|
|
| 4. |
- Posati, Tamara, et al.
(author)
-
Polydopamine Nanoparticle-Coated Polysulfone Porous Granules as Adsorbents for Water Remediation
- 2019
-
In: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 4:3, s. 4839-4847
-
Journal article (peer-reviewed)abstract
- Water purification technologies possibly based on eco-sustainable, low cost, and multifunctional materials are being intensively pursued to resolve the current water scarcity and pollution. In this scenario, polysulfone hollow porous granules (PS-HPGs) prepared from scraps of the industrial production of polysulfone hollow fiber membranes were recently introduced as adsorbents and filtration materials for water and air treatment. Here, we report the functionalization of PS-HPGs with polydopamine (PD) nanoparticles for the preparation of a new versatile and efficient adsorbent material, namely, PSPD-HPGs. The in situ growth of PD under mild alkaline oxidative polymerization allowed us to stably graft PD on polysulfone granules. Enhanced removal efficiency of ofloxacin, an antibiotic drug, with an improvement up to 70% with respect to the pristine PS-HPGs, and removal of Zn(II) and Ni(II) were also observed after PD modification. Remarkably, removal of Cu(II) ions with an efficiency up to 80% was observed for PSPD-HPGs, whereas no adsorption was found for the PD-free precursor. Collectively, these data show that modification with a biocompatible polymer such as PD provides a simple and valuable tool to enlarge the field of application of polysulfone hollow granules for water remediation from both organic and metal cation contaminants.
|
|
