| 1. |
- Guo, Renjun, et al.
(författare)
-
Degradation mechanisms of perovskite solar cells under vacuum and one atmosphere of nitrogen
- 2021
-
Ingår i: Nature Energy. - : Springer Nature. - 2058-7546. ; 6:10, s. 977-
-
Tidskriftsartikel (refereegranskat)abstract
- Extensive studies have focused on improving the operational stability of perovskite solar cells, but few have surveyed the fundamental degradation mechanisms. One aspect overlooked in earlier works is the effect of the atmosphere on device performance during operation. Here we investigate the degradation mechanisms of perovskite solar cells operated under vacuum and under a nitrogen atmosphere using synchrotron radiation-based operando grazing-incidence X-ray scattering methods. Unlike the observations described in previous reports, we find that light-induced phase segregation, lattice shrinkage and morphology deformation occur under vacuum. Under nitrogen, only lattice shrinkage appears during the operation of solar cells, resulting in better device stability. The different behaviour under nitrogen is attributed to a larger energy barrier for lattice distortion and phase segregation. Finally, we find that the migration of excessive PbI2 to the interface between the perovskite and the hole transport layer degrades the performance of devices under vacuum or under nitrogen. Understanding degradation mechanisms in perovskite solar cells is key to their development. Now, Guo et al. show a greater degradation of the perovskite structure and morphology for devices operated under vacuum than under nitrogen.
|
|
| 2. |
- Pan, Linfeng, et al.
(författare)
-
High carrier mobility along the [111] orientation in Cu2O photoelectrodes
- 2024
-
Ingår i: Nature. - : Springer Nature. - 0028-0836 .- 1476-4687. ; 628:8009, s. 765-770
-
Tidskriftsartikel (refereegranskat)abstract
- Solar fuels offer a promising approach to provide sustainable fuels by harnessing sunlight1,2. Following a decade of advancement, Cu2O photocathodes are capable of delivering a performance comparable to that of photoelectrodes with established photovoltaic materials3,4,5. However, considerable bulk charge carrier recombination that is poorly understood still limits further advances in performance6. Here we demonstrate performance of Cu2O photocathodes beyond the state-of-the-art by exploiting a new conceptual understanding of carrier recombination and transport in single-crystal Cu2O thin films. Using ambient liquid-phase epitaxy, we present a new method to grow single-crystal Cu2O samples with three crystal orientations. Broadband femtosecond transient reflection spectroscopy measurements were used to quantify anisotropic optoelectronic properties, through which the carrier mobility along the [111] direction was found to be an order of magnitude higher than those along other orientations. Driven by these findings, we developed a polycrystalline Cu2O photocathode with an extraordinarily pure (111) orientation and (111) terminating facets using a simple and low-cost method, which delivers 7 mA cm−2 current density (more than 70% improvement compared to that of state-of-the-art electrodeposited devices) at 0.5 V versus a reversible hydrogen electrode under air mass 1.5 G illumination, and stable operation over at least 120 h.
|
|
| 3. |
- Zhao, Baodan, et al.
(författare)
-
High-efficiency perovskite-polymer bulk heterostructure light-emitting diodes
- 2018
-
Ingår i: Nature Photonics. - : NATURE PUBLISHING GROUP. - 1749-4885 .- 1749-4893. ; 12:12, s. 783-
-
Tidskriftsartikel (refereegranskat)abstract
- Perovskite-based optoelectronic devices are gaining much attention owing to their remarkable performance and low processing cost, particularly for solar cells. However, for perovskite light-emitting diodes, non-radiative charge recombination has limited the electroluminescence efficiency. Here we demonstrate perovskite-polymer bulk heterostructure light-emitting diodes exhibiting external quantum efficiencies of up to 20.1% (at current densities of 0.1-1 mA cm(-2)). The light-emitting diode emissive layer comprises quasi-two-dimensional and three-dimensional (2D/3D) perovskites and an insulating polymer. Photogenerated excitations migrate from quasi-2D to lower-energy sites within 1 ps, followed by radiative bimolecular recombination in the 3D regions. From near-unity external photoluminescence quantum efficiencies and transient kinetics of the emissive layer with and without charge-transport contacts, we find non-radiative recombination pathways to be effectively eliminated, consistent with optical models giving near 100% internal quantum efficiencies. Although the device brightness and stability (T-50 = 46 h in air at peak external quantum efficiency) require further improvement, our results indicate the significant potential of perovskite-based photon sources.
|
|
| 4. |
- Zou, Yuqin, et al.
(författare)
-
Ionic liquids tailoring crystal orientation and electronic properties for stable perovskite solar cells
- 2023
-
Ingår i: Nano Energy. - : Elsevier BV. - 2211-2855 .- 2211-3282. ; 112, s. 108449-108449
-
Tidskriftsartikel (refereegranskat)abstract
- The crystallization behavior of perovskite films has a profound influence on the resulting defect densities, charge carrier dynamics and photovoltaic performance. Herein, we introduce ionic liquids into the perovskite component to tailor the crystal growth of perovskite films from a disordered to a preferential corner-up orientation and accordingly increase the charge carrier mobility to accelerate electron transport and extraction. Using time-resolved measurements, we probe the charge carrier generation, transport and recombination behavior in these films and related devices. We find the ionic liquid-containing samples exhibit lower defects, faster charge carrier transport and suppressed non-radiative recombination, contributing to higher efficiency and fill factor. Via operando grazing-incidence small- and wide-angle X-ray scattering measurements, we observe a light-induced lattice compression and grain fragmentation in the control devices, whereas the ionic liquid-containing devices exhibit a slight light-induced crystal reconstitution and stronger tolerance against illumination. Under ambient conditions, the non-encapsulated device with the pyrrolidinium-based ionic compound (Pyr14BF4) maintains 97% of its initial efficiency after 4368 h.
|
|
