| 1. |
- Dervishaj, Arlind, et al.
(författare)
-
New computational methods with Sunlight, Daylight, and Quality Views for Regenerative Design
- 2022
-
Ingår i: 2nd International Nordic Conference on Building Simulation. - Copenhagen, Denmark : EDP Sciences.
-
Konferensbidrag (refereegranskat)abstract
- This paper investigates novel computational methods for Regenerative Design by developing further on the European Daylight Standard EN 17037, to make it useful at both urban and architectural scales. Case studies are evaluated for sunlight, daylight and quality views. A computational method, compliant with EN 17037, is introduced for the evaluation of sunlight. An assessment of daylight metrics, for an office building in Helsinki, with a 300 lux target, demonstrates a 12% difference between spatial Daylight Autonomy (sDA; occupied hours) and Illuminance levels (EN 17037 method 2; daylight hours), 37% between sDA and Daylight Factor (EN 17037 method 1), and 25% between methods 1 and 2. A new computational method for evaluating ‘views’ on the floorplan is proposed that considers ‘view content’ (EN 17037 View Out layers), ‘view access’, the potential viewpoint-based ‘outside distance’, and can be extended to add the ‘quality of environmental information’. Further research directions and use of spatial metrics are discussed for sunlight, daylight, and view quality.
|
|
| 2. |
- Dervishaj, Arlind, et al.
(författare)
-
Sunlight Autonomy (SA) for building facades
- 2023
-
Konferensbidrag (refereegranskat)abstract
- Daylight has been a driver of urban and architectural form across climates. In the past century, metrics were introduced to describe performance such as minimum sunlight hours and the daylight factor. Means of assessment and related requirements were introduced in different contexts for sunlight/daylight. Some methods aimed to bridge the gap between inside-out such as the Vertical Sky Component (VSC) and the recent rethinking based on Aperture-based Daylight Modelling (ABDM). However, each daylighting method goes with its pros and cons. In addition, more advanced or combined simulations from research have overlooked the designer’s perspective. For example, if the method is sufficiently understood by the designer, and/or actionable and therefore informs the design process. This study aims to introduce a new daylight metric for buildings as an early design stage methodology to bridge daylight inside/out – between buildings and urban developments. A traditional method like Sunlight (unit of hours) applies to both buildings and open spaces. Sunlight assessment can be time-consuming and has limitations when carried out on paper. Computation-based approaches and 3D models can support its effective use and reduce the time and errors of the process. Sunlight has also a higher versatility than other methods in terms of scope of the analysis, scale, geometrical complexity, and analysis period, e.g., an hour, a day, season, year or user specified. Results can be presented cumulatively in hours, averaged, or as a percentage. Thus, the assessment can be easily understood by all stakeholders. In addition, sunlight can be used to design for the densification of cities, green spaces, and outdoor comfort provision. Case studies are illustrated by mapping results onto model geometry. Despite the versatility of sunlight, it also goes with uncertainty in interpretation for designers. As an improvement, simulations can be customized to a standard (e.g., EN 17037 Daylight in Buildings) with existing visual scripting tools such as Grasshopper. The three levels of performance (1.5, 3, and 4 hours) in EN 17037 can be used to derive spatial metrics for building performance. We propose a new metric called Sunlight Autonomy (SA) for building facades. SA can be defined as the percentage of façade area (m2) that is above a performance level e.g., 1.5 hours. Other ways to conceptualize SA on an annual basis can be: a) the percentage of days that receive more than 1.5 hours of direct sun, or b) the percentage of time that direct sun hits the grid point. Then, the spatial SA (sSA) is the percentage of façade area above a defined threshold i.e., a) of hours/day or b) of time/daylight hours. We suggest that SA assessments on 3D models with the European Daylight Standard restrictions can reduce uncertainty and enhance the performance comparability of projects. It can also serve as a flexible and new evaluation method for designers and planning authorities. Further work should investigate more latitudes and urban typologies for recommendations of the SA metrics.
|
|
| 3. |
- Dervishaj, Arlind, et al.
(författare)
-
A digital workflow for assessing lifespan, carbonation, and embodied carbon of reusing concrete in buildings
- 2024
-
Ingår i: Journal of Building Engineering. - : Elsevier. - 2352-7102. ; 96, s. 1-23
-
Tidskriftsartikel (refereegranskat)abstract
- Concrete is the most used construction material, accounting for 8% of global CO2 emissions. Various strategies aim to reduce concrete's embodied carbon, such as using supplementary cementitious materials, utilizing cleaner energy, and carbonation. However, a large potential lies in reusing concrete for new buildings in a Circular Economy, thereby closing material loops and avoiding CO2 emissions.This study focuses on the reuse of precast concrete elements. We present a digital workflow for assessing reuse by predicting the remaining service life, estimating CO2 uptake by natural carbonation, and calculating the embodied carbon savings of concrete reuse. Both carbonation rates from EN 16757 and our investigation were applied to a case study building.While EN 16757 rates suggest that most precast elements have reached the end of their service life, our assessment shows that these elements have a sufficient lifespan for reuse. Plaster and coverings significantly delay carbonation and extend service life. During the first service life following EN 16757, carbonation was 19,2 kg CO2/m3, whereas our prediction was 5,4 kg CO2/m3. Moreover, CO2 uptake during service life, including reuse, was less than 6% of the embodied carbon. The climate benefits of reuse greatly exceeded those of carbonation.Furthermore, carbonation did not have a decisive influence when applying Cut-Off, Distributed, and End-of-Life allocations for assessing embodied carbon of re-used elements in subsequent life cycles. The digital workflow is useful in quickly assessing lifespan, carbonation, and embodied carbon of concrete. It can be leveraged as a decision-making tool when designing for reuse.
|
|
| 4. |
- Dervishaj, Arlind, et al.
(författare)
-
Digital Reuse : Leveraging technology for a circular built environment
- 2023
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Buildings are major contributors to climate change. Reusing buildings and materials in a circular economy is a promising solution, but we need methods and tools to support it. Therefore, we develop digital innovations to support the reuse of concrete, a ubiquitous construction material that represents 7-8% of global C02 emissions. In this poster, we present our research progress concerning two refereed publications presented at eCAADe and EC3 & CIB W78 conferences, both published in 2023.
|
|
| 5. |
- Dervishaj, Arlind, et al.
(författare)
-
Enabling reuse of prefabricated concrete components through multiple tracking technologies and digital twins
- 2023
-
Ingår i: Proceedings of the 2023 European Conference on Computing in Construction and the 40th International CIB W78 Conference. - Heraklion, Crete : European Council for Computing in Construction. ; , s. 1-8
-
Konferensbidrag (refereegranskat)abstract
- Tracking of building components can be instrumental in reuse for a Circular Economy. Tracking technologies (TT) for building components can be used to identify and access information for decision-making from deconstruction to design for reuse. Prior research has mainly been concerned with single technologies, limited life cycle applicability and new construction. This study aims to explore the potential of combining multiple technologies, such as QR codes, NFC, and Bluetooth tags, with BIM to support reuse along the life cycles of prefabricated concrete components. The benefits and limitations of choices in TT are examined concerning information integration in circular construction.
|
|
| 6. |
- Dervishaj, Arlind, et al.
(författare)
-
From LCA to circular design : A comparative study of digital tools for the built environment
- 2024
-
Ingår i: Resources, Conservation and Recycling. - : Elsevier BV. - 0921-3449 .- 1879-0658. ; 200, s. 1-19
-
Tidskriftsartikel (refereegranskat)abstract
- This paper reviews digital tools for supporting the Circular Economy (CE) in the built environment. The study provides a bibliometric analysis and focuses on computer-aided design (CAD), building information modeling (BIM), and computational plugins that can be used by practitioners. While Life Cycle Assessment (LCA) is the primary methodology for evaluating buildings' environmental performance, the study identifies tools beyond LCA, including computational methods and circularity indicators, that can support the evaluation of circular design strategies. Our review highlights limitations in tools’ functionalities, including a lack of representative data for LCA and underdeveloped circularity indicators. The paper calls for further development of these tools in terms of interoperability aspects, integration of more sources of data for LCA and circularity, and possibilities for a comprehensive evaluation of design choices. Computational plugins offer greater flexibility, while BIM-LCA integrations have the potential to replace dedicated LCA software and spreadsheets. Additionally, the study identifies opportunities for novel digital methods, such as algorithms for circular design with various types of reused building elements, and sharing of digital twins and material passports. This research can inform future studies and support architects and engineers in their efforts to create a sustainable built environment.
|
|
| 7. |
- Dervishaj, Arlind
(författare)
-
From Sustainability to Regeneration : a digital framework with BIM and computational design methods
- 2023
-
Ingår i: Architecture, Structures and Construction. - : Springer Nature. - 2730-9886 .- 2730-9894. ; 3:3, s. 315-336
-
Tidskriftsartikel (refereegranskat)abstract
- Design methods, frameworks, and green building certifications have been developed to create a sustainable built environment. Despite sustainability advancements, urgent action remains necessary due to climate change and the high impact of the built environment. Regenerative Design represents a shift from current practices focused on reducing environmental impacts, as it aims to generate positive effects on both human and natural systems. Although digital design methods are commonly employed in sustainable design practice and research, there is presently no established framework to guide a digital regenerative design process. This study provides an analysis of existing literature on regenerative design and digital design methods and presents a framework based on building information modelling (BIM) methodology and computational design methods, that can be applied to both urban and building design. This framework identifies digital tools and organizes indicators based on the pillars of climate, people, and nature for regenerative design, drawing upon a comprehensive analysis of literature, including standards, sustainability frameworks and research studies. The framework is illustrated through a case study evaluation. The paper also highlights the potential and limitations of digital methods concerning regenerative design and suggests possibilities for future expansion by incorporating additional quantifiable indicators that reflect research developments, to achieve positive outcomes.
|
|
| 8. |
- Dervishaj, Arlind, et al.
(författare)
-
Modelling Precast Concrete for a Circular Economy in the Built Environment : Level of Information Need guidelines for digital design and collaboration
- 2023
-
Ingår i: eCAADe 2023. - Brussels, Graz : Graz University of Technology Faculty of Architecture. ; , s. 177-186
-
Konferensbidrag (refereegranskat)abstract
- In recent years, there has been a growing interest in adopting circular approaches in the built environment, specifically reusing existing buildings or their components in new projects. To achieve this, drawings, laser scanning, photogrammetry and other techniques are used to capture data on buildings and their materials. Although previous studies have explored scan-to-BIM workflows, automation of 2D drawings to 3D models, and machine learning for identifying building components and materials, a significant gap remains in refining this data into the right level of information required for digital twins, to share information and for digital collaboration in designing for reuse. To address this gap, this paper proposes digital guidelines for reusing precast concrete based on the level of information need (LOIN) standard EN 17412-1:2020 and examines several CAD and BIM modelling strategies. These guidelines can be used to prepare digital templates that become digital twins of existing elements, develop information requirements for use cases, and facilitate data integration and sharing for a circular built environment.
|
|
| 9. |
- Dervishaj, Arlind
(författare)
-
Operationalization of Regenerative Design Indicators : An Integrated Framework of Design and Analysis
- 2023
-
Ingår i: Proceedings of the UIA World Congress of Architects Copenhagen 2023. - : Springer Nature. ; , s. 175-183
-
Konferensbidrag (refereegranskat)abstract
- Different frameworks, sustainable design theories, and green building rating systems have been developed to reduce environmental impact on the planet. However, environmental challenges are growing due to climate change. The impact of the built environment on the planet requires an immediate transformation to achieve the sustainable development goals (SDG) and Paris Agreement. This study reviews some key concepts of regenerative design (RD), and how this can be integrated with state-of-the-art digital design methods. Even though building information modelling and design computation are of interest, their use and discussion have focused on sustainability rather than regeneration. Thus, there is a gap when it comes to their use for regenerative design. For this purpose, an integrated design and analysis framework is proposed where methods, processes, and tools can be used to measure indicators for regenerative design. The framework can be applied to case studies by researchers or designers and further expanded in future research.
|
|
| 10. |
- Dervishaj, Arlind, et al.
(författare)
-
Sunlight Autonomy for Buildings: A New Methodology for Evaluating Sunlight Performance in Urban and Architectural Design
- 2024
-
Ingår i: LEUKOS The Journal of the Illuminating Engineering Society of North America. - : Informa UK Limited. - 1550-2724 .- 1550-2716. ; , s. 1-31
-
Tidskriftsartikel (refereegranskat)abstract
- Due to urbanization and growing density in cities in the past century, metrics were introduced to assess daylight performance such as minimum sunlight hours and the daylight factor. The paper initially explores the shortcomings of early-stage daylight and sunlight evaluation methods. A novel methodology called Sunlight Autonomy (SA) is proposed for evaluating sunlight performance in buildings. The SA is based on the “Exposure to sunlight” criteria in EN 170307 “Daylight in Buildings,” where a computational method is used for the evaluation on a specified day. The SA concept expands the analysis temporally over the entire year, and spatially on building facades, leading to new metrics for a point of evaluation, and spatial metrics for buildings. The SA methodology is analyzed in a case study across four European cities. The SA metrics on facades between February 1st and March 21st, days in EN 17037, led to differences up to 63%. This revealed a significant shortcoming in EN 17037, relevant for Nordic regions. The differences of spatial metrics between March 21st and 50% of the year were within 5%, and up to 33% between February 1st and 75% of the year. The timestep affects the metrics and a window evaluation showed that the error of a 10-minute analysis was within 5% of daily insolation and 5 days for the annual SA. The potential of these metrics for urban planning and the architectural design process is examined. The interaction between SA and EN 17037, as well as other ongoing research developments, is discussed.
|
|
| 11. |
- Dervishaj, Arlind
(författare)
-
Sunlight Autonomy for Sustainable Buildings and Cities : Maximizing daylight potential outdoors and indoors
- 2024
-
Konferensbidrag (refereegranskat)abstract
- Daylight, both outdoors and indoors, is essential for human well-being. However, daylight provision often faces challenges in various climates and locations, due to factors such as shortcomings in regulations, urban densification, deregulation or special exemptions, and the limitations of existing daylight and sunlight evaluation methods. To address these issues, we propose the Sunlight Autonomy, a new methodology and set of metrics, that aims to overcome the limitations of existing early-stage daylighting metrics and is valuable for urban planning and architectural design purposes.
|
|
| 12. |
- Elshani, Diellza, et al.
(författare)
-
An Ontology for the Reuse and Tracking of Prefabricated Building Components
- 2024
-
Ingår i: The 2nd International Workshop on Knowledge Graphs for Sustainability (KG4S 2024), Hersonissos, Greece, May 27th, 2024.. - Hersonissos : RWTH Aachen University. ; , s. 53-64
-
Konferensbidrag (refereegranskat)abstract
- Several assessment methodologies have been proposed to measure the environmental impact of buildings. However, these methodologies require processing data which is often not available or requires a high integration effort. In this paper, we propose an ontology to describe the use and reuse of prefabricated components in buildings. This ontology describes the relation between the physical object, the building component, with the digital object that represents the element in the building information model. We show that this ontology can be used to answer questions like which building components have been reused and which activities were involved in the life cycle of a building.
|
|
