| 1. |
- Baker, Darren A, et al.
(författare)
-
Structural carbon fibre from kraft lignin
- 2017
-
Ingår i: The 7th Nordic Wood Biorefinery Conference held in Stockholm, Sweden, 28-30 Mar. 2017. - Stockholm : RISE Bioekonomi. - 9789186018207 ; , s. 65-67
-
Konferensbidrag (refereegranskat)abstract
- The GreenLight consortium is working to demonstrate a biobased, renewable and economically viable carbon fibre from lignin. The aim is to provide a basis for commercial production of lignin, lignin filaments, carbon fibre and carbon fibre composites. The most difficult boundary to success in the developing lignin as a precursor for continuous filament carbon fibre has been identified as melt extrusion of lignin. The consortium is working to develop a robust melt spinning platform for use up to the 1,000 filament scale. Methodical studies have been performed to examine lignin separation from differing black liquors derived from both softwood and hardwood and assess their viability in terms of thermal, compositional and structural properties. The move will then be made to pilot scale melt spinning at the 100 filament scale. The characteristics of some kraft lignin fractions obtained from the same Sodra Monsteras softwood kraft black liquor have been studied. The lignins were manufactured in quantities of approximately 10-20kg. Several variations of the LignoBoost process were used to provide lignins with improved melt spinning properties. The lignins were of high purity, each having low carbohydrate, extractives and inorganic contents. All four lignins could be melt spun and converted to carbon fibre.
|
|
| 2. |
- Baker, Darren, et al.
(författare)
-
Lignin-based carbon fiber : effect of softwood kraft lignin separation method on multifilament melt-spinning performance and conversion
- 2019
-
Ingår i: 20th International symposium on wood, fiber, and pulping chemistry.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- A reference lignin separated from an industrial softwood kraft black liquor via an improved LignoBoost process was compared to four other lignins derived from the same liquor. The four lignins were produced by using a) pH-fractionation within the LignoBoost process, b) ultrafiltration of black liquor prior to the LignoBoost process, and c) solvent leaching of the reference lignin using methanol and d) ethanol.Lignin compositional characteristics and thermal properties were compared, and monofilament extrusion used to assess their potential for successful melt spinning at the 24 filament scale. The lignin prepared by ethanol leaching of the reference lignin was found to be most appropriate for potential pilot scale fibre production. This was owing to a high purity, lower comparative glass transition temperature (Tg), and good spinning performance.Thermal pretreatments of the ethanol leached lignin gave a selection of enhanced lignins which were characterized for comparison, and melt spun on pilot multifilament equipment. The enhanced lignins could be continuously melt spun giving filaments with diameters as low as 10 μm and with minimal defects. Conversion of selected filaments provided carbon fibres with a tensile strength of 1259 ± 159 MPa, tensile modulus of 67 ± 3 GPa and diameter of 7.3 ± 0.5 μm.
|
|
| 3. |
- Janssen, Mathias, 1973, et al.
(författare)
-
Life cycle assessment of lignin-based carbon fibres
- 2019
-
Ingår i: 14th Conference on sustainable development of energy, water and environment systems.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Lignin-based carbon fibres may replace both glass fibres and fossil-based carbon fibres. The objective of this study was to determine the environmental impact of the production of lignin-based carbon fibres using life cycle assessment. The life cycle assessment was done from cradle to gate and followed an attributional approach. The climate impact per kg of lignin- based carbon fibres produced was 1.50 kg CO2,eq. In comparison to glass fibres, the climate impact was reduced by 32% and the climate impact of fossil-based carbon fibres was an order of magnitude higher. A prospective analysis, in which the background energy system was cleaner, showed that the environmental impact of lignin-based carbon fibres will decrease and outperform the glass fibres and fossil-based carbon fibres from a climate impact point-of-view. The constructed LCA model can be applied in further studies of products that consist of or use lignin-based carbon fibres.
|
|
