| 1. |
- Adolfsson, Daniel, et al.
(författare)
-
Cementitious phases in ladle slag
- 2011
-
Ingår i: Steel Research International. - : Wiley. - 1611-3683 .- 1869-344X. ; 82:4, s. 398-403
-
Tidskriftsartikel (refereegranskat)abstract
- Ladle slag is an internal by-product generated within the steelmaking industry during the refining of steel. The realisation of beneficial inherent properties of ladle slag as a binder supplement or substitute material is believed to be advantageous with respect to both economy and environment for steelmakers. For this reason, the current study has focused on highlighting the properties of ladle slag that are pertinent to the formation of calcium aluminate hydrates. Three fractions of ladle slag, two of which were based on different slag formers, have been characterised using XRF, XRD and calorimetric analysis. Commonly known hydraulic minerals such as mayenite, tricalcium aluminate and dicalcium silicate were detected during analysis. An important aspect in the utilisation of ladle slag is the slag handling methodology. Therefore, this study also highlights and discusses the need to reconsider slag handling procedures concerning unnecessary exposure to weathering and the possible need for further processing of the slag in order to better employ the inherent hydraulic properties of this material.
|
|
| 2. |
- Adolfsson, Daniel, et al.
(författare)
-
Influence of mineralogy on the hydraulic properties of ladle slag
- 2011
-
Ingår i: Cement and Concrete Research. - : Elsevier BV. - 0008-8846 .- 1873-3948. ; 41:8, s. 865-871
-
Tidskriftsartikel (refereegranskat)abstract
- The present study is aimed at investigating the hydraulic characteristics of ladle furnace slag (LFS), under the pretence of using LFS as a cement substitute in certain applications. Furthermore, LFS has been considered as a possible activator in a blend containing 50% LFS, and 50% ground granulated blast furnace slag (GGBFS). Phases detected in LFS were quantified using Rietveld analysis. Calorimetric studies were performed at 20, 25 and 30 °C in order to calculate the apparent activation energy of hydration and thereby to suggest a kinetic model for the tested compositions within this temperature interval. In addition, compressive strength tests were performed on mortar prisms made with LFS, and LFS/GGBFS which had hydrated for 2, 7 and 28 days. Both compositions reached acceptable early strengths, (e.g. LFS, 33.1 MPa, and LFS/GGBFS, 17.9 MPa, after 2 days), but after 28 days hydration the blend was superior to neat LFS. Related apparent activation energies were determined using an Avrami–Erofeev model and gave Ea = 58 kJ/mol for neat LFS and Ea = 63 kJ/mol for the blend. The results imply that LFS or a LFS/GGBFS blend can be favourably used as supplement in binder applications such as binder in by-product metallurgical briquettes, which are used as recycle to the blast furnace or basic oxygen furnace depending on the specific briquette composition.
|
|
| 3. |
- Crespo, Alejandro J., et al.
(författare)
-
On the state-of-the-art of CFD simulations for wave energy converters within the open-source numerical framework of DualSPHysics
- 2023
-
Ingår i: Proceedings of the 15th European Wave and Tidal Energy Conference, Bilbao, 3-7 September 2023. - : European Wave and Tidal Energy Conference.
-
Konferensbidrag (refereegranskat)abstract
- There are currently several types of devices capable of harnessing wave energy, exploiting a broad variety of physical transformation processes. These devices – known as Wave Energy Converters (WECs) – are developed to maximize their power output. However, there are still uncertainties about their response and survivability to loads induced by adverse environmental conditions, with a consequent increase of the Levelized Cost of Energy (LCOE), which prevents in fact their commercial diffusion. As evidenced by a large body of research, marine renewable energy devices need to have more robust design practices. To address this issue, we propose the CFD-based DualSPHysics toolbox as a support in the design stages. DualSPHysics is high-fidelity software inherently suited to numerically address most challenges posed by multiphysics simulations, which are required to reliably predict WEC response in situations well beyond operational conditions. It should be noted that WECs, generally, may be connected to the seabed and comprise mechanical systems named Power Take-Offs (PTO) used to convert the energy from waves into electricity or other usable energies. To reproduce these features, DualSPHysics benefits from coupling with the multiphysics library Project Chrono and the dynamic mooring model Moordyn+. In this work, the augmented DualSPHysics framework is utilised to simulate a range of very different types of WECs with a variety of elements, such as catenary connections, taut mooring lines, or linear and nonlinear PTO actuators. Version 5.2 of the open-source licensed code was recently released, making the numerical framework publicly available as one unit. This work aims to provide a numerical review of past applications, and to demonstrate how the same open-source code is able to simulate very different technologies.Specifically, this paper proposes routine modeling and validation procedures using the SPH-based solver DualSPHysics applied to five different WEC types: i) a moored point absorber (PA); ii) an oscillating wave surge converter (OWSC); iii) a floating OWSC (so called FOSWEC); iv) a wave energy hyperbaric converter (WEHC); and v) a multi-body attenuator (so called Multi-float M4). For each device listed above, we provide validation proof against physical model data for various components of the floater(s) and PTO related quantities, performed under specific sea conditions that aim to challenge their survivability. Within the scope of this research, we present the WEC response with respect to the degrees of freedom that really matter for each of the floatings due to hydrodynamic interactions (i.e., heave, surge, and pitch), along with quantities more intimately connected to the anchoring systems (e.g., line tension) or the mechanical apparatus (e.g., end-stopper force). The quality of the results, the discussion built upon them and the demonstrated solver exploitability to a wide range of WECs show that one software model can run all cases using the exact same methodology, which is of great value for the marine energy R&D community. Finally, we discuss future research objectives, which include the implementation of automation to apply open control systems and possible applications to subsets of WEC farm arrays and other floating energy harnessing devices.
|
|
| 4. |
- Engström, Fredrik, et al.
(författare)
-
Leaching Behavior of Aged Steel Slags
- 2014
-
Ingår i: Steel Research International. - : Wiley. - 1611-3683 .- 1869-344X. ; 85:4, s. 607-615
-
Tidskriftsartikel (refereegranskat)abstract
- Large amounts of slag are generated by the Swedish Steel Industry each year. The Electric Arc Furnace process generates about 200 000 ton of slag per annum, from which approximately 40% is deposited. An alternative to deposit is to use slag as road construction material. However, leaching of metals from the slag can be a reason to limit slag use in road construction. The aim of this work was to investigate how stable these materials are when aged, in an environment open to seasonable weather conditions, with respect to leaching and mineralogy. Three different EAF-slags from domestic steel plants were used in this study. The materials were characterized after 0, 6, 12, 18, and 24 months to evaluate the ageing process. The analytical techniques that were used to evaluate the effect of ageing are scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and a standard test for leaching. The changes in ageing behavior differ between the three materials. The conductivity and the pH decreases with time for all samples. The leaching of calcium, chromium as well as aluminum decreases with time while the leaching of magnesium increases. CaCO3 was formed on slag surfaces as CaO reacts with moisture and CO2 from the air.
|
|
| 5. |
|
|
| 6. |
- Ottosson, Filip, et al.
(författare)
-
The inverse association between a fish consumption biomarker and gingival inflammation and periodontitis : A population-based study
- 2022
-
Ingår i: Journal of Clinical Periodontology. - : Wiley. - 0303-6979 .- 1600-051X. ; 49:4, s. 353-361
-
Tidskriftsartikel (refereegranskat)abstract
- Aim: The metabolite 3-carboxy-4-methyl-5-propyl-2-furanpropionic acid (CMPF) is a fatty fish–intake biomarker. We investigated the association between plasma levels of CMPF in relation to gingival inflammation and periodontitis case definition, as well as the extent and severity variables. Materials and Methods: The Malmö Offspring Study is a population-based study, and the Malmö Offspring Dental Study (MODS) is its dental arm, including periodontal charting. Plasma CMPF was measured using liquid chromatography–mass spectrometry and studied in relation to periodontal diagnosis and parameters using multivariable linear or logistic regression modelling adjusting for age, sex, education, body mass index, fasting glucose, and smoking. Results: Metabolite data were available for 922 MODS participants. Higher CMPF levels were associated with less gingival inflammation (β = −2.12, p =.002) and lower odds of severe periodontitis (odds ratio [OR] = 0.74, 95% confidence interval [CI]: 0.56 to 0.98). Higher CMPF levels were also associated with more teeth (β = 0.19, p =.001), lower number of periodontal pockets (≥4 mm) (β = −1.07, p =.007), and lower odds of having two or more periodontal pockets of ≥6 mm (OR = 0.80, 95% CI: 0.65 to 0.98) in fully adjusted models. Conclusions: CMPF, a validated biomarker of fatty fish consumption, is associated with less periodontal inflammation and periodontitis. Residual confounding cannot be ruled out, and future studies are warranted.
|
|
| 7. |
- Ottosson, Filip, et al.
(författare)
-
The inverse association between a fish consumption biomarker with gingival inflammation and periodontitis : a population-based study
- 2022
-
Ingår i: Journal of Clinical Periodontology. - : John Wiley & Sons. - 0303-6979 .- 1600-051X. ; 49:4, s. 353-361
-
Tidskriftsartikel (refereegranskat)abstract
- AIM: The metabolite 3-Carboxy-4-methyl-5-propyl-2-furanpropionic acid (CMPF) is a fatty fish-intake biomarker. We investigated the association between plasma levels of CMPF in relation to gingival inflammation and periodontitis case definition, as well as extent and severity variables.METHODS: The Malmö Offspring Study (MOS) is a population-based study, and the Malmö Offspring Dental Study (MODS) is its dental arm, including periodontal charting. Plasma CMPF was measured using liquid chromatography-mass spectrometry and studied in relation to periodontal diagnosis and parameters using multivariable linear or logistic regression modelling adjusting for age, sex, education, BMI, fasting glucose and smoking.RESULTS: Metabolite data were available for 922 MODS participants. Higher CMPF levels were associated with less gingival inflammation (beta -2.12, p=0.002), and lower odds of severe periodontitis (OR 0.74, 95% CI=0.56-0.98). Higher CMPF levels were also associated with more teeth (beta 0.19, p=0.001), lower number of periodontal pockets (>4 mm) (beta -1.07, p=0.007) and lower odds of having two or more >6 mm periodontal pockets (OR 0.80, 95% CI=0.65-0.98) in fully adjusted models.CONCLUSION: CMPF, a validated biomarker of fatty fish consumption, is associated with less periodontal inflammation and periodontitis. Residual confounding cannot be ruled out and future studies are warranted. This article is protected by copyright. All rights reserved.
|
|
| 8. |
- Pulit, SL, et al.
(författare)
-
Loci associated with ischaemic stroke and its subtypes (SiGN): a genome-wide association study.
- 2016
-
Ingår i: The Lancet. Neurology. - 1474-4465. ; 15:2, s. 174-84
-
Tidskriftsartikel (refereegranskat)abstract
- The discovery of disease-associated loci through genome-wide association studies (GWAS) is the leading genetic approach to the identification of novel biological pathways underlying diseases in humans. Until recently, GWAS in ischaemic stroke have been limited by small sample sizes and have yielded few loci associated with ischaemic stroke. We did a large-scale GWAS to identify additional susceptibility genes for stroke and its subtypes.To identify genetic loci associated with ischaemic stroke, we did a two-stage GWAS. In the first stage, we included 16851 cases with state-of-the-art phenotyping data and 32473 stroke-free controls. Cases were aged 16 to 104 years, recruited between 1989 and 2012, and subtypes of ischaemic stroke were recorded by centrally trained and certified investigators who used the web-based protocol, Causative Classification of Stroke (CCS). We constructed case-control strata by identifying samples that were genotyped on nearly identical arrays and were of similar genetic ancestral background. We cleaned and imputed data by use of dense imputation reference panels generated from whole-genome sequence data. We did genome-wide testing to identify stroke-associated loci within each stratum for each available phenotype, and we combined summary-level results using inverse variance-weighted fixed-effects meta-analysis. In the second stage, we did in-silico lookups of 1372 single nucleotide polymorphisms identified from the first stage GWAS in 20941 cases and 364736 unique stroke-free controls. The ischaemic stroke subtypes of these cases had previously been established with the Trial of Org 10172 in Acute Stroke Treatment (TOAST) classification system, in accordance with local standards. Results from the two stages were then jointly analysed in a final meta-analysis.We identified a novel locus (G allele at rs12122341) at 1p13.2 near TSPAN2 that was associated with large artery atherosclerosis-related stroke (first stage odds ratio [OR] 1·21, 95% CI 1·13-1·30, p=4·50×10(-8); joint OR 1·19, 1·12-1·26, p=1·30×10(-9)). Our results also supported robust associations with ischaemic stroke for four other loci that have been reported in previous studies, including PITX2 (first stage OR 1·39, 1·29-1·49, p=3·26×10(-19); joint OR 1·37, 1·30-1·45, p=2·79×10(-32)) and ZFHX3 (first stage OR 1·19, 1·11-1·27, p=2·93×10(-7); joint OR 1·17, 1·11-1·23, p=2·29×10(-10)) for cardioembolic stroke, and HDAC9 (first stage OR 1·29, 1·18-1·42, p=3·50×10(-8); joint OR 1·24, 1·15-1·33, p=4·52×10(-9)) for large artery atherosclerosis stroke. The 12q24 locus near ALDH2, which has previously been associated with all ischaemic stroke but not with any specific subtype, exceeded genome-wide significance in the meta-analysis of small artery stroke (first stage OR 1·20, 1·12-1·28, p=6·82×10(-8); joint OR 1·17, 1·11-1·23, p=2·92×10(-9)). Other loci associated with stroke in previous studies, including NINJ2, were not confirmed.Our results suggest that all ischaemic stroke-related loci previously implicated by GWAS are subtype specific. We identified a novel gene associated with large artery atherosclerosis stroke susceptibility. Follow-up studies will be necessary to establish whether the locus near TSPAN2 can be a target for a novel therapeutic approach to stroke prevention. In view of the subtype-specificity of the associations detected, the rich phenotyping data available in the Stroke Genetics Network (SiGN) are likely to be crucial for further genetic discoveries related to ischaemic stroke.US National Institute of Neurological Disorders and Stroke, National Institutes of Health.
|
|
| 9. |
- Sitch, Stephen, et al.
(författare)
-
Assessing the carbon balance of circumpolar Arctic tundra using remote sensing and process modeling
- 2007
-
Ingår i: Ecological Applications. - : John Wiley & Sons. - 1051-0761 .- 1939-5582. ; 17:1, s. 213-234
-
Tidskriftsartikel (refereegranskat)abstract
- This paper reviews the current status of using remote sensing and process-based modeling approaches to assess the contemporary and future circumpolar carbon balance of Arctic tundra, including the exchange of both carbon dioxide and methane with the atmosphere. Analyses based on remote sensing approaches that use a 20-year data record of satellite data indicate that tundra is greening in the Arctic, suggesting an increase in photosynthetic activity and net primary production. Modeling studies generally simulate a small net carbon sink for the distribution of Arctic tundra, a result that is within the uncertainty range of field-based estimates of net carbon exchange. Applications of processbased approaches for scenarios of future climate change generally indicate net carbon sequestration in Arctic tundra as enhanced vegetation production exceeds simulated increases in decomposition. However, methane emissions are likely to increase dramatically, in response to rising soil temperatures, over the next century. Key uncertainties in the response of Arctic ecosystems to climate change include uncertainties in future fire regimes and uncertainties relating to changes in the soil environment. These include the response of soil decomposition and respiration to warming and deepening of the soil active layer, uncertainties in precipitation and potential soil drying, and distribution of wetlands. While there are numerous uncertainties in the projections of process-based models, they generally indicate that Arctic tundra will be a small sink for carbon over the next century and that methane emissions will increase considerably, which implies that exchange of greenhouse gases between the atmosphere and Arctic tundra ecosystems is likely to contribute to climate warming.
|
|
| 10. |
|
|
