| 1. |
|
|
| 2. |
- Bromark, M, et al.
(författare)
-
Influence of recoating on the mechanical and tribological performance of TiN-coated HSS
- 1995
-
Ingår i: SURFACE & COATINGS TECHNOLOGY. - : ELSEVIER SCIENCE SA LAUSANNE. - 0257-8972. ; 77:1-3, s. 481-486
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- In the manufacturing industry, there is a pronounced economic interest in the recoating of used tools. The influence of recoating on the mechanical (composite hardness, scratch test response and residual stress) and tribological (intrinsic abrasive wear r
|
|
| 3. |
- Gahlin, R, et al.
(författare)
-
A novel method to map and quantify wear on a micro-scale
- 1998
-
Ingår i: WEAR. - : ELSEVIER SCIENCE SA. - 0043-1648. ; 222:2, s. 93-102
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The present work first introduces and then demonstrates the possibilities of a novel high resolution topographical difference method. The method comprises two techniques to measure the actual local wear volume and to map the distribution of wear. Both tec
|
|
| 4. |
- Gahlin, R, et al.
(författare)
-
Micromechanical manufacturing of abrasive surfaces for fundamental studies on wear and grinding
- 1998
-
Ingår i: WEAR. - : ELSEVIER SCIENCE SA. - 0043-1648. ; 217:2, s. 231-236
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- An etching procedure has been developed with the objective to produce silicon abrasive surfaces in a controlled and reproducible way. These surfaces are intended for studies of fundamental aspects of abrasion. The procedure is based on techniques commonly
|
|
| 5. |
- Gahlin, R, et al.
(författare)
-
Properties of TiN and CrN coatings deposited at low temperature using reactive arc-evaporation
- 1995
-
Ingår i: SURFACE & COATINGS TECHNOLOGY. - : ELSEVIER SCIENCE SA LAUSANNE. - 0257-8972. ; 76:1-3, s. 174-180
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- PVD TiN and CrN coatings were deposited at both low (approximate to 200 degrees C) and standard temperatures (approximate to 400 degrees C) using reactive arc-evaporation Variations in microstructure (obtained by TEM and XRD), morphology (studied using SE
|
|
| 6. |
- Gahlin, R, et al.
(författare)
-
The crater grinder method as a means for coating wear evaluation - An update
- 1997
-
Ingår i: SURFACE & COATINGS TECHNOLOGY. - : ELSEVIER SCIENCE SA LAUSANNE. - 0257-8972. ; 90:1-2, s. 107-114
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The crater grinder test has been developed in order to obtain the abrasive resistance of thin coatings. It is capable of determining the specific abrasive wear rate of the coating and the substrate individually, even for very thin coatings. This paper rep
|
|
| 7. |
- Gahlin, R, et al.
(författare)
-
The effects of compressive stresses on the abrasion of diamond coatings
- 1996
-
Ingår i: WEAR. - : ELSEVIER SCIENCE SA LAUSANNE. - 0043-1648. ; 196:1-2, s. 226-233
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The effects of high biaxial compressive stresses on the abrasion of diamond coatings by diamond particles were evaluated using an atomic force microscope (AFM). The specimens subjected to testing were diamond coatings deposited on cemented carbide substra
|
|
| 8. |
- Gahlin, R, et al.
(författare)
-
The influence of tip shape in abrasion studied by controlled multiasperity surfaces
- 1998
-
Ingår i: WEAR. - : ELSEVIER SCIENCE SA. - 0043-1648. ; 223:1-2, s. 150-156
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The influence of abrasive tip angle, tip blunting and tip packing density on the wear rate has been studied using controlled multiasperity surfaces of silicon. The surfaces were manufactured by micromechanical etching techniques and controlled with respec
|
|
| 9. |
- Gahlin, R, et al.
(författare)
-
The particle size effect in abrasion studied by controlled abrasive surfaces
- 1999
-
Ingår i: WEAR. - : ELSEVIER SCIENCE SA. - 0043-1648. ; 224:1, s. 118-125
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The effect of abrasive particle size on the wear rate is well known. For small particles the wear rate increases with increasing particle size. Above some critical size the wear rate becomes almost independent of further size increases. Several theories h
|
|
