| 1. |
- Björn, Linnea, 1994, et al.
(författare)
-
Process-Induced Structures of Injection-Molded High-Density Polyethylene─Combining X-ray Scattering and Finite Element Modeling
- 2024
-
Ingår i: ACS Applied Polymer Materials. - 2637-6105. ; 6:8, s. 4852-4864
-
Tidskriftsartikel (refereegranskat)abstract
- The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing conditions, making mechanical properties of the injection molded part difficult to predict. Here we show how scanning small- and wide-angle X-ray scattering, birefringence microscopy, and polarized light optical microscopy can be combined with injection molding simulations to shed light on the correlation between the polymer morphology of high-density polyethylene and processing conditions. The scattering data revealed that the complex layered structure highly depends on the pressure during the holding phase of injection molding. Furthermore, we identified specific work of flow as a main parameter to capture the changes in morphology induced by varying the process settings. Overall, a good agreement was found between experimental data and the computational simulations, suggesting that computational simulations can be further used to predict the multiphase morphology of injection molded parts.
|
|
| 2. |
- Björn, Linnea, 1994, et al.
(författare)
-
Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene
- 2023
-
Ingår i: ACS Applied Polymer Materials. - 2637-6105. ; 5:8, s. 6429-6440
-
Tidskriftsartikel (refereegranskat)abstract
- Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify the distributionof hierarchical structures present in injection-molded parts of low-densitypolyethylene (LDPE) with varying viscosities. By combining scatteringdata with results from injection molding simulations and tensile testing,we find that oriented shish-kebab structures, as well as elongatedspherulite structures consisting of semicrystalline ellipsoids, contributeto high ultimate tensile strength along the flow direction. Furthermore,we show that a higher degree of orientation is found close to theinjection gate and in LDPE with higher viscosity, consequently fromelevated shear and cooling rates present during the injection moldingprocess.
|
|
| 3. |
- Cann, Sophie Le, et al.
(författare)
-
Spatio-temporal evolution of hydroxyapatite crystal thickness at the bone-implant interface
- 2020
-
Ingår i: Acta Biomaterialia. - : Elsevier BV. - 1878-7568 .- 1742-7061. ; 116, s. 391-399
-
Tidskriftsartikel (refereegranskat)abstract
- A better understanding of bone nanostructure around the bone-implant interface is essential to improve longevity of clinical implants and decrease failure risks. This study investigates the spatio-temporal evolution of mineral crystal thickness and plate orientation in newly formed bone around the surface of a metallic implant. Standardized coin-shaped titanium implants designed with a bone chamber were inserted into rabbit tibiae for 7 and 13 weeks. Scanning measurements with micro-focused small-angle X-ray scattering (SAXS) were carried out on newly formed bone close to the implant and in control mature cortical bone. Mineral crystals were thinner close to the implant (1.8 ± 0.45 nm at 7 weeks and 2.4 ± 0.57 nm at 13 weeks) than in the control mature bone tissue (2.5 ± 0.21 nm at 7 weeks and 2.8 ± 0.35 nm at 13 weeks), with increasing thickness over healing time (+30 % in 6 weeks). These results are explained by younger bone close to the implant, which matures during osseointegration. Thinner mineral crystals parallel to the implant surface within the first 100 µm close to the implant indicate that the implant affects bone ultrastructure close to the implant, potentially due to heterogeneous interfacial stresses, and suggest a longer maturation process of bone tissue and difficulty in binding to the metal. The bone growth kinetics within the bone chamber was derived from the spatio-temporal evolution of bone tissue's nanostructure, coupled with microtomographic imaging. The findings indicate that understanding mineral crystal thickness or plate orientation can improve our knowledge of osseointegration.
|
|
| 4. |
- Casanova, Elisa A., et al.
(författare)
-
SAXS imaging reveals optimized osseointegration properties of bioengineered oriented 3D-PLGA/aCaP scaffolds in a critical size bone defect model
- 2023
-
Ingår i: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 294
-
Tidskriftsartikel (refereegranskat)abstract
- Healing large bone defects remains challenging in orthopedic surgery and is often associated with poor outcomes and complications. A major issue with bioengineered constructs is achieving a continuous interface between host bone and graft to enhance biological processes and mechanical stability. In this study, we have developed a new bioengineering strategy to produce oriented biocompatible 3D PLGA/aCaP nanocomposites with enhanced osseointegration. Decellularized scaffolds -containing only extracellular matrix- or scaffolds seeded with adipose-derived mesenchymal stromal cells were tested in a mouse model for critical size bone defects. In parallel to micro-CT analysis, SAXS tensor tomography and 2D scanning SAXS were employed to determine the 3D arrangement and nanostructure within the critical-sized bone. Both newly developed scaffold types, seeded with cells or decellularized, showed high osseointegration, higher bone quality, increased alignment of collagen fibers and optimal alignment and size of hydroxyapatite minerals.
|
|
| 5. |
- Corona, Patrick T., et al.
(författare)
-
Fingerprinting soft material nanostructure response to complex flow histories
- 2022
-
Ingår i: Physical Review Materials. - 2475-9953. ; 6:4
-
Tidskriftsartikel (refereegranskat)abstract
- Understanding the complex connection between flow-processing history, fluid structure, and fluid properties represents a grand challenge for the engineering and fundamental study of nanostructured soft materials. To address this challenge, we report measurements using scanning small-angle x-ray scattering in a fluidic four-roll mill (FFoRM), which enables rapid nanostructural characterization of complex fluids under an unprecedentedly diverse range of flow histories. Combining this technique with analysis of the Lagrangian deformation history of fluid elements, we demonstrate rapid mapping of orientational ordering of fluids' nanostructure along diverse deformation trajectories that emulate those encountered in flow processing. Using demonstrative experiments on model rodlike nanoparticle dispersions, we show that differences in rod flexibility and rod-rod interactions play a significant role in determining the fluid's anisotropic structural response to similar flow histories. An analysis of the coupling between measured particle alignment and interparticle correlations reveals these differences to arise from the nature and strength of interparticle interactions in flow. These measurement and analysis techniques produce large datasets that hold promise toward advancing process-structure-property models and inverse design processes of flows that are tailored to produce targeted nanostructures.
|
|
| 6. |
- Cunningham, John, et al.
(författare)
-
Critical appraisal of tubular putative eumetazoans from the Ediacaran Weng’an Doushantuo biota
- 2015
-
Ingår i: Proceedings of the Royal Society of London. Biological Sciences. - : The Royal Society. - 0962-8452 .- 1471-2954. ; 282, s. 1-9
-
Tidskriftsartikel (refereegranskat)abstract
- Molecular clock analyses estimate that crown-group animals began diversifying hundreds of millions of years before the start of the Cambrian period. However, the fossil record has not yielded unequivocal evidence for animals during this interval. Some of the most promising candidates for Precambrian animals occur in theWeng’an biota of South China, including a suite of tubular fossils assigned to Sinocyclocyclicus, Ramitubus, Crassitubus and Quadratitubus, that have been interpreted as soft-bodied eumetazoans comparable to tabulate corals. Here, we present new insights into the anatomy, original composition and phylogenetic affinities of these taxa based on data from synchrotron radiation X-ray tomographic microscopy, ptychographic nanotomography, scanning electron microscopy and electron probe microanalysis. The patterns of deformation observed suggest that the cross walls of Sinocyclocyclicus and Quadratitubus were more rigid than those of Ramitubus and Crassitubus. Ramitubus and Crassitubus specimens preserve enigmatic cellular clusters at terminal positions in the tubes. Specimens of Sinocyclocyclicus and Ramitubus have biological features that might be cellular tissue or subcellular structures filling the spaces between the crosswalls. These observations are incompatible with a cnidarian interpretation, in which the spaces between cross walls are abandoned parts of the former living positions of the polyp. The affinity of the Weng’an tubular fossils may lie within the algae.
|
|
| 7. |
- Finnilä, Mikko A J, et al.
(författare)
-
Mineral Crystal Thickness in Calcified Cartilage and Subchondral Bone in Healthy and Osteoarthritic Human Knees
- 2022
-
Ingår i: Journal of Bone and Mineral Research. - : Wiley. - 1523-4681 .- 0884-0431. ; 37:9, s. 1700-1710
-
Tidskriftsartikel (refereegranskat)abstract
- Osteoarthritis (OA) is the most common joint disease, where articular cartilage degradation is often accompanied with sclerosis of the subchondral bone. However, the association between OA and tissue mineralization at the nanostructural level is currently not understood. In particular, it is technically challenging to study calcified cartilage, where relevant but poorly understood pathological processes such as tidemark multiplication and advancement occur. Here, we used state-of-the-art microfocus small-angle X-ray scattering with a 5-μm spatial resolution to determine the size and organization of the mineral crystals at the nanostructural level in human subchondral bone and calcified cartilage. Specimens with a wide spectrum of OA severities were acquired from both medial and lateral compartments of medial compartment knee OA patients (n = 15) and cadaver knees (n = 10). Opposing the common notion, we found that calcified cartilage has thicker and more mutually aligned mineral crystals than adjoining bone. In addition, we, for the first time, identified a well-defined layer of calcified cartilage associated with pathological tidemark multiplication, containing 0.32 nm thicker crystals compared to the rest of calcified cartilage. Finally, we found 0.2 nm thicker mineral crystals in both tissues of the lateral compartment in OA compared with healthy knees, indicating a loading-related disease process because the lateral compartment is typically less loaded in medial compartment knee OA. In summary, we report novel changes in mineral crystal thickness during OA. Our data suggest that unloading in the knee might be involved with the growth of mineral crystals, which is especially evident in the calcified cartilage.
|
|
| 8. |
- Gao, Zirui, et al.
(författare)
-
High-speed tensor tomography: iterative reconstruction tensor tomography (IRTT) algorithm
- 2019
-
Ingår i: Acta Crystallographica Section A: Foundations and Advances. - 2053-2733. ; 75, s. 223-238
-
Tidskriftsartikel (refereegranskat)abstract
- The recent advent of tensor tomography techniques has enabled tomographic investigations of the 3D nanostructure organization of biological and material science samples. These techniques extended the concept of conventional X-ray tomography by reconstructing not only a scalar value such as the attenuation coefficient per voxel, but also a set of parameters that capture the local anisotropy of nanostructures within every voxel of the sample. Tensor tomography data sets are intrinsically large as each pixel of a conventional X-ray projection is substituted by a scattering pattern, and projections have to be recorded at different sample angular orientations with several tilts of the rotation axis with respect to the X-ray propagation direction. Currently available reconstruction approaches for such large data sets are computationally expensive. Here, a novel, fast reconstruction algorithm, named iterative reconstruction tensor tomography (IRTT), is presented to simplify and accelerate tensor tomography reconstructions. IRTT is based on a second-rank tensor model to describe the anisotropy of the nanostructure in every voxel and on an iterative error backpropagation reconstruction algorithm to achieve high convergence speed. The feasibility and accuracy of IRTT are demonstrated by reconstructing the nanostructure anisotropy of three samples: a carbon fiber knot, a human bone trabecula specimen and a fixed mouse brain. Results and reconstruction speed were compared with those obtained by the small-angle scattering tensor tomography (SASTT) reconstruction method introduced by Liebi et al. [Nature (2015), 527, 349–352]. The principal orientation of the nanostructure within each voxel revealed a high level of agreement between the two methods. Yet, for identical data sets and computer hardware used, IRTT was shown to be more than an order of magnitude faster. IRTT was found to yield robust results, it does not require prior knowledge of the sample for initializing parameters, and can be used in cases where simple anisotropy metrics are sufficient, i.e. the tensor approximation adequately captures the level of anisotropy and the dominant orientation within a voxel. In addition, by greatly accelerating the reconstruction, IRTT is particularly suitable for handling large tomographic data sets of samples with internal structure or as a real-time analysis tool during the experiment for online feedback during data acquisition. Alternatively, the IRTT results might be used as an initial guess for models capturing a higher complexity of structural anisotropy such as spherical harmonics based SASTT in Liebi et al. (2015), improving both overall convergence speed and robustness of the reconstruction.
|
|
| 9. |
- Georgiadis, Marios, et al.
(författare)
-
Nanostructure-specific X-ray tomography reveals myelin levels, integrity and axon orientations in mouse and human nervous tissue
- 2021
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723 .- 2041-1723. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Myelin insulates neuronal axons and enables fast signal transmission, constituting a key component of brain development, aging and disease. Yet, myelin-specific imaging of macroscopic samples remains a challenge. Here, we exploit myelin’s nanostructural periodicity, and use small-angle X-ray scattering tensor tomography (SAXS-TT) to simultaneously quantify myelin levels, nanostructural integrity and axon orientations in nervous tissue. Proof-of-principle is demonstrated in whole mouse brain, mouse spinal cord and human white and gray matter samples. Outcomes are validated by 2D/3D histology and compared to MRI measurements sensitive to myelin and axon orientations. Specificity to nanostructure is exemplified by concomitantly imaging different myelin types with distinct periodicities. Finally, we illustrate the method’s sensitivity towards myelin-related diseases by quantifying myelin alterations in dysmyelinated mouse brain. This non-destructive, stain-free molecular imaging approach enables quantitative studies of myelination within and across samples during development, aging, disease and treatment, and is applicable to other ordered biomolecules or nanostructures.
|
|
| 10. |
- Grünewald, Tilman A., et al.
(författare)
-
Mapping the 3D orientation of nanocrystals and nanostructures in human bone: Indications of novel structural features
- 2020
-
Ingår i: Science advances. - : American Association for the Advancement of Science (AAAS). - 2375-2548. ; 6:24
-
Tidskriftsartikel (refereegranskat)abstract
- Bone is built from collagen fibrils and biomineral nanoparticles. In humans, they are organized in lamellar twisting patterns on the microscale. It has been a central tenet that the biomineral nanoparticles are co-aligned with the bone nanostructure. Here, we reconstruct the three-dimensional orientation in human lamellar bone of both the nanoscale features and the biomineral crystal lattice from small-angle x-ray scattering and wide-angle x-ray scattering, respectively. While most of the investigated regions show well-aligned nanostructure and crystal structure, consistent with current bone models, we report a localized difference in orientation distribution between the nanostructure and the biomineral crystals in specific bands. Our results show a robust and systematic, but localized, variation in the alignment of the two signals, which can be interpreted as either an additional mineral fraction in bone, a preferentially aligned extrafibrillar fraction, or the result of transverse stacking of mineral particles over several fibrils.
|
|
| 11. |
- Guizar-Sicairos, Manuel, et al.
(författare)
-
Validation study of small-angle X-ray scattering tensor tomography
- 2020
-
Ingår i: Journal of Synchrotron Radiation. - 1600-5775 .- 0909-0495. ; 27, s. 779-787
-
Tidskriftsartikel (refereegranskat)abstract
- Small-angle scattering tensor tomography (SASTT) is a recently developed technique able to tomographically reconstruct the 3D reciprocal space from voxels within a bulk volume. SASTT extends the concept of X-ray computed tomography, which typically reconstructs scalar values, by reconstructing a tensor per voxel, which represents the local nanostructure 3D organization. In this study, the nanostructure orientation in a human trabecular-bone sample obtained by SASTT was validated by sectioning the sample and using 3D scanning small-angle X-ray scattering (3D sSAXS) to measure and analyze the orientation from single voxels within each thin section. Besides the presence of cutting artefacts from the slicing process, the nanostructure orientations obtained with the two independent methods were in good agreement, as quantified with the absolute value of the dot product calculated between the nanostructure main orientations obtained in each voxel. The average dot product per voxel over the full sample containing over 10 000 voxels was 0.84, and in six slices, in which fewer cutting artefacts were observed, the dot product increased to 0.91. In addition, SAXS tensor tomography not only yields orientation information but can also reconstruct the full 3D reciprocal-space map. It is shown that the measured anisotropic scattering for individual voxels was reproduced from the SASTT reconstruction in each voxel of the 3D sample. The scattering curves along different 3D directions are validated with data from single voxels, demonstrating SASTT's potential for a separate analysis of nanostructure orientation and structural information from the angle-dependent intensity distribution.
|
|
| 12. |
- Khayyeri, Hanifeh, et al.
(författare)
-
Achilles tendon compositional and structural properties are altered after unloading by botox
- 2017
-
Ingår i: Scientific Reports. - : NATURE PUBLISHING GROUP. - 2045-2322. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- Tendon function and homeostasis rely on external loading. This study investigates the biological mechanisms behind tendon biomechanical function and how the mechanical performance is affected by reduced daily loading. The Achilles tendons of 16 weeks old female Sprague Dawley rats (n = 40) were unloaded for 5 weeks by inducing muscle paralysis with botulinum toxin injections in the right gastrocnemius and soleus muscles. The contralateral side was used as control. After harvest, the tendons underwent biomechanical testing to assess viscoelasticity (n = 30 rats) and small angle X-ray scattering to determine the structural properties of the collagen fibrils (n = 10 rats). Fourier transform infrared spectroscopy and histological staining (n = 10 rats) were performed to investigate the collagen and proteoglycan content. The results show that the stiffness increased in unloaded tendons, together with an increased collagen content. Creep and axial alignment of the collagen fibers were reduced. Stress-relaxation increased whereas hysteresis was reduced in response to unloading with botox treatment. Our findings indicate that altered matrix deposition relies on mechanical loading to reorganize the newly formed tissue, without which the viscoelastic behavior is impaired. The results demonstrate that reduced daily loading deprives tendons of their viscoelastic properties, which could increase the risk of injury.
|
|
| 13. |
- Khayyeri, Hanifeh, et al.
(författare)
-
Diminishing effects of mechanical loading over time during rat Achilles tendon healing
- 2020
-
Ingår i: PLoS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 15:12 December
-
Tidskriftsartikel (refereegranskat)abstract
- Mechanical loading affects tendon healing and recovery. However, our understanding about how physical loading affects recovery of viscoelastic functions, collagen production and tissue organisation is limited. The objective of this study was to investigate how different magnitudes of loading affects biomechanical and collagen properties of healing Achilles tendons over time. Achilles tendon from female Sprague Dawley rats were cut transversely and divided into two groups; normal loading (control) and reduced loading by Botox (unloading). The rats were sacrificed at 1, 2- and 4-weeks post-injury and mechanical testing (creep test and load to failure), small angle x-ray scattering (SAXS) and histological analysis were performed. The effect of unloading was primarily seen at the early time points, with inferior mechanical and collagen properties (SAXS), and reduced histological maturation of the tissue in unloaded compared to loaded tendons. However, by 4 weeks no differences remained. SAXS and histology revealed heterogeneous tissue maturation with more mature tissue at the peripheral region compared to the center of the callus. Thus, mechanical loading advances Achilles tendon biomechanical and collagen properties earlier compared to unloaded tendons, and the spatial variation in tissue maturation and collagen organization across the callus suggests important regional (mechano-) biological activities that require more investigation.
|
|
| 14. |
- Liebi, Marianne, 1984, et al.
(författare)
-
3D nanoscale analysis of bone healing around degrading Mg implants evaluated by X-ray scattering tensor tomography
- 2021
-
Ingår i: Acta Biomaterialia. - : Elsevier BV. - 1878-7568 .- 1742-7061. ; 134, s. 804-817
-
Tidskriftsartikel (refereegranskat)abstract
- The nanostructural adaptation of bone is crucial for its biocompatibility with orthopedic implants. The bone nanostructure also determines its mechanical properties and performance. However, the bone's temporal and spatial nanoadaptation around degrading implants remains largely unknown. Here, we present insights into this important bone adaptation by applying scanning electron microscopy, elemental analysis, and small-angle X-ray scattering tensor tomography (SASTT). We extend the novel SASTT reconstruction method and provide a 3D scattering reciprocal space map per voxel of the sample's volume. From this reconstruction, parameters such as the thickness of the bone mineral particles are quantified, which provide additional information on nanostructural adaptation of bone during healing. We selected a rat femoral bone and a degrading ZX10 magnesium implant as model system, and investigated it over the course of 18 months, using a sham as control. We observe that the bone's nanostructural adaptation starts with an initially fast interfacial bone growth close to the implant, which spreads by a re-orientation of the nanostructure in the bone volume around the implant, and is consolidated in the later degradation stages. These observations reveal the complex bulk bone-implant interactions and enable future research on the related biomechanical bone responses. Statement of significance: Traumatic bone injuries are among the most frequent causes of surgical treatment, and often require the placement of an implant. The ideal implant supports and induces bone formation, while being mechanically and chemically adapted to the bone structure, ensuring a gradual load transfer. While magnesium implants fulfill these requirements, the nanostructural changes during bone healing and implant degradation remain not completely elucidated. Here, we unveil these processes in rat femoral bones with ZX10 magnesium implants and show different stages of bone healing in such a model system.
|
|
| 15. |
- Liebi, Marianne, 1984, et al.
(författare)
-
Small-angle X-ray scattering tensor tomography: Model of the three-dimensional reciprocal-space map, reconstruction algorithm and angular sampling requirements
- 2018
-
Ingår i: Acta Crystallographica Section A: Foundations and Advances. - 2053-2733. ; 74:1, s. 12-24
-
Tidskriftsartikel (refereegranskat)abstract
- Small-angle X-ray scattering tensor tomography, which allows reconstruction of the local three-dimensional reciprocal-space map within a three-dimensional sample as introduced by Liebi et al. [Nature (2015), 527, 349-352], is described in more detail with regard to the mathematical framework and the optimization algorithm. For the case of trabecular bone samples from vertebrae it is shown that the model of the three-dimensional reciprocal-space map using spherical harmonics can adequately describe the measured data. The method enables the determination of nanostructure orientation and degree of orientation as demonstrated previously in a single momentum transfer q range. This article presents a reconstruction of the complete reciprocal-space map for the case of bone over extended ranges of q. In addition, it is shown that uniform angular sampling and advanced regularization strategies help to reduce the amount of data required.The mathematical framework and reconstruction algorithm for small-angle scattering tensor tomography are introduced in detail, as well as strategies which help to reduce the amount of data and therewith the measurement time required. Experimental validation is provided for the application to trabecular bone.
|
|
| 16. |
- Lo Re, Giada, 1971, et al.
(författare)
-
Melt processable cellulose fibres engineered for replacing oil-based thermoplastics
- 2023
-
Ingår i: Chemical Engineering Journal. - : Elsevier BV. - 1385-8947 .- 1873-3212. ; 458
-
Tidskriftsartikel (refereegranskat)abstract
- If cellulosic materials are to replace materials derived from non-renewable resources, it is necessary to overcome intrinsic limitations such as fragility, permeability to gases, susceptibility to water vapour and poor three-dimensional shaping. Novel properties or the enhancement of existing properties are required to expand the applications of cellulosic materials and will create new market opportunities. Here we have overcome the well-known restrictions that impede melt-processing of high cellulose content composites. Cellulose fibres, partially derivatised to dialcohol cellulose, have been used to manufacture three-dimensional high-density materials by conventional melt processing techniques, with or without the addition of a thermoplastic polymer. This work demonstrates the use of melt processable chemically modified cellulose fibres in the preparation of a new generation of highly sustainable materials with tuneable properties that can be tailored for specific applications requiring complex three-dimensional parts.
|
|
| 17. |
- Mathavan, Neashan, et al.
(författare)
-
The compositional and nano-structural basis of fracture healing in healthy and osteoporotic bone
- 2018
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- Osteoporosis, a prevalent metabolic bone disorder, predisposes individuals to increased susceptibility to fractures. It is also, somewhat controversially, thought to delay or impair the regenerative response. Using high-resolution Fourier-transform infrared spectroscopy and small/wide-angle X-ray scattering we sought to answer the following questions: Does the molecular composition and the nano-structure in the newly regenerated bone differ between healthy and osteoporotic environments? And how do pharmacological treatments, such as bone morphogenetic protein 7 (BMP-7) alone or synergistically combined with zoledronate (ZA), alter callus composition and nano-structure in such environments? Cumulatively, on the basis of compositional and nano-structural characterizations of newly formed bone in an open-osteotomy rat model, the healing response in untreated healthy and ovariectomy-induced osteoporotic environments was fundamentally the same. However, the BMP-7 induced osteogenic response resulted in greater heterogeneity in the nano-structural crystal dimensions and this effect was more pronounced with osteoporosis. ZA mitigated the effects of the upregulated catabolism induced by both BMP-7 and an osteoporotic bone environment. The findings contribute to our understanding of how the repair processes in healthy and osteoporotic bone differ in both untreated and treated contexts and the data presented represents the most comprehensive study of fracture healing at the nanoscale undertaken to date.
|
|
| 18. |
- Nielsen, Leonard, 1992, et al.
(författare)
-
Small-angle scattering tensor tomography algorithm for robust reconstruction of complex textures
- 2023
-
Ingår i: Acta Crystallographica Section A: Foundations and Advances. - 2053-2733. ; 79:Pt 6, s. 515-526
-
Tidskriftsartikel (refereegranskat)abstract
- The development of small-angle scattering tensor tomography has enabled the study of anisotropic nanostructures in a volume-resolved manner. It is of great value to have reconstruction methods that can handle many different nanostructural symmetries. For such a method to be employed by researchers from a wide range of backgrounds, it is crucial that its reliance on prior knowledge about the system is minimized, and that it is robust under various conditions. Here, a method is presented that employs band-limited spherical functions to enable the reconstruction of reciprocal-space maps of a wide variety of nanostructures. This method has been thoroughly tested and compared with existing methods in its ability to retrieve known reciprocal-space maps, as well as its robustness to changes in initial conditions, using both simulations and experimental data. It has also been evaluated for its computational performance. The anchoring of this method in a framework of integral geometry and linear algebra highlights its possibilities and limitations.
|
|
| 19. |
- Rodriguez Palomo, Adrian, 1992, et al.
(författare)
-
Nanostructure and anisotropy of 3D printed lyotropic liquid crystals studied by scattering and birefringence imaging
- 2021
-
Ingår i: Additive Manufacturing. - : Elsevier BV. - 2214-8604. ; 47
-
Tidskriftsartikel (refereegranskat)abstract
- Extrusion-based 3D printing of hexagonal and lamellar lyotropic liquid crystals is a powerful technique to produce hierarchical materials with well-defined anisotropic structure. Tailoring the properties of 3D printed objects requires a precise control of the nanostructure; however, a sufficiently high degree of anisotropy is often not achieved. In this study, scanning small angle X-ray scattering was performed in situ at the exit of the needle during 3D printing. We study the induced anisotropy and nanostructure in hexagonal and lamellar lyotropic liquid crystals. Mapping of extruded filaments during printing revealed that narrower nozzle diameters (370 μm) resulted in less anisotropic structures with a wider distribution of orientation angles across the cross section, while larger nozzle diameters (550 μm) resulted in more anisotropic structures with an overall higher degree of orientation. The wall shear rate is higher for the narrower nozzle, which produces wall slip, resulting in a highly anisotropic shell, and a less aligned filament core. Further examination of the filaments revealed phase transitions due to solvent evaporation. The time scales were of 10 – 20 min of exposure to atmospheric conditions. Simultaneously, a loss in the macroscopic anisotropy of the hexagonal self-assembled structure was observed. These processes occur during and after extrusion-based 3D printing of liquid crystals and limit the fine control of the final structure. The variability of structures achieved for our different systems highlights the importance of structural characterization during and after extrusion to guarantee high anisotropy and well-defined structures.
|
|
| 20. |
- Rudolph-Schöpping, Gregor, et al.
(författare)
-
Towards multiscale X-ray tomographic imaging in membrane science : A perspective
- 2024
-
Ingår i: Journal of Membrane Science. - : Elsevier B.V.. - 0376-7388 .- 1873-3123. ; 690
-
Forskningsöversikt (refereegranskat)abstract
- Tomographic X-ray imaging techniques offer novel opportunities for studying membranes and membrane processes in 3D on a spatial resolution not seen before. Traditional 2D imaging techniques used to characterise membranes have limitations that can be overcome by tomographic X-ray imaging. Tomographic X-ray imaging can provide information in 2D/3D or 4D (3D plus time) on membranes, membrane modules, and membrane processes on a scale ranging from micro- to nanometre. They offer the possibility to uncover many fundamental issues related to membrane science, including the detection and monitoring of macroscopic biofilm formation, scaling, and cake build-up. High-resolution nanotomographic X-ray imaging enables even microscopic characterisations such as pore size distribution or pore network analysis. This Perspective paper introduces the tomographic X-ray imaging techniques with the most potential for membrane science: microtomography, nanotomography, holotomography, and ptychotomography, and presents their applications in the literature regarding the field of membrane science. Based on these findings and our experiences opportunities, challenges, and limitations of tomographic X-ray imaging techniques are discussed. It is concluded that in the near future tomographic X-ray imaging techniques will become increasingly common analytical techniques for membrane manufacturers, scientists, and users.
|
|
| 21. |
- Schaff, Florian, et al.
(författare)
-
Six-dimensional real and reciprocal space small-angle X-ray scattering tomography.
- 2015
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 527:7578, s. 353-353
-
Tidskriftsartikel (refereegranskat)abstract
- When used in combination with raster scanning, small-angle X-ray scattering (SAXS) has proven to be a valuable imaging technique of the nanoscale, for example of bone, teeth and brain matter. Although two-dimensional projection imaging has been used to characterize various materials successfully, its three-dimensional extension, SAXS computed tomography, poses substantial challenges, which have yet to be overcome. Previous work using SAXS computed tomography was unable to preserve oriented SAXS signals during reconstruction. Here we present a solution to this problem and obtain a complete SAXS computed tomography, which preserves oriented scattering information. By introducing virtual tomography axes, we take advantage of the two-dimensional SAXS information recorded on an area detector and use it to reconstruct the full three-dimensional scattering distribution in reciprocal space for each voxel of the three-dimensional object in real space. The presented method could be of interest for a combined six-dimensional real and reciprocal space characterization of mesoscopic materials with hierarchically structured features with length scales ranging from a few nanometres to a few millimetres--for example, biomaterials such as bone or teeth, or functional materials such as fuel-cell or battery components.
|
|
| 22. |
- Turunen, Mikael J., et al.
(författare)
-
Bone mineral crystal size and organization vary across mature rat bone cortex
- 2016
-
Ingår i: Journal of Structural Biology. - : Elsevier BV. - 1047-8477. ; 195:3, s. 337-344
-
Tidskriftsartikel (refereegranskat)abstract
- The macro- and micro-features of bone can be assessed by using imaging methods. However, nano- and molecular features require more detailed characterization, such as use of e.g., vibrational spectroscopy and X-ray scattering. Nano- and molecular features also affect the mechanical competence of bone tissue. The aim of the present study was to reveal the effects of mineralization and its alterations on the mineral crystal scale, by investigating the spatial variation of molecular composition and mineral crystal structure across the cross-section of femur diaphyses in young rats, and healthy and osteoporotic mature rats (N = 5). Fourier transform infrared spectroscopy and scanning small- and wide-angle X-ray scattering (SAXS/WAXS) techniques with high spatial resolution were used at identical locations over the whole cross-section. This allowed quantification of point-by-point information about the spatial distribution of mineral crystal volume. All measured parameters (crystal dimensions, degree of orientation and predominant orientation) varied across the cortex. Specifically, the crystal dimensions were lower in the central cortex than in the endosteal and periosteal regions. Mineral crystal orientation followed the cortical circumference in the periosteal and endosteal regions, but was less well-oriented in the central regions. Central cortex is formed rapidly during development through endochondral ossification. Since rats possess no osteonal remodeling, this bone remains (until old age). Significant linear correlations were observed between the dimensional and organizational parameters, e.g., between crystal length and degree of orientation (R2 = 0.83, p < 0.001). Application of SAXS/WAXS provides valuable information on bone nanostructure and its constituents, effects of diseases and, prospectively, mechanical competence.
|
|
| 23. |
- Turunen, Mikael J., et al.
(författare)
-
Effects of tissue fixation and dehydration on tendon collagen nanostructure
- 2017
-
Ingår i: Journal of Structural Biology. - : Elsevier BV. - 1047-8477. ; 199:3, s. 209-215
-
Tidskriftsartikel (refereegranskat)abstract
- Collagen is the most prominent protein in biological tissues. Tissue fixation is often required for preservation or sectioning of the tissue. This may affect collagen nanostructure and potentially provide incorrect information when analyzed after fixation. We aimed to unravel the effect of 1) ethanol and formalin fixation and 2) 24. h air-dehydration on the organization and structure of collagen fibers at the nano-scale using small and wide angle X-ray scattering. Samples were divided into 4 groups: ethanol fixed, formalin fixed, and two untreated sample groups. Samples were allowed to air-dehydrate in handmade Kapton pockets during the measurements (24. h) except for one untreated group. Ethanol fixation affected the collagen organization and nanostructure substantially and during 24. h of dehydration dramatic changes were evident. Formalin fixation had minor effects on the collagen organization but after 12. h of air-dehydration the spatial variation increased substantially, not evident in the untreated samples. Generally, collagen shrinkage and loss of alignment was evident in all samples during 24. h of dehydration but the changes were subtle in all groups except the ethanol fixed samples. This study shows that tissue fixation needs to be chosen carefully in order to preserve the features of interest in the tissue.
|
|
| 24. |
- Villanueva-Perez, Pablo, et al.
(författare)
-
Signal-to-noise criterion for free-propagation imaging techniques at free-electron lasers and synchrotrons
- 2016
-
Ingår i: Optics Express. - 1094-4087. ; 24:4, s. 3189-3201
-
Tidskriftsartikel (refereegranskat)abstract
- We propose a signal-to-noise criterion which predicts whether a feature of a given size and scattering strength, placed inside a larger object, can be retrieved with two common X-ray imaging techniques: coherent diffraction imaging and projection microscopy. This criterion, based on how efficiently these techniques detect the scattered photons and validated through simulations, shows in general that projection microscopy can resolve smaller phase differences and features than coherent diffraction imaging. Our criterion can be used to design optimized imaging experiments and perform feasibility studies for sensitive biological materials in free-electron lasers, where the number of photons per pulse is limited, or in synchrotron experiments, for both techniques.
|
|
| 25. |
- Östergren, Ida, 1991, et al.
(författare)
-
Highly Permeable Fluorinated Polymer Nanocomposites for Plasmonic Hydrogen Sensing
- 2021
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 13:18, s. 21724-21732
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogen (H2) sensors that can be produced en masse with cost-effective manufacturing tools are critical for enabling safety in the emerging hydrogen economy. The use of melt-processed nanocomposites in this context would allow the combination of the advantages of plasmonic hydrogen detection with polymer technology; an approach which is held back by the slow diffusion of H2 through the polymer matrix. Here, we show that the use of an amorphous fluorinated polymer, compounded with colloidal Pd nanoparticles prepared by highly scalable continuous flow synthesis, results in nanocomposites that display a high H2 diffusion coefficient in the order of 10-5 cm2 s-1. As a result, plasmonic optical hydrogen detection with melt-pressed fluorinated polymer nanocomposites is no longer limited by the diffusion of the H2 analyte to the Pd nanoparticle transducer elements, despite a thickness of up to 100 μm, thereby enabling response times as short as 2.5 s at 100 mbar (10 vol. %) H2. Evidently, plasmonic sensors with a fast response time can be fabricated with thick, melt-processed nanocomposites, which paves the way for a new generation of robust H2 sensors.
|
|
