SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Gustavsson Jakob) "

Sökning: WFRF:(Gustavsson Jakob)

  • Resultat 1-50 av 76
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Gustavsson, Jakob, et al. (författare)
  • Utrikespolitiskt beslutsfattande
  • 2006
  • Ingår i: Internationella relationer. - 9144045468 ; , s. 255-274
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)
  •  
2.
  • Kalm, Sara, et al. (författare)
  • Internationell migration
  • 2021
  • Ingår i: Internationella relationer. - 9789144139463 ; , s. 451-470
  • Bokkapitel (populärvet., debatt m.m.)
  •  
3.
  • Aggestam, Karin, et al. (författare)
  • Förhandling och diplomati
  • 2006
  • Ingår i: Internationell politik. - 9144045468
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)
  •  
4.
  • Ahrens, Lutz, et al. (författare)
  • Screening av perfluoralkylerade ämnen och flamskyddsmedel i svenska vattendrag
  • 2014
  • Rapport (övrigt vetenskapligt/konstnärligt)abstract
    • Syftet med projektet var att studera förekomst av perfluoralkylerade ämnen (PFASs) samt relativt nya flamskyddsmedel (FRs) i svenska vattendrag. Vi provtog på 44 platser (totalt 41 vattendrag) och bestämde innehållet av PFASs (alla platser) och FRs (25 platser). Av de 12 utvalda FRs, kunde 3 kvantifieras. TCIPP var det klart dominerade ämnet med en halt på upp till 3900 ng L-1 (Fyrisån). 2,4,6-TBP uppvisade högre halter i åar i södra Sverige. Vattendragen med de högsta av σFRs var Fyrisån och Norrström. Den totala belastningen på östersjön av σFRs uppskattades till 38 kg dag-1, där ångermanlandsälven och Norrström stod för de största bidragen. Det ska noteras att i dessa belastningssiffror ingår inte äldre FRs med omfattande historisk användning, t.ex. PBDE. Totalt 13 av 25 de analyserade PFASs kunde kvantifieras. Medelvärdet av σPFASs i alla vattendrag var 9,5 ng L-1, och de högsta medelhalterna uppmättes för PFBS och PFHxS (~2 ng L-1). Det sammanlagda utflödet av σPFASs uppgick till 3,2 kg dag-1. PFOS överskred miljökvalitetsnormen på 0,65 ng L-1 (årligt medelvärde; AA-EQS; 2013/39/EU) på 12 av 44 platser.Den här fältstudien baseras på en provtagningskampanj med ögonblicksprovtagning, och därför ska alla rapporterade värden tolkas med försiktighet. Verifikation av höga resultat och mer detaljerade studier på platser med förhöjda värden rekommenderas. Studien pekar också på att uppströmsmätningar är nödvändiga för att finna viktiga föroreningskällor.
  •  
5.
  • Ahrens, Lutz, et al. (författare)
  • Screening of perfluoroalkyl substances and organic flame retardants in Swedish Rivers : Screening av perfluoralkylerade ämnen och flamskyddsmedel i svenska vattendrag
  • 2013
  • Rapport (övrigt vetenskapligt/konstnärligt)abstract
    • The occurrence and effects of ubiquitously present persistent organic pollutants (POPs) in the environment is one of the challenges the society is facing today. Two categories of chemicals that have gained increased public attention during the last decades are organic flame retardants (FRs) and perfluoroalkyl substances (PFASs). Many representatives from these compound groups have bioaccumulative, persistent and toxic properties. This has led to a ban of some of these compounds based on international agreements.FRs and PFASs end up in surface waters and sometimes also in ground water due to their widespread distribution, disinclination of getting removed at wastewater treatment plants (WWTPs), and persistence. However, the knowledge of the occurrence, fate, and effect in the environment of FRs and PFASs is still in great need of research, especially for recently introduced compounds (such as novel FRs). The objective of this project was to provide a snapshot of the current pollution situation of PFASs and selected novel FRs in Swedish surface waters. We sampled at 44 sites (representing 41 rivers and streams) along the whole coastline of Sweden and analysed their content of PFASs (all sites) and FRs (25 sites representing 23 rivers).Among the 12 target FRs, 3 could be quantified (2,4,6-TBP, TCIPP, and TPHP). TCIPP was the predominant compound with a level up to 3 900 ng L-1. The 2,4,6-TBP showed higher levels in southern rivers. The river with highest levels of ΣFRs was Fyrisån, and the total riverine input of the targeted FRs into the Baltic Sea was estimated to 38 kg day-1 with Ångermanlandsälven and Norrström as major contributors. It should be noted that these values only include the targeted, relatively novel FRs, while historically more important FRs such as the polybrominated diphenyl ethers (PBDEs), are not included.In total 13 PFASs were detected (PFBA, PFHxA, PFHpA, PFOA, PFNA, PFDA, PFUnDA, PFDoDA, PFTeDA, FOSA, PFBS, PFHxS, PFOS) among the 25 target compounds. The mean ΣPFAS level of all sampled rivers was 9.5 ng L-1 and the median 4.2 ng L-1, and the highest mean values were found for PFBS and PFHxS (~2 ng L-1 for each compound). Streams in the north (e.g. Alterälven, Öre älv, Gide älv, Lögde älv and Ljungan) showed generally higher fractions of the longer chained perfluoroalkyl carboxylic acids (PFCAs; i.e. PFNA, PFDA, PFUnDA, PFDoDA, PFTeDA) whereas in the south the fractions of PFHpA and PFOA were higher. The total riverine input of all PFASs into recipient seas was estimated to 3.2 kg day-1 (1150 kg yr-1).PFOS exceeded the annual average Environmental Quality Standard (AA-EQS; 2013/39/EU) of 0.65 ng L-1 at 12 of 44 sampling sites, which are located in all parts of Sweden (Ume älv at Gubböle, Ångermanälven, Delångersån, Fyrisån, Norrström, Nyköpingsån, Emån, Lyckebyån, Rönneån, Nissan, Viskan and Göta älv at Alelyckan).As this study was a one-time grab sampling campaign for screening purposes, all values should be interpreted with care. A screening study like the current may, however, reveal hot spots. Verification and more detailed studies over a longer time period are recommended for sites with elevated levels. Our study also suggests that upstream monitoring is necessary to reveal important pollution sources. 
  •  
6.
  • Anving, Terese, et al. (författare)
  • Informationskompetens – generella färdigheter för fördjupat lärande
  • 2012
  • Ingår i: Proceedings, Lunds universitets utvecklingskonferens 11. - 9789197797467 ; , s. 107-116
  • Konferensbidrag (refereegranskat)abstract
    • Förmågan att effektivt utnyttja och kritiskt förhålla sig till olika informationsresurser – ”information literacy” eller informationskompetens – är en central färdighet i det moderna samhället. Det utgör också en allt viktigare del av lärandet i högre utbildning. Syftet med detta paper är tvåfaldigt: 1) att problematisera relationen mellan informationskompetens som en generell färdighet och mer specifika ämnesorienterade kunskaper och färdigheter; 2) ge exempel på och utveckla redskap för lärare att på ett ämnesmässigt integrerat sätt arbeta med, utveckla och examinera studenternas informationskompetens. Ett huvudspår i framställningen är att synliggöra hur träningen i informationskompetens kan stimulera och hjälpa studenterna till fördjupade ämneskunskaper.
  •  
7.
  • Badersten, Björn, et al. (författare)
  • Introduksjon til statsvitenskap. Om undring over politikk.
  • 2012
  • Bok (övrigt vetenskapligt/konstnärligt)abstract
    • Abstract in Norwegian Hva mener vi når vi sier at noe er rettferdig eller likt fordelt? Statsvitere søker svar på slike store spørsmål – om krig og fred, rett og urett, miljø og global ressursfordeling. Men statsvitere interesserer seg også for det mer lokale og hverdagslige. Hvorfor stemte folk som de gjorde i forrige lokalvalg? Hvorfor er det av og til så vanskelig å gjennomføre politiske beslutninger i kommuner og fylker? Hvem har egentlig makt over skolen? Statsvitenskap kan beskrives som det vitenskapelige studiet av politikk og i denne boken gis en introduksjon til nettopp dette. Boken egner seg godt for bachelor studenter i statsvitenskap som ønsker en introduksjon til faget. Forfatterne har lagt vekt på å presentere stoffet på en enkel, oversiktlig og engasjerende måte.
  •  
8.
  •  
9.
  • Bengtsson, Rikard, et al. (författare)
  • Internationell politisk ekonomi
  • 2014
  • Ingår i: Internationella relationer. - 9789144102801
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)
  •  
10.
  • Bengtsson, Rikard, et al. (författare)
  • Internationell politisk ekonomi
  • 2021. - 4
  • Ingår i: Internationella relationer. - 9789144139463 ; , s. 336-356
  • Bokkapitel (refereegranskat)
  •  
11.
  • Björkdahl, Annika, et al. (författare)
  • Förenta Nationerna
  • 2006
  • Ingår i: Internationella Relationer.
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)
  •  
12.
  • Bäckstrand, Karin, et al. (författare)
  • Global miljöpolitik
  • 2006
  • Ingår i: Internationella relationer.
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)
  •  
13.
  • de Ståhl, Teresita Diaz, et al. (författare)
  • The Swedish childhood tumor biobank : systematic collection and molecular characterization of all pediatric CNS and other solid tumors in Sweden
  • 2023
  • Ingår i: Journal of Translational Medicine. - : BioMed Central (BMC). - 1479-5876. ; 21
  • Tidskriftsartikel (refereegranskat)abstract
    • The Swedish Childhood Tumor Biobank (BTB) is a nonprofit national infrastructure for collecting tissue samples and genomic data from pediatric patients diagnosed with central nervous system (CNS) and other solid tumors. The BTB is built on a multidisciplinary network established to provide the scientific community with standardized biospecimens and genomic data, thereby improving knowledge of the biology, treatment and outcome of childhood tumors. As of 2022, over 1100 fresh-frozen tumor samples are available for researchers. We present the workflow of the BTB from sample collection and processing to the generation of genomic data and services offered. To determine the research and clinical utility of the data, we performed bioinformatics analyses on next-generation sequencing (NGS) data obtained from a subset of 82 brain tumors and patient blood-derived DNA combined with methylation profiling to enhance the diagnostic accuracy and identified germline and somatic alterations with potential biological or clinical significance. The BTB procedures for collection, processing, sequencing, and bioinformatics deliver high-quality data. We observed that the findings could impact patient management by confirming or clarifying the diagnosis in 79 of the 82 tumors and detecting known or likely driver mutations in 68 of 79 patients. In addition to revealing known mutations in a broad spectrum of genes implicated in pediatric cancer, we discovered numerous alterations that may represent novel driver events and specific tumor entities. In summary, these examples reveal the power of NGS to identify a wide number of actionable gene alterations. Making the power of NGS available in healthcare is a challenging task requiring the integration of the work of clinical specialists and cancer biologists; this approach requires a dedicated infrastructure, as exemplified here by the BTB.
  •  
14.
  •  
15.
  • Dubocq, Florian, 1994-, et al. (författare)
  • Comprehensive chemical characterization of indoor dust by target, suspect screening and nontarget analysis using LC-HRMS and GC-HRMS
  • 2021
  • Ingår i: Environmental Pollution. - : Springer. - 0269-7491 .- 1873-6424. ; 276
  • Tidskriftsartikel (refereegranskat)abstract
    • Since humans spend more than 90% of their time in indoor environments, indoor exposure can be an important non-dietary pathway to hazardous organic contaminants. It is thus important to characterize the chemical composition of indoor dust to assess the total contaminant exposure and estimate human health risks. The aim of this investigation was to perform a comprehensive chemical characterization of indoor dust. First, the robustness of an adopted extraction method using ultrasonication was evaluated for 85 target compounds. Thereafter, a workflow combining target analysis, suspect screening analysis (SSA) and nontarget analysis (NTA) was applied to dust samples from different indoor environments. Chemical analysis was performed using both gas chromatography and liquid chromatography coupled with high resolution mass spectrometry. Although suppressing matrix effects were prominent, target analysis enabled the quantification of organophosphate/brominated flame retardants (OPFRs/BFRs), liquid crystal monomers (LCMs), toluene diisocyanate, bisphenols, pesticides and tributyl citrate. The SSA confirmed the presence of OPFRs but also enabled the detection of polyethylene glycols (PEGs) and phthalates/parabens. The combination of hierarchical cluster analysis and scaled mass defect plots in the NTA workflow confirmed the presence of the above mentioned compounds, as well as detect other contaminants such as tetrabromobisphenol A, triclocarban, diclofenac and 3,5,6-trichloro-2-pyridinol, which were further confirmed using pure standards.
  •  
16.
  •  
17.
  • Ejhed, Helene, et al. (författare)
  • Beräkning av kväve-och fosforbelastning på vatten och hav för uppföljning av miljökvalitetsmålet "Ingen övergödning"
  • 2011
  • Rapport (övrigt vetenskapligt/konstnärligt)abstract
    • På uppdrag av Naturvårdverket har SMED genomfört beräkningar av kväve- och fosforbelastningar på vatten och hav i Sverige för år 2009. Beräkningarna har ge-nomförts med PLC5-metodik och underlag för att möjliggöra jämförelse med tidi-gare beräknad belastning år 1995, 2000 och 2006. Inom uppdraget har underlag och sammanställningar tagits fram till den nationella miljömålsuppföljningen av målet "Ingen övergödning" och uppföljning av utsläppsreduktion i förhållande till de Svenska betingen inom Baltic Sea Action Plan.Tidigare belastningsberäkningar (år 1995, 2000 och 2006) genomfördes baserat på långtidsmedelvärde av avrinning för att korttidsvariationer i klimatet inte skulle överskugga förändringar i källornas storlek. Beräkningarna genomfördes också av nettobelastningen på havet för kväve och fosfor, d.v.s. hur stor del som når havet efter avskiljning (retention) som sker vid transport genom mark, sjöar och vatten-drag. I detta projekt har samma metodik utnyttjats; samma avrinning och retent-ionsandel har använts för att resultaten från samtliga år ska kunna jämföras med varandra.Den totala bruttobelastningen av kväve från samtliga källor är 155 700 ton kväve år 2009 (utan bidrag från hygge), vilket motsvarar en minskning med totalt 11 % från år 1995. Den totala diffusa bruttobelastningen av kväve beräknades för år 2009 till 129 200 ton, d.v.s. ca 6 % minskning från 1995 års bruttobelastning av kväve från diffusa källor. Bruttobelastningen av kväve från jordbruksmark minskade med ca 10 % från 1995 års nivå och med ca 2 % från år 2006. Den minskade totala arean jordbruksmark står för i stort sett hela minskningen av belastningen från jord-bruksmark från år 2006 till 2009. Åtgärder i form av skyddszoner och fånggrödor har minskat under perioden och bidrar därmed inte till den lägre belastningen. Bruttobelastningen av kväve från reningsverk och industrier har minskat under perioden 1995 till 2009 med totalt 31 % respektive 34 %. Den största förändringen skedde mellan år 1995 och 2000 då kväverening infördes som reningssteg i många reningsverk och industrier. Från år 2000 till år 2009 har bruttobelastningen fortsatt att minska med 8 och 17 % från reningsverk respektive industrier. Belastningen från enskilda avlopp har däremot ökat något med 200 ton kväve sedan år 1995 på grund av ökat antal fastigheter med enskilda avlopp.Total nettobelastning av kväve år 2009 för hela Sverige var 115700 ton, vilket motsvarar en minskning från 1995 med 11 %. Regeringens havsmiljöplan (Rege-ringens skrivelse 2009/10:213 ) riktar in miljöarbetet bland annat för att klara ut-släppsreduktioner enligt Baltic Sea Action Plan (BSAP). Minskningen i nettobe-lastning av kväve från år 2000 till 2009 utgör endast 4700 ton kväve (Egentliga Östersjön, Öresund och Kattegatt) och mycket återstår om målet, 20780 ton kväve, ska uppnås.Den antropogena belastningen efter retention (netto) var 59000 ton kväve år 2009 för hela Sverige, totalt inklusive hyggen. Punktutsläpp av kväve år 2009 var 21800 ton och står för en betydande del av minskningen av den antropogena nettobelast-ningen med 30 % från 1995. De antropogena diffusa källorna har minskat med 12 % (netto) från år 1995 till 2009. Delmålet för kväve inom miljökvalitetsmålet "Ing-en övergödning" anger att senast år 2010 ska de svenska vattenburna utsläppen av kväveföreningar från mänsklig verksamhet till haven söder om Ålands hav ha minskat med minst 30 % från 1995 års nivå. Den totala antropogena nettobelast-ningen av kväve till haven söder om Ålands hav har beräknats till 42400 ton (utan hyggen för jämförelse med år 1995). Det innebär en minskning med ca 25 % från år 1995 till år 2009, vilket betyder att delmålet för kväve inte uppnåtts.Den totala bruttobelastningen av fosfor (diffusa källor och punktkällor) var sam-manlagt 4730 ton år 2009 (4750 ton med bidrag från hyggen inkluderat). Det mots-varar en minskning med 10 % sedan år 1995.Den totala diffusa bruttobelastningen av fosfor minskar med ca 4 % från år 1995. Bruttobelastningen av fosfor från jord-bruksmark minskade med ca 7 % från 1995 års nivå och med ca 2 % från år 2006. Orsaken till förändringen mellan 1995 och 2006 är införsel av åtgärder för minskat växtnäringsläckage, men från år 2006 till 2009 är det minskad total areal jord-bruksmark som står för i stort sett hela förändringen. Bruttobelastning av fosfor från punktkällor år 2009 beräknades till 880 ton, vilket motsvarar en minskning med ca 17 % från år 2006 och 30 % sedan år 1995. Kommunala avloppsrenings-verk står för den största förändringen, motsvarande ca 45 % lägre belastning år 2009 jämfört med år 1995. Den viktigaste orsaken till minskningen är att ny re-ningsteknik införts framför allt i de största reningsverken. Industrier står också för en betydande minskning, motsvarande 33 % från år 1995 till år 2009. De totala förändringarna i utsläpp innebär att enskilda avlopp, KARV respektive industrier står för ungefär lika stor belastning år 2009.Den antropogena bruttobelastningen av fosfor var sammanlagt 1930 ton år 2009, vilket motsvarar en minskning med ca 7 % från år 2006. Delmålet för fosfor inom miljökvalitetsmålet "Ingen övergödning" anger att till år 2010 ska de svenska vat-tenburna utsläppen av fosforföreningar från mänsklig verksamhet till sjöar, vatten-drag och kustvatten ha minskat med minst 20 % från 1995 års nivå. Den av mänsk-lig verksamhet orsakade vattenburna belastningen av fosfor har minskat med ca 18 % från år 1995 till år 2009 och miljömålet har därmed inte uppnåtts. Enligt dessa beräkningar återstår det att minska ca 50 ton fosfor för att miljömålet ska uppnås.Total nettobelastning av fosfor år 2009 för hela Sverige är 3360 ton, vilket motsva-rar en minskning från 1995 med 11 %. Den antropogena nettobelastningen av fos-for på havet har minskat med ca 22 % (380 ton) från år 1995 för hela Sverige. En-ligt Baltic Sea Action Plan (BSAP) är målet att minska belastningen av fosfor med 290 ton från land till Egentliga Östersjön. Minskningen i nettobelastning av fosfor från år 2000 till 2009 till Egentliga östersjön utgör endast 50 ton fosfor och mycket återstår om målet ska uppnås.
  •  
18.
  • Ejhed, Helene, et al. (författare)
  • Nettobelastning av metaller i Dalälven
  • 2012
  • Rapport (övrigt vetenskapligt/konstnärligt)abstract
    • Belastning och utsläpp av metaller till vatten rapporteras inom ett flertal internat-ionella rapporteringar; årligen till HELCOM och OSPAR samt vart tredje år till EEA WISE SoE Emissions. Cd, Pb, Hg och Ni ingår i listan av prioriterade ämnen enligt dotterdirektivet (2008/105/EG) till EUs ramdirektiv för vatten (2000/60/EG). För att analysera utsläpp och transport av metaller till inlandsvatten och havet måste källorna, men även avskiljning (retentionen) från källan till havet beräknas. En av de viktigaste indataparametrarna för att beräkna retention av metallerna är partikulär andel av metallerna i vatten.Syftet med detta projekt var att beräkna retention av metaller under transport från källan till havet i ett helt huvudavrinningsområde, Dalälven. Syftet var vidare att ta fram bättre regressionsekvationer som kan skatta andel partikulär metall med ytter-ligare styrande data utöver de kemiska parametrar som användes i tidigare studier och som kan ta hänsyn till förutsättningarna i Dalälvens avrinningsområde. Detta arbete bygger vidare på en tidigare testad retentionsmodell och framtagna regress-ionsekvationer för partikulär andel metaller (Lindström och Håkanson 2001, Ejhed m.fl.2011) och bruttobelastning (utsläpp vid källan) av metaller beräknat för avrin-ningsområden i hela Sverige (Ejhed m.fl., 2010). De metaller som hanterades i projektet var de prioriterade ämnena Cd, Hg, Pb och Ni, samt Cu och Zn som prio-riterades av Naturvårdsverket.För att förbättra regressionsekvationer för beräkning av andel partikulära metaller och anpassa till Dalälvens avrinningsområde utökades den befintliga miljööver-vakningen i Dalälven genom detta projekt med provtagning och analys av metaller i ofiltrerade prover både vid de redan befintliga provplatserna och vid ytterligare fem provplatser, i samråd med länsstyrelsen i Dalarna. Både flödesdata, andra ke-midata och markanvändning studerades för att bestämma vilka faktorer som styr andel metaller i partikulär form. Ekvationer togs fram för beräkning av andel me-taller i löst form för alla ovan nämnda metaller. Tillsammans med totalhalterna kan andel metaller i partikulär form skattas för alla metallerna i alla områden.Av analysen framgår att det finns stora skillnader för partikulär respektive löst andel för de olika metallerna och de olika områdena. Den största källan till variat-ion är dock pH. I sura vatten så som Lill-Fämtan är nästan alla metaller i löst form medan i mer alkaliska områden så som Dalälven Älvkarleby finns mycket större andel metaller i partikulär form. Vatten med större tillrinningsområden har oftast högre pH värden eftersom bidragen av välbuffrat grundvatten är större. Detta gäller också för sjöar med längre uppehållstider. Områden med stor andel åkermark och låg terräng uppvisar också högre andel metaller i partikulär form (Holen). Detta härrör förmodligen av mobilisering av större andel partiklar än i de andra vatten-dragen. Regressionerna som framtogs i denna rapport verka vara någorlunda uni-versella för alla studerade områden och påverkas inte av markanvändning eller om områdena är påverkade. Andel partikulära metaller varierar från 12% för Cu till 92% för Hg.En förenklad retentionsmodell utvecklades baserat på sjöarea, medeldjup, medel-tillrinning, partikulär andel metaller och fallhastighet för metallerna i Dalälvens avrinningsområde. Nettobelastningen och transport mellan delavrinningsområdena i Dalälven ner till havet beräknades genom att använda uppsättningen av HYPE-modellen baserat på Svenskt vattenarkiv 2010_2. Retentionsmodellens tillförlitlig-het testades genom att jämföra beräknad retention med motsvarande uppmätta värden i tre sjöar i Dalälvens avrinningsområde. Det konstaterades att den förenk-lade modellansatsen tämligen väl beskriver retentionen för de undersökta metaller-na. Den största avvikelsen noteras för Cu där den genomsnittliga retentionen un-derskattas med 16 procentenheter medan det för Zn och Pb skiljer 8 procentenheter mellan empiriskt och modellerat värde. Den sammanlagda retentionen för metal-lerna till havet varierar från 35% för Cu till 78% för Hg. Den inbördes skillnaden mellan olika metaller beror av deras varierande partikelbundna förekomst.Detta projekt har tagit fram en generell modell som med fördel skulle kunna appli-ceras och testas på andra avrinningsområden. Modellen kräver inte särskilt mycket indata, vilket kan anses vara en fördel då mycket indata sällan finns att tillgå i hu-vuddelen av Sveriges avrinningsområden. Modellen ger beräknad nettobelastning av källor till metaller och transport genom avrinningsområden, vilket är aktuellt och efterfrågat för påverkansanalys enligt ramdirektivet för vatten.Modellresultaten visar att beräkningar av retention och nettobelastning är ett nyttigt verktyg för att verifiera resultat av bruttobelastning och redovisning av källor till belastning. Det blev tydligt att det saknas källor i beräkningen av bruttobelastning-en i Dalälvens avrinningsområde. Det troliga är att läckage från gamla gruvdepo-nier saknas, men även att lokala variationer med högre läckage från diffusa källor kan orsaka skillnaden i uppmätt flodtransport och beräknad belastning.
  •  
19.
  • Gustavsson, Catharina, et al. (författare)
  • Predictive factors for disability outcome at 20 weeks and 2 years following a pain self-management group intervention in patients with persistent neck pain in primary health care
  • Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
    • Study design. An explorative, longitudinal, prospective study, with measurement at baseline, 20 weeks and 2 years. Objective. To explore plausible predictors associated with short-term (20 weeks) and long-term (2 years) treatment success in terms of pain-related disability for patients with persistent tension-type neck pain following a multi-component pain and stress self-management group intervention (PASS). Summary of Background Data. In previously reported short-term and long-term follow-up, PASS had better effect on pain control, pain-related self-efficacy, disability and catastrophizing than a control treatment; individually administered physical therapy (IAPT). Identification of patients who are likely to benefit from particular interventions is required. Methods. Data collected from 77 participants assigned to PASS in a randomized controlled trial were explored in order to identify plausible predictors of favorable outcome regarding pain-related disability as measured by the Neck Disability Index (NDI), by use of Pearson correlation analysis, factor analysis (FA) and partial least squares (PLS) and ordinary least squares (OLS) regression analyses. Data from self-assessment questionnaires completed by the participants before intervention, post-treatment (20 weeks) and at 2 years after the intervention, were used. The questionnaire comprised: the Self-Efficacy Scale (SES), the NDI, the Coping Strategies Questionnaire(CSQ), the Hospital Anxiety and Depression Scale (HADS) and questions regarding neck pain and analgesics. Results. Multivariate PLS regression analysis showed that baseline scores in NDI, SES and pain intensity explained only 31% of the variance in disability (NDI) immediately post-treatment (20-week follow-up). PLS regression analysis showed that post-treatment scores in NDI, SES and pain intensity explained 68% of the variance in disability (NDI) at 2 years. Univariate OLS linear regression analyses indicated that each variable contributed significantly to the latter PLS regression model (NDI p<0.001, SES p<0.001, pain intensity p<0.001). Conclusions. Treatment gains, as measured by immediate post-treatment scores at 20-week follow-up, in disability, self-efficacy and pain intensity were associated with long-term outcome in pain-related disability two years post-treatment, in patients with persistent neck pain participating in a self-management group intervention in PHC. Pre-treatment characteristics explained only a small proportion of variance in disability post-treatment. Thus, the intervention appears to be feasible for the majority of persons seeking PHC due to persistent tension-type neck pain.
  •  
20.
  • Gustavsson, Catharina, et al. (författare)
  • Predictive factors for disability outcome at twenty weeks AND two years following a pain self-management group intervention in patients with persistent neck pain in primary health care
  • 2013
  • Ingår i: Journal of Rehabilitation Medicine. - : Medical Journals Sweden AB. - 1650-1977 .- 1651-2081. ; 45:2, s. 170-176
  • Tidskriftsartikel (refereegranskat)abstract
    • Objective: To explore possible predictors associated with short-term (post-treatment) and long-term (2 years) treatment success in terms of pain-related disability for patients with persistent neck pain following a pain and stress self-management intervention (PASS). Methods: Data from 77 participants assigned to PASS in a randomized controlled trial were explored to identify possible predictors of favourable outcome regarding pain-related disability as measured by the Neck Disability Index (NDI), by use of Pearson correlation analysis, partial least squares (PLS) and ordinary least squares (OLS) regression analyses. Data from self-assessment questionnaires completed by the participants before, post-treatment (i.e. 20 weeks after inclusion) and 2 years after inclusion in the study, were used. Results: Multivariate PLS regression analysis showed that baseline scores in NDI, the Self-Efficacy Scale. (SES) and pain intensity explained 31% of the variance in disability (NDI) post-treatment. Multivariate PLS regression analysis showed that post-treatment scores in NDI, SES and pain intensity explained 68% of the variance in disability (NDI) at 2 years. Conclusion: Treatment gains, as measured by post-treatment scores at 20-week follow-up, in disability, self-efficacy and pain intensity were associated with long-term outcome in pain-related disability at 2 years, in patients with persistent neck pain participating in a self-management group intervention in primary health care.
  •  
21.
  • Gustavsson, Håkan, 1977-, et al. (författare)
  • A Comparative Case Study of Architecting Practices in the Embedded Software Industry
  • 2011
  • Ingår i: Proceedings of 18th IEEE International Conference and Workshops on Engineering of Computer-Based Systems. - 9780769543796 ; , s. 226-231
  • Konferensbidrag (refereegranskat)abstract
    • The goal of this study is to improve the understanding of how architecting is performed within the field of software-intensive systems. Architects at six different internationally well-known companies have been interviewed to understand their way of working. This paper presents the practices that are found most successful. The context of the different companies as well as the architecting practices are compared and analyzed. Many of the architecting practices found in the study can be explained by the context of the different companies. The study shows that architects at all companies mention a general lack of understanding of software-intensive systems within industries that used to be mechanical. The architects' view of their work is very similar independently of where they work. Also the way architecting is performed is very similar, but surprisingly only one company has a defined process for architecting.
  •  
22.
  •  
23.
  •  
24.
  • Gustavsson, Håkan, et al. (författare)
  • Architecting Complex Embedded Systems : An Industrial Case Study
  • 2011
  • Ingår i: 2011 IEEE International Systems Conference, SysCon 2011 - Proceedings. - : IEEE. - 9781424494927 ; , s. 472-478
  • Konferensbidrag (refereegranskat)abstract
    • This paper studies the current state of architecting practices in three different industrial segments which are characterized by being software-intensive. The context of the six different companies as well as the architecting practices are compared and analyzed. The methods used to solve the tasks within the architecting process are mapped to the context where it has been used in industry. An analysis of the case study indicates how different methods are more suitable in different environments. Many of the successful practices found in the study can be explained by external factors related to the context of the different companies. Others relate to the internal structure of the organization, including its maturity which is measured by assessment through an adaption of the Capability Maturity Model Integration (CMMI).
  •  
25.
  •  
26.
  • Gustavsson, Håkan, et al. (författare)
  • Coping with Variability in Automotive Product line Architectures Using Real Options
  • 2007
  • Konferensbidrag (refereegranskat)abstract
    • The automotive customers demand new functionality with every new product release and the time-to-market isconstantly shortened. The automotive embedded systems are characterized by being mechatronic system which addscomplexity. The systems are often resource constrained and trade-offs between the system behavior and the resources required is of great importance. The decisions are usually based on many factors that pull in different directions such as maintenance, portability, usability etc. The complex system and the many uncertain factors create a need for support in the design process. In this paper the use of Real Options is evaluated on a hypothetic but realistic case taken from the automotive industry. The case show how real option valuation provides additional guidance when making system design decisions. Real Options provide the opportunity to analyze the cost of designing for future growth of an platform, based on the estimated value of the future functionality. The value of a flexible design can thereby be quantified making the trade-off between short and long term solution more accurate.
  •  
27.
  • Gustavsson, Håkan, 1977- (författare)
  • ECONOMICAL VALUATION OF ARCHITECTURAL DECISIONS WITHIN AUTOMOTIVE ELECTRONICS
  • 2008
  • Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Today most innovations made within the automotive domain are driven by electronics. The automotive customers demand new functionality with every new product release and the time-to-market is constantly shortened. Automotive embedded systems are often resource constrained and trade-offs between the system behavior and the resources required is of great importance. The cost sensitive automotive industry has to optimize the use of the system's limited resources, but in the meantime also be flexible. The system needs to support a large number of vehicle configurations over many years of production. The design decisions are usually based on many factors that pull in different directions such as maintenance, portability, usability etc. The growing complexity of the product and the many uncertain factors create a need for support in the design process. To better understand this problem decision methods used within an R&D department of an international vehicle manufacturer has been investigated through interviews and surveys. The survey reveals that a majority of the respondents use unstructured methods for resolving decision issues. When respondents were asked about their preferences there was an expressed need for more structured methods. In this research several existing methods have been surveyed and the methods most relevant to this issue are further described in this thesis. The main contribution of this thesis is an evaluation method using Real Options. The method provides the opportunity to analyze the cost of designing for flexibility to cope with a future growth of the product, based on the estimated value of the future functionality. To improve the usability an evaluation process is defined to aid engineers. This process provides a way of valuing system designs and enables the engineer to think about the future in a systematic manor. To analyze the resource usage within an embedded system a method is proposed on how to evaluate the resource efficiency of functions implemented within an automotive embedded system. The challenge of this work has been to develop methods that are found helpful to the industry and are easy enough to use so that designers are willing to try them again
  •  
28.
  • Gustavsson, Håkan, 1977-, et al. (författare)
  • Evaluating Flexibility in Embedded Automotive Product Lines Using Real Options
  • 2008
  • Ingår i: Proceedings - 12th International Software Product Line Conference, SPLC 2008. - 9780769533032 ; , s. 235-242
  • Konferensbidrag (refereegranskat)abstract
    • Embedded automotive architectures and software need to support a large number of vehicle product lines over many years of production. This leads to a complexity and many uncertain factors when developing such systems and a need for support in the design process. An evaluation method using Real Options provides the opportunity to analyze the cost of designing for flexibility to cope with a future growth of a product line, based on the estimated value of the future functionality. In this paper Real Options is applied on a case within the automotive industry. To improve the usability an evaluation process is defined to aid engineers. This process provides a way of valuing system designs and enables the engineer to think about the future in a systematic manor. The value of a flexible design can thereby be quantified and the proposed process shows how it can be accepted by practitioners.
  •  
29.
  • Gustavsson, Håkan, et al. (författare)
  • Evaluation of Design Options in Embedded Automotive Product Lines
  • 2010
  • Ingår i: Applied Software Product Line Engineering. - Boca Raton : Auerbach Publications. - 9781420068412 ; , s. 477-496
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
    • This chapter discusses how to deal with scenarios as previous presented by putting a value on flexibility in the system solution. Thereby, it becomes clearer when to focus on short-term solutions and when to keep the long-term evolution of a product line in mind. The approach taken is to evaluate flexibility using a concept called Real Options. The method is motivated and described by using as an example an industrial area where very complex product lines occur, namely automotive embedded systems. To improve the usability of the method, a structured evaluation process is defined to aid practitioners such as developers and architects. The evaluation process provides a way of valuing system designs and enables the practitioner to think about the future in a systematic manner. The value of a flexible design can thereby be quantified, and the proposed process shows how it can be accepted by practitioners within the automotive industry.
  •  
30.
  • Gustavsson, Håkan, et al. (författare)
  • Evaluation of design options in embedded automotive product lines
  • 2009
  • Ingår i: Applied Software Product Line Engineering. - : CRC Press. - 9781420068429 - 9781420068412 ; , s. 477-496
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
    • In many industries, complex embedded product lines are designed. In theory, this follows a structured and well-organized process, where a set of given requirements is transformed step by step into an optimal product. However, in reality the complexity of the products and markets often lead to much less stringent ways of working. Let us consider a fictional, but not atypical, scenario. 
  •  
31.
  • Gustavsson, Håkan, et al. (författare)
  • Improving the system architecting process through the use of Lean tools
  • 2010
  • Ingår i: Portland International Conference on Management of Engineering and Technology. - Phuket, Thailand. - 1890843229 ; , s. 1601-1607
  • Konferensbidrag (refereegranskat)abstract
    • The impact of embedded systems within the automotive industry has grown very rapidly and is today influencing most part of the product development process. This technological change puts high demands on the development process in order for the company to stay competitive. The architecting process is performed during the early phases of the development process when uncertainty is very high. The architecting process will not create immediate value to the end customer, but rather create the architecture on which value in terms of product features can be developed. The architecture will enable value creation when working properly or, in the worst case, prevent value creation. Lean is a product development philosophy that aims at creating value for the end customer. A Lean tool used to improve the value creation within a process is Value Stream Mapping (VSM). VSM has in this work been adapted and evaluated to analyze and identify improvements of the architecting process within embedded systems development. In this paper we present practical experiences from using this adapted VSM. The evaluation was conducted through interviews at two automotive manufacturers. VSM is shown to be a valuable tool to identify waste and thereby improve the architecting process.
  •  
32.
  • Gustavsson, Håkan, 1977- (författare)
  • Lean Thinking Applied to System Architecting
  • 2011
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Software intensive systems are an increasing part of new products, which make the business impact significant. This is especially true for the automotive industry where a very large part of new innovations are realized through the use of software. The architecture of the software intensive system will enable value creation when working properly or, in the worst case, prevent value creation.  Lean thinking is about focusing on the increase of customer value and on the people who add value. This thesis investigates how system architecting is performed in industry and how it can be improved by the use of Lean thinking. The architecting process does not create immediate value to the end customer, but rather create the architecture on which value in terms of product features and functionality can be developed. A Lean tool used to improve the value creation within a process is Value Stream Mapping (VSM). We present a method based on VSM which is adapted to enable analysis of the architecting process in order to identify improvements.  A study of architecting at two companies shows what effect differences such as a strong line organization or a strong project organization has on the architecting process. It also shows what consequence technical choices and business strategy have on the architecting process. In order to improve the understanding of how architecting is performed a study including architects at six different internationally well-known companies have been interviewed. The study presents the practices that are found most successful. The context of the different companies as well as the architecting practices are compared and analyzed.  The early design decisions made when developing software-intensive systems are crucial to the outcome of development projects. In order to improve the decision making process a method was developed based on Real Options. The method improves the customer focus of critical design decision by taking the value of flexibility into account.  This thesis provides a toolbox of knowledge on how Lean thinking can be applied to system architecting and also presents how architecting is performed in industry today.
  •  
33.
  • Gustavsson, Håkan, et al. (författare)
  • Using Real Options In Embedded Automotive System Design
  • 2008
  • Konferensbidrag (refereegranskat)abstract
    • The automotive customers demand new functionality with every new product release and the time-to-market is constantly shortened. The automotive embedded systems are characterized by being mechatronic systems which adds complexity. The systems are often resource constrained and trade-offs between the system behaviour and the resources required is of great importance. The system complexity and the many uncertain factors create a need for support in the design process. Many design features such as memory and processor capacity can be seen as options, i.e. giving you the right but not the obligation to use them in the future. The valuation method using Real Options provides the opportunity to analyze the cost of designing for future growth of a platform, based on the estimated value of the future functionality.In this paper the use of Real Options is applied on a real case within the automotive industry. The studied company develops commercial vehicles for a broad range of applications. In this case study a valuation is performed on two different design alternatives of function allocation. The design alternatives vary in hardware, software, cabling etc. The case study has been per-formed together with the developing organization and it has therefore been possible to observe the acceptance of the method. The study shows how Real Option valuation provides valuable guidance when making system design decisions and more importantly also show how it can be used and accepted by system engineers. The method does not only provide a way of valuing sys-tem designs, but it also forces the system engineer to think about the future in a systematic manor. The value of a flexible design can thereby be quantified making the trade-off between short and long term solutions more accurate.
  •  
34.
  • Gustavsson, Jakob (författare)
  • Book Review
  • 1997
  • Ingår i: Cooperation and Conflict. - 0010-8367. ; 32:2
  • Recension (övrigt vetenskapligt/konstnärligt)
  •  
35.
  •  
36.
  • Gustavsson, Jakob, et al. (författare)
  • Development and comparison of gas chromatography-mass spectrometry techniques for analysis of flame retardants
  • 2017
  • Ingår i: Journal of Chromatography A. - : Elsevier BV. - 0021-9673 .- 1873-3778. ; 1481, s. 116-126
  • Tidskriftsartikel (refereegranskat)abstract
    • The restrictions on the use of legacy flame retardants (FRs) have increased the need of alternative FRs to comply with fire safety legislations. In this study, the feasibility of three different gas chromatography mass spectrometry (GC MS) techniques were investigated for the analysis of 102 legacy and alternative FRs including polybrominated diphenyl ethers (PBDEs, n =27), halogenated FRs (HFRs, containing bromine and/or chlorine, n = 46), and organophosphorous FRs (OPFRs, n = 29). The tested techniques included GC-single MS with (i) electon impact (EI) ionization and (ii) negative chemical ionization (NCI), and (iii) GC-tandem MS (MS/MS) with EI ionization. Out of the tested FRs, 90 could be detected under the used conditions on at least one of the three instrument setups. Later experiments included a selection of these FRs. For the majority of tested PBDEs (5 out of 6) and HFRs (24 out of 26), El-MS/MS provided the highest detectability (i.e. the lowest detection limits), while for most tested OPFRs (8 out of 13), El-MS performed better. The influence of matrix components on the analysis of FRs (n = 45) was investigated by analyzing a fortified surface water sample with the technique with the lowest selectivity, El-MS. Both peak enhancement and suppression were observed, and significant correlations between matrix effects and several physico-chemical properties (e.g., retention time and boiling point) were found for PBDEs. In a separate clean-up experiment using natural water spiked with legacy and alternative FRs (n = 30), alumina provided the highest mean recovery (90%) in comparison to acidified silica (67%) and Florisil (78%). This study provides new knowledge on analysis of FRs including a wide range of alternative FRs, and it will aid in the efforts of FR monitoring in the environment. (C) 2016 Elsevier B.V. All rights reserved.
  •  
37.
  •  
38.
  •  
39.
  • Gustavsson, Jakob, et al. (författare)
  • Influence of natural organic matter on the extraction efficiency of flame retardants from surface waters
  • 2017
  • Ingår i: Journal of Chromatography A. - : Elsevier BV. - 0021-9673 .- 1873-3778. ; 1524, s. 74-86
  • Tidskriftsartikel (refereegranskat)abstract
    • The influence of natural organic matter (NOM) on the solid-phase extraction (SPE) efficiency was investigated for legacy and emerging flame retardants (FRs; n =26) in surface water. Three different groups of FRs were analyzed: polybrominated diphenyl ethers (PBDEs), halogenated flame retardants (HFRs), and organophosphorus flame retardants (OPFRs). In addition, five sorbents (Amberlite XAD-2, Amberlite IRA-743, Oasis HLB, Chromabond HR-P, and Chromabond HR-X) were evaluated for the extraction of FRs (n=33) in water, of which Oasis HLB eluted with dichloromethane and acetone:n-hexane (1:1, v/v) provided the highest overall recoveries. In subsequent NOM experiments, where FRs were extracted from water containing different NOM concentrations, both increased and decreased extraction efficiency with increasing NOM level were observed. Physicochemical and semi-empirical quantum chemistry properties were calculated for the FRs and used for analyzing relations between FRs. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) showed that the FRs separated into four different groups based on their properties. The FRs within each group responded similarly to increasing NOM, while differences in behavior were observed between the groups. This suggests that the structural properties of micropollutants highly influence NOM-FR interaction mechanisms. For instance, at high NOM levels, recoveries decreased substantially for FRs containing a moiety that can form strong hydrogen bonds (such as the double-bonded oxygen in e.g., OPFRs). Many of the compounds showed maximum extraction efficiency at higher levels of NOM. This suggests that binding of NOM to the sorbent and subsequent interaction between sorbent-bound NOM and FRs is an important mechanism for extraction of micropollutants from surface waters. (C) 2017 Elsevier B.V. All rights reserved.
  •  
40.
  • Gustavsson, Jakob, et al. (författare)
  • Kontrollen av de hemliga tjänsterna
  • 2002
  • Ingår i: På historiens slagfält. Festskrift till Sverker Oredsson.
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)
  •  
41.
  • Gustavsson,, Jakob, et al. (författare)
  • Omanalys av flamskyddsmedel i svenska vattendrag
  • 2016
  • Rapport (övrigt vetenskapligt/konstnärligt)abstract
    • Syftet med den här studien var att få en ögonblicksbild av halterna av flamskyddsmedel i svenska vattendrag. Provtagningen ägde rum i oktober 2013, och resultaten från den provtagningen har rapporterats tidigare (Ahrens et al. 2014). Analysmetodiken har sedan dess förbättrats och det beslutades därför att provextrakten från den tidigare studien skulle analyseras på nytt. Resultaten från omanalysen presenteras i denna rapport.Totalt analyserades 61 flamskyddmedel i denna studie. Det högsta antalet ämnen detekterades i Nyköpingsån (22) och Indalsälven (16). De mest frekvent förekommande ämnena var ΣTDCIPP/TEHP (kvantifierade som en totalhalt tillsammans) som detekterades i alla 25 proverna från norr till söder, följt av TCEP (detekterad i 15 prover) och TBBPA (detekterad i 11 prover). Högst sammanlagd koncentration av flamskyddsmedel uppmättes i Nyköpingsån (240 ng L-1), Fyrisån (230 ng L-1) och Indalsälven (140 ng L-1). Generellt var koncentrationerna av flamskyddsmedel högre i södra Sverige än i norra vilket sannolikt kan förklaras av den högre populationstätheten i söder. Den dagliga tillförseln av flamskyddsmedel från vattendragen till Östersjön uppskattades. Indalsälven och Nyköpingsån uppvisade de högsta värdena med 5,2 och 4,9 kg/dag. Båda dessa vattendrag hade en likartad fördelning av flamskyddsmedel med TEBP-Anh (~30% av ΣFRs), TCBPA (~23% av ΣFRs) och TBBPA (~30% av ΣFRs) som dominerande ämnen. Detta indikerar att det främst är dessa tre flamskyddsmedel som transporteras till Östersjön via svenska vattendrag.Eftersom denna studie ger en ögonblicksbild av mängden flamskyddsmedel i svenska vattendrag måste resultaten tolkas med försiktighet. Denna typ av studie är dock användbar för att få en generell uppfattning om föroreningsnivåer och för att upptäcka platser med förhöjd förorening, s.k. hot-spots. För att få en bättre insikt i föroreningssituationen krävs ytterligare studier med en annan provtagningsstrategi, t.ex. provtagning under längre tidsperioder (och under olika årstider) och mer frekvent provtagning alternativt tids- /flödesproportionell provtagning.
  •  
42.
  • Gustavsson, Jakob, et al. (författare)
  • Re-analysis of organic flame retardants in Swedish rivers
  • 2016
  • Rapport (övrigt vetenskapligt/konstnärligt)abstract
    • Flame retardants (FRs) are used in everyday products such as furniture and electronics to provide fire protection. The intensive use of FRs has led to their wide spread in the environment. Many chemicals have been found to have bioaccumulative, persistent and toxic properties which have led to a ban of some of these FR compounds based on international agreements. For example, Penta- and octa-polybrominated diphenyl ethers (BDEs) have been included in the Stockholm Convention. However, most FRs are not restricted, and in many cases it is not known to which extent they are used or to which degree they are polluting the environment. The aim of this study was to provide a snapshot of the current FR pollution in Swedish rivers and streams. In total, 25 rivers and streams were sampled along the east coast of Sweden from north to south. The sampling was done in October 2013 and results from this pre-study were presented previously (Ahrens et al. 2014). Since then, the analytical method for FRs has been improved, and here we report on the re-analysis of the extracts from the previous study. In total 61 (including 7 PBDEs, 35 AFRs, 19 OPFRs), mainly novel FRs, were included in the analytical method. The highest number of FRs was detected in Nyköpingsån (22) and Indalsälven (16). The most frequently detected FRs were ∑tris(1,3-dichloroisopropyl) phosphate/tris(2-ethylhexyl) phosphate) (ΣTDCIPP/TEHP, quantified as the sum of both) detected in all 25 samples from north to south, followed by tris(2-chloroethyl) phosphate (TCEP) (detected in 15 samples) and tetrabromobisphenol-A (TBBPA) (detected in 11 samples). The highest FR concentrations were observed in Nyköpingsån, Fyrisån and Indalsälven with ∑FR concentrations of 240, 230 and 140 ng L-1, respectively. It is evident that FR concentrations in general are higher in the south than in the north, likely explained by the higher population density in the south. Daily loads of ∑FRs transported from Swedish rivers into the Baltic Sea were estimated to be in total 15 kg/day. Indalsälven and Nyköpingsån showed highest total daily loads with 5.2 and 4.9 kg/day, respectively. The composition profiles of these two rivers showed a similar pattern with 3,4,5,6-Tetrabromophthalic anhydride (TEBP-Anh, ~30% of the ∑FR), Tetrachlorobisphenol-A (TCBPA, ~23% of the ∑FR) and TBBPA (~30% of the ∑FR) as the major FRs indicating that these are the three main FRs transported into the Baltic Sea from Swedish rivers. Since this study only provides a snapshot of current conditions, care needs to be taken in the interpretation of the results. This type of screening study is, however, useful for getting a general idea on pollution levels and revealing of tentative hot spots. For better insight into the pollution situation, another sampling strategy is neded, e.g. covering longer time periods (and different seasons) and using more frequent sampling or time/flow-proportional sampling.
  •  
43.
  • Gustavsson, Jakob (författare)
  • Recension
  • 1992
  • Ingår i: Statsvetenskaplig tidskrift. - 0039-0747. ; 95:3
  • Recension (övrigt vetenskapligt/konstnärligt)
  •  
44.
  • Gustavsson, Jakob (författare)
  • Recension
  • 2003
  • Ingår i: Internationella Studier. - 0020-952X. ; :3
  • Recension (populärvet., debatt m.m.)
  •  
45.
  •  
46.
  • Gustavsson, Jakob, et al. (författare)
  • Replacement substances for the brominated flame retardants PBDE, HBCDD, and TBBPA
  • 2017
  • Rapport (övrigt vetenskapligt/konstnärligt)abstract
    •  A literature and database review was conducted with the aim of identifying new alternative flame retardants (FRs) used as replacement chemicals for the traditionally used polybrominated diphenylethers (PBDEs) and hexabromocyclododecane (HBCDD), and also for tetrabromobisphenol-A (TBBPA). Firstly, selected patents from the US patent database were studied and a number of alternative FRs could be identified, including, e.g., pentaerythritol, melamine, and bis-(t-butylphenyl) phenyl phosphate. Secondly, two databases, containing quantity information on usage from Sweden and the EU, were searched to obtain usage data. In Sweden, the FR that is used in the highest quantities is pentaerythritol, followed by e.g., short-chained chlorinated paraffins (SCCPs), 2-ethylhexyl diphenyl phosphate (EHDPP), 1,2-bis(2,4,6-tribromophenoxy) ethane (BTBPE), and tetrabromobisphenol-A-bis(2,3-dibromopropyl) ether (TBBPA-BDBPE). In the EU, pentaerythritol and melamine are used in the highest quantities, followed by e.g., SCCPs, MCCPs, 1,2-bis(2,3,4,5,6-pentabromophenyl)ethane (DBDPE), and triethyl phosphate (TEP). From the Swedish database, exposure indices were obtained, indicating the potential of exposure for different environmental compartments to different FRs. The highest average potential of exposure was found for pentaerythritol, tributyl phosphate (TNBP), triphenyl phosphate (TPHP), SCCPs, and tritolyl phosphate (TMPP). In addition, time trends in the potential of exposure were obtained from the database and showed increasing trends for TBBPA-BDBPE, tris(tribromoneopentyl) phosphate (TTBNPP), DBDPE, Resorcinol bis(diphenyl phosphate) (PBDPP), TMPP, and cresyl diphenyl phosphate (CDP). Thirdly, the open literature (including international peer-reviewed articles and reports from environmental authorities), was reviewed in search for previously reported environmental concentrations of emerging FRs in indoor dust, indoor and outdoor air, water, sediment, sludge, soil, atmospheric deposition, plants and animals including humans. In total, 66 different FRs were detected in at least one of the studied matrices. In addition, six prioritization lists were identified, which included about 50 different FRs that were suggested to be of high environmental relevance. Finally, to be able to prioritize between the identified FRs for future screenings, a multicriteria model was developed based on (i) usage, (ii) time trends in the potential of exposure, (iii) environmental detection, and (iv) previous publication lists. From this multicriteria model, the top ten FRs were: TBBPA-BDBPE, DBDPE, BTBPE, TTBNPP, bis(2-ethyl-1-hexyl)tetrabromophthalate (BEH-TEBP), ethylene bis-tetrabromo phtalimide (EBTEBPI), PBDPP, para-TMPP, TPHP, and tri(1-chloro-2-propyl) phosphate (TCIPP). These FRs are suggested to be prioritized in future screenings.
  •  
47.
  •  
48.
  • Gustavsson, Jakob, et al. (författare)
  • Screening of organic flame retardants in Swedish river water
  • 2018
  • Ingår i: Science of the Total Environment. - : Elsevier BV. - 0048-9697 .- 1879-1026. ; 625, s. 1046-1055
  • Tidskriftsartikel (refereegranskat)abstract
    • Alternative flame retardants (FRs) have now replaced legacy FRs (such as polybrominated diphenyl ethers, PBDEs), but little is known about their fate in the aquatic environment. In this study, a range of legacy FRs (0 = 10) and alternative FRs, including halogenated FRs (HFRs, n = 32) and organophosphorus FRs (OPFRs, n = 19), were screened in water samples collected from 23 rivers covering the whole latitudinal range of Sweden. Of the 61 targeted ERs, 26 were detected in at least one of the river samples, with Sigma FR concentrations ranging up to 170 ng L-1 (mean 31 +/- 45 ng L-1). In general, higher concentrations and a larger variety of FRs were detected in southern Sweden (Sigma ER = 60 +/- 56 ng L-1) compared with the north (3 ER 9.0 +/- 16 ng L-1). In the south, HFRs were dominant, constituting on average 59% of Sigma Rs, whereas in the north, OPFRs were dominant, constituting on average 82% of 11, Sigma Rs. This difference was best explained by higher population density in the south. The total daily flux of FRs into the Baltic Sea was estimated to be similar to 31 kg and comprised mainly tetrabromobisphenol-A (TBBPA), 3,4,5,6-tetrabromophthalic anhydride (TEBP-Anh), and 2,4,6-tribromophenol (TBP). To the best of our knowledge, this is the first report of environmental occurrence of TEBP-Anh, which was detected in two rivers and is suggested to originate from airports located near the sampling sites. (C) 2018 Elsevier B.V. All rights reserved.
  •  
49.
  • Gustavsson, Jakob, et al. (författare)
  • Screening of replacement substances for the brominated flame retardants PBDE, HBCDD and TBBPA
  • 2018
  • Rapport (övrigt vetenskapligt/konstnärligt)abstract
    • Målet med projektet var att identifiera akvatiska punktkällor för flamskyddsmedel (FRs) till den svenska miljön. Detta gjordes genom att mäta halter i olika typer av vattenflöden och beräkna dagliga flöden av FRs med hjälp av vattenmassaflöden. De verksamheter som undersöktes inkluderade avloppsreningsverk (n = 5), avfallsanläggningar (n = 4), flygplatser (n = 5), industrier (n = 2), dagvatten från stads/industriområden (n = 6) samt lantbruk (n = 2). Vatten- (n = 42) och partikelprover (n = 42) samlades in under februari-april 2018 och analyserades för totalt 62 olika FRs från tre olika ämnesklasser: halogenerade FRs (HFRs), organofosfater (OPFRs) och polybromerade difenyletrar (PBDEs).Totalt detekterades 34 olika FRs i minst ett prov. Flest antal olika FRs hittades i provet från en avfallsanläggning (Högbytorp; n = 23), följt av Skavsta flygplats (n = 17), Ärna flygplats (n = 16) och Ryaverket avloppsreningsverk (n = 16). I genomsnitt hittades flest flamskyddsmedel vid avfallsanläggningar (n = 15 ± 5), följt av avloppsreningsverk (n = 13 ± 3), dagvatten (n = 11 ± 2), flygplatser (n = 9 ± 6) och industri (n = 5 ± 1). TDCIPP var det FR som detekterades i flest antal prover (78 % av alla prover), följt av BDE66 (68 %), TEHP (57 %), TCIPP (57 %) och TBOEP (57 %).Den totala halten FRs i proverna varierade mellan De beräknade flödena av FRs varierade mellan
  •  
50.
  • Gustavsson, Jakob, et al. (författare)
  • Seasonal trends of legacy and alternative flame retardants in river water in a boreal catchment
  • 2019
  • Ingår i: Science of the Total Environment. - : Elsevier BV. - 0048-9697 .- 1879-1026. ; 692, s. 1097-1105
  • Tidskriftsartikel (refereegranskat)abstract
    • Boreal forests store large amounts of atmospherically deposited (semi-)persistent organic pollutants ( POPs). The terrestrial POPs may be exported to streams and rivers through processes that are heavily impacted by seasonality. In this screening study, concentrations of 4 legacy and 45 alternative flame retardants (FRs) were determined in the dissolved and particulate phase in streams within a relatively pristine boreal catchment in northern Europe (Krycklan Catchment Study; 3 sites) and in rivers more impacted by human activities further downstream towards the Baltic Sea (3 sites). The sampling included the main hydrological seasons (snow-free, snow-covered, and spring flood) and was conducted during two consecutive years (2014-2016). Of the 49 analyzed Ills, 11 alternative halogenated FRs (HFRs), 13 alternative organophosphorus FRs (OPFRs), and 4 legacy polybrominated diphenyl ethers (PBDEs) were detected in at least one sample. The average bulk (dissolved + particulate) concentrations of Sigma FRs (including all sites) were highest for Sigma HFRs (38 +/- 70 ng L-1), followed by the Sigma OPFRs (3.9 +/- 4.9 ng L-1) and the Sigma PBDEs (0.0040 +/- 0.016 ng L-1). Bulk concentrations of HFRs, OPFRs, and PBDEs were highly variable with season and sampling location, e.g., during spring flood, bulk concentrations were up to 600 times, 3.7 times, and 4.9 times higher for HFRs, OPFRs and PBDEs, respectively, than during periods of lower flow. Bulk concentrations of Sigma OPFRs, were elevated at all sites similar to 6 days before the actual start of the spring flood in 2015, suggesting that hydrophobicity fractionation had occurred within the snowpack. Similar to previous studies of other POPs in the same headwater catchment, there was a general trend that levels of Sigma FRs were higher at the mire site than at the forested site. Annual fluxes of FRs were found to be similar to 15 times higher downstream the city of Umea compared to at the outlet of the pristine catchment. This study should be regarded as a screening study considering the large number of diverse FRs analyzed and variability in the results. (C) 2019 Elsevier B.V. All rights reserved.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-50 av 76
Typ av publikation
bokkapitel (21)
tidskriftsartikel (17)
konferensbidrag (11)
rapport (9)
samlingsverk (redaktörskap) (5)
recension (4)
visa fler...
annan publikation (3)
doktorsavhandling (3)
bok (2)
licentiatavhandling (1)
visa färre...
Typ av innehåll
övrigt vetenskapligt/konstnärligt (44)
refereegranskat (28)
populärvet., debatt m.m. (4)
Författare/redaktör
Gustavsson, Jakob (49)
Ahrens, Lutz (15)
Wiberg, Karin (15)
Tallberg, Jonas (13)
Josefsson, Sarah (12)
Axelsson, Jakob (11)
visa fler...
Minh Nguyen, Anh (10)
Ribeli, Erik (6)
Badersten, Björn (6)
Laudon, Hjalmar (2)
Sundbom, Magnus (2)
Nguyen, Minh Anh (2)
Dahlin, Jakob (2)
Aggestam, Karin (1)
Kronsell, Annica (1)
Karlsson, Magnus (1)
Kogner, Per (1)
Jönsson, Karin (1)
Bruze, Magnus (1)
Nilsson, Sven (1)
Björkdahl, Annika (1)
Kinnvall, Catarina (1)
Futter, Martyn (1)
Amnér, Gunilla (1)
Spanne, Mårten (1)
Möller, Halvor (1)
Gruvberger, Birgitta (1)
Grandsjö, Linda (1)
Gustavsson, Bengt, 1 ... (1)
Quiding-Järbrink, Ma ... (1)
Karlsson, Daniel (1)
Persson, Lena (1)
Teneberg, Susann, 19 ... (1)
Yrlid, Ulf, 1971 (1)
Siesjö, Peter (1)
Hedlund, Maria (1)
Anving, Terese (1)
Lindgren, Karin (1)
Wallensteen, Peter (1)
Gerner, Annika (1)
Cervin, Jakob (1)
Ljungman, Gustaf, 19 ... (1)
Svedman, Cecilia (1)
Persson, Christer (1)
Sandgren, Johanna (1)
Karlsson, Henrik (1)
Andersson, Lars M (1)
Gustavsson, Bengt (1)
de Ståhl, Teresita D ... (1)
Bäckstrand, Karin (1)
visa färre...
Lärosäte
Lunds universitet (34)
Mälardalens universitet (11)
Sveriges Lantbruksuniversitet (11)
Uppsala universitet (6)
Naturvårdsverket (6)
Stockholms universitet (3)
visa fler...
Göteborgs universitet (2)
Örebro universitet (2)
RISE (2)
Karolinska Institutet (2)
Umeå universitet (1)
Linköpings universitet (1)
Södertörns högskola (1)
visa färre...
Språk
Engelska (42)
Svenska (32)
Norska (1)
Italienska (1)
Forskningsämne (UKÄ/SCB)
Samhällsvetenskap (36)
Naturvetenskap (25)
Teknik (3)
Medicin och hälsovetenskap (3)
Humaniora (1)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy