| 1. |
- Chen, Yuqing, et al.
(författare)
-
Breaking solvation dominance of ethylene carbonate via molecular charge engineering enables lower temperature battery
- 2023
-
Ingår i: Nature Communications. - : Springer Nature. - 2041-1723. ; 14
-
Tidskriftsartikel (refereegranskat)abstract
- Low temperatures severely impair the performance of lithium-ion batteries, which demand powerful electrolytes with wide liquidity ranges, facilitated ion diffusion, and lower desolvation energy. The keys lie in establishing mild interactions between Li+ and solvent molecules internally, which are hard to achieve in commercial ethylene-carbonate based electrolytes. Herein, we tailor the solvation structure with low-ε solvent-dominated coordination, and unlock ethylene-carbonate via electronegativity regulation of carbonyl oxygen. The modified electrolyte exhibits high ion conductivity (1.46 mS·cm−1) at −90 °C, and remains liquid at −110 °C. Consequently, 4.5 V graphite-based pouch cells achieve ~98% capacity over 200 cycles at −10 °C without lithium dendrite. These cells also retain ~60% of their room-temperature discharge capacity at −70 °C, and miraculously retain discharge functionality even at ~−100 °C after being fully charged at 25 °C. This strategy of disrupting solvation dominance of ethylene-carbonate through molecular charge engineering, opens new avenues for advanced electrolyte design.
|
|
| 2. |
- Chen, Yuqing, et al.
(författare)
-
A review of lithium-ion battery safety concerns : the issues, strategies, and testing standards
- 2021
-
Ingår i: Journal of Energy Chemistry. - : Elsevier. - 2095-4956 .- 2096-885X. ; 59, s. 83-99
-
Tidskriftsartikel (refereegranskat)abstract
- Efficient and reliable energy storage systems are crucial for our modern society. Lithium-ion batteries (LIBs) with excellent performance are widely used in portable electronics and electric vehicles (EVs), but frequent fires and explosions limit their further and more widespread applications. This review summarizes aspects of LIB safety and discusses the related issues, strategies, and testing standards. Specifically, it begins with a brief introduction to LIB working principles and cell structures, and then provides an overview of the notorious thermal runaway, with an emphasis on the effects of mechanical, electrical, and thermal abuse. The following sections examine strategies for improving cell safety, including approaches through cell chemistry, cooling, and balancing, afterwards describing current safety standards and corresponding tests. The review concludes with insights into potential future developments and the prospects for safer LIBs.
|
|
| 3. |
- Du, Hao, et al.
(författare)
-
Side reactions/changes in lithium-ion batteries : mechanisms and strategies for creating safer and better batteries
- 2024
-
Ingår i: Advanced Materials. - : John Wiley & Sons. - 0935-9648 .- 1521-4095.
-
Forskningsöversikt (refereegranskat)abstract
- Abstract Lithium-ion batteries (LIBs), in which lithium ions function as charge carriers, are considered the most competitive energy storage devices due to their high energy and power density. However, battery materials, especially with high capacity undergo side reactions and changes that result in capacity decay and safety issues. A deep understanding of the reactions that cause changes in the battery's internal components and the mechanisms of those reactions is needed to build safer and better batteries. This review focuses on the processes of battery failures, with voltage and temperature as the underlying factors. Voltage-induced failures result from anode interfacial reactions, current collector corrosion, cathode interfacial reactions, overcharge, and overdischarge, while temperature-induced failure mechanisms include SEI decomposition, separator damage, and interfacial reactions between electrodes and electrolytes. The review also presents protective strategies for controlling these reactions. As a result, the reader is offered a comprehensive overview of the safety features and failure mechanisms of various LIB components.
|
|
| 4. |
- Kang, Yuqiong, et al.
(författare)
-
Phosphorus-doped lithium- and manganese-rich layered oxide cathode material for fast charging lithium-ion batteries
- 2021
-
Ingår i: Journal of Energy Chemistry. - : Elsevier. - 2095-4956 .- 2096-885X. ; 62, s. 538-545
-
Tidskriftsartikel (refereegranskat)abstract
- Owing to their high theoretical specific capacity and low cost, lithium- and manganese-rich layered oxide (LMR) cathode materials are receiving increasing attention for application in lithium-ion batteries. However, poor lithium ion and electron transport kinetics plus side effects of anion and cation redox reactions hamper power performance and stability of the LMRs. In this study, LMR Li1.2Mn0.6Ni0.2O2 was modified by phosphorus (P)-doping to increase Li+ conductivity in the bulk material. This was achieved by increasing the interlayer spacing of the lithium layer, electron transport and structural stability, resulting in improvement of the rate and safety performance. P5+ doping increased the distance between the (003) crystal planes from ∼0.474 nm to 0.488 nm and enhanced the structural stability by forming strong covalent bonds with oxygen atoms, resulting in an improved rate performance (capacity retention from 38% to 50% at 0.05 C to 5 C) and thermal stability (50% heat release compared with pristine material). First-principles calculations showed the P-doping makes the transfer of excited electrons from the valence band to conduction band easier and P can form a strong covalent bond helping to stabilize material structure. Furthermore, the solid-state electrolyte modified P5+ doped LMR showed an improved cycle performance for up to 200 cycles with capacity retention of 90.5% and enhanced initial coulombic efficiency from 68.5% (pristine) or 81.7% (P-doped LMR) to 88.7%.
|
|
| 5. |
|
|
| 6. |
- Zhao, Yun, et al.
(författare)
-
Rational design of functional binder systems for high-energy lithium-based rechargeable batteries
- 2021
-
Ingår i: Energy Storage Materials. - : Elsevier. - 2405-8289 .- 2405-8297. ; 35, s. 353-377
-
Tidskriftsartikel (refereegranskat)abstract
- Binders, which maintain the structural integrity of electrodes, are critical components of lithium-based rechargeable batteries (LBRBs) that significantly affect battery performances, despite accounting for 2 to 5 wt% (up to 5 wt% but usually 2 wt%) of the entire electrode. Traditional polyvinylidene fluoride (PVDF) binders that interact with electrode components via weak van der Waals forces are effective in conventional LBRB systems (graphite/LiCoO2, etc.). However, its stable fluorinated structures limit the potential for further functionalization and inhibit strong interactions towards external substances. Consequently, they are unsuitable for next-generation battery systems with high energy density. There is thus a need for new functional binders with facile features compatible with novel electrode materials and chemistries. Here in this review we consider the strategies for rationally designing these functional binders. On the basis of fundamental understandings of the issues for high-energy electrode materials, we have summarized seven desired functions that binders should possess depending on the target electrodes where the binders will be applied. Then a variety of leading-edge functional binders are reviewed to show how their chemical structures realize these above functions and how the employment of these binders affects the cell's electrochemical performances. Finally the corresponding design strategies are therefore proposed, and future research opportunities as well as challenges relating to LBRB binders are outlined.
|
|
